Faure Herman Global Services. Calibration Services. Maximizing Product Performances
|
|
- Job Ball
- 6 years ago
- Views:
Transcription
1 Faure Herman Global Services Services Maximizing Product Performances
2 1 Introduction Thanks to unique worldwide testing facilities, Faure Herman is able to perform both calibration checks and re-calibration of flowmeters over a wide range of flowrates and viscosities. Faure Herman performs product calibration in compliance with International Standards such as OIML, API, ISO and NPD requirements as well as specific requirements from customers. Based on years of experience, Faure Herman highly recommends periodical product calibration to keep equipment under optimum operating conditions. The Faure Herman calibration facilities: guarantee optimum verification of meters performance, benefit from a high level of expertise and know-how in metrology, propose calibration over full customers application range, secure onsite flowmeter accuracy.
3 2 1. Faure Herman Major added value of Faure Herman calibration facilities The objective of the Faure Herman laboratory is to provide their customers a comparable and reliable : done with Hydrocarbon fluids at real operation conditions : viscosities, flowrates In addition to verification, capability to adjust flow meters in our workshop Traceability fully established to International Standards Independent Laboratory verified by COFRAC/ILAC () accreditation Worldwide recognized calibration results through the ILAC/MRA (Mutual Recognition Agreements) benches uncertainties meet the most stringent requirements State-of-the-art Flow laboratory Faure Herman has 11 calibration stations for testing liquid and gas flow meters, which calibrate a broad range: of flow rates from 10 l/h to 3,000 m3/h and of viscosities from 0.5 to 1000 cst, all in compliance with international standards as OIML, API, and ISO and with our customers specific requirements. The Faure Herman flow laboratory can ensure calibration over a dynamic Reynolds Number range of 30 to and viscosities to 1000 cst. The flowmeter calibration is performed by highly trained staff and the process is ISO9001 certified which ensures high quality management and controlling of the procedure. The flow Laboratory is COFRAC/ILAC certified.
4 3 and traceability The Faure Herman calibration station in La Ferté Bernard (France) has been accredited as a calibration laboratory for liquid flow by the French Accreditation Committee (COFRAC). Faure Herman can provide COFRAC calibration certificates in the accredited area of dynamic volume. These certificates are the only contractual documents to guarantee the uncertainty range. Working with an ISO/IEC flow focused metrology laboratory is a guarantee of Quality 2. Faure Herman Testing Facilities
5 4 3. Factory Mapping Proving vs. Meter Faure Herman is able to propose calibration of different types of technology as per the following calibration process mapping: Turbine UFM PD Coriolis /Ball prover Master meter /Ball prover Master meter Liquid Test facilities Turbine Flowmeter Viscosity range Noal Poids mesureur of proving HP ,6 to 350 mm²/s 30 m3/h 2850 m 3 /h 8" to 18" 0,6 to 6 mm²/s 950 m 3 /h 30 m 3 /h Loop 4" to 8" 150 mm²/s 700 m 3 /h 200 mm²/s 600 m 3 /h 0,6 to 6 mm²/s 190 m 3 /h #900 (other on Pulse/Frequen cy Ball/piston prover 0,5 m 3 /h 170 m 3 /h 1" to 4" 150 mm²/s 150 m 3 /h Ultrasonic Flowmeter Viscosity range Noal Poids mesureur of proving HP ,6 to 350 mm²/s 30 m3/h 2850 m 3 /h 6" to 18" 0,6 to 6 mm²/s 950 m 3 /h Loop 30 m 3 /h 150 mm²/s 700 m 3 /h 200 mm²/s 600 m 3 /h 4" to 8" #900 (other on Pulse/Frequen cy Master Meter 0,6 to 6 mm²/s 190 m 3 /h 0,5 m 3 /h 170 m 3 /h 1" to 4" 150 mm²/s 150 m 3 /h
6 5 Coriolis Flowmeter HP 3000 Viscosity range 0,6 to 350 mm²/s 30 m3/h 2850 m 3 /h Noal 6" to 12" meter weight of proving 0,6 to 6 mm²/s Loop 30 m 3 /h 600 m 3 /h 150 mm²/s 500 m 3 /h 200 mm²/s 400 m 3 /h 0,6 to 6 mm²/s 190 m 3 /h 4" to 6" #150 (others on Pulse/Frequency VOLUME (others on Master Meter 1 m 3 /h 170 m 3 /h 1" to 4" 150 mm²/s 150 m 3 /h PD Flowmeter HP 3000 Viscosity range Noal 0,6 to 350 mm²/s 30 m3/h 2850 m 3 /h 6" to 12" #150 (other on Master Meter Poids mesureur of proving 0,6 to 6 mm²/s 950 m 3 /h Loop 30 m 3 /h 150 mm²/s 700 m 3 /h 200 mm²/s 600 m 3 /h 0,6 to 6 mm²/s 190 m 3 /h 0,5 m 3 /h 170 m 3 /h 150 mm²/s 150 m 3 /h #300 4" to 6" (other on Pulse/Frequen OUI cy #900 1" to 4" (other on Ball/piston prover 4. Prices and Rates Please contact Faure Herman authorized representative for quotation.
heliflu tm The Dedicated Turbine Flowmeter for Custody Transfer Measurement Proven Performance Main Applications
heliflu tm tzn The Dedicated Turbine Flowmeter for Custody Transfer Measurement Proven Performance Main Applications Oil Production Allocation FSO, FPSO Metering Tanker Loading/Offloading Storage Management
More informationheliflu tm The Dedicated Turbine Flowmeter for Custody Transfer Measurement Proven Performance Main Applications
heliflu tm tzn The Dedicated Turbine Flowmeter for Custody Transfer Measurement Proven Performance Main Applications Oil Production Allocation FSO, FPSO Metering Tanker Loading/Offloading Storage Management
More informationHELIFLU TM TZN. The Dedicated Turbine Flowmeter for Custody Transfer Measurement. Proven Performance. Main Applications
HELIFLU TM The Dedicated Turbine Flowmeter for Custody Transfer Measurement Proven Performance Main Applications Oil Production Allocation FSO, FPSO Metering Tanker Loading/Offloading Storage Management
More informationLNG Flow Calibration
LNG Flow Calibration Oswin Kerkhof OKerkhof@vsl.nl Gertjan Kok, Peter Lucas, Mijndert van der Beek, Erik Smits, Andrea Peruzzi, Gerard Blom, Inge van Andel, Jan van Geel Anders Andersson, Krister Stolt
More informationCalibration services Meeting our customers needs in the U.S.
Products Solutions Services Calibration services Meeting our customers needs in the U.S. Calibration services 2 Calibration services Fulfilling the needs of all industries Does the instrumentation that
More informationLEASE AUTOMATIC CUSTODY TRANSFER UNITS (LACT UNITS)
LEASE AUTOMATIC CUSTODY TRANSFER UNITS (LACT UNITS) The Custody Transfer concept applies when the possession of crude oil or petroleum product is transferred from one legal entity to another. LACT units
More informationOIML D 14 DOCUMENT. Edition 2004 (E) ORGANISATION INTERNATIONALE INTERNATIONAL ORGANIZATION. Training and qualification of legal metrology personnel
INTERNATIONAL DOCUMENT OIML D 14 Edition 2004 (E) Training and qualification of legal metrology personnel Formation et qualification des personnels de métrologie légale OIML D 14 Edition 2004 (E) ORGANISATION
More informationOil & Gas Flow Solutions for Fiscal Measurement
Oil & Gas Flow Solutions for Fiscal Measurement Emerson Oil & Gas Flow Solutions for Fiscal Measurement Performance requirements have become more stringent with unrelenting pressure for improved reliability,
More informationFundamental Overview of an NGL Meter Station Design Tony Lockard Enterprise Products 1100 Louisiana Street, Houston, TX
Fundamental Overview of an NGL Meter Station Design Tony Lockard Enterprise Products 1100 Louisiana Street, Houston, TX 77002-5227 Overview In this paper I will attempt to give a fundamental overview of
More informationMeasurement uncertainty: Requirements set in the accreditation standards
Measurement uncertainty: Requirements set in the accreditation standards Kyriacos C. Tsimillis Pancyprian Union of Chemists Division of Quality Assurance Accreditation standards ISO/IEC 17025 (2005) General
More informationAmerican Association for Laboratory Accreditation
Page 1 of 14 The following pages present R205 Specific s: Calibration Laboratory Accreditation Program (dated September 2005) in checklist format. All laboratories seeking accreditation in the Calibration
More informationCUSTODY TRANSFER FLOW MEASUREMENT WITH NEW TECHNOLOGIES. Stephen A. Ifft McCrometer Inc. Hemet, California, USA
CUSTODY TRANSFER FLOW MEASUREMENT WITH NEW TECHNOLOGIES Stephen A. Ifft McCrometer Inc. Hemet, California, USA ABSTRACT New technologies can often bring advances to the operational processes within many
More informationOIML B 15 BASIC PUBLICATION. Edition 2006 (E) ORGANISATION INTERNATIONALE INTERNATIONAL ORGANIZATION
BASIC PUBLICATION OIML B 15 Edition 2006 (E) International Organization of Legal Metrology Strategic Plan Organisation Internationale de Métrologie Légale Plan Stratégique OIML B 15 Edition 2006 (E) ORGANISATION
More informationVSL Training course. From flow metering to the kilogram (Grand K) in Paris!
VSL Training course From flow metering to the kilogram (Grand K) in Paris! VSL Dutch Metrology Institute National Metrology Institute for The Netherlands Jos Verbeek Erik Smits Content - Introduction Jos,
More informationWe put you first. And keep you ahead. Oil and Gas Production Measurement
We put you first. And keep you ahead. Oil and Gas Production Measurement From Wellhead to Pipeline Peace of Mind We ve Got You Covered We know it s tough out there not enough manpower, harsh weather, harsh
More informationFlowmeters. Positive Displacement meter. Coriolis mass flowmeter. Turbine flowmeter. Ultrasonic flowmeter
The Satam range is used for the custody transfer measurement of liquid hydrocarbons, liquid gas and liquid chemicals. Consisting of four distinct families, the range is able to meet the needs of most industrial
More informationEmerson in the LNG market chain. Emerson Flow Portfolio & Solutions in the LNG supply chain. Skangas MID solution to comply with GIIGNL
Emerson in the LNG market chain Emerson Flow Portfolio & Solutions in the LNG supply chain Skangas MID solution to comply with GIIGNL Energy measurement: Emerson s response to full compliance of the Int
More informationDevelopment of a metrology system difference between legal metrology and industrial metrology
COOPERATION IN METROLOGY: Development of a metrology system difference between legal metrology and industrial metrology Manfred Kochsiek Metrology Consultant 1 My professional background Mechanical engineer,
More informationKRAL Volumeter - OMG Series Universal Flowmeters
KRAL Volumeter - OMG Series Universal Flowmeters OMG - Universal OMG Flowmeters for a Wide Range of Applications Operating Conditions and Materials Flow Range: 0.03 to 2000 gpm Max. Pressure: 3600 psi
More informationLNG Quality and Quantity Measurement
LNG Quality and Quantity Measurement Dr. Thomas Wu National Metrology Centre Email: thomas_wu@nmc.a-star.edu.sg LNG Measurements Roundtable, WMD 2017 Conference, Singapore 19 May 2017 Copyright 2017 All
More informationA016 Traceability of measurement results compared to national and international measurement standards
08.04.2016 Version 08 Page 1 de 9 A016 Traceability of measurement results compared to national and international measurement standards Modifications: p 2 South Lane Tower I 1, avenue du Swing L-4367 Belvaux
More informationLIQUID CONTROLS. Terminal and Bulk Plant Metering Applications. Application Brochure:
LIQUID CONTROLS Terminal and Bulk Plant Metering Applications Application Brochure: 200-40 www.lcmeter.com Premier products, premier performance Liquid Controls Group offers a broad selection of positive
More informationMeter Systems in Measurement and Control Engineering
Higher National Unit Specification General information for centres Unit title: Meter Systems in Measurement and Control Engineering Unit code: DX4H 34 Unit purpose: This Unit is designed to enable candidates
More informationManual of Petroleum Measurement Standards Chapter 21 Electronic Flow Measurement (EFM)
Manual of Petroleum Measurement Standards Chapter 21 Electronic Flow Measurement (EFM) Mark Godfrey Engineering Services Manager OMNI Flow Computers inc 1 Introduction MPMS Chapter 21 1. Chapter 21.1 Electronic
More informationCALIBRATION OF TURBINE GAS METER BY MATCHING REYNOLDS NUMBER AND DENSITY. Introduction
CALIBRATION OF TURBINE GAS METER BY MATCHING REYNOLDS NUMBER AND DENSITY PAUL W. TANG, M.Sc.,P.Eng. TERASEN GAS SURREY, BC, CANADA Introduction Accurate metering is essential to fair trading in the natural
More informationPETROL INSTRUMENTS S.r.l. - ITALY P D F L O W M E T E R S PERFORMANCE TEST PROCEDURE MODELS 51-11
Sheet n. 1 DOC. CF-01/E rev. 5 PETROL INSTRUMENTS S.r.l. - ITALY P D F L O W M E T E R S PERFORMANCE TEST PROCEDURE MODELS 51-11 A. GENERALITY 1. PETROL flowmeters have been legally approved with D.M.
More informationINTERNATIONAL TRAINING PROGRAMMES
INTERNATIONAL TRAINING PROGRAMMES 2017-18 SPONSORED BY Ministry of External Affairs, Govt. of India Under Indian Technical and Economic Cooperation Programme (ITEC) / Special Commonwealth Africa Assistance
More informationIntroduction of MECADA Joint Industry Project
OIL & GAS Introduction of MECADA Joint Industry Project Metering & Calibration Data Analytics Lennart van Luijk, Henk Riezebos, Ronald ten Cate 18 November 2017 1 DNV GL 2015 18 November 2017 SAFER, SMARTER,
More informationGLP/SC/01 Basic statistical tools for analytical chemistry (2 days)
GLP Consulting http://consultglp.com Courses on offer (See outlines below) GLP/SC/01 Basic statistical tools for analytical chemistry (2 days) GLP/SC/02 The GUM bottom-up evaluation technique of measurement
More informationOPERATIONAL EXPERIENCE WITH SMALL VOLUME PROVERS. Class #4110.1
OPERATIONAL EXPERIENCE WITH SMALL VOLUME PROVERS Class #4110.1 Steve Whitman Coastal Flow Liquid Measurement, Inc. 2222 Bay Area Blvd., Suite 200 Houston, Texas 77058 Introduction Introduced decades ago,
More informationLong-term Evaluation of Ultrasonic Flowmeters
Long-term Evaluation of Ultrasonic Flowmeters A Report for National Measurement System Policy Unit DTI, London Project No: OR7 (OSDC57) Report No: 351/99 Date: 20 September 1999 Flow Centre Long-term Evaluation
More informationWhat s Up With AASHTO and AMRL?
What s Not New What s Up With AASHTO and AMRL? Time between on-site assessments ISO/IEC 17025 Robert A. Lutz AASHTO Materials Reference Laboratory (AMRL) Time Between On-Site Assessments Will the interval
More informationServices for Process Instrumentation
Siemens AG 2017 /2 /2 /4 Field /5 /6 /8 / /10 /11 /12 /13 /14 /16 Service Contracts Siemens FI 01 2017 US Edition Introduction to Siemens Industry As an industry partner, we offer you an unrivaled range
More informationWorldwide Flowmeter Calibration Facilities and Markets
1. 27 Water Street Wakefield, MA 01880 USA +1 781-245-3200 +1 781-224-7552 (fax) www.flowresearch.com Worldwide Flowmeter Calibration Facilities and Markets Two new studies designed for flow calibration
More informationSYNENERGY. Unifying hydrocarbon management in a single system. Oil & Gas flow metering and calibration supervisory. Analyser management
SYNENERGY Unifying hydrocarbon management in a single system Oil & Gas flow metering and calibration supervisory Analyser management Pipeline Leak Detection and Localisation SynEnergy Hydrocarbon Management
More informationFactors in Gas Meter Station Design & Operations Short Course
Factors in Gas Meter Station Design & Operations Short Course Sponsored by SGA Transmission Technical Training Committee & Southwest Research Institute (SwRI) in cooperation with The Gas Machinery Research
More informationSECTION Coriolis Mass Flow Meters
SECTION 40 71 73 Coriolis Mass Flow Meters PART 1- GENERAL 1.01 SUMMARY A. Coriolis flow meter for permanent installation above ground. The meter shall utilize a measuring principle based on the controlled
More informationPetroleum Measurement
If you have questions or comments regarding API standards, please visit www.api.org/standards. MANUAL OF PETROLEUM MEASUREMENT STANDARDS API currently maintains a comprehensive Manual of Petroleum Measurement
More informationTraceability. There are two types of traceability: direct and indirect.
People Plus Precision Rice Lake Weighing Systems mass calibration laboratory has been awarded the NIST/NVLAP recognition of excellence. We are proud of our lab and our metrology staff. They continue to
More informationFlow Test Data Book and Flow Handbook for 405 Compact Orifice Series and 1595 Conditioning Orifice Plate
Test Book and Handbook for 405 Compact Orifice Series and 1595 Conditioning Orifice Plate Title Page 405 Compact Orifice Series and 1595 Conditioning Orifice Plate Test Book NOTICE Read this manual before
More informationUpstream Production Measurement Solutions
Upstream Production Measurement Solutions Superior flow and density measurement Best-in-class measurement It s challenging to keep a balance between operations, maintenance and compliance, while delivering
More informationThe Continuing Coriolis Evolution
The Continuing Coriolis Evolution I t s no surprise that gas applications are a definite growth zone for Coriolis flowmeters. While they have been around since the 1980s, their use has primarily been with
More informationWell Pad Automation Improves Capital Efficiency and Reduces Fiscal Risk Michael Machuca* Emerson Process Management
URTeC: 1874921 Well Pad Automation Improves Capital Efficiency and Reduces Fiscal Risk Michael Machuca* Emerson Process Management Copyright 2014, Unconventional Resources Technology Conference (URTeC)
More informationHydrocarbon management HM 20. Proving of aviation fuelling positive displacement meters. 2nd edition
Hydrocarbon management HM 20 Proving of aviation fuelling positive displacement meters 2nd edition HM 20 PROVING OF AVIATION FUELLING POSITIVE DISPLACEMENT METERS 2nd edition October 2013 Published by
More information(L)NG composition measurements
(L)NG composition measurements Adriaan van der Veen Jianrong Li Gerard Nieuwenkamp VSL R&D chemistry LNG II training course London, 15 June 2016 (Liquefied) Natural gas measurement VSL - Beyond all doubt
More informationThe global development and future of natural gas measurement
The global development and future of natural gas measurement Jacob Freeke, Director Marketing Daniel Ultrasonic 13 May, 2015 Grand opening of the world s largest closed loop for high-pressure calibration
More informationMVS. Traceability Document MULTICHANNEL VERIFICATION SYSTEM
MVS MULTICHANNEL VERIFICATION SYSTEM Traceability Document 25 Bradley Drive Westbrook, Maine USA 04092-2013 tel: 207-854-0860, toll free: 1-888-406-3463 fax: 207-854-0867 email: orders@artel-usa.com email:
More informationPRESENTATION OVERVIEW
Conformance and Interoperability (C&I) Validation Workshop for EAC Region Laico Regency Hotel, Nairobi, Kenya 21st 23rd October 2015 PART 2 Requirements for Accreditation Bodies and Testing Laboratories
More informationMetrology Systems & Services Ltd.
Metrology Systems & Services Ltd. Coolagown, Fermoy, Co Cork Calibration Laboratory Registration number: 161C is accredited by the Irish National Board (INAB) to undertake calibration as detailed in the
More informationRefueling and filling made easy
Refueling and filling made easy Precise flow measurement technology for: Compressed natural gas (CNG) Liquefied natural gas (LNG) Liquefied petroleum gas (LPG) AdBlue Endress+Hauser Your Partner Endress+Hauser
More informationAmerican Association for Laboratory Accreditation
ISO 15189 Page 1 of 17 Accredited clinical laboratories are required to meet the following additional requirements as contained in P905 - A2LA Metrological Traceability Policy for ISO 15189 Laboratory
More informationILAC-P10:2002. ILAC Policy on Traceability of Measurement Results
ILAC-P10:2002 ILAC Policy on Traceability of Measurement Results Copyright ILAC 2002 ILAC encourages the authorised reproduction of its publications, or parts thereof, by organisations wishing to use such
More informationWorld s first LNG research and calibration facility
World s first LNG research and calibration facility P. Lucas 1, O. Büker 2, A. Kenbar 3, H. Kolbjørnsen 4, K. Rasmussen 5, G. Rathwell 6, M. Safonova 7, K. Stolt 2, M. P. van der Beek 1 1 VSL Dutch Metrology
More informationTechnical Specifications and General Guidelines for Mass Flow Meters at Petroleum Oil Installations. Note:
Technical Specifications and General Guidelines for Mass Flow Meters at Petroleum Oil Installations Note: These are general specifications and guidelines for Mass Flow Meters for Petroleum Oil Installations.
More informationIntercomparison of Multiphase Flow Facilities: Comparison of NEL and Humble, USA (Texaco)
Intercomparison of Multiphase Flow Facilities: Comparison of NEL and Humble, USA (Texaco) A Report for National Measurement System Policy Unit DTI, London Report No: 144/99 Date: 10 March 1999 Multiphase
More informationthe european reference label for the health products cold chain
the european reference label for the health products cold chain The guarantee of compliance Good Distribution Practices for your refrigeration equipment What is Pharma are the advantages of this label
More informationINTERNATIONAL STANDARD
INTERNATIONAL STANDARD ISO 17089-2 First edition 2012-10-01 Measurement of fluid flow in closed conduits Ultrasonic meters for gas Part 2: Meters for industrial applications Mesurage de débit des fluides
More informationNATA Policy on Calibration and Measurement Traceability
NATA Policy on Calibration and Measurement Traceability Paul McMullen Sector Manager, Calibration This Session 1. VIM Definitions Calibration and Metrological Traceability 2. Previous Policy on Metrological
More informationIndustrial Weights. Solid and Innovative Design To Meet Tough Requirements
Industrial Weights s 1 kg 2 t s 20 lb 1000 lb OIML classes F1, F2, M1, M2, M3 NIST Class F Stainless Steel Cast Iron Solid and Innovative Design To Meet Tough Requirements Grip Handle Weights Unrivaled
More informationAddy Baksteen June 20, 2016 HONEYWELL'S VISION ON THE FUTURE OF MEASUREMENT
Addy Baksteen June 20, 2016 HONEYWELL'S VISION ON THE FUTURE OF MEASUREMENT Topic for Today 1 Short Introduction to Elster Precision Solutions Industry Trends History of Diagnostics From Diagnostics to
More informationReduce costs, improve well testing, and maximize production
Reduce costs, improve well testing, and maximize production Integrated Well Testing Skid Solution Proven automation solutions and local expertise to help you overcome your toughest challenges. Informed
More informationExamples of reference materials
Examples of reference materials JCTLM Working Group for Traceability: Education and Promotion (WG-TEP) Area 2: Mini-presentations to explain scientific concepts What are reference materials? Reference
More informationThe Paradigm Case Method of Flowmeter Selection
1 By Jesse Yoder, Overview One of the most interesting developments in the flowmeter market today is the battle between the newer flow technologies and the traditional flowmeters. New-technology flowmeters
More informationWM2015 Conference, March 15 19, 2015, Phoenix, Arizona, USA
Why Accredit ISO/CEI 17025 a Nuclear Waste Management Laboratory? 15112 Jean Chevillon *, Raphaël Oddou * * CEA, DAM, DIF, Bruyeres-Le-Chatel, F-91297 Arpajon, France ABSTRACT When there is no storage,
More informationCertified according to DIN EN ISO 9001:2008 Accredited according to DIN EN ISO/IEC 17025:2005
Viscosity Length equipment Electricity Pressure ph Volume Gauge blocks Mass Electrolyt. conductivity ZMK ANALYTIK- GmbH Density Humidity ZMK GmbH Temperature Time / frequency Torque Balances Certified
More informationOil & Gas Production Measurement Solutions. Superior flow and density measurement
Oil & Gas Production Measurement Solutions Superior flow and density measurement Best-in-Class Flow & Density Measurement for Upstream Production only from Emerson Process Management Emerson s flow, density
More informationAmerican Association for Laboratory Accreditation
Page 1 of 28 R205: SPECIFIC REQUIREMENTS: CALIBRATION LABORATORY ACCREDITATION PROGRAM November 2012 2012 by A2LA All rights reserved. No part of this document may be reproduced in any form or by any means
More informationMetrology in Industry. The Key for Quality
Brochure More information from http://www.researchandmarkets.com/reports/2179387/ Metrology in Industry. The Key for Quality Description: Metrology is an integral part of the structure of today s world:
More informationILAC P10 TRACEABILITY
ACTIVITY 1.3 TRAINING SESSION FOLLOWING THE FINDINGS FROM PREVIOUS ACTIVITIES: ILAC P10 TRACEABILITY Maria Pia Toni Slide 1 of XX REFERENCE ILAC P10:2013 ILAC Policy on the Traceability of Measurement
More informationWELMEC European cooperation in legal metrology
WELMEC 8.6 Issue 1 WELMEC European cooperation in legal metrology Measuring Instruments Directive 2004/22/EC Presumption of Conformity of the Quality System of Manufacturers with Module D or H 1 when EN
More informationFiscal Measurement and Remote Automation. Oil & Gas SCADA Services and Solutions
Fiscal Measurement and Remote Automation Oil & Gas SCADA Services and Solutions Innovative Solutions for a World in Action As an division and the leading supplier of flow computers, RTUs, and presets,
More informationThe role of accreditation bodies and EQA organisers in the. specifications
The role of accreditation bodies and EQA organisers in the assessment of analytical quality specifications Ian Mann Swiss Accreditation Service ian.mann@sas.ch Content Important partners and aspects of
More informationPreparation Approval Authorisation Application date. Directive Council The President
Title Proficiency Testing Reference RT-24 Revision 02 Date 2015-10-27 NOTE: The present document represent the English version of document under reference at the specified revision. In case of conflict
More informationPermanent Pressure Loss Comparison Among Various Flowmeter Technologies
Permanent Pressure Loss Comparison Among Various Flowmeter Technologies by Stephen A. Ifft McCrometer Hemet, California, USA Abstract This paper explores the issue of permanent pressure loss through various
More informationISO/IEC INTERNATIONAL STANDARD. Conformity assessment General requirements for accreditation bodies accrediting conformity assessment bodies
INTERNATIONAL STANDARD ISO/IEC 17011 First edition 2004-09-01 Conformity assessment General requirements for accreditation bodies accrediting conformity assessment bodies Évaluation de la conformité Exigences
More informationKick-off meeting EMRP ENV05 Berlin, 09/20/2011 to 09/21/2011. Florence Salvetat Head of metrology laboratory
Kick-off meeting EMRP ENV05 Berlin, 09/20/2011 to 09/21/2011 Florence Salvetat florence.salvetat@ifremer.fr Head of metrology laboratory The metrology laboratory: Dedicated to physical and physico-chemical
More informationFlow Meter Calibration
fluid mechanics H4 A compact unit that compares and shows the accuracy, losses and use of fundamental flow meters Key Features Unique quick-change flow meter adaptors and pressure connections Four tube
More informationDe-Mystifying Calibration Accreditation 15 Jan 2013
De-Mystifying Calibration Accreditation 15 Jan 2013 Ryan Fischer Laboratory Accreditation Bureau Chair, NCSLI 183 Accreditation Resources Committee Bob Stern Agilent Technologies, Inc. Co-chair, NCSLI
More informationFLOW-X HUMAN MACHINE INTERFACE
FLOW-X HUMAN MACHINE INTERFACE Enhanced diagnostics & troubleshooting of flow measurements Measurement Data: from Well to Awareness STANDARD AND CUSTOMIZED SOLUTIONS Flow-Xplore is an out-of-the-box Human
More informationEuropean MID Directive for Custody Transfer Measuring Instruments Proven, certified technology for Fiscal & Custody transfer applications
European MID Directive for Custody Transfer Measuring Instruments Proven, certified technology for Fiscal & Custody transfer applications European Metrology Directive Legal metrology in Europe has undergone
More informationPower & Energy. Combined Cycle Gas Turbine plants Comprehensive solutions for improved safety and efficiency
Products Solutions Power & Energy Combined Cycle Gas Turbine plants Comprehensive solutions for improved safety and efficiency Services 2 Combined Cycle Gas Turbine plants Power up your plant Power plants
More informationMeeting the ISO/IEC Requirements for Traceability and Measurement Uncertainty. APLAC Approaches. Dr Bernard King NARL, Australia
Meeting the ISO/IEC 17025 Requirements for Traceability and Measurement Uncertainty APLAC Approaches Dr Bernard King NARL, Australia Interpretation of ISO/IEC 17025 Requirements Extensive consultation
More informationSetting The Standard
www.iacpe.com Setting The Standard Page : 1 of 91 Rev. 01- IACPE No 19, Jalan Bilal Mahmood 80100 Johor Bahru Malaysia MATERIAL SELECTION CPE LEVEL II The International of is providing the introduction
More informationISO/IEC INTERNATIONAL STANDARD. Conformity assessment General requirements for proficiency testing
INTERNATIONAL STANDARD ISO/IEC 17043 First edition 2010-02-01 Conformity assessment General requirements for proficiency testing Évaluation de la conformité Exigences générales concernant les essais d'aptitude
More informationCRITERIA FOR PERFORMING CALIBRATION AND INTERMEDIATE CHECKS ON EQUIPMENT USED IN ACCREDITED FACILITIES
CRITERIA FOR PERFORMING CALIBRATION AND INTERMEDIATE CHECKS ON EQUIPMENT USED IN ACCREDITED FACILITIES Prepared by: Technical Manager Approved by: Chief Executive Officer Approval Date: 2017-08-10 Effective
More informationProline Prosonic Flow B 200 For reliable biogas flow measurement without compromise
HAASE Energietechnik AG, Neumünster Proline Prosonic Flow B 200 For reliable biogas flow measurement without compromise Process monitoring and energy balancing made easy Innovative measurement industry-optimized
More informationThe knowledge of measurement. Overview Solutions Metering Measurement technology
The knowledge of measurement Overview Solutions Metering Measurement technology Contents 3 Achieve more with KROHNE 4-5 Superior solutions for many application 6-11 Custody Transfer 12-17 KROHNE Liquid
More informationSponsler Precision Turbine Flowmeters
When Accuracy Counts Sponsler Precision Turbine Flowmeters Liquid and Gas Measurement Batching Blending Filling Process Control Sponsler Precision Turbine Flowmeters Sponsler precision turbine flowmeters
More informationMeasurement Uncertainty, Custody Transfer and Loss Control for Oil & Gas Industry
Reserve early to avoid disappointment! Measurement Uncertainty, Custody Transfer and Loss Control for Oil & Gas Industry 24 28th October 2011 Crown Plaza Mutiara Hotel, Kuala Lumpur, Malaysia INCREASE
More informationBy Dr. Jesse Yoder. The positive displacement and turbine
By Dr. Jesse Yoder When evaluating a flow technology, it is natural to consider growth rate as an important criterion. Why invest in products with a declining market base? It seems more logical to invest
More informationProduct Inspection. Compliance Expertise Performance Uptime. Product Inspection Services Maximizing Productivity
Product Inspection Compliance Expertise Performance Uptime Product Inspection Services Maximizing Productivity Product Inspection Service Consulting and Business Support Aligning Our Expertise with Your
More informationMeasuring Instruments Directive 2014/32/EU Assessment of Notified Bodies in Charge of Type Examination Presumption of Conformity based on EN 17065
WELMEC 8.5, 2017 Measuring Instruments Directive 2014/32/EU Assessment of Notified Bodies in Charge of Type Examination Presumption of Conformity based on EN 17065 For information: This guide is available
More informationRules for accreditation of providers of proficiency testing/interlaboratory
Rules for accreditation of providers of proficiency testing/interlaboratory tests Scope: With this regulation the requirements for accreditations of providers of proficiency testing/interlaboratory tests/ring
More informationPROJECT DESIGN DOCUMENT FORM (CDM PDD)
CDM Executive Board Document Typology Revision of Monitoring Plan version 0.5 dd 15 October 2009 UNFCCC Project Reference CDM Registration 1144 Project Title Tambun LPG Associated Gas Recovery and Utilization
More informationRecognized Experts. Competence Area
1(4) Recognized Experts Competence Area This memo concerns the content of detailed instructions for the evaluation and approval of recognized experts in accordance with section 48, subsection 2 of the
More informationVWR International Ltd
Orion Business Campus, Northwest Business Park, Ballycoolin, Blanchardstown, Dublin 15 Calibration Laboratory Registration number: 018C is accredited by the Irish National Board (INAB) to undertake calibration
More informationGlobal Calibration Gases LLC
Global Calibration Gases LLC 1090 Commerce Blvd N Sarasota, FL 34243 www.globalcalibrationgases.com ISO 17025:2005 Accredited For Calibration and Testing PGVP: N22016 GLOBAL CALIBRATION GASES IS A WORLD
More informationGain control of your fuel consumption
Gain control of your fuel consumption EcoMATE Product overview Systems for monitoring of fuel consumption and bunkering KROHNE Marine Welcome to KROHNE Marine. Through more than 50 years in marine business,
More informationFQS Accreditation for forensic testing agencies NEMC ANSI-ASQ National Accreditation Board
FQS Accreditation for forensic testing agencies ISO Guide d 34 for f Environmentall Labs b NEMC 2012 ANSI-ASQ National Accreditation Board ISO/IEC 17025 Calibration and Testing Labs ISO/IEC 17020 Inspection
More informationWeights Competence. Our Expertise Your Cornerstone for Reliable Results
Weights Competence Our Expertise Your Cornerstone for Reliable Results Manufacturing Process Our Unique Know-how Ensures the Highest Accuracy For our weights, we source only the finest quality austenitic
More information