KINEMATICS OF RIGID BODIES. y Copyright 1997 by The McGraw-Hill Companies, Inc. All rights reserved. KINEMATICS OF RIGID BODIES

Similar documents
Stacking Spheres. The dimensions of a tetrahedron. The basic structure of a stack of spheres is a tetrahedron.

Phd Program in Transportation. Transport Demand Modeling

4 STRUCTURAL MODELLING

i,... > /. LtoC.So O LA A* - 'v ^ -

Cross-Roller Ring Series

A Shaking Table Test Design on Seismic Strengthened Brick Masonry Structures

Quick Reference: Amplifier Equations

TC burrs for tough applications especially in foundries, dockyards and steel constructions

On Postponed Production Optimization for Two-stage Supply Chain in Mass Customization

SIMILARITY SOLUTION ON UNSTEADY AXI-SYMMETRIC VISCOUS BOUNDARY LAYER FLOW

Numerical Simulation of Gas Tungsten Arc Welding in Different Gaseous Atmospheres. Tashiro, Shinichi; Tanaka, Manabu; Ushio, Masao

Designer Babies. Baby 1

The impact of velocity on thermal energy storage performance of tube type thermocline tank

Analysis of the impact of modification of cold crucible design on the efficiency of the cold crucible induction furnace

Intrinsic Viscosity Measurement for Optimal Therapeutic Formulation

Power Module Installation Notes for TELP Series

GEO-SLOPE International Ltd, Calgary, Alberta, Canada Salt Flow Example

A Note on Void Ratio of Fibre-Reinforced Soils

Lecture 3 Activated sludge and lagoons

Mechanical Behaviour of Materials Chapter 11 Hardening mechanics in metals

CONICAL PIPE ENVELOPE FORMATION PROCESS

Numerical Analysis of Current Attachment at Thermionic Cathode for Gas Tungsten Arc at Atmospheric Pressure

Analysis of the Internal Pressure in Tube Hydroforming and Its Experimental Investigation

An Energy-Economy Model to Evaluate the Future Energy Demand-Supply System in Indonesia

Analysis of Electric Stress in High Voltage Cables Containing Voids

The Research of Risk Management in Two Non-Independent IT System

Lectures on: Introduction to and fundamentals of discrete dislocations and dislocation dynamics. Theoretical concepts and computational methods

Load carrying capacity of innovative Cold Formed Steel column.

Investigation of a Dual-Bed Autothermal Reforming of Methane for Hydrogen Production

International Journal of Solids and Structures

INTERNAL FRICTION AND MAGNETIC LOSSES IN CoPt ALLOY DURING PHASE TRANSITION

SANITARY ENGINEERING ASSISTANT, 7866 SANITARY ENGINEERING ASSOCIATE, 7870 SANITARY ENGINEER, 7872

Blind Multi-Channel Estimation of Arterial Input Function in Dynamic Contrast-Enhanced MRI

DESIGN OF OPTIMAL WATER DISTRIBUTION SYSTEMS

Journal of Chemical and Pharmaceutical Research, 2014, 6(6): Research Article

The 23 rd. Corresponding author: Tel ,

Predicting future changes in climate and evaporation by a stepwise regression method

ABSTRACT. Professor Ashwani K. Gupta Department of Mechanical Engineering

SVENSK STANDARD SS-EN :2004. Obundna och hydrauliskt bundna vägmaterial Del 7: Treaxialtest för obundna vägmaterial

PREFACE BAILEY METAL PRODUCTS LIMITED

10.2% 2.5% FY19 to FY21

GUIDE FOR THE DESIGN OF CRANE-SUPPORTING STEEL STRUCTURES

THE GOODS MARKET AND REAL BUSINESS CYCLES

CASUAL ENQ: UGBPS/TECH-17134/BMD/WAB-CASUAL/22/2011 GAS BASED POWER STATION - UTRAN UTRAN , DIST

PRODUCT CONTROL SECTION

Published in: Proceedings of the International Conference on Power Engineering, ICOPE '09

THE EFFECT OF SHEAR STRENGTH NORMALISATION ON THE RESPONSE OF PILES IN LATERALLY SPREADING SOILS

Evaluation of Mechanical Properties and Material Modeling for a Rocket Thrust Chamber

Plane Truss Stiffness Matrix

ADVANCEMENT OF BRIDGE HEALTH MONITORING BASED ON DISTRIBUTED FIBER OPTIC SENSORS

ACCEPTED VERSION. Published version available via DOI:

Out-of-Merit-Order Dispatch

1. True / False questions (mark the correct answer) : (1 point each) [10]

GTAP-E: An Energy-Environmental Version of the GTAP Model

Geometry Modeling and Simulation of the Wire-Driven Bending Section of a Flexible Ureteroscope

MIAMI-DADE COUNTY PRODUCT CONTROL SECTION DEPARTMENT OF REGULATORY AND ECONOMIC RESOURCES (RER)

Optimal Pricing under The Consumer Segmentation in Dual Channel Supply Chain

Production Policies of Perishable Product and Raw Materials

Geometry of Steering Laws in Cooperative Control

Self-assessment for the SEPA-compliance of infrastructures

MULTI-OBJECTIVE OPTIMIZATION OF PLANNING ELECTRICITY GENERATION AND CO 2 MITIGATION STRATEGIES INCLUDING ECONOMIC AND FINANCIAL RISK

Surface Water Hydrology

( τα ) = Product of transmittance and absorptance

Production Planning under Hierarchical Workforce Environment

Economic and Emotional Rationality: An Application to Wealth Concentration

Economic and Emotional Rationality: An Application to Wealth Concentration

Fig. 1; Study Area, Source (PPC), Meteorological Stations (Souda and Airport) and Modeling Domain.

STRUCTURAL AND VIBRATIONAL RESPONSE ANALYSIS OF H.P. BLADED DISC ASSEMBLY

ADDENDUM NO Q. Can you please tell me if there is any soil stabilization in this project? More specifically, soil nails or micropiles?

MIAMI-DADE COUNTY PRODUCT CONTROL SECTION DEPARTMENT OF REGULATORY AND ECONOMIC RESOURCES (RER)

Whakatu Arterial Link Planning Assessment. June 2014

Parametric Investigation of a Downdraft Gasifier Using Numerical Modelling for Different Biomass Materials in Myanmar

Setting new standards for milling tools

Fuzzy evaluation to parkour social value research based on AHP improved model

MIAMI-DADE COUNTY PRODUCT CONTROL SECTION DEPARTMENT OF REGULATORY AND ECONOMIC RESOURCES (RER)

Numerical Modeling of Friction Welding Process

The equivalent translational stiffness of steel studs

Reporting Checklist for Nature Neuroscience

Study of Heat Affected Zone (HAZ) in Friction Welding Process

GenomeLab GeXP Genetic Analysis System

Wage Differentials, Fairness and Social Comparison: An experimental study of the Co-Employment of Permanent and Temporary Agency Workers

The Global Economy, Trade, Environment and the Climate System (GETEC) Model and a Reference Case for Climate Policy Analysis

Available online at ScienceDirect. Procedia Engineering 122 (2015 )

Conceptual Design. and Cost Estimate. for a Phased. Wastewater. Collection and. Treatment System. Clearwater River. Wenck. Watershed District

MIAMI-DADE COUNTY PRODUCT CONTROL SECTION DEPARTMENT OF REGULATORY AND ECONOMIC RESOURCES (RER)

Water Management of Heat Pump System for Hot Water Supply in a Medium Size Hospital

Oregon and Washington). The second major study used for this report is "Parks and Recreation Information

MODELING AND SIMULATION OF A FUEL CELL REFORMER FOR CONTROL APPLICATIONS

Capturing Natural Resource Dynamics in Top-Down Energy Economic Equilibrium Models

THE VALUE OF GRID-SUPPORT PHOTOVOLTAICS IN PROVIDING DISTRIBUTION SYSTEM VOLTAGE SUPPORT 2. OBJECTIVE

Global Energy Trade Flows and Constraints on Conventional and Renewable Energies A Computable Modeling Approach

Optimum Design of Pipe Bending Based on High- Frequency Induction Heating Using Dynamic Reverse Moment

Structure Integrity Assessment of a Windflow Power Plant s Axle

One-to-one Marketing on the Internet

DIGITAL REPRESENTATION AND ANALYSIS OF GENOMIC DATA

Correlation investigations into pollutant emission and the operational states of compression-ignition engines in dynamic tests

PV panel - wind turbine hybrid system modelling

A Research on The Basic Theories of Systematic Risk Transmission in Enterprise Value Chain

Inventory Strategy of Dual-Channel Supply Chain from Manufacturer's Perspective

Transcription:

KINEMTICS F RIGID DIES Copight 1997 b The McGaw-Hill Companies, Inc ll ights eseved KINEMTICS F RIGID DIES In igid bod tanslation, all points of the bod have the same velocit and the same acceleation at an given instant Consideing the otation of a igid bod about a fied ais, the position of the bod is defined b the angle that the line, dawn fom the ais of otation to a point of the bod, foms with a fied plane The magnitude of the velocit of is ds whee is the time deivative of = sin

ds = sin The velocit of is epessed as d = whee the vecto = = is diected along the fied ais of otation and epesents the angula velocit of the bod d = = = Denoting b the deivative d/ of the angula velocit, we epess the acceleation of as a = + ( ) diffeentiating and ecalling that is constant in magnitude and diection, we find that = = = The vecto epesents the angula acceleation of the bod and is diected along the fied ais of otation

In thee dimensions, the most geneal displacement of a igid bod with a fied point is equivalent to a otation of the bod about an ais though The angula velocit and the instantaneous ais of otation of the bod at a given instant can be defined The velocit of a point of the bod can be epessed as d = Diffeentiating this epession, the acceleation is a = + ( ) Since the diection of changes fom instant to instant, the angula acceleation is, in geneal, not diected along the instanteneous ais of otation / The most geneal motion of a igid bod in space is equivalent, at an given instant, to the sum of a tanslation and a otation Consideing two paticles and of the bod v = v + v / whee v / is the velocit of elative to a fame attached to and of fied oientation Denoting b / the position vecto of elative to, we wite v = v + / whee is the angula velocit of the bod at the instant consideed The acceleation of is, b simila easoning a = a + a / o a = a + / + ( / )

The ate of change of a vecto is the same with espect to a fied Q fame of efeence and with espect to a fame in tanslation i The ate of change of a vecto with espect to a otating ti fame of efeence is diffeent The ate of change of a geneal vecto Q with espect a fied fame and with espect to a fame otating with an angula velocit is (Q) = (Q) + Q The fist pat epesents the ate of change of Q with espect to the otating fame and the second pat, Q, is induced b the otation of the fame i Conside the thee-dimensional motion of a paticle elative to a fame otating with an angula velocit with espect to fied fame The absolute velocit v of can be epessed as v = v + v /F whee v = absolute velocit of paticle v = velocit of point of moving fame F coinciding with v /F = velocit of elative to moving fame F

i The absolute acceleation a of is epessed as a = a + a /F + a c whee a = absolute acceleation of paticle a = acceleation of point of moving fame F coinciding with a /F = acceleation of elative to moving fame F a c = 2 () = 2 v /F = complementa (Coiolis) acceleation The magnitude a c of the Coiolis acceleation is not equal to 2v /F ecept in the special case when and v /F ae pependicula to each othe / The equations and v = v + v /F a = a + a /F + a c emain valid when the fame moves in a nown, but abita, fashion with espect to the fied fame, povided that the motion of is included in the tems v and a epesenting the absolute velocit and acceleation of the coinciding point Rotating fames of efeence ae paticulal useful in the stud of the thee-dimensional motion of igid bodies