METAL SEATED GATE VALVE
|
|
- Dennis Cox
- 5 years ago
- Views:
Transcription
1 BEI JI NG JOI NTFLOW SYSTEM CO. Gat eval ve
2 FEATURE Solid wedge gate valves are the perfect solution as a closing device in pipeline systems. Because of the straight bore all impurities can pass through the valve without doing any harm. Combined with the full bore it will prevent pressure loss caused by turbulence. Co hard alloy welded sealing surface, which is wearing resistant, erosion proof, abrasion proof and long-lived. The surface and the adjusting media of valve shaft are nitrogenized so that it is of erosion and abrasion resistant. PN 15.0MPa ( Class900 ),the middle cavity is designed as a self-tightening sealing structure to have the sealing performance reinforced along with the pressure rise. There is no backward sealing structure in the valve to ensure the sealing reliable. APPLICATION Be suitable in applications with water supply, sewage treatment and neutral liquids in the mining industry, enterprises and high buildings. Suitable temperature: -10~300 C(DI), -29~425 C(CS), -40~ 500 C(SS). Working pressure: 1.0~16.0 Mpa, 150~900 Lb. Caution: FREEZING WEATHER PRECAUTION - Subsequent to testing a piping system, gate valves should be left in an open position to allow complete drainage. STANDARD Design and Manufacture BS5163/DIN3352/API 600/API 6D/ISO Inspection and Testing ISO 5208/API 598/API 6D Face to Face Dimension ISO 5752/EN 558/ASME B16.10 Flange Dimension ASME B16.5/ASME B16.47/AWWA C207/ISO 7005/EN 1092 *More standard specifications are available on request. TEST DATA Nominal Diameter DN (mm) Nominal Pressure PN (MPa) 150lb 300lb 600lb 900lb Hydraulic Shell Test Pressure (MPa) Hydraulic Seal Test Pressure (MPa) *More test specifications are available on request. reserves the right to change specifications without notice. 1
3 MATERIAL SPECIFICATION Parts No. Parts Name Material 1 Body Cast Iron/Ductile Iron/Carbon Steel/Stainless Steel 2 Gasket Carbon Steel/Stainless Steel+Flexible Graphite 3 Seat Alloy Steel/Forged Steel+STL/Stainless Steel/Gunmetal 4 Wedge Cast Iron/Ductile Iron/Carbon Steel+13Cr/Carbon Steel+STL/Stainless Steel 5 Stem Carbon Steel/Stainless Steel 6 Upper Sealing Carbon Steel/Stainless Steel 7 Packing Flexible Graphite 8 Packing Sleeve Cast Iron/Ductile Iron/Carbon Steel/Stainless Steel 9 Gland Bolt Alloy Steel 10 Gland Nut Alloy Steel 11 Pin Alloy Steel/Stainless Steel 12 Packing Gland Ductile Iron/Carbon Steel/Stainless Steel 13 Stud Alloy Steel 14 Bonnet Alloy Steel 15 Bonnet Cast Iron/Ductile Iron/Carbon Steel/Stainless Steel 16 Oil Cup Carbon Steel 17 Stem Nut Gunmetal 18 Cover Nut Carbon Steel 19 Hand Wheel Cast Iron/Ductile Iron/Carbon Steel 20 Locking Nut Carbon Steel 21 Screw Alloy Steel *More material specifications are available on request. reserves the right to change specifications without notice. 2
4 DIMENSION (1.0 & 1.6 MPa) DN NPS L BS 5163 DIN 3202 F4 DIN 3202 F5 D 0 H 1.0 H *Flange dimensions (D, D 1, D 2, Z-d, b, f) refer to Catalogue of Accessory: Series 8 Flange. *More dimension specifications are available on request. reserves the right to change specifications without notice. 3
5 DIMENSION (150 & 300 lb) DN NPS 150lb 300lb L H H bevel-gear W W bevel-gear L H H bevel-gear W W bevel-gear *Face to face dimensions (L) herein are according to ASME B *Flange dimensions (D, D 1, D 2, Z-d, b, f) refer to Catalogue of Accessory: Series 8 Flange. *More dimension specifications are available on request. reserves the right to change specifications without notice. 4
6 DIMENSION (600 & 900 lb) DN NPS 600lb 900lb L H H bevel-gear W W bevel-gear L H H bevel-gear W W bevel-gear *Face to face dimensions (L) herein are according to ASME B *Flange dimensions (D, D 1, D 2, Z-d, b, f) refer to Catalogue of Accessory: Series 8 Flange. *More dimension specifications are available on request. reserves the right to change specifications without notice. 5
1071 Cast Steel Globe Steam Stop Valve (Flanged)
1071 Cast Steel Globe Steam Stop Valve (Flanged) Flanged Ends to DIN 2545 PN 40. Straight Pattern, Outside Screw, Yoke Type, Rising Stem, Bolted Bonnet. Renewable 13% Cr. Stainless Steel (S.S 410) working
More informationMaster Valve USA w w w. M a s t e r Va l v e U S A. c o m
Master Valve USA w w w.mastervalveusa.com Quality Controls All manufacturing is conducted under ISO 9001 certified quality management system Products are stringently manufactured in accordance with applicable
More informationFasani Pressure Seal Cast gate Valves - Style B WEDGE GATE
A wide range of gate valves specifically designed for high pressure and high temperature applications. Features GENERAL APPLICATION Our pressure seal gate valves are recommended for a large variety of
More informationPN 40 DN 25-40, PN 25 DN 50-80, PN 16 DN Ball seal alternatives Stellite (KC) PTFE (TC) Tightness class ISO 5208, EN RATE D RATE A
Operation WAFER PATTERN V-PORT BALL VALVE stainless steel 5, 501 series C ont R o L Description Edition Högfors ball sector valve series 5 is specially designed for control applications of various media
More informationCryogenic Service Valves
Cryogenic Service Valves Superlok cryogenic valves are used in many industries in a broad range gas service such as oxygen, nitrogen, argon and more. The valves incorporate specialized materials that maintain
More information1.2 REFERENCES.1 American National Standards Institute (ANSI)/American Society of Mechanical Engineers (ASME)
Issued 2005/06/01 Section 15113 Valves Cast Steel: Gate, Globe, Check, Ball Page 1 of 5 PART 1 GENERAL 1.1 RELATED SECTIONS.1 Section 01355 Waste Management and Disposal 1.2 REFERENCES.1 American National
More informationTypical Feed Water Heater Isolation System.
Typical Feed Water Heater Isolation System. Features and Benefits In the event of a defective tube system these valves are designed to stop the feed of high pressure feedwater and to bypass it around a
More informationSEMPELL HP PREHEATER PROTECTION VALVES TYPE AVS 4/5
Typical feed water heater isolation system FEATURES Body of forged steel Body in form piece to reduce a number of welds and fittings Body also available as a single block type thereby eliminating the nozzle
More informationLUNKENHEIMER FIGURE K4050 INLINE Y-BODY DN ASME CLASS 150
DN 50-500 ASME CLASS 150 The K4050 inline Y-body isolation valve is specially designed for severe service in alumina and mining applications where scale and erosion are present. FEATURES GENERAL APPLICATION
More informationClass 125S/200WOG Bronze Gate Valve Non-Rising Stem, Threaded Ends Testing: BS EN 12288, BS 5154, BS EN Working Pressure: PN16
Class 125S/200WOG Bronze Gate Valve Non-Rising Stem, Threaded Ends Testing: BS EN 12288, BS 5154, BS EN 12266 Working Pressure: PN16 FIG. 201 WORKING PRESSURE Working Pressure Non-Shock (psi) Saturated
More informationKTM Fire-safe and Anti-Static ASME 150/300 one piece, end entry, flanged ball valve for oil, gas, petrochemical and chemical industries
TM Fire-safe and Anti-Static ASME 150/300 one piece, end entry, flanged ball valve for oil, gas, petrochemical and chemical industries Features eneral applications Ideally suited for use in the oil and
More informationKEYSTONE SLIDE GATE VALVES FIGURE 215
Slide through, O-port gate design for severe service applications FEATURES GENERAL APPLICATION For severe service and specialty applications Pulp and paper Recycle paper Chemical Petrochemical Power Mining
More informationFigure 215. Slide through, O-port gate design for severe service applications. Features
Slide through, O-port gate design for severe service applications Features General Application For severe service and specialty applications Pulp and paper Recycle paper Chemical Petrochemical Power Mining
More informationVESSEL & REACTOR VALVES. VD Series DISC VALVES PROCESS VALVES
VD Series VESSEL & REACTOR VALVES DISC VALVES PROCESS VALVES FULL FLOW BOTTOM OUTLET VALVES Tank Bottom Disc Valve M Ring for high temperature & vacuum. Other sealing systems are available Code: VD4R-VD6R
More informationKTM Fire-safe and Anti-Static ASME 150/300 one piece, end entry, flanged ball valve for oil, gas, petrochemical and chemical industries
TM Fire-safe and Anti-Static ASME 150/300 one piece, end entry, flanged ball valve for oil, gas, petrochemical and chemical industries Features eneral applications Ideally suited for use in the oil and
More informationR o L. WAFER PATTERN V-PORT BALL VALVE stainless steel 465 series SILVER LINE. Description. Edition
WAFER PATTERN V-PORT BALL VALVE stainless steel C ont R o L Description Edition Högfors ball sector valve series 5 is specially designed for control applications of various medium like liquids, pulps and
More informationM33H ISO Full Bore Ball Valve DN50 to DN200 Flanged ASME 150 and ASME 300
Local regulations may restrict the use of this product to below the conditions quoted. In the interests of development and improvement of the product, we reserve the right to change the specification without
More informationVESSEL & REACTOR VALVES. VR Series RISING DISC PROCESS VALVES. Sold by: G&W Industrial Sales
VR Series VESSEL & REACTOR VALVES RISING DISC PROCESS VALVES CRUST BREAKING BOTTOM OUTLET VALVES Rising Disc Valves M Seal for high Pressure & Temperature. Dual Seal, Soft Seal, M Ring and M Control are
More informationBSA3HP Bellows Sealed High Pressure Stop Valve
Local regulations may restrict the use of this product to below the conditions quoted. In the interests of development and improvement of the product, we reserve the right to change the specification without
More informationMETAL & DUAL SEATED PISTON VALVES
VP Series VESSEL & REACTOR VALVES METAL & DUAL SEATED PISTON VALVES PROCESS VALVES HIGH PERFORMANCE PISTON VALVES Dual Seal Piston Valve Code: VP4D-VP6D High sealing performance of Dual Seal specially
More informationM21Si ISO and M21Vi ISO Reduced Bore Ball Valves DN15 to DN150 Flanged PN40
Local regulations may restrict the use of this product to below the conditions quoted. In the interests of development and improvement of the product, we reserve the right to change the specification without
More informationProduct data sheet Dynaxe - L162GD Valves High Performance - Double Excentric Dynaxe L162
DESIGN Body Flangeless wafer type (lugged) End Connection EN 1092 PN 25, 40 ASME B16.5 cl. 300 / B16.47 cl. 300 MSS SP 44 cl. 300 Face to Face EN558-1/2 Series 16 Disc Seat Replaceable Shaft Seal Design
More informationISO INTERNATIONAL STANDARD. Bolted bonnet steel gate valves for the petroleum, petrochemical and allied industries
INTERNATIONAL STANDARD ISO 10434 Second edition 2004-07-15 Bolted bonnet steel gate valves for the petroleum, petrochemical and allied industries Robinets-vannes en acier à chapeau boulonné pour les industries
More informationCast Steel Bolted Bonnet Stop Check Valves Sizes: 2 thru 14 Pressure Class: 150 thru 1500
ast Steel olted onnet Stop heck Valves Sizes: 2 thru 14 Pressure lass: 150 thru 1500 Manufactured by Newmans 45 Newco ast arbon Steel olted onnet Valves Typical Newco ast Steel olted onnet Stop heck Valve
More informationINTERNATIONAL STANDARD
INTERNATIONAL STANDARD ISO 15761 First edition 2002-12-15 Steel gate, globe and check valves for sizes DN 100 and smaller, for the petroleum and natural gas industries Robinets-vannes, robinets à soupape
More informationCAST IRON NON-RETURN VALVE SWING TYPE (Reflux Valve)
about us With the "COMMITMENT TO EXCELLENCE" drive, NVR is becoming a foremost name in bronze, brass, cast iron, cast seel and forged steel valves for domestic and industrial applications. Having the most
More informationORBIT Valves STANDARD FEATURES
ORBIT Valves STANDARD FEATURES Cameron s ORBIT valves are ideal for applications when zero leakage and frequent operation are demanded. They are used globally in gas processing plants using molecular sieve
More information3.2 HP 114 HIGH PERFORMANCE BUTTERFLY VALVE HP 114 TECHNICAL DATA FEATURES GENERAL APPLICATIONS
TECHNICAL DATA Nominal diameter: DN 50 - DN 1200 Metallically up to DN 800 max. PN 16 Face-to-face: EN 558 Series 20, optional Series 25 ISO 5752 Series 20 API 609 Table 1 Flange accommodation: EN 1092
More informationValves that bear the Hallmark of Quality
Valves that bear the Hallmark of Quality The Company with Commitment Reliability Innovation C.R.I. has now become a household name associated with water lifting pumps be it for Residential, Agriculture,
More informationPRODUCT RANGE. Ball Valve Butterfly Valve Gate Valve Globe Valve Check Valve Forged Valve. Information:-
PRODUCT RANGE Ball Valve Butterfly Valve Gate Valve Globe Valve Check Valve Forged Valve Information:- www.invacovalves.com invacovalves@gmail.com support@invacovalves.com +91 9619 010 130 +91 9920 900
More informationMETAL SEATED BUTTERFLY VALVES
QF Series QUARTER TURN VALVES METAL SEATED BUTTERFLY VALVES PROCESS VALVES HIGH PERFORMANCE BUTTERFLY VALVES Triple Eccentric Butterfly Valve Code: QFTM Fire safe tested API 6FA Jacket connections (oil
More informationBONT BONT BONT. Forged Steel Gate Valves. NPS 1/2 2 ASME Class 800 & Forged Steel Globe Valves. NPS 1/2 2 ASME Class 800 & 1500
BONT Forged Steel Gate Valves NPS 1/2 2 ASME Class 800 & 1500 BONT Forged Steel Globe Valves NPS 1/2 2 ASME Class 800 & 1500 BONT Forged Steel Check Valves NPS 1/2 2 ASME Class 800 & 1500 GENERAL INFORMATION
More informationSize : Ends : Min Temperature : Max Temperature : Materials : Carbon steel
Size : Ends : Min Temperature : Max Temperature : DN 50 to DN 300 ( NPS 2 to 12 ) Flanges R.F. CLASS 150 (PN20) - 29 C + 425 C Max Pressure : 20 Bars Specifications : Rising rotating stem Bolted bonnet
More informationCarbon steel or Stainless steel
MADE OF STAINLESS... Size : Ends : Min Temperature : Max Temperature : DN 8 to DN 50 Butt Welding, Socket welding or straight welding - 30 C in stainless steel and -20 C in carbon steel + 180 C Max Pressure
More informationSoft Seated Butterfly Valves Ductile Iron Wafer Body ANSI/ASME to 6 Sizes
Soft Seated Butterfly Valves Ductile Iron Wafer Body ANSI/ASME 150 2 to 6 Sizes SERIES Features ISO5211 top mounting for manual, air or electric actuators Unique wave line seat reduces torque and extends
More informationManufacturing Standard. Testing Standard BS Specification >> Female Ends
Manufacturing Standard BS 5351 6 to 50mm Screwed End BSPT/NPT/BSP Female Ends Precision INVESTMENT CASTING BODY/CAP Manufacturing Standard BS 5351, API 6D 15 to 100mm Flanges as per ANSI B16.5Raised Face
More information1.2 REFERENCES.1 American National Standards Institute (ANSI)/American Society of Mechanical Engineers (ASME).
Issued 2005/06/01 Section 15112 Valves Cast Iron, Gate, Globe, Check Page 1 of 8 PART 1 GENERAL 1.1 RELATED SECTIONS.1 Section 01355 Waste Management and Disposal 1.2 REFERENCES.1 American National Standards
More informationSaidi Spain BALL VALVES. Product Catalogue. English version. for the process industry
Saidi Spain BALL VALVES Product Catalogue English version for the process industry BALL VALVES Product Catalogue 2 Saidi Spain 3 4 Saidi Spain TABLE OF CONTENTS MATERIAL TYPE SERIES PAGE No. BALL VALVES
More informationFLANGE DIMENSIONS TABLE TYPES
ADELAIDE BRISBANE PERTH OVERVIEW FLANGE DIMENSIONS TABLE TYPES In Australia the BS and AS flange standards are essentially the same but have been metricated. Consequently metric sizes are stated as DN
More informationOperation Manual for Metal Sealing Butterfly Valve
DOC NO.: HT/CE.DJ75 REV NO.: 2006 Operation Manual for Metal Sealing Butterfly Valve HT343SH-16C DN80 ~ 600 HT373SH-16C DN80 ~ 600 Controlled Version No Non-Controlled Version Prepared by Reviewed by Approved
More informationSECTION TAPPING SLEEVES AND VALVES
SECTION 33 12 16.17 TAPPING SLEEVES AND VALVES PART 1: GENERAL 1.01 SCOPE Furnish, install and test all tapping sleeves, tapping valves, and tapping saddles as shown on the Drawings. 1.02 RELATED WORK
More informationA. This Section includes the following general-duty valves: 1. Division 15 Section "Mechanical Identification" for valve tags and charts.
D-9 OUTLINE SPECIFICATION FOR HTHW VALVES PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 1 Specification
More informationCryogenic Metal Seated Butterfly Valves
Cryogenic Metal Seated Butterfly Valves The Key to Cryogenic Valve Solutions VELAN S.A.S VELAN Inc Group VELAN inc is one of the world's leading independent manufacturer of steel gate, globe, check, butterfly
More informationMaterials : Carbon steel or Stainless steel
Size : Ends : Min Temperature : Max Temperature : DN 8 to DN 50 Butt Welding, Socket welding or straight welding - 30 C in stainless steel and -20 C in carbon steel + 180 C Max Pressure : 138 Bars (Class
More informationSUFA STEEL GLOBE VALVES CLASS 150/300/600/900/1500/2500 SUFA TECHNOLOGY INDUSTRY CO. LTD., CNNC
SUFA STEEL GLOBE VALVES CLASS 150/300/600/900/1500/2500 SUFA TECHNOLOGY INDUSTRY CO. LTD., CNNC INTRODUCTION Globe valves are used where throttling or both throttling and shut off are required. They can
More informationNEOTECHA NXR PFA LINED BALL VALVES
These PFA lined ball valves are used in a wide variety of applications in many industries FEATURES GENERAL APPLICATION The valves are ideally suited for corrosive applications, requiring reliable performance,
More informationProduct Range. Neway Cast Carbon Steel Gate,Globe & Check Valves. Valve Size. Gate Valve Globe Valve Check Valve. API 600 & B16.34 Bolted Bonnet Valve
Product Range Neway Cast Carbon Steel Gate,Globe & Check Valves. Valve Size 2" 2.5" 3" 4" 5" 6" 8" 10" 12" 14" 16" 18" 20" 24" 26" 28" 30" 32" 36" 40" 42" 48" 52" 54" 56" 60" 64" 150 API 600 & B16.34 Bolted
More informationBULLETIN B NOVEMBER DeZURIK KSV SEVERE SERVICE KNIFE GATE VALVES TECHNICAL SPECIFICATIONS
BULLETIN 51.00-1B NOVEMBER 2016 DeZURIK KSV SEVERE SERVICE KNIFE GATE VALVES TECHNICAL SPECIFICATIONS Materials of Construction Class 150/300 Bonnetless Item Description Material A1 Body Carbon Steel,
More informationAVK Couplings and Adaptors
AVK SAUDI VALVES AVK Couplings and Adaptors Solutions for All Applications 2 A Comprehensive Range of Couplings and Adaptors Product quality The complete coupling range is manufactured by AVK in accordance
More informationANSI CLASS 150/300/ 600 PN 10/16/25/40/ 64
ANSI CLASS 150/300/ 600 PN 10/16/25/40/ 64 HIGH-SEAL features Suitable for a wide range of applications from vacuum to very high pressure and low to very high temperature services. Also suitable for severe
More informationIron Check Valves & Y-Strainers Illustrated Index
Iron Check Valves & Y-Strainers Illustrated Index Iron Body Swing Check Valve Bronze Mounted or All Iron 125 lb. SWP 200 lb. CWP Iron Body Swing Check Valve Bronze Mounted 250 lb. SWP 500 lb. CWP Lead
More informationProcess Interface Valves
www.swagelok.com Process Interface s Kenmac Series Process Interface s and Process Monoflanges Stainless steel, carbon steel, and duplex stainless steel materials Pressure ratings in accordance with ASME
More informationYARWAY HANCOCK CONTINUOUS BLOWDOWN GLOBE VALVE SERIES 5505
Advanced construction features of this high pressure drop angle globe valve provide quality and long service life. FEATURES GENERAL APPLICATION In addition to continuous blowdown service, the Yarway high
More informationBaumann 24000F Wafer Body Control Valve
24000F Valve Product Bulletin Baumann 24000F Wafer Body Control Valve The Baumann unique 24000F wafer style control valve mates with ASME and EN line flange connections and is designed to control a wide
More informationD-1 FIRE PROTECTION PRODUCTS TAPPING VALVE. MUELLER Tapping Valves. MUELLER Tapping Sleeves and Crosses. MUELLER Stainless Steel Tapping Sleeves
TAPPING VALVE MUELLER Tapping Sleeves and Crosses Full range of Tapping Sleeves and Crosses to fit most types of pipe including cast iron, ductile iron, A-C, and cast iron O.D. PVC--Also outlet sealed
More information88A-200 SERIES CARBON STEEL ASME CLASS 150 FLANGED FULL PORT BALL VALVE - 1/2 THRU 1
CARBON STEEL ASME CLASS 150 FLANGED FULL PORT BALL VALVE - 1/2 THRU 1 STANDARD LIST PART (1/2 & 3/4 VALVES) 2 Retainer ASTM A108 Type 1215 3 Ball ASTM A108 Type 1215 8 Stem Nut 300 Series Stainless Steel
More informationDOUBLE OFFSET BUTTERFLY VALVES SERIES 2E 5
ABsOlute flow control DN 50 - DN 500 (2-20 ) - 100 C + 500 C // Oil & Gas // Power Generation // Petrochemical Industry DOUBLE OFFSET BUTTERFLY VALVES SERIES 2E 5 WWW.ABOVALVE.COM GENERAL INFORMATION -
More informationSEMPELL. High Pressure Steam Bypass Valves - Type 115 ASME.
SEMPELL Steam Turbine and Boiler protection at Steam Turbine trip. Steam Turbine bypass to Cold Reheat or Condenser while Boiler/Turbine start-up and shut-down. Features and Benefits Pressure reduction
More informationSQUARE PORT KNIFE GATE VALVE
SQUARE PORT KNIFE GATE VALVE The SERIES 90 knife gate is a square port low-pressure valve for solid loaded fluids, mainly used in bulk handling and silo outlet applications in industries such as: Power
More informationProduct Range. Neway Cast Carbon Steel Gate,Globe & Check Valves. Valve Size. Gate Valve Globe Valve Check Valve. API 600 & B16.34 Bolted Bonnet Valve
Product Range Neway Cast Carbon Steel Gate,Globe & Check Valves. Valve Size 2" 2.5" 3" 4" 5" 6" 8" 10" 12" 14" 16" 18" 20" 24" 26" 28" 30" 32" 36" 40" 42" 48" 52" 54" 56" 60" 64" 150 API 600 & B16.34 Bolted
More informationAll definitions are defined according to ANSI/AWWA C b. Flanged Joint: The flanged and bolted joint as described in ANSI/AWWA C110/A21.10.
21-02 SAN ANTONIO WATER SYSTEM SPECIFICATIONS FOR RESILIENT-SEATED GATE AND TAPPING VALVES FOR WATER SUPPLY SERVICE ANSI/AWWA C509-01 3 IN., 4 IN., 6 IN., 8 IN., 10 IN., 12 IN., 16 IN., & 20 IN. Revised
More informationM21Si ISO and M21Vi ISO Ball Valves DN15 to DN150
Local regulations may restrict the use of this product to below the conditions quoted. In the interests of development and improvement of the product, we reserve the right to change the specification without
More informationM21Si ISO and M21Vi ISO Ball Valves DN15 to DN150
Page 1 of 6 TI-P133-77 ST Issue 1 M21Si ISO and M21Vi ISO Ball Valves DN15 to DN150 Description Both the M21Si and M21Vi are reduced bore ball valves, with a single piece body, having ISO mounting as standard.
More informationFLANGE DIMENSIONS TABLE TYPES
ADELAIDE BRISBANE PERTH OVERVIEW FLANGE DIMENSIONS TABLE TYPES In Australia the BS and AS fl ange standards are essentially the same but have been metricated. Consequently metric sizes are stated as DN
More informationType 431, 433 PN 160. Facts. Flanged Safety Relief Valves spring loaded. The-Safety-Valve.com. Metric Units LWN E
Type 431, 433 PN 160 Metric Units Flanged Safety Relief Valves spring loaded Facts The-Safety-Valve.com LWN 465.03-E 40 Cap H2 18 Adjusting screw with bushing 19 Lock nut 16 Upper spring plate 12 Spindle
More informationMV en /7 MV Knife gate valve DN
1/7 The Stafsjö knife gate valve is a valve designed for a wide range of process industry applications. Its main applications are fluids and suspensions up to 5%. It is also used in services with sludge,
More informationGlobe Valve. Regulating. Service
Globe Valve Regulating Service Globe Valves FM Globe Valves are used in applications requiring throttling and frequent operations. FM Parabolic, Vee-type regulating, Swivel and guided plug and stem, Soft
More informationKTM METALTITE BALL VALVES FLOATING AND TRUNNION TYPE
Metaltite metal seated ball valves have excellent sealing characteristics suitable for various fluids services with a wide range of operating temperatures FEATURES GENERAL APPLICATION Clean fluids, dirty
More informationMaterials : Ductile iron body EN GJS 500-7
Certificate 3.1 Size : Ends : Min Temperature : Max Temperature : DN 40 to DN 1000 PN10/16 flanges - 10 C + 70 C with EPDM wedge Max Pressure : 16 Bars up to DN400, 10 bars over Specifications : Non rising
More informationDUCTILE IRON PIPES AND FITTINGS DETAILED PRODUCTS SPECIFICATIONS
DUCTILE IRON PIPES AND FITTINGS DETAILED PRODUCTS SPECIFICATIONS General All Materials shall be EN, ISO or equivalent standard and shall be supplied from approved manufacturers. According to the International
More informationMaterials : Ductile iron body EN GJS 500-7
Certificate 3.1 Size : Ends : Min Temperature : Max Temperature : DN 40 to DN 600 Flanges PN10/16-10 C + 70 C Max Pressure : 16 Bars up to DN400, 10 bars over Specifications : Non rising stem Clockwise
More informationAll definitions are defined according to ANSI/AWWA C
SAN ANTONIO WATER SYSTEM SPECIFICATIONS FOR REDUCED-WALL, RESILIENT-SEATED GATE AND TAPPING VALVES FOR WATER SUPPLY SERVICE 4 IN. THROUGH 48 IN. ANSI/AWWA C515-01 July 2017 1. SCOPE This product specification
More informationFOR STANDARDS COMPLIANCE AND STANDARD FEATURES REFER TO PAGE D-3. STANDARD MATERIAL LIST
88A-900 SERIES CARBON STEEL ASME CLASS 300 FLANGED FULL PORT BALL VALVE - 1/2 THRU 1 FOR STANDARDS COMPLIANCE AND STANDARD FEATURES REFER TO PAGE D-3. STANDARD LIST PART (1/2 & 3/4 VALVES) 2 Retainer ASTM
More informationFOR STANDARDS COMPLIANCE AND STANDARD FEATURES REFER TO PAGE D-3. STANDARD MATERIAL LIST
88A-200 SERIES CARBON STEEL ASME CLASS 150 FLANGED FULL PORT BALL VALVE - 1/2 THRU 1 FOR STANDARDS COMPLIANCE AND STANDARD FEATURES REFER TO PAGE D-3. STANDARD LIST PART (1/2 & 3/4 VALVES) 2 Retainer ASTM
More informationBolted Two Piece Carbon Steel and Stainless Steel FLOATING BALL VALVE
Bolted Two Piece Carbon Steel and Stainless Steel FOATING BA VAVE Floating Valve Features: Bolted -Piece Construction Cast Steel 50 & 00 Forged Steel 00 to 500 Fire safe SS trim/cs ENP All valves NACE
More informationFLY SERIES CONTROL VALVES
FLY SERIES CONTROL VALVES Product Features Fly Series - Control Valves Armstrong Delta2 - FLY SERIES is a globe single seat Control Valve with a robust construction designed for a wide range of process
More informationGate Valves Swing Check Valves
EN DIN Gate Valves Swing Check Valves Contents Contents...2 Company Profile...3 Engineering...4 Manufacturing...5 Warehouse...6 Testing & Checking...7 Quality System...8 Environment...9 CE Mark...10 Atex...11
More informationCOMMERCIAL VALVES. When QUALITY, SERVICE and PRICE MATTER MOST! GATE VALVES GLOBE VALVES CHECK VALVES BUTTERFLY VALVES
COMMERCIAL CONSTRUCTION FIRE PROTECTION HVAC IRRIGATION MINING WATER & WASTE MANAGEMENT OIL & GAS POWER GENERATION When QUALITY, SERVICE and PRICE MATTER MOST! COMMERCIAL VALVES GATE VALVES GLOBE VALVES
More informationNELES TRUNNION MOUNTED, BALL VALVES, FULL BORE, SERIES X
NELES TRUNNION MOUNTED, BALL VALVES, FULL BORE, SERIES X Metso's Neles series X is a trunnion modular ball valve. Neles X series valves incorporate robust stem to ball connection. This assures valves are
More informationNEWCO. Cast Steel Valves. Technical Data TC9308-3
NEWCO Cast Steel Valves Technical Data All the information contained in this manual is the exclusive property of Cameron. Any reproduction or use of the calculations, drawings, photographs, procedures
More informationMaterials : Carbon steel or Stainless steel MERXTRADE BV.
ADE B.V. Size : DN 1/4 to DN 2 Ends : Threaded female BSP, NPT or S.W. Min Temperature : - 30 C in S.S. and - 20 C in carbon steel Max Temperature : + 180 C Max Pressure : 138 Bars (Class 800) Specifications
More informationFLANGED END BALL VALVE
Specification: - Chem Oil s two-piece ball valve has been designed to handle extreme service applications with unsurpassed reliability. Valve body machined from solid wrought material providing maximum
More informationRegulating valves REG 6-65, REG-SS 15-40
MAKING MODERN LIVING POSSIBLE Technical brochure Regulating valves REG 6-65, REG-SS 15-40 REG are angle-way and straight-way regulating valves, which act as normal stop valves in closed position. The valves
More informationº to 150º F In accordance with this specification and
SPEC-3006 2016/0/18 1/10 1.0 PURPOSE This specification describes the minimum requirements gland water piping systems operating at or below 400 PSIG. Gland water systems are to be constructed either of
More informationKTM METALTITE BALL VALVES FLOATING AND TRUNNION TYPE
Metaltite metal seated ball valves have excellent sealing characteristics suitable for various fluids services with a wide range of operating temperatures FEATURES GENERA APPICATION Clean fluids, dirty
More informationMetal Seated Ball Valves
VALVES AND PIPELINE SUPPLIES Metal Seated Ball Valves FAST TRACK SUPPLY CLASS V & VI SHUT OFF The production of a zero maintenance, high performance metal seated valve has been the goal of many engineers.
More informationCOMPLETE REVISION May Process Industry Practices Piping. PIP PNSM0110 Purchasing Requirements for Valves
May 2013 Process Industry Practices Piping Purchasing Requirements for Valves PURPOSE AND USE OF PROCESS INDUSTRY PRACTICES In an effort to minimize the cost of process industry facilities, this Practice
More informationUL / FM D-1 FIRE PROTECTION PRODUCTS TAPPING VALVE. MUELLER Tapping Sleeves and Crosses. MUELLER Tapping Valves
UL / FM TAPPING VALVE SECTION Rev. 2-15 MUELLER Tapping Sleeves and Crosses Full range of Tapping Sleeves and Crosses to fit most types of pipe including cast iron, ductile iron, A-C, and cast iron O.D.
More information88A-100 SERIES CARBON STEEL ASME CLASS 150 FLANGED STD. PORT BALL VALVE THRU 2
CARBON STEEL ASME CLASS 150 FLANGED STD. PORT BALL VALVE - 1.5 THRU 2 STANDARD LIST 2 Retainer ASTM A108 Type 1215 9 Gland Plate 302 or 304 SS 10 Stem Nut 316 SS ASTM A108, Carbon Steel, Chrome Plated
More informationProduct data sheet. Wouter Witzel - EVS PDS B
PRODUCT DATA General Description BUTTERFLY VALVE - Centric rubber lined Design Code EN 593 Size Range DN 50-1400, NPS 2-56 Maximum Pressure 10/16 bar 20 bar for DN 600 DESIGN Body Flangeless wafer type
More information12.1 MUELLER TAPPING MATERIALS AND SPECIALTY VALVES. MUELLER Tapping Sleeves and Crosses. MUELLER Tapping Valves. MUELLER Stainless Steel Tapping
MUELLER TAPPING MATERIALS AND SPECIALTY VALVES 12.1 Shaded area indicates change Rev. 7-16 MUELLER Tapping Sleeves and Crosses Full range of Tapping Sleeves and Crosses to fit most types of pipe including
More informationNELES TRUNNION MOUNTED, BALL VALVES, FULL BORE, SERIES XH
NELES TRUNNION MOUNTED, BALL VALVES, FULL BORE, SERIES XH With over 40 years of experience with trunnionmounted ball valves, Metso has designed this ball valve to mount on two large, low-friction trunnion
More informationKLINGER BALLOSTAR KHA
KLINGER BALLOSTAR KHA - DN 0-50 www.klinger-schoeneberg.de trusted. worldwide. MF 0 CONSISTENTLY MODULAR One product many applications PRODUCT ADVANTAGES Maintenance-free Supports pressurization on both
More information87A-200 Series. Stainless Steel ASME Class 150 Flanged Full Port Ball Valve - 1/2 through 1
87A-200 Series Stainless Steel ASME Class 150 Flanged Full Port Ball Valve - MATERIALS OF CONSTRUCTION Description (1/2 & 3/4 Valves) Material 2. Retainer ASTM A276 Type 316 3. Ball ASTM A276 Type 316
More informationGD Valves Rubber Lined - Centric EVS. Wouter Witzel - EVS /
DESIGN Body Flangeless wafer type End Connection EN 1092 PN 6, 10 and 16 ASME B16.5 cl. 150 / B16.47 cl. 150 MSS SP 44 cl. 150 AWWA C207 cl. B, D and E BS 10 table D and E JIS 5K/10K/16K Face to Face EN558-1/2
More information87A-100 Series. Stainless Steel ASME Class 150 Flanged Std. Port Ball Valve -
87A-100 Series Stainless Steel ASME Class 150 Flanged Std. Port Ball Valve - 1-1/2 through 2 MATERIALS OF CONSTRUCTION Description Material 1. Body ASTM A351 CF8M 2. Retainer ASTM A276 Type 316 3. Ball
More informationSAVA. Design Features. Special cross-over combinations for Safety (Relief) valves
SAVA Special cross-over combinations for Safety (Relief) valves DIN: 25E 500E / PN 10 40 ASME: NPS 1 E 20 E / class 150 300 PT range: -30 < T < 230/280 C, vacuum 10-8 mbar Design Features Design Characteristics
More informationM15 ISO Ball Valve DN¼" to DN2½"
Local regulations may restrict the use of this product to below the conditions quoted. In the interests of development and improvement of the product, we reserve the right to change the specification without
More information