Health Safety Wellbeing and Environment Minimum Standards Revision 5. Issued June 2018 Page 1 of 28
|
|
|
- Constance Austin
- 5 years ago
- Views:
Transcription
1 Page 1 of 28
2 1.0 Introduction 2.0 Definitions 3.0 Skills, Knowledge and Experience 3.1 CSCS card or affiliated scheme Exceptions 3.2 Skanska employees skills, knowledge and experience Trade Contractor Directors Trade Contractor Managers Trade Contractor Supervision Trade Contractor Operatives 4.0 Language 5.0 Induction 6.0 Supervision 7.0 Culture Injury Free Environment 8.0 Health and Wellbeing 8.1 Health Risk Assessment 8.2 Health Surveillance 8.3 Safety Critical worker assessment 8.4 On tool extraction 8.5 Face fit testing 8.6 Drug and Alcohol testing 8.7 Working Time 9.0 Controls 9.1 Risk Assessment and Safe Systems of Work 9.2 Pre Task Briefing 9.3 Emergency arrangements Fire Prevention First Aid Provision Rescue Plans 9.4 Permits to work 9.5 Inspections and audits 9.6 Work at Height Scaffolding Ladders Mobile Scaffold towers Lift shaft & riser protection Open Edges and Openings Falling materials and tool tethering Mobile Elevated working platforms 9.7 Demolition 9.8 Temporary Works 9.9 Lifting operations Competence General requirements Lifting with excavators 10.0 Excavations and Buried Services 11.0 Plant and Equipment 12.0 Protecting vulnerable road users requirements 13.0 Electrical safety 14.0 Noise, dust and vibration Page 2 of 28
3 15.0 Pollution prevention 16.0 Waste 17.0 Energy 18.0 Water 19.0 Personal Protective equipment 19.1 Works on the public highway 19.2 Track side specific requirements 19.3 Additional requirements 20.0 Asbestos 21.0 Work areas 22.0 Out of hour s works 23.0 Public interface 24.0 Materials 25.0 Supply Chain 25.1 Selection of Supply Chain Sub sub-contracting 25.3 Health and Safety and Environment advice 25.4 additional requirements 26.0 Communications 27.0 Incident reporting and investigation 28.0 HSE, EA and Enforcement Agency visits 29.0 Provision of Information 30.0 Site rules Page 3 of 28
4 1. Skanska H&S Policy and Skanska Environment Policy 2. Role Categorisation and Safety Critical workers guidance 3. Drugs and Alcohol Policy 4. MEWP policy and guidance 5. Vulnerable road users policy and guidance 6. Skanska dust standard 7. Quick Hitch cameras 9. Wheeled plant and underslung loads 10. People and plant interface standards 11. Safety Helmet colours 12. Site Rules Skanska H&S Policy and Skanska Environment Policy Role Categorisation and Safety Critical workers guidance Drugs and Alcohol Policy MEWP policy and guidance Vulnerable road users policy and guidance Skanska dust standard Quick Hitch 360 cameras Wheeled plant and underslung loads People / plant interface standards Safety Helmet colours Site Rules Page 4 of 28
5 . Trade Contractors must be able to demonstrate that they have appropriate H&S and Environment management systems in place, monitoring and control processes to comply with these and the additional requirements set out in these standards. Page 5 of 28
6 Page 6 of 28
7 Page 7 of 28
8 Page 8 of 28
9 A copy of the SEQOHS (Safe, effective, quality occupational health service) accreditation certificate should be held on record by the project as evidence of a suitable OH provider providing occupational health expertise and support to the Supply Chain/contractor. Page 9 of 28
10 Page 10 of 28
11 Page 11 of 28
12 o o o Page 12 of 28
13 Page 13 of 28
14 Page 14 of 28
15 Page 15 of 28
16 Page 16 of 28
17 Page 17 of 28
18 Page 18 of 28
19 o o o o o Page 19 of 28
20 o o o Page 20 of 28
21 Page 21 of 28
22 Page 22 of 28
23 Page 23 of 28
24 Page 24 of 28
25 Page 25 of 28
26 Page 26 of 28
27 Page 27 of 28
28 Page 28 of 28
Subcontractor Minimum Standards Benchmarking Record
2.0 3.1 3.2.1 3.2.2 3.2.3 3.2.4 Supply Chain Selection. Provision of PQQ/UVDB B2 Audit report Sub-sub-contracting. Provision of approved sub-contractors vendors list HSE Advice. Provision of competent
Training Standard Draft Only
Title Duration Purpose/ Scope Occupational Relevance Health and Safety in Construction (Site Manager) Minimum 5 days of 6 learning hours per day Purpose: The purpose of training delivered against this
WORKING PROCEDURE SITE HEALTH AND SAFETY MINIMUM STANDARDS FOR HYDRO CONSTRUCTION PROJECTS. RIUK\WP\PROJ.022_H th January 2016.
WORKING PROCEDURE SITE HEALTH AND SAFETY MINIMUM STANDARDS FOR HYDRO CONSTRUCTION PROJECTS 26 th January 2016 Issue no: 2 [RIUK\LMI.010 Management of Operations & Maintenance] Reviewed by: Approved by:
Health, Safety, Wellbeing and Environmental Minimum Standards. Date: 3 rd January 2017 Prepared by: Steve Arkell
Health, Safety, Wellbeing and Environmental Minimum Standards Date: 3 rd January 2017 Prepared by: Steve Arkell Contents 1 Definitions... 5 2 Skills, knowledge and experience... 5 2.1 EUSR, CSCS Card or
HSE Update February 2014
Health and Safety Executive HSE Update February 2014 Graeme McMinn Inspection Initiative Runs from 10/02/14 to 07/03/14 Across Scotland Targeting New Build Housing Energy Efficiency Work Matters of Evident
Health & Safety Arrangements for Companies Who Employ Less than 5 Employees
Health & Safety Arrangements for Companies Who Employ Less than 5 Employees Guidance Note 41 Jul 16 1 han 5 Employees Introduction If you are a company with under 5 employees and do not have a suitable
Health Safety, & Environment
GROUP SAFETY HEALTH AND ENVIRONMENT MANUAL R.G. Carter Construction Ltd Integrated Management System Section 7 Health Safety, & Environment Issue Manual No. Holders Name: Issue Date: GROUP HEALTH AND SAFETY
HEALTH & SAFETY ASSESSMENT SCHEME CONTRACTOR & PRINCIPAL CONTRACTOR APPRAISAL QUESTIONNAIRE
HEALTH & SAFETY ASSESSMENT SCHEME CONTRACTOR & PRINCIPAL CONTRACTOR APPRAISAL QUESTIONNAIRE The purpose of the health and safety questionnaire is to provide Clients with assurances that all companies on
Contractor Guidance. Five or more employees. Health and Safety
Contractor Five or more employees 1 CONTENTS INTRODUCTION 4 Further reading / additional resources 4 QUESTION 1: POLICY AND ORGANISATION 5 5 5 QUESTION 2: ARRANGEMENTS/PROCEDURES FOR HEALTH AND SAFETY
Health and Safety Policy
Health and Safety Policy T. C. Garrett Ltd. Roofing and Scaffolding Contractor 1 January 2017 SECTION 1: HEALTH AND SAFETY POLICY STATEMENT It is the policy of T C Garrett Ltd. to provide so far as is
Training Standards COMPETENCE AND TRAINING STANDARDS
COMPETENCE AND TRAINING STANDARDS This document applies to all employees except those retained for Asbestos Removal, the arrangement for these employees is contained in IMS doc 701, OP7. 1 Drugs and Alcohol
Design and Build Guidance
Design and Build Five or more employees 1 CONTENTS INTRODUCTION 4 Further reading / additional resources 4 QUESTION 1: POLICY AND ORGANISATION 5 5 5 QUESTION 2: ARRANGEMENTS/PROCEDURES FOR HEALTH AND SAFETY
(3) Major Service: Service(s) provided by a contractor that cost more than $250K per year and are considered high risk.
Health and Safety - Contractor Management Procedure - Outsourcing Major Services Section 1 - Summary (1) This Procedure details the process for engaging contractors that provide major services to Victoria
Contractor Guidance. Less than five employees. Health and Safety
Contractor Less than five employees 1 CONTENTS INTRODUCTION 4 Further reading / additional resources 4 QUESTION 1: POLICY AND ORGANISATION 6 6 6 QUESTION 2: ARRANGEMENTS/PROCEDURES FOR HEALTH AND SAFETY
Construction, Demolition & Excavation Works Doc Reference: DoMN-WHSMS 3.14 Version Number: 2.2
Purpose This procedure provides guidance to the Diocese of Maitland Newcastle (DoMN), principal contractors and other persons conducting a business or undertaking (PCBU) who commission or carry out construction,
CHAS Assessment Standards
CHAS Assessment Standards Section 1 - All Prosecutions or Enforcement Notices The Supplier has provided details of any enforcement notices or prosecutions served on them in the last three years by the
MEMBERSHIP & BIENNIAL HEALTH, SAFETY, ENVIRONMENTAL & QUALITY AUDIT
MEMBERSHIP & BIENNIAL HEALTH, SAFETY, ENVIRONMENTAL & QUALITY AUDIT 1 BIENNIAL HEALTH, SAFETY, ENVIRONMENTAL & QUALITY AUDIT Introduction Prior to any company wishing to join FASET, the trade association
Mini Tender PART B External Wall Insulation, Mechanical and Electrical Installation
Mini Tender PART B External Wall Insulation, Mechanical and Electrical Installation Mini Tender Questionnaire for Subcontractors Section B involves a questionnaire oriented around the provision of key
Industrial Training Services Ltd
Industrial Training Services Ltd Streetworks Training Testing Industrial Training Services Ltd was established in 1989. We deliver a complete and versatile training solution for a wide range of industries.
1. PURPOSE 2. SCOPE 3. APPLICATIONS AND INTERPRETATION. This document is to be read and understood in conjunction with the following, inter alia:
HEALTH & SAFETY SPECIFICATIONS FOR RENOVATION OF EXISTING BUILDINGS AND CONSTRUCTION OF NEW INFRASTRUCTURE IN THE NZG (PRETORIA AND MOKOPANE) AND THOHOYANDOU BOTANICAL GARDEN 1. PURPOSE The objective of
SAFE WORK METHOD STATEMENT
COMPANY DETAILS: Company Name Address CLIENT DETAILS: Principal contractor Contact name Phone no. Mobile: Phone no. Mobile: Works manager Contact no.: Project/owner name Work activity Scope of work covered
BHC-P-03.1 Training, Competence and Induction
BHC-P-03.1 Training, Competence and Induction Contents 1.0 Purpose 2.0 Scope 3.0 Definitions 4.0 Main requirements 5.0 Guidance documents and references 6.0 Appendices Revision register Date Version Description
CONSTRUCTION STAGE HEALTH AND SAFETY PLAN
CONSTRUCTION STAGE HEALTH AND SAFETY PLAN PROJECT NAME: SAMPLE DOCUMENT COMPANY NAME: SAMPLE DOCUMENT NAME: SAMPLE DOCUMENT DATE: 10th July 2018 1 CONTENTS INTRODUCTION 5 How to Use the plan 5 Responsible
HSE Priorities for Construction Designers April 2007
HSE CONSTRUCTION DIVISION PRIORITY RISKS 2004 ONWARDS Safety Priorities Work at height Reducing falls from height through: elimination by design; appropriate selection and use of equipment avoidance or
Risk Assessment & Safe Working Practice
RA Ref Number: 01f Revision: 2 Project/Job Number Reference Insert Job Number Approval Date: 30/03/2018 RA Description: Working at Heights Fixed Tubular Scaffolds Next Review Date: 01/04/2019 Notes: Please
DEMOLITION A GOOD APPROACH TO TAKE
DEMOLITION A GOOD APPROACH TO TAKE INTRODUCTION STEPHEN MCCANN DEMOLITION THIS IS DEMOLITION! DEMOLITION WHAT ACTUALLY APPLIES? WHAT SPECIFICALLY APPLIES TO DEMOLITION? CDM 2007 CDM; REGULATION 29 (SPECIFICALLY)
BHC-P-03.1 Training, Competence and Induction
BHC-P-03.1 Training, Competence and Induction Contents 1.0 Purpose 2.0 Scope 3.0 Definitions 4.0 Main requirements 5.0 Guidance documents and references 6.0 Appendices Revision Register Date Version Description
A-one+ Supply Chain Standards
A-one+ Supply Chain Standards A-one+ Page 1 of 12 Introduction We at A-one+ are committed to achieving an incident and accident free environment through our health and safety strategy. We demand Supply
Your health and safety guide to Falls prevention
Your health and safety guide to Falls prevention EDITION NO. 1 NOVEMBER 2007 HAZARD GUIDE If this Hazard Guide does not contain an up-to-date More information sheet, please go to www.worksafe.vic.gov.au
Dabbrook Services Ltd
Health and Safety Management Systems Page: 1 of 14 Page No 1 HEALTH AND SAFETY ORGANISATION AND RESPONSIBILITIES 2-3 1.1 Organisational Structure for Health and Safety 2 1.2 Individual Responsibilities
Regulated Qualifications Unit and Assessment Specification
Regulated Qualifications Unit and Assessment Specification Unit title Health and Safety in a Construction Environment Regulator unit K/505/1933 code SQA unit code H6VB 58 SSC Ref CSCS H&S History of changes
Training Course Guide 2018
Training Course Guide 2018 1 The Courtyard, Harris Business Park, Stoke Prior B60 4DJ Course Index 1. Accident Investigation and Prevention 2. Asbestos Awareness 3. BOHS 901 Legionella - Management and
HEALTH AND SAFETY EXECUTIVE CONSTRUCTION INDUSTRY ADVISORY COMMITTEE (CONIAC) Review of recent activities of CONIAC s Sub-Groups
Open Government status: Fully Open Exempt material: None Paper Number: M2/2008/6 Meeting Date: 23 June 2008 Type of Paper: Below the line Paper File Reference: Intranet embargo: None HEALTH AND SAFETY
Campbell Arnott s Contractor Management
Campbell Arnott s Contractor Management Registration process The Campbell Arnott s Contractor Management process is completed in two parts: online company registration and online employee registration
This document sets out the rules applicable to all contract companies and their personnel when working on a CF Fertilisers UK Limited (CF) site.
CONTRACTOR EHS REQUIREMENTS FOR ON-SITE WORK Issued by:: EHS Page No: Issue No: Issue Date: Authorised By: Review date: 1 of 8 3 July 2016 N Cook July 2020 1. INTRODUCTION This document sets out the rules
Minerva Consulting Group
Minerva Consulting Group Today's changed and changing workplace demands you be in the best hands for WHS from the word go. Minerva Consulting Group has been providing safety services for over 20 years.
Health and Safety Training. Overview of Statutory Provisions
Health and Safety Training Overview of Statutory Provisions Ibec Occupational Health and Safety Service Confederation House 84/86 Lower Baggot Street Dublin 2 Tel: 01-6051500 Web: www.ibec.ie Disclaimer:
1. OCCUPATIONAL HEALTH AND SAFETY POLICY
DOGS HOMES OF TASMANIA Operated by the Tasmanian Canine Defence League 1. OCCUPATIONAL HEALTH AND SAFETY POLICY The Dogs Homes of Tasmania has a legal and moral responsibility to provide healthy and safe
Trade Contractor (including specialist trades)
Section 1 Your Organisation Pre-qualification Questionnaire for acceptance onto the Eurosafe UK Approved List of Contractors for Health and Safety Contractors with less than 5 employees A Information Requested
OHS Regulations Reform. August 2016
OHS Regulations Reform August 2016 Background > The Occupational Health and Safety Regulations 2007 (OHS Regulations) and the Equipment (Public Safety) Regulations 2007 (EPS Regulations) sunset in June
Health, Safety and Environment Pre-Qualification Questionnaire Health, Safety & Environmental Long Form Questionnaire Version 1, August FINAL
Health, Safety and Environment Pre-Qualification Questionnaire Health, Safety & Environmental Long Form Questionnaire Version 1, August 2016 - FIAL Contract ame: [insert name here] Company ame: [insert
Level 2 NVQ Certificate in Erection of Precast Concrete (Construction)
Level 2 NVQ Certificate in Erection of Precast Concrete (Construction) Qualification Specification ProQual 2016 Contents Introduction 3 Qualification profile 3 Qualification Structure 4 Pathway 1 Flooring
CHAS Health & Safety Training Requirements July 2017
CHAS Health & Safety Training Requirements July 2017 Page1 Introduction The purpose of this document is to provide some basic information and guidance with respect to the types of training and competence
H&S007 Level 2 and 3 Risk Health and Safety Contractor Approval Request
Private Bag 9023 Whangarei 0148 New Zealand T: 09 430 4200 0800 WDC INFO 0800 932 463 F: 09 438 7632 W: www.wdc.govt.nz E: mailroom@wdc.govt.nz H&S007 Level 2 and 3 Risk Health and Safety Contractor Approval
Release: 1. CPCCBC4002A Manage occupational health and safety in the building and construction workplace
Release: 1 CPCCBC4002A Manage occupational health and safety in the building and construction workplace CPCCBC4002A Manage occupational health and safety in the building and construction workplace Modification
ABN: ADDRESS: 103 Copperfield St GEEBUNG, QLD 4034
Page: 1 of 6 Page: 2 of 6 WORK HEALTH SAFETY (WHS) PACK 1 This is the larger pack is best suited to those undertaking structural landscaping, landscape construction and landscape maintenance. It includes
NEVADA DEPARTMENT OF BUSINESS AND INDUSTRY DIVISION OF INDUSTRIAL RELATIONS OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION
NEVADA DEPARTMENT OF BUSINESS AND INDUSTRY DIVISION OF INDUSTRIAL RELATIONS OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION Southern Nevada 1301 N Green Valley Pkwy, Ste. 200 Henderson, NV 89074 Phone: (702)
Health, safety, wellbeing and environment standards handbook
VEHICLE Health, safety, wellbeing and environment standards handbook MARSHAL CONTROL POINT Contents 1 Introduction 2 Language 3 Supervision 4 Culture Injury Free Environment 5 Health and wellbeing 5.1
Review Date 01/01/2017 Director of Estates and Facilities Expiry Date 14/01/2018 Withdrawn Date
Policy No: RM70 Version: 3.0 Name of Policy: Work at Height Policy Effective From: 05/02/2015 Date Ratified 15/01/2015 Ratified Health and Safety Committee Review Date 01/01/2017 Sponsor Director of Estates
Health & Safety Policy
Health & Safety Policy March 16_rev 1.0 Page 1 H&S Policy Manual Contents 1. INTRODUCTION 2. POLICY STATEMENT 3. OBJECTIVES SHORT TERM OBJECTIVES 4. OVERVIEW OF H&S POLICY SYSTEM FUNCTIONAL PRINCIPLES
Working at height and the safe use of plant and machinery in schools
Working at height and the safe use of plant and machinery in schools Presented by: Steve Schroder We are a family owned business who pride ourselves on providing sensible, pragmatic advice for businesses.
PGR Innovations Limited. Company Policy For Health & Safety
PGR Innovations Limited Company Policy For Health & Safety January 2012 CONTENTS Company Policy Statement 1.0 Organisation Duties And Responsibilities 2.0 Managing Director 2.1 Projects Managers and Site
ABOUT HOLLAND TCS ACCREDITATION
ABOUT HOLLAND TCS At Holland TCS, our people come to work every day because they want to ensure that we solve problems for our clients by delivering the most effective solutions. We play a key role in
Understanding Health Risks whilst Creating & Sustaining a Well Workplace Introduction
Understanding Health Risks whilst Creating & Sustaining a Well Workplace Introduction This tool is designed to help you in your understanding of the health needs within your working environment and population.
Management of Contractors Procedure
Management of Contractors Procedure Version Control Sheet Version Date Reviewed By Revision Details 1.0 28/08/2015 Louise Newsham Changes to job titles and roles. Reviewed to include recent legislative
Prevention of falls in general construction
Compliance code Prevention of falls in general construction Edition 1 October 2018 Contents Preface 2 Part 1 Introduction 3 Purpose 3 Scope 3 Application 4 Who has duties? 4 The risk management process
HEALTH AND SAFETY POLICY
HEALTH AND SAFETY POLICY Prepared for: Limited Unit A9 Bell Lane Office Village Little Chalfont Bucks HP6 6GL Date of Issue: 3 Feb 2014 Current Issue 9 June 2017 Issue 5 Tel: 01494 765671 Fax: 01494 549852
CONTRACTOR WHS SYSTEM STANDARD RISK MANAGEMENT EXTERNAL USE ONLY
CONTRACTOR WHS SYSTEM STANDARD RISK MANAGEMENT EXTERNAL USE ONLY Principles in the Optus Contractor WHS management process CONTRACTOR MANAGEMENT STAGES PRINCIPLES THIS STANDARD REQUISITION Requisition
Course in Owner Builder Compliance NTIS code: 91509NSW. Participants Guide
Course in Owner Builder Compliance NTIS code: 91509NSW Participants Guide COPYRIGHT 2010 NSW Fair Trading All rights reserved This work is copyright to NSW Fair Trading and available under licence from
Health and Safety Toolkit
Health and Safety Toolkit H&S Conception, Design & Planning Checklist This checklist is for use at the outset of a project and should be regularly reviewed as the concept and design phases progress. The
Safe planning and operation for Mobile Elevated Working Platforms (MEWPs)
Safe planning and operation for Mobile Elevated Working Platforms (MEWPs) This document sets out the Morgan Sindall standards for the control of Mobile Elevated Work Platforms (MEWP) on its projects. It
Fall Protection Plan Developer (FPPD) Unit Standard (229994) Target audience and relevance. Course content. Course duration
Fall Protection Plan Developer (FPPD) Unit Standard (229994) The person wishing to acquire the competencies in this standard will be people responsible for the safety and protection of people working at
Your health and safety guide to Quarries
Your health and safety guide to Quarries EDITION NO. 1 APRIL 2008 INDUSTRY GUIDE If this Industry Guide does not contain an up-to-date More information sheet, please go to www.worksafe.vic.gov.au to download
HIGH RISK ACTIVITIES. GD02 Scaffold planning and work at height activities checklist. Design stage. Tender stage. Element Yes No N/A Comments
GD02 Scaffold planning and work at height activities checklist Company name Location Project title Contract no. Design stage Considerations at design stage (pre-construction information/temporary works
Health & Safety Plan DEMOLITION WORKS: No 2 Substation
DEMOLITION WORKS: No 2 Substation Revision History Revision Date Section Detail of Amendment By r3a 09/10/14 First Issue JH 17 October 2014 Page 2 Revision 4 Contents 1. Description of Project 1.1. Introduction
Construction, Planning and the Built Environment Unit Content and Assessment Guidance (Attachments pathway)
Construction, Planning and the Built Environment Unit Content and Assessment Guidance (Attachments pathway) NCFE Level 2 NVQ Certificate in Plant Operations (Construction) (Attachments pathway) (601/7277/0)
N.B.:- Please ensure all requested documents are included with your submission, as failure to do this will delay your submission
Pre-qualification Questionnaire for acceptance onto the Eurosafe UK Approved List of Contractors for Health and Safety Contractors with 5 or more employees N.B.:- Please ensure all requested documents
CDM FAQ Sheet
CDM 2015 - FAQ Sheet 1. The change to the regulations means Domestic works are now included. What if you are doing DIY in your own house? Do the regulations apply to this? If the home owner is doing the
HSG264 - ASBESTOS: THE SURVEY GUIDE DUTYHOLDER KEY POINTS SUMMARY. HSG264 Asbestos: The Survey guide contains a number of coloured summary boxes.
HSG264 Asbestos: The Survey guide contains a number of coloured summary boxes. Below is a quick reference guide of the green summary boxes Specific guidance for clients / dutyholders. The purpose of an
HEALTH AND SAFETY CONTRACT BETWEEN EMPLOYER AND MANDATORY (CONTRACTOR) SECTION 37(2) OF THE OHS ACT, ACT 85 OF 1993
P a g e 1 SUBJECT ISSUED BY APPROVED BY CONTRACT CONTRACT BETWEEN EMPLOYER AND MANDATORY SAFETY MANAGER: SUN CITY RESORT DIRECTOR OF OPERATIONS PAGE 1 OF 15 EFFECTIVE: REVISION NO: 1 HEALTH AND SAFETY
GUIDELINES FOR DEVELOPING AND IMPLEMENTING A WORKPLACE HEALTH AND SAFETY POLICY
What does the MHSA say? Section 8 of the MHSA describes what the occupational health and safety policy is; what you should put in it, and how you should go about preparing it, making people know about
WORK HEALTH, SAFETY AND WELLBEING (WHS&W)
WORK HEALTH, SAFETY AND WELLBEING (WHS&W) PLANNING 2.3 WORK HEALTH SAFETY AND WELLBEING (WHS&W) TRAINING NEEDS ANALYSIS (TNA) AND TRAINING PLAN Aim To prescribe the responsibilities and actions required
Designer Guidance. Five or more employees. Health and Safety
Designer Five or more employees 1 CONTENTS INTRODUCTION 3 Further reading / additional resources 3 QUESTION 1: POLICY AND ORGANISATION 4 4 4 QUESTION 2: ARRANGEMENTS/PROCEDURES FOR HEALTH AND SAFETY MANAGEMENT
Health & Safety Policy
(Insert c Health & Safety Policy Health and Safety at Work etc Act 1974 Management of Health and Safety at Work Regulations 1999 This is the Health and Safety Policy Statement of Absolute Arboriculture
Health and Safety Policy and Procedures
1 Health and Safety Policy and Procedures 2 This page is intentionally blank. Wadham College Contents General Policy A declaration of our intent to provide and maintain, so far as is reasonably practicable,
Level 2 NVQ Diploma in Accessing Operations And Rigging (Construction) Qualification Specification
Level 2 NVQ Diploma in Accessing Operations And Rigging (Construction) Qualification Specification ProQual 2017 Contents Page Introduction 3 Qualification profile 3 Qualification structure 4 Centre requirements
SAFE WORK METHOD STATEMENT
SAFE WORK METHOD STATEMENT Principal Contractor: ROBERT LIVINGSTONE Project Address: 123 SYDNEY ROAD SYDNEY NSW 2000 High Risk Work Hazards and Risks Identified Control Measures Persons working at a height
S33 Opening Statement Workplace Rules
S33 Opening Statement Workplace Rules Having a small number of clear, concise rules is important and it helps to set the standards that you require people to work to. The Workplace Rules Procedure covers
CONTROLLING CONTRACTORS (Completely Rewritten)
CONTROLLING CONTRACTORS (Completely Rewritten) 1.0 Purpose To ensure that the Health, Safety and Environmental risks associated with the employment of contractors are controlled through compliance with
Increase of our H&S performance by an effective contractor managment. Dr. Harald Wachsmuth, Uniper Technologies,
Increase of our H&S performance by an effective contractor managment Dr. Harald Wachsmuth, Uniper Technologies, 24.2.2016 Our Major Asset Projects construction(and decommissioning) Algeciras, Spain Gönyü,
ETELÄ KARJALAN JÄTEHUOLTO OY DRY DIGESTION FACILITY AND BIOGAS UPGRADING AND FILLING STATION DESIGN AND TURN KEY CONTRACT
ETELÄ KARJALAN JÄTEHUOLTO OY DRY DIGESTION FACILITY AND BIOGAS UPGRADING AND FILLING STATION DESIGN AND TURN KEY CONTRACT SAFETY DOCUMENT, SAFETY REGULATIONS AND CODE OF PRACTICE 25.05.2018 Contents 1
NATIONAL DEPARTMENT OF LABOUR INSPECTION AND ENFORCEMENT SERVICES National Institute for Occupational Health. 23 rd MARCH /27/2017
NATIONAL DEPARTMENT OF LABOUR INSPECTION AND ENFORCEMENT SERVICES National Institute for Occupational Health. 23 rd MARCH 2017 3/27/2017 1 CHIEF DIRECTORATE : OCCUPATIONAL HEALTH AND SAFETY DIRECTORATE:
CDM 2015 In Practice. Craig Foyle CFIOSH IMaPS / Raymond Bone CMIOSH CFaPS. Version 1.0
CDM 2015 In Practice Craig Foyle CFIOSH IMaPS / Raymond Bone CMIOSH CFaPS Version 1.0 Speakers Craig Foyle Involved in engineering construction / construction projects for over twenty years working in
Health, Safety & Wellbeing Policy
Clacton County High School Health, Safety & Wellbeing Policy This Document was originally approved: January 2013 This Document was Last Reviewed: September 2017 This Document is due for review: September
Construction Method Statement
Construction Method Statement Planning Application Phase 17 October 2014 for 79-85 Monier Road London E3 2PS Penten Group Ltd 816 Garratt Lane London SW17 0LZ Tel: 020 8772 4040 Description Contents Page
Level 2 NVQ Diploma in Formwork ( ) December 2015 Version 4.0
Level 2 NVQ Diploma in Formwork (6580-02) December 2015 Version 4.0 QUALIFICATION HANDBOOK Qualification at a glance Subject area City & Guilds number 6580 Formwork Age group approved 16-18, 19+ Entry
Petroleum HSE Controls Framework. An introduction
Petroleum HSE Controls Framework An introduction HSE Controls Framework what does it look like? Group Level Documents Our Requirements (GLDs) State minimum mandatory requirements for application across
T. Sathyapriya, PG Scholar
=================================================================== Vol. 1:5 December 2016 ==================================================================== A Proposed System of Safety Management for
SECTION 1: APPLICANT INFORMATION. 1. Have you contacted your local Chapter regarding their established submission process or procedure?
2018 CONSTRUCTION SAFETY EXCELLENCE AWARDS APPLICATION INSTRUCTION STEPS: 1. DOWNLOAD FORM 2. FILL OUT 3. SUBMIT DEADLINE FEBRUARY 2, 2018 SECTION 1: APPLICANT INFORMATION 1. Have you contacted your local
Who is responsible for construction safety? Presented by WorkSafe Victoria and Master Builders Association Victoria
Who is responsible for construction safety? Presented by WorkSafe Victoria and Master Builders Association Victoria Work Safe Week 2013 For the respect of others please ensure your mobile phone is switched
to? A. 1 day B. 2 days C. 3 days D. no days
01 What should you do if you see co-workers working on the 20th floor of a building without any guardrails on its open side? A. Ignore it and carry on working. B. Help them to finish the work faster. C.
HSE Auditing Procedures
HSE Auditing Procedures HSE Auditing is a Systematic Examination that involves Analysis, Tests and Confirmations of Operational Procedures and Practices to verify whether they conform and comply with Legal
3: CONTRACTOR HSMS COMPLIANCE AUDIT TOOL
Title: This compliance tool is to be performed on Contractor HSMS plans. It can be used throughout the duration when the contractor submits the generic/specific WHS plan prior to arrival and desktop audit
All Employees Temporary Workers (including Resource Solutions Staff)
1. POLICY STATEMENT 2. RESPONSIBILITIES a. The Board Directors b. Director Responsible for Safety (CFO) c. The Chief Information Officer d. The Group HR Director e. Group General Counsel f. The Appointed
WHS Management Plans
WHS Management Plans Disclaimer This Guide provides general information about the obligations of persons conducting a business or undertaking and/or persons in control of premises and workers under the
SAFE WORK METHOD STATEMENT
SWMS 002 Erect / Dismantle Single Bay Towers and/or Multiple Bay Towers Page of 9 ABN: 40 088 478 399 This SWMS has been prepared and authorised by OLDFIELDS ACCESS PTY LTD ACN: 088 478 399 Date: Issue
Annex I: Summary of duty holders
The Construction (Design and Management) Regulations 2007: Industry Guidance Annex I: Summary of duty holders Summary of key changes in CDM 2007 Regulations are re-ordered to group duties together by duty
Health and Safety Policy
Paragon Asra Housing Limited Health and Safety Policy November 2017 Owning manager Chris Whelan, Executive Director Development & Sales Department Business Development Approved by Board - 24 November 2017
HS00: CONSTRUCTION PHASE HEALTH & SAFETY PLAN JOB THE PADDOCKS - SAMPLE PROJECT FOR TRIAL USERS: THE PADDOCKS 2015
HS00: CONSTRUCTION PHASE HEALTH & SAFETY PLAN JOB THE PADDOCKS - SAMPLE PROJECT FOR TRIAL USERS: THE PADDOCKS 2015 Client: John Smith TEST Site Address: Principal Designer: [Principal Designer] Principal