ACO INFRASTRUCTURE CurbDrain JULY 2013 Dup to 1,859 psi Standard Curb (150mm) (150mm) 2.23 (57mm) Radius Curb R25 11.80 (300mm) 23.30 (592mm) Centerline 23.56 (598mm) (150mm) 11.80 (300mm) 0.30 (8mm) R25 (7620mm) 6.30 (160mm) 4.23 (107mm) R2.95 (75mm) (mm) 10 (150mm) Closing Cap 23.07 (586mm) Centerline 23.56 (598mm) 11.80 (300mm) 10 6.27 (159mm) Radius Curb R12.5 R2.95 (75mm) 1.97 (50mm) R12.5 (10mm)
ACO INFRASTRUCTURE CurbDrain Access Curb (150mm) Hinged removable cover Outlet Outlet Type Outlet Size Outlet From Invert Depth GPM A Drillout 4 Sch 40 Access curb 135 0.30 B Drillout 6 Sch 40 Access curb 280 0.62 0.30 (8mm) 6.30 (160mm) Outlet Flow Rates Cross Curb Channel 0.31 (8mm) Outside Corner 90 48 (1223mm) 10.43 (265mm) Note: These are the pipe flow rates at the specified outlet, NOT channel flow rates. D 400 CFS 1.18 (30mm) 1.77 (45mm) 3.23 (82mm) 14.02 (356mm) (mm) 7.73 (196mm) 6.30 (160mm) A 9.09 (231mm) B 8.81 (224mm) 90 ACO 97966 ACO 97966 13.14 (334mm) 4.23 (108mm) 2
Driveway Access The short drop curbs and center curb with inlets provide an easy solution for driveways. This solution allows for drainage at the low point but is not ADA compliant. Drop Curb Left 5.94 (151mm) Driveway Center Curb 35.63 (905mm) 11.88 (302mm) 1.56 (40mm) diameter 5.43 (1mm) R2.56 (65mm) Drop Curb Right 10.94 (278mm) 3
ADA Walkway Access 2part drop curbs with inlets and center curb without inlets provide an ideal solution for ADA compliant pedestrian right of ways, sidewalks. The inlets in the 2part drop curb ensure drainage around the low point. Tactile pavers complete the ADA compliant solution. ADA Walkway Drop Curb Right (mm) ADA Walkway Drop Curb Left (mm) ADA Walkway Center Curb 35.63 (905mm) 12.56 (319mm) 12.56 (319mm) R2.56 (65mm) 12.56 (319mm) 1:12 slope (mm) (mm) 4
ACO Catch basin 44.00 (1118mm) C Outlet Flow Rates Outlet Outlet Type Outlet Size Outlet From Invert Depth GPM C Drillout 8 Sch 40 Catch basin 36.89 1,248 2.78 D Drillout 6 Sch 40 Catch basin 36.89 712 1.60 E* Custom cut 10 Sch 40 Catch basin 36.89 1,920 4.28 E* Custom cut 12 Sch 40 Catch basin 36.89 2,722 6.06 * Not a drillout; flat area for custom coredrill/cut Note: These are the pipe flow rates at the specified outlet, NOT channel flow rates. 25.98 (660mm) 23.00 (584mm) 27.50 (698mm) D 25.11 (6mm) CFS Hinged removable cover E* Flat area for customer coredrill up to 12 20.70 (526mm) 36.89 (937mm) 5
6 CurbDrain Part List Description Part Length Invert Depth Overall Depth Weight No inches mm inches mm inches mm lbs Standard curb unit 92399 23.62 600 77.0 Radius curb (R12.5 ) Radius curb (R25 ) Driveway drop curb left Driveway drop curb right Driveway center curb with inlets ADA walkway drop curb left 1 of 2 ADA walkway drop curb left 2 of 2 ADA walkway drop curb right 1 of 2 ADA walkway drop curb right 2 of 2 ADA walkway center curb Detectable warning device 12 red Detectable warning device 24 red Detectable warning device 12 gray Detectable warning device 24 gray 926 92396 97282 97327 97309 92407 92403 92405 92402 97316 927 97314 928 97315 23.56 23.56 23.62 23.62 35.63 35.63 598 598 600 600 905 905 10.08 12.56 12.56 10.08 256 319 319 256 88.5 86.0 73.0 73.0 107.0 94.3 88.5 94.3 88.5 106.1 90 Outside corner 97966 13.14 334 65.0 Closing end cap 97293 1.97 50 16.0 Cross curb channel gray Cross curb channel black 97968 97970 48.00 48.00 1,223 1,223 9.09 9.09 231 231 31.0 62.0 31.0 62.0 106.0 106.0 Access curb 92395 23.62 600 83.0 Catch basin 92390 23.62 600 42.56 1,080 44.00 1,118 528.0 Detectable Warning Device 24 x 24 (mm) 12 x 24 (mm) ACO Polymer Products, Inc. East Sales Office P.O. Box 245 Chardon, OH 44024 Tel: (440) 2857000 Toll free: (800) 5434764 Fax: (440) 2857005 1.00 (25mm) (mm) Air hole (4 No) 2.00 (51mm) 12.00 (305mm) 2.00 (51mm) West Sales Office P.O. Box 17 Casa Grande, AZ 85230 Tel: (520) 4219988 Toll Free: (888) 4909552 Fax: (520) 4219899 Electronic Contact: info@acousa.com www.acousa.com July 2013 ACO Polymer Products, Inc. All reasonable care has been taken in compiling this document. All recommendations on the use of ACO products are made without guarantee since the conditions of use are beyond the control of the company. ACO reserves the right to change the product and specifications without notice. Reorder #RD004 0.50 (13mm) 1.00 (25mm) 0.90 (23mm) 0.90 (23mm) Air hole (2 No) (mm) (mm) 2 qty M8 he 30mm long opposite co into concret 0.20 (5mm) Dome height 2 qty M8 he 30mm long opposite co into concre 0.20 (5mm) Dome height Southeast Sales Office 4211 Pleasant Road Fort Mill, SC 29708 Tel: (800) 5434764 (800) 6622377 Fax (803) 8021063 Follow us on Specifications General The surface drainage system shall be ACO INFRASTRUCTURE CurbDrain as manufactured by ACO Polymer Products, Inc. or equal approved. Materials The curb drainage system bodies shall be manufactured from polyester polymer concrete with minimum properties as follows: Compressive strength: 14,000 psi Flexural strength: 4,000 psi Water absorption 0.07% Frost proof Salt proof B117 Salt Spray Test compliant Dilute acid and alkali resistant The nominal clear opening shall be with overall width of. Modular units shall be manufactured with neutral invert and have a minimum wall thickness of at least 0.67 (16mm). Each unit will feature a full radius in the bottom and a male to female interconnecting end profile. A sealant groove provides a 0.25 recess to allow a bead of sealant to be inserted at joints if required. Units shall have cast in anchoring features on the outside wall to ensure maximum mechanical bond to the surrounding bedding material and pavement surface. Each standard unit shall provide 2 front inlets, each providing 8.71 sq. ins. open area. Combined curb & drainage system shall be certified to load class D400 as defined by EN 1433 or able to withstand loadings up to 1,859 psi. Curb shall offer impact resistance as defined by AASHTO Standard Specification for Highway Bridges section 3.14.2 and/or certified to resist loads up to 114lbs dropped vertically from 6 4. Curb and detectable warning device surfaces shall be slip resistant as defined by ASTM C102806 and/or ASTM D204704. Installation The surface drain system shall be installed in accordance with the manufacturer s installation instructions and drawings. An electronic version of the specification clause and installation section drawings are available online at www./resources. html SPEC INFO