Organic Silicon Resin 1.Methyl phenyl silicone resin Product Appearance Solid % Curing Viscosity S Thermal condition weight loss (250 X3h)% 1053G 1153D colorless to slightly yellowish transparent non-mechanica l impurities are allowed Copper sheet 2h Copper sheet 1h 20-50 20-50 Aluminum sheet/ 250 500h Copper sheet Copper sheet 300h 5 5 100 Jing Have excellent high-temperature and lowtemperature,, good electric isolation, arc and corona Have excellent electric insulation, arc and corona, high-temperature, hydrophobic and moisture, weather aging, ozone and excellent chemical stability Large amount applied into basic resin for high-temperature coating, special coatings, general high-temperature and low-temperature insulation impregnating paintings, covering paint, H-grade electrical insulating material Mainly applied in H-grade electrical insulating material, glass mica type(plate), electric insulating impregnating paints, cover paints, moisture resistant, capacitance impregnation and paper processing for special purpose
Product Appearance Solid % Curing Viscosi Thermal condition ty S weight loss (paing- (250 X3h)% 4 Have excellent high-temperature and Large amount of 1056 is 1056 1056D colorless to slightly yellowish transparent non-mechanica l impurities are allowed 55±1 Touch to dry at normal temperature completed cured Copper sheet (250 ) 30min Touch to dry at normal temperature completed cured Copper sheet (250 ) 30min 25-60 25-60 Aluminum sheet/ 250 500h Copper sheet Aluminum sheet/ 250 500h Copper sheet 5 5 Toluene 100 Jing low- temperature,, good electric isolation, arc and corona. The produce can be dry fast at normal temperature. The hardness after completely cured( 2H), high glossiness, good fullness, do not turn yellow at high temperature and high- temperature High advantages of epoxy resin and organic silicon resin, good corrosion. It is heat-resistant, oil-, insulating and adhesive. It can cure at room and low temperatures applied high-temperature coating. It is recommended to be used at temperature higher than 600, such as BBQ grill, garden rack, high-temperature furnace, muffler of automobiles and H-grade insulating coating applied high-temperature coating. It is recommended to be used at temperature higher than 600, such as BBQ grill, garden rack, high-temperature furnace, muffrer of automobiles
2.Modified organic silicone resin 2.1 Epoxy modification Product Appearance Solid % Curing condition Surface dry:1.5h, -30 Solid dry:48h colorless to (normal slightly temperature) yellowish transparent Surface non-mechanica dry:1.5h, l impurities are -60 Solid dry:48h allowed (normal temperature) Viscosity S 20-50 40-80 150h Epoxy value 0.03-0.08 0.06-0.16 High advantages of epoxy Can be applied in series resin and organic silicon resin, high-temperature resistant coatings, good corrosion. It is weather coatings, heat-resistant, oil-, anti-corrosive coatings for internal butanol insulating and adhesive. It can wall of high-temperature equipment, cure at room and low H-grade organic insulating paint and temperatures H-grade electrical insulating materials High advantages of epoxy Can be applied in series resin and organic silicon resin, high-temperature resistant coatings, good corrosion. It is weather coatings, heat-resistant, oil-, anti-corrosive coatings for internal butanol insulating and adhesive. It can wall of high-temperature equipment, cure at room and low H-grade organic insulating paint and temperatures H-grade electrical insulating materials
Product Appearance Solid % Curing Viscosity S Epoxy condition value 1063-55 colorless to slightly yellowish transparent non-mechanica l impurities are 55±1 Surface dry at normal temperature, complete curing: 250 /20min 50-100 0.02-0.07 butanol High advantages of epoxy resin and organic silicon resin, good corrosion. It is heat-resistant, oil-, insulating and adhesive. It can cure at room and low temperatures Can be applied in series high-temperature resistant coatings, weather coatings, anti-corrosive coatings for internal wall of high-temperature equipment, H-grade organic insulating paint and H-grade electrical insulating materials allowed 2.2 Acrylic acid modification Product Appearance Solid % Curing condition Viscosity S Touch to dry 1046 2-4h and surface 55±1 dry 10-30min 80-160 non-mechanical at 25 High excellent Large amount of the product is applied high-temperature and in dry and high-temperature low-temperature, and super good glossiness and hardness weather-resistant coatings. It can after curing maintain gloss and color
Product Appearance Solid % Curing condition Viscosity S 1046D non-mechanical Fast surface dry at normal temperature, complete curing 200 /40min 25-65 4-8 Butyl ester low-temperature,, good electric insulation. The surface of the product can be dry at normal temperature. Hardness after complete curing is high( 2H), high glossiness and good Large amount of the product is applied in general high-temperature coatings(250-550 ).and weather- coatings fullness 2.3 Alcoholic acid modification Product Appearance Solid % Curing condition Viscosity S 1057 Surface dry at normal 55±1 temperature, complete curing: non-mechanical 250 /40min 25-50 low-temperature, hydrophobic Large amount of the product and moisture, good electric is applied in general insulation. The surface of the product can high-temperature be dry at normal temperature. Hardness coatings(250-550 ).and after complete curing is high( 2H), high weather- coatings glossiness and good fullness
3.Polyester modified silicone resin Product Appearance Solid % Curing condition Viscosity S 1127 Touch to dry at normal temperature, complete curing: 40-80 4-7 CAC low-temperature,, Hardness after complete curing is high( 3H), high glossiness good fullness and yellowing at high temperature Large amount of the product is applied in self-drying and high-temperature coatings(250-550 ),weather-resistanc e coatings. It can maintain gloss and color liquid. Non-mechanical 1038A 59±1 130-260 150h 8-11 Eylene PMA low-temperature,. Hardness after complete curing is high( 3H), high glossiness good fullness and yellowing at high temperature Basic resin of non-stick coatings and special coatings for flat pan, rice cooker, ovens, toaster, electric iron, exhaust ventilator, gas stove and other household appliances
Product Appearance Solid % Curing condition Viscosity S 1068B 59±1 130-260 150h 9-12 Eylene PMA low-temperature,.hardness after complete curing is high( 3H), high glossiness good fullness and yellowing at high temperature Basic resin of non-stick coatings and special coatings for flat pan, rice cooker, ovens, toaster, electric iron, exhaust ventilator, gas stove and other household appliances 1062E-1 liquid. Non-mechanical 90-180 150h 5-9 CAC low-temperature,.hardness after complete curing is high( 3H), high glossiness good fullness and yellowing at high temperature Basic resin of non-stick coatings and special coatings for flat pan, rice cooker, ovens, toaster, electric iron, exhaust ventilator, gas stove and other household appliances
Product Appearance Solid % Curing condition Viscosity S 1068B liquid. Non-mechanical 40-80 Touch to dry at normal temperature, complete curing: ; 280 /20min 5-9 CAC low-temperature, hydrophobic and moisture. Hardness after complete curing is high( 5H), high glossiness good fullness and yellowing at high temperature Large amount of product is applied in the general high temperature coatings 4.Organic silicone medium Product Solid % Curing condition Viscosity S Hydroxyl content The product is organic silicon After the product is polymerized. It can SM 1123 60±1 medium and low molecular be made into pure resin, alcoholic acid 10-15 4-5% 8 silanol, can be made into kinds of modified silicon resin, acrylic acid modified silicon resin. modified silicon resin and epoxy Comprehensive property is good. modified silicon resin