Percon 17 Copper Alloy Conductor Wire
|
|
|
- Jeffrey Melton
- 5 years ago
- Views:
Transcription
1 Introduction Percon 17 was developed to replace cadmium copper C162, specifically soft temper cadmium copper. This alloy is also available in hard temper. Key Attributes Is not engineered for Conductors specifying ASTM B624 [see Percon 24 and Percon 28] Does not contain any cadmium or environmentally hazardous elements. Has excellent resistance to corrosive environments. Percon 17 is available in bare, or plated with silver, nickel, or tin.
2 Physical Properties and Specifications PHYSICAL PROPERTIES HARD DRAWN SOFT SPECIFICATIONS ASTM B250 Tensile 95 ksi 58 ksi Elongation 1% 6% ASTM B465 ASTM B888 Electrical Conductivity 80% 68 F 85% 68 F Electrical Resistivity ºF ºF Melting Point 1986ºF 1986ºF Density lbs/in lbs/in 3 Thermal Coefficient of Resistance /ºF /ºF PHYSICAL PROPERTIES - METRIC HARD DRAWN SOFT Tensile 655 MPa 400 MPa Elongation 1% 6% Electrical Conductivity ºC ºC Electrical Resistivity ºC 20ºC Melting Point 1078ºC 1078ºC Density 8.83 g/cm g/cm 3 Thermal Coefficient of Resistance /ºC /ºC
3 Alloy Characteristics ALLOY NAME TEMPER TENSILE CONDUCTIVITY ELONGATION FLEX LIFE MECHANICAL PROCESSING AVAILABLE PLATINGS SOFTENING RESISTANCE COPPER Soft 32, % 15% P E S, N, T - COPPER Hard 60,000 96% 1% P E S, N, T P PERCON 24 Soft 60,000 90% 8% E E S, N E C18135 Soft 60,000 90% 8% E E S, N E PERCON 11 Hard 80,000 90% 1/5 G VG S, N, T VG PERCON 17 Soft 58,000 85% 6% G E S, N VG PERCON 17 Hard 95,000 80% 1% VG E S, N, T G PERCON 19 Hard 110,000 73% 1% E E S, N, T G CALCIUM COPPER Hard 100,000 80% 1% VG VG S, N, T G CCS (40%) Hard 110,000 39% 1% E G S, N, T G E = Excellent, VG = Very Good, G = Good, P = Poor, S = Silver Plate, N = Nickel Plate, T = Tin Plate
4 7-Strand Constructions BARE PERCON 17 HARD DRAWN 24 7/ / / / / / , / , / , BARE PERCON 17 SOFT TEMPER 22 7/ / / / / / / , / , / ,
5 19-Strand Unilay Constructions BARE PERCON 17 HARD DRAWN 18 19/ / / / / / / /44 (1) /46 (1) , (1) True Concentric BARE PERCON 17 SOFT TEMPER 18 19/ / / / / / / /44 (1) /46 (1)
6 Single End Constructions BARE PERCON 17 HARD DRAWN Nom , , , , , ,121 3, ,440 4, ,848 6, ,339 7, ,054 10, ,731 12, ,888 16, ,234 20, ,094 26, ,365 34, ,205 43, ,159 56,
7 BARE PERCON 17 SOFT TEMPER Nom , , , , , ,055 3, ,356 4, ,674 5, ,118 6, ,767 9, ,380 11,
Percon 28 Copper Alloy Conductor Wire
Introduction Percon 28 is engineered to have 33% greater minimum break strength with the same electrical conductivity of ASTM B 624 conductors. This alloy allows wire and cable system designers performance
Copper Clad Steel (40%) Conductor Wire
Introduction Copper Clad Steel (CCS) is a composite conductor material containing a low carbon steel core surrounded by copper. The copper provides the electrical conductivity, and the steel contributes
Alloy Conductors. Percon Alloys. Percon HS95: A high strength, high conductivity conductor with 655 N/mm 2 strength and 63% IACS.
ALLOY CONDUCTORS Alloy Conductors RoHS compliant alloy conductors were originally invented by Fisk Alloy. Continuously innovating, we now produce a family of high performance alloy conductors, PERCON.
316Ti Stainless Steel, UNS S31635
316Ti Stainless Steel, UNS S31635 Shaped, Flat, Square, Round, Fine Wire, Plated and Un-plated ASTM A240 316Ti Alloy Description Type 316Ti is a titanium stabilized variation of alloy 316. This austenitic
Custom 450 Stainless Steel, UNS S45000
Custom 450 Stainless Steel, UNS S45000 Shaped, Flat, Square, Round, Fine Wire, Plated and Bare Wire Specifications: AMS5763, AMS 5773, AMS 5863, ASTM A 564, ASTM A693, ASTM A 959 Custom 450 Alloy Description
Custom 455, UNS S45500
Custom 455, UNS S45500 Shaped, Flat, Square, Round, Fine Wire, Plated and Un-plated Specifications: AMS 5617, AMS 5860, ASTM A313 ASTM A564, ASTM A693 Custom 455 Alloy Description Custom 455 stainless
Copper Alloy. LEADED Red BRASS ( ) C Al Amana Foundry We Make The Quality By Experience And Science
LEADED Red BRASS (85-5-5-5) C83600 Tensile Strength, Ksi 30 Tensile Strength, Mpa 207 Yield Strength, Ksi 14 Yield Strength, Mpa 97 Elongation in 2 inch 20 Density g/cm3 8.83 Electrical Conductivity IACS
C Chemical Composition. Copper Alloy Data C Tradename: Beryllium Copper. Designation: Active? True. Inactive Date:
Copper Alloy Data C17510 C17510 Tradename: Beryllium Copper Designation: Active? True Inactive Date: US EPA Registered Antimicrobial? True Chemical Composition Element Cu (1,2) Fe Ni Al Be Co Si Min (%)
High Performance Alloys. Characteristics
Alloy Designation EN DIN CEN/TS 13388 UNS High Performance Alloys Chemical Composition Weight percentage We have developed a wide range of high performance alloys with excellent properties regarding conductivity,
NiSPAN-C 902 (Alloy 902), UNS N09902
NiSPAN-C 902 (Alloy 902), UNS N09902 AMS 5221, AMS 5223, AMS 5225 Alloy 902 Wire Description Alloy 902is a precipitation hardenable nickel-iron with a controllable thermoplastic coefficient which is the
Copper & Copper Alloys CuZn31Si1 (OF 2270)
Copper and Copper Alloys Page 1 of 5 no responsibility is taken for the correctness of this information 02/2014 Cu Zn Pb Sn Fe Mn Ni Al Si As Co Cr Others min. 66.0 Rem. 0.1 - - - - - 0.7 - - - - max.
Copper & Copper Alloys CuZn40Pb2 (OF 2357)
Copper and Copper Alloys Page 1 of 6 no responsibility is taken for the correctness of this information 02/2014 Cu Zn Pb Sn Fe Mn Ni Al Si As Co Cr Others min. 57.0 Rem. 1.6 - - - - - - - - - - max. 59.0-2.2
C27200 CuZn37 Industrial Rolled
C272 Alloy Designation EN DIN CEN/TS 13388 (2.321) CW58L JIS C 272 BS CZ 17 UNS C272 Brass Rolled Products KME offers a wide range of brass rolled products in the form of strips, sheets and discs in order
Copper & Copper Alloys CuZn33Pb1.5AlAs (OF 2279)
Copper and Copper Alloys Page 1 of 5 no responsibility is taken for the correctness of this information 04/2014 Cu Zn Pb Sn Fe Mn Ni Al Si As Co Cr Others min. 64.0 Rem. 1.2 - - - - 0.8-0.02 - - - max.
Industrial Rolled. High Performance STOL Alloys. Characteristics. Capacity. Density 8.8 g/cm³. Thermal expansion coefficient C 17.
Alloy Designation High Performance STOL Alloys EN DIN CEN/TS 13388 UNS Chemical Composition Weight percentage Cu 99. % Mg.4...9 % P.2...4 % This alloy is in accordance with RoHS 22/96/CE for electric &
Copper & Copper Alloys CuZn38As (OF 2765)
Copper and Copper Alloys Page 1 of 5 no responsibility is taken for the correctness of this information 04/2014 Cu Zn Pb Sn Fe Mn Ni Al Si As Co Cr Others min. 61.5 Rem. - - - - - - - 0.02 - - - max. 63.5-0.2
High Performance Alloys. Characteristics
Alloy Designation EN DIN CEN/TS 13388 UNS High Performance Alloys Chemical Composition percentage We have developed a wide range of high performance alloys with excellent properties regarding conductivity,
Industrial Rolled. High Performance STOL Alloys. Characteristics. Capacity. xx xx xx xx x x. Density 8.93 g/cm³
Alloy Designation High Performance STOL Alloys EN CW 117 C* DIN CEN/TS 13388 UNS * chemical composition of STOL 8 has a higher Sn content up to,2 % We have developed a wide range of high performance alloys
High Performance Alloys. Characteristics. Stamped parts connectors Relay springs Semiconductor components. Density 8.8 g/cm³
Alloy Designation High Performance Alloys EN CuNi3Si DIN CEN/TS 13388 UNS Chemical Composition percentage Cu Rest % Ni 3 % Si.65 % Mg.15 % This alloy is in accordance with RoHS 22/96/CE for electric &
High Performance STOL Alloys. Characteristics. Current Carrying Capacity. Density 8.9 g/cm³. Specific heat capacity J/(g K)
Alloy Designation High Performance STO Alloys EN - DIN CEN/TS 13388 - UNS Chemical Composition percentage Cu Rest % Ni 1.4.. 1.7 % Si 0.2.. 0.35 % Sn 0.02.. 0.3 % Zn 0.20.. 0.7 % Others 0.50 % This alloy
ATI 15-7 ATI Technical Data Sheet. Semi-Austenitic Stainless Steel INTRODUCTION
ATI 1-7 Semi-Austenitic Stainless Steel (UNS S1700) INTRODUCTION ATI 1-7 Precipitation Hardening Alloy (S1700, AISI Type 632) is a chromium-nickel-molybdenum-aluminum semi-austenitic precipitation hardening
Copper & Copper Alloys
Copper and Copper Alloys Page 1 of 6 No responsibility is taken for the correctness of this information 12/2016 Cu Zn Pb Sn Fe Mn Ni Al Si As Co Cr Others min. 58 Rem. - 0.1 0.35 1.8-1.4 0.6 - - - - max.
Copper & Copper Alloys CuZn38Pb2 (OF 2361)
Copper and Copper Alloys Heiligenstraße 70 41751 Viersen Phone +49 2162 956-6 FAX +49 2162 956-762 duelken@otto-fuchs.com Page 1 of 5 no responsibility is taken for the correctness of this information
MuShield s High Permeability Magnetic Shielding per ASTM A753 Alloy Type 4
MuShield s High Permeability Magnetic Shielding per ASTM A753 Alloy Type 4 Available in coil, sheet, rod, billet, wire, and bar form, MuShield s High Permeability Magnetic Shielding is a soft magnetic
AL 29-4C AL 29-4C. Technical Data Sheet. Stainless Steel: Superferritic INTRODUCTION (UNS S44735)
AL 29-4C Stainless Steel: Superferritic (UNS S44735) INTRODUCTION AL 29-4C alloy, is a superferritic stainless steel developed by ATI in the early 1980s specifically for power plant surface condenser tubing.
LEONI Histral High strength alloys
1 The Quality Connection Histral R15 CuSn6 Bronze 6 EN 12166 DIN CEN/TS 13388 Medium electrical conductivity Excellent mechanical properties Heating elements with low heating conductor temperature Enamelled
Brass Alloy SM Chemical Composition. Dimensions. Physical Properties. Technical Data Sheet Alloys. Density kg/m Melting temperature
Chemical Composition Comparable standards ISO: CuZn33 ASTM: UNS 26800 EU: CW 506L JIS: C2680 Element Unit Range Copper % 64-68.5 Lead % max. 0.05 Iron % max. 0.05 Zinc - remainder Dimensions Nominal width
Copper & Copper Alloys CuNi1Si (OF 2403)
Copper and Copper Alloys Page 1 of 5 no responsibility is taken for the correctness of this information 04/2014 Cu Zn Pb Sn Fe Mn Ni Al Si As Co Cr Others Min. Rem. - - - - - 1.0-0.4 - - - - Max. - - 0.02-0.2
Copper & Copper Alloys CuZn37Mn3Al2Si (OF 2291)
Copper and Copper Alloys Page 1 of 5 No responsibility is taken for the correctness of this information 05/2014 Cu Zn Pb Sn Fe Mn Ni Al Si As Co Cr Others min. 58 Rem. - 0.1 0.35 1.8-1.4 0.6 - - - - max.
C27000 CuZn36 Industrial Rolled
C27 Alloy Designation EN DIN CEN/TS 13388 (2.335) CW57L JIS C 27 BS CZ 18 UNS Chemical Composition Weight percentage C27 Cu 63.5.. 65.5 % Zn Rest % Ni.3 % Sn.1 % Fe.5 % This alloy is in accordance with
UNS:C70250, C70320 EN:CW112C
Rendering date: 2018-02-01 13:53:55 http://conductivity-app.org CuNi3Si UNS:C70250, C70320 EN:CW112C Manufactures list: Diehl Metall Stiftung & CO.KG (http://www.diehlmetall.de) - CuNi3Si (SB26) KM Europa
C26800 CuZn33 Industrial Rolled
C268 Alloy Designation EN DIN CEN/TS 13388 CW56L JIS C 268 BS CZ 13 UNS Chemical Composition Weight percentage C268 Cu 66.. 68 % Zn Rest % Ni.3 % Sn.1 % Fe.5 % This alloy is in accordance with RoHS 22/96/CE
Industrial Rolled. High Performance STOL Alloys. Characteristics. Capacity. Density 8.8 g/cm³. Thermal expansion coefficient C 17.
Alloy Designation High Performance STOL Alloys EN DIN CEN/TS 13388 UNS Chemical Composition percentage Cu 99. % Mg.4...9 % P.2...4 % This alloy is in accordance with RoHS 22/96/CE for electric & electronic
CuSn0,15 (STOL 81) C14415 Industrial Rolled
Alloy Designation EN DIN CEN/TS 13388 CuSn,15 CW 117 C High Performance CuSn,15 UNS * * Slight difference in chem. composition We have developed a wide range of high performance alloys with excellent properties
Beryllium Copper (BeCu) Fingerstrip Gaskets
Beryllium Copper (BeCu) Fingerstrip Gaskets EMC and Thermal Management Solutions Fothershield UNIT 3 GORRELLS WAY, TRANSPENNINE TRADING ESTATE, ROCHDALE, LANCS, UK. OL11 2PX E info@fothershield.co.uk T
COPPER ALUMINUM PARTS AND SUB-ASSEMBLIES
COPPER Copper Wire Rod... 06 Copper Anodes... 07 Copper Cathode Sheets... 07 Copper Ingots... 07 Single Wires... 08 Welding Wires... 08 Multiwires... 09 Stranded Wires... 10 Litz Cables... 11 Flat Wires,
C51100 CuSn4 Industrial Rolled
Alloy Designation Bronze Rolled Products EN DIN CEN/TS 13388 CW45K JIS C 5111 BS PB 11 UNS Chemical Composition Weight percentage Cu C511 Rest Sn 3.5 4.5 % P.3.35 % This alloy is in accordance with RoHS
ATI 201 HP /ATI 201L HP
Stainless Steel: Austenitic (UNS S20100 and S20103) GENERAL PROPERTIES and L austenitic stainless steels belong to the 200 series of Cr-Mn-Ni stainless alloys, which are similar to the 300 series of Cr-Ni
Beryllium-Copper Gaskets
STOCK SPRING-LINE Beryllium-Copper Gaskets SPRING-LINE Beryllium-Copper Gaskets SPRING-LINE beryllium-copper gaskets combine high levels of EMI shielding effectiveness with springfinger wiping and low
Bronze Rolled Products. Characteristics
Alloy Designation Bronze Rolled Products EN DIN CEN/TS 13388 CW453K JIS C 5210 BS PB 104 UNS Chemical Composition Weight percentage Cu C52100 Rest Sn 8 % P 0.1 % This alloy is in accordance with RoHS 2002/96/CE
Sn60Pb40 No Clean Solder Wire Technical Data Sheet
Description The 487 4877 of Sn6Pb4 No Clean Solder Wire is an electronic grade solder wire. It uses a classical tin-to-lead alloy ratio, which is complemented with a no clean, synthetically refined, splatter-proof,
Aircraft. Automotive. Electronic. Oil and Gas
4. Industry Applications of Copper Aircraft Heat Exchange Cable Assembly Terminals Couplers and Connectors Valves Automotive Radiators Brake Tubing Brake Lines Air Coolers Tubing for Master Cylinder Electronic
15-5 PH STAINLESS STEEL
Aerospace Chemical Food Processing Metalworking Paper Industries AK STEEL offers a combination of high strength and hardness, good corrosion resistance plus excellent transverse mechanical properties.
Material Specification
Semi-finished products Material Specification for strips of SPECIAL ALLOYS and COPPER Quality is our standard since 1864 Rolled products Special alloys - mechanical properties Alloy Temper Tensile strength
Sn63Pb37 No Clean Solder Wire Technical Data Sheet
Description The 486 4867 Sn63Pb37 No Clean Solder Wire is an electronic grade solder wire. It uses the eutectic tin-to-lead alloy ratio, which is complemented with a no clean, synthetically refined, splatter-proof,
C26800 CuZn33 Industrial Rolled
Alloy Designation EN DIN CEN/TS 13388 CW56L JIS C 268 BS CZ 13 UNS Chemical Composition percentage C268 Cu 67 % Zn Rest % This alloy is in accordance with RoHS 22/96/CE for electric & electronic equipments
Bromalloy 152. The ultimate. high-temperature, wear-resistant. and corrosive-resistant. material. specifically engineered. for the. glass industry.
Bromalloy 152 The ultimate high-temperature, wear-resistant and corrosive-resistant material specifically engineered for the glass industry. Bromalloy 152 High surface finish. Excellent edge retention.
Applications Potential
P R O D U C T D A T A B U L L E T I N STAINLESS 301STEEL UNS S30100 High Strength and Good Ductility When Cold Worked Excellent Corrosion Resistance Readily Welded Readily Formed and Drawn Economical Oxidation
Impact 7 Steel. A Durable, Dependable Steel Solution For Harsh Environments. Technical Data. Alloy Description. Alloy Type. Typical Applications
Impact 7 Steel Technical Data A Durable, Dependable Steel Solution For Harsh Environments Alloy Description As a world leader in steel manufacturing, TimkenSteel specializes in providing custom steel solutions
201 STAINLESS STEEL. Appliances. Architectural Applications. Automotive Trim. Cooking Utensils
201 STAINLESS STEEL Appliances Architectural Applications Automotive Trim Cooking Utensils TYPE 201 is an austenitic, chromium-nickel-manganese stainless steel that was developed originally to conserve
301 STAINLESS STEEL. Aircraft Structural Parts. Automotive Trim. Cooking Utensils. Roof Drainage. Subway Cars
301 STAINLESS STEEL Aircraft Structural Parts Automotive Trim Cooking Utensils Roof Drainage Subway Cars TYPE 301 is an austenitic, chromium-nickel stainless steel. This alloy is non-magnetic in the annealed
25 s/50g. The Effect of Compaction Pressure on Ancorsteel 85 HP with 0.5 w/o Zinc Stearate Green Density. Green Strength (MPa)
71-AS8HP-D-2 Pg 1 of 7 Ancorsteel 8 HP Typical Analysis and Properties Composition (weight %) (w/o) Ancorsteel 8 HP is a water atomized, prealloyed low-alloy steel powder for high performance applications.
SANDVIK SPRINGFLEX SF SPRING WIRE WIRE
SANDVIK SPRINGFLEX SF SPRING WIRE WIRE DATASHEET Sandvik Springflex SF is a duplex (austenitic-ferritic) stainless steel especially designed for spring applications with extremely high fatigue requirements.
Subway Cars. Applications Potential
301 STAINLESS STEEL P R O D U C T D ATA B U L L E T I N Aircraft Structural Parts Roof Drainage Cooking Utensils Automotive Trim Subway Cars Applications Potential Type 301 is an austenitic chromium-nickel
Aluminium Alloy Specifications
Aluminium is the world s most abundant metal and is the third most common element comprising 8% of the earth s crust. The versatility of aluminium makes it the most widely used metal after steel. Aluminium
Aluminum Alloy and Temper Designation Systems of the Aluminum Association
Introduction to Aluminum Alloys and Tempers J. Gilbert Kaufman, p9-22 DOI:10.1361/iaat2000p009 Copyright 2000 ASM International All rights reserved. www.asminternational.org CHAPTER 2 Aluminum Alloy and
Specification ALLOYED STEEL FOR QUENCHING AND TEMPERING, HIGH STRENGTH All.steel f.quen.a.temp, h.str.
Class: Heat-treatable steel Specification 16-09 ALLOYED STEEL FOR QUENCHING AND TEMPERING, HIGH STRENGTH Class No.:11 JED 723 Previous Edition Abbreviated Title 15-07 All.steel f.quen.a.temp, h.str. 8
SAC305 Lead Free Solder Wire (RA) Technical Data Sheet
Technical Data Sheet Description The SAC305 Lead Free Solder (RA) is an electronic grade, lead-free solder wire. It uses the predominant lead-free alloy composition and exceeds J-STD-006 purity specifications.
ARCAP AP1D AP1D lb/in³ 8.8 g/cm³ 240 Ohm circ mil/ft 40 microohm cm 212 F 572 F 932 F 1112 F 1832 F 100 C 300 C 500 C 600 C 1000 C
Identification VMI No. UNS No. Relevant Specifications Forms Description ARCAP C76350 n/a Strip Wire Bar Sheet Free Cutting bar and wire. Chemical Composition (%) Copper (+Silver) 61 Nominal Nickel (+Cobalt)
CORROSION-RESISTANT SILICONE GASKETS
CORROSION-RESISTANT SILICONE GASKETS 2 www.getelec.com 43 CORROSION-RESISTANT SILICONE GASKETS Guide to corrosion-resistant conductive materials by industry sector GETELEC has been developing its own MIL
speciality wires Solutions for automotive, aviation, Aerospace, Power distribution, Steel industry & consumer goods
speciality wires Solutions for automotive, aviation, Aerospace, Power distribution, Steel industry & consumer goods www.lamifil.be Lamifil Speciality wires Working with Lamifil means working with a partner.
CuSn0,5 UNS:C18835 EN:CW129C. Rendering date: :32:23
Rendering date: 2018-09-26 21:32:23 http://conductivity-app.org CuSn0,5 UNS:C18835 EN:CW129C CuSn(CuSn0,2 - CuSn0,5) material with 0,2-0,55% is tin addition id single phase copper alloy with good mechanical
C O R R O S I O N R E S I S T A N T P I P E S U P P O R T S Y S T E M
C O R R O S I O N R E S I S T A N T P I P E S U P P O R T S Y S T E M T R I * B O L T W I T H T R I * C O A T W I T H T R I * G U A R D T H E R M O P L A S T I C B A R T R I * B O L T U - B O L T W I T
speciality wires SOLUTIONS FOR AUTOMOTIVE, AVIATION, AEROSPACE, POWER DISTRIBUTION, STEEL INDUSTRY & CONSUMER GOODS
speciality wires SOLUTIONS FOR AUTOMOTIVE, AVIATION, AEROSPACE, POWER DISTRIBUTION, STEEL INDUSTRY & CONSUMER GOODS WWW.LAMIFIL.BE Lamifil Speciality wires Working with Lamifil means working with a partner.
ZINC DIE CASTING ALLOYS
ZINC DIE CASTING ALLOYS Overview Eastern Alloys manufactures the complete range of zinc die casting alloys. ZAMAK alloys were first developed during the 1920's by The New Jersey Zinc Company. The name
1.0 Introduction David Chapman
1. Introduction David Chapman 1.1. About this Guide Busbars are used within electrical installations for distributing power from a supply point to a number of output circuits. They may be used in a variety
Specification Product Form ASTM ASME AMS Federal or Military Plate, Sheet and Strip B 127 SB QQ-N-281 B 163 B165 B164 B564
ATI 400 Nickel-Base Alloy (UNS N04400) INTRODUCTION ATI 400 alloy (UNS N04400) is a ductile nickel-copper alloy with resistance to a variety of corrosive conditions. The alloy is most frequently applied
Nominal Composition. Weight % Nickel: 58 Balance Cobalt: 13.5 Iron:
HAYNES Waspaloy alloy Principle Features HAYNES Waspaloy alloy (UNS N07001) is an age-hardenable, nickel-based superalloy with very good strength at temperatures up to about 1800 F (980 C). It is widely
HAYNES 188 alloy. Principal Features
HAYNES 188 alloy Principal Features Excellent High-Temperature Strength and Environment Resistance HAYNES 188 alloy (UNS R30188) is a cobalt-nickel-chromium-tungsten alloy that combines excellent high-temperature
Cu-ETP C11000 Industrial Rolled
Alloy Designation Copper Rolled Products EN DIN CEN/TS 13388 Cu-ETP (E-Cu, E-Cu58) CW004A JIS C 1100 UNS We produce a vast assortment of copper rolled products with highest purity in various in chemical
ATI 718 ATI 718. Technical Data Sheet. Nickel-Base Superalloy INTRODUCTION FORMS AND CONDITIONS AVAILABLE SPECIFICATIONS. (UNS Designation N07718)
ATI 718 Nickel-Base Superalloy (UNS Designation N07718) INTRODUCTION ATI 718 alloy (N07718) is an austenitic nickel-base superalloy which is used in applications requiring high strength to approximately
E-BRITE E-BRITE. Technical Data Sheet. Stainless Steel: Superferritic GENERAL PROPERTIES PLANAR SOLID OXIDE FUEL CELLS CHEMICAL COMPOSITION
E-BRITE Stainless Steel: Superferritic (UNS 44627, ASTM Type XM-27) GENERAL PROPERTIES E-BRITE alloy is a high purity ferritic stainless steel which combines excellent resistance to corrosion and oxidation
Characteristics. Current carrying Capacity. Density 8.85 g/cm³. Thermal expansion coefficient C /K
Alloy Designation STOL 94 High Performance STOL Alloys EN CuNi2,5SiZn DIN CEN/TS 13388 UNS Chemical Composition percentage Cu # Rest % Ni 1... 4. % Si.8.. 1. % Zn max. 2. % Sn max. 1. % Ag max..5 % Mg
OHMALOY 30 and OHMALOY 40
OHMALOY 30 and OHMALOY 40 Resistance Alloys (UNS K91470 and K91670) INTRODUCTION Ohmaloy 30 and Ohmaloy 40 alloys are moderately magnetic, ductile stainless steels having extremely high electrical resistivity.
C22000 CuZn10 Industrial Rolled
Alloy Designation EN DIN CEN/TS 13388 JIS BS CW501L Brass Rolled Products UNS Chemical Composition percentage C22000 Cu 90 % Zn Rest % This alloy is in accordance with RoHS 2002/96/CE for electric & electronic
Nickel Based Superalloy Hastelloy B-3 (UNS N10675)
Nickel Based Superalloy Hastelloy B-3 (UNS N10675) Hastelloy B-3 is manufactured for providing excellent resistance to reducing acids at the different content %s and temperature limits. It shows better
Continuous Casting Mould Plates For Slab/ Bloom/ Beam Blank/ Vertical Casters
R Complete Competence in Copper Continuous Casting Mould Plates For / Bloom/ Beam Blank/ Vertical Casters Mould Plate Bloom Mould Plate Beam Blank Mould Plate Casting Bloom Casting Beam Blank Casting s
CuMg0,2 UNS:C18661 EN:CW127C. Rendering date: :43:20
Rendering date: 2018-12-04 03:43:20 http://conductivity-app.org CuMg0,2 UNS:C18661 EN:CW127C Manufactures list: La Farga (http://www.lfl.es) - CuMg0,2 Wires made of the copper-magnesium CuMg0,2 alloy belong
Hastelloy C-2000 (UNS N06200)
Hastelloy C-2000 (UNS N06200) Hastelloy C-2000 is a versatile alloy that provides high resistance to variety of chemicals including sulfuric acid, hydrochloric acid and other strong acidic media. It offers
Petrochemical and. Chemical Industry Processing. Applications Potential
15-5 PH STAINLESS STEEL P R O D U C T D ATA B U L L E T I N Aerospace Food Processing Paper Metalworking Petrochemical and Chemical Industry Processing Applications Potential 15-5 PH Stainless Steel offers
* Outside recommended Brinell hardness testing range (ASTM E 10)
Material Data The data information contained on this Web site is derived from many different sources. While Central Steel and Wire Company has taken all reasonable steps to ensure that all the information
INCOLOY alloy 803. Publication Number SMC-033 Copyright Special Metals Corporation, 2004 (Sept 04)
INCOLOY alloy 83 (UNS S3545), an iron-nickelchromium alloy, is designed for use in petrochemical, chemical and thermal processing applications. The nickel and chromium contents of alloy 83 are higher than
ATI 825 ATI 825. Technical Data Sheet. Nickel-base Alloy INTRODUCTION PRODUCT FORMS SPECIFICATIONS & CERTIFICATES (UNS N08825)
ATI 825 Nickel-base (UNS N08825) INTRODUCTION ATI 825 alloy (UNS N08825) is an austenitic nickel-iron-chromium-molybdenum-copper alloy containing high levels of chromium, nickel, molybdenum and copper
30ChGSA Included in 13 standards (CIS Countries)
Standards GOST 10702-78 GOST 11268-76 GOST 12132-66 GOST 21729-76 GOST 23270-89 GOST 4543-71 GOST 8731-74 GOST 8733-87 GOST R 54159-10 TU 14-1-1213-75 TU 14-1-1409-75 TU 14-1-4118-76 TU 14-4-385-73 Steel
SANDVIK NANOFLEX STRIP STEEL
SANDVIK NANOFLEX STRIP STEEL DATASHEET Sandvik Nanoflex is a precipitation hardening, austenitic stainless steel specifically designed for applications requiring high strength and good ductility. Mechanical
ATI 13-8 ATI Technical Data Sheet. Precipitation Hardening Alloy INTRODUCTION FORMS AND CONDITIONS. (UNS S13800, ASTM Type XM-13)
ATI 13-8 Precipitation Hardening Alloy (UNS S13800, ASTM Type XM-13) INTRODUCTION ATI 13-8 alloy (UNS S13800) is a martensitic precipitation-hardening stainless steel that has excellent strength, high
RA17-4 stainless. Introduction
RA17-4 stainless Introduction RA17-4 is an age-hardening martensitic alloy combining high strength with the corrosion resistance of stainless steel. Hardening is achieved by a short-time, simple lowtemperature
ATI 601 ATI 601. Technical Data Sheet. Nickel-base Alloy INTRODUCTION PRODUCT FORMS SPECIFICATIONS & CERTIFICATES (UNS N06601)
Nickel-base Alloy (UNS N06601) INTRODUCTION alloy (UNS Designation N06601) is an austenitic nickel-chromium-iron alloy designed for both heat and corrosion resistance. As compared to ATI 600 alloy (UNS
» UNS S41000» ASTM A276» ASTM A484» ASTM E381. » Hunting Rifles» Tactical Rifles» Competition Rifles» Pistol Barrels
COMPARABLE STANDARD Typical Analysis % C Si Mn P S Cr Ni Minimum 11.50 Maximum 0.15 0.60 1.00 0.040 0.03 12.50 0.75 DESCRIPTION Ugitech s 410RS is a pre-hardened chrome bearing martensitic stainless steel
2 Available from American National Standards Institute, 25 W. 43rd St., 4th. Floor, New York, NY
Designation: B 694 03 Standard Specification for Copper, Copper-Alloy, Copper-Clad Bronze (CCB), Copper- Clad Stainless Steel (CCS), and Copper-Clad Alloy Steel (CAS) Sheet and Strip for Electrical Cable
Material data sheet. EOS StainlessSteel 17-4 for EOSINT M 270. Description, application
EOS StainlessSteel 17-4 for EOSINT M 270 A number of different materials are available for use with EOSINT M systems, offering a broad range of e-manufacturing applications. EOS Stainless Steel 17-4 is
Material and Process. Specification
s 146-67- 1 of 7 Document By: Title Name 1. Purpose 1.1 This document defines approved revision levels of Material and Process specifications used by Onboard Systems. This list is for supplier reference
CHAPTER 5 WORKPIECE MATERIALS AND PARAMETERS FOR EXPERIMENT
71 CHAPTER 5 WORKPIECE MATERIALS AND PARAMETERS FOR EXPERIMENT 5.1 INTRODUCTION The workpiece materials for the experimental study are selected on the basis such that mathematical equations arrived at
METALES DE APORTACION, S.A.
METALES DE APORTACION, S.A. Carretera General s/n, 39792-Gajano (Cantabria) SPAIN BRAZING ALLOYS AND FLUXES Medasa, Metales de Aportación, S.A. - 2014 Electronic version to unload from www.medasa.com Introduction
Standard Specification for Precipitation-Hardening Stainless and Heat-Resisting Steel Plate, Sheet, and Strip 1
Designation: A 69 06 Standard Specification for Precipitation-Hardening Stainless and Heat-Resisting Steel Plate, Sheet, and Strip 1 This standard is issued under the fixed designation A 69; the number
ATI 332Mo. ATI 332Mo. Technical Data Sheet. Stainless Steel: Austenitic GENERAL PROPERTIES COMPOSITION PHYSICAL PROPERTIES (UNS S35125)
ATI 332Mo Stainless Steel: Austenitic (UNS S35125) GENERAL PROPERTIES ATI s ATI 332Mo alloy is an austenitic stainless steel intended primarily as an economical material for automotive flexible connectors.
These elements are in carbon steels in minimal amounts, usually less than 1%.
Alloy Steels Weld Tech News VOL 1. NO. 11 WELD TECH NEWS is a newsletter for welders working primarily in maintenance and repair. Each issue contains useful information on materials (cast irons, steels,
SPECIFICATION FOR STAINLESS STEEL BARS AND SHAPES
SPECIFICATION FOR STAINLESS STEEL BARS AND SHAPES A02 (Identical with ASTM Specification A 276-97.) 1. Scope 1.1 This specification covers hot-finished or coldfinished bars except bars for reforging (Note
Wire and Cable Heat-shrink Tubing Non-shrink Tubing Braided Sleeving Screening Braids Moulded Parts Terminals and Splices Wire and Cable Markers
Wire and Cable Heat-shrink Tubing Non-shrink Tubing Braided Sleeving Screening Braids Moulded Parts Terminals and Splices Wire and Cable Markers Accessories Connectors Backshells Bonding Leads Metal Braids
Ultimate Tensile Range (ksi min) Maximum Working Temp. 250 F 449/ /125 (class I) 250 F 425 F 325/ F 300/ F 242/ F 242/211
Properties Alloy Steel Music Wire ASTM A228 UNS K08500 & G10860 Cold drawn. Constant tensile strength. Highquality and good for high cycle spring 250 F 449/230 (E) 30 (G).012 to.250 High Carbon Steel Wire/Bar