Copyright by ATM Recyclingsystems GmbH Page 1 of 5. Post-consumer scrap (Old scrap) Nomenclature. Copper scrap in large pieces
|
|
|
- Cordelia Griffith
- 6 years ago
- Views:
Transcription
1 Post-consumer scrap (Old scrap) Copper scrap in large pieces Copper scrap in small pieces Mixed copper scrap Candy Dream Dream Sheets, punch scraps, slide bar, wires, pipes Sheets, rainwater gutters, water boilers, heaters Sheets, pipes etc Common nomenclature Cu Raff Cu Raff Cu Raff Main Cutting / Baling Cutting / Baling Cutting / Baling central Loose scrap / package Package Package Copyright by ATM Recyclingsystems GmbH Page 1 of 5
2 Pre-consumer scrap (New scrap) Copper scrap in large pieces Copper scrap in small pieces Mixed copper scrap Candy Dream Dream Sheets, punch scraps, slide bar, wires, pipes Sheets, rainwater gutters, water boilers, heaters Sheets, pipes etc. Common nomenclature Cu Raff Cu Raff Cu Raff Main Cutting / Baling Cutting / Baling Cutting / Baling central Loose scrap / package Package Package Copyright by ATM Recyclingsystems GmbH Page 2 of 5
3 Cable scrap Dismantled cable Isolated cable ( 75 mm²) Isolated cable ( 90 mm²) Copper-steel cable Copper-lead cable Common nomenclature Barely; Berry Druid, Droid Druid, Droid - - Dismantled clean copper cable (without any residue from burning, no fat, no paint, no tin and no cable clips) Isolated cable (with complete cable coating); including enamelled wire > 99 > 99 Isolated cable (with complete cable coating) Copper cable with steel casing and/or steel core Copper cable with lead casing Cu Millberry Cu Millberry Cu Raff Cu Raff Cu Raff Cu granules IA (very fine): Cu content 99.9 %, grain size max. 0.5 mm; Cu granules IA (fine): Cu content 99.9 %, grain size max. 1.5 mm; Cu granules IA (coarse): Cu content 99.9 %, grain size > 1.5 mm; Cu granules IB: Cu content > 99.0 %, grain size by appointment; Cu granules II: Cu content > 98.5 %, other metals according to customer-specific agreement, with limited contents of plastics or grease, grain size by appointment; Cu-Raff granules: Cu content > 90 %, other metals according to customer-specific agreement, with limited contents of plastics or grease, grain size by agreement; Al-granular: Al content > 99.5 %, grain size by agreement; Al hack wire: Al content > 95 %, Al wire not burned and not alloyed, other metals according to customer-specific agreement, with limited contents of plastics or grease, grain size by agreement; Al-Cu granules: Al/Cu content > 95 %, custom specified composition (oriented on application) - Main Briquetting / Baling Briquetting Briquetting Briquetting Briquetting central Briquetting press / Briquetting press Briquetting press Briquetting press Briquetting press - - Briquette / Package Briquette Briquette Briquette Briquette Copyright by ATM Recyclingsystems GmbH Page 3 of 5
4 Cable scrap Shredded scrap WEEE??? Copper granules Shredded scrap for further ing (shredder light fraction, etc.) Waste electrical and electronic equipment??? Clove, Cocoa EM3 EM3 Crushed and dismantled cable Scrap from shredders, ELV recycling, WEEE treatment - Common nomenclature Cu Millberry Main Briquetting Briquetting Briquetting / Baling central Briquetting press Briquetting press Briquetting press / Briquette Briquette Briquette / Package Copyright by ATM Recyclingsystems GmbH Page 4 of 5
5 Copper chips Iron containing copper scrap (lumpy or crushed) Tin coated copper scrap Copper sludge (mixed and pure) Chips Copper from taps, stators and rotors Cable clips, cable bars (continuous tin coated; without solder) Origins from galvanization - Copper chips from machining ELV recycling, WEEE - - Common nomenclature > Main Briquetting Baling Briquetting central Briquetting press Briquetting press - Briquette Package Package Briquette Copyright by ATM Recyclingsystems GmbH Page 5 of 5
6 copper scrap with the appropriate equipment for the preliminary ing regarding recycling (Cu part 2) Brass (Cu-Zn alloys) Brass scrap with 63 % Cu Brass scrap with 58 % Cu Brass 63 wastes / Sheets Brass 63 wastes tin coated Brass 58 wastes / Sheets (ISRI scrap specification) Honey, Ivory, Label, Noble Honey, Ivory, Honey, Ivory, Label, Noble Cold forming and thermoforming brasses Main Cutting / Baling Cutting / Baling Cutting / Baling central Package Package Package Copyright by ATM Recyclingsystems GmbH Page 1 of 4
7 copper scrap with the appropriate equipment for the preliminary ing regarding recycling (Cu part 2) Brass (Cu-Zn alloys) Brass chips Tabs Wires Residues (ISRI scrap specification) Brass 58 chips Mixed brass chips / Special brass chips Heavy brass scrap / Ms tabs Brass hair wire Brass -slags, -dross and - ashes Night, Nomad Niece, Nomad Machining brass (Cu with % Zn and Pb) Preliminary ed for smelting Main Briquetting Briquetting Baling Baling Briquetting central Briquetting press Briquetting press Briquetting press - - Briquette Briquette Package Package Briquette Copyright by ATM Recyclingsystems GmbH Page 2 of 4
8 copper scrap with the appropriate equipment for the preliminary ing regarding recycling (Cu part 2) Red brass (Cu-Sn-Zn alloys) Red brass scrap Red brass chips Residues (ISRI scrap specification) Red brass-brass wastes Red brass chips Red brass-brass chips Red brass -slags, -dross and -ashes Ebony, Grape Enerv, Erin Elias, Erin - Mixed red brass scrap (alloys of Cu-Sn-Zn) - - Main Baling Briquetting Briquetting Briquetting central Briquetting press Briquetting press Briquetting press - Package Briquette Briquette Briquette Copyright by ATM Recyclingsystems GmbH Page 3 of 4
9 copper scrap with the appropriate equipment for the preliminary ing regarding recycling (Cu part 2) Rolling bronze scrap Rolling bronze Rolling bronze chips Rolling bronze chips (tin coated) Wastes Chips Wastes (tin coated) (ISRI scrap specification) Eland; Parch Elias Eland, Parch - - Main Baling Briquetting Baling central Briquetting press Package Briquette Package Copyright by ATM Recyclingsystems GmbH Page 4 of 4
Maerz. Andritz MAERZ GmbH COPPER DIVISION Scrap smelting, remelting and refining what furnace options are available for the recycler?
Maerz Andritz MAERZ GmbH COPPER DIVISION Scrap smelting, remelting and refining what furnace options are available for the recycler? The ANDRITZ GROUP Overview Company ANDRITZ AG, Graz, Austria (Group
ArcelorMittal Dofasco Scrap Specifications and Requirements
ArcelorMittal Dofasco Scrap Specifications and Requirements Revision date: January 2017 Table of Contents Type of Scrap: Auto Cast (Brake Rotors and Drums)... 2 Type of Scrap: Bushelling... 4 Type of Scrap:
CHAPTER 74 COPPER AND ARTICLES THEREOF
CHAPTER 74 COPPER AND ARTICLES THEREOF NOTES: 1. In this Chapter the following expressions have the meanings hereby assigned to them: (a) Refined Copper Metal containing at least 99.85 per cent by weight
Copper South China(Nanhai)
9 Note : prices with the mark "*" include tax invoice cost September 6, 2018 RMB/T,1ton 2204.62lbs Copper copper cathode(domestic standard) * 47900-48100 +400 H65copper strap(0.3-0.8mm,y2) 47200-47500
EUROPEAN STEEL SCRAP SPECIFICATION
EUROPEAN STEEL SCRAP SPECIFICATION General Conditions applicable to all grades As it practically achievable in customary preparation and handling of the grade involved The definitions of this list of specifications
Metals Ferrous and Non - Ferrous Icons key:
1 of 9 Metals Ferrous and Non - Ferrous Icons key: Flash activity. These activities are not editable. Accompanying worksheet. Teacher s notes included in the Notes Page. Useful websites for further information.
English BRIQUETTING BALING BREAKING CUTTING SHREDDING SORTING HIGH PERFORMANCE METAL RECYCLING TECHNOLOGY
English BRIQUETTING BALING BREAKING CUTTING SHREDDING SORTING 1 HIGH PERFORMANCE METAL RECYCLING TECHNOLOGY It is a well-known fact: productivity is not just productivity. Metal recycling is, above all,
EUROPEAN STEEL SCRAP SPECIFICATION. General Conditions applicable to all grades
Bundesvereinigung Deutscher Stahlrecycling- und Entsorgungsunternehmen e.v. EUROPEAN STEEL SCRAP SPECIFICATION Version: June 1 st 1995 General Conditions applicable to all grades As is pratically achievable
Nonferrous Scrap. Methodology and Price Specifications
Nonferrous Scrap Methodology and Price Specifications Last reviewed: May 2017 American Metal Market (AMM) is the leading independent supplier of market intelligence, pricing, assessments, analysis and
Lecture 13 End of Life Vehicles
Lecture 13 End of Life Vehicles Introduction 2/25 An end-of-life vehicle is a car or a light commercial vehicle (carry max. 3.5 tons) which is to be disposed of by the registered owner. Sources of ELVs
INDEX METALS FERRIC METALS NON-FERRIC METALS WORKING WITH METALS METAL FORMING TECHNIQUES ENVIRONMENTAL IMPACT OF METAL EXTRACTION
METALS INDEX METALS FERRIC METALS NON-FERRIC METALS WORKING WITH METALS METAL FORMING TECHNIQUES ENVIRONMENTAL IMPACT OF METAL EXTRACTION METALS CHEMICAL ELEMENTS FOUND IN NATURE IN SOLID STATE AT ROOM
Adam J Gesing Gesing Consultants Inc Lightweighting Summit 19-21May 2014, Detroit, MI
Adam J G G C Lightweighting Summit 19-21May 2014, Detroit, MI Current state of light-metal recycling from both production facilities and post consumer scrap Use of scrap alloy batching for vehicle production
List of dangerous and non-dangerous wastes which can be received and treated at Hydrometal
Authorisations List of dangerous and non-dangerous wastes which can be received and treated at Hydrometal Authorisation of "Députation Permanente du Conseil Provincial de Liège» in its «meeting» of 01
English BRIQUETTING BALING BREAKING CUTTING SHREDDING SORTING HIGH PERFORMANCE - METAL RECYCLING
English BRIQUETTING BALING BREAKING CUTTING SHREDDING SORTING HIGH PERFORMANCE - METAL RECYCLING Metal Recycling is not just Metal Recycling It is a well-known fact: metal recyc-ling is not just metal
Material : Steel Scrap Grade : All SDI Part # N/A
Material : Steel Scrap Grade : All SDI Part # N/A Industry Id : ISRI # s: N/A A.K.A. : N/A Scope : The following general quality specifications apply to all scrap grades purchased by Steel Dynamics, Inc.
Metals. General information
Metals. General information Read and copy the following text: Metals are divided into two groups: Metals that contain iron are called Ferrous Metals (Alloys). Metals that do not contain iron are called
Government Gazette Staatskoerant
Government Gazette Staatskoerant REPUBLIC OF SOUTH AFRICA REPUBLIEK VAN SUID AFRIKA Regulation Gazette No. 10873 10177 Regulasiekoerant Vol. 639 28 September September 2018 No. 41940 N.B. The Government
WHEN WASTE CEASES TO BE WASTE. The Case of Ferrous Scrap
EUROFER and EFR Elements to Progress the Discussion on WHEN WASTE CEASES TO BE WASTE The Case of Ferrous Scrap 28 June 2000 EUROFER and EFR 1 Contents: A description of the three scrap cycles that cover
Aluminum Siding - includes aluminum siding (free of insulation), downspouts, gutters, trimming, and empty wire conduit.
*The following information is only to be used as a guide. Final decision of material type will be made by qualified Berks Container Recovery employees. If you have a material that you would like to recycle
Aluminum Siding - includes aluminum siding (free of insulation), downspouts, gutters, trimming, and empty wire conduit.
*The following information is only to be used as a guide. Final decision of material type will be made by qualified Berks Container Recovery employees. If you have a material that you would like to recycle
TRANSFORMING MATERIALS INTO VALUE
AUTOMOTIVE GLASS RECYCLING Due to the cost implications of producing virgin glass, the recycling of automotive glass (see figure 1) has long made great sense. The disposal costs of this resource are not
Separation Technologies for Metal/Plastic Separation hamos KWS. Worldwide market leader in electrostatic separation!
Separation Technologies for Metal/Plastic Separation hamos KWS Worldwide market leader in electrostatic separation! Table of contents 1 2 3 4 5 About hamos 4 Product range 7 Electrostatic metal/plastic
Aluminum recycling. Process for recycling beverage cans. Aluminum recycling
Aluminum recycling Aluminum recycling is the process by which scrap aluminum can be reused in products after its initial production. The process involves simply re-melting the metal, which is far less
EFFICIENT USE OF ALUMINUM SCRAP IN BATCHING SECONDARY ALLOYS AND POTENTIAL FOR SENSOR-BASED SORTERS TO IMPROVE RECYCLING SYSTEM EFFICIENCY
EFFICIENT USE OF ALUMINUM SCRAP IN BATCHING SECONDARY ALLOYS AND POTENTIAL FOR SENSOR-BASED SORTERS TO IMPROVE RECYCLING SYSTEM EFFICIENCY Adam G G C Hartmut Harbeck TiTech GmbH Contents Current light
waste management facility
Certificate Name and address of certification organisation Name: Street: F.-Dannenmann-Str. 12 Country: DE Federal state: BW Post code: 72070 City: Tübingen Certificate number: 2018-0053E Initial certification
Stamping Basics. Die Components Class of Tools Cost Drivers
Stamping Basics Die Components Class of Tools Cost Drivers Basic Types Of Tools Compound Progressive Draw Secondary Tools Compound Die Lower Volume Flatter Parts No Forms Burrs All One Direction Progressive
Advanced Industrial Technologies for Aluminium Scrap Sorting
Advanced Industrial Technologies for Aluminium Scrap Sorting A.J. G, G C M.A. G, T. Erdmann, TiTech GmbH 1 2007 Global Al Flows in million tonnes Remelted Al >42 incl. old scrap? 10 20 9.5 10 Melt loss
NON FERROUS METAL MESH
WALCOOM Walcoom Corporation "Completion on time within budget, focused team and service, Walcoom is always ready to help." Walcoom offers a large selection of non ferrous metal meshes and also thoughtful
Application and importance of copper and copper powder on powder metallurgy field
Application and importance of copper and copper powder on powder metallurgy field In recent years, powder metallurgy scholars have paid more attention to materials that have nanometer and composite feature.
PERSENDA s.n.c MONCALIERI (IT)
s.n.c. 10024 - MONCALIERI (IT) www.paginegialle.it/persenda persenda@virgilio.it SOLID SOLDER WIRES DESCRIPTION: made in "ecological" alloys, free from Lead, have been formulated as a good alternative
Introduction to Copper and Copper Alloys. James Michel Manager, Technical Services Copper Development Association Inc. May 2013
Introduction to Copper and Copper Alloys James Michel Manager, Technical Services Copper Development Association Inc. May 2013 CDA Mission The Copper Development Association, Inc. is a not-for-profit trade
European Commission DG ENV
² European Commission DG ENV A project under the Framework contract G.4/FRA/2007/0067 STUDY ON ANNEX IIIA OF THE EU WASTE SHIPMENT REGULATION Final Report August 17 th, 2009 Contact BIO Intelligence Service
METALS Types, Properties and Production
METALS Types, Properties and Production FFD 301 Furniture Design By Ertan Demirkan 2012 Manufacturing Processes All manufacturing processes can be classified into seven types: 1. Casting and Molding 2.
1. METALS 2. FERRIC METALS 3. NON-FERRIC METALS 4. WORKING WITH METALS 5. METAL FORMING TECHNIQUES 6. ENVIRONMENTAL IMPACT OF METAL EXTRACTION
METALS: 1. METALS 2. FERRIC METALS 3. NON-FERRIC METALS 4. WORKING WITH METALS 5. METAL FORMING TECHNIQUES 6. ENVIRONMENTAL IMPACT OF METAL EXTRACTION 1. METALS: Metals are chemical elements found in nature
Slag Valorisation Symposium
Proceedings of the Fourth International Slag Valorisation Symposium Zero Waste 15-17 April 2015 Leuven, Belgium Editors Annelies Malfliet and Yiannis Pontikes COMBINED METAL AND SLAG VALORISATION AT METALLO-
SHREDDER GUIDE METAL RECYCLING IN SHREDDER PROCESSES. english. We print on 100% recycled paper. TITECH s innovations are helping to produce it.
SHREDDER GUIDE METAL RECYCLING IN SHREDDER PROCESSES english We print on 100% recycled paper. s innovations are helping to produce it. TONS OF RAW MATERIALS Automotive shredder / Wisconsin / USA Why modern
Automotive Recycling. 4 Shredder operation and post shredder Technologies. Prof. Dr.-Ing. Joachim Schmidt
Prof. Dr.-Ing. Joachim Schmidt Automotive Recycling Engineering Workshop at the Nelson Mandela Metropolitan University NMMU Port Elizabeth South Africa 2011 4 Shredder operation and post shredder Technologies
ASR - FROM WASTE TO PRODUCTS
ASR - FROM WASTE TO PRODUCTS Sattler, H.-Peter and Laage, Bernd LSD Umwelt- und Recyclingtechnologie GmbH, Hanau and R-plus Recycling GmbH, Eppingen Germany The paper will explain WESA-SLF, a dry-mechanical
Copper & Copper Alloys CuZn40Pb2 (OF 2357)
Copper and Copper Alloys Page 1 of 6 no responsibility is taken for the correctness of this information 02/2014 Cu Zn Pb Sn Fe Mn Ni Al Si As Co Cr Others min. 57.0 Rem. 1.6 - - - - - - - - - - max. 59.0-2.2
SCRAP SPECIFICATIONS CIRCULAR
SCRAP SPECIFICATIONS CIRCULAR 2017 GUIDELINES FOR NONFERROUS SCRAP FERROUS SCRAP GLASS CULLET PAPER STOCK PLASTIC SCRAP ELECTRONICS SCRAP TIRE SCRAP EFFECTIVE 11/8/2017 Rules Governing the Procedures
Copper & Copper Alloys CuZn33Pb1.5AlAs (OF 2279)
Copper and Copper Alloys Page 1 of 5 no responsibility is taken for the correctness of this information 04/2014 Cu Zn Pb Sn Fe Mn Ni Al Si As Co Cr Others min. 64.0 Rem. 1.2 - - - - 0.8-0.02 - - - max.
Decoating of Metal Scrap for Circular Metals Economy
Decoating of Metal Scrap for Circular Metals Economy Scherpenzeel, 01 November 2017 PROASSORT.com Agenda 1. Introduction 2. Circular Metals Economy (CME) 3. Harvest zinc from steel 4. Harvest tin from
Copper & Copper Alloys CuNi1Si (OF 2403)
Copper and Copper Alloys Page 1 of 5 no responsibility is taken for the correctness of this information 04/2014 Cu Zn Pb Sn Fe Mn Ni Al Si As Co Cr Others Min. Rem. - - - - - 1.0-0.4 - - - - Max. - - 0.02-0.2
IRON, STEEL AND ALUMINIUM PRODUCTS
IRON, STEEL AND ALUMINIUM PRODUCTS NO. PDK 2017 PDK 2012 DESCRIPTION OF GOODS 7207 Semi-finished products of iron or non-alloy steel. - Containing by weight less than 0.25% of carbon: 1 7207110000 720711000
Metallurgy, Alloys, and Applications p. 1 Introduction and Overview p. 3 Major Groups of Copper and Copper Alloys p. 3 Properties of Importance p.
Preface p. vii Metallurgy, Alloys, and Applications p. 1 Introduction and Overview p. 3 Major Groups of Copper and Copper Alloys p. 3 Properties of Importance p. 3 Fabrication Characteristics p. 5 Alloy
Optimizing precious metals recovery from e-waste. EWAM Kenya Joris Lauwers February 2016
Optimizing precious metals recovery from e-waste EWAM Kenya Joris Lauwers February 2016 Agenda Electronic products and trends E-waste recycling chain End-processing @ Umicore: e-scrap & batteries Conclusions
Tribo Bronze. Bronze and Stainless Steel
Tribo Bronze Bronze and Stainless Steel Since 1960 Elcee is supplier of bearings and sliding strips in all kinds of cast bronze and stainless steel materials. Through years of experience we can support
Metal Bulletin. 22 nd International Recycled Aluminum Conference Berlin, Germany November 18, 2014 North American Scrap Supply and Demand Outlook
Metal Bulletin 22 nd International Recycled Aluminum Conference Berlin, Germany November 18, 2014 North American Scrap Supply and Demand Outlook David C. Rosenblum OmniSource Corporation is a wholly owned
Aurubis AG. Long-term trends in copper recycling. Christian Coesfeld. Metal Bulletin Copper Scrap Conference Munich, June,
Aurubis AG Christian Coesfeld Long-term trends in copper recycling Metal Bulletin Copper Scrap Conference Munich, June, 15.-17. 2016 1 Agenda 1. History and status quo 2. Global mega trends 3. Outlook
What you should know about Brazing
What you should know about Brazing By Leif Andersen, Technical Product Manager Welding, WSS When doing brazing, the parent material is not melted as in welding but brought to the bonding temperature. The
Copper & Copper Alloys
Copper and Copper Alloys Page 1 of 6 No responsibility is taken for the correctness of this information 12/2016 Cu Zn Pb Sn Fe Mn Ni Al Si As Co Cr Others min. 58 Rem. - 0.1 0.35 1.8-1.4 0.6 - - - - max.
I. PHYSICAL PROPERTIES PROPERTY METALS NON-METALS
Elements can be classified as metals and non-metals on the basis of their properties. Example of some metals are : Iron (Fe), Aluminium (Al), Silver (Ag), Copper (Cu) Examples of some non-metals are :
Copper & Copper Alloys CuZn31Si1 (OF 2270)
Copper and Copper Alloys Page 1 of 5 no responsibility is taken for the correctness of this information 02/2014 Cu Zn Pb Sn Fe Mn Ni Al Si As Co Cr Others min. 66.0 Rem. 0.1 - - - - - 0.7 - - - - max.
Examples of the ferrous metals: Vehicle scrap metal Demolition Site scrap metal Metal off cuts from manufacturing industries
Schnitzer accepts all types of ferrous and non-ferrous metals. Ferrous Metals mostly contain Iron. They have small amounts of other metals or elements added, to give the required properties. Ferrous Metals
HSS rolled. HSS ground. HSS Co 5 ground. HSS-TiN ground. Twist drills DIN 338 type N. Point cuts:
Twist drills DIN 338 type N High performance twist drill suitable for all normal drilling in conventional materials. Point cut: helical point Helix angle: 20-30 tolerance: h8 Right-hand cutting 1,0 up
CERTIFICATE. Specialised Waste Management Company according to 56 and 57 KrWG (German Resource Circulation Act) RECOM Recycling GmbH
CERTIFICATE The company RECOM Recycling GmbH fulfils at its place of business the requirements of the Ordinance on Specialised Waste Management Companies (Entsorgungsfachbetriebeverordnung - EfbV) dated
Copper & Copper Alloys CuZn38Pb2 (OF 2361)
Copper and Copper Alloys Heiligenstraße 70 41751 Viersen Phone +49 2162 956-6 FAX +49 2162 956-762 duelken@otto-fuchs.com Page 1 of 5 no responsibility is taken for the correctness of this information
5072 CHEMISTRY (NEW PAPERS WITH SPA) TOPIC 9: METALS 5067 CHEMISTRY (NEW PAPERS WITH PRACTICAL EXAM) TOPIC 9: METALS
5072 CHEMISTRY (NEW PAPERS WITH SPA) TOPIC 9: METALS 5067 CHEMISTRY (NEW PAPERS WITH PRACTICAL EXAM) TOPIC 9: METALS SUB-TOPIC 9.3 TO 5 EXTRACTION OF METALS; RECYLING OF METALS; IRON LEARNING OUTCOMES
NATIONAL CERTIFICATE (VOCATIONAL) NQF LEVEL 3 NOVEMBER
MARKING GUIDELINE NATIONAL CERTIFICATE (VOCATIONAL) NQF LEVEL 3 NOVEMBER 2009 This memorandum consists of 5 pages. MARKING GUIDELINE -2- NC1520(E)(N3)/V QUESTION 1: GENERAL 1.1.1 True 1.1.2 True 1.1.3
Engineering Materials
Engineering Materials Module 1: Introduction to Engineering Materials PREPARED BY IAT Curriculum Unit August 2010 Institute of Applied Technology, 2010 2 Module 1: Introduction to Engineering Materials
Copper & Copper Alloys CuZn37Mn3Al2Si (OF 2291)
Copper and Copper Alloys Page 1 of 5 No responsibility is taken for the correctness of this information 05/2014 Cu Zn Pb Sn Fe Mn Ni Al Si As Co Cr Others min. 58 Rem. - 0.1 0.35 1.8-1.4 0.6 - - - - max.
CORROSION & ITS CONTROL -Content. Introduction Classification Galvanic series Factors affecting Protection methods Summary
CORROSION & ITS CONTROL -Content Introduction Classification Galvanic series Factors affecting Protection methods Summary 3 Learning Objectives At the end of the chapter the learner will be able to; 1.
BEAR FORCE AND RELIABILITY
Over Years BEAR FORCE AND RELIABILITY HORIZONTAL SHREDDER RLZ - RHZ and RHZ plus Shredders with link chain feed, the RHZ 400-1300 plus series RHZ plus series horizontal shredders are used to shred long
SCRAP SPECIFICATIONS CIRCULAR
SCRAP SPECIFICATIONS CIRCULAR 2016 GUIDELINES FOR NONFERROUS SCRAP FERROUS SCRAP GLASS CULLET PAPER STOCK PLASTIC SCRAP ELECTRONICS SCRAP TIRE SCRAP EFFECTIVE 11/5/2016 Rules Governing the Procedures for
Copper and Aluminium Wire Drawing Lubricants
Copper and Aluminium Wire Drawing Lubricants Copper and Copper Alloys BECHEM Unopol the worldwide recognized brand for highest performance Designed for highest lubrication and surface quality the BECHEM
50948-RHN Putney. Friday, 15 December This document includes: Code Section Revision Dated
50948-RHN Putney Friday, 15 December 2017 This document includes: Code Section Revision Dated Z11 Purpose made metalwork 1 Table of Contents Title Z11 Purpose made metalwork Page 3 Z11 Purpose made metalwork
Key Points. ATOMIC STRUCTURE Atom: the smallest part of an element that still has the characteristics/ properties of that element.
The Periodic Table Learning Objective Red Yellow Green Date Completed OC3 understand what an element is and recall that all known elements are listed in the Periodic Table; (also know how to use the Table;
innovative system solutions METTOP GmbH Peter-Tunner-Strasse Leoben AUSTRIA
innovative system solutions METTOP GmbH Peter-Tunner-Strasse 4 8700 Leoben AUSTRIA office@mettop.com Leoben, Austria METTOP GmbH is an Austrian engineering company. The company focuses on providing metallurgical
resource mining metals from bottom ash of municipal solid waste incinerators
resource mining metals from bottom ash of municipal solid waste incinerators ~20 % 100% Waste Overview Bottom ash ~80 % less volume Bottom ash 17th November 2015 23rd International Recycled Aluminium Conference
Copper & Copper Alloys CuZn38As (OF 2765)
Copper and Copper Alloys Page 1 of 5 no responsibility is taken for the correctness of this information 04/2014 Cu Zn Pb Sn Fe Mn Ni Al Si As Co Cr Others min. 61.5 Rem. - - - - - - - 0.02 - - - max. 63.5-0.2
INSPECTION. Disk seat worm Mold parting. Replacement Good Required
INSPECTION A. WELD MOLD INSPECTION The mold is designed to last for an average of 50 connections. This will vary according to the care taken during the installation process. Inspect the mold regularly.
Presentation on Chip Compactor
Yuken India Limited A Group Company of Yuken Kogyo Co. Limited, Japan Presentation on Chip Compactor H.S.Praveen Kumar, AGM, Machine Tool Division Comprehensive Hydraulic Solutions CONTENTS YUKEN INDIA
ELV Stakeholder Consultation ECO BRASS
4-7-35, Kita-Shinagawa, Shinagawa-ku, TOKYO 140-8550 TEL +81-3-5449-2511 // FAX +81-3-5449-2525 ELV Stakeholder Consultation ECO BRASS ECO BRASS was developed as a Pb-free copper alloy and total sales
Technical and regulatory challenges in the copper recycling industry
EUMICON 2015 5 th and 6 th May 2015, Linz Technical and regulatory challenges in the copper recycling industry Dr. Stefan Priggemeyer Corporate EHS and Standardization Affairs Business Groups and Product
h Reclamation Center Lot Number List
h Reclamation Center Lot Number List Lot #Description Base Metal Primary PM 0 Mixed Material and Computers Mixed 1 IC device w/encapsulation, plastic - Malaysia Copper Gold 2 IC device w/encapsulation,
Electroplating. Copyright 2016 Industrial Metallurgists, LLC
Electroplating Northbrook, IL 847.528.3467 www.imetllc.com Copyright 2016 Industrial Metallurgists, LLC Course content 1. Process Steps (75 minutes) 2. Properties, Defects, and Evaluation (60 minutes)
High-powered and compact
Entsorgungstechnik High-powered and compact Single-shaft shredders, RLZ, RHZ and RHZ plus series RHZ 1000 plus RLZ 400 e conomical robust powerful The horizontal shredders series RHZ are used in medium-
Lead in Your Drinking Water. Lead from plumbing components
Lead in Your Drinking Water Lead (Pb) is an extremely toxic heavy metal that unfortunately occurs widely in our environment. The chief sources of exposure are from (1) Lead paint commonly present in the
N OTHING IS M ORE IM PORTA NT THA N THE ENVIRONM ENT A ROUND US. WE A RE A LL A WA RE OF THE DA NGERS OF EX HA USTING OUR NA TURA L
Pyral AG N OTHING IS M ORE IM PORTA NT THA N THE ENVIRONM ENT A ROUND US. WE A RE A LL A WA RE OF THE DA NGERS OF EX HA USTING OUR NA TURA L RESOURCES A ND THE CONTINUED THREA T THA T THE RELEA SE OF C02
Types of Metal Alloys
Types of Metal Alloys Metal alloys Ferrous Nonferrous Steels Cast iron 257 Uses low carbon
ABB industrial drives. Recycling instructions and environmental information ACS drives
ABB industrial drives Recycling instructions and environmental information ACS880-0 drives List of related manuals Drive hardware manuals and guides ACS880-0 drives recycling instructions environmental
I. PHYSICAL PROPERTIES. PROPERTY METALS NON-METALS 1.Lustre Metals have shining surface. They do not have shining surface.
Elements can be classified as metals and non-metals on the basis of their properties. Example of some metals are : Iron (Fe), Aluminium (Al), Silver (Ag), Copper (Cu) Examples of some non-metals are :
Guideline For Waste Treatment/Recycling By Businesses
Guideline For Waste Treatment/Recycling By Businesses July 12, 2001 Waste Recycling Subcommittee Industrial Structure Council 1. Iron and steel industry Given that the iron and steel industry is designated
Chapter 73. Articles of iron or steel
Chapter 73 Articles of iron or steel Notes. 1.- In this Chapter the expression cast iron applies to products obtained by casting in which iron predominates by weight over each of the other elements and
COUNCIL REGULATION (EU)
EN L 94/2 Official Journal of the European Union 8.4.2011 REGULATIONS COUNCIL REGULATION (EU) No 333/2011 of 31 March 2011 establishing criteria determining when certain types of scrap metal cease to be
Engineering Materials
Engineering Materials Learning Outcome When you complete this module you will be able to: Describe the mechanical properties of ferrous and non-ferrous engineering materials, plus the effects and purposes
Coating Thickness Gauge TG-100 series Applications: F Type Magnetic induction: Can measure the thickness of non-magnetic coating layers on magnetic substrate Such as: (aluminum, chrome, copper, enamel,
TIG Welding Machine. Introduction Risks & Hazards General Safety Operating Safety Maintenance Operating Procedures
TIG Welding Machine This is a RESTRICTED item in NSW DET schools, where TEACHER USE ONLY is permitted. In VIC DEECD schools, this item can only be used by students under general supervision after the student
Product list PRODUCT CATEGORIES ACCEPTED AT THE EVENT
PRODUCT CATEGORIES ACCEPTED AT THE EVENT A) Producers, distributors, traders, service centres, agents, purchase groups and users of the following products: 1. Iron ores and derivatives 1.1. Magnetite 1.2.
Industrial Rolled Copper and Copper Alloy Products
KME Germany GmbH & Co. KG Copper and Copper Alloy Products [EN] Industrial Rolled Copper and Copper Alloy Products KME Germany GmbH & Co. KG KME and copper Our modern world would be impossible without
Oman College of Management & Technology COURSE NAME: MATERIALS SCIENCE PROPOSED BY: DR.MOHAMED ALNEJEM SEMESTER: SECOND 2015/2016 CHAPTER (7): METALS
Oman College of Management & Technology COURSE NAME: MATERIALS SCIENCE PROPOSED BY: DR.MOHAMED ALNEJEM SEMESTER: SECOND 2015/2016 CHAPTER (7): METALS 1 CHAPTER 7 : 2 METALS 3 Which of these things are
Outline SIX marking out tools used in sheet metal work.
NATIONAL BUSINESS AND TECHNICAL EXAMINATIONS BOARD (NABTEB). NATIONAL TECHNICAL CERTIFICATE EXAMINATION FABRICATION/WELDING (051-1) MAY/JUNE 2008 MARKING SCHEME. 1(a) Outline SIX marking out tools used
ABB Drives. Recycling instructions and environmental information ACx drives
ABB Drives Recycling instructions and environmental information ACx580-01 drives List of related manuals Drive hardware manuals and guides Code (English) ACx580-01 drives recycling instructions and environmental
FERROUS RAW MATERIALS MANUAL
GERDAU MIDLOTHIAN, LP 300 WARD ROAD MIDLOTHIAN, TEXAS, 76065 (972) 775-8241 FERROUS RAW MATERIALS MANUAL PART 3 FERROUS RAW MATERIALSPECIFICATIONS Revision 16 Effective May 23, 2018 GERDAU Midlothian Grade
BEAR FORCE AND RELIABILITY HORIZONTAL SHREDDER. RLZ - RHZ and RHZ plus
BEAR FORCE AND RELIABILITY HORIZONTAL SHREDDER RLZ - RHZ and RHZ plus Shredders with link chain feed, 400-1300 RHZ plus series RHZ plus series horizontal shredders are used to shred long and short wood
PARTICLE SORTING OF LIGHT-METAL ALLOYS AND EXPANDED USE OF MANUFACTURING SCRAP IN AUTOMOTIVE, MARINE AND AEROSPACE MARKETS
PARTICLE SORTING OF LIGHT-METAL ALLOYS AND EXPANDED USE OF MANUFACTURING SCRAP IN AUTOMOTIVE, MARINE AND AEROSPACE MARKETS Adam G G C Hartmut Harbeck TiTech GmbH Value-added markets: Al-intensive vehicles
Variation notice with introductory note
Variation notice with introductory note Environmental Permitting (England & Wales) Regulations 2007 Premises at Whitwell Street Associated Waste Management Ltd Victoria Works Barnard Road Bradford West
Scrap Specifications Circular 2012
Rules Governing the Procedures for the Addition, Amendment, or Withdrawal of Specifications...3 Nonferrous Scrap: NF-2012...4 Red Metals...4 Aluminum...7 Zinc...10 Magnesium... 11 Lead... 11 Nickel/Stainless/Hi
Evaluation of microstructure and chosen properties of zinc and its alloys
International Scientific Journal published monthly by the of Achievements in Materials and Manufacturing Engineering World Academy of Materials and Manufacturing Engineering Evaluation of microstructure
Perspectives on European Copper Smelting and Refining. Lisbon, 26th April
Perspectives on European Copper Smelting and Refining International Copper Study Group Lisbon, 26th April Agenda 1. Introduction Aurubis 2. Aurubis Multi-Metal Recycling 3. Challenges 4. Strategy and outlook