Page 01 GLOBE CONTROL VALVE GU Single seated globe valve, top guided GD Double seated globe valve, top and bottom guided Single seated, top guided : 1/2-6 Rating : ANSI Class 150# - 4500# Connections : Flanged, Butt & Socket weld Body material : A216 Gr-WCB, A217 Gr-WC6, WC9, A351 Gr- CF8, Forged steel and alloy steel Trim Material : 304, 316, 420, 630SST, 17-4PH, Hard facing, Alloy steel : - 198...+593 C Seat Leakage : ANSI class IV (option for class V for metal seat and VI for soft seat) Diaphragm and heavy duty : 1/2-16 Rating : ANSI Class 150# - 1500# Connections : Flanged, Butt weld Body material : A216 Gr-WCB, A351 Gr- alloy steel Trim Material : 304, T, Alloy steel : - 198...+593 C Seat Leakage : ANSI class II (option for class V for soft seat) Diaphragm and heavy duty cylinder actuators are available AU Angle Valve GW 3-way Mixing/Diverting globe valve single seated, top guided Single seated, top guided : 3/4-48 Rating : ANSI Class 150# - 4500# Connections : Flanged, Butt & Socket weld Body material : A216 Gr-WCB, A217 Gr-WC6, WC9, A351 Gr- CF8, alloy steel Trim Material : 304, 316, 420, 630SST, 17-4PH, Hard facing, Alloy steel : - 198...+593 C Seat Leakage : ANSI class IV (option for class V for metal seat and VI for soft seat) Diaphragm and heavy duty cylinder actuators are available Single seated, top guided : 1-24 Rating : ANSI Class 150# - 600# Connections : Flanged, Butt & Socket weld Body material : A216 Gr-WCB, A217 Gr-WC6, WC9, A351 Gr- CF8, alloy steel Trim Material : 304, T,, Alloy steel : - 198...+593 C Seat Leakage : ANSI class IV (option for class V for metal seat and VI for soft seat) Diaphragm and heavy duty cylinder actuators are available GB Cage guided globe valve, balanced trims GM Control globe valve with Omega trims High capacity, heavy duty balanced cage guided globe valve : 3/4-18 Rating : ANSI Class 150# - 4500# Connections : Flanged, Butt & Socket weld Body material : A216 Gr-WCB, A217 Gr-WC6, WC9, A351 Gr-CF8, alloy steel Trim Material : 304, 316, 420, 630SST, 17-4PH, Hard facing, Alloy steel : -198...+593 C ANSI seat leakage class : class III for metal seat & metal seal class IV for metal seat & soft seal option for class V for metal seat & soft seal to 4 and class V for metal seat & metal seal (pilot type) and class VI for soft seat & soft seal Diaphragm and heavy duty cylinder actuators are available Available in straight or angle type : 1.5-24 Rating : ANSI Class 150# - 4500# Connections : Flanged, Butt & Socket weld Body material : A216 Gr-WCB, A217 Gr-WC6, WC9, A351 Gr-CF8, Forged steel and alloy steel Trim Material : Solid Carbide Tungsten, Inconel, 316, 420, 630SST, 17-4PH, Hard facing, Alloy steel : -198...+593 C ANSI seat leakage class : class III for metal seat & metal seal class IV for metal seat & soft seal option for class V for metal seat & soft seal to 4 and class V for metal seat & metal seal (pilot type) and class VI for soft seat & soft seal Diaphragm and heavy duty cylinder actuators are available
Page 02 SMART PRODUCTS Input Supply power Supply pressure Communication Neles ND9000 ND9100 - standard, intrinsically safe, ND9200 - explosion proof Intelligent valve controller 4-20 ma or 0-100 % Taken from the 4...20 ma, control signal of fieldbus powered 1.4-8 bar / 20-115 psi -40 C to +85 C -40 C to +185 F HART, Profibus PA, FOUNDA- TION Fieldbus Input Supply power Supply pressure Communication Neles ND9300 ND9300 - stainless steel enclosure, intrinsically safe and explosion proof Intelligent valve controller 4-20 ma or 0-100 % Taken from the 4...20 ma, control signal of fieldbus powered 1.4-8 bar / 20-115 psi -40 C to +85 C -40 F to +185 F HART, Profibus PA, FOUNDA- TION Fieldbus Input Supply pressure Communication Neles ValvGuard VG9000 VG9200 -standard anodised aluminium alloy enclosure, intrinsically safe and explosion proof VG9300 - Stainless Steel enclosure, intrinsically safe and explosion proof Intelligent safety solenoid for FOUNDATION fieldbus and HART. TÜV SIL 3 approved partial stroke testing system for emergency shutdown valves. FOUNDATION fieldbus: FF + 0/24 VDC HART : 0/24 VDC with RCI9H or 4-20 ma 3.0-7.5 bar / 44-185 psi -40 C to +85 C -40 C to +185 F FOUNDA- TION Fieldbus, HART Input Supply pressure Communication Neles SwitchGuard VG9200 -standard anodised aluminium alloy enclosure, intrinsically safe and explosion proof VG9300 - Stainless Steel enclosure, intrinsically safe and explosion proof Intelligent on/off valve controller 0/24 VDC with converter or 4-20 ma 3.0-8.0 bar -40 C to / 44-115 psi +85 C -40 C to +185 F HART
Page 03 3 ACTUATORS Action Input Torque output s B series B1C & B1J Pneumatic rotary cylinder, actuator B1C - double action, B1J - spring return 2.8-10 bar / 40-140 psi 40-100000Nm, 30-73800 ftlbs -40 C to +120 C -40 F to +250 F Manual and hydraulic overdrives, lockout devices, high cycle, fire protection Action Input Torque output s Quadra-Powr X Quadra-Powr Spring diaphragm rotary, actuator Spring return 1.3-7 bar / 20-100 psi 15-1000Nm, 11-750 ft-lbs -30 C to +70 C -20 F to +150 F ANALOG POSITIONER Input Split Ambient temperature Vibration effect Pneumatic positioner NP 700 Pneumatic positioner 0.2-1 bar, 20-200 kpa, 3-15 psig 0.2-0.6 bar 0.6 bar - 1bar 3-9 psig 9-15 psig -40 C to + 90 C / -40 F to +200 F <1% Input Split Ambient temperature Vibration effect Electropneumatic positioner NE 700 Electropneumatic positioner 4-20 ma, 0-20 ma 4-12 ma 12-20 ma -25 C to + 85 C / -15 F to +185 F <1%
Page 04 LIMIT SWITCHES Switch Communication Quartz QX, QN, QG Explosion proof, intrinsically safe, general purpose Inductive proximity, reed, mechanical micro, VCT -40 C to +82 C / -40 F to +176 F FOUNDATION Fieldbus, AS-I Eclipse EN, EG Intrinisically safe, general purpose Inductive proximity VCT -40 C to +82 C / -40 F to +176 F DeviceNet, Modbus, AS-I Solar SR General purpose Inductive proximity, reed, mechanical micro, VCT -40 C to +82 C / -40 F to +176 F FOUNDATION Fieldbus, AS-I Axiom AMI, AX AMI - Intrinsically safe, general purpose with integrated solenoid AX- Explosion proof, with integrated solenoid Inductive proximity, VCT -40 C to +80 C / -40 F to +176 F FOUNDATION Fieldbus, AS-I, HART
Page 05 CONTROL VALVE Design Leakage rate Cv V-port segment valves RA, RE, flanged 25-700/ 1-28 10-40 / 150-300 -50 C to +260 C / -58 F to +500 F WCB CG8M Titanium, Hastelloy C 10x ISO rate D/class IV, ally ISO rate D/class V (min 20 bar p) 0.5-25300 General Reduced Cv trims, Q-Trims Finetrol eccentric plug valves FC, FG Flanged, eccentric rotary plug valve 25-250/ 1-10 10-100 / 150-600 -200 C to +425 C / -320 F to +800 F WCC Class III - IV 7.9-1540 General severe Reduced Cv trims, Q-Trims Cryogenic High performance triple eccentric disc valves L12, L6,, LW, & LG lugged, L1 & L2 double BD flanged 80-2000/ 3-80 10-400 / 150-2500 -200 C to +1400 C / -320 F to +2500 F WCB, CG8M, LCC, 2545SMO, 5A Class III - VI 110-185000 General severe Heat traced, S-Disc Cryogenic live-loaded packing Neles Rotary Globe ZX Flanged, Rotary globe control valve 15-100/ 1/2-4 10-100 / 150-1500 -80 C to +425 C / -110 F to +800 F WCC Class III - IV 0.1-115 General severe Balanced anti cavitation and low noise, differend CV and LIN/EQ% trims Top 5 top entry rotary valves T5 Reduced port, flanged, weldends 25-400/ 1-16 10-100 / 150-600 -200 C to +600 C / -320 F to +1110 F WCB Class V - VI 0.5-15200 Heavy duty Q-Trim, different Cv trims, Cryogenic E series ceramic valves E2 & E6 Reduced port, wafer, lugged 25-200/ 1-8 10-40 / 150-300 -40 C to +425 C / -40 F to +800 F Stainless steel / Magnesia, Partially stabilized Zirconia (Mg-PS2) ISO rate D, Class V 5-2200 Erosive applicati ons Different Cv-trims
Page 06 ON-OFF VALVES X series ball valves Design Leakage Cv rate XA, XB, XC, XU, XT-seat supported, XG, XMtrunnion mounted Full or reduced 25-400/ bore, 1-16 Metal and soft seats 10-100 / 150-600 -200 C to +600 C / -330 F to +1110 F WCB, C5 Class V or VI 105-9300 General Steam jacket, Cryogenic & high temperature, Catalyst handling M series ball Valves Design Leakage Cv rate M1, M2 seat - supported and trunnion mounted Full bore, Metal and 25-400/ soft seats 1-16 10-40 / 150-300 -50 C to + 250 C / -60 F to +480 F CG8M ISO rate D metal seats, bubble tight with soft seats 105-22400 General in P&P industry D series ball valves Design Leakage Cv rate D2C, D2D, D1F Full or reduced port, Stemball contruction D1F: 50-600 10-100 / 2-24 D2: 150-600 100-900 4-36 -200 C to +600 C / -320 F to +1110 F WCB, LCC Class V - VI 4800-192000 Demand -ing application Steam jacket, cryogenic & high temperature, cata-list hand-ling, live-loaded gland packing Design Leakage Cv rate High performance triple eccentric disc valves L12, L6, LW & LG, L90 BW, BK, lugged, double flanged, weld-end 80-2000/ 3-80 10-400 / 150-2500 -200 C to +1000 C / -320 F to +1800 F WCB, CG8M. LCC, 254SMO, 5A Class V - VI 110-185000 General, moderate High tightness, Erosion resistant version, Cryogenic & high temperature, high cycling Top entry
Page 07 ESD VALVES X series ball valves Design Leakage Cv rate XA, XB, XC, XU, XT-seat supported, XG, XMtrunnion mounted Full or reduced 25-400/ bore, 1-16 Metal and soft seats 10-100 / 150-600 -200 C to +600 C / -330 F to +1110 F WCB, C5 Class V - VI 105-9300 High MTBF, SIL 3 certified Cryogenic high temperature D series ball valves Cryogenic, high temperature Design Leakage Cv rate D2C, D2D, D1F Full or reduced port, Stemball contruction D1F: 50-600 10-100 / 2-24 D2: 150-600 100-900 4-36 -196 to +600 C / -320 to +1110 F WCB, LCC Class V - VI 480-192000 High MTBF, SIL 3 certified Design Leakage Cv rate Top entry rotary valves T5 Reduced or full port, flanged. weldends 25-400/ 1-16 10-40 / 150-600 -200 to +600 C / -320 to +1110 F WCB Class V - VI 0.5-15200 High MTBF, SIL 3 certified Cryogenic, high temperature Design Leakage Cv rate High performance triple eccentric disc valves L6, LW & LG, L1 & L2 BW, lugged, double flanged 80-2000/ 3-80 10-400 / 150-2500 -200 to +1000 C / -320 to +1800 F WCB, CG8M. LCC, 254SMO, 5A Class V - VI 110-185000 High (MTBF) L6, LG SIL 3 certified High tightness, Cryogenic, high temp
Page 08 MAPAG and pressure Application High performance switch and control butterfly valves for hydrogen applications BA NPS 2 - NPS 36 CL 300, 600 Carbon Steel, Stainless Steel -10 C to +200 C +14 F to +392 F swing adsorption plants : processing of refinery off-gases; recovery of high pressure hydrogen; up to 2 million cycles and pressure Application Flow control valves BD NPS 2 - NPS 100 CL 150, 300, 600, 900, 1500, 2500 Carbon Steel, Stainless Steel, Duplex SS, Al-Ni-Bronze, Special -40 C to +1450 C -40 F to +2642 F For flow control, sulphur recovery, chemical plants, power plants, ethylene plants, desalination plants and pressure Application Cryogenic flow control valves BE NPS 2 - NPS 100 CL 150, 300, 600, 900, 1500, 2500 Stainless Steel, Aluminium -270 C to +200 C -454 F to +392 F For flow control in cryogenic media, LNG plants, air separation, liquid oxygen, nitrogen, helium and hydrogen, space exploration and pressure Application MAPAG lever valves BH NPS 8 - NPS 100 CL 150 Carbon Steel, Stainless Steel -40 C to +600 C +40 F to +1112 F Valve open at precise pressure differential without use of separate monitoring. Air separation, chemical plants, cement and steel, industry, safety valve
Page 09 MAPAG and pressure Application Cryogenic butterfly valves BK NPS 2 - NPS 100 CL 150, 300, 600, 900 Weld end, Top entry LNG applications NPS 4 - NPS 48 CL 150 Stainless Steel, Aluminium -270 C to +200 C +454 F to +392 F Cryogenic and LNG applications, air separation, nitrogen, helium and hydrogen, space exploration Flow control valves BO NPS 2 - NPS 40 CL 150 Carbon Steel, -10 C to +200 C 14 F to +392 F swing adsorption plants for low pressure oxygen and nitrogen in up to 2 million cycles with opening and closing time <1s Metal seated butterfly valves for high pressure applications BW NPS 2 - NPS 100 CL 150, 300, Carbon Steel, Stainless Steel 600,900, 1500, 2500 Duplex SS Special -40 C to +1450 C -40 F to +2642 F High pressure applications in power plants, ethylene plants, refineries, aero engines, chemical plants, slurries, polymerizing fluids, styrene, acrylic acid, natural gas Double block and bleed with steam purging MAPABLOC NPS 12 - NPS 100 CL 150, 300, Carbon Steel, -40 C to +600 C -40 F to +1112 F Ethylene plants, transfer line valve and decoking valve
Page 10 FLANGED BALL VALVES 7000 Port and 9000 Full Port Flanged Ball Valves 7000 standard port and 9000 full port polymeric-seated flanged ball valves provide high flow capacity for isolation and control applications in industries ranging from chemical and petroleum, to power and pulp and paper. These valves offer long-casting reliable shutoff, and fire-tested to meet the requirements of ANSI/API-607, ISO 10497. Classes 7000 Port Ball Valves 1/2-10 (15-250) 150 300 500 F (260 C) Carbon Steel Alloy 20 Hastelloy C 9000 Full Port Ball Valves 1/2-12 (15-300) 150 300 500 F (260 C) Carbon Steel Alloy 20 Hastelloy C THREADED-END BALL VALVES 4000 Ball Valve 4000 full and standard bore ball valves offer performance and versatility at economical cost. Three end connection are available : threaded, socket-weld, and but weld. The Fire-Tite version is standard. Valves are either CWP or ANSI rated and can be specially prepared for oxiygen or high-vacuum service. Max. 4000 Port Ball Valves 1/2-1 (15-25) 1 1/4-2 (32-50) 2 1/2 (65) 2500 psi (172 bar) 2250 psi (155 bar) 1000 psi (69 bar) 500 F (260 C) Carbon Steel Hastelloy C 4000 Full Port Ball Valves 1/2-3/4 (15-20) 1-1 1/2 (25-40) 2 (50) 2500 psi (172 bar) 2250 psi (155 bar) 1000 psi (69 bar) 500 F (260 C) Carbon Steel Hastelloy C
Page 11 VALUE-LINE BALL VALVES 5H Ball Valve The Value-line 5H 1/4-2 (8-50) threaded ball valve is the right choice for a wide of high-pressure fluid and gas applications where superior performance and low cost are equally important. The series 5H incorporates our unique flexible-lip seat design to provide long-lasting tight shut-off at pressures up to 4500 psi (310 bar) in sizes 1/4-1, and 3000 psi (206 bar) in sizes 1 1/4-2. Max. 5H Ball Valves 1/4-1 (8-25) 1 1/4-2 (32-50) 4500 psi (310 bar) 3000 psi (206 bar) 230 F (110 C) Carbon Steel A-Style Ball Valve The threaded end A-style ball Valve design incorporates standard ports, fire tested performance, actuator mounting pad, and flexible lip seats for extended cycle life. The A-Style is a platform valve similar to the Eliminator. The A-Style Model D maintains the same end to end dimension as the A-Style Model C and can be used as a direct replacement. Max. 5H Ball Valves 1/4-2 (8-50) 2000 psi (138 bar) 500 F (110 C) Carbon Steel Hastelloy C SPECIAL SERVICE BALL VALVES FM-Approved Electric Interlocking Valve (FM Figure 1051) Factory Mutual (FM)-Approved for positive shut-off and position indication for fuel light-off of oil or gas burners. The supervisory cock valves provide fast manual actuation, low torque and reliable tight sealing. FM 1051 Max. 2000 Electric Interlocking Valves 1/2-2 (15-50) 400 psi (27 bar) 250 F (121 C) Carbon Steel 4000 Electric Interlocking Valves 1/2-2 (15-50) 2500 psi (172 bar) 250 F (121 C) Carbon Steel 7000 Electric Interlocking Valves 1/2-6 (15-150) 285 psi (19 bar) Class 150 250 F (121 C) Carbon Steel 740 psi (51 bar) Class 300
Page 12 SPECIAL SERVICE BALL VALVES FM-Approved Safety Shut-Off Valve (FM Figure 1052) FM-approved, these valves provide protection against fire and explosive hazards during light-off and operation of fuelburning equipment. Valves will close rapidly with positive shut-off when electrical signal is interrupted or air pressure is lost. FM 1052 Max. 4000 Safety Shut-off Valves 1/2-2 (15-50) 1100 psi (75 bar) 160 F (71 C) Carbon Steel 7000 Safety Shut-off Valves 3-8 (80-200) 275 psi (19 bar) 160 F (71 C) 9000 Safety Shut-off Valves 2-6 (50-150) 285 psi (19 bar) 160 F (71 C) Carbon Steel FM-Approved Emergency Shut-Off Heat Activated Valves (FM Figure 1075) These valve provide emergency shut-off flammable gases, liquids and toxic fluids where ambient temperatures exceed acceptable limits. FM-approved and available with fusible links for 165 F (73 C) to 200 F (93 C) shut-off. Limit switches are available for remote indication of valve position. FM 1075 Max. 2000 Safety Shut-off Heat Activated Valves 1/2-2 (15-50) 800 psi (55 bar) 500 F (260 C) Carbon Steel 7000 Safety Shut-off Heat Activated Valves 1/2-1 1/2 (15-40) 285 psi (19 bar) Class 150 740 psi (51 bar) Class 300 500 F (260 C) Carbon Steel Eliminator Safety Shut-off Heat Activated Valves 1/2-1 1/4 (15-32) 2000 psi (138 bar) 500 F (260 C) Carbon Steel
Page 13 SPECIAL SERVICE BALL VALVES CSA Approved Gas Shut-Off & Vent Valve (CSA Figure 1057) The Jamesbury Figure 1057 Automatic Safety Gas Valves are CSA approved for providing protection against fire and explosive hazards during light-off and operation of gas-burning equipment. When the electrical signal is interrupted or when there is a loss of air pressure, these gas-line valves operate rapidly to isolate or allow gas flow. The units consist of a valve actuator, limit switch, and solenoid pilot valve, and are approved as an assembly. CSA 1057 Max. 4000 Safety Shut-off Valves 1/2-2 (15-50) 200 psi (14 bar) 125 F (52 C) Carbon Steel 7000 Safety Shut-off Valves 1/2-8 (15-200) 200 psi (14 bar) 125 F (52 C) Carbon Steel 9000 Safety Shut-off Valves 1/2-1 1/2 (15-40) 200 psi (14 bar) 125 F (52 C) Carbon Steel 3-Way Flanged Ball Valves The Jamesbury 3-way ball valves are extremely versatile units of rugged design for diverting or blending flow in a variety of gases or liquids. Bottom ported 3-way ball valves provide a variety of flow paths not commonly found in other 3-way designs. These valves are designed for Class 150 ISO. Max. 3-Way Flanged Ball Valves 2-12 (50-300) 275 psi (19 bar) 300 F (149 C) Carbon Steel 7000 Safety Shut-off Valves 2-8 (50-200) 275 psi (19 bar) 300 F (149 C) Carbon Steel
Page 14 HIGH-PERFORMANCE BUTTERFLY VALVES 815/830 and 860 815/830 and 860 valves are available in wafer and single-flanged lugged designs for dead-end service for ANSI class 150, 300 and 600 pressure class applications. The 815L and 830L series are best suited for applications where exposed bolts are undesirable. All available to meet NACE Mr0175 and MR0103. Body Style Max. Max. Seat ANSI Class 150 815 Butterfly Valves 2 1/2-30 (65-750) 2 1/2-60 (65-1500) 285 psi 19.6 bar 500 F 260 C Carbon Steel Alloy 20 254SMO Hastelloy Teflon Xtreme UHMV ANSI Class 150 F815 Butterfly Valves 3-30 (80-750) 3-60 (80-1500) 285 psi 19.6 bar 500 F 260 C Carbon Steel Alloy 20 254SMO Hastelloy / PTFE / XT ANSI Class 300 830 Butterfly Valves 3-30 (80-750) 3-36 (80-900) 740 psi 51 bar 500 F 260 C Carbon Steel Alloy 20 254SMO Hastelloy Teflon Xtreme UHMV ANSI Class 300 F830 Butterfly Valves 3-30 (80-750) 3-36 (80-90) 740 psi 51 bar 500 F 260 C Carbon Steel Alloy 20 254SMO Hastelloy / PTFE /XT ANSI Class 600 860 Butterfly Valves 3-24 (80-600) 1440 psi 99.3 bar 500 F 260 C Carbon Steel Xtreme ANSI Class 600 F860 Butterfly Valves 3-24 (80-600) 1440 psi 99.3 bar 500 F 260 C Carbon Steel PTFE
Page 15 HIGH-PERFORMANCE BUTTERFLY VALVES 835 835 process-rated ANSI Class 150 high-performance -Sphere butterfly valves are an excellent, cost-effective solution for shut-off pressures up to 100 psi. The 835 provides the same long-lasting tight shut-off capability, excellent flow characteristics and long service life as the fully ANSI-rated 815. Body Style Max. Max. Seat ANSI Class 150 835 Butterfly Valves 30-60 (750-1500) 100 psi 6.9 bar 500 F 260 C Carbon Steel Alloy 20 254SMO Hastelloy Teflon Xtreme ANSI Class 150 F835 Butterfly Valves 30-60 (750-1500) 100 psi 6.9 bar 500 F 260 C Carbon Steel Alloy 20 254SMO Hastelloy / PTFE K815, K830 and K860 K815, K830 and K860 cryogenic designs offer the same features and benefits, and are designed to operate in cryogenic applications such air separation to -320 F. Body Style Max. Max. Seat ANSI Class 150 Cryogenic s K815 Butterfly Valves 3-12 (80-300) 14-30 (350-750) 275 psi 19 bar -320 F to +100 F -198 C to +38 C / PTFE KEL - F ANSI Class 300 Cryogenic s K830 Butterfly Valves 3-12 (80-300) 14-30 (350-750) 720psi 49.6 bar -320 F to +100 F -198 C to +38 C / PTFE KEL - F ANSI Class 600 Cryogenic s K860 Butterfly Valves 3-12 (80-300) 1440 psi 99.3 bar -320 F to +100 F -198 C to +38 C / PTFE
Page 16 BALL VALVES G Trunnion Mounted Ball Valve G series valves are trunnion mounted, polymeric seated ball valve, Which provide bubble-tightness over an extensive of temperatures and pressures. They are available in both full bore and reduced bore designs in a choice of, sizes and pressure which makes them an ideal selection for a variety of applications. This extensive of sizes, styles, pressure and together with conformance to ANSI, API or NACE specifications makes these valves suitable for virtually all moderate temperature oil and gas shut-off applications. The combination of a trunnion mounted ball and an unique spring loaded upstream sealing provides bubbl-tight shut off and low operating torques, even at extremely high shut off pressure. G valves conform to the requirements of / ANSI B16.34 and API 6D / ISO14313. They are manufactured under quality plan that complies with the requirements of API Q1 and ISO 9001. The factory is licensed by API to use the API 6D monogram. FORGED CONSTRUCTION The standard valves use forged steel as their material which eliminate unavoidable defects of castings and assure an uniform and tough structure of the material at full rated working pressure. A wide choice of trim make the valves durable in operation even under severe conditions. Tight Shut Off The unique spring loaded seats with polymer insert provide upstream sealing regardless of flow or pressure direction. These seats provide bubble tight sealing at both high and low differential pressures. Leak testing is performed to the requirements of API 6D and API 598 Fire-Safe and Anti-Static Design The G series valves have been fire-tested in accordance with API 607 edition 4. Report of fire-test witnessed by Lloid are available on request. Upon request the valve can be supplied with an anti-static construction. Corrosion Resistance In addition to increasing the corrosion allowance in thickness, the valve stem, ball and seat retainer of carbon steel are electroless nickel plated as standard per ASTM B733 and B656. A wide of alloys are available for corrosive services. External surfaces of carbon steel valves are paineted. : 2-32 Asme Class : 150, 300, 600, 900, 1500
Page 17 BALL VALVES NO Bill of Material BODY MATERIAL PARTS LIST ASTM A105 ASTM A350 ASTM A182 F316 1 Adapter A105 A350 LF2 A182 F316 2 Body A105 A350 LF2 A182 F316 3 Stud (Body) A193 B7M/B7 A320 L7M A193 B8 4 Nut (Body) A194 2HM/2H A194 7M A194 8 5 Li eye Carbon steel Carbon steel Carbon steel 6 O ring Viton Viton Viton 7 Trunnion bushing CS Lined PTFE CS Lined PTFE SS Lined PTFE 8 Trunnion A105 A350 LF2 A182 F316 9 Screw Carbon steel Carbon steel Carbon steel 10 Gear box 11 Linkage plate Carbon steel Carbon steel Carbon steel 12 Screw Carbon steel Carbon steel Carbon steel 13 Key Carbon steel Carbon steel Carbon steel 14 Compression ring Carbon steel Carbon steel Stainless steel 15 O ring Viton Viton Viton 16 Stem ANSI 4140* ANSI 4140* A182 F316, 17 4PH** 17 Screw ISO 898 1 8.8 A320 L7M Stainless steel 18 Linkage plate Carbon steel Carbon steel Stainless steel 19 Screw Carbon steel Carbon steel Carbon steel 20 Nut Carbon steel Carbon steel Carbon steel 21 Trust gasket CS lined PTFE **** CS lined PTFE **** SS lined PTFE **** 22 Ball A105* A350 LF2* A182 F316, 17 4PH** 23 O ring Viton Viton Viton 24 Bonnet Carbon steel Carbon steel Stainless steel 26 O ring Viton Viton Viton 27 Gasket Graphite Graphite Graphite 28 Spring Inconel X 750 Inconel X 750 Inconel X 750 29 Seat A105*+M+G+R+L+D*** A350 LF2*+M+G+R+L+D*** A182 F316*+M+G+R+L+D*** 30 Injec on fi ng Carbon steel Stainless steel Stainless steel 31 Gland box A105 A350 LF2 A182 F316 32 Screw ISO 898 1 8.8 A320 L7M Stainless steel 33 Plug A320 L7M A320 L7M ASTM A182 F316 34 Injec on fi ng Carbon steel Stainless steel Stainless steel 36 Screw ISO 898 1 8.8 A320 L7M Stainless steel 37 Stud A193 B7M A320 L7M A193 B8 38 Stem bushing CS Lined PTFE CS Lined PTFE SS Lined PTFE 39 Gasket Graphite Graphite Graphite 40 Pin Carbon steel Carbon steel Carbon steel 42 Gasket Graphite Graphite Graphite 43 Seat retainer ASTM A105 ASTM A350 A182 F316 44 Drain fi ng Carbon steel Stainless steel Stainless steel 45 Posi on indicator ANSI 410 ANSI 410 ANSI 410 46 Washer Carbon steel Carbon steel Carbon steel 47 Handle Carbon steel Carbon steel Carbon steel 48 Posi on stop Carbon steel Carbon steel Carbon steel 49 Screw Carbon steel Carbon steel Carbon steel 50 O ring Viton Viton Viton 59 Trunnion plate WCB LCC Stainless steel 60 Thrust gasket CS Lined PTFE CS Lined PTFE CS Lined PTFE 61 Gasket Carbon steel Carbon steel Stainless steel 62 Pin Carbon steel Carbon steel Stainless steel 63 Support leg Carbon steel Carbon steel Carbon steel