IMPACT MODIFIER (21518XP) Maleic Anhydride (MAH) Grafted Polyolefin for Polyamide Applications
|
|
- Ferdinand Williamson
- 5 years ago
- Views:
Transcription
1 Technical Data Sheet PARALOID EXL-3815 IMPACT MODIFIER (21518XP) Maleic Anhydride (MAH) Grafted Polyolefin for Polyamide Applications Regional Availability Introduction Asia Pacific, Europe Very high-flow polyamide compounds are often desired on the market for a wide variety of injection-moulding applications, such as thin-walled components in the electrical, electronics and automotive areas. Higher flow also enables shorter injection moulding cycle times which is also key to improve productivity and costs, a constant quest in the industry. Rubbers, although required for improving mechanical properties such as impact strength, usually affect the melt viscosity in a negative fashion. A new generation impact modifier, PARALOID EXL-3815, has been developed by Dow Plastics Additives, and yields a much better retention of flow properties compared to standard modifiers. PARALOID EXL-3815 also takes the impact performance of polyamide compounds to the next level, enabling new applications unforeseen so far. Description PARALOID EXL-3815 Impact Modifier is a low crystallinity ethylene-octene copolymer functionalized with maleic anhydride (MAH) by reactive extrusion. PARALOID EXL-3815 displays excellent compatibility and bonding with polyamide matrices. It is highly versatile and provides excellent performance in PA6, 66 and glass-reinforced compositions. Its low Tg, below 50 C, ensures outstanding performance at low temperatures. Its fully saturated backbone results in good thermal and oxidative stability. Product Performance As can be seen from the graph below, PARALOID EXL-3815 Impact Modifier yields a higher melt flow in polyamide 6 compared to a standard modifier at equivalent addition level. A twofold improvement is observed at 20% loading. However, this improvement does not come at the expense of impact performance: PARALOID EXL-3815 offers significantly enhanced impact strength from low addition levels up to high loadings (e.g. 25%). RT (J/m) % 20% 25% 20% 15% 15% 10% 10% 5% 5% PARALOID Paraloid EXL-3815 EXL-3815 Standard modifier Neat PA6 Labels indicate modifier loading in wt% MVI (cc/10mn) C/5kg Page 1 of 6
2 Product Performance (cont d) A +24% flow length is also measured with a compound based on 20% PARALOID EXL-3815 Impact Modifier, when injection-moulded into a spiral mould, as shown by the pictures below, thus corroborating the improved behaviour observed in the melt index test. +24% flow length The graph below illustrates the performance profile for PARALOID EXL-3815, highlighting especially enhanced impact strength at sub-zero temperature and flow, compared to a standard modifier. MVI (cc/10min) Flexural Modulus (MPa) (J/m) Tensile Modulus (MPa) (J/m) 559 HDT ( C) Ci (kj/m²) Notched Charpy (kj/m 2 ) Standard Modifier PARALOID EXL Page 2 of 6
3 Product Performance (cont d) Glass-fiber reinforced polyamides are also crucially important on the market, and also there, a high flow becomes key for moulders. The following graph shows essentially improved flow and impact strength for a 10% addition level in a composition containing 30% short glass fibers. Flexural Modulus (MPa) MVI (cc/10min) (J/m) Elongation at break (%) 3,6 3, C(J/m) Tensile Modulus (MPa) HDT ( C) PA6/GF30 + Standard Modifier PA6/GF30 + PARALOID EXL Page 3 of 6
4 Product Performance (cont d) Being a highly versatile additive, PARALOID EXL-3815 also provides excellent performance in PA66, as can be seen from the graph below, with similar flow advantages than those provided in polyamide 6. PARALOID EXL-3815 gives a MFR of 21 g/10mn at 280 C/2,16kg versus 5 for the standard rubber used. RT ( J/m) % Loading PARALOID Paraloid EXL-3815 EXL-3815 Standard modifier Temperature ( C) Page 4 of 6
5 Regulatory Information Processing Information PARALOID EXL-3815 Impact Modifier is food contact approved according to European Directive on Food Packaging 2002/72/EC, and FDA regulations. PARALOID EXL-3815 Impact Modifier is supplied in a dust-free pellet form, easy to handle. It can be mixed with polyamide granules. PARALOID EXL-3815 is easily dispersed into polyamides by controlled addition of the additive during melt mixing in a twin screw extruder, using standard heating profile used for polyamide resins. Storage Handling Precautions Store products in tightly closed original containers at temperatures recommended on the product label. Before using this product, consult the Safety Data Sheet (SDS) for details on product hazards, recommended handling precautions and product storage. CAUTION! Keep combustible and/or flammable products and their vapors away from heat, sparks, flames and other sources of ignition including static discharge. Processing or operating at temperatures near or above product flashpoint may pose a fire hazard. Use appropriate grounding and bonding techniques to manage static discharge hazards. Disposal Considerations Dispose in accordance with all local, state (provincial) and federal regulations. Empty containers may contain hazardous residues. This material and its container must be disposed in a safe and legal manner. It is the user's responsibility to verify that treatment and disposal procedures comply with local, state (provincial) and federal regulations. Contact your Dow Plastics Additives Technical Representative for more information. Product Stewardship Dow has a fundamental concern for all who make, distribute, and use its products, and for the environment in which we live. This concern is the basis for our product stewardship philosophy by which we assess the safety, health, and environmental information on our products and then take appropriate steps to protect employee and public health and our environment. The success of our product stewardship program rests with each and every individual involved with Dow products from the initial concept and research, to manufacture, use, sale, disposal, and recycle of each product. Page 5 of 6
6 Medical Applications Policy NOTICE REGARDING MEDICAL APPLICATION RESTRICTIONS: Dow will not knowingly sell or sample any product or service ( Product ) into any commercial or developmental application that is intended for: long-term or permanent contact with internal body fluids or tissues. Long-term is contact which exceeds 72 continuous hours; use in cardiac prosthetic devices regardless of the length of time involved ( cardiac prosthetic devices include, but are not limited to, pacemaker leads and devices, artificial hearts, heart valves, intra-aortic balloons and control systems, and ventricular bypass-assisted devices); use as a critical component in medical devices that support or sustain human life; or use specifically by pregnant women or in applications designed specifically to promote or interfere with human reproduction. Dow requests that customers considering use of Dow products in medical applications notify Dow so that appropriate assessments may be conducted. Dow does not endorse or claim suitability of its products for specific medical applications. It is the responsibility of the medical device or pharmaceutical manufacturer to determine that the Dow product is safe, lawful, and technically suitable for the intended use. DOW MAKES NO WARRANTIES, EXPRESS OR IMPLIED, CONCERNING THE SUITABILITY OF ANY DOW PRODUCT FOR USE IN MEDICAL APPLICATIONS. Customer Notice Dow strongly encourages its customers to review both their manufacturing processes and their applications of Dow products from the standpoint of human health and environmental quality to ensure that Dow products are not used in ways for which they are not intended or tested. Dow personnel are available to answer your questions and to provide reasonable technical support. Dow product literature, including Safety Data Sheets, should be consulted prior to use of Dow products. Current Safety Data Sheets are available from Dow. Contact: North America: Latin America: (+55) Europe: (+800) (Toll) Asia-Pacific: (+800) (Toll) NOTICE: No freedom from infringement of any patent owned by Dow or others is to be inferred. Because use conditions and applicable laws may differ from one location to another and may change with time, Customer is responsible for determining whether products and the information in this document are appropriate for Customer's use and for ensuring that Customer's workplace and disposal practices are in compliance with applicable laws and other government enactments. The product shown in this literature may not be available for sale and/or available in all geographies where Dow is represented. The claims made may not have been approved for use in all countries. Dow assumes no obligation or liability for the information in this document. References to Dow or the Company mean the Dow legal entity selling the products to Customer unless otherwise expressly noted. NO WARRANTIES ARE GIVEN; ALL IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY EXCLUDED. Page 6 of 6
PARALOID EXL-2690 IMPACT MODIFIER
Technical Data Sheet EXL-269 IMPACT MODIFIER For Polycarbonate and Polycarbonate Blends Regional Availability Asia Pacific EMEA North America Description EXL-269 Impact Modifier is a methyl methacrylate-butadiene-styrene
More informationPARALOID EXL-2620 (Powder) MBS Impact Modifier For Polycarbonate, Polyesters and their Blends
Technical Data Sheet PARALOID EXL-2620 (Powder) MBS Impact Modifier For Polycarbonate, Polyesters and their Blends Regional Product Availability Description Excellent Dispersion Conversion Process Compounding
More informationPARALOID EXL-2655 Impact Modifier For Thermoset Applications
Technical Data Sheet PARALOID EXL-2655 Impact Modifier For Thermoset Applications Regional Product Availability Description Benefits Typical Properties Packaging Asia-Pacific PARALOID EXL-2655 Impact Modifier
More informationPARALOID EXL-5900 Optical Properties Modifier For Polycarbonate and Polystyrene
Technical Data Sheet PARALOID EXL-5900 Optical Properties Modifier For Polycarbonate and Polystyrene Regional Product Availability Description Physical Properties Processing Recommended Use Levels Light
More informationPARALOID TMS-2670 MBS Impact Modifier For Epoxy Resin Applications
PARALOID TMS-2670 MBS Impact Modifier For Epoxy Resin Applications Regional Product Availability North America Europe, Middle East and Africa Asia Pacific Description PARALOID TMS-2670 MBS Impact Modifier
More informationFlexible Acrylic Resin XP Translucent Grade
Technical Data Sheet Flexible Acrylic Resin 21309-XP Translucent Grade Regional Availability Description Applications Global Flexible Acrylic Resin 21309-XP is a thermoplastic flexible polymer composition
More informationPARALOID EXL 2314 Impact Modifier
Technical Data Sheet PARALOID EXL 2314 Impact Modifier Weatherable Impact Modifier For Engineering Resins Regional Product Availability Introduction North America Japan/Korea Asia Europe PARALOID EXL 2314
More informationSilane Crosslinking of Low Voltage Wire and Cable Applications of ENGAGE ENR / LLDPE Blend
Silane Crosslinking of Low Voltage Wire and Cable Applications of ENGAGE ENR 7256.00 / Blend ENGAGE Polyolefin Elastomers Introduction One process option of Silane crosslinking of a polyolefin involves
More informationAIRSTONE Mold Building System
Product Information AIRSTONE Mold Building System AIRSTONE 713H Hardener AIRSTONE 717H Hardener Description Applications Typical Properties Of System Components This AIRSTONE Mold Building System is comprised
More informationAVANSE ST-410 Acrylic Emulsion
Technical Data Sheet Environmentally-advanced Technology for Semitransparent Deck and Siding Stains For Industrial Coating Applications Regional Product Availability Description Features and Benefits of
More informationINFUSE Olefin Block Copolymers (OBCs) versus f-pvc
INFUSE Olefin Block Copolymers (OBCs) versus f-pvc Performance Differences, Benefits, and Potential Value Propositions Dow.com 1 Materials Tested Material Compound 65 Shore A Compound 45 Shore A 77 Shore
More informationPlumbShield. For use with Potable & Non-Potable Water Applications. Advantages. Standard Features
PlumbShield For use with Potable & Non-Potable Water Applications Streamline PlumbShield Coated Copper Tube comes coated with a layer of seamless polyethylene and is available in three different colors
More informationCase and Carton Sealing: Hot melt Adhesive Solutions
Case and Carton Sealing: Hot melt Adhesive Solutions STICK INGTO INNOV ATION Imagine what s next Hot Melt Adhesives for Case and Carton Sealing A vast range of businesses and individuals from global brand
More informationChemical Resistance of TRENCHCOAT Protective Film
Chemical Resistance of TRENCHCOAT Protective Film TRENCHCOAT Protective Film is an extremely durable film that can be laminated to galvanized steel for subsequent forming into corrugated steel pipe (CSP).
More informationINNOVATION DRIVING PERFORMANCE AND FOR ROTATIONAL MOLDING APPLICATIONS
INNOVATION DRIVING PERFORMANCE AND FOR ROTATIONAL MOLDING APPLICATIONS YOUR ONE-STOP SOURCE FOR ROTATIONAL MOLDING SOLUTIONS As more manufacturers embrace the exceptional combination of performance and
More informationD.E.R. 330 Liquid Epoxy Resin
Product Information D.E.R. 330 Liquid Epoxy Resin Description D.E.R. 330 Liquid Epoxy Resin is a reaction product of epichlorohydrin and bisphenol A. Introduction Typical Applications Typical Properties
More informationROPAQUE OP-96 All-Purpose Pigment Engineered to Improve Waterborne Coatings
Technical Data Sheet Engineered to Improve Waterborne Coatings Introduction is a non-film-forming synthetic pigment engineered to improve the economics of waterborne coatings. differs from its predecessor
More informationACUMER 9400 High-Performance Dispersant for Various Minerals
Technical Data Sheet ACUMER 9400 High-Performance Dispersant for Various Minerals Description ACUMER 9400 high-performance mining polymer is a polycarboxylate dispersant. ACUMER 9400 mining polymer allows
More informationRHOPLEX EP-6060 Acrylic Polymer For Factory-Applied Wood Coatings
Technical Data Sheet RHOPLEX EP-6060 Acrylic Polymer For Factory-Applied Wood Coatings Introduction Features Typical Physical Properties 1 RHOPLEX EP-6060 Acrylic Polymer is recommended for factory-applied
More informationInnovative material science for pipe applications from a global technology leader
Innovative material science for pipe applications from a global technology leader Plastic Pipe Plastics Global Plastics the right choice for pipe Reliable, efficient, and safe piping systems are essential
More informationimproved hot melt adhesives for hard-to-bond substrates
Dow Elastomers: Case Study Effective collaboration results in improved hot melt adhesives for hard-to-bond substrates A targeted approach to challenges facing hard-to-bond substrates leads to excellent
More informationINFUSE Olefin Block Copolymers (OBCs) versus SEBS and f-pvc Compounds
INFUSE Olefin Block Copolymers (OBCs) versus and s Performance Differences, Benefits, and Potential Value Propositions Dow.com 1 Materials Tested Material OBC 65 Shore A OBC 45 Shore A 7 Shore A 5 Shore
More informationROPAQUE Ultra E Opaque Polymer
Technical Data Sheet Ultra E Opaque Polymer For Formulation Cost Savings and Improved Coating Performance Regional Product Availability Description EMEA Ultra E is one of the most advanced polymeric opacifiers
More informationCIRCUPOSIT Neutralizer 3313 For PWB Metallization Applications
CIRCUPOSIT Neutralizer 3313 For PWB Metallization Applications Regional Product Availability Description N. American Asia CIRCUPOSIT Neutralizer 3313 has been developed as a replacement for the Sulfuric-Peroxide
More informationThe Material of Choice for Photovoltaic Encapsulant Films
ENGAGE PV Polyolefin Elastomers The Material of Choice for Photovoltaic Encapsulant Films Dow Elastomers The Power of ENGAGE PV POEs for Photovoltaic Encapsulant Films Encapsulant films made with ENGAGE
More informationThis product is suitable for use in applications such as: Civil Engineering Marine and Protective Coatings
Product Information D.E.R. 660-X80 Epoxy Resin Solution Description Introduction D.E.R. 660-X80 Epoxy Resin Solution is a semi-solid reaction product of epichlorohydrin and bisphenol A in a xylene solution.
More informationOne resin can t possibly focus on all of these diverse needs. Now, however, one family of polyethylene resins can.
CAPS, CLOSURES, AND FITMENTS REFRESHING SOLUTIONS FOR TAKE A TURN FOR THE BETTER WITH EVERCAP INNOVATIVE CLOSURE RESINS In a world with an astonishing range of packaged food, beverages, cleaners, and other
More informationPARALOID AU-608 TBZ Acrylic Polyol For Auto Refinishing, GIF and Conventional Spray Applications, and Airless Spray Maintenance
Technical Data Sheet Acrylic Polyol For Auto Refinishing, GIF and Conventional Spray Applications, and Airless Spray Maintenance Introduction Acrylic Polyol is supplied at 60% nonvolatiles in t-butyl acetate.
More informationD.E.H. 26 Epoxy Curing Agent
D.E.H. 26 Epoxy Curing Agent Description D.E.H. 26 Epoxy Curing Agent is a liquid aliphatic polyamine curing agent. Introduction D.E.H. 26 Curing Agent is an economical aliphatic polyamine hardener, tetraethylenepentamine
More informationSOLDERON SC Process. For Electronic Finishing Applications. Deposits meet or exceed Military Specification Method 202F, Method 208F.
Technical Data sheet SOLDERON SC Process For Electronic Finishing Applications REGIONAL PRODUCT AVAILABILITY DESCRIPTION N. America Japan/Korea Asia Europe SOLDERON SC is a low-foaming, organic sulfonate
More informationTAMOL 960 TAMOL 731A Scale Inhibitors
Technical Data Sheet TAMOL 960 TAMOL 731A Scale Inhibitors Description Features and Benefits Mechanism for Scale Inhibition In aqueous systems, such as boiler feed water and recirculated cooling water,
More informationRHOPLEX SG-10M 100% Acrylic Emulsion For Interior/Exterior Semigloss Latex Paints
Technical Data Sheet RHOPLEX SG-10M 100% Acrylic Emulsion For Interior/Exterior Semigloss Latex Paints Introduction RHOPLEX SG-10M Acrylic Emulsion is a versatile 100% copolymer that was designed for use
More informationACUMER 2200 High Performance Scale Inhibitor
Technical Data Sheet ACUMER 2200 High Performance Scale Inhibitor Description ACUMER 2200 is a highly effective scale inhibitor that can be used in industrial water treatment. ACUMER 2200 is a low molecular
More informationPREPOSIT Etch 748. For PWB Metallization Applications. For use in the CIRCUPOSIT 3000 Process. Bath Make-up Metric (for 100 liters)
Technical Data sheet PREPOSIT Etch 748 For PWB Metallization Applications REGIONAL PRODUCT AVAILABILITY DESCRIPTION N. America Japan/Korea Asia For use in the CIRCUPOSIT 3000 Process. PREPOSIT Etch 748
More informationDow Packaging and Specialty Plastics. Solutions for Extrusion Coating
Dow Packaging and Specialty Plastics Solutions for Extrusion Coating With more than 5 years of history in the extrusion coating and lamination marketplace, Dow Packaging & Specialty Plastics is committed
More informationA NEW GENERATION OF PERFORMANCE LDPE RESINS
A NEW GENERATION OF PERFORMANCE LDPE RESINS AGILITY PERFORMANCE LDPE MEET THE GROWING FAMILY AGILITY Resins constitute a new family of resins which is elevating the performance standards of the LDPE category
More informationAutomotive Thermosets Rev-up Performance, Design, and Efficiency
Automotive Thermosets Rev-up Performance, Design, and Efficiency Dow Elastomers Bumper to bumper, we ve got an elastomer for your automotive thermoset part Elastomers play a significant role in the auto
More informationACUMER 9300 Dispersant Polymer for Mineral Slurries
Technical Data Sheet ACUMER 9300 Dispersant Polymer for Mineral Slurries Typical Properties ACUMER 9300 Result Appearance Chemical nature Grade Average molecular weight Total solids (%) ~ 45 ph as is (@
More informationFASTRACK HD-21A Polymer Emulsion for Durable Waterborne Traffic Marking Paints
Technical Data Sheet HD-21A Polymer Emulsion for Durable Waterborne Traffic Marking Paints Regional Product Availability Description Advantages North America Latin America Europe Asia-Pacific HD-21A Emulsion
More informationPARALOID AU-1033 Acrylic Polyol with Low Isocyanate Demand For Coatings on Recreational Equipment and Fleet Refinishing
Technical Data Sheet PARALOID AU-1033 Acrylic Polyol with Low Isocyanate Demand For Coatings on Recreational Equipment and Fleet Refinishing Introduction Features and Benefits Typical Physical Properties
More informationRHOPLEX MULTILOBE 400 Emulsion Polymer
Technical Data Sheet MULTILOBE 400 Emulsion Polymer For Architectural Coating Applications, (APEO-Free, Low-VOC, Exterior Flat & Satin Paints) Regional Product Availability Description North America MULTILOBE
More informationOPTIDOSE 4210 Traceable Polymeric Acid Scale Inhibitor and Dispersant
Technical Data Sheet OPTIDOSE 4210 Traceable Polymeric Acid Scale Inhibitor and Dispersant Regional Product Availability Description Benefits North America OPTIDOSE 4210 traceable polymaleic acid polymer
More informationHow AFFINITY Polyolefin Plastomers Can Improve Cast Film Polypropylene Performance
How AFFINITY Polyolefin Plastomers Can Improve Cast Film Polypropylene Performance MARKET OVERVIEW To take advantage of the growing market for cast film polyproplyene (CPP), converters need products that
More informationPALLADURE 200 Pure Palladium Process
Technical Data sheet PALLADURE 200 Pure Palladium Process For Electronic Finishing Applications REGIONAL PRODUCT AVAILABILITY DESCRIPTION N. America Asia The PALLADURE TM 200 Process is characterized by
More informationThe perfect fit in stretch hood. Stretch Hood. Plastics North America. Resin Solutions
The perfect fit in stretch hood Stretch Hood Resin Solutions Plastics North America Whether you re wrapping a pallet of empty water bottles or two tons of cement bags, stretch hood technology offers the
More informationSILVERON TM GT-101 Bright Silver Cyanide-Free Bright Electrolytic Silver For Electronic, Decorative and Industrial Finishing Applications
Technical Data Sheet SILVERON TM GT-101 Bright Silver Cyanide-Free Bright Electrolytic Silver For Electronic, Decorative and Industrial Finishing Applications Regional Product Availability Description
More informationSUNNY-TOUGH. POE-g-MAH GRAFT POLYMERS FOR POLYAMIDE COMPOUNDS. Nantong Sunny Polymer New Material Technology Co., Ltd
SUNNY-TOUGH POE-g-MAH GRAFT POLYMERS FOR POLYAMIDE COMPOUNDS Nantong Sunny Polymer New Material Technology Co., Ltd What is SUNNY-TOUGH? SUNNY-TOUGH POE-g-MAH are Polyolefin Elastomers grafted Maleic Anhydride
More informationIngeo Biopolymer 3D860 Technical Data Sheet 3D Printing Monofilament High Heat and Impact Grade
3D Printing Monofilament High Heat and Impact Grade Monofilament Applications Ingeo 3D860 is a grade developed for manufacturing 3D printer monofilament. Engineered to deliver improved heatresistance and
More informationULDPE Copolymers ATTANE. Toughness and clarity to give your packaging the winning edge. Plastics North America
Toughness and clarity to give your packaging the winning edge ATTANE ULDPE Copolymers Plastics North America Table : Food and Specialty Packaging () Resin Melt Index, g/ min Density, g/cc Comonomer Wt.
More informationPalmaLite Resin 2 Liquid Epoxy Resin is a mono-functional reactive diluent modified liquid epoxy resin
Palma Inc. A Palma, Manton, Palma Company Safety Data Sheet Palma Inc. encourages and expects you lo read and understand the entire (M)SDS there is important information throughout the document. We expect
More informationAutoclave Sterilizable Biocompatible Ductile E-beam Sterilizable
Technical Data Sheet KetaSpire KT-880 KetaSpire KT-880 is a high flow grade of unreinforced (PEEK) supplied in pellet form. KetaSpire PEEK is produced to the highest industry standards and is characterized
More informationSURECEL 445 FOAM CELL PROMOTER
SURECEL 445 FOAM CELL PROMOTER For the European Region 1 SURECEL Foam Cell Promoters A next-generation processing aid for foamed PVC High molecular weight acrylic polymers: 1. Full acrylic monomers composition
More informationMAINCOTE 1100A Emulsion Advanced Resin for Industrial Coatings based on AVANSE Technology Platform
Technical Data Sheet MAINCOTE 1100A Emulsion Advanced Resin for Industrial Coatings based on AVANSE Technology Platform Regional Product Availability Description Key Features Benefits Asia-Pacific MAINCOTE
More informationUnderstanding FDA Food Packaging Regulations
White Paper Understanding FDA Food Packaging Regulations Extensive food contact regulations put in place by the U.S. Food and Drug Administration (FDA) are critical for ensuring the safety of food that
More informationPARALOID AE-1285 Acrylic Curing Agent For Isocyanate-Free, High-Solids, Durable Topcoats
Technical Data Sheet PARALOID AE185 Acrylic Curing Agent For IsocyanateFree, HighSolids, Durable Topcoats Introduction PARALOID AE185 Acrylic Curing Agent is a high solids acrylic resin that can be formulated
More informationOPTIDOSE 1000 Traceable Polymer A Tool for Maintaining Maximum Heat Transfer
Technical Data Sheet OPTIDOSE 1000 Traceable Polymer A Tool for Maintaining Maximum Heat Transfer Description OPTIDOSE traceable polymer technology is a revolutionary method of tracking polymer levels
More informationOUDRASperse WB 3001 Waterborne Epoxy Dispersion
Technical Data Sheet OUDRASperse WB 3001 Waterborne Epoxy Dispersion Description OUDRASperse WB 3001 is a waterborne dispersion of a liquid epoxy resin, being manufactured without added solvent. It is
More informationDuPont Zytel HTN51G50HSL BK083 (Preliminary Data)
PRODUCT INFORMATION DuPont Zytel HTN51G50HSL K083 (Preliminary Product Information Zytel HTN high performance polyamide resins feature high retention of properties upon exposure to elevated temperature,
More informationD.E.R. 684-EK40 Epoxy Resin Solution
Product Information D.E.R. 684-EK40 Epoxy Resin Solution Description Introduction D.E.R. 684-EK40 Epoxy Resin Solution is an ultra high molecular weight solid reaction product of epichlorohydrin and bisphenol
More informationCommercial: Active Africa & Middle East Asia Pacific Glass Fiber, 50% Filler by Weight Flame Retardant. Physical Typical Value Unit Test method
Technical Data Sheet Ixef 1521 Ixef 1521 is a 50% glass-fiber reinforced, flame retardant which exhibits high strength and stiffness, outstanding surface gloss, and excellent creep resistance. Custom Colorable
More informationDOWANOL(TM) PMA Glycol Ether
Regulatory Data Sheet DOWANOL(TM) PMA Glycol Ether OxySolvRDS_DOWANOLTM PMA Glycol Ether _RDS_00165751 Chemical Inventory Compliance This product complies with, or is listed on several Global Inventories
More informationTotal Solutions. for Extrusion Coating & Laminating
Total Solutions for Extrusion Coating & Laminating With more than 60 years of history in the extrusion coating & laminating (EC&L) marketplace, Dow Packaging & Specialty Plastics is committed to providing
More informationTECHNYL A 218 V30 BLACK 34NG
TECHNICAL DATA SHEET TECHNYL A 218 V30 Black 34 NG is a polyamide 66, reinforced with 30% of glass fiber, heat stabilized, for injection moulding. This grade has been specially designed to improve its
More informationCommercial: Active Africa & Middle East Asia Pacific. RoHS Compliant Beige Pellets Extrusion Blow Molding Fiber (Spinning) Extrusion Film Extrusion
Technical Data Sheet AvaSpire AV-621 is an unreinforced (PAEK) that offers improved ductility and impact strength relative to PEEK while retaining most of the key performance attributes of PEEK. The AV-621
More informationCommercial: Active Africa & Middle East Asia Pacific. RoHS Compliant Beige Pellets Extrusion Blow Molding Fiber (Spinning) Extrusion Film Extrusion
Technical Data Sheet AvaSpire AV-621 is an unreinforced (PAEK) that offers improved ductility and impact strength relative to PEEK while retaining most of the key performance attributes of PEEK. The AV-621
More informationDuPont Zytel 73G45 BK263
Product Information PRODUCT INFORMATION Common features of Zytel nylon resin include mechanical and physical properties such as high mechanical strength, excellent balance of stiffness and toughness, good
More informationAutomotive: Applications, Processes and products -- Fiberglass for PA Reinforcement. Dr. Heinz Zhang. Product R&D Center
Automotive: Applications, Processes and products -- Fiberglass for PA Reinforcement Dr. Heinz Zhang Product R&D Center Overview 1 Fiberglass Reinforced Thermoplastic Composites 2 PA & Fiberglass Reinforced
More informationDow Corning HMB-1103 Masterbatch
Product Information Plastics Dow Corning HMB-1103 Masterbatch FEATURES & BENEFITS When used in polar engineered plastics such as PA and POM, Dow Corning HMB-1103 Masterbatch demonstrates the benefits below
More informationCapstan drive units Mechanical handling rollers
PRODUCT INFORMATION PROVISIONAL TECHNICAL DATASHEET 8/6/2013 Introduction MONOTHANE is a range of single component, ready formulated polyesterbased polyurethane elastomers, available in the hardness range
More informationAURALL 305M Electrolytic Gold For Electronic Finishing Applications
Technical Data Sheet AURALL 305M Electrolytic Gold For Electronic Finishing Applications Regional Product Availability Description Advantages North America AURALL 305M Electrolytic Gold produces semibright,
More informationDOW Specialty Membrane XUS and XUS Reverse Osmosis Elements
Product Data Sheet DOW Specialty Membrane XUS120308 and XUS120304 Reverse Osmosis Elements Description The DOW XUS120308 and XUS120304 High Temperature Reverse Osmosis Elements offer a distinct combination
More informationMaterial Properties of Injection Molded Glass and Carbon Fiber Reinforced Thermoplastic Composites A Review
Material Properties of Injection Molded Glass and Carbon Fiber Reinforced Thermoplastic Composites A Review SPE Automotive Composites Conference & Exhibition, Sept. 7-9 216 Mark Cieslinski, BASF - Advanced
More informationRHOPLEX WL-96 Waterborne Acrylic Polymer For Low VOC Interior Clear Wood Finishes
Technical Data Sheet RHOPLEX WL-96 Waterborne Acrylic Polymer For Low VOC Interior Clear Wood Finishes Introduction RHOPLEX WL-96 Waterborne Acrylic Polymer is a binder that can be used for low-voc, brush-applied,
More informationPARALOID Edge 2301 Resin
Technical Data Sheet PARALID Edge 2301 Resin Solvent Borne Acrylic Carbamate Resin for Industrial Coatings Description Features and Benefits PARALID Edge 2301 Resin is a solvent borne, acrylic carbamate
More informationShort Form Guide Specification. STYROFOAM CAVITYMATE Ultra Air Barrier Wall System
Short Form Guide Specification STYROFOAM CAVITYMATE Ultra Air Barrier Wall System November 2011 DISCLAIMER: The manufacturer has reviewed the product information contained in this short form specification.
More informationDOWANOL(TM) PM Glycol Ether
Regulatory Data Sheet DOWANOL(TM) PM Glycol Ether OxySolvRDS_DOWANOLTM PM Glycol Ether _RDS_00022473 Chemical Inventory Compliance This product complies with, or is listed on several Global Inventories
More informationTECHNYL A 218 V35 BLACK 21N
TECHNICAL DATA SHEET TECHNYL A 218 V35 Black 21N is a polyamide 66, reinforced with 35% of glass fibre, heat stabilized, for injection moulding. This grade offers an excellent combination between thermal
More informationCommercial: Active Africa & Middle East Asia Pacific
Technical Data Sheet AvaSpire AV-651 is an unreinforced (PAEK) that offers more ductility and impact strength than PEEK, with higher chemical and environmental stress cracking resistance than AvaSpire
More informationDow Specialty Elastomers for Thermoplastic Polyolefins
White Paper Dow Specialty Elastomers for Thermoplastic Polyolefins Updated: August, 2013 Author: Jim Hemphill, Senior R&D Manager, Dow Elastomers, The Dow Chemical Company Dow Elastomers Dow Specialty
More informationPRIMAL SF-208ER Binder
Technical Data Sheet PRIMAL SF-208ER Binder Based on Formashield Technology For Functional Interior Wall Paints Regional availability Product Description EMEA PRIMAL SF-208ER is an aqueous, styrene-acrylic
More informationDOW CORNING MB Masterbatch
Product Information DOW CORNING MB50 001 Masterbatch FEATURES Imparts processing improvements and modified surface characteristics BENEFITS Improved throughput Reduced energy consumption Enhanced scratch
More informationDuPont Zytel 73G30L NC010
Product Information PRODUCT INFORMATION Common features of Zytel nylon resin include mechanical and physical properties such as high mechanical strength, excellent balance of stiffness and toughness, good
More informationKetaSpire KT-820 GF30
Technical Data polyetheretherketone KetaSpire KT-820 GF30 is a medium flow, 30% glass fiber reinforced grade of polyetheretherketone (PEEK). This resin offers higher strength and stiffness properties relative
More informationPhysical Dry Conditioned Unit Test method
Technical Data Sheet Ixef 1022 is a 50% glass-fiber reinforced, general purpose compound that exhibits very high strength and rigidity, outstanding surface gloss, and excellent creep resistance. General
More informationFR Division FR-1410
FR-1410 Decabromodiphenyl ethane Application Data Sheet for Polyamide 6,6 (Nylon 6,6) FR-1410 is offered by ICL-IP as a flame retardant additive containing 82% aromatic bromine. Its high bromine content
More informationROVACE 9400 Vinyl Acrylic Binder
Technical Data Sheet ROVACE 9400 Vinyl Acrylic Binder Architectural Binder for Semi-Film Forming Matt to Satin Wall Paints Regional Product Availability Product Description Features Europe ROVACE 9400
More informationDuPont Zytel 70G33HS1L BK031
Product Information PRODUCT INFORMATION Common features of Zytel nylon resin include mechanical and physical properties such as high mechanical strength, excellent balance of stiffness and toughness, good
More informationDuPont Zytel 70G33L NC010
Product Information PRODUCT INFORMATION Common features of Zytel nylon resin include mechanical and physical properties such as high mechanical strength, excellent balance of stiffness and toughness, good
More informationAmodel AS-1133 HS. polyphthalamide. Technical Data Sheet
Technical Data Sheet Amodel AS-1133 HS Amodel AS-1133 HS is a 33% glass reinforced, heat stabilized (PPA) resin that provides excellent structural integrity in molded parts, even those with wall thicknesses
More informationRHOPLEX MV-23LO Emulsion Copolymer For Wood Primers and Stain Blocking Sealers
Technical Data Sheet RHOPLEX MV-23LO Emulsion Copolymer For Wood Primers and Stain Blocking Sealers Introduction Benefits Exterior Performance Typical Physical Properties 1 RHOPLEX MV-23LO Emulsion Copolymer
More informationRoHS Compliant Beige Pellets Extrusion Blow Molding Fiber (Spinning) Extrusion Film Extrusion
Technical Data polyaryletherketone AvaSpire AV-621 is an unreinforced polyaryletherketone (PAEK) that offers improved ductility and impact strength relative to PEEK while retaining most of the key performance
More informationUCARSOL AP 804 and AP 806 Solvents
Technical Information UCARSOL AP 804 and AP 806 Solvents For Bulk CO 2 Removal Introduction UCARSOL AP 804 and UCARSOL AP 806 Solvents are two additions to a series of advancedperformance gas treating
More informationDuPont Zytel 73G15HSL BK363
Product Information PRODUCT INFORMATION Common features of Zytel nylon resin include mechanical and physical properties such as high mechanical strength, excellent balance of stiffness and toughness, good
More informationTemperature stability of anion exchange resins
Temperature stability of anion exchange resins Introduction Main types of anion exchange resins The functional groups of anion exchange resins are only moderately stable and undergo degradation at high
More informationDuPont Delrin 100ST NC010
Product Information PRODUCT INFORMATION Common features of Delrin acetal resins include mechanical and physical properties such as high mechanical strength and rigidity, excellent fatigue and impact resistance,
More informationProduct Information Plastics Dow Corning MB Masterbatch
Product Information Plastics Dow Corning MB50-001 Masterbatch FEATURES & BENEFITS Imparts processing improvements and modified surface characteristics Improved throughput Reduced energy consumption Enhanced
More informationTECHNYL A 205F. Key Properties. Description. Benefits. Applications. Product Data Sheet. Regional Availability
TECHNYL A 205F Description TECHNYL A 205F is an unreinforced polyamide 66 for injection moulding. It is available in natural color. Key Properties General purpose Fast cycle High fluidity Benefits The
More informationTECHNYL A 218W V30 BLACK FA
TECHNICAL DATA SHEET TECHNYL A 218W V30 Black FA is a polyamide 66, reinforced with 30% of glass fibre, heat stabilized, for injection moulding. This grade offers an improved hydrolisis resistance, as
More informationPARALOID K-120ND Processing Aid for Vinyl Compounds
PARALOID K-120ND Processing Aid for Vinyl Compounds Description PARALOID K-120ND processing aid is a readily dispersible acrylic powder that improves the processing of rigid and flexible Vinyl. Compounds
More informationDuPont Rynite 530 NC010
PRODUCT INFORMATION Product Information Common features of Rynite thermoplastic polyester include mechanical and physical properties such as excellent balance of strength and stiffness, dimensional stability,
More information