TAKING THE OUT OF STUCCO. An innovative cement panel exterior. Producing a stucco

Similar documents
Matching Textures Meant Adopting Some Unconventional Techniques But It Worked!

Inspection Fundamentals: Stucco & EIFS

XTREME-BOND INSTALLATION SYSTEM

1/2 in. (12.7 mm) and 5/8 in. (15.9 mm) glass mesh. It has an exceptionally hard, durable surface that can withstand prolonged exposure to moisture.

MANUFACTURER S (SHORT FORM) SPECIFICATION / SECTION

MANUFACTURERS (SHORT FORM) SPECIFICATION / SECTION

PERM-FLEX ASSEMBLY DIRECT APPLICATION TO CEMENTITIOUS SUBSTRATES MANUFACTURERS SPECIFICATION / SECTION 09960

Finish Flooring- Hard Flooring Materials

Beginning of the Course

SIDER-BASE CONCENTRATE AAC/ MONOSIDERAL AAC THE ULTIMATE OLD-WORLD AERATED CONCRETE-AAC DECORATIVE STUCCO SYSTEM

SPECIFICATION GUIDELINE

Architectural GFRC. Project Gilbert Christian High School. L. Smith / H & S International LLC. general contractor. S T O N E Location Gilbert, Arizona

SPECIFICATION GUIDELINE

MONOBASE AAC/ SIDER-PLAST THE ULTIMATE EXTERIOR HARD COAT STUCCO SYSTEM FOR AUTOCLAVED AERATED CONCRETE

EUROPLAST. Color 20 standard colors, see color chart for specifics. Special colors available upon request, virtually no limit to selection of shades.

390 Viking Circle Rio, Wisconsin DESCRIPTION TOTAL WALL SL Gold Hard Coat EIFS is a nonbearing

2013 COMMERCIAL PRODUCTS

The Right Choice for Stucco.

m^obu EXTERIOR INSULATION AND FINISH SYSTEMS STUCCO

Stucco: The Return of the Best

PERM-FLEX ASSEMBLY DIRECT APPLICATION TO CEMENT BOARD SUBSTRATES MANUFACTURERS SPECIFICATION / SECTION 09960

BENEATH THE SURFACE A Smarter Masonry

SECTION EXTERIOR INSULATION AND FINISH SYSTEMS

Madewell Products Corporation December Industrial Court Alpharetta, GA Office: (770) Fax: (770)

SPECIFICATION GUIDE. thin glazed brick

LaHabra Cementitious Stucco Finishes

Module 11: Plastered walls

INTERIOR FINISHES PORTFOLIO

Corium Brick Rainscreen System Specifications

FastWall WaterMaster Krak-Shield FastWall WaterMaster FastWall Krak-Shield FastWall. FastWall Stucco and High Efficiency Assemblies

ProGUARD DP The Game-changing Wall System

specification guide FARMHOUSE BRICK a clé exclusive

OCS ONE COAT STUCCO A custom blend of Portland cement, sand, extenders, fiber reinforcement and modifiers.

SECTION EXTERIOR INSULATION AND FINISH SYSTEM

CTIOA REPORT

Armourwall Stucco Systems

SECTION Fiber Reinforced Stucco 1

MANUFACTURER S SPECIFICATIONS Section ST. ASTIER LIME PLASTER (NHL) MASONRY [BLOCKS] [BRICKS] [STONE]

Magna Wall. Scratch and Brown with Fiber. Product Overview, Instructions, & Data. Durable

PPC Cement TUTORIAL. how to screed a floor

MANUFACTURER'S SPECIFICATIONS Section ST. ASTIER LIME PLASTER (NHL) PLASTER ON CONCRETE

EDGEWATER, FLORIDA JUNE 14, 2010

The Heritage Range.

WHATEVER THE CHALLENGE, PHILLIPS HAS YOU COVERED.

EDGEWATER, FLORIDA JUNE 14, 2010

SECTION EXTERIOR INSULATION AND FINISH SYSTEMS

EXPLORE GEOMETRY AND SPACE

Real Stone Cladding. stone cladding system

Method Statement. For RSA Cement Renders Over Masonry Substrates

SECTION ARCHITECTURAL PRECAST CONCRETE. C. Section Joint Sealers: Perimeter joints with sealant and backing.

About Us History Corporate Office Utah Manufacturing Mission Statement Sales Office Atlanta (Metro) Manufacturing masterwall.com

DIVISION 3 - CONCRETE Section Concrete Rehabilitation

CUSTOM BRICK. Custom Brick Finish Polymer System Specifications For Use On Vertical Walls DS151. Architectural Finish for Use on Vertical Walls

PRODUCT DATA. synthetic plaster finish. Elegant old world charm with the added strength and durability of today s superior product chemistry.

for the master tradesman Setcrete Product Guide

SECTION TILING

COLOR SELECTION. Cool

CUSTOM BRICK. Custom Brick Finish Polymer System Specifications For Use On Vertical Walls DS151. Architectural Finish for Use on Vertical Walls

19 East Ave. Mullica Hill, N.J Phone: Fax: ARCHITECTURAL FOAM FABRICATORS, LLC.

Madewell Products Corporation December Industrial Court Alpharetta, GA Office: (770) Fax: (770)

SECTION GYPSUM BOARD

Substitution Request

Ultra-High Performance Wall System Glass Fiber Reinforced Concrete

GLOBAL PROPERTY INSPECTIONS TECHNICAL BULLETIN

3910 E. McKinney Denton, TX P.O. Box Dallas, TX EZ WALL CONCENTRATE, INC

SERIES STB30 STEEL FIXED THERMAL BREAK DETENTION WINDOWS SECTION 08651

Contec is AAC. 1. Contec is AAC

DIVISION 3 - CONCRETE Section Concrete Toppings Section Concrete Resurfacing Section Concrete Rehabilitation

CHAPTER 10: Finishes CONTENTS 10.1 PLASTERWORK 10.2 SECOND AND THIRD FIX FINISHES. Chapter 10

Limited Exterior Masonry Assessment Roosevelt Elementary School

SECTION MANUFACTURED MASONRY VENEER

ARDEX GUIDE SPECIFICATION ARDEX SD-M Designer Floor Finish

Caulks & Sealants. Professional. Catalog

CHAPTER 10: Finishes CONTENTS 10.1 PLASTERWORK ND AND 3 RD FIX FINISHES

CSI SECTION PORTLAND CEMENT PLASTER PART 1 - GENERAL. LaHabra Fiber Reinforced Stucco Acrylic or Elastomeric Finish and Optional Krak-Shield

Structalath Twin Trac 316 System Section Corporate P.O. Box 397 Fortson Georgia FAX Technical

LaHabra Fastwall 300 WaterMaster AF over CMU Stucco Assemblies Specification

For RSA Coating Systems over For RSA Coating Systems over Austech Foamula Extruded Polystyrene (XPS) (Skin Off)

Interior Finish Materials

Exclusive US Representative for Kolmer Industries, a European manufacturer of patented coatings and pigmentation for over 75 years.

Sto Guide Specification No. F601S StoQuik Gold Finish System for Soffits and Ceilings

RediMat. surface applied. Features. Physical Characteristics. Installation. Colors. Sizes. the original flexible surface applied mat

Section ShurKote Cement Board Coatings Specification

Section Shotcrete

Triton WP Waterproof Membrane

ICC-ES Evaluation Report Reissued April 1, 2010 This report is subject to re-examination in two years.

RENEW ELASTOMERIC ACRYLIC COATING (PAINT GRADE) MANUFACTURERS SPECIFICATION / SECTION

DIVISION 3 CONCRETE Section Concrete Rehabilitation

REPORT HOLDER: COREV AMERICA BRITTMOORE PARK DRIVE HOUSTON, TEXAS EVALUATION SUBJECT:

DIVISION: THERMAL AND MOISTURE PROTECTION SECTION: WATER RESISTIVE BARRIERS/WEATHER BARRIERS REPORT HOLDER: PAREX USA, INC.

Parex Continuous Insulation (CI)

SECTION CEMENT BOARD SUPPORTED ADHERED MASONRY VENEER. 2. Installation materials including adhesives, mortars, and pointing mortars.

1.02 SUMMARY A. Section Includes: 1. Repair of two-coat historic exterior vertical plasterwork (stucco)

New Veneers Allow Greater Flexibility

(Ord , ); (Ord , ) CHAPTER 7-11b. DESIGN STANDARDS: SINGLE-FAMILY RESIDENTIAL

DIVISION: THERMAL AND MOISTURE PROTECTION SECTION: DIRECT-APPLIED FINISH SYSTEMS REPORT HOLDER: BASF CORPORATION WALL SYSTEMS

STRENGTH AND DURABILITY OF THE INSTALLED STONE

RP PRODUCTS FOR THERMAL INSULATION

FOCAL POINT RENDAPANEL TM CLADDING SYSTEM

CTIOA REPORT (Rev )

Transcription:

TAKING Producing a stucco finish can be timeconsuming, but a new cement panel offers good looks and the economies of panelized construction The wall contractor for this Atlanta area home said: Traditional Portland cement stucco is subject to surface cracking and colors are not always uniform. The new cement panels provide the stability end durability we need. THE Stuck OUT OF STUCCO An innovative cement panel exterior system that combines the strength and durability of concrete with the easy installation benefits of a 4-by-8 foot panel system, and uses conventional tools and construction skills, allows contractors to bid on exterior jobs using the same substrate and basic construction techniques for a wide range of exterior designs. Initially introduced in 1987 by United States Gypsum Company as a substrate for thin-brick, ceramic tile, and epoxy matrix stone aggregate, Durock cement board system now is approved as a base for the firm s new Durock exterior finish. This new stucco-look exterior basecoat and finish product comes in coarse and fine textures, and is available in 20 colors. Depending on the troweling technique used, the finish can provide a lace-, Spanish-, sandstone- or float-textured stucco appearance. The Durock exterior finish system already has been used successfully on a number of buildings, with contractors reporting cost savings and improved performance, according to the manufacturer. Applications have included residential as well as light commercial Construction Dimensions/August 1988 23

24 August 1988/Construction Dimensions buildings up to four stories high, and panelized construction. Elements of the new exterior finish system work in unison to assure a longlasting exterior wall. Components include: 4-by-8-foot Durock exterior cement board (backed by a water barrier), exterior basecoat, exterior finish, exterior tape, corner-bead and trim, and screws. The cement boards are made from cement slurry, reinforced with polymer-coated woven glass-fiber mesh to provide a rigid, impact-resistant substrate for application of the basecoat and exterior finish. In a typical installation, cement boards are attached with screws over a water barrier to either wood or non-load bearing steel framing. The self-tapping screws are coated to provide rust protection for exterior applications. Oversized wafer-shaped screw heads seat the screws without breaking the reinforcement to provide tight, long-lasting attachments to the framing member. Once the boards are in place, joints are taped with self-sticking exterior tape. Then the joints are treated with ex-

Contractors can use the same techniques for a wide range of exterior designs. terior basecoat (a ready-to-mix latexfortified Portland cement mortar) which is applied over the tape and forced into the joints. Treated joints cure for a minimum of 24 hours. Next, the same basecoat is applied over the entire board area. After another 24-hour cure time, exterior finish is troweled on to provide desired texture. The exterior finish features a 100 percent acrylic polymer elastometric coating to accommodate thermal expansion and contraction without cracking or delamination. The system has been tested both by the manufacturer and an independent laboratory to measure how the system stands up to deformation under compressive and flexural loads, water permeance and cyclic freezing and thawing. According to U.S. Gypsum, its exterior finish system is fade- and weather-resistant and will withstand virtually all weather conditions, including high temperatures, humidity, water, wind and repeated freeze-thaw cycles. Cost Savings in Chicago Gary Edwards, vice president of American Acoustics and Plastering, subcontractor for a 7,500-sq. ft. home in Bannockbum, Ill., maintains his crews applied the Durock system in about half the time it would have taken to complete a quality three-coat Portland cement plaster finish. While cost savings were important, the finished appearance was just as significant, as the home is located in an exclusive, upscale subdivision outside Chicago. We couldn t be happier with the appearance of the finish, said the general contractor afterwards. It s a great look. The contemporary exterior design features a juxtaposition of simple geometric shapes. Control joints divide the lightly textured look of the exterior finish system into triangular and rectangular patterns. The geometric motif is continued through the use of triangular window patterns. The steeply pitched roof is covered with terne coated stainless steel sheeting. Edwards claimed several application advantages provided by the Durock system. Taping and treating the joints went so quickly, it s hardly a factor, he maintained. The application of the basecoat also went very quickly. We found it to be easier and smoother to trowel than other basecoats we ve used. Construction Dimensions/August 1988 25

And the cement boards provide a very smooth, sound surface for basecoat application-much better than foam/ mesh boards. The workability of the finish is very consistent. It s a wellbehaved material, easy to trowel, easy to work with. The coarse version of the exterior finish was trowel-applied to the Bannockburn home to obtain a float-finish texture. After the finish was allowed to take up, the surface was floated to obtain the desired look. Durability for Atlanta Builder The ability to add trim and ornamentation permits innovative and aesthetic designs, according to an Atlanta contractor. In Newnan, Georgia, the Durock exterior finish system was applied to a 4,000-sq. ft. home in one of the Atlanta area s top subdivisions, White Oak. The prestigious 3,600-acre White Oak A subcontractor for this Cicago-area home said: We applied the cement panel system in about half the time needed for a quality three-coat Portland cement plaster finish. We couldn't be happier with the appearance.

development is one of the largest planned communities in the Southeast. According to Philip Wahlbom of Golden Key Homes, the company is pleased with the results. Because stucco-look exteriors are popular around Atlanta, 80 percent of the homes Golden Key has constructed over the past two years have featured stucco exteriors. The stucco look gives an air of permanence to a home, Wahlbom maintains. And the texture lends itself exceptionally well to the traditional styling which is popular in our area. However, we ve experienced problems with traditional Portland cement stucco. It is subject to surface cracking and colors are not always uniform. From the start, we ve been very much attuned to finding an alternative, but quite frankly we could never find one that met our standards. The coatings over synthetic foam systems didn t provide the stability, durability or longevity we need, But Durock provides the wall stability and durability we need. The flexibility within the finish makes it crack-resistant. Often you can see hairline cracks develop very quickly in Portland cement stucco-sometimes within about two weeks after it s applied. With this product, we haven t seen any. Also, Durock provides a great appearance. According to Wahlbom, the system was easy to apply. There s really nothing exotic or unusual about the system components, he says. Our crews were familiar with all the basic materials and application procedures. Cement boards may be a little heavy, but offer increased strength and structural stability. Golden Key also used Durock to construct quoin treatments around the

28 August 1988/Construction Dimensions home s corners. It s easy and aesthetically pleasing, Wahlbom explains, We originally planned to apply the quoins only around the front corners. But by using the new exterior finish system, the application went so quickly we decided to add quoins to the rear of the home as well. The total installed cost came to just about the same as it would have been using traditional Portland cement techniques. To construct the quoins, cement boards simply were cut to size and attached over the exterior walls. We found the cement board was easy to cut and shape, and the basecoat and finish are easy to apply. And there s absolutely no difference in appearance between these quoins and those we built using Portland cement. Wahlbom maintains the design flexibility the system provides is a major advantage. This new exterior finish system gives us tremendous flexibility in accent and trim ornamentation. It allows us to dress up our homes a little more, and that helps increase curb appeal-and ultimately sales.