Engineering Maintenance and Installation
|
|
|
- Mervin Miller
- 5 years ago
- Views:
Transcription
1 Engineering Maintenance and Installation AWarded by Excellence, Achievement & Learning Limited Accredited from 07/10/2004 to 31/10/2013 Group award number G7K7 22 Level 2 Standards This SVQ is based on standards developed by SEMTA. SEMTA draws its membership from the engineering industry. Structure of the SVQ The way the SVQ is made up is shown below. The unit title appears in bold and the elements that make up each unit are listed under the unit title. Mandatory units Candidates must complete all of these units: Complying with Statutory Regulations and Organisational Safety Requirements Complying with statutory regulations and organisational safety requirements Using and Interpreting Engineering Data and Documentation Using and interpreting engineering data and documentation Working Efficiently and Effectively in Engineering Working efficiently and effectively in engineering Optional units Mechanical Maintenance
2 Carrying Out Fault Location on Mechanical Equipment Carrying Out Maintenance Activities on Mechanical Equipment Restoring Mechanical Components to Usable Condition by Repair Carrying Out Scheduled Maintenance Activities on Mechanical Equipment Electrical Maintenance Carrying Out Fault Location on Electrical Equipment and Circuits Carrying Out Maintenance Activities on Electrical Equipment Carrying Out Modifications or Rewiring Electrical Circuits Carrying Out Scheduled Maintenance Tasks on Electrical Equipment Electronic Maintenance
3 Carrying Out Fault Location on Electronic Equipment and Circuits Carrying Out Tests on Electronic Equipment and Circuits Carrying Out Repairs to Electronic Equipment Fluid Power Maintenance Carrying Out Fault Location on Fluid Power Equipment and Circuits Carrying Out Maintenance Activities on Fluid Power Equipment Carrying Out Scheduled Maintenance Tasks on Fluid Power Equipment Services Maintenance Carrying Out Fault Location on Service Systems and Equipment
4 Carrying Out Scheduled Maintenance Tasks on Service Systems and Equipment Carrying Out Maintenance on Water Distribution Systems and Equipment Carrying Out Maintenance on Emergency Power Generation Equipment Carrying Out Maintenance on Workplace Environmental Control Equipment Carrying Out Maintenance on Heating and Ventilation Equipment Carrying Out Maintenance on Air Conditioning and Ventilation Equipment Carrying Out Maintenance on Gas Distribution Equipment Carrying Out Maintenance on Compressed Air Equipment Carrying Out Maintenance on Process Control Equipment Carrying Out Maintenance on Instrumentation and Control Equipment Carrying Out Maintenance on Industrial Refrigeration Equipment
5 Carrying Out Maintenance on Environmental Control Equipment Communication-Electronics Maintenance Carrying Out Fault Location on Communication-Electronic Systems Carry Out Scheduled Maintenance on Communication-Electronic Systems Candidates must also select one of the following units: Carrying Out Repairs to Communication-Electronic Systems Carrying Out Modifications to Communication-Electronic Systems Carrying Out Tests on Communication-Electronic Systems Carrying Out the Configuration of Communication-Electronic Systems Assisting in the Installation of Communication-Electronic Systems Servicing Stairlifts
6 Carrying Out Fault Location on Stairlift Equipment Carrying Out Servicing Activities on Stairlift Equipment Restoring Stairlifts to Service by Replacing or Repairing Components Servicing Service Lifts Carrying Out Fault Location on Service Lifts Carrying Out Servicing of Service Lift Equipment Restoring Service Lifts to Service by Replacing or Repairing Components Installing Stairlifts Carrying Out Fault Location on Stairlift Equipment Installing Stairlifts Installing Service Lifts
7 Carrying Out Fault Location on Service Lifts Installing Service Lifts Equipment Installation Assisting in the Installation of Mechanical Equipment Assisting in the Installation of Electrical/Electronic Equipment Assisting in the Installation of Equipment to Produce an Engineered System Assisting in the Installation of Instrumentation and Control Equipment Assisting in the Installation of Fluid Power Equipment Assisting in the Installation of Process Control Equipment Assisting in the Installation of Emergency Electrical Power Generation Equipment
8 Assisting in the Installation of Environmental Pollution Control Equipment Assisting in the Installation of Workplace Environmental Control Equipment Assisting in the Installation of Heating and Ventilation Equipment Assisting in the Installation of Air Conditioning and Ventilation Equipment Assisting in the Installation of Compressed Air Equipment Assisting in the Installation of Waste Water/Foul Water Distribution Equipment Assisting in the Installation of Fresh Water Distribution Equipment Assisting in the Installation of Refrigeration Equipment Installing Lifting Platforms Assisting in the installation of refrigeration equipment Assisting in the installation of fresh water distribution equipment
9 Assisting in the installation of waste water/foul water distribution Assisting in the installation of compressed air equipment Assisting in the installation of air conditioning and ventilation equipment Assisting in the installation of heating and ventilation equipment Assisting in the installation of workplace environmental control equipment Assisting in the installation of environmental pollution control equipment Assisting in the installation of emergency electrical power generation equipment Assisting in the installation of process control equipment Assisting in the installation of fluid power equipment Assisting in the installation of instrumentation and control equipment Assisting in the installation of equipment to produce an engineered system Assisting in the installation of electrical/electronic equipment Assisting in the installation of mechanical equipment Candidates must select one of the following units: Installing service lifts Carrying out fault location on service lifts
10 Installing stairlifts Carrying out fault location on stairlift equipment Restoring service lifts to service by replacing or repairing components Carrying out servicing of service lift equipment Carrying out fault location on service lifts Restoring stairlifts to service by replacing or repairing components Carrying out servicing activities on stairlift equipment Carrying out fault location on stairlift equipment Assisting in the installation of communication-electronic systems Carrying out the configuration of communication-electronic systems Carrying out tests on communication-electronic systems
11 Carrying out modifications to communication-electronic systems Carrying out repairs to communication-electronic systems Carry out scheduled maintenance on communication-electronic systems Carrying out fault location on communication-electronic systems Carrying out maintenance on environmental control equipment Carrying out maintenance on industrial refrigeration equipment Carrying out maintenance on instrumentation and control equipment Carrying out maintenance on process control equipment Carrying out maintenance on compressed air equipment Carrying out maintenance on gas distribution equipment Carrying out maintenance on air conditioning and ventilation equipment Carrying out maintenance on heating and ventilation equipment Carrying out maintenance on workplace environmental control equipment Carrying out maintenance on emergency power generation equipment Carrying out maintenance on water distribution systems and equipment Carrying out scheduled maintenance tasks on service systems and equipment
12 Candidates must also select one of the following units: Carrying out fault location on service systems and equipment Carrying out scheduled maintenance tasks on fluid power equipment Carrying out maintenance activities on fluid power equipment Carrying out fault location on fluid power equipment and circuits Carrying out repairs to electronic equipment Carrying out tests on electronic equipment and circuits Carrying out fault location on electronic equipment and circuits Carrying out scheduled maintenance tasks on electrical equipment Carrying out modifications or rewiring electrical circuits Carrying out maintenance activities on electrical equipment Candidates must also select one of the following units:
13 Carrying out fault location on electrical equipment and circuits Carrying out scheduled maintenance activities on mechanical equipment Restoring mechanical components to usable condition by repair Carrying out maintenance activities on mechanical equipment Candidates must also select one of the following units: Carrying out fault location on mechanical equipment Candidates must also complete the relevant number of optional units for the chosen pathway, in addition to the mandatory units: Carrying Out Fault Location on Lifting Platforms Installing Lifting Platforms Installing lifting platforms Servicing Lifting Platforms
14 Carrying Out Fault Location on Lifting Platforms Carrying out fault location on lifting platforms Carrying Out Servicing of Lifting Platforms Carrying out servicing of lifting platforms Restoring Lifting Platforms to Service by Replacing or Repairing Components Restoring lifting platforms to service by replacing or repairing components Assistive Technology Systems and Equipment Maintenance Carrying Out Fault Location Activities on Assistive Technology Systems and Equipment Carrying out fault location activities on assistive technology systems and equipment Carrying Out Scheduled Servicing Activities on Assistive Technology Systems and Equipment Carrying out scheduled servicing activities on assistive technology systems and equipment Carrying Out Maintenance and Repair Activities on Assistive Technology Systems and Equipment Carrying out maintenance and repair activities on assistive technology systems and equipment Carrying out fault location on lifting platforms There may be publications available to support this qualification. For more information, please contact: Excellence, Achievement & Learning Limited Unit 2, The Orient Centre Greycaine Road Watford Herts WD24 7GP T: +44 (0) F: +44 (0) Website:
15 Ã Â Scottish Qualifications Authority 2013
NGINEERING. Level 3 NVQ Diploma in. Engineering Maintenance. Qualification Specification. Issue 1.1
1 www.eal.org.uk Level 3 NVQ Diploma in NGINEERING Engineering Maintenance Qualification Specification Overview This qualification is for learners who need recognition of their competence in one or more
The NI Apprenticeship in Engineering Maintenance
The NI Apprenticeship in Version 1 Copyright Semta November 2017 1 1. Occupational Framewk Title Framewk f Nthern Ireland The NI Apprenticeship in 2. Occupational Profile Technicians maintain the safety
Identification of National Occupational Standards for shore-based engineering occupations for potential use in the maritime sector
Identification of National Occupational Standards for shore-based engineering occupations for potential use in the maritime sector OSCEng 23 March 2007 Page 1 of 68 Contents Introduction 3 Methodology
The NI Traineeship in Engineering Maintenance
The NI Traineeship in Engineering Version 1 Copyright Semta November 2017 1 1. Occupational Framewk Title NI Traineeship in Engineering Framewk f Nthern Ireland There are two different routes through this
Norbord Inverness. Modern Apprenticeship Programme SVQ3
Norbord Inverness Modern Apprenticeship Programme SVQ3 About Us Norbord Europe, part of Norbord Incorporated, is a world-leading manufacturer of wood-based panel products, specialising in OSB (Oriented
NGINEERING. Level 4 NVQ Extended Diploma in. Engineering Manufacture. Qualification Specification. Issue 1.1
1 www.eal.org.uk Level 4 NVQ Extended Diploma in NGINEERING Engineering Manufacture Qualification Specification Overview This qualification is a National Vocational Qualification (NVQ). It provides learners
NGINEERING. Level 3 NVQ Diploma in. Qualification Specification. Issue 1.0
1 www.eal.org.uk Level 3 NVQ Diploma in Engineering NGINEERING Toolmaking Qualification Specification Overview This qualification is a National Vocational Qualification (NVQ). It involves the skills and
SVQ PEO ASSESSMENT STRATEGY
Semta SVQ Level 1 and 2 Performing Engineering Operations Assessment Strategy ACG Approved 25 July 2012 Version 2 1 Table of Contents Introduction 3 Scope of the Qualification 4 Qualification Structure
QUALIFICATION HANDBOOK
QUALIFICATION HANDBOOK Level 2 NVQ Diploma in Plastering (Construction) (6573-22/24) March 2018 Version 1.0 Qualification at a glance Subject area Plastering (Construction) City & Guilds number 6573 Age
EAL Level 2 Diploma in Rail Engineering Operative Competence
EAL Level 2 Diploma in Rail Engineering Operative Competence Qualification specification Overview This competence qualification has been developed by the Rail Engineering Employers Trailblazer group and
This SVQ is based on standards developed by Improve. Improve draws its membership from the food industry.
Awarded by Scottish Qualifications Authority and Improve Accredited from 17/09/2008 to 31/12/2012 Group award number G92K 22 Food Manufacture: Process Bakery Skills Level 2 Standards This SVQ is based
SEMLATA3-11 Diagnose faults, repair and maintain scientific or technical equipment for workplace activities
Diagnose faults, repair and maintain scientific or technical equipment Overview This unit covers the competences you need to diagnose faults, repair and maintain scientific or technical equipment, in accordance
QUALIFICATION HANDBOOK
QUALIFICATION HANDBOOK Level 3 NVQ Diploma in Plastering (Construction) (6573-07/08) April 2018 Version 1.1 Qualification at a glance Subject area City & Guilds number 6573 Age group approved 16-18; 19+
Certificate in Electrical Power Engineering - Overhead Lines at SCQF Level 5 ( )
Certificate in Electrical Power Engineering - Overhead Lines at SCQF Level 5 (2343-53) Unit handbook www.cityandguilds.com July 2016 Version 1.1 Contents 1 About this document 3 Unit 001 Working safely
QUALIFICATION HANDBOOK
QUALIFICATION HANDBOOK Level 2 NVQ Diploma in Controlling Lifting Operations - Slinger/Signaller (Construction) (6564-02) May 2013 Version 1.0 Qualification at a glance Subject area Controlling Lifting
Qualification manual
Qualification manual Qualification title: EAL Level 3 NVQ Extended Diploma in Engineering Maintenance (QCF) Qualification code: 600/2084/2 NVQ qualification manual Issue A] Contents 1.0 About EAL... 3
Electrical Engineering
Electrical Engineering Unit - EE06 Fault Diagnosis on Electrical Systems This training specification has been developed from the utilities engineering technician standard. This training specification details
Assessment Strategy for SVQs in. Supply Chain Management and Procurement
Assessment Strategy for SVQs in February 2014 Chartered Institute of Purchasing and Supply, Chartered Institute of Logistics and Transport (UK) and Skills for Logistics ACG Approved 5 March 2014 v.1 Introduction
The NI Traineeship in Fabrication and Welding Engineering
The NI Traineeship in Fabrication and Welding Engineering Version 1 Copyright Semta November 2017 1 1. Occupational Framework Title Framework for Northern Ireland NI Traineeship in Fabrication and Welding
Construction, Planning and the Built Environment Unit Content and Assessment Guidance (Attachments pathway)
Construction, Planning and the Built Environment Unit Content and Assessment Guidance (Attachments pathway) NCFE Level 2 NVQ Certificate in Plant Operations (Construction) (Attachments pathway) (601/7277/0)
Level 2 NVQ Diploma in Construction Operations and Civil Engineering Services - Construction Operations (Construction) (6574)
QUALIFICATION HANDBOOK Level 2 NVQ Diploma in Construction Operations and Civil Engineering Services - Construction Operations (Construction) (6574) September 2017 Version 3.2 Qualification at a glance
NZQA registered unit standard 9537 version 5 Page 1 of 6. This unit standard applies to operational activities carried out on producing wellheads.
Page 1 of 6 Title Replace faulty petrochemical wellhead equipment Level 4 Credits 8 Purpose This unit standard applies to operational activities carried out on producing wellheads. People credited with
QUALIFICATION HANDBOOK
QUALIFICATION HANDBOOK Level 3 NVQ Diploma in Fenestration Installation (6575-03) May 2013 Version 1.0 Qualification at a glance Subject area City & Guilds number 6575 Construction Age group approved 16-18,
ANUFACTURING NGINEERING. Level 3 Diploma in. Manufacturing and Engineering - Product Design and Development. Technician (Development Competence)
Level 3 Diploma in Advanced ANUFACTURING Manufacturing and Engineering - Product Design and Development NGINEERING Technician (Development Competence) Qualification Specification Overview This qualification
QUALIFICATION HANDBOOK
QUALIFICATION HANDBOOK Level 6 NVQ Diploma in Construction Site Management (Construction) (6578) November 2013 Version 1.0 Qualification at a glance Subject area City & Guilds number 6578 Age group approved
Qualification manual
Qualification manual Qualification title: EAL Level 2 NVQ Diploma in Rail Engineering Track Maintenance Qualification code: 601/0198/2 NVQ qualification manual - Issue B] Contents Contents... 2 1.0 About
-SQA- SCOTTISH QUALIFICATIONS AUTHORITY NATIONAL CERTIFICATE MODULE: UNIT SPECIFICATION GENERAL INFORMATION. -Module Number Session
-SQA- SCOTTISH QUALIFICATIONS AUTHORITY NATIONAL CERTIFICATE MODULE: UNIT SPECIFICATION GENERAL INFORMATION -Module Number- 4260173 -Session- 1993-94 -Superclass- TK -Title- PROVIDING TEMPORARY SUPPORT
Level 2 NVQ Diploma in Formwork ( ) December 2015 Version 4.0
Level 2 NVQ Diploma in Formwork (6580-02) December 2015 Version 4.0 QUALIFICATION HANDBOOK Qualification at a glance Subject area City & Guilds number 6580 Formwork Age group approved 16-18, 19+ Entry
QUALIFICATION HANDBOOK
QUALIFICATION HANDBOOK Level 2 NVQ Diploma in Roofing Occupations (Construction) (6569) September 2017 Version 1.3 Qualification at a glance Subject area City & Guilds number 6569 Construction Age group
SEMPMO211 - SQA Unit Code H04E 04 Producing products by processing
Overview This unit covers the skills and knowledge you will need to carry out processing operations on materials or products which involves using a pre-defined sequence of events that changes the physical
-SQA- SCOTTISH QUALIFICATIONS AUTHORITY NATIONAL CERTIFICATE MODULE: UNIT SPECIFICATION GENERAL INFORMATION. -Module Number Session
-SQA- SCOTTISH QUALIFICATIONS AUTHORITY NATIONAL CERTIFICATE MODULE: UNIT SPECIFICATION GENERAL INFORMATION -Module Number- 2211184 -Session-1994-95 -Superclass- TK -Title- PLANT OPERATIONS: PROVIDING
Qualification and Assessment Specification
Qualification and Assessment Specification NOCN Level 2 NVQ Diploma in Plastering Qualification No: 600/7969/1 Operational Start Date: 1st February 2013 Version 2.0 December 2017 Introduction NOCN is a
Level 2 NVQ Diploma in Construction Plant or Machinery Maintenance (Construction)
Level 2 NVQ Diploma in Construction Plant or Machinery Maintenance (Construction) Qualification Specification ProQual 2017 Contents Page Introduction 3 Qualification profile 3 Qualification Structure 4
Certificate in Electrical Power Engineering - Underground Cables at SCQF Level 5 ( ) Unit Handbook
Certificate in Electrical Power Engineering - Underground Cables at SCQF Level 5 (2343-52) Unit Handbook www.cityandguilds.com July 2016 Version 1.1 Contents 1 About this document 3 Unit 001 Working safely
Conform to General Workplace Health, Safety and Welfare (SCQF level 6)
National Unit specification: general information Unit code: H106 12 Superclass: TE Publication date: March 2012 Source: Scottish Qualifications Authority Version: 01 Summary This Unit is suitable for candidates
Building Services Engineering: An Introduction (SCQF level 4)
National Unit specification: general information Unit code: FT88 10 Superclass: TH Publication date: August 2011 Source: Scottish Qualifications Authority Version: 01 Summary This is a mandatory unit of
Skills for Logistics. Assessment Strategy for SVQs. May 2010
Skills for Logistics Assessment Strategy for SVQs May 2010 Skills for Logistics 12 Warren Yard Warren Farm Office Village Milton Keynes MK12 5NW T 01908 313360 E info@skillsforlogistics.org W www.skillsforlogistics.org
SEMEMI SQA Unit Code H2B2 04 Carrying out maintenance on compressed air equipment
Carrying out maintenance on compressed air equipment Overview This unit identifies the competences you need to carry out corrective maintenance activities on compressed air systems and equipment, in accordance
Training Standard Draft Only
Title Duration Purpose/ Scope Occupational Relevance Health and Safety in Construction (Site Manager) Minimum 5 days of 6 learning hours per day Purpose: The purpose of training delivered against this
EDI Level 2 Award in Employment Responsibilities and Rights in Health, Social Care and Children and Young People s Settings
Vocational Qualifications EDI Level 2 Award in Employment Responsibilities and Rights in Health, Social Care and Children and Young People s Settings Candidate Pack Effective from: 1 October 2010 Accreditation
Qualification Manual. EAL Level 3 NVQ Diploma in the Supervision of Port Operations. Qualification Number 500/1435/3
Qualification Manual EAL Level 3 NVQ Diploma in the Supervision of Port Operations Qualification Number 500/1435/3 Contents 1.0 About EAL 3 1.1 Equal opportunities and diversity 3 1.2 Customer feedback
Construction Technician SVQs. Assessment Methodology
Construction Technician SVQs Assessment Methodology February 2017 Contents Assessment Methodology for Construction Technician... 1 1 External Quality Control of assessment... 1 2 Simulation and workplace
Unit title: Construction Crafts: Associated Subjects (SCQF level 6)
National Unit specification: general information Unit code: H108 12 Superclass: TE Publication date: March 2012 Source: Scottish Qualifications Authority Version: 01 Summary This Unit is suitable for candidates
Level 3 NVQ Diploma in Wood Occupations (Construction) (6571) August 2015 Version 4.4
QUALIFICATION HANDBOOK Level 3 NVQ Diploma in Wood Occupations (Construction) (6571) August 2015 Version 4.4 Qualification at a glance Subject area City & Guilds number 6571 Age group approved 16-18,19+
Wastewater Treatment Technician
Wastewater Treatment Technician Unit WWTTC04 Screening & Grit Removal This training specification has been developed from the water process technician standard. The specification details the minimum training
Level 2 NVQ Diploma in Wood Occupations (Construction) (6571)
Level 2 NVQ Diploma in Wood Occupations (Construction) (6571) QUALIFICATION LOGBOOK September 2017 Version 3.3 Candidate Logbook/Work-Based Evidence Record Mandatory Units Level 2 NVQ Diploma in Wood Occupations
Apply earths to and remove earths from electrical conductors, plant and equipment
Page 1 of 5 Apply earths to and remove earths from electrical conductors, plant and equipment Level 3 Credits 2 Purpose People credited with this unit standard are able to: demonstrate knowledge of earthing
Level 2 Diploma in Steel Erecting
Qualification Specification ProQual 2017 Contents Page Introduction 3 Qualification profile 3 Qualification structure 4 Centre requirements 5 Support for candidates 5 Assessment 6 Internal quality assurance
Level 3 Testing ICT systems 3 (7266/ / )
Level 3 Testing ICT systems 3 (7266/7267-505/7540-321) e-quals Assignment guide for Candidates Assignment D www.cityandguilds.com/e-quals07 August 2009 Version 1.1 About City & Guilds City & Guilds is
Maritime Defence Engineering (Foundation Competence)
EAL Level 2 Diploma in Maritime Defence Engineering (Foundation Competence) Qualification specification Overview This qualification covers the specific skills, knowledge and behaviours for a range of maritime
Assessment Strategy. For use with competency based qualifications within the Fashion and Textiles sector. Update November 2014.
Assessment Strategy Assessment Strategy For use with competency based qualifications within the Fashion and Textiles sector Update November 2014 Version 3 Contents 1 Introduction... 3 1.1 The Assessment
Level 3 NVQ Diploma in Mechanical Manufacturing Engineering (Spring Making) ( ) February 2018 Version 1.1
QUALIFICATION HANDBOOK Level 3 NVQ Diploma in Mechanical Manufacturing Engineering (Spring Making) (1712-37) February 2018 Version 1.1 Qualification at a glance Subject area City & Guilds number 1712 Age
Qualification and Assessment Specification
Qualification and Assessment Specification NOCN Level 3 NVQ Diploma in Heritage Skills Qualification No: 601/1431/9 Operational Start Date: 1st December 2013 Version 3.0 December 2017 Introduction NOCN
Level 2 NVQ Diploma in Specialist Concrete Operations (Construction)
(Construction) Qualification Specification ProQual 2017 Contents Page Introduction 3 Qualification profile 3 Qualification structure 4 Centre requirements 10 Support for candidates 10 Assessment 10 Internal
NZQA registered unit standard 9536 version 5 Page 1 of 6. Undertake petrochemical wellhead maintenance activities under supervision
Page 1 of 6 Title Undertake petrochemical wellhead maintenance activities under supervision Level 3 Credits 4 Purpose This unit standard applies to operational activities carried out on producing wellheads.
SEMFEW311 - SQA Unit Code HIWE 04 Preparing resistance spot, seam and projection welding machines for production
Preparing resistance spot, seam and projection welding machines for Overview This unit identifies the competencies you need to prepare a resistance spot, seam or projection welding installation for in
Level 2 NVQ Diploma in Specialist Concrete Operations (Construction)
(Construction) Qualification Specification ProQual 2015 Contents Page Introduction 3 The Qualifications and Credit Framework (QCF) 3 Qualification profile 4 Rules of combination 5 Centre requirements 11
QUALIFICATION HANDBOOK
QUALIFICATION HANDBOOK Level 2 NVQ Certificate/Diploma in Interior Systems (Construction) (6567) April 2018 Version 2.0 Qualification at a glance Subject area City & Guilds number 6567 Age group approved
ELECTRIC VEHICLE MAINTENANCE STANDARDS SUPPLEMENTARY EVIDENCE
SUPPLEMENTARY EVIDENCE SUPPLEMENTARY EVIDENCE This supplement provides the Office for Low Emission Vehicles (OLEV) additional evidence in support of the IMI s recommendations for a mandatory competency
SEMEMI SQA Unit Code H2B0 04 Carrying out scheduled maintenance tasks on service systems and equipment
Carrying out scheduled maintenance tasks on service systems and Overview This unit identifies the competences you need to carry out scheduled maintenance tasks on service systems and, such as water distribution,
Centre for Rail Skills. National Occupational Standards. for the. Maintenance and Repair of. Traction and Rolling Stock
Centre for Rail Skills National Occupational Standards for the Maintenance and Repair of Traction and Rolling Stock March 2003 Introduction This document sets out the work done on the revised CFRS National
COMPANION VOLUME IMPLEMENTATION GUIDE FOR
COMPANION VOLUME IMPLEMENTATION GUIDE FOR UEE ELECTROTECHNOLOGY TRAINING PACKAGE Release 1.0 CONTENTS ABOUT AUSTRALIAN INDUSTRY STANDARDS... 1 OVERVIEW INFORMATION... 1 VERSION CONTROL AND MODIFICATION
SEMPMO209 - SQA Unit Code H04C 04 Producing products by assembly operations
Overview This unit covers the skills and knowledge you will need to carry out product assembly operations that bring together a number of components in a logical sequence to construct an assembly or sub-assembly.
Qualification and Assessment Specification
Qualification and Assessment Specification NOCN Level 2 NVQ Diploma in Heritage Conservation and Restoration of Britain s Canals and Waterways Qualification No: 601/5605/3 Operational Start Date: 1 st
NZQA registered unit standard version 1 Page 1 of 5. Diagnose and repair faulty electronic equipment to component level
Page 1 of 5 Title Diagnose and repair faulty electronic equipment to component level Level 4 Credits 40 Purpose This unit standard is intended for electronics technicians who are responsible for the diagnosis
Qualification and Assessment Specification
Qualification and Assessment Specification NOCN Level 6 NVQ Diploma in Construction Site Management (Construction) Qualification No: 603/0947/7 Operational Start Date: 1 st January 2017 Version 1.1 August
Level 1 & 2 NVQs for Performing Engineering Operations (2251)
Level 1 & 2 NVQs for Performing Engineering Operations (2251) Qualification Handbook Level 1-500/1473/0 Level 2-500/1474/2 Version 1.0 www.cityandguilds.com November 2006 About City & Guilds City & Guilds
SEMAUT3054 Modifying commercial and passenger carrying vehicles
Overview This standard identifies the competences you need to carry out modifications on commercial and passenger carrying vehicles, in accordance with approved procedures. The vehicle may have to be modified
Level 2 NVQ Diploma in Building Maintenance Multi-trade Repair and Refurbishment Operations (Construction) ( ) December 2015 Version 2.
QUALIFICATION HANDBOOK Level 2 NVQ Diploma in Building Maintenance Multi-trade Repair and Refurbishment Operations (Construction) (6562-22) December 2015 Version 2.0 Qualification at a glance Subject area
Higher National and Vocational Qualifications Internal Assessment Report 2015 Carpentry and Joinery
Higher National and Vocational Qualifications Internal Assessment Report 2015 Carpentry and Joinery The purpose of this report is to provide feedback to centres on verification in Higher National and Scottish
Monitor and Control the Recovery and Disposal of Meat Processing By-products
Unit Summary By-products from meat plants may have considerable economic value as foods for humans and animals, for medical accessories and for non-food use. The separation and recovery of usable by-products
NWP268B Monitor, operate and report on chlorine-based disinfection
NWP268B Monitor, operate and report on chlorine-based disinfection systems Unit descriptor This unit of competency describes the outcomes required to monitor and operate chlorine disinfection systems and
SEMFWE3-11 SQA Unit Code HF38 04 Preparing resistance spot, seam and projection welding machines for production
Preparing resistance spot, seam and projection welding machines for Overview This standard identifies the competencies you need to prepare a resistance spot, seam or projection welding installation for
Level 2 NVQ Diploma in Directional Drilling Operations (Construction)
(Construction) Qualification Specification ProQual 2016 Contents Page Introduction 3 Qualification profile 3 Qualification Structure 4 Centre requirements 7 Support for candidates 7 Links to National Standards
Level 2 NVQ Certificate in Wall and Floor Tiling (Construction) ( ) September 2017 Version 2.1
QUALIFICATION HANDBOOK Level 2 NVQ Certificate in Wall and Floor Tiling (Construction) (6560-02) September 2017 Version 2.1 Qualification at a glance Subject area City & Guilds number 6560 Age group approved
Level 2 Maintain ICT equipment and systems 2 ( / )
Level 2 Maintain ICT equipment and systems 2 (72667267-401/7540-228) e-quals Assignment guide for Candidates Assignment D www.cityandguilds.com/e-quals07 July 2009 Version 1.0 About City & Guilds City
CPCCCM2010A Work safely at heights
CPCCCM2010A Work safely at heights Release: 1 CPCCCM2010A Work safely at heights Modification History Not Applicable Unit Descriptor Unit descriptor This unit of competency specifies the outcomes required
IMIHV01 Carry out routine commercial vehicle maintenance
IMIHV01 Carry out routine commercial vehicle maintenance Overview This NOS is about conducting routine examination, adjustment and replacement activities as part of the periodic maintenance of commercial
Cskills Awards L2 NVQ Diploma in Controlling Lifting Operations - Slinger/Signaller (Construction) QUA801
Cskills Awards L2 NVQ Diploma in Controlling Lifting Operations - Slinger/Signaller (Construction) QUA801 Version QUA801/20100901/1 Published by Cskills Awards, Bircham Newton, King s Lynn, Norfolk PE31
Level 2 NVQ Certificate in Erection of Precast Concrete (Construction)
Level 2 NVQ Certificate in Erection of Precast Concrete (Construction) Qualification Specification ProQual 2016 Contents Introduction 3 Qualification profile 3 Qualification Structure 4 Pathway 1 Flooring
NVQ in Business-Improvement Techniques Qualifications Handbook Level Level Level
NVQ in Business-Improvement Techniques Qualifications Handbook Level 2 2257-50 Level 3 2257-51 Level 4 2257-52 www.cityandguilds.com.uk January 2008 2 City & Guilds is the UK s leading provider of vocational
Level 2 NVQ Diploma in Wood Occupations (Construction)
Qualification Specification ProQual 2015 Contents Page Introduction 3 The Qualifications and Credit Framework (QCF) 3 Qualification profile 4 Rules of combination 5 Centre requirements 8 Support for candidates
Level 3 Diploma in Electrical Power Engineering - Underground Cables ( )
Level 3 Diploma in Electrical Power Engineering - Underground Cables (2339-32) Accreditation number: 500/7324/2 Qualification Units www.cityandguilds.com August 2009 Version V1 0 Level 3 Engineering Technology
Regulated Qualifications Unit and Assessment Specification
Regulated Qualifications Unit and Assessment Specification Unit title Erecting and Dismantling Plant (Cranes and Rigs) in the Workplace Regulator unit L/616/7152 code SQA unit code HE5F 68 SSC Ref VR 404
Level 2 NVQ Diploma in Construction Operations and Civil Engineering Services - Construction Operations (Construction) (6574)
QUALIFICATION HANDBOOK Level 2 NVQ Diploma in Construction Operations and Civil Engineering Services - Construction Operations (Construction) (6574) September 2017 Version 2.2 Qualification at a glance
-SQA- SCOTTISH QUALIFICATIONS AUTHORITY NATIONAL CERTIFICATE MODULE: UNIT SPECIFICATION GENERAL INFORMATION. -Module Number Session
-SQA- SCOTTISH QUALIFICATIONS AUTHORITY NATIONAL CERTIFICATE MODULE: UNIT SPECIFICATION GENERAL INFORMATION -Module Number- 2211194 -Session-1994-95 -Superclass- TK -Title- PLANT OPERATIONS: PRODUCING
Qualification Unit Cskills Awards L2 NVQ Diploma in Specialist Occupations (Construction) - Door and Shutter Systems
Qualification Unit Cskills Awards L2 NVQ Diploma in Specialist Occupations (Construction) - Door and Shutter Systems (QRN ref: 601/1968/8) Unit CodeQCF643 Title: Moving, Handling and Storing Resources
National Certificate in Energy and Chemical Plant (Boiler Operation) (Level 2)
NZQF NQ Ref 1342 Version 2 Page 1 of 5 National Certificate in Energy and Chemical Plant (Boiler Operation) (Level 2) Level 2 Credits 42 This qualification has been reviewed. The last date to meet the
QUALIFICATION SPECIFICATION
QUALIFICATION SPECIFICATION Level 3 Diploma in Engineering Construction Maintenance (RQF) Contains the following pathways: - Electrical - Instrumentation and control - Mechanical QS-Engineering Construction
QUALIFICATION HANDBOOK
QUALIFICATION HANDBOOK Level 3 NVQ Extended Diploma in Engineering Technical Support (1786-70) September 2013 Version 1.0 Revised version for registrations from September 1 st 2013 Qualification at a glance
QUALIFICATION HANDBOOK
QUALIFICATION HANDBOOK Level 3 NVQ Diploma in Mechanical Engineering (Pipe Fitting and Assembly) (1712-34) August 2011 Version 1.0 Qualification at a glance Subject area City & Guilds number 1712 Age group
Release: 1. CPPSE C3026A Work effectively in investigative services
Release: 1 CPPSE C3026A Work effectively in investigative services CPPSE C3026A Work effectively in investigative services Modification History Not Applicable Unit Descriptor Unit descriptor This unit
QUALIFICATION HANDBOOK
QUALIFICATION HANDBOOK Level 3 NVQ Diploma in Aeronautical Engineering (Aircraft Surface Finishing) (1789-31) August 2011 Version 1.0 Qualification at a glance Subject area City & Guilds number 1789 Engineering
SUMMITSKILLS. Electrical Installation Domestic Plumbing & Heating Heating and Ventilating, Ductwork, Refrigeration and Air Conditioning
SUMMITSKILLS SummitSkills Consolidated Assessment Strategy for Scottish Vocational Qualifications and Other Competence Based Qualifications for the Building Engineering Services Sector in Scotland Electrical
Operate a root crop harvester
Page 1 of 5 Operate a root crop harvester Level 4 Credits 20 Purpose People credited with this unit standard are able to: select and prepare root crop harvesting equipment and machinery; carry out field
Maintenance Electrician
Maintenance Electrician External Vacancy Post Ref: 5919. Full Time, 37 hours per week. Permanent, 24,906.60-25,642.89 per annum. Sunderland College is seeking to recruit an experienced and highly motivated
Demonstrate the requirements for holding permits on high voltage electrical equipment
Page 1 of 6 Demonstrate the requirements for holding permits on high voltage electrical equipment Level 3 Credits 2 Purpose People credited with this unit standard are able to: describe the requirements