MSME Testing Centre, 65/1, G. S. T. Road, Guindy, Chennai, Tamil Nadu. Discipline Electrical Testing Issue Date
|
|
- Rosanna Hamilton
- 5 years ago
- Views:
Transcription
1 Last Amended on - Page 1 of 7 I. TRANSMISSION LINE EQUIPMENT & ACCESSORIES ]] 1 Stockbridge Vibration dampers for Power lines Examination & IS 9708:1993 Cl. 7.2 Cl. 7.3 Mass pull off (Slip) Cl kn Clamp Slip test Cl kn Clamp Bolt Torque Test Cl N-m Galvanizing test uniformity Chemical Method IS Cl.7.11 Magnetic power loss Cl A 2 Spacers and Spacer Dampers for twin horizontal bundle conductors Examination & IS 10162:1982 Cl. 5.2 Cl. 5.3 Tensile Load Test Cl kn Compression & Pull off Test Cl kn Clamp Bolt Torque Test Cl N-m
2 Last Amended on - Page 2 of 7 Assembly Torque Test Cl N-m Magnetic power loss Cl A Cl g/m 2 3 Metal Fittings of Insulators for Power Lines with nominal voltage greater than 1000 V Freedom from defects & IS 2486 Part 1 :1993 : Cl.5,6 Part 2: 1989 : Cl.8 : Cl.9.4 : Cl g/m 2 visual Slip strength test IS 2486 Part 1 :1993 IS 2486 Part 2: 1989 Cl kn Mechanical strength test Cl kn Electrical Resistance Cl mω Heating cycle test Cl A
3 Last Amended on - Page 3 of 7 4 Electric Power Connectors Tensile test IS 5561: 1970 Cl kn Electrical Resistance Cl mω Temperature rise test Cl A Cl.14 Galvanizing test Uniformity : Cl.15 5 Conductor and Earth wire Accessories for overhead Power lines (Armour rod, binding wires & taps for Examination & IS 2121 Part 1: 1981 Cl.7.2 Cl.7.3 Tensile strength test Cl kn Electrical Resistance test Cl mω Wrapping test Cl.7.6 Slip strength test Cl kn Bend Test Cl.7.10 Resilient test Cl.7.11 visual
4 Last Amended on - Page 4 of 7 6 Conductor and Earth wire Accessories for overhead Power lines (Midspan joints and repair sleeves for Examination & IS 2121 Part 2: 1981 Cl.6.2 Cl.6.3 Failing Load test Cl kn Electrical Resistance Cl mω Heating cycle test Cl A Cl g/m 2 7 Conductor and Earth wire Accessories for overhead Power lines (Armour Rod, binding wires & Tapes for Examination & IS 2121 Part 3 :1992 Cl.5.2 Mechanical Strength test Cl kn Electrical Resistance Cl mω Cl g/m 2
5 Last Amended on - Page 5 of 7 8 Aluminum (Aluminium Stranded IS 398 Part 1: 1996 Cl.12.2 Breaking load of wire Cl kn Conductor Resistance Cl mω Measurement Lay ratio Cl.12.6 Wrapping test Cl Aluminum (Aluminium conductor, Galvanised steel reinforced) IS 398 Part 2: 1996 Cl.13.2 Breaking load of wire Cl kn 25 kn Wrapping test Cl.13.5 Conductor Resistance Cl mω Measurement Lay ratio Cl.13.8 Cl g/m 2 visual
6 Last Amended on - Page 6 of 7 Ductility test Elongation test (13.4.2) IS 398 Part 2: 1996 Cl Aluminum (Aluminium conductors, aluminized steel reinforced) IS 398 Part 3: 1976 Cl.7 Breaking load of wire Cl k N 25 kn Ductility test (Elongation test) Cl.12.3 Cl Wrapping Test Cl Conductor Resistance Cl mω Measurement Lay ratio Cl. 2.4 Aluminizing Test Mass of coating Continuity of coating Chemical Method IS Cl to 200g/m 2
7 Last Amended on - Page 7 of 7 11 Aluminum (Aluminium Alloy Stranded IS 398 Part 4: 1994 Cl.7 Breaking load of wire Cl kn Elongation test Cl.12.3 Conductor Resistance Cl mω Measurement Lay ratio Cl X-X-X-X-X-X-X-X-X-X-X-X-X-X-
Power Systems 2 ELE3015. Lecture 1: Transmission Lines
Power Systems 2 ELE3015 Lecture 1: Transmission Lines Transmission Lines: Introduction Use to carry electrical power from point of generation to the point of use. Usually over large distances. Made with
More informationSPECIFICATION NO. : JPL/KWTL/A1 Page 1 of 5
Page 1 of 5 Tower Package (Package A1) for (i) 400 kv D/C (Quad Bundle) Karcham Wangtoo Abdullapur Line Part I and (ii) LILO of 400 kv D/C (Triple Bundle) Baspa Nathpa Jhakri Line at Karcham Wangtoo; associated
More informationOVERHEAD LINE INSTALLATION TRAINING
OVERHEAD LINE INSTALLATION TRAINING 2-day seminar, max. 12 participants OVERHEAD LINE INSTALLATION TRAINING The seminar offers instruction and practical tips on the installation, inspection and maintenance
More informationUNIVERSITY SERVICES ANNEX James Madison University Harrisonburg, Virginia State Project Code: Architect s Project Number:
SECTION 260526 - GROUNDING AND BONDING FOR ELECTRICAL SYSTEMS PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract apply to this Section. 1.2 SUMMARY A. This Section
More informationNPS/001/024 Technical Specification for Low Voltage Aerial Bundled Conductor Fittings
Version:- 5.0 Date of Issue:- July 2017 Page 1 of 12 NPS/001/024 Technical Specification for Low Voltage Aerial Bundled Conductor Fittings 1. Purpose The purpose of this document is to outline the technical
More information056 : 1997 CEB STANDARD
056 : 1997 CEB STANDARD CONDUCTOR AND INSULATOR HARDWARE FITTINGS FOR MEDIUM VOLTAGE OVERHEAD POWER LINES CEYLON ELECTRICITY BOARD SRI LANKA CEB STANDARD 056:1997 Specification for CONDUCTOR AND INSULATOR
More informationTechnical Specification for Helical Fittings for Overhead Power Lines
Ergon Energy Corporation Limited Technical Specification for Helical Fittings for Overhead Power Lines ETS01-09-03 Specification ETS01-09-03 Ver 3 Contents 1. Purpose and Scope... 4 2. References... 4
More informationGUY-GRIP Dead-end NOMENCLATURE GENERAL INFORMATION SAFETY CONSIDERATIONS
GUY-GRIP Dead-end NOMENCLATURE Please visit our web site at www.preformed.com for additional literature.guy-grip Dead-end Application Procedure - SP2045 Cross-over Marks: (A) Indicate starting point for
More informationGUY-GRIP Dead-end NOMENCLATURE GENERAL INFORMATION SAFETY CONSIDERATIONS
GUY-GRIP Dead-end NOMENCLATURE Tower Products, Dead-end and Dead-end Accessories: Section 1 Please visit our web site at www.preformed.com for additional literature.guy-grip Dead-end Application Procedure
More informationACCELARATED POWER DEVELOPMENT AND REFORM PROGRAMME. Technical Specification (T.S)
ACCELARATED POWER DEVELOPMENT AND REFORM PROGRAMME SECTION - V Technical Specification (T.S) 37 (SCHEDULE I) TECHNICAL SPECIFICATION FOR SUPPLY OF AB CABLE 38 1. SCOPE: TECHNICAL SPECIFICATION This specification
More informationConstruction guideline
1/6 1) SUMMARY OF ABBREVIATIONS FOR CABLE CONSTRUCTION ELEMENTS MSR - : EUPEN code for INSTRUMENTATION CABLES JE - : cable for INDUSTRIAL ELECTRONICS RD - : cable for CONTROL SYSTEMS INSULATION MATERIALS:
More informationManufacturer of Hardware Fittings & Accessories for
www.approachmedia.in 9427614395 Manufacturer of Hardware Fittings & Accessories for Transmission lines Distribution lines & Substation Plot No : 390-391, GIDC Manjusar, Taluka: Savli, District: Vadodara
More informationSPECIFICATION FOR FRLS POWER CABLES
SPECIFICATION FOR FRLS POWER CABLES 1.0 SCOPE This specification cover the technical requirements of design, manufacture, testing and delivery to site of Power Cables of 1100V grade with FRLS PVC Sheathed,
More informationSECTION GROUNDING AND BONDING FOR ELECTRICAL SYSTEMS
SECTION 26 05 26 - GROUNDING AND BONDING FOR ELECTRICAL SYSTEMS PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions
More informationSPECIFICATION FOR STOCKBRIDGE TYPE VIBRATION DAMPERS FOR DISTRIBUTION AND TRANSMISSION OVERHEAD LINES
For stockbridge type vibration dampers for Page no. : 1 of 22 SPECIFICATION FOR STOCKBRIDGE TYPE VIBRATION DAMPERS FOR DISTRIBUTION AND TRANSMISSION OVERHEAD LINES Prepared by: Eng. N.Mizrachi (חתום) Checked
More informationFixings, bonds and clamps
Square tape clamp Material 25 x 3mm Copper 0.12kg CT105-H 25 x 6mm Copper 0.30kg CT110-H 50 x 6mm Copper 0.60kg CT115-H Manufactured from high quality copper and aluminium alloys. Simple to install, providing
More informationTECHNICAL SPECIFICATION A.B. CABLE
TECHNICAL SPECIFICATION A.B. CABLE 1.0 NATURE OF WORK The work covered by this Specification is for L.T lines in A.B cable as specified herein and in the attached Schedules. The overhead distribution lines
More informationSECTION CHAIN-LINK FENCES AND GATES 02821/1
SECTION 02821 - CHAIN-LINK FENCES AND GATES 02821/1 PART 1 - GENERAL 1.1 SUMMARY A. This Section includes the following: 1. Chain-Link Fences: 2. Gates: horizontal slide or swing. 3. Fences installed where
More informationSTANDARD TECHNIQUE : OH4L/1
Company Directive STANDARD TECHNIQUE : OH4L/1 Relating to Stay Strands and Fittings for Overhead Lines ST:OH4L/1 March 2012-1 of 21 - Document Revision & Review Table Date Comments Author 06/06/13 Note
More information04.00 GENERAL SECONDARIES & SERVICES SECONDARY AND SERVICE CABLE SPLICES INSULATED SERVICE ENTRANCE COMPRESSION CONNECTORS 04.
4. GENERAL SECONDARIES & SERVICES 4.- TIE COLOR CODING 4.-6 SECONDARY AND SERVICE CABLE SPLICES 4.- INSULATED SERVICE ENTRANCE COMPRESSION CONNECTORS 4.- 4. POLE ATTACHMENTS POLE ATTACHMENT DEVICES NEUTRAL
More informationKenya Power and Lighting Company VI Contract A31
Kenya Power and Lighting Company VI 4.1.6-1 Contract A31 4.1.6. TELECOMMUNICATIONS... 2 4.1.6.1. General requirements... 2 4.1.6.2. SCOPE OF WORK... 2 4.1.6.3. OPGW... 3 4.1.6.4. Optical Distribution Flames
More informationTS 804 CABLES TABLE OF CONTENTS TRAFFIC SIGNAL EQUIPMENT POLE WIRING DIAGRAM LOCATIONS WITH CENTRE MEDIANS
TORONTO TRANSPORTATION January 2012 TS 804 CABLES TABLE OF CONTENTS 1. DRAWINGS TTD 804.001 TTD 804.002 TTD 804.003 TTD 804.005 TTD 804.006 TTD 804.007 TTD 804.010 TTD 804.015 TTD 804.020 TTD 804.025 TTD
More informationSuspension clamps. Contents. General Oscillating and trunnion type suspension clamps forged.. 3. Oscillating type suspension clamps cast...
Contents General......................................... 2 Oscillating and trunnion type suspension clamps forged.. 3 Oscillating type suspension clamps cast............... 4 Envelope type suspension
More informationSWER OVERHEAD CONDUCTOR DISTRIBUTION SYSTEM AFTER GAZETTING (WORKING DOCUMENT FOR A 3 YEAR PERIOD) DATE PAGE PARAGRAPH DESCRIPTION ORIGINATOR APPROVED
PART B-04 TITLE: SWER OVERHEAD CONDUCTOR DISTRIBUTION SYSTEM SPECIFICATION NO: B-04 INCEPTION DATE: AFTER GAZETTING (WORKING DOCUMENT FOR A 3 YEAR PERIOD) AMENDMENTS / REVISIONS DATE PAGE PARAGRAPH DESCRIPTION
More informationSECTION GROUNDING AND BONDING
SECTION 16060 GROUNDING AND BONDING PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 1 Specification
More informationSECTION SUBSTATION BUS ASSEMBLIES ERGLE SUBSTATION
SECTION 16-372 SUBSTATION BUS ASSEMBLIES ERGLE SUBSTATION 1. GENERAL SPECIFICATIONS The work of this Section includes furnishing all labor, equipment, materials (unless specifically identified as Owner-furnished)
More informationNew designed XLPE-insulated cables substituting paper-insulated pipe type cables
MODERN CABLE SYSTEMS IN STEEL PIPES New designed XLPE-insulated cables substituting paper-insulated pipe type cables Volker AUE, Nexans Deutschland Industries, Germany, Volker.Aue@nexans.com Wilfried ROSEBROCK,
More informationRevamped High Ampacity Low Sag Stranded Carbon Fiber Composite Core Aluminium Conductor Fiber Reinforced Conductor (ACFR)
21, rue d Artois, F-75008 PARIS TR/01/18 CIGRE 2018 http : //www.cigre.org Revamped High Ampacity Low Sag Stranded Carbon Fiber Composite Core Aluminium Conductor Fiber Reinforced Conductor (ACFR) OGOSHI
More informationCERTIFICATE OF ACCREDITATION
CERTIFICATE OF ACCREDITATION In terms of section 22(2)(b) of the Accreditation for Conformity Assessment, Calibration and Good Laboratory Practice Act, 2006 (Act 19 of 2006), read with sections 23(1),
More informationSECTION GROUNDING AND BONDING
PART 1 - GENERAL 1.1 RELATED DOCUMENTS SECTION 25 05 26 GROUNDING AND BONDING A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 1 Specification
More informationIndustrial Development and Testing Laboratory, 40/107, Jay Bibi Road, Plot No. 18 & 20, Ghusuri, Howrah, West Bengal
Last Amended on - Page 1 of 6 I. MECHANICAL PROPERTIES OF MATERIAL 1. Ferrous & Non-Ferrous Metals & Alloys Tensile test Ultimate Tensile Strength Yield Stress/Proof Stress/E.U.L % Elongation % Reduction
More informationNPS/002/001 Technical Specification for Earthing Materials
Version:- 6.0 Date of Issue:- October 2017 Page 1 of 14 NPS/002/001 Technical Specification for Earthing Materials 1. Purpose The purpose of this document is to detail the requirements of Northern Powergrid
More informationCONSTRUCTION SPECIFICATION FOR THE INSTALLATION OF SIGN LUMINAIRES
ONTARIO PROVINCIAL STANDARD SPECIFICATION METRIC OPSS 612 SEPTEMBER 1984 CONSTRUCTION SPECIFICATION FOR THE INSTALLATION OF SIGN LUMINAIRES 612.01 SCOPE 612.02 REFERENCES 612.03 Not Used 612.04 Not Used
More informationACCR. More Amps. More Confidence. Glenmar E. Cambri, REE Senior Applications Engineer
TM ACCR More Amps More Confidence Glenmar E. Cambri, REE Senior Applications Engineer What is 3M ACCR? A high voltage, overhead transmission conductor designed as a drop-in replacement for ACSR and other
More informationCONSTRUCTION SPECIFICATION FOR POLE ERECTION
ONTARIO PROVINCIAL STANDARD SPECIFICATION METRIC OPSS 615 SEPTEMBER 1993 CONSTRUCTION SPECIFICATION FOR POLE ERECTION 615.01 SCOPE 615.02 REFERENCES 615.05 MATERIALS TABLE OF CONTENTS 615.05.01 Concrete.02
More informationElectrical Isolation
Electrical Isolation Period 6 Practical Applications 2017 February 21-23, 2017 Mark E. Anderson M.T.S 1 Introduction Common isolating fittings & their installation Uses & locations of isolating fittings
More informationREA LISTED. Throughout the catalog you will notice blue highlighted items. These are the most frequently ordered BURNDY Products.
Grounding BURNDY Products E-44 TYPE GRC HIGH STRENGTH GROUND ROD CLAMP For Copper Cable to Rod High copper alloy ground connector for joining a range of cable to copper clad, galvanized steel, and stainless
More informationTransmission Line General Requirements Including Typical Overhead Line Structures. Document Number: 1-03-FR-09
Transmission Line General Requirements Including Typical Overhead Line Structures Document Number: 1-03-FR-09 VERSION 1.0 June 2018 This functional requirements document is in line with the organisation's
More informationTesting of THERMOLIGN Dead-End. For. Prepared by: Robert Whapham Preformed Line Products, Principal Investigator
Testing of THERMOLIGN Dead-End For 477-kcmil 3M TM Composite Conductor Prepared by: Robert Whapham Preformed Line Products, Principal Investigator 477 ACCR THERMOLIGN Dead-end Page 1 of 7 Scope This report
More informationRayfit The advanced heat-shrinkable joint sleeve for medium voltage joints up to 36 kv NEW ENERGY DIVISION
Rayfit The advanced heat-shrinkable joint sleeve for medium voltage joints up to 36 kv NEW ENERGY DIVISION Rayfit The advanced heat-shrinkable joint sleeve for medium voltage joints up to 36 kv Rayfit
More informationCutouts and Fuse Links Equipment to protect against faults and over-current conditions on power distribution systems. Open-Type Cutouts Linkbreak Cutouts Loadbreak Cutouts Cutout-Arrester Combinations
More informationNORTHWESTERN UNIVERSITY PROJECT NAME JOB # ISSUED: 03/29/2017
SECTION 26 0526 - GROUNDING AND BONDING FOR ELECTRICAL SYSTEMS PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions
More informationCS-21 STREET STRUCTURES TABLE OF CONTENTS
TABLE OF CONTENTS CS-21.0 Street Structures... 1 CS-21.1 Road Signs... 1 CS-21.2 Safety Barriers... 1 CS-21.3 Bollards and Removable Bollards... 1 CS-21.4 Pedestrian Barrier Rails and Handrails... 1 CS-21.5
More informationNEPAL ELECTRICITY AUTHORITY (An Undertaking of Government of Nepal)
NEPAL ELECTRICITY AUTHORITY (An Undertaking of Government of Nepal) PROJECT MANAGEMENT DIRECTORATE Electricity Transmission Expansion and Supply Improvement Project TAMAKOSHI KATHMANDU 220/400 KV TRANSMISSION
More information660 Volts 630 & 800AMP
Ergon Energy Corporation Limited Technical Specification for Switch- Disconnectors and Fuse-Switch- Disconnectors 660 Volts 630 & 800AMP ETS-06-02-01 Check this is the latest Process Zone version before
More informationNotes Changed note Date. 1 (A) Changed template 09 / 07 / 2008
Revisions Notes Changed note Date 1 (A) Changed template 09 / 07 / 2008 2 Changed template. Clause 12.5.4.1 hot-rolled steel added. Clause 12.5.4.2, 12.5.2.4, 12.5.3.4, 12.5.4.4, 12.5.5.4, 12.5.6.4, 12.5.7.4
More informationComposite insulators. Features. Sicat 8WL3068, 8WL3078 and 8WL3088 for overhead contact line systems. siemens.com/rail-electrification
Composite insulators Sicat 8WL3068, 8WL3078 and 8WL3088 for overhead contact line systems siemens.com/rail-electrification The Sicat 8WL3068, 8WL3078 and 8WL3088 type silicone composite insulators in accordance
More informationReinforcing Aluminum Conductors with High Tensile Strength Bezinal Coated Steel
Reinforcing Aluminum Conductors with High Tensile Strength Bezinal Coated Steel WHITE PAPER Reinforcing Aluminum Conductors with High Tensile Strength Bezinal 1 Coated Steel Dr. Dale A. Douglass Over 80%
More informationTOWER & ANTENNA Product Catalog
TOWER & ANTENNA Product Looking for Reliable Solutions to your Communications Network Needs? COMMUNICATIONS Product Fiber Optic, Copper, Demarcation, Bonding, Strand and Cable Solutions for the Communications
More informationNZQA registered unit standard version 3 Page 1 of 5. Install high voltage (HV) electricity network overhead conductors
Page 1 of 5 Title Install high voltage (HV) electricity network overhead conductors Level 4 Credits 8 Purpose People credited with this unit standard are able to: interpret scope of work for installing
More informationTest Report on 3M ACCR 477-T16 Conductor Returned from Xcel Riverside Line after 13 Years of Service in Minneapolis, MN
Test Report on 3M ACCR 477-T16 Conductor Returned from Xcel Riverside Line after 13 Years of Service in Minneapolis, MN 3M HCC Testing Laboratory November 3, 2015 Phu Trac Quality Quality Specialist: Phu
More informationIncreasing the capacity of existing transmission lines by re-conductoring using ACSS HTLS conductors
Increasing the capacity of existing transmission lines by re-conductoring using ACSS HTLS conductors Thomas Wilki Director, International Sales & Development Southwire Company ACSS CONDUCTORS - TOPICS
More information0.6/1 kv LOW VOLTAGE CONTROL CABLES. Conductors. Insulation. Assembly. Standard Colour Code. Armour (Optional) Screening (Optional) Outer Sheath
0.6/1 kv LOW VOLTAGE CONTROL CABLES PVC OR XLPE INSULATED, PVC SHEATHED AS PER IEC 60502-1 Conductors Conductors shall be Circular Stranded, Class 2 as per IEC 60228, BS EN 60228. Upon request, Solid Circular
More informationF4P lay-in lugs SERIES SPECIFICATION
F4P lay-in lugs SERIES SPECIFICATION Lay-in lugs are ideal for both grounding and continuous loop applications. Made of aluminum alloy and tin plated for low contact resistance, they are suitable for use
More informationTechnical Specification for Live Line Tap Connectors
Ergon Energy Corporation Limited Technical Specification for Live Line Tap ETS-06-01-01 Check this is the latest Process Zone version before use. Specification ETS 06-01-01 Ver 1 Contents 1. Purpose and
More information1.2 REFERENCES.1 CSA C22.2 No.0.3, Test Methods for Electrical Wires and Cables.
Issued 2005/06/01 Section 16122 Wire and Cables (0 1000V) Page 1 of 5 PART 1 GENERAL 1.1 RELATED SECTIONS.1 Section 16151 Wire and Box Connectors 0 1000 1.2 REFERENCES.1 CSA C22.2 No.0.3, Test Methods
More information11KV PORCELAIN INSULATORS AND FITTINGS
REC Specification 3/1971 (Revised 1993) 11KV PORCELAIN INSULATORS AND FITTINGS FOREWORD This specification was originally issued in 1971 on the basis of the decisions taken in the First and Second Standardisation
More informationIndex GROUNDING CONNECTORS. TYPE WB Ground Rod Clamps. TYPE G/SRC Ground Rod Clamps. Heavy-Duty Clamps. Standard-Duty Clamps (Universal)
TYPE B Ground Rod Clamps Heavy-Duty Clamps GROUNDING CONNECTORS R30117 For direct burial. For connecting ground wire to driven rod. Designed to maintain proper alignment between ground wire and rod. Cast
More informationDesign Standard Conduit for Electrical Systems
Design Standard Purpose: This design standard has the purpose of creating a consistent application for the installation of conduits throughout the East Side Union High School District, therefore achieving
More information1.1 All the testing apparatus shall be checked periodically and records of such checks shall be maintained.
DOC: STI/398(Pt. 5)/2 SCHEME OF TESTING AND INSPECTION FOR CERTIFICATION OF ALUMINIUM CONDUCTORS GALVANIZED STEEL REINFORCED FOR EXTRA HIGH VOLTAGE (400 KV and ABOVE) ACCORDING TO IS 398(Pt. 5):1992 1.
More informationMadhya Bhotekoshi Jalavidyut Company Limited
Madhya Bhotekoshi Jalavidyut Company Limited Middle Bhotekoshi Hydroelectric Project (102MW) BIDDING DOCUMENTS For Design, Supply, Construction, Testing and Commissioning of Single Circuit 220kV Transmission
More informationSECTION A. ASTM B3 - Standard Specification for Soft or Annealed Copper Wire; 2013.
PART 1 GENERAL 1.1 SECTION INCLUDES SECTION 26 0519 A. Single conductor building wire. B. Metal-clad cable. C. Wiring connectors. D. Electrical tape. E. Wire pulling lubricant. F. Cable ties. 1.2 RELATED
More informationConnectors. Multi-purpose connecting clamps. Stainless steel cross connectors
Connectors Multi-purpose connecting clamps Thread in lower part With mushroom head bolt and protection against twisting Art. No. Design Pack / Weight 100147 Galvanised steel, 2-part, round/round 100149
More informationTECHNICAL SPECIFICATION OF ACCESSORIES SUITABLE FOR 7/3.15 mm G.I. EARTH WIRE
GUJARAT ENERGY TRANSMISSION CORPORATION LTD. Sardar Patel Vidyut Bhavan, Race Course, Vadodara: 390 007 TECHNICAL SPECIFICATION OF ACCESSORIES SUITABLE FOR 7/3.15 mm G.I. EARTH WIRE GETCO/E/TS EAC020/R0
More informationKOMBI PVA KOMBI PVA 1 CC
KOMBI PVA ** Radius of bend Max. supply pressure *D= Ø internal nominal Flame retardant (categoria II) - 10 C +120 C 0 Pa PVC/ALUMINIUM combined flexible duct that combines the high mechanical resistance
More informationHigh Temperature & Low Sag Conductor
High Temperature & Low Sag Conductor To address the ever-changing demands in everyday life as well as in the industries, we never stop researching, designing, developing, and manufacturing more variety
More informationAn Insight into Design, Development & Testing of Insulation Piercing Connectors for LV Application
An Insight into Design, Development & Testing of Insulation Piercing Connectors for LV Application Introduction Designed for Indoor and outdoor applications Non-tension tap and splice applications Used
More informationSpecial Provision No. 109S17 June 2017
AMENDMENT TO OPSS 905, NOVEMBER 2014 Special Provision No. 109S17 June 2017 OPSS 905, November 2014 Construction Specification for Steel Reinforcement for Concrete is deleted in its entirety and replaced
More information1. Cast-in-place concrete is specified in Section
SECTION 03 38 00 PART 1 - GENERAL 1.01 DESCRIPTION A. This Section describes the requirements for furnishing and installing post-tensioned slabs, jacks, jacking and anchors at Parking Structure, and record
More informationRESIN FILLING TYPE JOINTING KITS FOR LOW VOLTAGE UNDERGROUND CABLES
CEB STANDARD 030-1 : 1996 Specification for RESIN FILLING TYPE JOINTING KITS FOR LOW VOLTAGE UNDERGROUND CABLES CEYLON ELECTRICITY BOARD SRI LANKA Specification for RESIN FILLING TYPE JOINTING KITS FOR
More informationEngineering Data for Copper and Aluminum Conductor Electrical Cables
2018 Edition Engineering Data for Copper and Aluminum Conductor Electrical Cables THE OKONITE COMPANY Okonite Cables...A higher Standard! The Okonite Company, 2018 Okonite Cables Table of Contents SECTION
More informationCONSULTATIONS TECHNICAL GUIDELINE. HVDC extruded cable
UNIT, BU1SNESS AREA OUR REFERENCE TR14-02-2E DATE 2018-01-24 CONSULTATIONS TECHNICAL GUIDELINE EDITION 1 APPROVED HVDC extruded cable This technical guideline describes the basic design and construction
More informationMICHIGAN DEPARTMENT OF TRANSPORTATION SPECIAL PROVISION FOR LOW-TENSION CABLE BARRIER. OPR:CT 1 of 5 APPR:JAR:DBP: FHWA:APPR:
MICHIGAN DEPARTMENT OF TRANSPORTATION SPECIAL PROVISION FOR LOW-TENSION CABLE BARRIER OPR:CT 1 of 5 APPR:JAR:DBP:09-07-11 FHWA:APPR:09-07-11 a. Description. This work consists of furnishing and installing
More informationPART 7 Technical Specification for Overhead and Underground Service Connection works for the Year
PART 7 Technical Specification for Overhead and Underground Service Connection works for the Year 2016-17 Technical Specification for Overhead and Underground Service Connection works for the Year 2016-17
More informationSECTION ELECTRICAL SITE UTILITIES
SECTION 16402 ELECTRICAL SITE UTILITIES PART 1 GENERAL 1.01 SUMMARY A. Section Includes: Electrical site utilities and coordination of requirements with the utility company and service specifications.
More informationTest Report No.: Page 2 of 35
Test Report No.: 50093959 001 age 2 of 35 Test Report AS/NZS 5000.1:2005 including amendment 1 Electric cables olymeric insulated for working voltages up to 0.6/1kV Test item particulars: 1C 4mm 2 to 16
More information3. Intermediate metal conduit (IMC). 4. Electric metallic tubing (EMT). 5. Flexible metal conduit (FLEX). 6. Polyvinyl chloride conduit (PVC).
SECTION 16111 CONDUITS PART 1 - GENERAL 1.01 DESCRIPTION A. General: Provide conduits, complete, as shown, specified or required per Contract Documents. Principal items include: 1. Rigid aluminum conduit.
More informationThis product specification is written according to the Construction Specifications Institute MasterFormat, 2014 Update.
Kaf-Tech Product Specification This product specification is written according to the Construction Specifications Institute MasterFormat, 2014 Update. SECTION 260519 METAL CLAD CABLE - MC-PLUS Neutral
More informationAmerican Residential Deck Railing Design Guide
American Residential Deck Railing Design Guide Intended for use by Designers & Architects Engineers & Professional Installers 8 th Edition ProbuiltRailings.com TABLE OF CONTENTS ProBuilt Design Manual
More informationSECTION GROUNDING AND BONDING FOR ELECTRONIC SAFETY AND SECURITY
PART 1 - GENERAL 1.1 DESCRIPTION SECTION 28 05 26 GROUNDING AND BONDING FOR ELECTRONIC SAFETY AND SECURITY SPEC WRITER NOTE: Delete // // if not applicable to project. Also delete any other item or paragraph
More informationSECTION HANGERS AND SUPPORTS FOR PLUMBING
SECTION 22 05 29 HANGERS AND SUPPORTS FOR PLUMBING PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division
More informationSECTION 7.3 TECHNICAL SPECIFICATION OF POWER CABLES & CONDUCTOR
SECTION 7.3 TECHNICAL SPECIFICATION OF POWER CABLES & CONDUCTOR 458 7.3.1 11 KV Cables 7.3.1.1 General Where a Manufacturer s Standard or a national Standard equal to or better than the appropriate specified
More informationTECHNICAL SPECIFICATION FOR CLAMPS & CONNECTORS FOR 66/132/220/400 KV SUB-STATION
GUJARAT ENERGY TRANSMISSION CORPORATION LTD. Sardar Patel Vidyut Bhavan, Race Course, Vadodara: 390 007 TECHNICAL SPECIFICATION FOR CLAMPS & CONNECTORS FOR 66/132/220/400 KV SUB-STATION GETCO/E/TS-C&C
More informationSECTION PARK NON-SEGREGATED BUS SPECIFICATION
Page 1 of 5 SECTION ------- PARK NON-SEGREGATED BUS SPECIFICATION 1.0 SCOPE 1.1. This specification describes assemblies of 600V, 5Kv and 15Kv non-segregated bus duct, which will be installed indoors and
More information1. Fence and gate posts, rails, and fittings. 2. Chain-link fabric, reinforcements, and attachments.
SECTION 323113 - CHAIN LINK FENCES AND GATES PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification
More informationA. Product Data: Identify thermal conductivity, thickness, and jackets (both factory and field applied, if any), for each type of product indicated.
SECTION 23 07 13 - PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification Sections, apply
More informationDRAFT TANZANIA STANDARD. Part 7: Underground Power Cables for rated voltages 0.6kV/1kV (Um 1.2kV)
EDC3 (5239) P3 Mini-Grid Systems DRAFT TANZANIA STANDARD Part 7: Underground Power Cables for rated voltages 0.6kV/1kV (Um 1.2kV) TANZANIA BUREAU OF STANDARDS TBS 2017 First Edition 2017 Table of Contents
More informationGEMSCAB INDUSTRIES LIMITED STANDARD PLAN FOR HT XLPE CABLES AS PER IS:7098(PART-II)
-1 RAW MATERIAL INSPECTION 1.1 ALUMINIUM ROD/COPPER ROD (i) Diameter 100% IS:5484 & IS:613 IS:5484 & IS:613 GIL-GIR-006 IQC (ii) Conductivity or resistivity 100% IS:5484 & IS:613 IS:5484 & IS:613 GIL-GIR-006
More informationSECTION EARTHING AND EARTH FAULT PROTECTION
SECTION 16660 PART 1 - GENERAL 1.01 DESCRIPTION A. The work to be performed includes, but is not necessarily limited to, all work involved with the construction and assembly of a complete electrical earthing
More informationTECHNICAL SPECIFICATION FOR 1.1KV XLPE POWER CABLE SECTION-1
ANNEXURE TO TENDER NO. PUR42396GM DATED 06 th FEBRUARY 2014 SUPPLY OF 1.1KV GRADE LT POWER CABLES FOR THE PERIOD APRIL 2014 MARCH 2016 TECHNICAL SPECIFICATION FOR 1.1KV XLPE POWER CABLE SECTION-1 1.1 SCOPE
More informationRADIOACTIVE MATERIAL PACKAGE CLOSURES WITH THE USE OF SHAPE MEMORY ALLOYS
RADIOACTIVE MATERIAL PACKAGE CLOSURES WITH THE USE OF SHAPE MEMORY ALLOYS J. A. Koski and D. R. Bronowski Sandia National Laboratories*,PO Box 5800, Albuquerque, NM 87 185-0717 SUMMARY When heated from
More informationSECTION PART 1 GENERAL
SECTION 16060 GROUNDING AND BONDING PART 1 GENERAL 1.1 SUMMARY A. Section Includes: Grounding of electrical systems and equipment and basic requirements for ground for equipment, circuits, and systems.
More information.1 Comply with the General Conditions of the Contract, Supplementary General Conditions and the requirements of Division 1.
PAGE 1 PART 1 GENERAL 1.1 REFERENCE.1 Comply with the General Conditions of the Contract, Supplementary General Conditions and the requirements of Division 1. 1.2 RELATED WORK SPECIFIED ELSEWHERE.1 Cast
More information1. All Members of Power Cables Sectional Committee, ET 09; 2. All Members of Electrotechnical Division Council; and 3. All other Interested.
DRAFT IN WIDE CIRCULATION DOCUMENT DESPATCH ADVICE Reference Date ET 09/T-45 03-05-2011 TECHNICAL COMMITTEE ETD 09 --------------------------------------------------------------------------------------------------------------
More informationTECHNICAL SPECIFICATION FOR ACSR CONDUCTORS
WBSEDCL WEST BENGAL STATE ELECTRICITY DISTRIBUTION COMPANY LIMITED (A Govt. of West Bengal Enterprise) Office of the Chief Engineer : Procurement & Contracts Department Vidyut Bhavan (4 th Floor) : Bidhannagar
More information.1 ANSI/ASME B31.1, Power Piping, (SI Edition)..2 American Society for Testing and Materials (ASTM)
Fitness Facility Addition Page 1 PART 1 GENERAL 1.1 RELATED SECTIONS.1 Section 03300 - Cast-in-Place Concrete.2 Section 05121 - Structural Steel for Buildings.3 Section 05500 - Metal Fabrications 1.2 REFERENCES.1
More informationTitle Transmission Line Maintenance Standards. Reference Number PMP 17 - (RIC Standard: EP SP)
Discipline Engineering Standard - NSW Category Electrical Title Reference Number PMP 17 - (RIC Standard: EP 10 01 00 02 SP) Document Control Status Date Prepared Reviewed Endorsed Approved Mar 05 Standards
More informationOverhead Smart Conductors
Overhead Smart Conductors HTLS (TACSR/STACIR/ACSS/ACSS-TW/GAP Type) AAC/AAAC/ACSR/ACAR/AACSR/AL-59 STANDARDS: IS, IEC, EN(BS EN), ASTM, AS, NFC, VDE, UL, CAN-CSA, DIN, IEEE, SS, ANSI Standards with CE
More informationSECTION ALUMINUM HANDRAIL SYSTEMS
SECTION 05520 ALUMINUM HANDRAIL SYSTEMS PART 1 - GENERAL 1.01 SUMMARY A. Section includes aluminum handrails and railings. B. Related Work: 1. Section 03300 - Cast-in-Place Concrete C. References: 1. American
More informationACSR CONDUCTOR. March 2015 WEST BENGAL STATE ELECTRICITY TRANSMISSION COMPANY LIMITED
ACSR CONDUCTOR March 2015 Engineering Department WEST BENGAL STATE ELECTRICITY TRANSMISSION COMPANY LIMITED Regd. Office: VidyutBhawan, Block DJ, Sector-II, Bidhannagar, Kolkata 700091. CIN: U40101WB2007SGC113474;
More information