Material Safety Data Sheet

Transcription

1 Material Safety Data Sheet Revision Date: 05/08/2006 Issue date: 06/19/ CHEMICAL PRODUCT AND COMPANY IDENTIFICATION Product name: DB EPOXY ADH E-120HP 50 ML. HAR Item No. : 29353_ / IDH No Product type: Epoxy Hardener Region: United States Company address: Henkel Corporation 1001 Trout Brook Crossing Rocky Hill, Connecticut Contact Information: Telephone: (860) Emergency telephone: (860) Internet: 2. COMPOSITION/INFORMATION ON INGREDIENTS Hazardous components % ACGIH TLV OSHA PEL OTHER Polyamide resin mg/m³, skin, dermal sensitizer TWA, (WEEL) ppm, skin TWA, (WEEL) 3. HAZARDS IDENTIFICATION EMERGENCY OVERVIEW HMIS: Physical state: Liquid HEALTH: 3* Color: Amber FLAMMABILITY: 1 Odor: Slight PHYSICAL HAZARD: 0 Personal Protection: See Section 8 DANGER: CAUSES EYE AND SKIN BURNS. MAY CAUSE ALLERGIC SKIN REACTION. MAY BE HARMFUL IF SWALLOWED OR ABSORBED THROUGH SKIN. Relevant routes of exposure: Eye contact, Ingestion, Inhalation, Skin contact Potential Health Effects Inhalation: Skin contact: Eye contact: Ingestion: Existing conditions aggravated by exposure: Moderate respiratory tract irritation. Causes skin burns. May cause allergic skin reaction. Severe skin irritation. May be harmful if absorbed through skin. Causes eye burns. Severe eye irritation. May cause permanent visual impairment. If ingested, severe burns of the mouth and throat, as well as a danger of perforation of the esophagus and the stomach. May be harmful if swallowed. Pre-existing skin, eye and respiratory allergies. See Section 11 for additional toxicological information. Item No. : 29353_ / IDH No Product name: DB EPOXY ADH E-120HP 50 ML. HAR 1 of 4

2 4. FIRST AID MEASURES Inhalation: Skin contact: Eye contact: Ingestion: Notes to physician: Remove to fresh air. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. Get medical attention. Remove contaminated clothing and shoes. Immediately flush skin with plenty of water (using soap, if available). Get medical attention. Wash clothing before reuse. Immediately flush eyes with plenty of water for at least 15 minutes. Get medical attention. DO NOT induce vomiting unless directed to do so by medical personnel. Never give anything by mouth to an unconscious person. Get medical attention immediately.. 5. FIRE-FIGHTING MEASURES Flash point: Greater than 93ºC (200ºF) (estimated) Autoignition temperature: Flammable/Explosive limits-lower %: Flammable/Explosive limits-upper %: Extinguishing media: Special fire fighting procedures: Unusual fire or explosion hazards: Hazardous combustion products: Use dry chemical, CO2, water spray or `alcohol` foam. Wear self-contained breathing apparatus and full protective clothing, such as turn-out gear. Personnel in vicinity and downwind should be evacuated. Burning produces obnoxious and toxic fumes. Ammonia. Oxides of carbon. Oxides of nitrogen. Nitric acid. 6. ACCIDENTAL RELEASE MEASURES Environmental precautions: Clean-up methods: Do not allow material to contaminate ground water system. Prevent product from entering drains or open waters. Evacuate and ventilate spill area; dike spill to prevent entry into water system; wear full protective equipment during clean-up. Scrape up spilled material and place in a closed container for disposal. 7. HANDLING AND STORAGE Handling: Storage: Do not get in eyes. Do not get on skin or clothing. Do not breathe mist or vapors. Do not taste or swallow. Keep container closed. Use only with adequate ventilation. Wash thoroughly after handling. Keep in a cool, well ventilated area away from heat, sparks and open flame. Keep container tightly closed until ready for use. Do not store near acids. Do not store in reactive metal containers. Incompatible products: Refer to Section 10. For information on product shelf life contact Henkel Customer Service at (800) EXPOSURE CONTROLS / PERSONAL PROTECTION Engineering controls: Respiratory protection: Skin protection: Eye/face protection: Use local ventilation if general ventilation is insufficient to maintain vapor concentration below established exposure limits. Use NIOSH approved respirator if there is potential to exceed exposure limit(s). Use chemical resistant, impermeable clothing including gloves and either an apron or body suit to prevent skin contact. Safety goggles or safety glasses with side shields. In a splash hazard environment, chemical goggles should be used in combination with a full face shield. Item No. : 29353_ / IDH No Product name: DB EPOXY ADH E-120HP 50 ML. HAR 2 of 4

3 See Section 2 for exposure limits. 9. PHYSICAL AND CHEMICAL PROPERTIES Physical state: Color: Odor: Vapor pressure: ph: Boiling point/range: Melting point/range: Specific gravity: Vapor density: Evaporation rate: Solubility in water: Partition coefficient (n-octanol/water): VOC content: Liquid Amber Slight Not applicable Partial <1%; <10 grams/liter (estimated) 10. STABILITY AND REACTIVITY Stability: Hazardous polymerization: Hazardous decomposition products: Incompatability: Conditions to avoid: Stable. Will not occur. Ammonia. Oxides of carbon. Oxides of nitrogen. Nitric acid. Strong oxidizing agents. Organic acids. Mineral acids. Storage with incompatible materials. 11. TOXICOLOGICAL INFORMATION Carcinogen Status Hazardous components NTP Carcinogen IARC Carcinogen OSHA Carcinogen Polyamide resin Literature Referenced Target Organ & Other Health Effects Hazardous components Polyamide resin Health Effects/Target Organs Corrosive, Irritant Mutagen, Irritant, Allergen Allergen, Developmental, Irritant, Mutagen, Corrosive 12. ECOLOGICAL INFORMATION Ecological information: Not known No specific studies have been conducted by Henkel on the ecotoxicity or environmental fate of this material; however, commonly available data on the material indicate that uncontrolled releases to soil, groundwater, or surface waters could entail acute and/or chronic ecological effects, depending on the quantity and concentration of such releases. Releases of volatile components to the atmosphere are not believed to entail significant ecological consequences provided such releases are within the exposure levels set forth in this document. Accordingly, all appropriate measures should be taken to avoid uncontrolled releases to the environment, and any spills or other uncontrolled releases which may occur should be contained and cleaned up immediately in accordance with Section 6. Item No. : 29353_ / IDH No Product name: DB EPOXY ADH E-120HP 50 ML. HAR 3 of 4

4 13. DISPOSAL CONSIDERATIONS Information provided is for unused product only. Recommended method of disposal: EPA hazardous waste number: Dispose of according to Federal, State and local governmental regulations. Not a RCRA hazardous waste. 14. TRANSPORT INFORMATION The shipping classifications in this section are for non-bulk packaging only (unless otherwise specified). Shipping classification may be different for bulk packaging. U.S. Department of Transportation Ground (49 CFR): Proper shipping name: AMINES, LIQUID, CORROSIVE, N.O.S. ( Tetraethylenepentamine, Triethylenetetramine ) Hazard class or division: 8 UN 2735 III Exceptions: Consumer Commodity ORM-D (Not more than 5L) Marine pollutant: International Air Transportation (ICAO/IATA): Proper shipping name: AMINES, LIQUID, CORROSIVE, N.O.S. ( Tetraethylenepentamine, Triethylenetetramine ) Hazard class or division: 8 UN2735 III WaterTransportation (IMO/IMDG): Proper shipping name: AMINES, LIQUID, CORROSIVE, N.O.S. ( Tetraethylenepentamine, Triethylenetetramine ) Hazard class or division: 8 UN2735 III Marine pollutant: known United States Regulatory Information 15. REGULATORY INFORMATION TSCA 8 (b) Inventory Status: TSCA 5 (a) (2) SNUR: TSCA 12 (b) Export Notification: CERCLA/SARA Section 302 EHS: CERCLA/SARA Section 311/312: CERCLA/SARA 313: California Proposition 65: All components are listed or are exempt from listing on the Toxic Substances Control Act Inventory.... Immediate Health Hazard, Delayed Health Hazard. No California Proposition 65 listed chemicals are known to be present. Canada Regulatory Information CEPA DSL/NDSL Status: WHMIS hazard class: All other components are listed on or are exempt from listing on the Domestic Substances List. D.2.B, E 16. OTHER INFORMATION This material safety data sheet contains changes from the previous version in sections: First issue. Prepared by: Regulatory Affairs DISCLAIMER: The data contained herein are furnished for information only and are believed to be reliable. However, Henkel Corporation does not assume responsibility for any results obtained by persons over whose methods Henkel Corporation has no control. It is the user's responsibility to determine the suitability of Henkel's products or any production methods mentioned herein for a particular purpose, and to adopt such precautions as may be advisable for the protection of property and persons against any hazards that may be involved in the handling and use of any of Henkel Corporation's products. In light of the foregoing, Henkel Corporation specifically disclaims all warranties, express or implied, including warranties of merchantability and fitness for a particular purpose, arising from sale or use of Henkel Corporation's products. Henkel Corporation further disclaims any liability for consequential or incidental damages of any kind, including lost profits. Item No. : 29353_ / IDH No Product name: DB EPOXY ADH E-120HP 50 ML. HAR 4 of 4

5 Material Safety Data Sheet Revision Date: 06/20/2005 Issue date: 06/20/ CHEMICAL PRODUCT AND COMPANY IDENTIFICATION Product name: DB EPOXY ADH E-120HP 50 ML RES Item No. : 29535_ / IDH No Product type: Epoxy Resin Region: United States Company address: Henkel Corporation 1001 Trout Brook Crossing Rocky Hill, Connecticut Contact Information: Telephone: (860) Emergency telephone: (860) Internet: 2. COMPOSITION/INFORMATION ON INGREDIENTS Hazardous components % ACGIH TLV OSHA PEL OTHER Elastomeric polymer Amorphous fumed silica HAZARDS IDENTIFICATION EMERGENCY OVERVIEW HMIS: Physical state: Liquid HEALTH: 2* Color: Pale yellow FLAMMABILITY: 1 Odor: Faint, Epoxy PHYSICAL HAZARD: 1 Personal Protection: See Section 8 WARNING: MAY CAUSE ALLERGIC SKIN REACTION. MAY CAUSE EYE, SKIN AND RESPIRATORY TRACT IRRITATION. Relevant routes of exposure: Eye contact, Skin contact, Inhalation, Ingestion Potential Health Effects Inhalation: Skin contact: Eye contact: Ingestion: Existing conditions aggravated by exposure: This material does not normally present an inhalation hazard, however, in applications where vapors (caused by high temperatures) or mists (caused by mixing) are created, breathing may cause respiratory tract irritation. May cause skin irritation with discomfort or rash. May cause allergic skin reaction. May cause irritation. Not a relevant route of exposure. Do not taste or swallow. Skin disorders. Skin allergies. See Section 11 for additional toxicological information. Item No. : 29535_ / IDH No Product name: DB EPOXY ADH E-120HP 50 ML RES 1 of 4

6 4. FIRST AID MEASURES Inhalation: Skin contact: Eye contact: Ingestion: Remove to fresh air. If discomfort persists seek medical attention. Remove contaminated clothing and shoes. After contact with skin, wash immediately with plenty of water. Wash clothing before reuse. Get medical attention if symptoms develop and persist. Immediately flush eyes with plenty of water for at least 15 minutes. If eye irritation persists, consult a specialist. Do not induce vomiting. Never give anything by mouth to an unconscious person. Obtain medical attention. 5. FIRE-FIGHTING MEASURES Flash point: Greater than 93ºC (200ºF) Setaflash Autoignition temperature: Flammable/Explosive limits-lower %: Flammable/Explosive limits-upper %: Extinguishing media: Special fire fighting procedures: Unusual fire or explosion hazards: Hazardous combustion products: Water spray (fog), foam, dry chemical or carbon dioxide. Wear self-contained breathing apparatus and full protective clothing, such as turn-out gear. In the event of fire, cool tanks with water spray. Closed containers may rupture (due to build up of pressure) when exposed to extreme heat. Oxides of carbon. Aldehydes. Acids. Irritating organic fragments. 6. ACCIDENTAL RELEASE MEASURES Environmental precautions: Clean-up methods: Prevent product from entering drains or open waters. Soak up with inert absorbent. Store in a closed container until ready for disposal. Flush with water. Prevent product from entering drains. 7. HANDLING AND STORAGE Handling: Storage: Incompatible products: Keep container closed. Avoid contact with eyes, skin and clothing. Avoid breathing vapor and mist. Wash thoroughly after handling. Keep in a cool, well ventilated area away from heat, sparks and open flame. Keep container tightly closed until ready for use. Oxidizing agents. Strong acids or bases. Amines. Avoid contact with water. Do not allow molten material to contact water as this can cause violent eruptions, splatter hot material or ignite flammable material. For information on product shelf life contact Henkel Customer Service at (800) EXPOSURE CONTROLS / PERSONAL PROTECTION Engineering controls: Respiratory protection: Skin protection: Eye/face protection: General ventilation is acceptable if the exposure to materials in section 2 is maintained below applicable exposure limits. Refer to OSHA standards , , No personal respiratory protective equipment normally required. Chemical resistant, impermeable gloves. Published literature, test data and glove and clothing manufacturers indicate protection is provided with Butyl, or EVAL-Laminate materials. Safety goggles or safety glasses with side shields. Item No. : 29535_ / IDH No Product name: DB EPOXY ADH E-120HP 50 ML RES 2 of 4

7 See Section 2 for exposure limits. 9. PHYSICAL AND CHEMICAL PROPERTIES Physical state: Color: Odor: Vapor pressure: ph: Boiling point/range: Melting point/range: Specific gravity: Vapor density: Evaporation rate: Solubility in water: Partition coefficient (n-octanol/water): VOC content: Liquid Pale yellow Faint, Epoxy Not determined Not applicable Greater than 149ºC (300ºF) Negligible. 0.14% (Resin and hardener mixed) 10. STABILITY AND REACTIVITY Stability: Hazardous polymerization: Hazardous decomposition products: Incompatability: Conditions to avoid: Stable. Reaction with some curing agents may produce an exothermic reaction which in large masses could cause runaway polymerization. reasonably foreseeable Oxidizing agents. Strong acids and strong bases. Amines. Excessive heat. Storage with incompatible materials. Avoid mixing resin (Part A) and curing agent (Part B) unless you plan to use immediately. Failure to observe these precautions may result in excessive heat build-up causing an exotherm. 11. TOXICOLOGICAL INFORMATION Carcinogen Status Hazardous components NTP Carcinogen IARC Carcinogen OSHA Carcinogen Elastomeric polymer Amorphous fumed silica Literature Referenced Target Organ & Other Health Effects Hazardous components Elastomeric polymer Amorphous fumed silica Health Effects/Target Organs Allergen, Irritant Allergen, Irritant No Target Organs No Target Organs 12. ECOLOGICAL INFORMATION Ecological information: Not known Item No. : 29535_ / IDH No Product name: DB EPOXY ADH E-120HP 50 ML RES 3 of 4

8 13. DISPOSAL CONSIDERATIONS Information provided is for unused product only. Recommended method of disposal: EPA hazardous waste number: Dispose of according to Federal, State and local governmental regulations. Not a RCRA hazardous waste. 14. TRANSPORT INFORMATION The shipping classifications in this section are for non-bulk packaging only (unless otherwise specified). Shipping classification may be different for bulk packaging. U.S. Department of Transportation Ground (49 CFR): Proper shipping name: Not regulated Hazard class or division: International Air Transportation (ICAO/IATA): Proper shipping name: Not regulated Hazard class or division: WaterTransportation (IMO/IMDG): Proper shipping name: Hazard class or division: Marine pollutant: Not regulated 15. REGULATORY INFORMATION United States Regulatory Information TSCA 8 (b) Inventory Status: TSCA 12 (b) Export Notification: CERCLA/SARA Section 302 EHS: CERCLA/SARA Section 311/312: CERCLA/SARA 313: California Proposition 65: All components are listed or are exempt from listing on the Toxic Substances Control Act Inventory.. above reporting de minimus. Immediate Health Hazard, Delayed Health Hazard above reporting de minimus. This product contains a chemical known to the State of California to cause cancer and birth defects or other reproductive harm. Canada Regulatory Information CEPA DSL/NDSL Status: WHMIS hazard class: All components are listed on or are exempt from listing on the Domestic Substances List. D.2.B 16. OTHER INFORMATION This material safety data sheet contains changes from the previous version in sections: Revised to new format. Prepared by: Regulatory Affairs DISCLAIMER: The data contained herein are furnished for information only and are believed to be reliable. However, Henkel Corporation does not assume responsibility for any results obtained by persons over whose methods Henkel Corporation has no control. It is the user's responsibility to determine the suitability of Henkel's products or any production methods mentioned herein for a particular purpose, and to adopt such precautions as may be advisable for the protection of property and persons against any hazards that may be involved in the handling and use of any of Henkel Corporation's products. In light of the foregoing, Henkel Corporation specifically disclaims all warranties, express or implied, including warranties of merchantability and fitness for a particular purpose, arising from sale or use of Henkel Corporation's products. Henkel Corporation further disclaims any liability for consequential or incidental damages of any kind, including lost profits. Item No. : 29535_ / IDH No Product name: DB EPOXY ADH E-120HP 50 ML RES 4 of 4