Deutsche Akkreditierungsstelle GmbH Annex to the Accreditation Certificate D-PL-18716-01-00 according to DIN EN ISO/IEC 17025:2005 Period of validity: 17.11.2014 to 13.05.2018 Holder of certificate: Institut für Materialprüfung und Werkstofftechnik Dr. Neubert GmbH Freiberger Straße 1, 38678 Clausthal-Zellerfeld Tests in the fields: corrosion tests, metallographic tests and mechanical-technological tests at metallic materials and parts Abbreviations used: see last page 1 Corrosion tests ISO 3651-1 1998-05 ISO 3651-2 1998-05 DIN EN ISO 2177 2004-08 DIN EN ISO 7539-1 DIN EN ISO 7539-2 Determination of resistance to intergranular corrosion of stainless steels - Part 1: Austenitic and ferritic-austenitic (duplex) stainless steels - Corrosion test in nitric acid medium by measurement of loss in mass (Huey test) Determination of resistance to intergranular corrosion of stainless steels - Part 2: Ferritic, austenitic and ferritic-austenitic (duplex) stainless steels - Corrosion test in media containing sulfuric acid Metallic coatings - Measurement of coating thickness - Coulometric method by anodic dissolution Corrosion of metals and alloys - Stress corrosion testing - Part 1: General guidance on testing procedures Corrosion of metals and alloys - Stress corrosion testing - Part 2: Preparation and use of bent-beam specimen This document is a translation. The definitive version is the original German annex to the accreditation certificate. 1/6
DIN EN ISO 7539-3 DIN EN ISO 7539-4 DIN EN ISO 7539-5 DIN EN ISO 7539-6 2012-01 DIN EN ISO 7539-7 2005-05 + Amendment 2006-02 DIN EN ISO 196 DIN EN ISO 9400 1995-12 DIN 50905-1 2009-09 DIN 50905-2 1987-01 DIN 50905-3 1987-01 DIN 50905-4 1987-01 DIN 50915 1993-09 DIN 50916-1 1976-08 Corrosion of metals and alloys - Stress corrosion testing - Part 3: Preparation and use of U-bend specimens Corrosion of metals and alloys - Stress corrosion testing - Part 4: Preparation and use of uniaxially loaded tension specimens Corrosion of metals and alloys - Stress corrosion testing - Part 5: Preparation and use of C-ring specimens Corrosion of metals and alloys - Stress corrosion testing - Part 6: Preparation and use of precracked specimens for tests under constant load or constant displacement Corrosion of metals and alloys - Stress corrosion testing - Part 7: Method for slow strain rate testing Wrought copper and copper alloys - Detection of residual stress - Mercury(I)nitrate test Nickel-based alloys - Determination of resistance to intergranular corrosion Corrosion of metals - Corrosion testing - Part 1: General guidance Corrosion of metals - Corrosion testing - Corrosion characteristics under uniform corrosion attack Corrosion of metals - Corrosion testing - Corrosion characteristics under nonuniform and localized corrosion attack without mechanical stress Corrosion of metals - Corrosion testing - Corrosion testing in liquids under laboratory conditions without mechanical stress Testing the resistance of unalloyed and low alloy steels to intergranular stress corrosion cracking by attack of nitrate medium - Welded and unwelded materials Testing of copper alloys - Stress corrosion cracking test in ammonia, testing of tubes, rods and profiles Period of validity: 17.11.2014 to 13.05.2018 - Translation - 2/6
DIN 50916-2 1985-09 DIN 50919 1984-02 DIN 50982-3 1987-08 DIN EN ISO 3882 2003-10 ASTM A 262-10 2010 ASTM A 923-08 2008 ASTM B 627-84 1984 ASTM G1-03() 2003 ASTM G3-89(2010) 1989 ASTM G5-94()e1 1994 ASTM G28-02(2008) 2002 ASTM G30-97(2009) 1997 ASTM G36-94(2006) 1994 ASTM G38-01(2007) 2001 ASTM G39-99() 1999 Testing of copper alloys - Stress corrosion cracking test using ammonia - Testing of components Corrosion of metal - Investigations of galvanic corrosion in electrolytic solutions Measurement of coating thickness - General working principles (withdrawn standard, replaced by DIN EN ISO 3882) Metallic and other inorganic coatings - Review of methods of measurement of thickness Standard Practices for Detecting Susceptibility to Intergranular Attack in Austenitic Stainless Steels Standard Test Methods for Detecting Detrimental Intermetallic Phase in Duplex Austenitic/Ferritic Stainless Steels Standard Test Method for Electrolytic Corrosion Testing (EC-Test) (withdrawn document) Standard Practice for Preparing, Cleaning, and Evaluating -Corrosion Test Specimens Standard Practice Applicable to Electrochemical Measurements in Corrosion Testing Standard Reference Test Method for Making Potentiostatic and Potentiodynamic Anodic Polarization Measurements Standard Test Method of Detecting Susceptibility to Intergranular Attack in Wrought, Nickel-Rich, Chromium-Bearing Alloys Standard Practice for Making and Using U-Bend Stress-Corrosion Test Specimens Evaluating Stress-Corrosion-Cracking Resistance of Metals and Alloys in a Boiling Magnesium Chloride Solution Standard Practice for Making and Using C - Ring Stress Corrosion Test Specimens Standard Practice for Preparation and Use of Bent-Beam Stress Corrosion Test Specimens Period of validity: 17.11.2014 to 13.05.2018 - Translation - 3/6
ASTM G46-94(2005) 2005 ASTM G48-11 ASTM G 49-85() 1985 ASTM G78-01(2012) 2001 ASTM G102-89(2010) 1989 ASTM G150-99(2010) 1999 NACE TM0169 / ASTM G31-12a 2012 NACE TM0177-2005 2005 NACE TM0284- SEP 1861 1982-01 SEP 1877 1994-07 DN AV SCC 3.03 2013 Standard Practice for Examination and Evaluation of Pitting Corrosion Standard Test Method for Pitting and Crevice Corrosion Resistance of Stainless Steels and Related Alloys by the Use of Ferric Chloride Solution Standard Practice for Preparation and Use of Direct Tension Stress - Corrosion Test Specimens Standard Guide for Crevice Corrosion Testing of Iron-Base and Nickel- Base Stainless Alloys in Seawater and Other Chloride Containing Aqueous Environments Standard Practice of Calculation of Corrosion Rates and Related Information from Electrochemical Measurements Standard Test Method for Electrochemical Critical Pitting Temperature Testing of Stainless Steels Standard Guide for Laboratory Immersion Corrosion Testing of Metals Standard Test Method: Laboratory Testing of Metals for Resistance to Sulfide Stress Cracking in H2S Environments Standard Test Method: Evaluation of Pipeline Steels for Resistance to Stepwise Cracking Testing of welded joints at plain and low-alloy steels for their resistance against stress corrosion cracking Test of the resistance of high-alloy, corrosion-proof materials against intercrystalline corrosion Stress corrosion cracking tests in aqueous and non-aqueous liquids using tensile tests, bending tests, C-ring samples or loop samples at temperatures up to 300 C under gas load up to 400 bar Period of validity: 17.11.2014 to 13.05.2018 - Translation - 4/6
2 Metallographic tests DIN EN ISO 1463 2004 DIN 50601 1985 DIN 50602 1985 SEP 1570 1971 SEP 1572 1971-08 ASTM E 3-11 ASTM E 45-11a ASTM E 112-10 2010 ASTM E 562-11 ASTM E 1181-02(2008) 2002 Metallic and oxide coatings - Measurement of coating thickness - Microscopical method Metallographic examination - Determination of the ferritic or austenitic grain size of steel and ferrous materials Metallographic examination - Microscopic examination of special steels using standard diagrams to assess the content of non-metallic inclusions Microscopic test of stainless steels to non-metallic inclusions with images (withdrawn document) Microscopic test of free cutting steels for solid nonmetallic inclusions in metal by means of strip mosaics Standard Methods of Preparation of Metallographic Specimens Standard Practice for Determining the Inclusion Content of Steel - Microscopical Methods Standard Test Method for Determining Average Grain Size Standard Test Method for Determining Volume Fraction by Systematic Manual Point Count Standard Test Methods for Characterizing Duplex Grain Sizes 3 Mechanical-technological tests DIN EN ISO 6507-1 2006-03 DIN EN ISO 6508-1 2006-03 Metallic materials - Vickers hardness test - Part 1: Test method Metallic materials - Rockwell hardness test - Part 1: Test method (scales A, B, C, D, E, F, G, H, K, N, T) (here: Scala C) Period of validity: 17.11.2014 to 13.05.2018 - Translation - 5/6
DIN EN ISO 7438 2012-03 DIN 50100 1978-02 DIN 50106 1978-12 DIN EN ISO 12737 2005-10 BS 7448-1 1991-12 BS 7448-2 1997-08 DIN EN 10002-1 2001-12 DIN EN ISO 6892-1 2009-12 Metallic materials - Bend test Testing of Materials - Continuous Vibration Test, Definitions, Symbols, Procedure, Evaluation Testing of Metallic Materials Compression Test Metallic materials - Determination of plane-strain fracture toughness Fracture mechanics toughness test - Method for determination of KIc, critical CTOD and critical J values of metallic materials Fracture mechanics toughness test - Method for determination of KIc, critical CTOD and critical J values of welds in metallic materials Tensile testing - Part 1: Method of testing at ambient temperature (withdrawn standard, replaced by DIN EN ISO 6892-1) Metallic materials - Tensile testing - Part 1: Method of test at room temperature (here: Method B) abbreviations used: ASTM BS DN AV NACE SEP American Society for Testing and Materials British Standard In-house method by Institut für Materialprüfung und Werkstofftechnik Dr. Neubert GmbH National Association of Corrosion Engineers Iron-Steel-test sheets from the German Iron and Steel Institute Period of validity: 17.11.2014 to 13.05.2018 - Translation - 6/6