Valid from April 9 until August 30, Imperial Version OFFERS SPECIAL INNOVATION 2018 MACHINING. TELLIGENTLY

Transcription

1 Valid from April 9 until August 30, 08 Imperial Version SPECIAL OFFERS INNOVATION 08 MACHINING 4.0 INDUSTRY TELLIGENTLY

2 INNOVATION 08 Tangential Cost Effective Insert with 8 Cutting Edges for 90 0 Shoulder Milling 8 The LOGIQ-8-TANG tangential 8 cutting edged insert for 90 rough milling features a huge wiper suitable for steel and cast-iron applications. Firm placement of the insert due to its dovetail shape ensures high feed and durability when working under extreme cutting conditions. The tangential mounting of the insert reduces forces on the insert screw and eliminates shearing forces Tangential Advantage Large Body Core Performs 90 Shoulder Dovetail 8 Cutting Edges 40 T890 LNHT 3 Assorted Inserts Receive 50% on the Corresponding Face Mill Cutter, (T890HT FLN) up to 5" Valid from April 9 until August 30, 08

3 T890HT FLN-R3 90 Face Mills Carrying T890 LN.T Tangentially Clamped Inserts with 8 Cutting Edges DHUB DCOMNS DC OAL Designation DC CICT () DCONMS DHUB OAL Arbor WT () T890HT FLND R A.39 T890HT FLND R A.39 T890HT FLND R A.39 T890HT FLND R A.78 T890HT FLND R A.78 T890HT FLND R A.8 T890HT FLND R A.40 T890HT FLND R A.4 T890HT FLND R A.4 T890HT FLND R B.8 T890HT FLND R B.8 T890HT FLND R B.90 T890HT FLND R B 3.43 T890HT FLND R B 3.6 T890HT FLND R B 5.34 T890HT FLND R B 5.85 () Number of inserts () Item weight Fig. Fig. T890 LN.T 306 Tangentially Clamped Inserts with 8 Cutting Edges LE INSL W RE/CHWx45 Dimensions Tough Hard Recommended Machining Data IC845 IC830 IC5400 IC5500 IC808 IC80 a p (inch) f z (inch/t) Designation LE INSL W RE CHW Fig. T890 LNHT 306PNTR T890 LNAT 306PN-W () () A wiper insert (.3" long), 4 cutting edges, for finishing only 50% ADDITIONAL DISCOUNT 3

4 INNOVATION 08 The Smallest Helical Indexable Multi-Toothed Endmill for 90º Shoulder Milling 3 30 X Magnified High Positive Rake Large Diameter Core Performs 90 Shoulder Cost Effective Insert HM390 TPKT 05 Helical Cutting Edges 0 HM390 TPKT 05/TCKT 07/TPKT 0/TDKT 5 Assorted Inserts Receive 50% on the Corresponding Endmill Cutter (HM390 ETC/ETP/ETD) up to.5" 40 HM390 TCKT 07/TPKT 0/TDKT 5 Assorted Inserts Receive 50% on the Corresponding Face Mill Cutter, (HM390 FTC/FTP/FTD) up to 5" 4 Valid from April 9 until August 30, 08

5 DRVS HM390 ETP-MM Endmills with a MULTI-MASTER Threaded Adaptation Carrying HM390 TPKT Triangular Inserts DC LF OAL THSZMS DCONMS Designation DC CICT () LF DCONMS THSZMS OAL DRVS () RMPX (3) WT (4) HM390 ETPD MMT T HM390 ETPD.6-04-MMT T Tightening torque 4.4 lbf*in () Number of inserts () Key flat size (3) Ramping angle maximum (4) Item weight HM390 TPKT 050 Triangular Inserts with 3 Helical Cutting Edges for 90 Shoulder Accuracy IC L S BS RE Dimensions Tough Hard Recommended Machining Data a p f z Designation L IC S LE RE BS (inch) (inch/t) HM390 TPCT 050PDR HM390 TPKT 050PDR IC830 IC808 IC % ADDITIONAL DISCOUNT 5

6 NANMILL NANO ENDMILL INNOVATION 08 Smallest Indexable Insert Combined with Small Diameter Multi-Toothed Endmill for 90 Shoulder Milling 3 Extra Positive Cutting Edge Very Strong and Durable Insert New Generation Insert Performs 90 Shoulder 5 X Magnified 0 HM390 TPKR 04 Assorted Inserts Receive 50% on the Corresponding Endmill Cutter (HM390 ETP -04) up to 0.38" 30 HM390 TPKR 04 Assorted Inserts Receive Corresponding Endmill Cutter, (HM390 ETP -04) up to 0.38" Free of Charge 6 Valid from April 9 until August 30, 08

7 HM390 ETP Small Diameter Endmills Carrying HM390 TPKR 040 Triangular Inserts with 3 Helical Cutting Edges DC LH OAL DCONMS Designation DC CICT () OAL LH DCONMS Shank () RMPX (3) WT (4) HM390 ETP D.3--C C HM390 ETP D.38-3-C C.6.09 Tightening torque 4 lbfx*in () Number of inserts () C-Cylindrical (3) Ramping angle maximum (4) Item weight DRVS DC HM390 ETP-MM Endmills with a MULTI-MASTER Threaded Adaptation Carrying HM390 LF OAL TPKR Triangular Inserts Designation DC CICT () LF DCONMS THSZMS OAL DRVS () RMPX (3) WT (4) HM390 ETP D.3--MMT T HM390 ETP D.38-3-MMT T Tightening torque 4 lbf*in. () Number of inserts () Key flat size (3) Ramping angle maximum (4) Item weight THSZMS DCONMS HM390 TPKR 040 Triangular Miniature Inserts with 3 Helical Cutting Edges for 90 Shoulders IC LE L S BS RE Dimensions Recommended Machining Data a p f z Designation L IC S LE RE BS (inch) (inch/t) HM390 TPKR 040-PCTR IC830 3 SPECIAL OFFERS 7

8 HIGH FEED Square Insert for High Feed Face Milling with Higher Productivity INNOVATION Reinforced Insert Radius For Stainless Steel, Cast Iron & Exotic Materials Positive Insert Positioning Interrupted Cut 4 Cutting Edged Square Insert 0 FFQ4 SOMT 09 Assorted Inserts Receive 50% on the Corresponding Endmill Cutter (FFQ4 D...-09) up to.5" 30 FFQ4 SOMT 09//7 Assorted Inserts Receive 50% on the Corresponding Face Mill Cutter, (FFQ4 D...) up to 6" 8 Valid from April 9 until August 30, 08

9 HIGH FEED FFQ4 SOMT 09 Assorted Inserts Receive Corresponding Endmill Cutter FFQ4 D -09 up to.5" Free of Charge 60 FFQ4 SOMT 09//7 Assorted Inserts Receive Corresponding Face Mill Cutter, FFQ4 D -09//7 up to 6" Free of Charge INNOVATION SPECIAL OFFERS 9 Valid from April 9 until August 30, 08

10 FFQ4 D-W-09 Fast Feed Endmills Carrying Single- Sided Inserts with 4 Cutting Edges DCX DC LH OAL DCONMS Designation DC DCX AE CICT () LH OAL DCONMS RMPX () WT (3) FFQ4 D W FFQ4 D W FFQ4 D W FFQ4 D W Radius for programming." () Number of inserts () Ramping angle maximum (3) Item weight LF FFQ4 D-M-09 Fast Feed Endmills with FLEXFIT Threaded Adaptation Carrying Single- Sided Inserts with 4 Cutting Edges DCX DC THSZMS DCONMS Designation DC DCX AE CICT () LF OAL DCONMS THSZMS RMPX () WT (3) FFQ4 D M M Radius for programming.098" () Number of inserts () Ramping angle maximum (3) Item weight FFQ4 D-09 Fast Feed Face Mills Carrying Single- Sided Inserts with 4 Cutting Edges DHUB DCONMS DC DCX OAL Designation DC DCX AE CICT () OAL DCONMS DHUB RMPX () WT (3) FFQ4 D FFQ4 D FFQ4 D Radius for programming." () Number of inserts () Ramping angle maximum (3) Item weight FFQ4 SOMT 0904 Square Single-Sided Inserts with 4 Cutting Edges for Fast Feed Milling RE L S Dimensions Tough Hard Recommended Machining Data a p f z Designation L S RE (inch) (inch/t) FFQ4 SOMT 0904T FFQ4 SOMT 0904RM-T FFQ4 SOMT 0904HP T - type for steel, ferritic and martensitic stainless steel, cast iron and hardened steel RM-T type for interrupted cut and machining near straight shoulders on steel, ferritic and martensitic stainless steel, cast iron and hardened steel HP- type for austenitic stainless steel and high temperature alloys IC88 IC830 IC580 IC808 IC80 0

11 FFQ4 D- Fast Feed Face Mills Carrying Single- Sided Inserts with 4 Cutting Edges DHUB DCONMS Designation DC DCX AE CICT LF DHUB DCONMS Arbor RMPX WT FFQ4 D A.6.88 FFQ4 D A.7.30 FFQ4 D A.3.7 FFQ4 D B.9.9 FFQ4 D B Radius for programming." DC DCX AE 9 OAL FFQ4 SOMT 05 Square Single-Sided Inserts with 4 Cutting Edges for Fast Feed Milling RE L S Dimensions Tough Hard Recommended Machining Data a p f z Designation L S RE (inch) (inch/t) FFQ4 SOMT 05RM-HP FFQ4 SOMT 05RM-T FFQ4 SOMT 056HP FFQ4 SOMT 056T FFQ4 SOMT 056T RM-HP- for interrupted cut and machining next to shoulders of austenitic stainless steel and high temperature alloys RM-T- for interrupted cut and machining next to shoulders of steel, ferritic and martensitic stainless steel, cast iron and hardened steel HP- for austenitic stainless steel and high temperature alloys T- for steel, ferritic and martensitic stainless steel, cast iron and hardened steel T0- for grey and nodular cast iron IC88 IC830 IC580 IC808 IC80 50% ADDITIONAL DISCOUNT

12 FFQ4 D-7 Fast Feed Face Mills Carrying Single- Sided Inserts with 4 Cutting Edges DHUB DCONMS DC DCX 4 OAL Designation DCX DC AE () CICT () OAL DCONMS DHUB RMPX (3) WT (4) FFQ4 D FFQ4 D FFQ4 D FFQ4 D Radius for programming.7" () Plunging width () Number of inserts (3) Ramping angle maximum (4) Item weight FFQ4 SOMT 706 Square Single-Sided Inserts with 4 Cutting Edges for Fast Feed Milling RE L S Dimensions Tough Hard Recommended Machining Data a p f z Designation L S RE (inch) (inch/t) FFQ4 SOMT 706RM-T () FFQ4 SOMT 7065HP () FFQ4 SOMT 7065T (3) () For interrupted cut and machining next to shoulders on steel, stainless steel, cast iron and hardened steel () For austenitic stainless steel and high temperature alloys (3) For steel, ferritic and martensitic stainless steel, cast iron and hardened steel IC88 IC830 IC808 IC % ADDITIONAL DISCOUNT

13 INNOVATION O 08 Twisted Shape Insert for High Feed Milling Guarantees Higher Productivity 3 4 High Feed Milling Large Body Core Ensures Stability and Rigidity High Positive Rake Angle Double Sided Insert 0 FFX4 XNMU 04 Assorted Inserts Receive 50% on the Corresponding Endmill Cutter (FFX4 ED -04) up to.5" 30 FFX4 XNMU 04 Assorted Inserts Receive 50% on the Corresponding Face Mill Cutter, (FFX4 FD -04) up to.5" Unique Insert Shape 3 Valid from April 9 until August 30, 08

14 FFX4 XNMU 04 Assorted Inserts Receive Corresponding Endmill Cutter (FFX4 ED -04) up to.5" Free of Charge 60 FFX4 XNMU 04 Assorted Inserts Receive Corresponding Face Mill Cutter, (FFX4 FD -04).5" Free of Charge INNOVATION 08 SPECIAL OFFERS 4 Valid from April 9 until August 30, 08

15 FFX4 ED Endmills Carrying Small Double- Sided "Bone Shape" Inserts with 4 Cutting Edges for Fast Feed Milling OAL LH DCX DC DCONMS 7 Designation DCX DC CICT () LH OAL DCONMS Shank () RMPX (3) WT (4) FFX4 ED W W FFX4 ED W W FFX4 ED W W FFX4 ED W W.9.44 FFX4 ED W W.9.50 FFX4 ED W W.8.0 FFX4 ED W W.8.03 FFX4 ED W W.. FFX4 ED W W..50 Radius for programming.07" () Number of inserts () W - Weldon (3) Ramping angle maximum (4) Item weight DCX DC THSZMS DCONMS FFX4 ED-MM Endmills with MULTI-MASTER Adaptation Carrying Small "Bone 7 DRVS Shape" Inserts with 4 Cutting Edges for Fast Feed Milling LF OAL Designation DCX DC CICT () THSZMS LF OAL RMPX () DCONMS DRVS (3) WT (4) FFX4 ED6/.63--MMT T Radius for programming.07" () Number of inserts () Ramping angle maximum (3) Key flat size (4) Item weight LF OAL FFX4 ED-M Endmills with FLEXFIT Adaptation Carrying Small "Bone Shape" Inserts with 4 Cutting Edges for Fast Feed Milling DCX DC KAPR DRVS THSZMS DCONMS Designation DCX DC CICT () THSZMS LF OAL RMPX () DCONMS DRVS (3) WT (4) FFX4 ED0/.78-3-M M FFX4 ED5/.98-4-M M FFX4 ED3/.6-5-M M FFX4 ED35/.38-5-M M Radius for programming.07" () Number of inserts () Ramping angle maximum (3) Key flat size (4) Item weight SPECIAL OFFERS 5

16 FFX4 FD Face Mills Carrying Small "Bone Shape" Inserts with 4 Cutting Edges for Fast Feed Milling OAL DHUB DCONMS DC DCX 7 Designation DCX DC CICT () OAL DHUB DCONMS RMPX () WT (3) FFX4 FD Radius for programming.07" () Number of inserts () Ramping angle maximum (3) Item weight RE S FFX4 XNMU Small "Bone Shape" Inserts with 4 Cutting Edges for Fast Feed Milling INSL W Dimensions Tough Hard Recommended Machining Data a p f z Designation INSL S RE W (inch) (inch/t) FFX4 XNMU 04030HP FFX4 XNMU 04030T HP- for austenitic stainless steel and high temperature alloys T- for steel, ferritic and martensitic stainless steel, cast iron and hardened steel IC88 IC840 IC830 IC580 IC808 IC80 SPECIAL OFFERS 6

17 INNOVATION 08 Smallest Indexable Insert Combined with Small Diameter Multi-Toothed Endmill for High Feed and Productivity 3 High Feed Milling Very Strong and Durable Insert High Ramp Down Angle Easy Chip Evacuation 0 X Magnified 0 FFT3 TXMT 0 Assorted Inserts Receive 50% on the Corresponding Endmill Cutter (FFT3 EFM -0) up to 0.39" 30 FFT3 TXMT 0 Assorted Inserts Receive Corresponding Endmill Cutter, (FFT3 EFM -0) up to 0.39" Free of Charge 7 Valid from April 9 until August 30, 08

18 FFT3 EFM-MM 0 Small Diameter Endmills with a MULTI-MASTER Threaded Adaptation Carrying Triangular Inserts for Fast Feed Milling DCX DC 4 LF OAL THSZMS DCONMS Designation DCX DC CICT () LF DCONMS THSZMS OAL DRVS () RMPX (3) WT (4) FFT3 EFMD08/.3-MMT T FFT3 EFMD0/.39-3MMT T Radius for programing.043 inch () Number of inserts () Key flat size (3) Ramping angle maximum (4) Item weight FFT3 TXMT 0 Triangular Miniature Inserts for Fast Feed Machining at Small Depth of Cut RE IC S S INSL Dimensions Recommended Machining Data a p f z Designation INSL IC RE S S (inch) (inch/t) FFT3 TXMT 0005T IC830 3 SPECIAL OFFERS 8

19 INNOVATION 08 Small Diameter Multi-Toothed Endmill for High Feed and Productivity 3 High Feed Milling High Positive Rake Angle High Productivity Through-Tool Coolant 30 X Magnified 0 FFT3 WXMT 03 Assorted Inserts Receive 50% on the Corresponding Endmill Cutter (FFT3 EFM -03) up to 0.65" 30 FFT3 WXMT 03 Assorted Inserts Receive Corresponding Endmill Cutter, (FFT3 EFM -03) up to 0.65" Free of Charge 9 Valid from April 9 until August 30, 08

20 FFT3 EFM-03 Endmills Carrying Single-Sided Small Trigon Inserts for Fast Feed Milling 7 A DCX DC A LH OAL DCONMS Designation DCX DC CICT () LH OAL DCONMS Shank () RMPX (3) WT FFT3 EFMD C C FFT3 EFMD C C FFT3 EFMD C C.5.40 Radius for programming.043" () Number of inserts () W - Weldon (3) Ramping angle maximum FFT3 EFM-MM 03 Endmills with a MULTI-MASTER Threaded Adaptation Carrying Single-Sided Small Trigon Inserts for Fast Feed Milling OAL LF DCX DC THSZMS DCONMS DRVS Designation DCX DC CICT () LF DCONMS THSZMS OAL DRVS () RMPX (3) WT (4) FFT3 EFMD0/.39-MMT T FFT3 EFMD/.47-3MMT T FFT3 EFMD6/.63-4MMT T Radius for programming.043" () Number of inserts () Key flat size (3) Ramping angle maximum (4) Item weight FFT3 WXMT 03 Single-Sided Small Trigon Inserts for Fast Feed Milling IC S RE 7 Dimensions Tough Hard Recommended Machining Data a p f z Designation IC S RE (inch) (inch/t) FFT3 WXMT 03006T IC830 IC808 3 SPECIAL OFFERS 0

21 INDEXABLE HEADS New Long Flute Multi-Master Heads Length Ratio.5xD INNOVATION 08 Ease of Use Different Types of Materials Roughing Semi-Finishing & Finishing Cost Effective Insert 4 (any assortment) New Multi-Master Heads.5XD Receive 5% 6 (any assortment) New Multi-Master Heads.5XD Receive 0% No Setup Time Valid from April 9 until August 30, 08

22 MM EC-CF-Z7/9-.5xD Interchangeable 7, 9 Flute Solid Carbide Endmill Heads 36 Helix with.5xd Flute Lengths DCe8 RE LF THSZMS FHA DCONMS Dimensions Recommended Machining Data f z Designation DC NOF () RE THSZMS DCONMS LF FHA RMPX () (inch/t) MM EC3H47R05-7T T MM EC375H56R05-7T T MM EC500H75R05-7T T MM EC65H94R03-9T T MM EC750HR03-9T T MM EC.0H50R03-9T T Do not apply lubricant to the threaded connection. () Number of flutes () Ramping angle maximum IC908 RE THSZMS MM EC-CF-Z4-.5xD Interchangeable Solid Carbide Endmill Heads with.5xd Flute Lengths for Chatter Free Roughing and Finishing DCe8 Dimensions LF FHA DCONMS Recommended Machining Data f z Designation DC NOF () RE THSZMS DCONMS LF FHA (inch/t) MM EC3H47R05CF-4T T MM EC375H56R05CF-4T T MM EC500H75R05CF-4T T MM EC65H94R05CF-4T T MM EC750HR03CF-4T T MM EC.0H50R03CF-4T T Do not apply lubricant to the threaded connection. () Number of flutes IC908 MM ERS-.5xD Interchangeable Solid Carbide Rough Milling Heads with.5xd Flute Lengths for High Metal Removal Rates CHW DCe9 THSZMS DCONMS LF FHA Dimensions Recommended Machining Data f z Designation DC NOF () CHW THSZMS DCONMS LF FHA RMPX () (inch/t) MM ERS3B47-4T T MM ERS375B56-4T T MM ERS500B75-4T T MM ERS65B94-5T T MM ERS750B-6T T MM ERS.0B50-6T T Do not apply lubricant to the threaded connection. () Number of flutes () Ramping angle maximum IC908

23 The One and Only Double-Sided Twisted Parting Insert with no Depth of Cut Limitation In addition to highly efficient parting inserts in single and double-ended conventional configurations, ISCAR offers a unique double-ended twisted geometry for unlimited depth of penetration. The DO-GRIP ranges also include the largest choice of parting widths available in today's market, covering all applications. ISCAR offers a wide variety of chipformers and the most advanced grades to ensure unbeatable performance and extended tool life. 0 DGN/L/R.4//3/4/5 Assorted Inserts Receive Corresponding Blade, DGFH (6/3) OR Integral Holder* DGTR/L at 50% * JHP Holders are not included 3 Valid from April 9 until August 30, 08

24 ISCAR's single-ended insert for parting, with an improved clamping method (patent pending) Very rigid clamping in a tangentially oriented pocket. Enables machining at high feed rates and provides excellent straightness and surface finish. Recommended for parting also large diameter parts and for interrupted cuts. Offers a free, unobstructed chip flow, since there is no upper jaw as in the other clamping systems 0 TAG.4//3/4/5/6 Assorted Inserts Receive 50% Corresponding Blade, TGFH 6/3 or TGSU 35 OR Integral Holder* TGTL/R at 50% * JHP Holders are not included 4 Valid from April 9 until August 30, 08

25 The SUMOCHAM drill line comprises a revolutionary clamping system for precise machining and high productivity. The wide variety of exchangeable heads provides solutions for drilling all kind of materials and all types of applications. The SUMOCHAM is the most productive profitable solution for the holemaking industry. 6 ICP/ICK/ICM/HCP/FCP/ICG/QCP, Assorted Inserts (of the same size) + Corresponding Drill Body Receive e 0% on the whole package- tool and inserts, up to 8XD OFFERS SPECIAL Please contact the Salesman for a Free SUMOCHAM drill body offer 5 Valid from April 9 until August 30, 08

26 More flutes in relation to cutting diameter, spiral flutes reduce cutting forces Sharp ground helical cutting edges Low cutting forces Short machining time Thread diameter accuracy adjustment Bottom thread relief not required No problem with broken taps Thread milling next to bottom of blind hole Excellent and controlled thread surface finish One tool is suitable for various thread milling profiles Easy and efficient machining for thread milling on CNC milling centers Solid Carbide Mill Thread Assorted Tools Receive 5% 4 Solid Carbide Mill Thread Assorted Tools Receive 5% 6 Valid from April 9 until August 30, 08

27 INNOVATION 08 Double Sided Insert with 4 Positive Cutting Edges ISCAR introduces new double-sided inserts with 4 unique cutting edges as an advantageous alternative to the conventional ISO standard positive inserts with cutting edges. 3 Medium Finish Double Sided Dovetail Positive Rake Insert Insert 4 0 CXMG Assorted Inserts Receive 50% on the Corresponding External Holder * JHP Holders are not included 7 Valid from April 9 until August 30, 08

28 CXMG-F3P 80 Double-Sided and Double- Positive Inserts with a Positive Rake for Finishing on Alloyed Steel L IC S 95º 95º 95º RE Dimensions Recommended Machining Data a p f Designation L IC S RE (inch) (IPR) CXMG T504-F3P CXMG T508-F3P IC850 CXMG-M3P 80 Double-Sided and Double-Positive Inserts with a Positive Rake for Medium Machining on Alloyed Steel L IC S 95º 95º 95º RE Dimensions Tough Hard Recommended Machining Data Designation L IC S RE CXMG T508-M3P CXMG T5-M3P IC850 IC850 a p (inch) f (IPR) CXMG-F3M 80 Double-Sided and Double-Positive Inserts with a Positive Rake for Finishing on Stainless Steel and H.T.A. L IC S 95º 95º 95º RE Dimensions Tough Hard Recommended Machining Data Designation L IC S RE CXMG T504-F3M CXMG T508-F3M IC605 IC807 a p (inch) f (IPR) 3 50% ADDITIONAL DISCOUNT 4 8

29 CXMG-M3M 80 Double-Sided and Double- Positive Inserts with a Positive Rake for Medium Machining on Stainless Steel and H.T.A. L RE IC S 95º 95º 95º Dimensions Tough Hard Recommended Machining Data Designation L RE S IC CXMG T508-M3M CXMG T5-M3M IC605 IC807 a p (inch) f (IPR) PCLXR/L Lever Lock Tools Carrying the CXMG 80 Rhombic Inserts GAMF H WF LH H B GAMP 95º 95º Designation B H HF LF LH WF GAMP GAMF Insert PCLXR/L -4X CXMG... PCLXR/L 6-4X CXMG... LF 50% ADDITIONAL DISCOUNT ADDITIONAL DISCOUNT 9

30 ISO standard tools perform most of the industry's chip removal. The applications range from finishing to roughing. As a full-line supplier of metalworking tools, ISCAR naturally provides the full ISO range of quality tools. All standard geometries are supplied, including the most popular trigon shape. These semi-triangular turning inserts used for axial and face turning, feature six 80 corner cutting edges, thus saving production time and cost while maximizing insert life. ISCAR offers a variety of unique chipformer and grade combinations that provide solutions to most of modern industry's machining needs. 50 CNMG 43 / WNMG 43 CVD/PVD Assorted Inserts Receive 5% 30 Valid from April 9 until August 30, 08

31 In many turning applications, people tend to use larger inserts than are actually required for the machining parameters being applied. To fill the niche, ISCAR is introducing a wide range of ISOTURN small sized inserts, which provide an economical advantage per cutting edge. The new inserts are available in a wide range of geometries, corner radii, new chipformers and the most advanced SUMO TEC carbide grades. 50 CVD/PVD Assorted Inserts Receive 5% 3 Valid from April 9 until August 30, 08

32 Become an INDUSTRY 4.0 Master! Robots System Integration Internet of Things Big Data Cloud 3D Simulation ISCAR s Easy to Use Digital World of Applications Web Apps E-CAT CLOUD Mobile Apps