and actuators subsea
100 C 55 M 20 Y 0 K 0 C 0 M 0 Y 80 K subsea 0 C 0 M 0 Y 0 K 0 C 0 M 0 Y 25 K 03 30 years plus of leadership and innovation in subsea PetrolValves has been a leader in the manufacture of Subsea since the early 1970s, with our first installations in the North Sea. Today, the Company s and actuators are installed worldwide in a very large number of Subsea pipelines and production modules. This is a testament to the level of confidence that major End Users and EPCs have in PetrolValves. As line pressures continue to rise and the water depths extend beyond 10,000ft /3000 meters, PetrolValves continues to improve product reliability to provide customized solution for each unique operational requirement. 16 Class 1500 valve supplied in 1978 design fe&cfd PetrolValves Engineering uses the most sophisticated and advanced Numerical Simulation Tools. Both Elastic and Elastic-Plastic FE simulations are utilized to optimize performances and improve reliability in operation under any predictable loading conditions including internal & external pressure, mechanical loads and thermal gradients. Extensive use of CFD is made to verify valve fluid-dynamic performance. The experienced PetrolValves Engineering Team can develop customized solutions to suit any specific operational requirement up through API 20 K.
on/off & control subsea product qualification PetrolValves has an extremely large record of previous qualifications successfully performed : PR2 Design Validation Test according to API 6A /ISO 10423 Annex F Endurance Test According to API 17D Sand slurry test according to API 6A/ISO 10423 ANNEX I Class II Sand slurry test according to API 6AV1 Hyperbaric Test according to API 17D Annex L A number of customized qualification Procedures materials valve type available body available obturator available seat ball gate Cast or Forged: LTCS; Super Forged: LTCS or Low Alloy Steel; Inconel Cladded Cast or Cast or Forged: LTCS; Inconel cladded Inconel cladded Cast or 01 seals 2 to 48 30 1 13/16 to 30 1 13/16 to 20 1 13/16 to 12 BODY SEALS All primary body gaskets are bi directional metal-to-metal to provide tight seal both toward and from environment. Typical arrangement also include a secondary environmental soft seal which provides an additional barrier to seawater ingress into the valve. 2 to 48 32 1 13/16 to 34 " 1 13/16 to 24 " 1 13/16 to 8 " 2 to 24 18 1 13/16 to 20 1 13/16 to 16 1 13/16 to 6 STEM SEALS PetrolValves (proprietary design) subsea stem gasket is qualified up to 12,500 psi internal pressure and 3000 m water depth. In addition, PV s patented Infinity Seal is available as an option. Through the employment of this metal to metal stem gasket, the guaranteed operational life can be extended. 2 to 42 30 1 13/16 to 30 1 13/16 to 24 1 13/16 to 12 2 to 48 30 1 13/16 to 30 1 13/16 to 24 1 13/16 to 12 HP SLAB GATE ALVES EXPANDING GATE VALVES leak test port environmental seal primary metal body gasket environmental gasket redundant stem gasket (available upon request) double thermoplastic gasket spring to recover gasket wear
100 C 55 M 20 Y 0 K 0 C 0 M 0 Y 80 K subsea 02 valve type ball gate available body Cast or Forged: LTCS; No internal valve Cast part or can Forged: become LTCS; Inconel stuck: cladded valve provides tight seal and full Forged: operability Low Alloy even Steel; with Inconel fluids cladded that can solidify or crystallize Cast or Super available obturator hp metal floating ball () Forged: LTCS or Low Alloy Steel; Inconel Cladded Cast or The valve and all the components, including gaskets, are available range designed for deep subsea installation&operation * Seat and ball sealing surfaces match under low contact 2 to 48 30 1 stress and self-cleaning 13/16 to 30 1 operation 13/16 to 20 1 13/16 to 12 Superior API resistance 6DSS to abrasion and API wear 6A / 17D 2 to 48 32 1 13/16 to 34 " 1 13/16 to 24 " 1 13/16 to 8 " 2 to 24 18 1 13/16 to 20 1 13/16 to 16 1 13/16 to 6 available seat HP HEAVY DUTY service 2 to 42 30 1 13/16 to 30 1 13/16 to 24 1 13/16 to 12 SLAB GATE ALVES 2 to 48 30 1 13/16 to 30 1 13/16 to 24 1 13/16 to 12 EXPANDING GATE VALVES 2 to 48 30 1 13/16 to 30 1 13/16 to 20 1 13/16 to 8 SWING CHECK
on/off & control subsea trunnion supported ball PetrolValves trunnion mounted, full or reduced bore, metal seated. The valve and all the components, including gaskets, are the result of extensive Design and R&D programs aimed to verify their suitability for deep Subsea installation & operation The valve internal profile is shaped to minimize turbulence and to avoid any potential obstacle for the passage of pigs The valve body is designed to accommodate all predictable loads, including induced loads during installation top entry end entry 03 valve type ball gate Seat & ball flexibility/rigidity is designed to accommodate mutual available elastic displacements available body Standard construction Forged: includes LTCS or Low primary Alloy Steel; metal-to-metal, Inconel Cladded bi-directional body-to-environment seal Cast or Forged: LTCS; Super obturator Cast or Large variety of stem seal options available, including Infinity metal stem seal (PetrolValves patent) Cast or Forged: LTCS; Inconel cladded Inconel cladded Both Self-Relieving Cast (SPE) or Forged: and Double Duplex, SuperDuplex, Piston Effect(DPE) Ni Alloy seat designs are HardFacing: available Stellite Double isolation construction (two trims in one unique body) is also available 2 to 48 30 1 13/16 to 30 1 13/16 to 20 1 13/16 to 12 2 to 48 32 1 13/16 to 34 " 1 13/16 to 24 " 1 13/16 to 8 " available seat low operating torque 2 to 24 18 1 13/16 to 20 1 13/16 to 16 1 13/16 to 6 HP
100 C 55 M 20 Y 0 K 0 C 0 M 0 Y 80 K subsea 04 valve type ball gate slab gate available body Cast or Forged: LTCS; Super Metal-to-metal seat seal available obturator Forged: LTCS or Low Alloy Steel; Inconel Cladded Cast or Primary metal seat-to-body seal Cast or Forged: LTCS; Inconel cladded Inconel cladded Cast or Standard construction includes metal-to-metal, bi - directional body-to-environment seal Large variety of stem seals available, including Infinity metal stem seal (PetrolValves available range patent) * 150 Proven to 1500 design 2500 for extreme 2K to deepwater 5K 10K installation. 15K 2 to 48 30 1 13/16 to 30 1 13/16 to 20 1 13/16 to 12 Slab & seat rings match on fully hard-faced surfaces Both upstream and downstream seat seal designs are PLACES 150 available to 1500 2500 2K to 5K 10K 15K 2 to 48 32 1 13/16 to 34 " 1 13/16 to 24 " 1 13/16 to 8 " Double isolation construction (two gate trims in one body also available) Twin seats design available for subsea API 6A pipeline / 17D installation 2 to 24 18 1 13/16 to 20 1 13/16 to 16 1 13/16 to 6 available seat desert low contact subsea stress HP metal seal topside PLACES 2 to 42 30 1 13/16 to 30 1 13/16 to 24 1 13/16 to 12 2 to 48 30 1 13/16 to 30 1 13/16 to 24 1 13/16 to 12 VALVES 2 to 48 30 1 13/16 to 30 1 13/16 to 20 1 13/16 to 8 SLAB GATE ALVES gas oil EXPANDING GATE VALVES ball SWING CHECK globe gate control
on/off & control subsea valve type ball gate available body Cast or Forged: LTCS; double expanding gate Super available obturator Forged: LTCS or Low Alloy Steel; Inconel Cladded Cast or Cast or Forged: LTCS; Inconel cladded Inconel cladded Cast or Double Expanding HardFacing: Gate Valves Stellite seal via mechanical means, stem thrust available achieves bubble-tight range seal * simultaneously and independently API at both 6A / upstream 17D and downstream 150 to 1500 seat. 2500 2K to 5K 10K 15K 2 to 48 30 1 13/16 to 30 1 13/16 to 20 1 13/16 to 12 Thus the valve creates a true and intrinsic double barrier. Proven API design 6DSSfor extreme deep subsea API 6A / installation 17D Fully 2 metal-metal seal (both seat-body and seat-gate) to 48 32 1 13/16 to 34 " 1 13/16 to 24 " 1 13/16 to 8 " Double block & bleed, double barrier Extremely highly available reliable in severe range service, * including deep API subsea 6DSSinstallations 2 to 24 18 1 13/16 to 20 1 13/16 to 16 1 13/16 to 6 Large variety of stem seals available, including Infinity metal stem seal (PetrolValves patent) Flexible seat design available guarantees range low contact * stresses for an extended cyclic life Any 2 to valve 42 end 30 connection 1 13/16 is to available 30 1 13/16 to 24 1 13/16 to 12 available seat HP SLAB GATE ALVES INTRINSICALLY ISOLATION 0505 2 to 48 30 1 13/16 to 30 1 13/16 to 24 1 13/16 to 12 EXPANDING GATE VALVES 2 to 48 30 1 13/16 to 30 1 13/16 to 20 1 13/16 to 8 SWING CHECK
gate Super Cast or 100 C 55 M 20 Y 0 K Cast or Forged: LTCS; Inconel cladded subsea 0 C 0 M 0 Y 80 K Inconel cladded Cast or 06 swing check Designed for deep subsea installation and operations Standard seat seal: metal-to-metal Lock 2 to open 24 via ROV 18 engagement 1 13/16 to 20 1 13/16 to 16 1 13/16 to 6 Smooth transition of internal conduit for safe pigging operations 2 to 48 30 1 13/16 to 30 1 13/16 to 20 1 13/16 to 12 2 to 48 32 1 13/16 to 34 " 1 13/16 to 24 " 1 13/16 to 8 " 150 Pig to guide, 1500 integral 2500with clapper, 2K to 5K permits 10K safe pigging 15Kin either direction 2 to 42 30 1 13/16 to 30 1 13/16 to 24 1 13/16 to 12 Different clapper-locking mechanism design are available to allow available safe reverse range pigging * operations 2 to 48 30 1 13/16 to 30 1 13/16 to 24 1 13/16 to 12 Large variety of stem seals available, including Infinity metal stem seal HP SLAB GATE ALVES EXPANDING GATE VALVES safe pigging 2 to 48 30 1 13/16 to 30 1 13/16 to 20 1 13/16 to 8 SWING CHECK
on/off & control subsea valve type ball gate available body non slam check available Cast or Forged: LTCS; Super obturator Forged: LTCS or Low Alloy Steel; Inconel Cladded Cast or Suitable for deep subsea installation and operations Non-Slam; quick (spring assisted)closure Cast or Forged: LTCS; Inconel cladded Inconel cladded Cast or Standard seat seal: metal-to-metal 2 to 48 30 1 13/16 to 30 1 13/16 to 20 1 13/16 to 12 2 to 48 32 1 13/16 to 34 " 1 13/16 to 24 " 1 13/16 to 8 " available seat 07 quick closing 2 to 24 18 1 13/16 to 20 1 13/16 to 16 1 13/16 to 6 2 to 42 30 1 13/16 to 30 1 13/16 to 24 1 13/16 to 12 SIL figures are evaluated available on PetrolValves range * own data base of API reliability 6DSS records constructed API from 6A / 17D feedback from field operators using our products over many years 2 to 48 30 1 13/16 to 30 1 13/16 to 24 1 13/16 to 12 HP high integrity pipeline protection system (hipps) Our HIPP System scope includes PetrolValves proprietary design and manufacture of and actuators. of service. SLAB GATE ALVES EXPANDING GATE VALVES 2 to 48 30 1 13/16 to 30 1 13/16 to 20 1 13/16 to 8 SWING CHECK
100 C 55 M 20 Y 0 K 0 C 0 M 0 Y 80 K subsea control 08 PetrolValves production range includes a large variety of control valve types specifically designed for deep subsea installation and operations. Control valve designs available include: Globe, Cage Ball (both top entry and end entry construction) and Axial Flow valve. Different trim selections are available to suit the client s required CV curve. Large variety of stem seals available, including Infinity metal stem seal PV s technical department can develop designs suitable to meet specific operating performance, PLACES including dynamic response. desert subsea topside PLACES gas customized cv curve oil VALVES ball globe gate control
actuators PetrolValves has a complete product line of subsea actuators and ROV driven gear boxes to suit any operational requirement. Where envelope dimensional space is limited, posing challenges to considering traditional rack and pinion designs, we have as an option, space saving helical spline designs. Our actuators are able to be incorporated with diver or ROV retrievability for safely retrieving of the entire actuator assembly for maintenance, should over-pressurization of the cylinders occur, or external damage from sinking objects striking the installed equipment. Further, PV have a patented Subsea Electric Actuator for our clients consideration. Rev 01 - June 2016 - Please visit our website www.petrol.com to get the latest revision. 2017 - Petrol protects all over the world its industrial and intellectual property rights and pursues their undue use
MANUfacturing plant Viale G. Borri, 42 21053 Castellanza (VA), Italia P +39 0331 334111 W petrol.com