MIGHTY MOUSE Cobra The Ultra-Low Profile EMI/RI Plug and ackshell Assembly Innovative shielded low profile right angle connector plug and backshell assemblies reduce clearance requirements without compromising ruggedness or shielding performance. Available in Series 0 double-start, Series 04 QDC push-pull, and Series 05 triple-start, Cobra assemblies provide optimal low-profile cable routing and legendary Mighty Mouse connector performance in a single package. Each Cobra assembly is equipped with a removable rear cover and gasket for easy crimp or solder contact termination of the connector. oth pin and socket versions are available for both crimp and solder terminated versions. Integrated lowprofile backshell is equipped with an EMI/RI shield termination platform and a shrink boot lip. The ultra-lightweight assembly may be clocked in eight different angle orientations for additional flexibility in cable routing. Connectors are equipped with polarization keying to prevent mismating. Glenair Mighty Mouse Cobra connector and backshell assemblies mate with available square flange and jam nut receptacles from each respective connector series. ourteen contact arrangements are available, all with Size #3 contacts from shell size 5 to shell size with 3-0 contacts respectively. Connector shells are aluminum alloy or stainless steel. Space-saving design features one-piece machined and brazed connector shell and right angle backshell for minimum height and optimal EMI performance. Master key clocking enables easy cable entry/ exit routing in eight angles Removable rear cover and gasket provides easy access to end of connector for crimp or solder contact termination or more information contact Glenair at -4-6000 or visit our website at www.glenair.com
MIGHTY MOUSE Cobra TECHNICAL SPECIICATIONS 05-06 triple-start with self-locking coupling nut, exploded view How To Order Mighty Mouse Cobra Plug Connector and ackshell Assemblies Sample Part Number 0-069-6 ZNU - P A 05 Thread Master Key Connector Series and Mighty Mouse Cobra asic Part Number 0-069-6 Double-Start self-locking plug with ratchet mechanism (the clicker) 04-066-06 QDC Push-Pull plug 05-06-6 Triple-Start plug with ratcheting anti-decoupling mechanism Material/inish M, MT, N, ZNU, Z - See Table I Shell Size - Contact Arrangement See Table V - A: 0-069 : 04-066 C: 05-06 Contact Style Polarization Key Position Cable Exit Direction Cable Entry Size A = Pin, solder = Socket, solder P = Pin, Crimp S = Socket, crimp A,, C, D, E, - See Table III,, 3, 4, 5, 6,, - See Table IV See Table VI ØC Specifications Current Rating: #3 5 Amps Test Voltage (DWV) #3: 500 VAC Sea Level Insulation Resistance: 5000 megohms minimum Contact Resistance: 3 millivolt drop at 5 Amp test current Mating Cycles Series 0 and 04: 000; Series 05: 500 Operating Temperature: -55 C. to +50 C. Shielding Effectiveness: 50 d min from 0MHz to 00MHz. Magnetic Permeability:.0µ Vibration: 3g / Shock: 300g Immersion, mated: meter water immersion for hour Materials/finish Contacts: Copper alloy, gold plated ackshell Housing and Lid: Aluminum or Stainless Steel ackshell Sealing Gasket and Interfacial Seal: luorosilicone Screws: 300 Series Stainless Steel Insulator: LCP Notes Rear insulator grommet not supplied. Cobra plug connectors mate with respective series receptacles with same polarization and opposite contact gender. Hand crimp tool: P/N 09-05. Positioner for hand tool: P/N 09-005. Insertion/extraction tool P/N 09-0. Crimp barrel accommodates, 4, 6 and gage wire. All Cobra plugs equipped with Size #3 contacts. Table I: Shell Material/inish Symbol Material inish M Electroless Nickel (RoHS) N Aluminum Cad/O.D. over Electroless Nickel MT Alloy Nickel-PTE (RoHS) ZNU lack Zinc Nickel over Electroless Nickel Z Stainless Steel Passivate Table III: Key Positions Table IV: Exit Direction Table VI - Cable Entry Direction C Code Entry Size 0 0.5 45 03. 3 90 04.50 A 4 5 05.3 5 0 06.35 6 5 0.43 0 35 0.500 09.563 A C A 50.65 5 Master.6 C 95 30 Key.50 D 40 5 *. E 5 5 4*.5 95 5*.93 6*.000 Direction Shown *.063 * Entry codes - not available for Series 04 Cobra Table V - Shell Size/Contact Arrangements A: 0-069 : 04-066 C: 05-06 Shell Size Contact Arrangement Max Entry Shell Size Contact Arrangement Max Entry Shell Size Contact Arrangement Max Entry 5 5-3 03 5 5-3 03-4, -6, - 04 6 6-4, 6-6, 6-04 6 6-4, 6-6, 6-04 9 9-05 - 05-05 - 06-06 - 06-9 0 9 9-9 0 9 9-9 0-6 0-6 0-6 0-3 09-3 09-3 5 5-3 -3 4 4-55 -55 6 6-55 9 9-5 -5-0 5 9 9-0 5 3 3-0 -0
THIS COPYRIGHTED DOCUMENT IS THE PROPERTY O AND IS URNISHED ON THE CONDITION THAT IT IS NOT TO E DISCLOSED, REPRODUCED IN WHOLE OR IN PART, OR USED TO SOLICIT QUOTATIONS ROM COMPETITIVE SOURCES, OR USED OR MANUACTURE Y ANYONE OTHER THAN WITHOUT WRITTEN PERMISSION ROM THE INORMATION HEREIN HAS EEN DEVELOPED AT GLENAIR'S EXPENSE AND MAY E USED OR ENGINEERING EVALUATION AND INCORPORATION INTO TECHNICAL SPECIICATIONS AND OTHER DOCUMENTS WHICH SPECIY PROCUREMENT O PRODUCTS ROM TALE I - MATERIAL / INISH CLASS CLASS SHELL MATERIAL INISH M ALUMINUM ALLOY ELECTROLESS NICKEL (RoHS) MT ALUMINUM ALLOY NICKEL-PTE (RoHS) N ALUMINUM ALLOY ZNU ALUMINUM ALLOY OLIVE DRA CADMIUM OVER ELECTROLESS NICKEL LACK ZINC-NICKEL OVER ELECTROLESS NICKEL (RoHS) Z STAINLESS STEEL PASSIVATE (RoHS) CONTACT GLENAIR OR ADDITIONAL INISHES D MAX ASSEMLED 0-069 REV DESCRIPTION DATE A PRODUCTION RELEASE /09/ REVISED PER DCN #4530 0// THREAD REAR INSULATOR GROMMET NOT SUPPLIED øa GASKET COVER NOTES: UNLESS OTHERWISE SPECIIED. ASSEMLY TO E IDENTIIED WITH GLENAIR'S NAME, PART NUMER, AND DATE CODE, SPACE PERMITTING.. MATERIAL / INISH: PLUG ARREL, COUPLING NUT, HOUSING, COVER - ALUMINUM ALLOY OR STAINLESS STEEL / SEE TALE I INSULATOR - LCP / NONE INTERACIAL SEAL, GASKET - LUOROSILICONE / NONE CONTACT - COPPER ALLOY / GOLD PLATE PER ASTM 4, TYPE II, CODE C, CLASS.5 (.00005 MIN THK), OVER A SUITALE UNDERPLATE CONTACT RETENTION CLIP - ERYLLIUM COPPER ALLOY / NONE HARDWARE - STAINLESS STEEL / PASSIVATE OR LACK OXIDE RETAINING WIRE - TORLON / NONE DETENT SPRING / RIVET - STAINLESS STEEL / PASSIVATE 3. CONTACTS ARE SIZE 3. 4. CONSULT ACTORY OR ADDITIONAL CONTACT ARRANGEMENTS AND/OR SHELL ORIENTATIONS. E MAX ASSEMLED ENTRY SIZE ACE VIEW O PLUG AS VIEWED ROM ENGAGING END (-PA SHOWN) 5. CRIMP ARREL ACCOMMODATES, 4, 6, AND GAGE WIRE. 6. CRIMP TOOL DATA: A. HAND CRIMP TOOL: GLENAIR PART NO. 09-05.. POSITIONER OR HAND TOOL: GLENAIR PART NO. 09-005. C. INSERTION/EXTRACTION TOOL: GLENAIR PART NO. 09-0.. CONTACT ARRANGEMENT, CONTACT GENDER, POSITIONS, AND SHELL ORIENTATION SHOWN ARE OR REERENCE ONLY.. THIS CONNECTOR MATES WITH ALL QUICK COUPLING, HIGH DENSITY CONNECTORS WITH SAME POLARIZATION AND OPPOSITE CONTACT GENDER (0-003 THROUGH 0-006 AND 0-009 THROUGH 0-0). 9. REAR INSULATOR GROMMET NOT SUPPLIED. UNLESS OTHERWISE SPECIIED RACTIONS ± /6 ANGLES ± GS 03/05/ 03/05/ 03/05/ 03/05/ AIR WAY - GLENDALE - CALIORNIA 9 CODE IDENT. NO. SIZE 0634 A SERIES 0, RATCHETING, CORA STYLE DRAWING NO. / C50 P/C 0 03/05/ N.A. N.A. 0-069 SCALE WEIGHT SHEET O
THIS COPYRIGHTED DOCUMENT IS THE PROPERTY O AND IS URNISHED ON THE CONDITION THAT IT IS NOT TO E DISCLOSED, REPRODUCED IN WHOLE OR IN PART, OR USED TO SOLICIT QUOTATIONS ROM COMPETITIVE SOURCES, OR USED OR MANUACTURE Y ANYONE OTHER THAN WITHOUT WRITTEN PERMISSION ROM THE INORMATION HEREIN HAS EEN DEVELOPED AT GLENAIR'S EXPENSE AND MAY E USED OR ENGINEERING EVALUATION AND INCORPORATION INTO TECHNICAL SPECIICATIONS AND OTHER DOCUMENTS WHICH SPECIY PROCUREMENT O PRODUCTS ROM SHELL SIZE 5 6 9 6 9 A øa.65 [6.5].65 [6.5].69 [.5].9 [0.].3 [.].9 [3.4]. [.9].34 [34.0].45 [36.].50 [3.].65 [4.9] POSITION THREAD.35-.05P-.L-.350-.05P-.L-.435-.05P-.L-.5000-.05P-.L-.565-.05P-.L-.650-.05P-.L-.65-.05P-.L-.5-.P-.L-.0000-.P-.L-.065-.P-.L-.5-.P-.L-.35-.P-.L- TALE III - POSITION POSITION A A (NORMAL) 50 5 C 95 30 D 40 5 E 5 5 95 TALE II - DIMENSIONAL DATA D E.4 [.3].3 [.]. [30.].6 [.].34 [.6].4 [3.5]. [.4].39 [9.9]. [3.5].9 [.6].4 [.].3 [33.3].9 [3.4].45 [.4].34 [34.0].96 [4.4].4 [.].3 [34.]. [.].5 [.].4 [3.6]. [3.5].63 [6.0]. [45.] G.40 [35.6].4 [36.].44 [36.6].45 [36.].4 [3.6].5 [3.6].0 [45.].9 [4.] REAR-MOUNTED SQUARE LANGE H.3 [3.].5 [3.]. [3.3]. [3.5].3 [33.3].35 [34.3].63 [4.4]. [45.].500 [.0].560 [4.].650 [6.5]. [.03].0 [9.56].35 [.].950 [4.].0 [9.9] SEE SHEET O MAX ENTRY 03 04 05 06 0 0 09 5 TALE IV-EXIT DIRECTION DIRECTION C 0 45 3 90 4 5 5 0 6 5 0 35 TALE VI-CALE ENTRY CODE ENTRY SIZE 0.5 03. 04.50 05.3 06.35 0.43 0.500 09.563.65.6.50. 4.5 5.93 6.000.063 C 0-069 (POSITION A SHOWN) PART NUMER DEVELOPMENT EXAMPLE: 0-069 -6 ZNU - P A 05 SHOWN INSTALLED H MAX.060 [.5] G MAX CONNECTOR SERIES SHELL STYLE -6 = SEL-LOCKING PLUG WITH RATCHET MECHANISM (THE "CLICKER") CLASS (SEE TALE I) SHELL SIZE - CONTACT ARRANGEMENT (SEE TALE V) SQUARE LANGE AM NUT CONTACT STYLE A = PIN, SOLDER = SOCKET, SOLDER P = PIN, CRIMP S = SOCKET, CRIMP A THROUGH (SEE TALE III) POSITION THROUGH (SEE TALE IV) CALE EXIT DIRECTION CALE ENTRY SIZE (SEE TALE VI) TALE V - AVAILALE ARRANGEMENTS SHELL SIZE CONTACT ARRANGEMENT* 5 5-3 6 6-4, 6-6, 6- - - 9 9-9 -6-3 -3 6 6-55 -5 9 9-0 -0 *: # OLLOWING DASH = # O CONTACTS UNLESS OTHERWISE SPECIIED RACTIONS ± /6 ANGLES ± / C50 P/C AIR WAY - GLENDALE - CALIORNIA 9 CORA STYLE CODE IDENT. NO. SIZE DRAWING NO. 03/05/ 0634 A 0 03/05/ SCALE N.A. WEIGHT N.A. SHEET GS 03/05/ 03/05/ 03/05/ CALE EXIT DIRECTION (DIRECTION SHOWN) SERIES 0, RATCHETING, O 0-069
THIS COPYRIGHTED DOCUMENT IS THE PROPERTY O AND IS URNISHED ON THE CONDITION THAT IT IS NOT TO E DISCLOSED, REPRODUCED IN WHOLE OR IN PART, OR USED TO SOLICIT QUOTATIONS ROM COMPETITIVE SOURCES, OR USED OR MANUACTURE Y ANYONE OTHER THAN WITHOUT WRITTEN PERMISSION ROM THE INORMATION HEREIN HAS EEN DEVELOPED AT GLENAIR'S EXPENSE AND MAY E USED OR ENGINEERING EVALUATION AND INCORPORATION INTO TECHNICAL SPECIICATIONS AND OTHER DOCUMENTS WHICH SPECIY PROCUREMENT O PRODUCTS ROM CLASS M MT N ZNU Z REV DESCRIPTION DATE A PRODUCTION RELEASE 0// TALE I - MATERIAL / INISH CLASS REVISED PER DCN #4530 0// SHELL MATERIAL INISH ALUMINUM ALLOY ELECTROLESS NICKEL (RoHS) ALUMINUM ALLOY NICKEL-PTE (RoHS) OLIVE DRA CADMIUM OVER ALUMINUM ALLOY ELECTROLESS NICKEL D MAX LACK ZINC-NICKEL OVER A ALUMINUM ALLOY ASSEMLED ELECTROLESS NICKEL (RoHS) STAINLESS STEEL PASSIVATE (RoHS) CONTACT GLENAIR OR ADDITIONAL INISHES.60 [5.] 04-066 REAR INSULATOR GROMMET NOT SUPPLIED GASKET COVER NOTES: UNLESS OTHERWISE SPECIIED MAX. ASSEMLY TO E IDENTIIED WITH GLENAIR'S NAME, PART NUMER, AND DATE CODE, SPACE PERMITTING.. MATERIAL / INISH: PLUG ARREL, HOUSING, COVER - ALUMINUM ALLOY OR STAINLESS STEEL / SEE TALE I INSULATOR - LCP / NONE INTERACIAL SEAL, GASKET - LUOROSILICONE / NONE CONTACT - COPPER ALLOY / GOLD PLATE PER ASTM 4, TYPE II, CODE C, CLASS.5 (.00005 MIN THK), OVER A SUITALE UNDERPLATE CONTACT RETENTION CLIP - ERYLLIUM COPPER ALLOY / NONE HARDWARE - STAINLESS STEEL / PASSIVATE OR LACK OXIDE 3. CONTACTS ARE SIZE 3. 4. CONSULT ACTORY OR ADDITIONAL CONTACT ARRANGEMENTS AND/OR SHELL ORIENTATIONS. E ASSEMLED ENTRY SIZE ACE VIEW O PLUG AS VIEWED ROM ENGAGING END (-PA SHOWN) 5. CRIMP ARREL ACCOMMODATES, 4, 6, AND GAGE WIRE. 6. CRIMP TOOL DATA: A. HAND CRIMP TOOL: GLENAIR PART NO. 09-05.. POSITIONER OR HAND TOOL: GLENAIR PART NO. 09-005. C. INSERTION/EXTRACTION TOOL: GLENAIR PART NO. 09-0.. CONTACT ARRANGEMENT, CONTACT GENDER, POSITIONS, AND SHELL ORIENTATION SHOWN ARE OR REERENCE ONLY.. THIS CONNECTOR MATES WITH ALL QUICK-DISCONNECT, HIGH DENSITY CONNECTORS WITH SAME POLARIZATION AND OPPOSITE CONTACT GENDER (04-003 THROUGH 04-006, 04-009, 04-00, AND 04-0). 9. REAR INSULATOR GROMMET NOT SUPPLIED. UNLESS OTHERWISE SPECIIED RACTIONS ± /6 ANGLES ± / C30 P/C AIR WAY - GLENDALE - CALIORNIA 9 CORA STYLE CODE IDENT. NO. SIZE DRAWING NO. 0// 0634 A 0 0// SCALE N.A. WEIGHT N.A. SHEET MT 0// 0// 0// SERIES 04, O 04-066
THIS COPYRIGHTED DOCUMENT IS THE PROPERTY O AND IS URNISHED ON THE CONDITION THAT IT IS NOT TO E DISCLOSED, REPRODUCED IN WHOLE OR IN PART, OR USED TO SOLICIT QUOTATIONS ROM COMPETITIVE SOURCES, OR USED OR MANUACTURE Y ANYONE OTHER THAN WITHOUT WRITTEN PERMISSION ROM THE INORMATION HEREIN HAS EEN DEVELOPED AT GLENAIR'S EXPENSE AND MAY E USED OR ENGINEERING EVALUATION AND INCORPORATION INTO TECHNICAL SPECIICATIONS AND OTHER DOCUMENTS WHICH SPECIY PROCUREMENT O PRODUCTS ROM TALE II - DIMENSIONAL DATA SHELL SIZE øa D E G H MAX ENTRY 5.6 [.0]. [6.9].03 [6.].9 [.4].4 [3.5].3 [33.4].6 [9.5].500 [.] 03 6.5 [9.].30 [.6].0 [.4].3 [.9]. [3.3].36 [34.5]. [30.].560 [4.] 04. [.4].34 [.6].0 [30.5].36 [9.].3 [33.3].4 [3.3].3 [33.5].650 [6.5] 05.9 [4.6].3 [9.].4 [3.5].39 [9.9].34 [34.0].5 [3.4].36 [34.5]. [.0] 06 9.06 [6.9].4 [.4].30 [33.0].4 [.].3 [34.].5 [40.].43 [36.3].0 [9.6] 0.5 [9.].44 [.].35 [34.3].45 [.4].40 [35.6].6 [4.].4 [3.3].35 [.] 0.33 [33.].50 [.].44 [36.6].49 [.4].5 [3.4]. [43.4].56 [39.6].950 [4.] 4.6 ([4.] ).3 ([.0] ) SEE SHEET O 04-066 TALE VI-CALE ENTRY CODE ENTRY SIZE 0.5 03. 04.50 05.3 06.35 0.43 0.500 09.563.65.6.50 A POSITION (POSITION A SHOWN) PART NUMER DEVELOPMENT TALE III - POSITION POSITION A A (NORMAL) 50 5 C 95 30 D 40 5 E 5 5 95 H MAX SHOWN INSTALLED RONT-MOUNTED SHOWN INSTALLED G MAX REAR-MOUNTED TALE IV-EXIT DIRECTION DIRECTION C 0 45 3 90 4 5 5 0 6 5 0 35 C EXAMPLE: 04-066 -06 ZNU - P A 05 CONNECTOR SERIES SHELL STYLE -06 = PLUG CLASS (SEE TALE I) SHELL SIZE - CONTACT ARRANGEMENT (SEE TALE V) CONTACT STYLE A = PIN, SOLDER = SOCKET, SOLDER P = PIN, CRIMP S = SOCKET, CRIMP POSITION A THROUGH (SEE TALE III) OMIT OR SINGLE CALE EXIT DIRECTION THROUGH (SEE TALE IV) CALE ENTRY SIZE (SEE TALE VI) TALE V - AVAILALE ARRANGEMENTS SHELL SIZE CONTACT ARRANGEMENT* 5 5-3 6 6-4, 6-6, 6- - - 9 9-9 -6-3 4 4-55 *: # OLLOWING DASH = # O CONTACTS RONT-MOUNTED UNLESS OTHERWISE SPECIIED RACTIONS ± /6 ANGLES ± MT 0// 0// 0// 0// REAR-MOUNTED CODE IDENT. NO. SIZE 0634 A SERIES 04, CORA STYLE / C30 P/C 0 0// N.A. N.A. CALE EXIT DIRECTION (DIRECTION SHOWN) AIR WAY - GLENDALE - CALIORNIA 9 DRAWING NO. 04-066 SCALE WEIGHT SHEET O
THIS COPYRIGHTED DOCUMENT IS THE PROPERTY O AND IS URNISHED ON THE CONDITION THAT IT IS NOT TO E DISCLOSED, REPRODUCED IN WHOLE OR IN PART, OR USED TO SOLICIT QUOTATIONS ROM COMPETITIVE SOURCES, OR USED OR MANUACTURE Y ANYONE OTHER THAN WITHOUT WRITTEN PERMISSION ROM THE INORMATION HEREIN HAS EEN DEVELOPED AT GLENAIR'S EXPENSE AND MAY E USED OR ENGINEERING EVALUATION AND INCORPORATION INTO TECHNICAL SPECIICATIONS AND OTHER DOCUMENTS WHICH SPECIY PROCUREMENT O PRODUCTS ROM TALE I - MATERIAL / INISH CLASS CLASS SHELL MATERIAL INISH M ALUMINUM ALLOY ELECTROLESS NICKEL (RoHS) MT ALUMINUM ALLOY NICKEL-PTE (RoHS) N ALUMINUM ALLOY ZNU ALUMINUM ALLOY OLIVE DRA CADMIUM OVER ELECTROLESS NICKEL LACK ZINC-NICKEL OVER ELECTROLESS NICKEL (RoHS) Z STAINLESS STEEL PASSIVATE (RoHS) CONTACT GLENAIR OR ADDITIONAL INISHES D MAX ASSEMLED 05-06 REV DESCRIPTION DATE A PRODUCTION RELEASE 0/9/ REVISED PER DCN #4530 0// THREAD REAR INSULATOR GROMMET NOT SUPPLIED øa GASKET NOTES: UNLESS OTHERWISE SPECIIED. ASSEMLY TO E IDENTIIED WITH GLENAIR'S NAME, PART NUMER, AND DATE CODE, SPACE PERMITTING. COVER. MATERIAL / INISH: PLUG ARREL, COUPLING NUT, HOUSING, COVER - ALUMINUM ALLOY OR STAINLESS STEEL / SEE TALE I INSULATOR - LCP / NONE. INTERACIAL SEAL, GASKET - LUOROSILICONE / NONE CONTACT - COPPER ALLOY / GOLD PLATE PER ASTM 4, TYPE II, CODE C, CLASS.5 (.00005 MIN THK), OVER A SUITALE UNDERPLATE CONTACT RETENTION CLIP - ERYLLIUM COPPER ALLOY / NONE HARDWARE - STAINLESS STEEL / PASSIVATE OR LACK OXIDE RETAINING WIRE - TORLON / NONE DETENT SPRING, RIVET - STAINLESS STEEL / PASSIVATE EMI GROUND SPRING - ERYLLIUM COPPER / ELECTROLESS NICKEL 3. CONTACTS ARE SIZE 3. E MAX ASSEMLED ENTRY SIZE 4. CONSULT ACTORY OR ADDITIONAL CONTACT ARRANGEMENTS AND/OR SHELL ORIENTATIONS. 5. CRIMP ARREL ACCOMMODATES, 4, 6, AND GAGE WIRE. ACE VIEW O PLUG AS VIEWED ROM ENGAGING END (-PA SHOWN) 6. CRIMP TOOL DATA: A. HAND CRIMP TOOL: GLENAIR PART NO. 09-05.. POSITIONER OR HAND TOOL: GLENAIR PART NO. 09-005. C. INSERTION/EXTRACTION TOOL: GLENAIR PART NO. 09-0.. CONTACT ARRANGEMENT, CONTACT GENDER, POSITIONS, AND SHELL ORIENTATION SHOWN ARE OR REERENCE ONLY.. THIS CONNECTOR MATES WITH ALL QUICK COUPLING, HIGH DENSITY CONNECTORS WITH SAME POLARIZATION AND OPPOSITE CONTACT GENDER (05-003 THROUGH 05-006 AND 05-0). 9. REAR INSULATOR GROMMET NOT SUPPLIED. UNLESS OTHERWISE SPECIIED RACTIONS ± /6 ANGLES ± GS 0/9/ 0/9/ 0/9/ 0// AIR WAY - GLENDALE - CALIORNIA 9 CODE IDENT. NO. SIZE 0634 A SERIES 05 STYLE RATCHETING CORA DRAWING NO. / C9 P/C 0 0// N.A. N.A. 05-06 SCALE WEIGHT SHEET O
THIS COPYRIGHTED DOCUMENT IS THE PROPERTY O AND IS URNISHED ON THE CONDITION THAT IT IS NOT TO E DISCLOSED, REPRODUCED IN WHOLE OR IN PART, OR USED TO SOLICIT QUOTATIONS ROM COMPETITIVE SOURCES, OR USED OR MANUACTURE Y ANYONE OTHER THAN WITHOUT WRITTEN PERMISSION ROM THE INORMATION HEREIN HAS EEN DEVELOPED AT GLENAIR'S EXPENSE AND MAY E USED OR ENGINEERING EVALUATION AND INCORPORATION INTO TECHNICAL SPECIICATIONS AND OTHER DOCUMENTS WHICH SPECIY PROCUREMENT O PRODUCTS ROM SHELL SIZE 9 5 9 3 A øa.65 [5.].9 [0.].3 [.].9 [3.4].9 [4.9].05 [6.]. [.9].9 [3.].3 [33.3].45 [36.].56 [39.6] POSITION (POSITION A SHOWN) THREAD.5000-.P-.3L-TS-.565-.P-.3L-TS-.650-.P-.3L-TS-.65-.P-.3L-TS-.500-.P-.3L-TS-.5-.P-.3L-TS-.935-.P-.3L-TS-.50-.P-.3L-TS-.5-.P-.3L-TS-.35-.P-.3L-TS-.435-.P-.3L-TS- TALE III - POSITION POSITION A A (NORMAL) 50 5 C 95 30 D 40 5 E 5 5 95 TALE II - DIMENSIONAL DATA D E.0 [5.9].34 [.6].4 [3.5].03 [6.].39 [9.9]. [3.5].05 [6.].4 [.].3 [33.3].0 [.4].45 [.4].34 [34.0]. [.].4 [.].3 [34.]. [9.].5 [.].4 [3.6].3 [33.5].63 [6.0]. [45.] SHOWN INSTALLED G.6 [44.]. [45.0].9 [45.5]. [46.].5 [4.0].9 [4.5].06 [5.3] REAR-MOUNTED SQUARE LANGE H.6 [4.].63 [4.4].65 [4.9].6 [4.]. [43.4]. [45.0].9 [4.] SEE SHEET O.560 [4.].650 [6.5]. [.03].0 [9.56].35 [.].950 [4.].0 [9.9] TALE IV-EXIT DIRECTION DIRECTION C 0 45 3 90 4 5 5 0 6 5 0 35 MAX ENTRY 04 05 06 0 0 09 5 TALE VI-CALE ENTRY CODE ENTRY SIZE 0.5 03. 04.50 05.3 06.35 0.43 0.500 09.563.65.6.50. 4.5 5.93 6.000.063 C 05-06 PART NUMER DEVELOPMENT H MAX.060 G MAX [.5] EXAMPLE: 05-06 -6 ZNU 9- P A 05 CONNECTOR SERIES SHELL STYLE -6 = PLUG CONNECTOR WITH RATCHETING ANTI-DECOUPLING MECHANISM CLASS (SEE TALE I) SHELL SIZE - CONTACT ARRANGEMENT (SEE TALE V) SQUARE LANGE AM NUT CONTACT STYLE A = PIN, SOLDER = SOCKET, SOLDER P = PIN, CRIMP S = SOCKET, CRIMP A THROUGH (SEE TALE III) POSITION THROUGH (SEE TALE IV) CALE EXIT DIRECTION CALE ENTRY SIZE (SEE TALE VI) TALE V - AVAILALE ARRANGEMENTS SHELL SIZE CONTACT ARRANGEMENT* -4, -6, - 9 9- - -9-6 -3 5 5-3 -55 9 9-5 -0 3 3-0 *: # OLLOWING DASH = # O CONTACTS UNLESS OTHERWISE SPECIIED RACTIONS ± /6 ANGLES ± / C9 P/C AIR WAY - GLENDALE - CALIORNIA 9 RATCHETING CORA CODE IDENT. NO. SIZE DRAWING NO. 0// 0634 A 0 0// SCALE N.A. WEIGHT N.A. SHEET GS 0/9/ 0/9/ 0/9/ CALE EXIT DIRECTION (DIRECTION SHOWN) SERIES 05 STYLE O 05-06