SYSTEM 25 SYSTEM 50 AL SYSTEM 63 SYSTEM 75 SYSTEM 100. Alsident System 50. Aluminium. Product Information
|
|
|
- Jared Robertson
- 5 years ago
- Views:
Transcription
1 Alsident System 50 Aluminium Product Information
2
3 System 50 - Aluminium - General Information Product Specification Product Description System 50 - Aluminium The System 50 Aluminium Extraction Arm from ALSIDENT SYSTEM features a wide range of jointed extraction arms made of anodized aluminium tubes with a diameter of 50 mm, joints of polypropylene and internal components of stainless steel. The joints make the arm easy to adjust and place in the working situation. System 50 Extraction Arms are available in three models for mounting on table, wall or on ceiling. A wide range of hood designs allows this arm to cover various needs. An extraction arm from ALSIDENT SYSTEM consists of three parts: An extraction arm, a hood and a bracket. Each part must be ordered separately. The aluminium version of the System 50 is suited for use in nonaggressive areas e.g. schools, hairdressers, electronics industries and dentists. Available in various lengths with a maximum horizontal range of mm. Special length arms are available on request. GI 01
4 System 50 - Aluminium - General Information Product Specification Technical Specifications Recommended Airflow: Normal: 65 m 3 /h Minimum: 45 m 3 /h Maximum: 85 m 3 /h Air Temperature: Key to the Signatures SYSTEM NO. 50 VERSION AL -15 C C Material: Pipes: Anodized Aluminium Joints: Polypropylene (PP) - red, white or black O-ring: Polyethylene (PE) Mounting flanges: Polypropylene (PP) - red, white or black Damper: Polyethylene (PE) Thumbscrew: Polypropylene (PP) - black Threaded stay: Stainless Steel Spring: Stainless Steel Aluminium CHAPTER GI TM WM CM General Information Table Mounted Wall Mounted Ceiling Mounted PAGE NO. 01 GI 02
5 System 50 - Aluminium - General Information Product Overview Table Mounted Table mounted, 2-Joint Diam. L B C Indicative Part No. Colour of joint [mm] [mm] [mm] [mm] Weight [kg] Red White Black Table mounted, 3-Joint Diam. L A B C Indicative Part No. Colour of joint [mm] [mm] [mm] [mm] [mm] Weight [kg] Red White Black GI 03
6 System 50 - Aluminium - General Information Product Overview Wall Mounted Wall mounted, 2-Joint Diam. L B C Indicative Part No. Colour of joint [mm] [mm] [mm] [mm] Weight [kg] Red White Black Wall mounted, 3-Joint Diam. L A B C Indicative Part No. Colour of joint [mm] [mm] [mm] [mm] [mm] Weight [kg] Red White Black GI 04
7 System 50 - Aluminium - General Information Product Overview Ceiling Mounted Ceiling Mounted, 3-Joint Diam. L A B C Indicative Part No. Colour of joint [mm] [mm] [mm] [mm] [mm] Weight [kg] Red White Black GI 05
8 System 50 - Aluminium - General Information Accessories Overview Hoods - Extractor Tubes Suction Nozzle Part Nos.: /-5 Made of anodized aluminium and white or red polypropylene (PP). Recommended for concentrated sources of pollution. Often used at soldering processes. Material Hood: Aluminium (Anodized) and Polypropylene (PP) Flange: Polypropylene (PP) Connection tube: Aluminium (Anodized) Part No. Red White Extractor Tube - Aluminium Part Nos.: and Recommended for small concentrated sources of pollution. Efficient as it gets close to the source without obstructing the work process. Material Tube: Aluminium (Anodized) Length Part No. 210 mm mm Extractor Tube - Polypropylene Part Nos.: and Recommended for small concentrated sources of pollution. Efficient as it gets close to the source without obstructing the work process. Material Tube: Aluminium (Anodized) Tip: Polypropylene (PP) Length Part No. Red White 210 mm mm GI 06
9 System 50 - Aluminium - General Information Accessories Overview Hoods - Extractor Tubes Metal Hood (diam. 200 mm) Part Nos.: /-5 Metal hood made of white or red powder coated aluminium. Recommended when extracting hot gases, fumes, light dust concentrations etc. Material Metal hood: Aluminium (powder coated) Flange: Polypropylene (PP) Connection tube*: Aluminium (Anodized) *) Separately enclosed at delivery. Part No. Red White Dome Hood (diam. 280 mm) Part Nos.: /-5 /-050 Recommended for light fumes, gases and small open vessels. The transparent hood assists in keeping a good view of the workpiece. Material Hood: PETG Flange: Polypropylene (PP) Connection tube*: Aluminium (Anodized) *) Separately enclosed at delivery. Part No. Red White Black Dome Hood (diam. 385 mm) Part Nos.: /-5 /-050 Recommended for light fumes, gases and small open vessels. The transparent hood assists in keeping a good view of the workpiece. Material Hood: PETG Flange: Polypropylene (PP) Connection tube*: Aluminium (Anodized) *) Separately enclosed at delivery. Part No. Red White Black GI 07
10 System 50 - Aluminium - General Information Accessories Overview Hoods - Extractor Tubes Square Hood Part Nos.: /-5 /-050 Recommended for light fumes, gases and small open vessels. The transparent hood assists in keeping a good view of the workpiece. Good efficiency when placed vertically on a surface e.g. a table. Material Hood: PETG Flange: Polypropylene (PP) Connection tube*: Aluminium (Anodized) *) Separately enclosed at delivery. Part No. Red White Black Square Hood Part Nos.: /-5 /-050 Recommended for both light and heavy fumes, gases and for open vessels. Suited for both horizontal an vertical placement. Good efficiency when placed vertically on a surface e.g. a table. Material Hood: PETG Flange: Polypropylene (PP) Connection tube*: Aluminium (Anodized) *) Separately enclosed at delivery. Part No. Red White Black Flat Screen Part Nos.: /-5 /-050 Recommended when extracting heavy gases and fumes. High efficiency when placed vertically on a surface e.g. a table. Gets close to the source without obstructing the work process. Material Hood: PETG Flange: Polypropylene (PP) Connection tube*: Aluminium (Anodized) *) Separately enclosed at delivery. Part No. Red White Black GI 08
11 System 50 - Aluminium - General Information Accessories Overview Brackets and Columns Wall Bracket Part Nos.: /-050 Used for System 50 Wall Mounted Extraction Arms. The wall bracket is made of white or black powder coated steel. Other colours available on request. Material Part No. White powder coated Black powder coated Table Bracket Part Nos.: /-050 Used to mount System 50 Table Mounted Extraction Arms on table side which makes it removable for mobile installations. Made of white or black powder coated steel. Other colours available on request. Material Part No. White powder coated Black powder coated Reducers Part Nos.: and Used to connect System 50 Extraction Arms to ducting. Made of white or black Polypropylene (PP). Available in two sizes. Reducing from/to [mm] White Black 63/ / GI 09
12 System 50 - Aluminium - General Information Accessories Overview Brackets and Columns Ceiling Columns Used for mounting the System 50 Ceiling Mounted Extraction Arms. The ceiling column is made of white or black powder coated steel. Available in two models with side connection or top connection to duct. Standard lengths see below. Available in other lengths and colours on request. Side Connection Diameter: 80 mm. Top connection, Part. No.:... Length [mm] Ind. Weight [kg] White Black Side connection, Part. No.:... Extensions for Ceiling Column Mounted on ceiling. Used to extend Ceiling Column in rooms with high ceilings. The Extension is made of white powder coated steel. Available in two standard lengths with side or top connection for duct. Other lengths and colours available on request. Side Connection Diameter: 80 mm. Length [mm] Ind. Weight [kg] White Black 250* *) for socket pipe with hole Length [mm] Ind.Weight [kg] Top connect. Side connect GI 10
13 System 50 - Aluminium - General Information Technical Description A B Pressure Drop Chart System 50, Table mounted System 50, Wall and Ceiling mounted A B GI 11
14 System 50 - Aluminium - General Information Spare Parts List Joint with Damper Joint with Damper /-5 /-050 Pos. Product No. Pos. Part No. Red White Black Description A Joint, 12 mm Joint, 5 mm O-ring Teflon Washer Thumbscrew, 5 mm Threaded Stay Thumbscrew, 4 mm Wing for damper Damper Seegerring 1 A / -5 / [pieces applied] GI 12
15 System 50 - Aluminium - Table Mounted Working Area Table mounted with Extraction Tube Note: Working area of the arm is defined from the center of the opening of the accessory. When choosing the arm we recommend that the stationary working position of the accessory is not placed in the highest or lowest part of the working area. (All measurements in mm) TM 01
16 System 50 - Aluminium - Table Mounted Mounting Options Table Mounted Option Dimensions (All measurements in mm) Directly on table. Socket pipe of a System 50 Extraction Arm mounted directly on a table with flange screwed to table plate. Accessories: No brackets used. TM 02
17 System 50 - Aluminium - Table Mounted Mounting Options Table Mounted Option with Table Bracket Dimensions (All measurements in mm) With table bracket. Socket pipe of a System 50 Extraction Arm mounted on table side with a table bracket. Very functional option when impossible to mount directly on table or when a mobile installation is required. Accessories: Table Bracket, Part No. : /-050 TM 03
18 System 50 - Aluminium - Table Mounted Table Bracket Technical Description Part No.: /-050 Dimensions (All measurements in mm) Used to mount System 50 Table Mounted Arms on table side. Removable for mobile installations. Made of white or black powder coated steel. Other colours available on request. Material Part No. White powder coated Black powder coated TM 04
19 System 50 - Aluminium - Table Mounted Spare Parts (A) (B) (C) (D) (E) (F) (G) (H) For spare parts list - see next page TM 05
20 System 50 - Aluminium - Table Mounted Spare Parts List Pos. Product No. Red White Black Joints A B C D E F G H joint joint joint joint joint joint joint joint Pos. Part No. Description A B C D E F G H /-5 /-050 C-pipe BM Spring BM 3 mm (2-jnts) Spring BM 3 mm Spring BM 4 mm Spring BM 5 mm O-ring /-5 /-050 B-pipe 375 (2 jnts) /-5 /-050 B-pipe 475 (2 jnts) /-5 /-050 B-pipe 575 (2 jnts) /-5 /-050 B-pipe /-5 /-050 B-pipe /-5 /-050 B-pipe Threaded Stay Thumbscrew Washer /-5 /-050 A-pipe /-5 /-050 A-pipe /-5 /-050 A-pipe /-5 /-050 A-pipe Joint with damper* /-5 /-050 Joint B *) Spare Parts List for Joint with Damper - see General Information. When ordering spare parts please quote: Product No. eg.: (white) Description - B-pipe 375 Spare Part No Quantity - 1 pc. [pieces applied] If you wish to customize the arm with a spare part which is not a constituent part of the particular model, please contact your Alsident dealer. TM 06
21 System 50 - Aluminium - Table Mounted Mounting Instruction TM 07
22 System 50 - Aluminium - Wall Mounted Working Area Wall Mounted with Extraction Tube Note: Working area of the arm is defined from the center of the opening of the accessory. When choosing the arm we recommend that the stationary working position of the accessory is not placed in the highest or lowest part of the working area. (All measurements in mm) WM 01
23 System 50 - Aluminium - Wall Mounted Mounting Options Wall Mounted Option Dimensions (All measurements in mm) Wall Mounted A System 50 Extraction Arm Wall Mounted with wall bracket. Accessories: Wall Bracket, Part No.: /-050 WM 02
24 System 50 - Aluminium - Wall Mounted Wall Bracket Technical Description Part No.: /-050 Dimensions (All measurements in mm) Used for System 50 Wall or Table Mounted Extraction Arms. The wall bracket is made of white or black powder coated steel. Other colours available on request. Material Part No. White powder coated Black powder coated WM 03
25 System 50 - Aluminium - Wall Mounted Spare Parts (A) (B) (C) (D) (E) (F) (G) (H) (I) (J) For spare parts list - see next page WM 04
26 System 50 - Aluminium - Wall Mounted Spare Parts List Pos. Product No. Red White Black Joints A B C D E F G H I J joint joint joint joint joint joint joint joint joint joint [pieces applied] Pos. Part No. Description A B C D E F G H I J /-5 /-050 C-pipe HM Spring HM/HMS 3mm (2-jnts) Spring HM/HMS 4mm (2-jnts) Spring HM/HMS 3mm ,5-03 Spring HM/HMS 4.5mm Spring HM/HMS 5 mm O-ring /-5 /-050 B-pipe 375 (2- jnts) /-5 /-050 B-pipe 475 (2 -jnts) /-5 /-050 B-pipe 575 (2 -jnts) /-5 /-050 B-pipe /-5 /-050 B-pipe /-5 /-050 B-pipe /-5 /-050 B-pipe /-5 /-050 B-pipe Threaded Stay Thumbscrew Washer /-5 /-050 A-pipe /-5 /-050 A-pipe /-5 /-050 A-pipe /-5 /-050 A-pipe Joint with damper* *) Spare Parts List for Joint with Damper - see General Information. When ordering spare parts please quote: Product No. eg.: (red) Description - B-pipe 375 Spare Part No Quantity - 1 pc. [pieces applied] If you wish to customize the arm with a spare part which is not a constituent part of the particular model, please contact your Alsident dealer. WM 05
27 System 50 - Aluminium - Wall Mounted Mounting Instruction WM 06
28 System 50 - Aluminium - Ceiling Mounted Working Area Ceiling mounted with Extraction Tube Note: Working area of the arm is defined from the center of the opening of the accessory. When choosing the arm we recommend that the stationary working position of the accessory is not placed in the highest or lowest part of the working area. (All measurements in mm) CM 01
29 System 50 - Aluminium - Ceiling Mounted Mounting Options Ceiling Mounted Option Dimensions (All measurements in mm) A System 50 Extraction Arm ceiling mounted with a ceiling column. Connection for ducting at the side or top. Accessories: Ceiling Column, Part No. depending on lengths. CM 02
30 System 50 - Aluminium - Ceiling Mounted Ceiling Column Technical Description Ceiling Columns Used for mounting the System 50 Ceiling Mounted Extraction Arms. The ceiling column is made of white or black powder coated steel. Available in two models with side connection or top connection to duct. For standard lengths see below. Available in other lengths and colours on request. Top connection, Part. No.: Length [mm] Ind. Weight [kg] White Black Side connection, Part. No.: Length [mm] Ind. Weight [kg] White Black 250* *) for socket pipe with hole. Please contact your Alsident dealer. Dimensions (All measurements in mm) CM 03
31 System 50 - Aluminium - Ceiling Mounted Ceiling Column Extensions for Ceiling Column Mounted on ceiling. Used to extend Ceiling Column in rooms with high ceilings. The Extension is made of white powder coated steel. Available in two standard lengths with side or top connection for duct. Other lengths and colours available on request. Side Connection Diameter: 80 mm. Length [mm] Ind.Weight [kg] Top connect. Side connect Dimensions (All measurements in mm) CM 04
32 System 50 - Aluminium - Ceiling Mounted Spare Parts 3-Joint For spare parts list - see next page. CM 05
33 System 50 - Aluminium - Ceiling Mounted Spare Parts List Pos. Product No. Red White Black Joints A B C D E F joint joint joint joint joint joint Pos. Part No. Description A B C D E F /-5 /-050 C-pipe HMS Spring HM/HMS 3mm ,5-03 Spring HM/HMS 4.5mm Spring HM/HMS 5 mm O-ring /-5 /-050 B-pipe /-5 /-050 B-pipe /-5 /-050 B-pipe /-5 /-050 B-pipe /-5 /-050 B-pipe Threaded Stay Thumb Screw Washer /-5 /-050 A-pipe /-5 /-050 A-pipe /-5 /-050 A-pipe /-5 /-050 A-pipe Joint with damper* *) Spare Parts List for Joint with Damper - see General Information. When ordering spare parts please quote: Product No. eg.: (white) Description - B-pipe 275 Spare Part No Quantity - 1 pc. [pieces applied] If you wish to customize the arm with a spare part which is not a constituent part of the particular model, please contact your Alsident dealer. CM 06
34 System 50 - Aluminium - Ceiling Mounted Mounting Instruction CM 07
SYSTEM 25 SYSTEM 50 SYSTEM 63 SYSTEM 75 AL SYSTEM 100. Alsident System 75. Aluminium. Product Information
Alsident System 75 Aluminium Product Information System 75 - Aluminium - General Information Product Specification Product Description System 75 - Aluminium The System 75 Aluminium Extraction Arm from
Modulating liquid level regulators direct operated, for low pressure side types SV 4, 5 and 6 REFRIGERATION AND AIR CONDITIONING.
Modulating liquid level regulators direct operated, for low pressure side types SV 4, 5 and 6 REFRIGERATION AND AIR CONDITIONING Technical leaflet Contents Page Introduction.......................................................................................
Float valves Types SV 4, SV 5 and SV 6
Data sheet Float valves Types SV 4, SV 5 and SV 6 SV 4-6 are for use on the low pressure side as modulating liquid level regulators in refrigeration, freezing and air conditioning systems with ammonia
EIV. Circular single deflection grille for walls. Quick facts. Quick guide EIV A I R F L O W - S O U N D L E V E L
Circular single deflection grille for walls Quick facts Can be used with multi-function commissioning box Adjustable deflectors Simple installation Cleanable Available in alternative colours upon special
ALS 25 db(a) 30 db(a) 35 db(a) Size
Circular single deflection grille for walls QUICK FACTS Can be used with multi-function commissioning box Adjustable deflectors Simple installation Cleanable Standard colour White RAL 9003 -- 5 alternative
With uncoated stainless steel rope electrode and coated dynamic anchorage for level measurement of bulk-solid materials in higher silos.
průmyslová elektronika Capacitive level meters CLM 36 For continuous level measurement of liquid and bulk-solid materials Direct mounting into containers, silos, vessels, basins, reservoirs, etc Easy and
Standard Bourdon tube pressure gauges EN 837-1
Standard Bourdon tube pressure gauges EN 837-1 Application For gaseous and liquid media which are not highly viscous, do not crystallize and do not attack copper alloys.! When measuring gas or vapour,
CONDUCTIVE AND NON CONDUCTIVE ADJUSTABLE PCB CARRIERS
PCB CARRIERS CONDUCTIVE AND NON CONDUCTIVE ADJUSTABLE PCB CARRIERS ALKON adjustable PCB Carriers can be used for protection of boards during storage or transport in assembly line or integrate with automatic
CANTILEVER IPE
IPE 90-120 RAL 3000 Columns RAL 1004 Shelves Galvanized crosses and accessories Freestanding shelving particularly suitable for the storage of long materials such as pipes, bars, sections, sheets in packs,
CONDUCTIVE AND NON CONDUCTIVE ADJUSTABLE PCB CARRIERS
PCB CARRIERS CONDUCTIVE AND NON CONDUCTIVE ADJUSTABLE PCB CARRIERS Non Conductive Adjustable PCB Carrier NO.5 Conductive Adjustable PCB Carrier NO. 5 ALKON adjustable PCB Carriers can be used for protection
NORTHWESTERN UNIVERSITY PROJECT NAME JOB # ISSUED: 03/29/2017
SECTION 22 1423 - STORM DRAINAGE PIPING SPECIALTIES PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division
SECTION HANGERS AND SUPPORTS FOR PLUMBING
SECTION 22 05 29 HANGERS AND SUPPORTS FOR PLUMBING PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division
UFR+L FILTER REGULATOR + LUBRICATOR
FEATURES The UFR+L filter regulator + lubricator is intended for the treatment of compressed air or compressed gas. Its function is that of supplying filtered, lubricated air at the desired pressure for
Pulsar. The panels feature a very interesting construction: modern welding units, Radiant Panels
Pulsar Radiant Panels The PULSAR Sabiana ceiling mounted radiant panels are produced in 4 sizes, with a width of 600 mm and a length between 1.2 and 3 m, in 2 standard colours, and others upon request.
Z5554 Mounting instructions 1.1 en
Z Z5554 Mounting instructions 1.1 en General information Z5554 Mounting instructions Version: 1.1 en, 10/2016, D2627.EN.01 Copyright 2016 by d&b audiotechnik GmbH; all rights reserved. Keep these mountings
Free-standing rail systems, adjustable. Item no:
Free-standing rail systems, adjustable Item no: 553000 1.00......... Purpose and use.............................................. 3 1.01......... Manufacturer..................................................
Adjustable Suspension Hanger Technical Datasheet
Adjustable Suspension Hanger sheet The Adjustable Suspension Hangers Clip are a component of the Keylock Ceiling System. The upper vertical side of the hanger allows the Suspension Rod that goes through
Z5410/12 Mounting instructions 1.1 en
Z Z5410/12 Mounting instructions 1.1 en General information Z5410/12 Mounting instructions Version: 1.1 en, /, D2961.EN.01 Copyright by d&b audiotechnik GmbH; all rights reserved. Keep these mountings
(G) DOORS & WINDOWS LIST OF BUREAW OF INDIAN STANDARD CODE OF PRACTICE (ISI)
(G) DOORS & WINDOWS LIST OF BUREAW OF INDIAN STANDARD CODE OF PRACTICE (ISI) 4021 : Specification for teak wood. 287 : Recommendation for maximum permissible moisture content 1141 : Specification for code
Extraction arms. The most effective way to remove welding fumes
Extraction arms The most effective way to remove welding fumes Multiple arm system with KUA metal tube extraction arms and FlexMax extension cranes Do you protect your welders? We do. Plymovent products
Flue gas systems for oil and gas condensing boilers. Flue gas kit DN60 rigid in the duct. Accessories DN60 (additionally available to gas flue kit)
Flue gas kit DN60 rigid in the duct 100193 Flue gas kit No Outlet set plastic 1 x Set 100193 39.10 (Quantities in the image differ from the set) 1003253 1001938 Spacer set * ( pieces) Top inspection opening
SLIP RESISTANT INTELOK SERRATED CHANNEL
Cable Ladder Cable Tray Steel Framing THE INTELOK FRAMING SYSTEM IS A STRONG, Mounting Frame Supports SLIP RESISTANT INTELOK SERRATED CHANNEL EASY TO ERECT SUPPORT SYSTEM, IDEAL FOR Rapid Installation
Ecoline Façade luminaires with LEDs and for T16 fluorescent lamps
Ecoline Façade luminaires with s and for T fluorescent lamps Ecoline is a linear wall washer luminaire with s or for T fluorescent lamps and comes in various different lengths. In addition to stand alone
CHAPTER 4 PIPES. Prof. Dr. Uğur Atikol
CHAPTER 4 PIPES Prof. Dr. Uğur Atikol History Materials: Lead used to be very popular material due to its availability, durability and ease of working. It had environmental problems Industrial developments
CLM-36 MISURATORI CAPACITIVI IN CONTINUO CONTROLLI DI LIVELLO. Capacitive level meters CLM 36. Features of variants. Accessories
CLM-36 MISURATORI CAPACITIVI IN CONTINUO CONTROLLI DI LIVELLO Capacitive level meters CLM 36 Capacitive level meters Riels CLM are designed for continuous level measurement of liquids, powders and bulk-solid
Connectors. Multi-purpose connecting clamps. Stainless steel cross connectors
Connectors Multi-purpose connecting clamps Thread in lower part With mushroom head bolt and protection against twisting Art. No. Design Pack / Weight 100147 Galvanised steel, 2-part, round/round 100149
HANGERS AND SUPPORTS FOR HVAC PIPING AND EQUIPMENT SECTION HANGERS AND SUPPORTS FOR HVAC PIPING AND EQUIPMENT
13686.00 HANGERS AND SUPPORTS FOR HVAC PIPING AND EQUIPMENT 230529-1 SECTION 230529 - HANGERS AND SUPPORTS FOR HVAC PIPING AND EQUIPMENT 1.1 SUMMARY A. Section Includes: 1. Metal pipe hangers and supports.
DPG. Low velocity terminal for small airflows QUICK FACTS
Low velocity terminal for small airflows QUICK FACTS Theatre diffuser for mounting in floor Fixed spread pattern Simple installation Requires no maintenance Cleanable Is available as special order in alternative
STEAM GENERATOR GV ETNA V/50HZ LAVOR PRO
STEAM GENERATOR GV ETNA 4000 220-240V/50HZ LAVOR PRO Content filters: validity This page is intentionally left blank. 8.451.0101 - STEAM GENERATOR GV ETNA 4000 220-240V/50HZ LAVOR PRO...4 R52110068-1 -
SECTION HANGERS AND SUPPORTS FOR PLUMBING PIPING AND EQUIPMENT
Page 220529-1 SECTION 220529 - PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification Sections,
Project: Type: Qty: Optics. Series. Reflector Mounting Lamping Finish Voltage Options BLC - S BLC-L 21 1 /4" 36 1 /4" 3 1 /2" O.D.
Project: Type: Qty: Series Optics Mounting Lamping Finish Voltage Options Pole Series Finish Pole Options Series Optics Mounting Lamping Finish Voltage Options BLC Beta Lantern L S Flat Glass Lens Sagged
Safety Ladders: Made of Aluminium
Y-Spar Anodized aluminium alloy ladder. Guide-rail profile: 52 x 51 mm. Comes with joint plate. Mounting brackets extra to order. Mounting distance: recommended 1400 mm - max. 1680 mm. Installation of
CDH/CLH. CleanZone Ceiling diffuser with micro-filter for supply air in clean rooms QUICK FACTS
CleanZone Ceiling diffuser with micro-filter for supply air in clean rooms QUICK FACTS Rectangular or circular duct connection Equipped with micro-filter H14 with gel or dry seal Painted interior Measurement
Temperature sensors for automotive applications
Temperature sensors for automotive applications When the precise measurement of temperature is a critical aspect to the safety of a process, the importance of precision quality thermocouple material is
STRUT METAL FRAMING SYSTEMS
STRUT METAL FRAMING SYSTEMS CONTENTS STRUT CHANNELS 2 FLAT PLATE FITTINGS 4 ANGLE FITTINGS 6 Z & U FITTINGS 8 BEAM CLAMPS 9 BASE POSTS 11 CANTILEVERS 13 I-BEAM SUPPORTS 15 PROPERTIES OF SECTION PROFILES
Visual Performance Series Square Adapters w/ Grilles
Visual Performance Series Square Adapters w/ Grilles Visual Performance VP8SQ VP8SQ 93031 PAIR VP8SQ Bulk Pack 93034 5 PAIR Visual Performance VP6SQ VP6SQ 93030 QUANTITY PAIR VP6SQ Bulk Pack 93033 5 PAIR
Ion Collector Kits for Manual Guns (Versa-Spray and Versa-Spray II)
Instruction Sheet P/N Ion Collector Kits for Manual Guns (Versa-Spray and Versa-Spray II) 1. Description This instruction sheet covers the ion collector kits for Versa-Spray and Versa-Spray II manual guns.
CAPACITIVE LEVEL METERS CLM 36
CAPACITIVE LEVEL METERS CLM 36 For continuous level measurement of liquid and bulk-solid materials Direct mounting into containers, silos, vessels, basins, reservoirs, etc Easy and quick connecting by
SECTION ORNAMENTAL ALUMINUM RAILING
SECTION 05730 ORNAMENTAL ALUMINUM RAILING PART 1 GENERAL 1.1 SECTION INCLUDES A. Decorative Wire Rope Railing 1.2 RELATED SECTIONS A. Section 03300 Cast-In-Place Concrete: Placement of sleeves cast in
Phone: +49 (0) 231 / Fax: +49 (0) 231 / Spring hinges. Art.: 6164 Art.
hinges Art.: 6062 Art.: 6063 Art.: 6064 Art.: 6065 Art.: 6066 Art.: 6067 Art.: 6068 Art.: 6164 Art.: 6165 Art.: 6166 Art.: 6105 Art.: 6169 Art.: 6167 Art.: 6486 Art.: 6088 Art.: 6872 Art.: 6876 F-41 hinges
Examples Page 43 of 45
UHDE-STANDARD Welding UN WELDED JOINTS V416-01 for vessels and equipment Part 2 (M) Examples Page 43 of 45 Item Figure Application Requirements Notes Small pad type flanges of austenitic steel, clad vessel
NEW. FR90 fire dampers. Maintenance-free
NEW Maintenance-free FR90 fire dampers in short lengths for installation in rigid walls and ceilings and in metal stud walls Sizes: DN mm to DN 315 mm Fire classification: EI /60/90/120 (ve - ho, i o)
COMPLEtE. COMPLEtE. STUD WELDING Products. STUD WELDING Products. Insulation Pins. section 6. Service Knowledge Integrity
Products Service Knowledge Integrity section 6 Insulation Pins FOR INQUIRIES, TO PACE ORDERS, SERVICE AND TECHNICA SUPPORT CONTACT ANY OF THE FOOWING: OFFICE: 216.904.4008 EMAI: SAES@COMPETESTUDWED.COM
Materials Carbon Steel is used in the manufacturing of riser and pipe clamps. Stainless Steel and other materials are available.
Pipe clamps offered in this section are designed for support and attachment of pipe to structural members. wide range of pipe clamps are available for various applications. Materials arbon Steel is used
EMPIRE ANVIL PHD BLINE 11 11B Plain Carbon Steel (1/2 24 ) 260 450 B3100 11G ElectroGalvanized (1/2 24 ) 11SS T304 Stainless (1/2 12 ) Adjustable Clevis 11GI 11GI ElectroGalvanized (1/2 12 ) 260 450 B3100
150 x 150 DN110. HL Products. Accessories
150 x 150 65 92 HL Products Accessories www.hutterer-lechner.com HL Fire protection in case of fire This assembly prevents the spread of fire to another floor. Intumescent material in the metal housing
WHAT IS CANTILEVER RACK?
PRODUCT INFORMATION WHAT IS CANTILEVER RACK? 2946 Larimer St. Denver, CO 80205 303-295-1100 / 800-373-7693 FAX 303-295-2464 Email info@snyderequipment.com www.snyderequipment.com MODERN EQUIPMENT COMPANY,
Protective Capony RTC-16
Protective Capony RTC-16 ASSEMBLY AND OPERATION MANUAL Protective Canopy RTC-16 Assembly and Operation Manual CONTENT: 1 APPLICATION...3 2 OPERATION CONDITIONS...3 3 TECHNICAL SPECIFICATIONS...3 4 DELIVERY
Resistance Temperature Detectors Mineral Insulated Thermocouples Thermoelements, Accessories and Service All-round supplier
Resistance Temperature Detectors Mineral Insulated Thermocouples Thermoelements, Accessories and Service All-round supplier of temperature sensors and component parts for all industrial applications Manufactured
Ø mm. SYSTEM KAN-therm. High quality for reasonable price TECHNOLOGY OF SUCCESS ISO 9001
Ø 16 110 mm SYSTEM KAN-therm PP High quality for reasonable price TECHNOLOGY OF SUCCESS Contents 3 System KAN-therm PP The material... 94 Sanitary systems installation... 95 Pipes... 95 Thermal elongation...
Thermocouples Straight Design Model TC501, for Flue Gas Measurement
Electrical Temperature Measurement Thermocouples Straight Design Model TC501, for Flue Gas Measurement WIKA Data Sheet TE 65.30 Applications T Blast furnaces, air heaters T Red-heat and heat treatment
DRAINS AND CLEANOUTS. 1. Division 7 - Thermal and Moisture Protection Piping (Plumbing).
SECTION 15421 DRAINS AND CLEANOUTS PART 1 GENERAL 1.01 SUMMARY A. Related Sections: 1. Division 7 - Thermal and Moisture Protection. 2. 15410 - Piping (Plumbing). 1.02 SUBMITTALS A. Product Data: Submit
DRAINS AND CLEANOUTS. 1. Division 7 - Thermal and Moisture Protection Piping (Plumbing).
SECTION 15421 DRAINS AND CLEANOUTS PART 1 GENERAL 1.01 SUMMARY A. Related Sections: 1. Division 7 - Thermal and Moisture Protection. 2. 15410 - Piping (Plumbing). 1.02 SUBMITTALS A. Product Data: Submit
September 6, 2016 Page 1 of 5
September 6, 2016 Page 1 of 5 1. SECTION 16100 Drawing E4.3, Note #39: Reference to the radio fire alarm panel and the fire station alerting master panel does not relate to the building fire alarm system.
SECTION HANGERS AND SUPPORTS FOR ELECTRICAL SYSTEMS
SECTION 26 05 29 HANGERS AND SUPPORTS FOR ELECTRICAL SYSTEMS PART 1 GENERAL 1.1 DESCRIPTION A. Scope: 1. CONTRACTOR shall provide all labor, materials, equipment, and incidentals as shown, specified, and
MASTERSPEC TECHNICAL SPECIFICATIONS DIVISION 22 PLUMBING. A. This Section includes the following storm drainage piping specialties:
SECTION 221423 - STORM DRAINAGE PIPING SPECIALTIES PART 1 - GENERAL 1.1 SUMMARY A. This Section includes the following storm drainage piping specialties: 1. Backwater valves. 2. Cleanouts. 3. Roof drains.
All panels can be supplied in a range of styles, to suit the applications pictured below.
Evolution Radiant panel system LPHW up to 90 C Suspended ceiling grid or soffit mounting Vertical wall surface mounting Standard widths 150mm to 900mm 1 Description Introduction Evolution by Dunham-Bush
Stainless steel. 1.6 Stainless steel IP 69 K. Premium Panel, protection category IP 69K
T Premium Panel, protection category IP 69K IP 69 K.6 H H H Optionally with or without keyboard housing Resistant to high-pressure cleaning (protection category IP 69K). The seal lies between two surfaces
SECTION HANGERS AND SUPPORTS FOR PLUMBING PIPING AND EQUIPMENT
SECTION 220529 - HANGERS AND SUPPORTS FOR PLUMBING PIPING AND EQUIPMENT PART 1 - GENERAL 1.1 DESCRIPTION A. The General Conditions, Special Conditions and Division 1 through Division 22 as set forth in
Suffix for Disc Material Size A B C I.D. O.D. B.C. Holes Black White
Wet-R-Dri Valve A TA STYLE LIGHTWEIGHT COMPACT VERSATILE B I.D. Size Standard Model Detent Model Standard Material Max. Working Body Disc Pressure WD00 AL B. WD0 AL B. Aluminum WD00 GI B. WD0 GI B. Grey
Do you control welding fume?
Do you control welding fume? CUSTOMISED VENTILATION AND FILTRATION SOLUTIONS EVER WONDER ABOUT THE VALUE OF CLEAN AIR? We do. For more than 30 years we have made it our business to ensure clean air in
EMPIRE ANVIL PHD BLINE 11 11B Plain Carbon Steel (1/2 14 ) 260 450 B3100 11G ElectroGalvanized (1/2 24 ) 11SS T304 Stainless (1/2 12 ) Adjustable Clevis 11GI 11GI ElectroGalvanized (1/2 12 ) 260 450 B3100
M21Si ISO and M21Vi ISO Reduced Bore Ball Valves DN15 to DN150 Flanged PN40
Local regulations may restrict the use of this product to below the conditions quoted. In the interests of development and improvement of the product, we reserve the right to change the specification without
Industrial flue gas probes. Instruction manual
Industrial flue gas probes Instruction manual 2 1 Contents 1 Contents 1 Contents... 3 2 Safety and the environment... 4 2.1. About this document... 4 2.2. Ensure safety... 4 2.3. Protecting the environment...
SECTION DRAINS AND CLEANOUTS. 1. Division 7 - Thermal and Moisture Protection Piping (Plumbing).
SECTION 15421 DRAINS AND CLEANOUTS PART 1 GENERAL 1.01 SUMMARY A. Related Sections: 1. Division 7 - Thermal and Moisture Protection. 2. 15410 - Piping (Plumbing). 1.02 SUBMITTALS A. Product Data: Submit
CCDA1425 Speed Dome Camera Accessories
CCDA1425 Speed Dome Camera Accessories CCDA1425 SPEED DOME ACCESSORIES Indoor ceiling surface mount Indoor flush ceiling mount Weatherproof outdoor housing Wall mount Wall mount with junction box Pendant
C. Concrete Inertia Bases: Drawings showing required concrete steel reinforcing, construction details, and dimensions.
15240 VIBRATION ISOLATION ************************************************************************************************************* SPECIFIER: CSI MasterFormat 2004 number: 230548 An optional keynote
PRODUCTS AND SYSTEMS FOR ELECTRICAL AND DIGITAL BUILDING INFRASTRUCTURES
04 05 PRODUCTS AND SYSTEMS FOR ELECTRICAL AND DIGITAL BUILDING INFRASTRUCTURES Over floor trunking 0 300 9 0 300 93 0 38 00 Conform to standard EN 50085-- For creating a link between trunking, column,
INSTRUCTIONS FOR THE ASSEMBLY AND INSTALLATION OF THE VORTOX LIQUID SAMPLER
INSTRUCTIONS FOR THE ASSEMBLY AND INSTALLATION OF THE VORTOX LIQUID SAMPLER I. SAMPLER SUSPENDED BY CABLE The Vortox Liquid Sampler is a precision instrument manufactured of stainless steel, easy to install,
SECTION DUCTS PART 1 GENERAL 1.01 SUMMARY
1 1 1 1 1 1 1 1 0 1 0 1 SECTION 1 DUCTS PART 1 GENERAL 1.01 SUMMARY A. Section Includes: 1. Duct Materials.. Insulated flexible ducts.. Single wall spiral round ducts.. Ductwork fabrication.. Duct cleaning.
Tel : , Fax : P.O Box No , Dubai Investment Park 1 Dubai - United Arab Emirates
Tel : +971 4 8858907, Fax : +971 4 8854316 PO Box No 88490, Dubai Investment Park 1 Dubai - United Arab Emirates E-mail : sales@metallicboltscom, Web : wwwmetallicboltscom About Metallic Bolts Metallic
M21Si ISO and M21Vi ISO Ball Valves DN15 to DN150
Local regulations may restrict the use of this product to below the conditions quoted. In the interests of development and improvement of the product, we reserve the right to change the specification without
M21Si ISO and M21Vi ISO Ball Valves DN15 to DN150
Page 1 of 6 TI-P133-77 ST Issue 1 M21Si ISO and M21Vi ISO Ball Valves DN15 to DN150 Description Both the M21Si and M21Vi are reduced bore ball valves, with a single piece body, having ISO mounting as standard.
SECTION COMMON WORK RESULTS FOR FIRE SUPPRESSION
SECTION 21 05 00 COMMON WORK RESULTS FOR FIRE SUPPRESSION PART 1 - GENERAL 1.1 SUMMARY A. This section supplements all sections in this division, including pipe, fittings, valves, and connections for sprinkler
Curtain Wall Stick System (Capped)
Curtain Wall Stick System (Capped) Stick Construction Capped Curtain Wall Reference Brand: Sapa Building System Elegance 52 ST GENERAL DESCRIPTION Grid based thermally insulated curtain wall system with
Why Fume Extraction? Fine dust accumulation in the human body. 90 minutes soldering with leadfree solder wire
Why Fume Extraction? Many work environments today, including soldering, adhesives, welding and laser applications, create particles and gases that can be harmful to the work place and the environment.
SECTION 13. A. Extent of Work: The requirements of this section apply to the piping systems specified elsewhere in these specifications.
SECTION 13 PIPE, TUBE AND PART 1 - GENERAL 1.01 DESCRIPTION A. Extent of Work: The requirements of this section apply to the piping systems specified elsewhere in these specifications. 1.02 QUALITY ASSURANCE
Fiberstrut Parts Catalogue
Fiberstrut s Catalogue 1 Technical Information Fiberstrut Fabrication The installation of fiberglass channels and accessories is similar to the installation of metallic channels and accessories. All standard
MICHIGAN DEPARTMENT OF LICENSING AND REGULATORY AFFAIRS DIRECTOR S OFFICE GENERAL INDUSTRY SAFETY AND HEALTH STANDARD OCCUPATIONAL HEALTH STANDARDS
MICHIGAN DEPARTMENT OF LICENSING AND REGULATORY AFFAIRS DIRECTOR S OFFICE GENERAL INDUSTRY SAFETY AND HEALTH STANDARD OCCUPATIONAL HEALTH STANDARDS Filed with the secretary of state on These rules become
High-Clearance Alloy Scaffolds
High-Clearance Alloy Scaffolds Klik Hi-Clear Unit Scaffolds OmegaDeck 250 Scaffolds GP Hi-Clearance Scaffolds Bespoke Hi-Clearance Scaffolds over 3.0m long Alloy Step-Over Platforms HighClearanceAlloyScafolds2017A.pub
Technical Data Sheet 1/7 RAPIDO Butterfly Valve RT0115GB_Technisches_Datenblatt_RAPIDO.doc A
Technical Data Sheet 1/7 General information / The aluminium and stainless steel butterfly valves are developed and produced by RICO Sicherheitstechnik AG. / All butterfly valves are 100% gastight and
Smarter. Safer. Leaner.
Smarter. Safer. Leaner. Fast Installation and Removal Decrease Leading Edge Exposure by 87% OSHA Compliant Versatile and Reusable Use Perimeter Protection Posts During Construction: At Building Perimeter
SECTION STORM DRAINAGE PIPING SPECIALTIES PART 1 - GENERAL 1.01 RELATED DOCUMENTS
SECTION 22 14 23 PART 1 - GENERAL 1.01 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification Sections, apply
min. 50min. 65min. PIT / P3 / P4 Ø
Flush design Stop switch, IP 65 Equipment consisting of (schematic overview) 2 78 23 Actuator Anti-twist ring 2... 6 Pressure ring = Screw terminal Product can differ from the configuration. Bayonet flange
SHAFT-MOUNTED FLAP WHEELS
FLAP WHEELS 49 SHAFT-MOUNTED FLAP WHEELS Description: The abrasive flaps are radially arranged from the tool axis. RG shaft-mounted flap wheels are coupled to the electrical or pneumatic tool spindle by
SECTION VIBRATION ISOLATION
SECTION 15240 VIBRATION ISOLATION PART 1 GENERAL 1.01 SUMMARY A. Related Sections: 1. 15450 - Plumbing Equipment. 2. 15510 - Piping (HVAC). 3. 15515 Valves, Hangers, and Specialties. 4. 15540 - Pumping
Diaphragm seal with threaded connection Threaded design Model
Pressure Diaphragm seal with threaded connection Threaded design Model 990.10 WIKA data sheet DS 99.01 for further approvals see page 6 Applications For aggressive, hot, corrosive, environmentally hazardous
RUUKKI FORMA DESIGN INSTRUCTION
www.ruukki.com RUUKKI FORMA DESIGN INSTRUCTION 1. General Ruukki Forma is a complete façade system in which Ruukki energy panels form an energy efficient base structure and Ruukki cladding products finalize
Facette Wall luminaires for discharge lamps or incandescent lamps
all luminaires for discharge lamps or incandescent lamps Facette wall luminaires in 3 sizes are available for compact fluorescent, incandescent or high pressure discharge lamps. Uniform illumination of
M15 ISO Ball Valve DN¼" to DN2½"
Local regulations may restrict the use of this product to below the conditions quoted. In the interests of development and improvement of the product, we reserve the right to change the specification without
Why choose OKI ISOLA?
EN 6 Why choose OKI? TAILOR-MADE CONFIGURATIONS AND SOLUTIONS Like the rest of OKI range, can be configured in compliance with any tender specification. Not only the customer can select from a range of
METHOD STATEMENT FOR Dry Wall With Resilient Clip
METHOD STATEMENT FOR Dry Wall With Resilient Clip Revisions Details: Rev. Date of Issue Prepared 0 6/15/2011 AH Engineering Manager Reviewed QA/QC Manager Approved Project Director Description Originator:
W E I N S P I R E W O R K
W E I N S P I R E W O R K Updated 13.08.2018 Founded in 1906, GBP Ergonomics AB is a leading producer of ergonomic workspaces in Scandinavia, supplying work stations, lockers, pedestals, trolleys, accessories
Planning and installation instructions
Planning and installation instructions Stofix Oy Ahlmaninkatu 2 E 40100 Jyväskylä Finland stofixgroup@stofix.com www.stofix.com 2 PLANNING AND INSTALLATION INSTRUCTIONS... 1 1 General... 3 2 Project Design...
PROTECT BOLLARD PROTECT FOUNDATIONS RE-USE BOLLARD
\\ PROTECT FOUNDATIONS Impact Recovery System protects foundations from damage when bollards are impacted or need replacing. Lifetime warranty! RE-USE If badly impacted bollard is removed and reinstated
BULLETIN MARCH 2009 POWERRAC CYLINDER ACTUATORS TECHNICAL SPECIFICATIONS
BULLETIN 74.00-2 MARCH 2009 POWERRAC CYLINDER ACTUATORS TECHNICAL SPECIFICATIONS Materials of Construction B21 R1A & R2A B9D B9E B9G B9H B9F B15 B14 B11 B10 B12 B13 B9C B7 B9A B6 B5 B9B B8 B22 B2 B20 B19
DRAFT UGANDA STANDARD
DRAFT UGANDA STANDARD DUS1910-2 First Edition 2017-10-20 Metal Chairs for 0ffice Purposes Part. 2: Revolving and Tilting- Specification Reference number DUS 1910-2:2017 UNBS 2017 DUS 1910-2:2017 Compliance
Schools and nurseries. Description of furniture
Schools and nurseries Description of furniture ST Skoleinventar A/S. January 201 201 ST Skoleinventar A/S CONTENTS 1.0 CUPBOARDS 1.1 Carcass 1.2 Shelves 1.3 Plinths 1. Infill panels 1.5 Light E 2.0 DOORS
LIGHTNING PROTECTION SYSTEM EARTHING SYSTEM ELECTRICAL ACCESSORIES
LIGHTNING PROTECTION SYSTEM EARTHING SYSTEM ELECTRICAL ACCESSORIES AIR TERMINAL AIR TERMINAL FIXING BASE (flat) Material Aluminium / Copper Model Al-300-16 / Cu-300-16 Model Al-16 / GM-16 Diameter 16mm
SpiralVeyor SV Series
SpiralVeyor SV Series SV_PDS_EN_0 Last update 0-0 Version Introduction How to read this document This Product Data Sheet describes the relevant standard features, options, accessories and approved application