High Temperature Component Life Assessment
|
|
- Rosalind Simon
- 5 years ago
- Views:
Transcription
1 High Temperature Component Life Assessment
2 High Temperature Component Life Assessment G.A. Webster Professor of Engineering Materials Department of Mechanical Engineering Imperial College of Science, Technology and Medicine London, UK and R.A. Ainsworth Nuclear Electric pic Berkeley Technology Centre Springer-Science+Business Media, B.Y.
3 First edition Springer Science+Business Media Dordrecht Originally published by Chapman & Hali in 1994 Typeset in 10/12 pt. Palatino by Thomson Press (India) Ud., New Delhi ISBN ISBN (ebook) DOI / Aparl from any fair dealing for the purposes of research or private study, or criticism or review, as permitted under the UK Copyright Designs and Patents Act, 1988, this publication may not be reproduced, stored, or transmitted, in any form or by any means, without the prior permission in writing of the publishers, or in the case of reprographic reproduction only in accordance with the terms of the licences issued by the Copyright Licensing Agency in the UK, or in accordance with the terms of licences issued by the appropriate Reproduction Rights Organization outside the UK. Enquiries conceming reproduction outside the terms stated here should be sent to the publishers at the London address printed on this page. The publisher makes no representation, express or implied, with regard to the accuracy of the information contained in this book and cannot accept any legal responsibility or liability for any errors or omissions that may be made. A catalogue record for this book is available from the British Library Library of Congress Catalog Card Number r Printed on permanent acid-free text paper, manufactured in accordance with ANSIINISO Z and ANSI/NISO Z (Permanence of paper).
4 Dedication We are indebted to our wives, Sheila and Gina, without whose patience, encouragement and dired help this book might never have been completed. We, therefore, gratefully dedicate the book to them.
5 Contents Preface Introduction Outline 1.2 Improvements in plant utilization and efficiencies 1.3 High temperature design procedures 1.4 Residual life assessment 1.5 Aims of the book Processes of deformation and fracture at high temperatures Nature of creep Stress and temperature dependence of secondary creep Time dependence of creep Characterization of fracture 2.5 Time-temperature creep parameters 2.6 Creep under variable stress and temperature 2.7 Complex stress creep 2.8 Damage mechanics concepts 2.9 Fatigue effects 2.10 Summary 3 Stress analysis of uncracked bodies 3.1 Creep bending theory 3.2 Axisymmetric creep stress analysis 3.3 Energy methods 3.4 Reference stress concepts 3.5 Failure due to creep damage propagation 3.6 Summary xi Stress analysis of cracked bodies Linear elastic fracture mechanics concepts 79 79
6 viii Contents Small-scale yielding Elastic-plastic fracture mechanics concepts Creep fracture mechanics concepts Influence of stress redistribution 4.6 Summary Appendix A4 Some fracture mechanics solutions Models for creep crack initiation and growth General observations Characterizations of creep crack growth Mechanism of creep crack growth Steady state creep crack growth models Models of incubation period Transient analysis of 'tails' Crack propagation into damaged material Residual life assessment Relationship between fracture by crack growth and continuum damage Summary Creep-fatigue crack growth Introduction Types of loading cycle Fatigue crack growth Elevated temperature cyclic crack growth Prediction of creep-fatigue crack growth Modelling of displacement controlled cyclic crack growth Summary Experimental determinations of high temperature crack growth Specimen geometry and testing arrangement Methods of measuring crack extension Measurements of deflection Analysis of data to obtain C Presentation of crack growth rate data Presentation of crack incubation data Validity criteria Creep-fatigue crack growth data Testing of service exposed material Summary 265
7 Contents ix 8 Practical applications 8.1 Procedure 8.2 Material properties 8.3 Defect assessment 8.4 Worked examples 8.5 Summary Index
8 Preface There is a trend towards the progressive use of higher operating temperatures and stresses to achieve improved efficiencies in, for example, electric power generation equipment, gas turbines and chemical reactors. This trend is resulting in an increased need for more reliable lifetime prediction methods for components subjected to creep and fatigue loading. Traditionally, the design of equipment for operation at elevated temperatures has been based on the assumption that it is' defect free. However, frequently engineering components have to undergo periodic mandatory inspections to assess their suitability for further use. If cracks are detected, some procedure is required for determining whether the cracks are acceptable, or whether they constitute a risk to safety and must be repaired or the plant taken out of service. The increased sensitivity of crack monitoring equipment is causing smaller and smaller cracks to be detected. In addition, hypothetical defects often have to be assumed present where inspection is not possible. Consequently defect assessment calculations have to be made more frequently than in the past. It is important that these calculations are realistic because serious economic penalties could be incurred if the plant is taken out of service unnecessarily or a disastrous failure takes place. Recently, rapid advances have been made in characterizing high temperature crack growth behaviour. The main concern of this book is with explaining these developments. Initially some industrial applications are considered to set the scene. The fundamentals of creep deformation and fracture are described and used as a basis for developing relevant stress analysis principles for uncracked bodies. Fracture mechanics and limit analysis methods are then introduced for dealing with cracks. Models for the initiation and propagation of cracks under static and cyclic loading are discussed and procedures developed for identifying the mechanisms controlling failure. Recommendations are included for obtaining reliable high temperature crack growth data experimentally. Finally some practical applications are considered to indicate how lifetime predictions can be made. Throughout the book, complicated mathematics has been minimized and emphasis placed on identifying fundamental principles and showing how these can be applied, in conjunction with simplified procedures, to obtain solutions to real problems without the use of extensive numerical analysis. The treatment is intended to be suitable for practising engineers, metallurgists, materials scientists and research workers who are involved in the design and operation or maintenance of equipment which operates at high temperatures.
9 xii Preface Most of the research and developments on which the book is based were carried out at Imperial College and within the former Central Electricity Generating Board. The authors acknowledge the considerable contributions of a succession of research students and their colleagues. They hope that readers will find the book stimulating and useful. August 1993 G.A. Webster R.A. Ainsworth
High Performance Materials in Aerospace
High Performance Materials in Aerospace High Performance Materials in Aerospace Edited by Harvey M. Flower Professor of Materials Science Imperial College of Science, Technology and Medicine London, UK
More informationStructural Health Monitoring Using Genetic Fuzzy Systems
Structural Health Monitoring Using Genetic Fuzzy Systems Prashant M. Pawar Ranjan Ganguli Structural Health Monitoring Using Genetic Fuzzy Systems Prashant M. Pawar College of Engineering Shri Vithal Education
More informationFibre Science and Technology
Fibre Science and Technology Soviet Advanced Composites Technology Series Series editors: J. N. Fridlyander, Russian Academy of Sciences, Moscow, Russia I. H. Marshall, University of Paisley, Paisley,
More informationQuality Costing. Barrie G. Dale Senior Lecturer and Director UMISI Quality Management Centre Manchester. and
Quality Costing Quality Costing Barrie G. Dale Senior Lecturer and Director UMISI Quality Management Centre Manchester and James J. Plunkett Late Iotal Quality Management Project Officer UMISI Quality
More informationPolymer Composites for Civil and Structural Engineering
Polymer Composites for Civil and Structural Engineering Polymer Composites for Civil and Structural Engineering by L. HOLLAWAY Professor Composite Structures Research Unit Department of Civil Engineering
More informationQuality Assurance Management
Quality Assurance Management Michael J. Fox Associate Consultant University of Paisley Quality Centre Associate Tutor Durham University Business School SPRINGER-SCIENCE+BUSINESS MEDIA, B.V. First edition
More informationQuality Auditing. David Mills MIQA SPRINGER-SCIENCE+BUSINESS MEDIA, B.V.
Quality Auditing Quality Auditing David Mills MIQA SPRINGER-SCIENCE+BUSINESS MEDIA, B.V. First edition 1993 1993 Springer Science+Business Media Dordrecht Origina1ly published by Chapman & Hali in 1993
More informationPolymer Matrix Composites
Polymer Matrix Composites Soviet Advanced Composites Technology Series Series editors: J. N. Fridlyander, Russian Academy of Sciences,, Russia 1. H. Marshall, University of Paisley, Paisley, UK This series
More informationTerrestrial Slugs. I ~! Springer-Science+Business ' I. A. South. Biology, ecology and control
Terrestrial Slugs Terrestrial Slugs Biology, ecology and control A. South formerly Department of Biological Sciences City of London Polytechnic I ~! Springer-Science+Business ' I Media, B.v. First edition
More informationoviet dvanced Composites echnology eries EDITED BY A. G. Bratukhin and V. S. Bogolyubov SERIES EDITORS J. N. Fridlyander and I. H.
oviet dvanced Composites echnology eries SERIES EDITORS J. N. Fridlyander and I. H. Marshall T E C H N O L O G Y EDITED BY A. G. Bratukhin and V. S. Bogolyubov Composite Manufacturing Technology Soviet
More informationFATIGUE AS A DESIGN CRITERION
FATIGUE AS A DESIGN CRITERION FATIGUE AS A DESIGN CRITERION Terance V. Duggan and James Byrne Department of Mechanical Engineering and Naval Architecture, Portsmouth Polytechnic Terance V. Duggan and James
More informationStrength- Based Leadership Coaching in Organizations
Strength- Based Leadership Coaching in Organizations An evidencebased guide to positive leadership development Doug MacKie Kogan Page Publisher s note Every possible effort has been made to ensure that
More informationLow density cellular plastics
Low density cellular plastics Low density cellular plastics Physical basis of behaviour Edited by N. C. Hilyard Honorary Research Fellow, Materials Research Institute, Division of Applied Physics, Sheffield
More informationWork Life 2000 Yearbook 3
Work Life 2000 Yearbook 3 Springer-Verlag London Ltd. Work Life 2000 Yearbook 3 2001 The third of a series of Yearbooks in the Work Life 2000 programme, preparing for the Work Life 2000 Conference in MaImö
More informationManagement Accounting
Management Accounting MANAGEMENT ACCOUNTING A Review of Contemporary Developments Second Edition Robert W. Sea pens ~ MACMILLAN Robert W. Scapens 1985, 1991 All rights reserved. No reproduction, copy or
More informationEnvironmental Soil Biology
Environmental Soil Biology Tertiary Level Biology A series covering selected areas of biology at advanced undergraduate level. While designed specifically for course options at this level within Universities
More informationAgile Software Construction
Agile Software Construction John Hunt Agile Software Construction John Hunt, BSc, PhD, MBCS, CEng, MEng Experis Ltd. Chippenham Wiltshire UK British Library Cataloguing in Publication Data A catalogue
More informationAn Introduction to the Engineering of Fast Nuclear Reactors
An Introduction to the Engineering of Fast Nuclear Reactors This book is a resource for both graduate-level engineering students and practicing nuclear engineers who want to expand their knowledge of fast
More informationElemen tary engineering fracture mechanics
Elemen tary engineering fracture mechanics Elementary engineering fracture mechanics DAVID BROEK 1982 MARTINUS NIJHOFF PUBLISHERS THE HAGUE/BOSTON/LONDON Distributors: for the United States and Canada
More informationCombustion and Pollution Control in Heating Systems
Combustion and Pollution Control in Heating Systems v. I. Hanby Combustion and Pollution Control in Heating Systems With 44 Figures Springer-Verlag London Berlin Heidelberg New York Paris Tokyo Hong Kong
More informationHydrogen-based Autonomous Power Systems
Power Systems Emmanuel I. Zoulias with N. Lymberopoulos Hydrogen-based Autonomous Power Systems Techno-economic Analysis of the Integration of Hydrogen in Autonomous Power Systems 123 Emmanuel I. Zoulias,
More informationFundamental Structural Analysis
Fundamental Structural Analysis By the same author Microcomputer Applications in Structural Engineering (with W. H. Mosley) Other Macmillan titles of related interest An Introduction to Engineering Fluid
More informationPROCESSING OF POULTRY
PROCESSING OF POULTRY PROCESSING OF POULTRY Edited by G. c. MEAD AFRC Institute of Food Research, Bristol Laboratory, Langford, Bristol, UK SPRINGER-SCIENCE+BUSINESS MEDIA, B.V. First edition 1 989 Reprinted
More informationStructural Masonry. Arnold W. Hendry BSc, PhD, DSc, FleE
STRUCTURAL MASONRY Other titles of interest to Civil Engineers An Introduction to Engineering Fluid Mechanics J. A. Fox Polymer Materials: An Introduction for Technologists and Scientists Christopher Hall
More informationUndergraduate Topics in Computer Science
Undergraduate Topics in Computer Science Undergraduate Topics in Computer Science (UTiCS) delivers high-quality instructional content for undergraduates studying in all areas of computing and information
More informationTelford Learning Centre University of Wolverhampton Priorslee Telford TF2 9NT Wolverhampton (01902)
05/07 ~ WOlVERHAMPTON Telford Learning Centre University of Wolverhampton Priorslee Telford TF2 9NT Wolverhampton (01902) 323983 Telephone Renewals: 01902 321333 or 0845 408 1631 Please RETURN this item
More informationAlso by Mike Rosser. Women and the Economy: A Comparative Study of Britain and the USA (with A. T. Mallier)
MICROECONOMICS Also by Mike Rosser Women and the Economy: A Comparative Study of Britain and the USA (with A. T. Mallier) MICROECONOMICS THE FIRM AND THE MARKET ECONOMY Mike Rosser Principal Lecturer,
More informationEngineering Plasticity
Engineering Plasticity Engineering Plasticity Theory and Application to Metal Forming Processes R. A. C. Slater Department of Mechanical Engineering The City University, London M R. A. C. Slater 1977 Softcover
More informationRECENT ADVANCES IN STRUCTURAL JOINTS AND REPAIRS FOR COMPOSITE MATERIALS
RECENT ADVANCES IN STRUCTURAL JOINTS AND REPAIRS FOR COMPOSITE MATERIALS Recent Advances in Structural Joints and Repairs for Composite Materials Edited by LIYONGTONG School of Aerospace, Mechanical and
More informationCONTROL CHARTS J. MURDOCH. Head of Statistics and Operational Research Unit, Cranfield Institute of Technology, Bedford
CONTROL CHARTS CONTROL CHARTS J. MURDOCH Head of Statistics and Operational Research Unit, Cranfield Institute of Technology, Bedford M J. Murdoch 1979 All rights reserved. No part of this publication
More informationEXPLAINING AND FORECASTING THE US FEDERAL FUNDS RATE
EXPLAINING AND FORECASTING THE US FEDERAL FUNDS RATE This page intentionally left blank Explaining and Forecasting the US Federal Funds Rate A Monetary Policy Model for the US MATTHEW CLEMENTS Matthew
More informationBrewing Microbiology
Brewing Microbiology Brewing Microbiology Second edition Edited by F.G. Priest and I. Campbell International Centre for Brewing and Distilling Heriot-Watt University Edinburgh, UK Springer-Science+Business
More informationManagement Finance Measurement
Construction 1 Management Finance Measurement A.V. Hore, I.G. Kehoe, R. McMullan and M.R. Penton palgrave macmillan A.V. Hore, J.G. Kehoe, R. McMullan and M.R. Penton 1997 All rights reserved. No reproduction,
More informationMACHINABILITY OF ENGINEERING MATERIALS
MACHINABILITY OF ENGINEERING MATERIALS Machinability of Engineering Materials B. MILLS B.SC., M.Sc., Ph.D., C.Eng., F.LM., M.Inst.P. and A. H. REDFORD B.Sc., Ph.D., A.R.T.C.S. Department of Aeronautical
More informationSIXTH EDITION MATERIALS FOR ENGINEERS AND TECHNICIANS W. BOLTON & R. A. HIGGINS
SIXTH EDITION MATERIALS FOR ENGINEERS AND TECHNICIANS W. BOLTON & R. A. HIGGINS Materials for Engineers and Technicians A comprehensive yet accessible introduction to materials engineering which provides
More informationREINFORCED CONCRETE DESIGN
REINFORCED CONCRETE DESIGN Other Macmillan titles of related interest Microcomputer Applications in Structural Engineering W. H. Mosley and W. J. Spencer Reinforced Concrete Design by Computer R. Hulse
More informationB. INTRODUCTION TO ASSESSMENT PROCEDURES FOR CRACKED COMPONENTS AT HIGH TEMPERATURES
B. INTRODUCTION TO ASSESSMENT PROCEDURES FOR CRACKED COMPONENTS AT HIGH TEMPERATURES 374 INTRODUCTION The early approaches to high temperature life assessment show methodologies that were based on defect-free
More informationFundamental Structural Analysis
Fundamental Structural Analysis w. J. Spencer Fundamental Structural Analysis Springer Science+Business Media, LLC W. J. Spencer 1988 Originally published by Springer-Verlag New York Inc. in 1998 Softcover
More informationTree and Forest Measurement
Tree and Forest Measurement P.W. West Tree and Forest Measurement 2 nd Edition With 33 Figures and 11 Tables P.W. West School of Environmental Science and Management Southern Cross University Lismore,
More informationFinancial Accounting, Reporting and Analysis
027370253X_COVER 18/10/05 10:40 AM Page 1 The fully updated International Edition of Elliott and Elliott s market-leading Financial Accounting and Reporting uses the latest International Accounting Standards
More informationX-Ray Diffraction. A Practical Approach
X-Ray Diffraction A Practical Approach X-Ray Diffraction A Practical Approach c. Suryanarayana Colorado School of Mines Golden, Colorado and M. Grant Norton Washington State University Pullman, Washington
More informationMANUAL ON LOW CYCLE FATIGUE TESTING
MANUAL ON LOW CYCLE FATIGUE TESTING ASTM SPECIAL TECHNICAL PUBLICATION 465 List price $12.50 AMERICAN SOCIETY FOR TESTING AND MATERIALS 1916 Race Street, Philadelphia, Pa. 19103 9 BY AMERICAN SOCIETY FOR
More informationMetallurgical and Ceramic Protective Coatings
Metallurgical and Ceramic Protective Coatings Metallurgical and Ceramic Protective Coatings Edited by Chemistry Division Naval Research Laboratory Washington D.C. lun! CHAPMAN & HALL London Weinheim. New
More informationBUSINESS CONTINUITY MANAGEMENT SYSTEM A COMPLETE GUIDE TO IMPLEMENTING ISO 22301
BUSINESS CONTINUITY MANAGEMENT SYSTEM A COMPLETE GUIDE TO IMPLEMENTING ISO 22301 WEI NING ZECHARIAH WONG & JIANPING SHI Business Continuity Management System Business Continuity Management System A Complete
More informationCRACK GROWTH AT STRUCTURAL DISCONTINUITIES AND WELDS
CREEP AND CREEP-FATIGUE CRACK GROWTH AT STRUCTURAL DISCONTINUITIES AND WELDS Prepared by: F. W. Brust G. M. Wilkowski P. Krishnaswamy K. Wichman Engineering Mechanics Corporation of Columbus (Emc 2 ) Creep
More information~ Springer-Verlag Wien GmbH
~ Springer-Verlag Wien GmbH CISM COURSES AND LECTURES Series Editors: The Rectors Manuel Garcia Velarde - Madrid Jean Salen
More informationDYNAMICS IN THE PRACTICE OF STRUCTURAL DESIGN
DYNAMICS IN THE PRACTICE OF STRUCTURAL DESIGN WIT Press publishes leading books in Science and Technology. Visit our website for the current list of titles. www.witpress.com WITeLibrary Home of the Transactions
More informationEFFECTIVE MARKETING LOGISTICS
EFFECTIVE MARKETING LOGISTICS EFFECTIVE MARKETING LOGISTICS The Analysis, Planning and Control of Distribution Operations Graham Buxton M Graham Buxton 1975 Softcover reprint of the hardcover 1st edition
More informationPlastic Forming Processes
Plastic Forming Processes Plastic Forming Processes Maurice Reyne First published in France in 2006 by Hermes Science/Lavoisier entitled: Transformations, assemblages et traitements des plastiques First
More informationSustainable Innovation Strategy
Sustainable Innovation Strategy This page intentionally left blank Sustainable Innovation Strategy Creating Value in a World of Finite Resources Christophe Sempels Associate Professor of Sustainable Development
More informationLevels of Corporate Globalization
Levels of Corporate Globalization This page intentionally left blank Levels of Corporate Globalization Developing a Measurement Scale for Global Customer Management Petra Kuchinka Assistant Professor,
More informationLecture Notes in Energy 5
Lecture Notes in Energy 5 For further volumes: http://www.springer.com/series/8874 . Hortensia Amaris Monica Alonso Carlos Alvarez Ortega Reactive Power Management of Power Networks with Wind Generation
More informationRETAIL MARKETING MANAGEMENT
RETAIL MARKETING MANAGEMENT Also by David Walters STRATEGY IN RETAILING (with D. Knee) INTRODUCTION TO MARKETING (with M. Christopher and G. Wills) EFFECTIVE DISTRIBUTION MANAGEMENT (with M. Christopher
More informationINTRODUCTION TO THE HIGH-TEMPERATURE OXIDATION OF METALS
INTRODUCTION TO THE HIGH-TEMPERATURE OXIDATION OF METALS A straightfoward treatment describing the oxidation processes of metals and alloys at elevated temperatures. This new edition retains the fundamental
More informationEntrepreneurial Marketing for SMEs
Entrepreneurial Marketing for SMEs This page intentionally left blank Entrepreneurial Marketing for SMEs Luca Cacciolatti University of Westminster, UK and Soo Hee Lee University of Kent, UK Luca Cacciolatti
More informationManaging e-business Projects
Managing e-business Projects Springer-Verlag Berlin Heidelberg GmbH Thomas Stoehr Managing e-business Projects 99 Key Success Factors With 37 Figures and 12 Tables Springer Thomas Stoehr Overbeckstr. 7
More informationWaste Treatment and Disposal
Waste Treatment and Disposal Waste Treatment and Disposal, Second Edition Paul T. Williams 2005 John Wiley & Sons, Ltd ISBNs: 0-470-84912-6 (HB); 0-470-84913-4 (PB) Waste Treatment and Disposal Second
More informationFatigue Evaluation of Reinforced Concrete Highway Bridge
Fatigue Evaluation of Reinforced Concrete Highway Bridge Habeeba A 1, Sabeena M.V 2, Anjusha R 3 P.G. Student, Department of Civil Engineering, A.W.H Engineering College, Calicut, Kerala, India 1 Professor,
More informationMETALLIC MATERIALS SPECIFICATION HANDBOOK
METALLIC MATERIALS SPECIFICATION HANDBOOK METALLIC MATERIALS SPECIFICATION HANDBOOK FOURTH EDITION Robert B. Ross Ross Materials Technology Ltd, East Kilbride, Glasgow Volume I SPRINGER-SCIENCE+BUSINESS
More informationKEY CONCEPTS IN MANAGEMENT
KEY CONCEPTS IN MANAGEMENT Palgrave Key Concepts Palgrave Key Concepts provide an accessible and comprehensive range of subject glossaries at undergraduate level. They are the ideal companion to a standard
More informationOperations Strategy DAVID WALTERS
Operations Strategy Operations Strategy DAVID WALTERS David Walters 2002 All rights reserved. No reproduction, copy or transmission of this publication may be made without written permission. No paragraph
More informationMACMILLAN Directory of UK BUSINESS INFORMATION SOURCES. Third Edition
MACMILLAN Directory of UK BUSINESS INFORMATION SOURCES Third Edition MACMILLAN Directory oi UK BUSINESS INFORMATION SOURCES Third Edition J AMES TUDOR M Macmillan Publishers Ltd, 1987, 1989, 1992 Softcover
More informationExtruding Plastics. A practical processing handbook. D. V. Rosato. Plastics Institute of America Rhode Island School of Design Chatham, MA, USA
Extruding Plastics Extruding Plastics A practical processing handbook D. V. Rosato Plastics Institute of America Rhode Island School of Design Chatham, MA, 02633 USA ^^ SPR1NGER-SCIENCE+BUSINESS MEDIA,
More informationStructural Design Guide to the
Structural Design Guide to the Building Code Structural Design Guide to the Building: Code Edward S. Hoffman President Edward S. Hoffman, Ltd., Chicago, IL David P. Gustafson Vice President of Engineering
More informationPublic Sector Reformation
Public Sector Reformation This page intentionally left blank Public Sector Reformation Values-driven Solutions to Fiscal Constraint Ian Chaston Centrum Catolica, Peru; Moustraining Ltd, UK Ian Chaston
More informationAnalysing Organizational Behaviour
Analysing Organizational Behaviour Analysing Organizational Behaviour Edited by Mike Smith M MACMILLAN Selection, editorial matter, Chapters 1,3,4,10 and 12 Mike Smith 1991 Other individual chapters (in
More informationSimulation Strategies to Reduce Recidivism
Simulation Strategies to Reduce Recidivism Faye S. Taxman April Pattavina Editors Simulation Strategies to Reduce Recidivism Risk Need Responsivity (RNR) Modeling for the Criminal Justice System Editors
More informationTHEORY OF THERMO MECHANICAL PROCESSES IN WELDING
THEORY OF THERMO MECHANICAL PROCESSES IN WELDING Theory of Thermomechanical Processes in Welding by Andrzej Sluzalec Technical University of Czestochowa. Poland ~ Springer A C.I.P. Catalogue record for
More informationEngineering Materials and Processes
Engineering Materials and Processes Series Editor Professor Brian Derby, Professor of Materials Science Manchester Materials Science Centre, Grosvenor Street, Manchester, M1 7HS, UK Other titles published
More informationReliability of Microtechnology
Reliability of Microtechnology Johan Liu Olli Salmela Jussi Särkkä l l James E. Morris Per-Erik Tegehall l Cristina Andersson Reliability of Microtechnology Interconnects, Devices and Systems Johan Liu
More informationThe New Global Marketing Reality
The New Global Marketing Reality This page intentionally left blank The New Global Marketing Reality Richard Brookes and Roger Palmer Richard Brookes and Roger Palmer 2004 Softcover reprint of the hardcover
More informationCash Flow Analysis and Forecasting
Cash Flow Analysis and Forecasting For other titles in the Wiley Finance series please see www.wiley.com/finance Cash Flow Analysis and Forecasting The Definitive Guide to Understanding and Using Published
More informationSTP-NU-018 CREEP-FATIGUE DATA AND EXISTING EVALUATION PROCEDURES FOR GRADE 91 AND HASTELLOY XR
STP-NU-018 CREEP-FATIGUE DATA AND EXISTING EVALUATION PROCEDURES FOR GRADE 91 AND HASTELLOY XR Date of Issuance: May 21, 2009 This report was prepared as an account of work sponsored by U.S. Department
More informationPublic Management and Administration
Public Management and Administration Also by Owen E. Hughes AUSTRALIAN POLITICS AUSTRALIAN POLITICS: Realities in Conflict (with Hugh I. Emy) INTERGOVERNMENTAL RELATIONS AND PUBLIC POLICY (editor with
More informationVolunteering and Society in the 21st Century
Volunteering and Society in the 21st Century This page intentionally left blank Volunteering and Society in the 21st Century Colin Rochester Roehampton University, UK Angela Ellis Paine Institute for Volunteering
More informationAssessing Microbial Safety of Drinking Water
Assessing Microbial Safety of Drinking Water IMPROVING APPROACHES AND METHODS Published on behalf of the World Health Organization and the Organisation for Economic Co-operation and Development by This
More informationRELIABILITY AND MAINTAINABILITY IN PERSPECTIVE
RELIABILITY AND MAINTAINABILITY IN PERSPECTIVE Also by the same author Reliability Engineering, Pitman, 1972 Maintainability Engineering, Pitman, 1973 (with A. H. Babb) Statistics Workshop, Technis, 1974
More informationLOCAL GOVERNMENT ECONOMICS
LOCAL GOVERNMENT ECONOMICS Also by Stephen J. Bailey PUBLIC SECTOR ECONOMICS: Theory, Policy and Practice Local Government Economics Principles and Practice STEPHEN J. BAILEY Professor of Public Sector
More informationDeformation Compatibility Control for Engineering Structures
Deformation Compatibility Control for Engineering Structures Hanhua Zhu Zhihui Zhou Mengchong Chen Jianliang Deng Deformation Compatibility Control for Engineering Structures Methods and Applications 123
More informationA TEXT-BOOK OF METALLURGY
A TEXT-BOOK OF METALLURGY A TEXT-BOOK OF METALLURGY BY A. R. BAILEY, M.Sc., Ph.D., D.I.C., A.I.M. ROYAL SCHOOL OF MINES, IMPERIAL COLLEGE OF SCIENCE AND TECHNOLOGY Second Edition Macmillan Education 1967
More informationAircraft Structures. for engineering students. Fifth Edition
Aircraft Structures for engineering students Fifth Edition Aircraft Structures for engineering students Fifth Edition T. H. G. Megson AMSTERDAM BOSTON HEIDELBERG LONDON NEW YORK OXFORD PARIS SAN DIEGO
More informationCompetitive Identity
Competitive Identity This page intentionally left blank COMPETITIVE IDENTITY The New Brand Management for Nations, Cities and Regions Simon Anholt Simon Anholt 2007 All rights reserved. No reproduction,
More informationInternational Dictionary of Marketing and Communication
International Dictionary of Marketing and Communication Other books by Frank Jefkins Advertising Advertising Made Simple Advertising Today (third edition) Communication in Industrializing Countries (with
More informationLIFE CYCLE RELIABILITY ENGINEERING
LIFE CYCLE RELIABILITY ENGINEERING Life Cycle Reliability Engineering. Guangbin Yang Copyright 2007 John Wiley &Sons, Inc. ISBN: 978-0-471-71529-0 LIFE CYCLE RELIABILITY ENGINEERING Guangbin Yang Ford
More informationMarketing Plans for Services
Marketing Plans for Services Marketing Plans for Services A Complete Guide Third Edition Malcolm McDonald, Pennie Frow and Adrian Payne A John Wiley & Sons, Ltd, Publication This edition first published
More informationDependent Self-Employment
Dependent Self-Employment This page intentionally left blank Dependent Self-Employment Workers on the Border Between Employment and Self-Employment Ulrike Muehlberger Vienna University of Economics and
More informationBRICKWORK 3 AND ASSOCIATED STUDIES
BRICKWORK 3 AND ASSOCIATED STUDIES Related volumes Brickwork 1 and Associated Studies Brickwork 2 and Associated Studies ~ S Harold Bailey and David Hancock Other title of interest The SkillsofPlastering,
More informationCredit Scoring, Response Modelling and Insurance Rating
Credit Scoring, Response Modelling and Insurance Rating Also by Steven Finlay THE MANAGEMENT OF CONSUMER CREDIT CONSUMER CREDIT FUNDAMENTALS Credit Scoring, Response Modelling and Insurance Rating A Practical
More informationTHERMOELECTRIC REFRIGERATION
THERMOELECTRIC REFRIGERATION THE INTERNATIONAL CRYOGENICS MONOGRAPH SERIES Volumes in preparation Very High Magnetic Fields Superconductivity for Engineers Cryogenic Laboratory Equipment Superconductivity
More informationScientific Basis of Air Conditioning
Scientific Basis of Air Conditioning -Second Edition - by KEN-ICHI KIMURA Professor Emeritus of Architectural Science, Waseda University, Tokyo, Japan INTERNATIONAL RESEARCH INSTITUTE ON HUMAN ENVIRONMENT
More informationCost-Benefit Analysis
Cost-Benefit Analysis Other books by D. W. Pearce published by Macmillan Cost-Benefit Analysis: Theory and Practice (with A. K. Dasgupta) Capital Investment Appraisal (with C. J. Hawkins) The Dictionary
More informationRISK MANAGEMENT AND THE ENVIRONMENT: AGRICULTURE IN PERSPECTIVE
RISK MANAGEMENT AND THE ENVIRONMENT: AGRICULTURE IN PERSPECTIVE Risk Management and the Environment: Agriculture in Perspective Edited by Bruce A. Babcock Center for Agricultural and Rural Development
More informationPRESTRESSED CONCRETE DESIGN
PRESTRESSED CONCRETE DESIGN A01_Prestressed Concrete Design_FM.indd i 4/29/2013 4:00:08 PM A01_Prestressed Concrete Design_FM.indd ii PRESTRESSED CONCRETE DESIGN Praveen Nagarajan Department of Civil Engineering
More informationDESIGN OF PILE FOUNDATIONS IN LIQUEFIABLE SOILS
DESIGN OF PILE FOUNDATIONS IN LIQUEFIABLE SOILS This page intentionally left blank DESIGN OF PILE FOUNDATIONS IN LIQUEFIABLE SOILS Gopal Madabhushi University of Cambridge, UK Jonathan Knappett University
More informationGLOBAL WARMING AND ECONOMIC DEVELOPMENT
GLOBAL WARMING AND ECONOMIC DEVELOPMENT Advances in Computational Economics VOLUME 2 SERIES EDITORS Hans Amman, University of Amsterdam, Amsterdam, The Netherlands Anna Nagumey, University of Massachusetts
More informationUnit 48: Structural Behaviour and Detailing for Construction. Limit State Design
2.1 Introduction Limit State Design Limit state design of an engineering structure must ensure that (1) under the worst loadings the structure is safe, and (2) during normal working conditions the deformation
More informationMeta-heuristic Algorithms for Optimal Design of Real-Size Structures
Meta-heuristic Algorithms for Optimal Design of Real-Size Structures Ali Kaveh Majid Ilchi Ghazaan Meta-heuristic Algorithms for Optimal Design of Real-Size Structures 123 Ali Kaveh Department of Civil
More informationHigh-Chromium Ferritic and Martensitic Steels for Nuclear Applications
High-Chromium Ferritic and Martensitic Steels for Nuclear Applications Ronald L. Klueh and Donald R. Harries ASTM Stock Number: MONO3 ASTM 100 Barr Harbor Drive P.O. Box C700 West Conshohocken, PA 19428-2959
More informationStochastic Models in Reliability and Maintenance
Stochastic Models in Reliability and Maintenance Springer-Verlag Berlin Heidelberg GmbH Shunji Osaki Editor Stochastic Models in Reliability and Maintenance With 46 Figures and 11 Tables " Springer Professor
More informationExercises in Environmental Physics
Exercises in Environmental Physics Valerio Faraoni Exercises in Environmental Physics Valerio Faraoni Physics Department Bishop s University Lennoxville, Quebec J1M 1Z7 Canada vfaraoni@cs-linux.ubishops.ca
More information