All Green Advanced Marine Grade Coatings & Rust Defense Products

Transcription

1 All Green Advanced Marine Grade Coatings & Rust Defense Products

2 MAD Armor Marine Grade Coating MAD (Marine Armor Defense) Products MAD Armor is a cutting-edge marine grade rubber coating that was developed primarily for the commercial marine and cruise line industry for the purposes of: Protection from harsh environmental elements that result in costly repairs Extend the utilization life span of previously elementally degraded substrate MAD Armor has also notably effective within many other industries presenting like challenges and harsh conditions such as processing/management of waste, oil and gas.

3 MAD Armor Uses and Applications MAD Armor has been used to effectively coat, insulate and protect: Hot/cold piping and drains; Flexible insulation; HVAC units, cooling towers, fan rooms, plenums and ducts; Walls, floors and ceilings; Expansion joints; 99% of all substrate materials for purposes of rust/corrosion prevention, waterproofing, energy conservation; Pretty much anything you want to protect for a long time!

4 MAD Armor Benefits All green water based product Hydrophobic surface (water repellent) Ultra high reflectivity (97.3%) Maximum sunlight surface temperature of 106 o F(41 o C) UV stable Flame resistant Acid resistant Rust preventative Low VOC Odorless application Mold & mildew preventative Gas barrier 10 year warranty 1500 psi tensile strength 700% elongation Full spectrum freeze & thaw cycle Snow & ice phobic Single component 5 year shelf life

5 MAD Products Executives coated the roof of a 2016 Nissan NV3500 passenger van with a layer 22 mils thick of MAD Armor and brought it to the hottest places known on the planet, Red Rock Canyon, Nevada and Death Valley, California to put its insulative properties to the test. Let s see how it performed.

6 Red Rock Canyon, Las Vegas, Nevada July 11, Ambient Temperature 103 F.

7 Red Rock Canyon, Las Vegas, Nevada July 11, Ambient Temperature 103 F. As you can see, MAD Armor performed as expected, providing a notably significant heat reduction to the applied surface area of the roof.

8 Death Valley, California July 13, 2016 at approximately 2PM. Ambient temperature 118 F. After sitting for 2 hours, the temperature at the crosshairs, according to the Thermal Camera image, was 172 F. The roof of the van, coated with MAD Armor, was 92 F. An 80 degree F. difference!!! COOL enough to stand on BAREFOOT.

9 Death Valley, California July 13, 2016 at approximately 2PM. After a few minutes on the roof, even the flip flops heated up to 152 F, the MAD Armor coating stayed cool.

10 MAD Armor vs Leading Products Imron Marine Awlgrip MAD Armor Uses Coat Substrate Coat Armor Flex Coat HVAC Units Coat Cooling Towers Coat Fan Rooms Coat Plenums Coat Air Ducts Paint Walls Paint Floors Paint Ceilings Paint Hot/Cold Pipes Paint Expansion Joints Aluminum/Steel only Fiberglass only 99% of all substrates

11 MAD Armor vs Leading Products Imron Marine Awlgrip MAD Armor Performance Component Two Two One Water Repellent Reflectivity ~80-89% ~80-89% 97.3% Max Sun Surface Temp Above 105 o F(40 o C) Above 105 o F(40 o C) Max 106 o F(40 o C) UV Stable Up To 3 Years Up To 4 Years Up To 10 Years Flame Resistant Acid Resistant Rust Preventative Up To 3 Years Up To 4 Years Up To 10 Years VOC Very High Low Very Low Odorless Mold/Mildew Prevent Gas Barrier Warranty 3 Year Limited 4 Year 10 Year Use Below Water Line Tensile Strength 1500 PSI Elongation zero 700% Full Spectrum Freeze/Thaw Snow/Ice Phobic Shelf Life Cost per Gallon 1 Year $279 Part A; $134 Part B $111 Reducer = $524 3 Year $184; $129 Converter $42.95 Reducer = $ Year $349* MSRP

12 MAD Armor vs Leading Products SW Macor SW Emerald Ext. BM Ragal MAD Armor 646 Epoxy Acrylic Gloss Water Select Uses Paint Substrate Paint Armor Flex Paint HVAC Units Paint Cooling Towers Paint Fan Rooms Paint Plenums Paint Air Ducts Paint Walls Paint Floors Paint Ceilings Paint Hot/Cold Pipes Paint Expansion Joints

13 MAD Armor vs Leading Products SW Macor SW Emerald Ext. BM Ragal MAD Armor Performance 646 Epoxy Acrylic Gloss Water Select Component Two One One One Water Repellent Reflectivity ~80-89% ~80-89% ~80-89% 97.3% Max Sun Surface Temp Above 105 o F(40 o C) Above 105 o F(40 o C) Above 105 o F(40 o C) Max 106 o F(40 o C) UV Stable Up To 1 Year Up To 3 Years Up To 3 Years Up To 10 Years Flame Resistant Acid Resistant Rust Preventative Up To 1.3 Years Up To 10 Years VOC Low Low Low Very Low Odorless Mold/Mildew Prevent Gas Barrier Warranty None 5 Years 5 Years 10 Years Use Below Water Line Tensile Strength Less Than 300 PSI Less Than 300 PSI Less Than 300 PSI 1500 PSI Elongation Zero Less Than 300% Less Than 300% 700% Full Spectrum Freeze/Thaw Snow/Ice Phobic Shelf Life 3 Years 1 Year 1 Year 5 Years Cost per Gallon $147 Part A; $147 Part B; $18 Reducer = $312 $76.99 $71.00 $349* MSRP

14 MAD Armor In the aforementioned side-by-side comparisons to other industry coatings, MAD Armor is far superior in the following areas: Ease of use Shelf life Applicability Durability Flexibility and elongation Longevity Environmental stability Cost

15 Our Product Line

16 MAD Defense Uses, Application & Benefits MAD Defense is a specialty rust converter and primer. It is used to treat, coat and protect existing rust problems. Application/Uses Applies directly over the rust area Converts rust to non-corrosive substrate Benefits All green water based product No need for surface prep (lower labor cost) Integrity of metal Flame resistant Rust preventative Low VOC Odorless application Single component 1 year shelf life

17 MAD Bond Uses, Application & Benefits MAD Bond is a specialty bonding agent and primer, used to coat porous substrates for priming of topcoat. Application/Uses Applies directly over porous substrates to enhance adhesion of Mad Guard Benefits All green water based product No need for surface prep Flame resistant Low VOC Odorless application Single component 5 year shelf life

18 MAD Shark Uses and Applications MAD Shark is an advanced water-proof non-skid marine grade flooring. MAD Shark can also be used for any area that requires an abrasive coating. MAD Shark can be used to coat, insulate and protect: Floors (kitchen, service area, fan rooms, generator rooms, walkways) Pretty much anything you need to have a non-skid coating on

19 MAD Shark Benefits All green water based product Hydrophobic surface (water repellent) Ultra high reflectivity (97.3%) Maximum sunlight surface temperature of 105 o (40 o C) UV stable Flame resistant Acid resistant Rust preventative Low VOC Odorless application Mold & mildew preventative Gas barrier 10 year warranty 10,000 psi tensile strength Full spectrum freeze & thaw cycle Snow & ice phobic Single component 5 year shelf life

20 DISTRIBUTOR for BRITEWORKS GLOBAL Products M&M Marine Surfaces, LLC Mike Frank Tel: