DENVER INTERNATIONAL AIRPORT RECONSTRUCTION OF ON PEÑA BOULEVARD 2 ND CREEK TO 64 TH AVENUE ADDENDUM NUMBER ONE. Scope of this Addendum

Size: px

Start display at page:

Download "DENVER INTERNATIONAL AIRPORT RECONSTRUCTION OF ON PEÑA BOULEVARD 2 ND CREEK TO 64 TH AVENUE ADDENDUM NUMBER ONE. Scope of this Addendum"

Amelia Hudson
6 years ago
Views:

2 DENVER INTERNATIONAL AIRPORT RECONSTRUCTION OF ON PEÑA BOULEVARD 2 ND CREEK TO 64 TH AVENUE ADDENDUM NUMBER ONE Scope of this Addendum Addendum Number One includes modifications to the following Contract Documents issued January 12, These modifications are deemed necessary by the City and County of Denver. PART ONE, VOL. 1 CONTRACT DOCUMENTS INSTRUCTIONS TO BIDDERS, PREVAILING WAGES: Replace the Prevailing Wage Rate Schedule for HIGHWAY CONSTRUCTION PROJECTS, Modification No. 0, Publication Date (11 pages) attached hereto. BID FORMS: Replace Letter of Intent Form for clarity PROJECT DRAWINGS The following plan sheets are being replaced as they have been revised: Replace Sheet Number 5 - General Notes Under Construction there are two (2) corrections in Note Number 8 Replace Sheet Number 6 General Notes Under Construction Notes 16, 17, 18 and 19 and Under Concrete Paving and Jointing Note 6 are added and attached hereto. The total number of pages (including cover sheet) contained in this Addendum Number One is two (2) and three (3) attachments.

3 Career r Service Authority Denver s Human Resource Agency 201 W. Colfax, Department 412 Denver, CO p: f: TO: FROM: All Users of the City of Denver Prevailing Wage Schedules Meredith Creme, Associate Human Resource Professional DATE: Friday January 13, 2012 SUBJECT: Latest Change to Prevailing Wage Schedules Please be advised, prevailing wage rates for some building, heavy, and highway construction trades have not been updated by the United States Department of Labor (DOL) since March 1, The Career Service Authority Board, in their meeting held on April 21, 2011, approved the use of the attached supplemental wage rates until prevailing wage rates for these classifications of work are again published by the United States Department of Labor in accordance with the Davis-Bacon Act. The rates will be provided as a supplemental to the Davis-Bacon Highway rates issued by CSA. The effective date for this publication is Friday January 13, 2012 and applies to the City and County of Denver for HIGHWAY CONSTRUCTION PROJECTS in accordance with the Denver Revised Municipal Code, Section 20-76(c). General Wage Decision No. CO Superseded General Decision No. CO Modification No. 0 Publication Date: (11 pages) Unless otherwise specified in this document, apprentices shall be permitted only if they are employed pursuant to, and individually registered in, a bona fide apprenticeship program registered with the U.S. Department. Of Labor (DOL). The employer and the individual apprentice must be registered in a program, which has received prior approval, by the DOL. Any employer, who employs an apprentice and is found to be in violation of this provision, shall be required to pay said apprentice the full journeyman scale. For questions call (720) Attachments as listed above.

4 General Decision Number: CO /06/2012 CO19 Superseded General Decision Number: CO State: Colorado Construction Type: Highway Counties: Denver and Douglas Counties in Colorado. HIGHWAY CONSTRUCTION PROJECTS Modification Number Publication Date 0 01/06/2012 CARP /01/2010 Rates Fringes CARPENTER (Form Work Only)...$ ELEC /01/2011 Rates Fringes TRAFFIC SIGNALIZATION: Traffic Signal Installation Zone 1...$ %+8.68 Zone 2...$ %+8.68 TRAFFIC SIGNAL INSTALLER ZONE DEFINITIONS Zone 1 shall be a 35 mile radius, measured from the following addresses in each of the following cities: Colorado Springs - Nevada & Bijou Denver - Ellsworth Avenue & Broadway Ft. Collins - Prospect & College Grand Junction - 12th & North Avenue Pueblo - I-25 & Highway 50 All work outside of these areas shall be paid Zone 2 rates ENGI /01/2011 Rates Fringes POWER EQUIPMENT OPERATOR: (3)-Hydraulic Backhoe (Wheel Mounted, under 3/4 yds), Hydraulic Backhoe (Backhoe/Loader combination), Drill Rig Caisson (smaller than Watson 2500 and similar), Loader (up to and including 6 cu. yd.)...$ (3)-Loader (under 6 cu. yd.) Denver County...$ (3)-Motor Grader (bladerough) Douglas County...$

5 (4)-Crane (50 tons and under), Scraper (single bowl, under 40 cu. yd)...$ (4)-Loader (over 6 cu. yd) Denver County...$ (5)-Drill Rig Caisson (Watson 2500 similar or larger), Crane (51-90 tons), Scraper (40 cu.yd and over),...$ (5)-Motor Grader (bladefinish) Douglas County...$ (6)-Crane ( tons)...$ SUCO /15/2011 Rates Fringes CARPENTER (Excludes Form Work)...$ CEMENT MASON/CONCRETE FINISHER Denver...$ Douglas...$ ELECTRICIAN (Excludes Traffic Signal Installation)...$ FENCE ERECTOR (Excludes Link/Cyclone Fence Erection)...$ GUARDRAIL INSTALLER...$ HIGHWAY/PARKING LOT STRIPING:Painter Denver...$ Douglas...$ IRONWORKER, REINFORCING (Excludes Guardrail Installation)...$ IRONWORKER, STRUCTURAL (Includes Link/Cyclone Fence Erection, Excludes Guardrail Installation)...$ LABORER Asphalt Raker...$ Asphalt Shoveler...$ Asphalt Spreader...$ Common or General Denver...$ Douglas...$ Concrete Saw (Hand Held)...$ Landscape and Irrigation...$ Mason Tender- Cement/Concrete Denver...$ Douglas...$ Pipelayer

6 Denver...$ Douglas...$ Traffic Control (Flagger)...$ Traffic Control (Sets Up/Moves Barrels, Cones, Install Signs, Arrow Boards and Place Stationary Flags)(Excludes Flaggers)...$ PAINTER (Spray Only)...$ POWER EQUIPMENT OPERATOR: Asphalt Laydown Denver...$ Douglas...$ Asphalt Paver Denver...$ Douglas...$ Asphalt Roller Denver...$ Douglas...$ Asphalt Spreader...$ Backhoe/Trackhoe Douglas...$ Bobcat/Skid Loader...$ Boom...$ Broom/Sweeper Denver...$ Douglas...$ Bulldozer...$ Concrete Pump...$ Drill Denver...$ Douglas...$ Forklift...$ Grader/Blade Denver...$ Guardrail/Post Driver...$ Loader (Front End) Douglas...$ Mechanic Denver...$ Douglas...$ Oiler Denver...$ Douglas...$ Roller/Compactor (Dirt and Grade Compaction) Denver...$ Douglas...$ Rotomill...$ Screed Denver...$ Douglas...$ Tractor...$ TRAFFIC SIGNALIZATION: Groundsman Denver...$ Douglas...$

7 TRUCK DRIVER Distributor Denver...$ Douglas...$ Dump Truck Denver...$ Douglas...$ Lowboy Truck...$ Mechanic...$ Multi-Purpose Specialty & Hoisting Truck Denver...$ Douglas...$ Pickup and Pilot Car Denver...$ Douglas...$ Semi/Trailer Truck...$ Truck Mounted Attenuator...$ Water Truck Denver...$ Douglas...$ WELDERS - Receive rate prescribed for craft performing operation to which welding is incidental. ================================================================ Unlisted classifications needed for work not included within the scope of the classifications listed may be added after award only as provided in the labor standards contract clauses (29CFR 5.5 (a) (1) (ii)) The body of each wage determination lists the classification and wage rates that have been found to be prevailing for the cited type(s) of construction in the area covered by the wage determination. The classifications are listed in alphabetical order of "identifiers" that indicate whether the particular rate is union or non-union. Union Identifiers An identifier enclosed in dotted lines beginning with characters other than "SU" denotes that the union classification and rate have found to be prevailing for that classification. Example: PLUM /01/2011. The first four letters, PLUM, indicate the international union and the four-digit number, 0198, that follows indicates the local union number or district council number where applicable, i.e., Plumbers Local The next number, 005 in the example, is an internal number used in processing the wage determination. The date, 07/01/2011, following these characters is the effective date of the most current negotiated rate/collective bargaining agreement which would be July 1, 2011 in the above example.

8 Union prevailing wage rates will be updated to reflect any changes in the collective bargaining agreements governing the rate. Non-Union Identifiers Classifications listed under an "SU" identifier were derived from survey data by computing average rates and are not union rates; however, the data used in computing these rates may include both union and non-union data. Example: SULA /13/2010. SU indicates the rates are not union rates, LA indicates the State of Louisiana; 2004 is the year of the survey; and 007 is an internal number used in producing the wage determination. A 1993 or later date, 5/13/2010, indicates the classifications and rates under that identifier were issued as a General Wage Determination on that date. Survey wage rates will remain in effect and will not change until a new survey is conducted WAGE DETERMINATION APPEALS PROCESS 1.) Has there been an initial decision in the matter? This can be: * an existing published wage determination * a survey underlying a wage determination * a Wage and Hour Division letter setting forth a position on a wage determination matter * a conformance (additional classification and rate) ruling On survey related matters, initial contact, including requests for summaries of surveys, should be with the Wage and Hour Regional Office for the area in which the survey was conducted because those Regional Offices have responsibility for the Davis-Bacon survey program. If the response from this initial contact is not satisfactory, then the process described in 2.) and 3.) should be followed. With regard to any other matter not yet ripe for the formal process described here, initial contact should be with the Branch of Construction Wage Determinations. Write to: Branch of Construction Wage Determinations Wage and Hour Division U.S. Department of Labor 200 Constitution Avenue, N.W. Washington, DC ) If the answer to the question in 1.) is yes, then an interested party (those affected by the action) can request review and reconsideration from the Wage and Hour Administrator (See 29 CFR Part 1.8 and 29 CFR Part 7). Write to: Wage and Hour Administrator U.S. Department of Labor 200 Constitution Avenue, N.W.

9 Washington, DC The request should be accompanied by a full statement of the interested party's position and by any information (wage payment data, project description, area practice material, etc.) that the requestor considers relevant to the issue. 3.) If the decision of the Administrator is not favorable, an interested party may appeal directly to the Administrative Review Board (formerly the Wage Appeals Board). Write to: Administrative Review Board U.S. Department of Labor 200 Constitution Avenue, N.W. Washington, DC ) All decisions by the Administrative Review Board are final. ================================================================ END OF GENERAL DECISION

10 Career Service Authority Supplemental to the Davis-Bacon HIGHWAY Construction Projects rates (Specific to the Denver Projects) (Supp 35, Date: ) Classification Base Fringe Millwrights $28.00 $10.00 Line Construction: Lineman, Gas Fitter/Welder $36.88 $9.55 Line Eq Operator/Line Truck Crew $25.74 $8.09 Power Equipment Operators (Tunnels Above and Below Ground, shafts and raises): Power Equipment Operators: GROUP 1 $25.12 $10.81 GROUP 2 $25.47 $10.85 GROUP 3 $25.57 $10.86 GROUP 4 $25.82 $10.88 GROUP 5 $25.97 $10.90 GROUP 6 $26.12 $10.91 GROUP 7 $26.37 $10.94 GROUP 1 $22.97 $10.60 GROUP 2 $23.32 $10.63 GROUP 3 $23.67 $10.67 GROUP 4 $23.82 $10.68 GROUP 5 $23.97 $10.70 GROUP 6 $24.12 $10.71 GROUP 7 $24.88 $10.79 Ironworkers (Ornamental) $24.80 $10.03 Laborers (Removal of Asbestos) $21.03 $8.55 Plumbers $30.19 $13.55 Pipefitters $30.45 $12.85 Truck Drivers: GROUP 1 $18.42 $10.00 GROUP 2 $19.14 $10.07 GROUP 3 $19.48 $10.11 GROUP 4 $20.01 $10.16 GROUP 5 $20.66 $10.23 GROUP 6 $21.46 $10.31

11 POWER EQUIPMENT OPERATOR CLASSIFICATIONS (TUNNELS ABOVE AND BELOW GROUND, SHAFTS, AND RAISES): GROUP 1 - Brakeman GROUP 2 - Motorman GROUP 3 - Compressor GROUP 4 - Air Tractors; Grout Machine; Gunnite Machine; Jumbo Form GROUP 5 - Concrete Placement Pumps; Mucking Machines and Front End Loaders, Underground, Slusher; Mine Hoist Operator; Mechanic GROUP 6 - Mechanic Welder GROUP 7 - Mole NOTE: Any equipment listed below being used in tunnel work, below or above ground shall be paid not less than $2.00 per hour above the listed wage rates. POWER EQUIPMENT OPERATOR CLASSIFICATIONS: GROUP 1 - Air compressor, brakeman, drill operator -smaller than Watson 2500 and similar, operators of 5 or more light plants, welding machines, generators, single unit conveyor, pumps, vacuum well point system, tractor, under 70 hp with or without attachments compressors, 360 C.F.M. or less GROUP 2 - Conveyor, handling building materials, ditch witch and similar trenching machine, forklift, haulage motor man, pugmill, portable screening plant with or without a spray bar, screening plants, with classifier, self-propelled roller, rubber-tires under 5 tons. GROUP 3 - asphalt plant, backfiller; cableway signalman; C.M.I. and similar, concrete batching plants, concrete finish machine, concrete gang saw on concrete paving, concrete mixer, less than 1 yd., under 8 inches, distributors, bituminous surfaces dozer, drill, diamond or core, elevating graders, elevator operator, lubricating and service engineer, grout machine, gunnite machine, hoist, 1 drum, horizontal directional drill operator, hydraulic backhoes; road stabilization machine, sandblasting Machine, single unit portable crusher, with or without washer, Tie tamper, wheel mounted, trenching machine operator, winch on truck. GROUP 4 - Cable operated power shovels, draglines, clamshells, 5 cubic yards and under, concrete mixer over 1 Cubic yard, concrete pavers 34E or similar, grade Checker, hoist, 2 drums, mechanic, mixer mobile, Portable crusher, with or without washer; tractor with sideboom, roto-m ill and similar, welder. GROUP 5 - Cable operated power shovels, draglines, clamshells and Backhoes over 5 cubic yards, caisson drill Watson 2500 similar or larger, motor grader blade-finish, hoist 3 drum or more. GROUP 6 - Cableway, derrick, quad nine push unit, wheel excavator, belt or elevating loader. GROUP 7 - tower cranes all types. TRUCK DRIVER CLASSIFICATIONS: GROUP 1 - Greasemen, Servicemen and Ambulance Drivers, Battery Men, Shuttle Truck or Bus, Flat Rack Tandem Axle.

12 GROUP 2 - Fork Lift Driver, Straddle Truck Driver, Lumber Carrier, Liquid and Bulk Tankers Single Axle, Combination, Euclid Electric or Similar, Specialty and Hoisting, Truck Drivers Fuel Truck, Grease Truck, Combination Fuel and Grease. GROUP 3 - Truck Driver Snow Plow, Truck Driver Dump or Type Jumbo and similar type equipment. GROUP 4 - Cement Mixer Agitator Truck over 10 cubic yards to and including 15 cubic yards, Tire Man, Cab Operated Distributor Truck Driver. GROUP 5 - Heavy Duty Diesel Mechanic, Body Man, Welders or Combination Men. WELDERS - Receive rate prescribed for craft performing operation to which welding is incidental.

Office of Economic Development Division of Small Business Opportunity Compliance Unit DIA EMAIL: small.business@flydenver.

13 Office of Economic Development Division of Small Business Opportunity Compliance Unit DIA Pena Blvd, AOB, Suite 7810 LETTER OF INTENT (LOI) Denver, CO All lines must be completed or marked N/A for Not Applicable Phone: Submit the attached completed checklist with this letter. Fax: Project No.: Project Name: A. The Following Section Is To Be Completed by the Bidder/Consultant This Letter of Intent Must be Signed by the Bidder/Consultant and M/WBE, SBE or DBE Name of Bidder/Consultant: Phone: Contact Person: Fax: Address: City: State: Zip: B. The Following Section is To Be Completed by the M/WBE, SBE or DBE, at any Tier This Letter of Intent Must be Signed by the M/WBE, SBE or DBE and Bidder/Consultant Name of Certified Firm: Phone: Contact Person: Fax: Address: City: State: Zip: Please check the designation which applies to the certified firm. MBE/WBE ( ) SBE ( ) DBE ( ) Indirect Utilization: If this M/WBE, SBE or DBE is not a direct first tier subcontractor/subconsultant, supplier or broker to the Bidder/ Consultant, please indicate the name of the subcontractor/subconsultant, supplier or broker which is utilizing the participation of this firm: A Copy of the M/WBE, SBE or DBE Letter of Certification must be Attached Identify the scope of the work to be performed or supply item that will be provided by the M/WBE/SBE/DBE. On unit price bids only, identify which bid line items the M/WBE/SBE/DBEs scope of work or supply corresponds to. Subcontractor/Subconsultant ( ) Supplier ( ) Broker ( ) Bidder intends to utilize the aforementioned M/WBE, SBE or DBE for the Work/Supply described above. The cost of the work and percentage of the total subcontractor M/WBE, SBE or DBE bid amount is: $ % Consultant intends to utilize the aforementioned M/WBE, SBE or DBE for the Work/Supply described above. The percentage of the work of the total subconsultant M/WBE, SBE or DBE will perform is: % If the fee amount of the work to be performed is requested, the fee amount, is: $ Bidder/Consultant s Signature: Title: M/WBE, SBE or DBE Firm s Signature: Title: If the above named Bidder/Consultant is not determined to be the successful Bidder/Consultant, this Letter of Intent shall be null and void. COMP-FRM-012 Revised 8/2/2011 Date: Date:

14 Letter of Intent (LOI) Checklist All lines must be completed or marked N/A for Not Applicable Submit the attached completed checklist with this letter. Completed Project Number & Project Name Section A: Name of Bidder/Consultant, Contact Person, Address, City, State, Zip, Phone, Section B: Name of Certified Firm, Contact Person, Address, City, State, Zip, Phone, Designation checked for MBE/WBE, SBE or DBE Indirect Utilization: Name of subcontractor/subconsultant, supplier or broker is indicated if using the participation of a 2 nd tier subcontractor/subconsultant, supplier or broker. Scope of work performed or item supplied by M/WBE, SBE or DBE Line items performed, if line-item bid. Copy of M/WBE, SBE or DBE Letter of Certification Attached Designation checked for Subcontractor/Subconsultant, Supplier or Broker If project is a hard bid Bidder has indicated dollar amount for value of work going to Subcontractor/ Subconsultant, Supplier or Broker Bidder has indicated percentage for value of work going to Subcontractor/ Subconsultant, Supplier or Broker If project is an RFP/RFQ Consultant has indicated percentage for value of work going to Subcontractor/ Subconsultant, Supplier or Broker Name & contact name for MWBE. Fee amount if fee amount of work to be performed is requested. Bidder/Consultant s Signature, Title & Date M/WBE, SBE or DBE Firm s Signature, Title and Date The complete and accurate information that is required for the Letter of Intent is based on the following sections of the Ordinance: Section and Section Failure to complete this information on the Letter of Intent (LOI) may automatically deem a bid or proposal nonresponsive. COMP-FRM-012 Revised 8/2/2011

FAR SUBPART 22.9 NONDISCRIMINATION BECAUSE OF AGE (FEB 1964)

PART 3 - WAGE DETERMINATION 3.J MINIMUM WAGE SCHEDULE FAR SUBPART 22.9 NONDISCRIMINATION BECAUSE OF AGE (FEB 1964) 22.901 Policy. Executive Order 11141, February 12, 1964 (29 CFR 2477), states that the