Key Leadership Position Joint Qualification Board Application

Similar documents
Instructions for Completing a Key Leadership Position Joint Qualification Board Application

THE UNDER SECRETARY OF DEFENSE DEFENSE PENTAGON WASHINGTON, DC

Program Management. PREFERRED: o Level II or III Certification in a second DAWIA career field.

Major Defense Acquisition Programs (MDAP)

Reliability and Maintainability (R&M) Engineering Update

Alan F. Estevez. Principal Deputy Assistant Secretary of Defense for Logistics and Materiel Readiness

New Acquisition Policy and Its Impact on Systems Engineering

Considering Cost in Requirements Generation

Enabling System Safety Through Technical Excellence

Implementation of the Reliability & Maintainability (R&M) Engineering Body of Knowledge (BoK)

Logistics Community of Interest 1152 Production Control Series Competency-Based Learning Map and Training Strategy. Page 1

Job Description. Reference ID: OP002. About Us:

Management Team Linda Czajka - President & CEO Most Enterprising Women in Business in Joan Lockwood - Operations Vice President

Logistics Community of Interest 2001 General Supply Series Competency-Based Learning Map and Training Strategy. Page 1

Logistics Community of Interest 1670 Equipment Services Series Competency-Based Learning Map and Training Strategy

DoD Template for Application of TLCSM and PBL In the Weapon System Life Cycle

Reliability and Maintainability (R&M) Engineering Update

Army Systems Engineering Career Development Model

Competency-Based Learning Map Overview

NOMINEE INFORMATION SHEET FOR DOD LEADER DEVELOPMENT PROGRAMS

ECONOMIC BENEFITS ANALYSIS

Department of the Navy Probability of Program Success (PoPS)

NOMINEE INFORMATION SHEET FOR DOD LEADER DEVELOPMENT PROGRAMS

Intermediate Systems Acquisition Course. Lesson 2.11 Program Approval ADE-2. Program Approval ADE-2

DEFENSE ACQUISITION UNIVERSITY ISA 101 BASIC INFORMATION SYSTEM ACQUISITION

Enhanced Systems Engineering - Starting Programs Right

Implementation of the Continuous Learning Policy for the Department of Defense Acquisition, Technology, and Logistics Workforce (DoD AT&LWF)

DEPARTMENT OF DEFENSE Defense Contract Management Agency INSTRUCTION. Technical Pricing Support

System Safety in Systems Engineering V-Charts

Competency-Based Learning Map Overview

Integrated Product Support Procedures

Intermediate Systems Acquisition Course. Lesson 3.15 Full Rate Production ADE-3. Supporting ADE-3

NOMINEE INFORMATION SHEET FOR DOD LEADER DEVELOPMENT PROGRAMS

Logistics Community of Interest 0346 Logistics Management Series Competency-Based Learning Map and Training Strategy. Page 1

Download the document titled DOD for information regarding key program documentation and reports.

TECHNICAL REVIEWS AND AUDITS FOR SYSTEMS, EQUIPMENT AND COMPUTER SOFTWARE

Systems Engineering Challenges for an Army Life Cycle Software Engineering Center

IT MANAGER - BUSINESS & TECHNOLOGY APPLICATIONS (12235) ( )

Raytheon Implementation of the Demonstrated Logistician Program of SOLE The International Society of Logistics

SYSTEMS ENGINEERING PLAN (SEP) OUTLINE

Minimum years of experience 12 years

01/16/2019 Ellen Barber Lunch n Learn Integrated Baseline Review

COMPLIANCE WITH THIS PUBLICATION IS MANDATORY

PROACTIVE DMSMS: Part of Integrated Systems Engineering & Life Cycle Product Support Planning. Working Group

Analysis of Alternatives from a Cost Estimating Perspective. Kirby Hom and Kenny Ragland

Department of Defense Competency Management Implementation Guide. December 2015

TECHNICAL REVIEWS AND AUDITS

The Integrated Baseline Review (IBR)

Aloha Chapter. DoD Financial Management Certification Program. American Society of Military Comptrollers. Ms. Patsy Provines, CDFM 28 June 2012

FINANCING COMPANIES TRAINING AND COMPETENCY MODULE

Business Analyst Capability Assessments

REFERENCES Overview Quality Assurance Engineering Program...5

Defense Procurement & Acquisition Policy Acquisition Exchange Program. Project Description #1

2009 DoD Weapon System Product Support Assessment

IT MANAGER - BUSINESS & TECHNOLOGY APPLICATIONS (12235) ( )

FAC-P/PM CURRICULUM CATALOG. Accelerated Learning High Performance Tangible Results. Building Government Talent, Driving Agency Results

U.S. General Services Administration Federal Supply Service Authorized Federal Supply Schedule Price List

Developing Standardized Cost Element Structures (CES) for the United States Marine Corps (USMC) SCEA Conference Orlando, FL June 2012

THE LIFE CYCLE SUSTAINMENT PLAN (LCSP) OVERVIEW FOR LUNCH-AND-LEARN

SCEA Conference Integrated Critical Scheduling (ICS)

Independent Logistics Assessments

Chelan PUD Reliability Compliance Analyst Level Guide

CORROSION MANAGEMENT MATURITY MODEL

GENERAL SERVICES ADMINISTRATION FEDERAL SUPPLY SERVICE

Civilian Leader Opportunity. The Army Acquisition Product Director Board FY15/16 Announcement

Streamlining Acquisition Documents

EXPRESS PROGRAMMATIC STATEMENT OF WORK TABLE OF CONTENTS

Senior Rater Potential Evaluation (SRPE) Employee Instructions

Staffing Management Plan Template

Top 5 Systems Engineering Issues within DOD and Defense Industry

APPLIED COST ANALYSIS IN TEST AND EVALUATION (T&E)

Mission-Level Systems Engineering

2015 Program Excellence Award

ETASS II SKILL LEVEL AND LABOR CATEGORY DESCRIPTIONS. Skill Levels

Certified Human Resources Professional (CHRP) Competency Framework

DCMA Instruction Stewardship

Department of Defense (DoD) Standardized Non Appropriated Fund (NAF) Contracting Officer Representative (COR) Requirements Guidance

Defense Pricing and Contracting Acquisition Exchange Program. Project Description #1

IPMA-CANADA INTERNATIONAL CERTIFICATION PROGRAM IPMA-CP (IN TRAINING) IPMA-CP IPMA-ACP IPMA-EX IPMA-CE

Given design trade studies, interpret the results to recommend the most cost-effective concept for development.

SYSTEMS ENGINEERING REQUIREMENTS AND PRODUCTS

Career Ladder Editable Template

(c) 2006 DLB Associates, LLC All Rights Reserved 1. Definition. Cultural Change Requires: The Driving Forces Behind EPM.

Product Support and Human Capital

Defense Procurement & Acquisition Policy Acquisition Exchange Program. Project Description #1

ISA 201 Intermediate Information System Acquisition

EXHIBIT A STATEMENT OF WORK

Interoperability Developmental Test & Evaluation Guidance

Engineering the Business of Defense Acquisition: An Analysis of Program Office Processes

DOD INSTRUCTION BUSINESS SYSTEMS REQUIREMENTS AND ACQUISITION

Acquisition Reform: Integrate Technical Performance with Earned Value Management

POSITION DETAILS. Enterprise Infrastructure Services

Reliability and Maintainability (R&M) Engineering Update

Cover Page ASSISTANT SECRETARY OF THE NAVY (RESEARCH, DEVELOPMENT AND ACQUISITION) Department of the Navy Contracting Professional Development

Integrated Product Support

OFFICE OF THE UNDER SECRET ARY OF DEFENSE 3000 DEFENSE PENTAGON WASHINGTON, DC

Converting High-Level Systems Engineering Policy to a Workable Program 26 Oct 05

1. IDENTIFICATION. Freebalance coding: PURPOSE 3. SCOPE

ADMINISTRATIVE INSTRUCTION 40 EMPLOYEE LEARNING AND DEVELOPMENT

Transcription:

Key Leadership Position Joint Qualification Board Application The information collected in this application will be used by the Key Leadership Position (KLP) Qualification Board to identify personnel with the knowledge, skills, abilities, and experiences necessary to fill Key Leadership Positions of Major Defense Acquisition Programs (MDAP) or Major Automated Information System (MAIS) programs. This application will be reviewed by the KLP Joint Qualification Board who will identify top talent to include in a pool of potential candidates for KLPs. This application is not specific to any open position and does not guarantee selection for a KLP. Please refer to the Instructions for Completing a Key Leadership Position Joint Qualification Board Application for step-by-step guidance on completing this application. Career Field Candidacy Applicant Name Component/Organization Life Cycle Logistics Product Support Manager Applicant E-mail Applicant Phone Number Official Mailing Address Military/Civilian Member of Defense Acquisition Corps Rank/Grade SECTION 1: KLP COMMON CROSS-FUNCTIONAL REQUIREMENTS Section 1.1.: Education, Certification, and Training Requirements Enter information in the appropriate box Degree Field of Study School Bachelor s Degree Education DAWIA Certification Relevant Advanced Degree Intermediate / Senior / Executive School Certificate DAWIA Certifications (mark all appropriate career fields and certification levels obtained) Auditing Business-CE Business-FM Contracting Industrial Property PQM S&TM Engineering Information Technology Program Management Test & Evaluation Facilities Engineering Life Cycle Logistics Purchasing KLP Qualification Board Application LCL Page 1

Section 1.2.: Currency and Tenure Requirements Mark the box to indicate that you meet the following requirements I am compliant with currency requirements (80 hours of continuous learning points every 2 years) Section 1.3.: Experience Requirements I acknowledge the requirement for a tenure agreement. (Persons selected to fill KLPs must sign a 3-year tenure agreement (4-years in the PM career field). Being identified for the KLP Candidate pool does not require a tenure agreement.) Mark the box to indicate that you meet the following requirements I am a GS-14/GS-15 or O-5/O-6 or higher position I served 2 years as a functional mentor (minimum 10 hours per year) Section 1.4.: Prior Identification by a KLP Joint Qualification Board I participated in cross-functional and broadening assignments/rotations I have 8 years of acquisition experience, or equivalent demonstrated proficiency -- OR -- For ACAT II PM or ACAT I DPM positions, I have 6 years of acquisition experience. Mark the boxes of any career field Qualification Boards that have already deemed you qualified as a KLP* Business Financial Business Cost Estimating Contracting Management Engineering Information Technology Life Cycle Logistics Production, Quality and Program Management Manufacturing * HCI will validate your qualification prior to acceptance of this application. Section 1.5.: Executive Leadership Test and Evaluation This section should highlight your Executive Leadership experience across all acquisition career fields addressing some or all of the competencies defined in the Instructions for Completing a Key Leadership Position Joint Qualification Board Application. Enter your work experience/evidence of requirement fulfillment in the box immediately below each requirement. Responses are limited to 500 characters or fewer per requirement. Describe your experience in applying Fundamental Leadership Skills. KLP Joint Qualification Board Application LCL Page 2

Describe your experience in Leading Change and Leading People. Describe your experience with taking a Results-Driven Approach and Building Coalitions. Describe your Business Acumen and Enterprise-Wide Perspective. KLP Joint Qualification Board Application LCL Page 3

Section 1.6.: Cross-Functional Competencies This section focuses on your broader experience, not limited to the career field for which you are applying for KLP Qualification. (Section 2 will focus directly on your specific career field.) Highlight your experience in and with other acquisition career fields, addressing some or all of the competencies defined in the Instructions for Completing a Key Leadership Position Joint Qualification Board Application. Enter your work experience/evidence of requirement fulfillment in the box immediately below each requirement. Responses are limited to 1000 characters or fewer per requirement. Describe your experience in Program Execution. Describe your experience in Technical Management. Describe your experience in Business Management. KLP Joint Qualification Board Application LCL Page 4

SECTION 2: PRODUCT SUPPORT MANAGER SPECIFIC REQUIREMENTS Please refer to the Instructions for Completing a Key Leadership Position Joint Qualification Board Application for step-by-step guidance on completing this portion of the Application. The Specific Functional Requirements for Product Support Manager are found at http://icatalog.dau.mil/onlinecatalog/specific_functional_klp_requirements_preferences.pdf. The LCL competencies and descriptions are found at https://acc.dau.mil/communitybrowser.aspx?id=635971&lang=en-us. Section 2 focuses on your LCL and technical experience in the full acquisition life cycle supporting LCL: Planning, Preparation, Execution, Analysis, Evaluation, and Reporting. The categories in Sections 2.3 2.5 are key LCL Competencies. Your responses should focus on your knowledge and demonstrated abilities for these different areas. Include tasks associated with defining the LCL problem; what problem needed to be solved; and how you directed the LCL organization to resolve the problem. Section 2.1.: Product Support Manager Specific Experience Requirements Mark the box to indicate that you meet the following requirements. I have 2 or more years of logistics experience in a program office or similar organization. (required) I have 2 or more years of supervisory or team lead experience at the GS-13 level or higher. (required) I have received Executive/Strategic Leadership/Development Training. Course Taken: Section 2.2.: General Background Summary Provide a brief summary of your background and your reason for applying to the KLP Qualification Board. Response is limited to 1000 characters or fewer. KLP Joint Qualification Board Application LCL Page 5

Section 2.3.: Product Support Manager Technical Management Enter your work experience/evidence of requirement fulfillment in the box immediately below each requirement. Responses are limited to 750 characters or fewer per requirement. Describe your experience in Requirements Management (ICD, CDD, CPD, etc.). Describe your experience in Life Cycle Logistics (including the Life Cycle Sustainment Plan). Describe your experience in Technical Reviews (including SRR, SFR, PDR, CDR, IPT, etc.). Describe your experience in Configuration Management. KLP Joint Qualification Board Application LCL Page 6

Describe your experience in Intellectual Property Strategy. Describe your experience in Systems Engineering (including the Systems Engineering Plan, Technology Development Strategy, and Technology Readiness Assessment). Describe your experience in Logistics and Product Support. Describe your experience in Software Acquisition and Maintenance. KLP Joint Qualification Board Application LCL Page 7

Describe your experience in Test and Evaluation (including the Test and Evaluation Strategy and Test and Evaluation Master Plan). Describe your experience in Production, Quality, and Manufacturing. Describe your experience in Program Security. Describe your experience with Other documents, including the Information Support Plan, CONOPS, etc. KLP Joint Qualification Board Application LCL Page 8

Section 2.4.: Product Support Manager Program Execution Enter your work experience/evidence of requirement fulfillment in the box immediately below each requirement. Responses are limited to 750 characters or fewer per requirement. Describe your experience with Acquisition Resources (DoDI 5000 series, FAR parts 1-18, applicable OMB circulars, Defense Acquisition Guide, DoD Guide to Planning and Scheduling, etc.). Describe your experience in Scheduling (Integrated Master Schedule, Work Breakdown Structure, etc). Describe your experience in Contractor Performance and Earned Value Management. KLP Joint Qualification Board Application LCL Page 9

Describe your experience in Risk Management. Describe your experience in Program Health and Sustainment, Metrics, Policy and Reports. Describe your experience in Program Documentation, such as Life Cycle Sustainment Plan (LCSP), Acquisition Strategy (AS), Systems Engineering Plan (SEP), Acquisition Program Baseline (APB), Core Logistics Assessment (CLA), Core Depot Assessment (CDA), Replaced System Sustainment Plan (RSSP), Program Management Plan (PMP), Acquisition Decision Memorandum (ADM), Affordability Estimate, Analysis of Alternatives (AoA), Cost Analysis and Requirements Description (CARD), Integrated Master Plan (IMP), Contract Funds Status Report(C/FSR), Program Protection Plan (PPP), etc.). KLP Joint Qualification Board Application LCL Page 10

Section 2.5.: Product Support Manager Business Management Enter your work experience/evidence of requirement fulfillment in the box immediately below the requirement. Responses are limited to 750 characters or fewer per requirement. Describe your experience in Life Cycle Cost and Total Ownership Cost (including Independent Cost Estimates, Manpower Estimates, etc). Describe your experience in Business Case Analysis (including assessing courses of action, benefits, risks, and sensitivity). Describe your experience in Contracting (including Market Research, etc.). KLP Joint Qualification Board Application LCL Page 11

Describe your experience in Budget, Financial Planning, and Management (including PPBE Documents, Reports, etc.). Describe your experience in Legal (including Reports to Congress, etc.). KLP Joint Qualification Board Application LCL Page 12

SECTION 3: APPLICATION CERTIFICATION AND ENDORSEMENT Please refer to the Instructions for Completing a Key Leadership Position Joint Qualification Board Application for step-by-step guidance on completing this application. Applicant Certification I certify that I have accurately represented my experience and knowledge in this application for consideration in the Key Leadership Position qualification pool. Signature Title Date Supervisor Concurrence I concur that the applicant has represented their technical competence in the experience and knowledge stated in this application. I have supervised this applicant for years and months. Signature Title Date Supervisor E-Mail Supervisor Phone Senior Executive Service/Flag Officer/General Officer Endorsement I endorse the applicant as a candidate for the Key Leadership Position Joint Qualification Board. Signature Title Date Endorser E-Mail Endorser Phone KLP Joint Qualification Board Application LCL Page 13