Drilling System. ATI Stellram tooling systems for all your drilling requirements.

Drilling System ATI Stellram tooling systems for all your drilling requirements.

All ATI Stellram s products are supported by a highly technical sales team backed by an extensive customer care policy. lease contact us for additional information on any of the products illustrated in this catalog or any other part of ATI Stellram s comprehensive tooling programme. TOLL FREE CUSTOER SERVICE UITED STATES TEL: 800 232 1200 FAX: 800 223 2219 CAADA TEL: 800 668 6928 FAX: 800 432 6227 EXICO TEL: 011 877 756 0947 FAX: 011 877 285 2505 www.atistellram.com The ATI Advantage Stainless steels, titanium and titanium alloys, nickel based alloys, silicon electrical steels, armor materials and tool steels. Titanium based alloys, nickel based and cobalt based alloys, specialty alloys. Zirconium, hafnium, niobium, titanium alloys. Gray and ductile iron casting. Carbon and alloy steel forgings. Specialised machining and finishing for titanium mill products. SOLUTIOS FOR DIFFICULT TO ACIE ATERIALS

The Technology Two grades of carbide in one tool can mean as much as four times the performance. ATI Stellram is positioned to change the way the metal cutting industry thinks, with a brand new patented technology that combines two grades of carbide into one tool. (US atent: 6,511,265 and foreign pending) ATI Stellram s new ARDCORE technology offers a unique design so that the optimum carbide grade is used at critical points, enhancing performance and improving tool life. One carbide grade here Another in the centre ARDCORE technology eliminated the need for compromise, dramatically improving performance. The Advantages ARDCORE technology drills will cut faster, last longer and produce up to 4 times the number of holes, with better surface quality, than any other high performance drill available in today s market. The erformance The outer edges of a drill bit are running at tremendous speed, while the point is basically stationary. The carbide grade chosen had to compensate for this and there was a compromise performance for durability. In the past, this has meant that the bit is prone to chipping at certain points, which is a critical factor in maintenance and reduced tool life. The ARDCORE technology consists in having two grades of carbide one tailored to the high speed of the tool s outer diameter and another resilient enough to handle the slow speed of the tool centre. Testing shows that the new hardcore technology greatly reduces wear. And because the carbide grade is optimised for the different portions of the tool, operating speeds can be increased. We ve tested ARDCORE technology by ATI Stellram against some of the best products in the business and the results are astounding. Figure 1. Shows chipping along the cutting edge, on a reputable high performance drill that is currently in the market, after just 8 minutes into its drilling cycle. Figure 2. ATI Stellram ARDCORE technology drill shows uniform wear along the cutting edge after continuous use, running at a higher surface speed and feed. ono Block Carbide ARDCORE Technology Fig. 1 Fig. 2 1

The ARDCORE aterial atented process for the substrate design and process, manufactured by ATI Stellram (US atent: 6,511,265). Unique bonding of 2 micrograin carbides. ATI Stellram s patented process allows the two micrograin substrates to be co-extruded around each other to produce optimum grades positioned at the critical parts of the tool to improve durability and allow faster operation. This allows the ARDCORE technology drill to penetrate materials at higher feed rates than existing high performance drills available in the market today. The technology eliminates the risk of drill point breakage, which is typical for these at high speeds and feeds, due to the variance in surface speeds between periphery and the point. aterial application example: Customer C. Drill: SD1050/0.413/301 A CT600 aterial 4140 300B, Drilling depth: 33mm V c : 91m/min 295fpm f: 0.25mm/tr 0.01ipr V f : 680mm/min 26.8ipm 814 holes 36 minutes Technology Tough core ensures shock resistance igh hardness improves wear resistance 2

Drill Description Features Accurate ground edge preparation Excellent designed flute profile for best chip evacuation 140º point angle geometry produced to zero run out Grade: CT600 TiAl structure ano Thickness 4 microns Wear resistance and limitation of the temperature diffusion Unique design in the market. The combination of the unique ARDCORE material, the specially designed tool geometry and a precise grinding process provides a tremendous productivity increase. 3

omenclature StellDrill ARDCORE Series 301 S D 0317 / 0.125 / 301 A CT600 Type Diameter mm Diameter inch Series Ratio according DI6537K Shank Grade StellDrill ARDCORE Series 501 S D 0317 / 0.125 / 501 E CT600 Type Diameter mm Diameter inch Series Ratio according DI6537L Shank Grade lease note: the shank description is in accordance with DI6535. A = cylindrical shank E = inclined clamping flat / whistle notch AK = cylindrical shank internal coolant holes EK = inclined clamping flat / whistle notch internal coolant holes Drilling tolerances Common standard: DI 6537 Shank tolerance: (d 2 ) h6 Drill tolerance: (d 1 ) m7 ole tolerance: IT 8-9 Surface quality: R a 1-2 By drilling low carbon steel or stainless steel, the surface quality may be slightly inferior. Drill tolerance metric d 1 3 + 0,012 / + 0,002 d 1 3 6 + 0,016 / + 0,004 d 1 6 10 + 0,021 / + 0,006 d 1 10 16 + 0,025 / + 0,007 Drill tolerance inch d 1 0,118 + 0,000472 / + 0,0000787 d 1 0,118 0,236 + 0,000623 / + 0,000157 d 1 0,236 0,394 + 0,000827 / + 0,000236 d 1 0,394 0,630 + 0,000984 / + 0,000275 4

140º Series 301 d 1 d 2 l 3 l 4 l 2 l 1 ARDCORE Drill Series 301 ED# Description Grade Drill Drill d Drills for d 2 Diameter Diameter 2 mm l inch 1 l 1 l 2 l 2 l 3 l 3 l 4 l 4 Threads Shank mm inch mm inch mm inch mm inch d 1 mm m 7 d 1 inch m 7 Shank 029735 SD0300/0.118/301A CT600 3,00 0,118 6 0,236 62 2,441 20 0,787 14 0,551 36 1,417 029736 SD0300/0.118/301E CT600 3,00 0,118 6 0,236 62 2,441 20 0,787 14 0,551 36 1,417 029737 SD0310/0.122/301A CT600 3,10 0,122 6 0,236 62 2,441 20 0,787 14 0,551 36 1,417 029738 SD0310/0.122/301E CT600 3,10 0,122 6 0,236 62 2,441 20 0,787 14 0,551 36 1,417 029739 SD0317/0.125/301A CT600 3,17 1/8 6 0,236 62 2,441 20 0,787 14 0,551 36 1,417 029740 SD0317/0.125/301E CT600 3,17 1/8 6 0,236 62 2,441 20 0,787 14 0,551 36 1,417 029741 SD0320/0.126/301A CT600 3,20 0,126 6 0,236 62 2,441 20 0,787 14 0,551 36 1,417 029742 SD0320/0.126/301E CT600 3,20 0,126 6 0,236 62 2,441 20 0,787 14 0,551 36 1,417 029743 SD0330/0.130/301A CT600 3,30 0,130 6 0,236 62 2,441 20 0,787 14 0,551 36 1,417 029744 SD0330/0.130/301E CT600 3,30 0,130 6 0,236 62 2,441 20 0,787 14 0,551 36 1,417 029745 SD0340/0.134/301A CT600 3,40 0,134 6 0,236 62 2,441 20 0,787 14 0,551 36 1,417 029746 SD0340/0.134/301E CT600 3,40 0,134 6 0,236 62 2,441 20 0,787 14 0,551 36 1,417 029747 SD0350/0.138/301A CT600 3,50 0,138 6 0,236 62 2,441 20 0,787 14 0,551 36 1,417 029748 SD0350/0.138/301E CT600 3,50 0,138 6 0,236 62 2,441 20 0,787 14 0,551 36 1,417 029749 SD0357/0.140/301A CT600 3,57 9/64 6 0,236 62 2,441 20 0,787 14 0,551 36 1,417 029750 SD0357/0.140/301E CT600 3,57 9/64 6 0,236 62 2,441 20 0,787 14 0,551 36 1,417 029751 SD0360/0.142/301A CT600 3,60 0,142 6 0,236 62 2,441 20 0,787 14 0,551 36 1,417 029752 SD0360/0.142/301E CT600 3,60 0,142 6 0,236 62 2,441 20 0,787 14 0,551 36 1,417 029753 SD0370/0.146/301A CT600 3,70 0,146 6 0,236 62 2,441 20 0,787 14 0,551 36 1,417 029754 SD0370/0.146/301E CT600 3,70 0,146 6 0,236 62 2,441 20 0,787 14 0,551 36 1,417 029755 SD0380/0.150/301A CT600 3,80 0,150 6 0,236 66 2,598 24 0,945 17 0,669 36 1,417 029756 SD0380/0.150/301E CT600 3,80 0,150 6 0,236 66 2,598 24 0,945 17 0,669 36 1,417 029757 SD0390/0.154/301A CT600 3,90 0,154 10-24 UC 6 0,236 66 2,598 24 0,945 17 0,669 36 1,417 029758 SD0390/0.154/301E CT600 3,90 0,154 10-24 UC 6 0,236 66 2,598 24 0,945 17 0,669 36 1,417 029759 SD0397/0.156/301A CT600 3,97 5/32 6 0,236 66 2,598 24 0,945 17 0,669 36 1,417 029760 SD0397/0.156/301E CT600 3,97 5/32 6 0,236 66 2,598 24 0,945 17 0,669 36 1,417 029761 SD0400/0.157/301A CT600 4,00 0,157 6 0,236 66 2,598 24 0,945 17 0,669 36 1,417 029762 SD0400/0.157/301E CT600 4,00 0,157 6 0,236 66 2,598 24 0,945 17 0,669 36 1,417 029763 SD0410/0.161/301A CT600 4,10 0,161 10-32 UF 6 0,236 66 2,598 24 0,945 17 0,669 36 1,417 029764 SD0410/0.161/301E CT600 4,10 0,161 10-32 UF 6 0,236 66 2,598 24 0,945 17 0,669 36 1,417 029765 SD0420/0.165/301A CT600 4,20 0,165 6 0,236 66 2,598 24 0,945 17 0,669 36 1,417 029766 SD0420/0.165/301E CT600 4,20 0,165 6 0,236 66 2,598 24 0,945 17 0,669 36 1,417 029767 SD0430/0.169/301A CT600 4,30 0,169 5 6 0,236 66 2,598 24 0,945 17 0,669 36 1,417 029768 SD0430/0.169/301E CT600 4,30 0,169 5 6 0,236 66 2,598 24 0,945 17 0,669 36 1,417 029769 SD0437/0.172/301A CT600 4,37 11/64 6 0,236 66 2,598 24 0,945 17 0,669 36 1,417 029770 SD0437/0.172/301E CT600 4,37 11/64 6 0,236 66 2,598 24 0,945 17 0,669 36 1,417 029771 SD0440/0.173/301A CT600 4,40 0,173 6 0,236 66 2,598 24 0,945 17 0,669 36 1,417 029772 SD0440/0.173/301E CT600 4,40 0,173 6 0,236 66 2,598 24 0,945 17 0,669 36 1,417 029773 SD0450/0.177/301A CT600 4,50 0,177 6 0,236 66 2,598 24 0,945 17 0,669 36 1,417 029774 SD0450/0.177/301E CT600 4,50 0,177 6 0,236 66 2,598 24 0,945 17 0,669 36 1,417 aterial Designations Unalloyed Steels Stainless Steels K Cast Irons S igh Temp. Alloys Stainless ard aterials 5

140º Series 301Continued.. d 1 d 2 l 3 l 4 l 2 l 1 ARDCORE Drill Series 301 ED# Description Grade Drill Drill d Drills for d 2 Diameter Diameter 2 mm l inch 1 l 1 l 2 l 2 l 3 l 3 l 4 l 4 Threads Shank mm inch mm inch mm inch mm inch d 1 mm m 7 d 1 inch m 7 Shank 029775 SD0460/0.181/301A CT600 4,60 0,181 6 0,236 66 2,598 24 0,945 17 0,669 36 1,417 029776 SD0460/0.181/301E CT600 4,60 0,181 6 0,236 66 2,598 24 0,945 17 0,669 36 1,417 029777 SD0470/0.185/301A CT600 4,70 0,185 6 0,236 66 2,598 24 0,945 17 0,669 36 1,417 029778 SD0470/0.185/301E CT600 4,70 0,185 6 0,236 66 2,598 24 0,945 17 0,669 36 1,417 029779 SD0476/0.187/301A CT600 4,76 3/16 6 0,236 66 2,598 28 1,102 20 0,787 36 1,417 029780 SD0476/0.187/301E CT600 4,76 3/16 6 0,236 66 2,598 28 1,102 20 0,787 36 1,417 029781 SD0480/0.189/301A CT600 4,80 0,189 12-32 UF 6 0,236 66 2,598 28 1,102 20 0,787 36 1,417 029782 SD0480/0.189/301E CT600 4,80 0,189 12-32 UF 6 0,236 66 2,598 28 1,102 20 0,787 36 1,417 029783 SD0490/0.193/301A CT600 4,90 0,193 6 0,236 66 2,598 28 1,102 20 0,787 36 1,417 029784 SD0490/0.193/301E CT600 4,90 0,193 6 0,236 66 2,598 28 1,102 20 0,787 36 1,417 030363 SD0500/0.197/301A CT600 5,00 0,197 6 0,236 66 2,598 28 1,102 20 0,787 36 1,417 029785 SD0500/0.197/301E CT600 5,00 0,197 6 0,236 66 2,598 28 1,102 20 0,787 36 1,417 029786 SD0510/0.201/301A CT600 5,10 0,201 6 6 0,236 66 2,598 28 1,102 20 0,787 36 1,417 029787 SD0510/0.201/301E CT600 5,10 0,201 6 6 0,236 66 2,598 28 1,102 20 0,787 36 1,417 029788 SD0516/0.203/301A CT600 5,16 13/64 6 0,236 66 2,598 28 1,102 20 0,787 36 1,417 029789 SD0516/0.203/301E CT600 5,16 13/64 6 0,236 66 2,598 28 1,102 20 0,787 36 1,417 029790 SD0520/0.205/301A CT600 5,20 0,205 6 0,236 66 2,598 28 1,102 20 0,787 36 1,417 029791 SD0520/0.205/301E CT600 5,20 0,205 6 0,236 66 2,598 28 1,102 20 0,787 36 1,417 029792 SD0530/0.209/301A CT600 5,30 0,209 6 0,236 66 2,598 28 1,102 20 0,787 36 1,417 029793 SD0530/0.209/301E CT600 5,30 0,209 6 0,236 66 2,598 28 1,102 20 0,787 36 1,417 029794 SD0540/0.213/301A CT600 5,40 0,213 6 0,236 66 2,598 28 1,102 20 0,787 36 1,417 029795 SD0540/0.213/301E CT600 5,40 0,213 6 0,236 66 2,598 28 1,102 20 0,787 36 1,417 029796 SD0550/0.217/301A CT600 5,50 0,217 6 0,236 66 2,598 28 1,102 20 0,787 36 1,417 029797 SD0550/0.217/301E CT600 5,50 0,217 6 0,236 66 2,598 28 1,102 20 0,787 36 1,417 029798 SD0556/0.219/301A CT600 5,56 7/32 6 0,236 66 2,598 28 1,102 20 0,787 36 1,417 029799 SD0556/0.219/301E CT600 5,56 7/32 6 0,236 66 2,598 28 1,102 20 0,787 36 1,417 029800 SD0560/0.220/301A CT600 5,60 0,220 6 0,236 66 2,598 28 1,102 20 0,787 36 1,417 029801 SD0560/0.220/301E CT600 5,60 0,220 6 0,236 66 2,598 28 1,102 20 0,787 36 1,417 029802 SD0570/0.224/301A CT600 5,70 0,224 6 0,236 66 2,598 28 1,102 20 0,787 36 1,417 029803 SD0570/0.224/301E CT600 5,70 0,224 6 0,236 66 2,598 28 1,102 20 0,787 36 1,417 029804 SD0580/0.228/301A CT600 5,80 0,228 6 0,236 66 2,598 28 1,102 20 0,787 36 1,417 029805 SD0580/0.228/301E CT600 5,80 0,228 6 0,236 66 2,598 28 1,102 20 0,787 36 1,417 029806 SD0590/0.232/301A CT600 5,90 0,232 6 0,236 66 2,598 28 1,102 20 0,787 36 1,417 029807 SD0590/0.232/301E CT600 5,90 0,232 6 0,236 66 2,598 28 1,102 20 0,787 36 1,417 029808 SD0595/0.234/301A CT600 5,95 15/64 6 0,236 66 2,598 28 1,102 20 0,787 36 1,417 029809 SD0595/0.234/301E CT600 5,95 15/64 6 0,236 66 2,598 28 1,102 20 0,787 36 1,417 029810 SD0600/0.236/301A CT600 6,00 0,236 6 0,236 66 2,598 28 1,102 20 0,787 36 1,417 029811 SD0600/0.236/301E CT600 6,00 0,236 6 0,236 66 2,598 28 1,102 20 0,787 36 1,417 029812 SD0610/0.240/301A CT600 6,10 0,240 8 0,315 79 3,110 34 1,339 24 0,945 36 1,417 029813 SD0610/0.240/301E CT600 6,10 0,240 8 0,315 79 3,110 34 1,339 24 0,945 36 1,417 aterial Designations Unalloyed Steels Stainless Steels K Cast Irons S igh Temp. Alloys 6 Stainless ard aterials

140º Series 301Continued.. d 1 d 2 l 3 l 4 l 2 l 1 ARDCORE Drill Series 301 ED# Description Grade Drill Drill d Drills for d 2 Diameter Diameter 2 mm l inch 1 l 1 l 2 l 2 l 3 l 3 l 4 l 4 Threads Shank mm inch mm inch mm inch mm inch d 1 mm m 7 d 1 inch m 7 Shank 030364 SD0620/0.244/301A CT600 6,20 0,244 8 0,315 79 3,110 34 1,339 24 0,945 36 1,417 029814 SD0620/0.244/301E CT600 6,20 0,244 8 0,315 79 3,110 34 1,339 24 0,945 36 1,417 029815 SD0630/0.248/301A CT600 6,30 0,248 8 0,315 79 3,110 34 1,339 24 0,945 36 1,417 030365 SD0630/0.248/301E CT600 6,30 0,248 8 0,315 79 3,110 34 1,339 24 0,945 36 1,417 029816 SD0635/0.250/301A CT600 6,35 1/4 8 0,315 79 3,110 34 1,339 24 0,945 36 1,417 029817 SD0635/0.250/301E CT600 6,35 1/4 8 0,315 79 3,110 34 1,339 24 0,945 36 1,417 029818 SD0640/0.252/301A CT600 6,40 0,252 8 0,315 79 3,110 34 1,339 24 0,945 36 1,417 029819 SD0640/0.252/301E CT600 6,40 0,252 8 0,315 79 3,110 34 1,339 24 0,945 36 1,417 029820 SD0650/0.256/301A CT600 6,50 0,256 8 0,315 79 3,110 34 1,339 24 0,945 36 1,417 029821 SD0650/0.256/301E CT600 6,50 0,256 8 0,315 79 3,110 34 1,339 24 0,945 36 1,417 029822 SD0660/0.260/301A CT600 6,60 0,260 8 0,315 79 3,110 34 1,339 24 0,945 36 1,417 029823 SD0660/0.260/301E CT600 6,60 0,260 8 0,315 79 3,110 34 1,339 24 0,945 36 1,417 029824 SD0670/0.264/301A CT600 6,70 0,264 5/18-18UF 8 0,315 79 3,110 34 1,339 24 0,945 36 1,417 029825 SD0670/0.264/301E CT600 6,70 0,264 5/18-18UF 8 0,315 79 3,110 34 1,339 24 0,945 36 1,417 029826 SD0675/0.266/301A CT600 6,75 17/64 8 0,315 79 3,110 34 1,339 24 0,945 36 1,417 029827 SD0675/0.266/301E CT600 6,75 17/64 8 0,315 79 3,110 34 1,339 24 0,945 36 1,417 029828 SD0680/0.268/301A CT600 6,80 0,268 8 0,315 79 3,110 34 1,339 24 0,945 36 1,417 029829 SD0680/0.268/301E CT600 6,80 0,268 8 0,315 79 3,110 34 1,339 24 0,945 36 1,417 029830 SD0690/0.272/301A CT600 6,90 0,272 8 0,315 79 3,110 34 1,339 24 0,945 36 1,417 029831 SD0690/0.272/301E CT600 6,90 0,272 8 0,315 79 3,110 34 1,339 24 0,945 36 1,417 029832 SD0700/0.276/301A CT600 7,00 0,276 8 0,315 79 3,110 34 1,339 24 0,945 36 1,417 029833 SD0700/0.276/301E CT600 7,00 0,276 8 0,315 79 3,110 34 1,339 24 0,945 36 1,417 029834 SD0710/0.280/301A CT600 7,10 0,280 F8x1 8 0,315 79 3,110 41 1,614 29 1,142 36 1,417 030366 SD0710/0.280/301E CT600 7,10 0,280 F8x1 8 0,315 79 3,110 41 1,614 29 1,142 36 1,417 029835 SD0714/0.281/301A CT600 7,14 9/32 8 0,315 79 3,110 41 1,614 29 1,142 36 1,417 029836 SD0714/0.281/301E CT600 7,14 9/32 8 0,315 79 3,110 41 1,614 29 1,142 36 1,417 029837 SD0720/0.283/301A CT600 7,20 0,283 8 0,315 79 3,110 41 1,614 29 1,142 36 1,417 029838 SD0720/0.283/301E CT600 7,20 0,283 8 0,315 79 3,110 41 1,614 29 1,142 36 1,417 029839 SD0730/0.287/301A CT600 7,30 0,287 8 0,315 79 3,110 41 1,614 29 1,142 36 1,417 029840 SD0730/0.287/301E CT600 7,30 0,287 8 0,315 79 3,110 41 1,614 29 1,142 36 1,417 029841 SD0740/0.291/301A CT600 7,40 0,291 8 0,315 79 3,110 41 1,614 29 1,142 36 1,417 029842 SD0740/0.291/301E CT600 7,40 0,291 8 0,315 79 3,110 41 1,614 29 1,142 36 1,417 029843 SD0750/0.295/301A CT600 7,50 0,295 8 0,315 79 3,110 41 1,614 29 1,142 36 1,417 029844 SD0750/0.295/301E CT600 7,50 0,295 8 0,315 79 3,110 41 1,614 29 1,142 36 1,417 029845 SD0754/0.297/301A CT600 7,54 19/64 8 0,315 79 3,110 41 1,614 29 1,142 36 1,417 029846 SD0754/0.297/301E CT600 7,54 19/64 8 0,315 79 3,110 41 1,614 29 1,142 36 1,417 029847 SD0760/0.299/301A CT600 7,60 0,299 8 0,315 79 3,110 41 1,614 29 1,142 36 1,417 029848 SD0760/0.299/301E CT600 7,60 0,299 8 0,315 79 3,110 41 1,614 29 1,142 36 1,417 029849 SD0770/0.303/301A CT600 7,70 0,303 8 0,315 79 3,110 41 1,614 29 1,142 36 1,417 029850 SD0770/0.303/301E CT600 7,70 0,303 8 0,315 79 3,110 41 1,614 29 1,142 36 1,417 aterial Designations Unalloyed Steels Stainless Steels K Cast Irons S igh Temp. Alloys Stainless ard aterials 7

140º Series 301Continued.. d 1 d 2 l 3 l 4 l 2 l 1 ARDCORE Drill Series 301 ED# Description Grade Drill Drill d Drills for d 2 Diameter Diameter 2 mm l inch 1 l 1 l 2 l 2 l 3 l 3 l 4 l 4 Threads Shank mm inch mm inch mm inch mm inch d 1 mm m 7 d 1 inch m 7 Shank 029851 SD0780/0.307/301A CT600 7,80 0,307 8 0,315 79 3,110 41 1,614 29 1,142 36 1,417 029852 SD0780/0.307/301E CT600 7,80 0,307 8 0,315 79 3,110 41 1,614 29 1,142 36 1,417 029853 SD0790/0.311/301A CT600 7,90 0,311 8 0,315 79 3,110 41 1,614 29 1,142 36 1,417 029854 SD0790/0.311/301E CT600 7,90 0,311 8 0,315 79 3,110 41 1,614 29 1,142 36 1,417 029855 SD0794/0.313/301A CT600 7,94 5/16 8 0,315 79 3,110 41 1,614 29 1,142 36 1,417 029856 SD0794/0.313/301E CT600 7,94 5/16 8 0,315 79 3,110 41 1,614 29 1,142 36 1,417 029857 SD0800/0.315/301A CT600 8,00 0,315 8 0,315 79 3,110 41 1,614 29 1,142 36 1,417 029858 SD0800/0.315/301E CT600 8,00 0,315 8 0,315 79 3,110 41 1,614 29 1,142 36 1,417 029859 SD0810/0.319/301A CT600 8,10 0,319 10 0,394 89 3,504 47 1,850 35 1,378 40 1,575 029860 SD0810/0.319/301E CT600 8,10 0,319 10 0,394 89 3,504 47 1,850 35 1,378 40 1,575 029861 SD0820/0.323/301A CT600 8,20 0,323 10 0,394 89 3,504 47 1,850 35 1,378 40 1,575 029862 SD0820/0.323/301E CT600 8,20 0,323 10 0,394 89 3,504 47 1,850 35 1,378 40 1,575 029863 SD0830/0.327/301A CT600 8,30 0,327 10 0,394 89 3,504 47 1,850 35 1,378 40 1,575 029864 SD0830/0.327/301E CT600 8,30 0,327 10 0,394 89 3,504 47 1,850 35 1,378 40 1,575 029865 SD0833/0.328/301A CT600 8,33 21/64 10 0,394 89 3,504 47 1,850 35 1,378 40 1,575 029866 SD0833/0.328/301E CT600 8,33 21/64 10 0,394 89 3,504 47 1,850 35 1,378 40 1,575 029867 SD0840/0.331/301A CT600 8,40 0,331 10 0,394 89 3,504 47 1,850 35 1,378 40 1,575 029868 SD0840/0.331/301E CT600 8,40 0,331 10 0,394 89 3,504 47 1,850 35 1,378 40 1,575 029869 SD0850/0.335/301A CT600 8,50 0,335 10 0,394 89 3,504 47 1,850 35 1,378 40 1,575 029870 SD0850/0.335/301E CT600 8,50 0,335 10 0,394 89 3,504 47 1,850 35 1,378 40 1,575 029871 SD0860/0.339/301A CT600 8,60 0,339 3/8-24 UF 10 0,394 89 3,504 47 1,850 35 1,378 40 1,575 029872 SD0860/0.339/301E CT600 8,60 0,339 3/8-24 UF 10 0,394 89 3,504 47 1,850 35 1,378 40 1,575 029873 SD0870/0.343/301A CT600 8,70 0,343 10 10 0,394 89 3,504 47 1,850 35 1,378 40 1,575 029874 SD0870/0.343/301E CT600 8,70 0,343 10 10 0,394 89 3,504 47 1,850 35 1,378 40 1,575 029875 SD0873/0.344/301A CT600 8,73 11/32 10 0,394 89 3,504 47 1,850 35 1,378 40 1,575 029876 SD0873/0.344/301E CT600 8,73 11/32 10 0,394 89 3,504 47 1,850 35 1,378 40 1,575 029877 SD0880/0.346/301A CT600 8,80 0,346 10 0,394 89 3,504 47 1,850 35 1,378 40 1,575 029878 SD0880/0.346/301E CT600 8,80 0,346 10 0,394 89 3,504 47 1,850 35 1,378 40 1,575 029879 SD0890/0.350/301A CT600 8,90 0,350 F10x1,25 10 0,394 89 3,504 47 1,850 35 1,378 40 1,575 029880 SD0890/0.350/301E CT600 8,90 0,350 F10x1,25 10 0,394 89 3,504 47 1,850 35 1,378 40 1,575 029881 SD0900/0.354/301A CT600 9,00 0,354 10 0,394 89 3,504 47 1,850 35 1,378 40 1,575 029882 SD0900/0.354/301E CT600 9,00 0,354 10 0,394 89 3,504 47 1,850 35 1,378 40 1,575 029883 SD0910/0.358/301A CT600 9,10 0,358 10 0,394 89 3,504 47 1,850 35 1,378 40 1,575 029884 SD0910/0.358/301E CT600 9,10 0,358 10 0,394 89 3,504 47 1,850 35 1,378 40 1,575 029885 SD0913/0.359/301A CT600 9,13 23/64 10 0,394 89 3,504 47 1,850 35 1,378 40 1,575 029886 SD0913/0.359/301E CT600 9,13 23/64 10 0,394 89 3,504 47 1,850 35 1,378 40 1,575 029887 SD0920/0.362/301A CT600 9,20 0,362 10 0,394 89 3,504 47 1,850 35 1,378 40 1,575 029888 SD0920/0.362/301E CT600 9,20 0,362 10 0,394 89 3,504 47 1,850 35 1,378 40 1,575 029889 SD0930/0.366/301A CT600 9,30 0,366 10 0,394 89 3,504 47 1,850 35 1,378 40 1,575 029890 SD0930/0.366/301E CT600 9,30 0,366 10 0,394 89 3,504 47 1,850 35 1,378 40 1,575 aterial Designations Unalloyed Steels Stainless Steels K Cast Irons S igh Temp. Alloys 8 Stainless ard aterials

140º Series 301Continued.. d 1 d 2 l 3 l 4 l 2 l 1 ARDCORE Drill Series 301 ED# Description Grade Drill Drill d Drills for d 2 Diameter Diameter 2 mm l inch 1 l 1 l 2 l 2 l 3 l 3 l 4 l 4 Threads Shank mm inch mm inch mm inch mm inch d 1 mm m 7 d 1 inch m 7 Shank 029891 SD0940/0.370/301A CT600 9,40 0,370 10 0,394 89 3,504 47 1,850 35 1,378 40 1,575 029892 SD0940/0.370/301E CT600 9,40 0,370 10 0,394 89 3,504 47 1,850 35 1,378 40 1,575 029893 SD0950/0.374/301A CT600 9,50 0,374 10 0,394 89 3,504 47 1,850 35 1,378 40 1,575 029894 SD0950/0.374/301E CT600 9,50 0,374 10 0,394 89 3,504 47 1,850 35 1,378 40 1,575 029895 SD0952/0.375/301A CT600 9,52 3/8 10 0,394 89 3,504 47 1,850 35 1,378 40 1,575 029896 SD0952/0.375/301E CT600 9,52 3/8 10 0,394 89 3,504 47 1,850 35 1,378 40 1,575 029897 SD0960/0.378/301A CT600 9,60 0,378 10 0,394 89 3,504 47 1,850 35 1,378 40 1,575 029898 SD0960/0.378/301E CT600 9,60 0,378 10 0,394 89 3,504 47 1,850 35 1,378 40 1,575 029899 SD0970/0.382/301A CT600 9,70 0,382 10 0,394 89 3,504 47 1,850 35 1,378 40 1,575 029900 SD0970/0.382/301E CT600 9,70 0,382 10 0,394 89 3,504 47 1,850 35 1,378 40 1,575 029901 SD0980/0.386/301A CT600 9,80 0,386 10 0,394 89 3,504 47 1,850 35 1,378 40 1,575 029902 SD0980/0.386/301E CT600 9,80 0,386 10 0,394 89 3,504 47 1,850 35 1,378 40 1,575 029903 SD0990/0.390/301A CT600 9,90 0,390 10 0,394 89 3,504 47 1,850 35 1,378 40 1,575 029904 SD0990/0.390/301E CT600 9,90 0,390 10 0,394 89 3,504 47 1,850 35 1,378 40 1,575 029905 SD0992/0.391/301A CT600 9,92 25/64 10 0,394 89 3,504 47 1,850 35 1,378 40 1,575 029906 SD0992/0.391/301E CT600 9,92 25/64 10 0,394 89 3,504 47 1,850 35 1,378 40 1,575 029907 SD1000/0.394/301A CT600 10,00 0,394 7/16-20 UF 10 0,394 89 3,504 47 1,850 35 1,378 40 1,575 029908 SD1000/0.394/301E CT600 10,00 0,394 7/16-20 UF 10 0,394 89 3,504 47 1,850 35 1,378 40 1,575 029909 SD1010/0.398/301A CT600 10,10 0,398 12 0,472 102 4,016 55 2,165 40 1,575 45 1,772 029910 SD1010/0.398/301E CT600 10,10 0,398 12 0,472 102 4,016 55 2,165 40 1,575 45 1,772 029911 SD1020/0.402/301A CT600 10,20 0,402 12 0,472 102 4,016 55 2,165 40 1,575 45 1,772 029912 SD1020/0.402/301E CT600 10,20 0,402 12 0,472 102 4,016 55 2,165 40 1,575 45 1,772 029913 SD1030/0.406/301A CT600 10,30 0,406 12 0,472 102 4,016 55 2,165 40 1,575 45 1,772 029914 SD1030/0.406/301E CT600 10,30 0,406 12 0,472 102 4,016 55 2,165 40 1,575 45 1,772 029915 SD1032/0.407/301A CT600 10,32 13/32 12 0,472 102 4,016 55 2,165 40 1,575 45 1,772 029916 SD1032/0.407/301E CT600 10,32 13/32 12 0,472 102 4,016 55 2,165 40 1,575 45 1,772 029917 SD1040/0.409/301A CT600 10,40 0,409 12 0,472 102 4,016 55 2,165 40 1,575 45 1,772 029918 SD1040/0.409/301E CT600 10,40 0,409 12 0,472 102 4,016 55 2,165 40 1,575 45 1,772 029919 SD1050/0.413/301A CT600 10,50 0,413 12 0,472 102 4,016 55 2,165 40 1,575 45 1,772 029920 SD1050/0.413/301E CT600 10,50 0,413 12 0,472 102 4,016 55 2,165 40 1,575 45 1,772 029921 SD1060/0.417/301A CT600 10,60 0,417 12 0,472 102 4,016 55 2,165 40 1,575 45 1,772 029922 SD1060/0.417/301E CT600 10,60 0,417 12 0,472 102 4,016 55 2,165 40 1,575 45 1,772 029923 SD1070/0.421/301A CT600 10,70 0,421 F12x1,5 12 0,472 102 4,016 55 2,165 40 1,575 45 1,772 029924 SD1070/0.421/301E CT600 10,70 0,421 F12x1,5 12 0,472 102 4,016 55 2,165 40 1,575 45 1,772 029925 SD1080/0.425/301A CT600 10,80 0,425 12 0,472 102 4,016 55 2,165 40 1,575 45 1,772 029926 SD1080/0.425/301E CT600 10,80 0,425 12 0,472 102 4,016 55 2,165 40 1,575 45 1,772 029927 SD1090/0.429/301A CT600 10,90 0,429 12 0,472 102 4,016 55 2,165 40 1,575 45 1,772 029928 SD1090/0.429/301E CT600 10,90 0,429 12 0,472 102 4,016 55 2,165 40 1,575 45 1,772 029929 SD1100/0.433/301A CT600 11,00 0,433 12 0,472 102 4,016 55 2,165 40 1,575 45 1,772 029930 SD1100/0.433/301E CT600 11,00 0,433 12 0,472 102 4,016 55 2,165 40 1,575 45 1,772 aterial Designations Unalloyed Steels Stainless Steels K Cast Irons S igh Temp. Alloys Stainless ard aterials 9

140º Series 301Continued.. d 1 d 2 l 3 l 4 l 2 l 1 ARDCORE Drill Series 301 ED# Description Grade Drill Drill d Drills for d 2 Diameter Diameter 2 mm l inch 1 l 1 l 2 l 2 l 3 l 3 l 4 l 4 Threads Shank mm inch mm inch mm inch mm inch d 1 mm m 7 d 1 inch m 7 Shank 029931 SD1110/0.437/301A CT600 11,10 0,437 12 0,472 102 4,016 55 2,165 40 1,575 45 1,772 029932 SD1110/0.437/301E CT600 11,10 0,437 12 0,472 102 4,016 55 2,165 40 1,575 45 1,772 029933 SD1120/0.441/301A CT600 11,20 0,441 12 0,472 102 4,016 55 2,165 40 1,575 45 1,772 029934 SD1120/0.441/301E CT600 11,20 0,441 12 0,472 102 4,016 55 2,165 40 1,575 45 1,772 029935 SD1130/0.445/301A CT600 11,30 0,445 12 0,472 102 4,016 55 2,165 40 1,575 45 1,772 029936 SD1130/0.445/301E CT600 11,30 0,445 12 0,472 102 4,016 55 2,165 40 1,575 45 1,772 029937 SD1140/0.449/301A CT600 11,40 0,449 12 0,472 102 4,016 55 2,165 40 1,575 45 1,772 029938 SD1140/0.449/301E CT600 11,40 0,449 12 0,472 102 4,016 55 2,165 40 1,575 45 1,772 029939 SD1150/0.453/301A CT600 11,50 0,453 12 0,472 102 4,016 55 2,165 40 1,575 45 1,772 029940 SD1150/0.453/301E CT600 11,50 0,453 12 0,472 102 4,016 55 2,165 40 1,575 45 1,772 029941 SD1151/0.453/301A CT600 11,51 29/64 12 0,472 102 4,016 55 2,165 40 1,575 45 1,772 029942 SD1151/0.453/301E CT600 11,51 29/64 12 0,472 102 4,016 55 2,165 40 1,575 45 1,772 029943 SD1160/0.457/301A CT600 11,60 0,457 1/2-20 UF 12 0,472 102 4,016 55 2,165 40 1,575 45 1,772 029944 SD1160/0.457/301E CT600 11,60 0,457 1/2-20 UF 12 0,472 102 4,016 55 2,165 40 1,575 45 1,772 029945 SD1170/0.461/301A CT600 11,70 0,461 12 0,472 102 4,016 55 2,165 40 1,575 45 1,772 029946 SD1170/0.461/301E CT600 11,70 0,461 12 0,472 102 4,016 55 2,165 40 1,575 45 1,772 029947 SD1180/0.465/301A CT600 11,80 0,465 12 0,472 102 4,016 55 2,165 40 1,575 45 1,772 029948 SD1180/0.465/301E CT600 11,80 0,465 12 0,472 102 4,016 55 2,165 40 1,575 45 1,772 029949 SD1190/0.469/301A CT600 11,90 0,469 12 0,472 102 4,016 55 2,165 40 1,575 45 1,772 029950 SD1190/0.469/301E CT600 11,90 0,469 12 0,472 102 4,016 55 2,165 40 1,575 45 1,772 029951 SD1200/0.472/301A CT600 12,00 0,472 12 0,472 102 4,016 55 2,165 40 1,575 45 1,772 029952 SD1200/0.472/301E CT600 12,00 0,472 12 0,472 102 4,016 55 2,165 40 1,575 45 1,772 029953 SD1210/0.476/301A CT600 12,10 0,476 14 0,551 107 4,213 60 2,362 43 1,693 45 1,772 029954 SD1210/0.476/301E CT600 12,10 0,476 14 0,551 107 4,213 60 2,362 43 1,693 45 1,772 029955 SD1220/0.480/301A CT600 12,20 0,480 14 0,551 107 4,213 60 2,362 43 1,693 45 1,772 029956 SD1220/0.480/301E CT600 12,20 0,480 14 0,551 107 4,213 60 2,362 43 1,693 45 1,772 029957 SD1230/0.484/301A CT600 12,30 31/64 14 0,551 107 4,213 60 2,362 43 1,693 45 1,772 029958 SD1230/0.484/301E CT600 12,30 31/64 14 0,551 107 4,213 60 2,362 43 1,693 45 1,772 029959 SD1240/0.488/301A CT600 12,40 0,488 14 0,551 107 4,213 60 2,362 43 1,693 45 1,772 029960 SD1240/0.488/301E CT600 12,40 0,488 14 0,551 107 4,213 60 2,362 43 1,693 45 1,772 029961 SD1250/0.492/301A CT600 12,50 0,492 14 0,551 107 4,213 60 2,362 43 1,693 45 1,772 029962 SD1250/0.492/301E CT600 12,50 0,492 14 0,551 107 4,213 60 2,362 43 1,693 45 1,772 029963 SD1260/0.496/301A CT600 12,60 0,496 14 0,551 107 4,213 60 2,362 43 1,693 45 1,772 029964 SD1260/0.496/301E CT600 12,60 0,496 14 0,551 107 4,213 60 2,362 43 1,693 45 1,772 029965 SD1270/0.500/301A CT600 12,70 1/2 14 0,551 107 4,213 60 2,362 43 1,693 45 1,772 029966 SD1270/0.500/301E CT600 12,70 1/2 14 0,551 107 4,213 60 2,362 43 1,693 45 1,772 029967 SD1280/0.504/301A CT600 12,80 0,504 14 0,551 107 4,213 60 2,362 43 1,693 45 1,772 029968 SD1280/0.504/301E CT600 12,80 0,504 14 0,551 107 4,213 60 2,362 43 1,693 45 1,772 029969 SD1290/0.508/301A CT600 12,90 0,508 14 0,551 107 4,213 60 2,362 43 1,693 45 1,772 029970 SD1290/0.508/301E CT600 12,90 0,508 14 0,551 107 4,213 60 2,362 43 1,693 45 1,772 aterial Designations Unalloyed Steels Stainless Steels K Cast Irons S igh Temp. Alloys 10 Stainless ard aterials

140º Series 301Continued.. d 1 d 2 l 3 l 4 l 2 l 1 ARDCORE Drill Series 301 ED# Description Grade Drill Drill d Drills for d 2 Diameter Diameter 2 mm l inch 1 l 1 l 2 l 2 l 3 l 3 l 4 l 4 Threads Shank mm inch mm inch mm inch mm inch d 1 mm m 7 d 1 inch m 7 Shank 029971 SD1300/0.512/301A CT600 13,00 0,512 14 0,551 107 4,213 60 2,362 43 1,693 45 1,772 029972 SD1300/0.512/301E CT600 13,00 0,512 14 0,551 107 4,213 60 2,362 43 1,693 45 1,772 029973 SD1310/0.516/301A CT600 13,10 0,516 14 0,551 107 4,213 60 2,362 43 1,693 45 1,772 029974 SD1310/0.516/301E CT600 13,10 0,516 14 0,551 107 4,213 60 2,362 43 1,693 45 1,772 029975 SD1320/0.520/301A CT600 13,20 0,520 14 0,551 107 4,213 60 2,362 43 1,693 45 1,772 029976 SD1320/0.520/301E CT600 13,20 0,520 14 0,551 107 4,213 60 2,362 43 1,693 45 1,772 029977 SD1330/0.524/301A CT600 13,30 0,524 14 0,551 107 4,213 60 2,362 43 1,693 45 1,772 029978 SD1330/0.524/301E CT600 13,30 0,524 14 0,551 107 4,213 60 2,362 43 1,693 45 1,772 029979 SD1340/0.528/301A CT600 13,40 0,528 14 0,551 107 4,213 60 2,362 43 1,693 45 1,772 029980 SD1340/0.528/301E CT600 13,40 0,528 14 0,551 107 4,213 60 2,362 43 1,693 45 1,772 029981 SD1350/0.531/301A CT600 13,50 0,531 14 0,551 107 4,213 60 2,362 43 1,693 45 1,772 029982 SD1350/0.531/301E CT600 13,50 0,531 14 0,551 107 4,213 60 2,362 43 1,693 45 1,772 029983 SD1360/0.535/301A CT600 13,60 0,535 14 0,551 107 4,213 60 2,362 43 1,693 45 1,772 029984 SD1360/0.535/301E CT600 13,60 0,535 14 0,551 107 4,213 60 2,362 43 1,693 45 1,772 029985 SD1370/0.539/301A CT600 13,70 0,539 14 0,551 107 4,213 60 2,362 43 1,693 45 1,772 029986 SD1370/0.539/301E CT600 13,70 0,539 14 0,551 107 4,213 60 2,362 43 1,693 45 1,772 029987 SD1380/0.543/301A CT600 13,80 0,543 14 0,551 107 4,213 60 2,362 43 1,693 45 1,772 029988 SD1380/0.543/301E CT600 13,80 0,543 14 0,551 107 4,213 60 2,362 43 1,693 45 1,772 029989 SD1389/0.547/301A CT600 13,89 35/64 14 0,551 107 4,213 60 2,362 43 1,693 45 1,772 029990 SD1389/0.547/301E CT600 13,89 35/64 14 0,551 107 4,213 60 2,362 43 1,693 45 1,772 029991 SD1400/0.551/301A CT600 14,00 0,551 14 0,551 107 4,213 60 2,362 43 1,693 45 1,772 029992 SD1400/0.551/301E CT600 14,00 0,551 14 0,551 107 4,213 60 2,362 43 1,693 45 1,772 029993 SD1410/0.555/301A CT600 14,10 0,555 16 0,630 115 4,528 65 2,559 45 1,772 48 1,890 029994 SD1410/0.555/301E CT600 14,10 0,555 16 0,630 115 4,528 65 2,559 45 1,772 48 1,890 029995 SD1420/0.559/301A CT600 14,20 0,559 16 0,630 115 4,528 65 2,559 45 1,772 48 1,890 029996 SD1420/0.559/301E CT600 14,20 0,559 16 0,630 115 4,528 65 2,559 45 1,772 48 1,890 029997 SD1429/0.562/301A CT600 14,29 9/16 16 0,630 115 4,528 65 2,559 45 1,772 48 1,890 029998 SD1429/0.562/301E CT600 14,29 9/16 16 0,630 115 4,528 65 2,559 45 1,772 48 1,890 029999 SD1430/0.563/301A CT600 14,30 0,563 16 0,630 115 4,528 65 2,559 45 1,772 48 1,890 030000 SD1430/0.563/301E CT600 14,30 0,563 16 0,630 115 4,528 65 2,559 45 1,772 48 1,890 030001 SD1440/0.567/301A CT600 14,40 0,567 16 0,630 115 4,528 65 2,559 45 1,772 48 1,890 030002 SD1440/0.567/301E CT600 14,40 0,567 16 0,630 115 4,528 65 2,559 45 1,772 48 1,890 030003 SD1450/0.571/301A CT600 14,50 0,571 16 0,630 115 4,528 65 2,559 45 1,772 48 1,890 030004 SD1450/0.571/301E CT600 14,50 0,571 16 0,630 115 4,528 65 2,559 45 1,772 48 1,890 030005 SD1460/0.575/301A CT600 14,60 0,575 16 0,630 115 4,528 65 2,559 45 1,772 48 1,890 030006 SD1460/0.575/301E CT600 14,60 0,575 16 0,630 115 4,528 65 2,559 45 1,772 48 1,890 030007 SD1470/0.579/301A CT600 14,70 0,579 16 0,630 115 4,528 65 2,559 45 1,772 48 1,890 030008 SD1470/0.579/301E CT600 14,70 0,579 16 0,630 115 4,528 65 2,559 45 1,772 48 1,890 030009 SD1480/0.583/301A CT600 14,80 0,583 16 0,630 115 4,528 65 2,559 45 1,772 48 1,890 030010 SD1480/0.583/301E CT600 14,80 0,583 16 0,630 115 4,528 65 2,559 45 1,772 48 1,890 aterial Designations Unalloyed Steels Stainless Steels K Cast Irons S igh Temp. Alloys Stainless ard aterials 11

140º Series 501 d 1 d 2 l 3 l 4 l 2 l 1 ARDCORE Drill Series 501 ED# Description Grade Drill Drill d Drills for d 2 Diameter Diameter 2 mm l inch 1 l 1 l 2 l 2 l 3 l 3 l 4 l 4 Threads Shank mm inch mm inch mm inch mm inch d 1 mm m 7 d 1 inch m 7 Shank 030037 SD0300/0.118/501A CT600 3,00 0,118 6 0,236 66 2,598 28 1,102 23 0,906 36 1,417 030038 SD0300/0.118/501E CT600 3,00 0,118 6 0,236 66 2,598 28 1,102 23 0,906 36 1,417 030039 SD0310/0.122/501A CT600 3,10 0,122 6 0,236 66 2,598 28 1,102 23 0,906 36 1,417 030040 SD0310/0.122/501E CT600 3,10 0,122 6 0,236 66 2,598 28 1,102 23 0,906 36 1,417 030041 SD0317/0.125/501A CT600 3,17 1/8 6 0,236 66 2,598 28 1,102 23 0,906 36 1,417 030042 SD0317/0.125/501E CT600 3,17 1/8 6 0,236 66 2,598 28 1,102 23 0,906 36 1,417 030043 SD0320/0.126/501A CT600 3,20 0,126 6 0,236 66 2,598 28 1,102 23 0,906 36 1,417 030044 SD0320/0.126/501E CT600 3,20 0,126 6 0,236 66 2,598 28 1,102 23 0,906 36 1,417 030045 SD0330/0.130/501A CT600 3,30 0,130 6 0,236 66 2,598 28 1,102 23 0,906 36 1,417 030046 SD0330/0.130/501E CT600 3,30 0,130 6 0,236 66 2,598 28 1,102 23 0,906 36 1,417 030047 SD0340/0.134/501A CT600 3,40 0,134 4 6 0,236 66 2,598 28 1,102 23 0,906 36 1,417 030048 SD0340/0.134/501E CT600 3,40 0,134 4 6 0,236 66 2,598 28 1,102 23 0,906 36 1,417 030049 SD0350/0.138/501A CT600 3,50 0,138 6 0,236 66 2,598 28 1,102 23 0,906 36 1,417 030050 SD0350/0.138/501E CT600 3,50 0,138 6 0,236 66 2,598 28 1,102 23 0,906 36 1,417 030051 SD0357/0.140/501A CT600 3,57 9/64 8-36 UF 6 0,236 66 2,598 28 1,102 23 0,906 36 1,417 030052 SD0357/0.140/501E CT600 3,57 9/64 8-36 UF 6 0,236 66 2,598 28 1,102 23 0,906 36 1,417 030053 SD0360/0.142/501A CT600 3,60 0,142 6 0,236 66 2,598 28 1,102 23 0,906 36 1,417 030054 SD0360/0.142/501E CT600 3,60 0,142 6 0,236 66 2,598 28 1,102 23 0,906 36 1,417 030055 SD0370/0.146/501A CT600 3,70 0,146 6 0,236 66 2,598 28 1,102 23 0,906 36 1,417 030056 SD0370/0.146/501E CT600 3,70 0,146 6 0,236 66 2,598 28 1,102 23 0,906 36 1,417 030057 SD0380/0.150/501A CT600 3,80 0,150 6 0,236 74 2,913 36 1,417 29 1,142 36 1,417 030058 SD0380/0.150/501E CT600 3,80 0,150 6 0,236 74 2,913 36 1,417 29 1,142 36 1,417 030059 SD0390/0.154/501A CT600 3,90 0,154 10-24 UC 6 0,236 74 2,913 36 1,417 29 1,142 36 1,417 030060 SD0390/0.154/501E CT600 3,90 0,154 10-24 UC 6 0,236 74 2,913 36 1,417 29 1,142 36 1,417 030061 SD0397/0.156/501A CT600 3,97 5/32 6 0,236 74 2,913 36 1,417 29 1,142 36 1,417 030062 SD0397/0.156/501E CT600 3,97 5/32 6 0,236 74 2,913 36 1,417 29 1,142 36 1,417 030063 SD0400/0.157/501A CT600 4,00 0,157 6 0,236 74 2,913 36 1,417 29 1,142 36 1,417 030064 SD0400/0.157/501E CT600 4,00 0,157 6 0,236 74 2,913 36 1,417 29 1,142 36 1,417 030065 SD0410/0.161/501A CT600 4,10 0,161 10-32 UF 6 0,236 74 2,913 36 1,417 29 1,142 36 1,417 030066 SD0410/0.161/501E CT600 4,10 0,161 10-32 UF 6 0,236 74 2,913 36 1,417 29 1,142 36 1,417 030067 SD0420/0.165/501A CT600 4,20 0,165 6 0,236 74 2,913 36 1,417 29 1,142 36 1,417 030068 SD0420/0.165/501E CT600 4,20 0,165 6 0,236 74 2,913 36 1,417 29 1,142 36 1,417 030069 SD0430/0.169/501A CT600 4,30 0,169 5 6 0,236 74 2,913 36 1,417 29 1,142 36 1,417 030070 SD0430/0.169/501E CT600 4,30 0,169 5 6 0,236 74 2,913 36 1,417 29 1,142 36 1,417 030071 SD0437/0.172/501A CT600 4,37 11/64 6 0,236 74 2,913 36 1,417 29 1,142 36 1,417 030072 SD0437/0.172/501E CT600 4,37 11/64 6 0,236 74 2,913 36 1,417 29 1,142 36 1,417 030073 SD0440/0.173/501A CT600 4,40 0,173 6 0,236 74 2,913 36 1,417 29 1,142 36 1,417 030074 SD0440/0.173/501E CT600 4,40 0,173 6 0,236 74 2,913 36 1,417 29 1,142 36 1,417 030075 SD0450/0.177/501A CT600 4,50 0,177 6 0,236 74 2,913 36 1,417 29 1,142 36 1,417 030076 SD0450/0.177/501E CT600 4,50 0,177 6 0,236 74 2,913 36 1,417 29 1,142 36 1,417 aterial Designations Unalloyed Steels Stainless Steels K Cast Irons S igh Temp. Alloys Stainless ard aterials 13

140º Series 501Continued.. d 1 d 2 l 3 l 4 l 2 l 1 ARDCORE Drill Series 501 ED# Description Grade Drill Drill d Drills for d 2 Diameter Diameter 2 mm l inch 1 l 1 l 2 l 2 l 3 l 3 l 4 l 4 Threads Shank mm inch mm inch mm inch mm inch d 1 mm m 7 d 1 inch m 7 Shank 030077 SD0460/0.181/501A CT600 4,60 0,181 6 0,236 74 2,913 36 1,417 29 1,142 36 1,417 030078 SD0460/0.181/501E CT600 4,60 0,181 6 0,236 74 2,913 36 1,417 29 1,142 36 1,417 030079 SD0470/0.185/501A CT600 4,70 0,185 6 0,236 74 2,913 36 1,417 29 1,142 36 1,417 030080 SD0470/0.185/501E CT600 4,70 0,185 6 0,236 74 2,913 36 1,417 29 1,142 36 1,417 030081 SD0476/0.187/501A CT600 4,76 3/16 6 0,236 82 3,228 44 1,732 35 1,378 36 1,417 030082 SD0476/0.187/501E CT600 4,76 3/16 6 0,236 82 3,228 44 1,732 35 1,378 36 1,417 030083 SD0480/0.189/501A CT600 4,80 0,189 12-32 UF 6 0,236 82 3,228 44 1,732 35 1,378 36 1,417 030084 SD0480/0.189/501E CT600 4,80 0,189 12-32 UF 6 0,236 82 3,228 44 1,732 35 1,378 36 1,417 030085 SD0490/0.193/501A CT600 4,90 0,193 6 0,236 82 3,228 44 1,732 35 1,378 36 1,417 030086 SD0490/0.193/501E CT600 4,90 0,193 6 0,236 82 3,228 44 1,732 35 1,378 36 1,417 030087 SD0500/0.197/501A CT600 5,00 0,197 6 0,236 82 3,228 44 1,732 35 1,378 36 1,417 030088 SD0500/0.197/501E CT600 5,00 0,197 6 0,236 82 3,228 44 1,732 35 1,378 36 1,417 030089 SD0510/0.201/501A CT600 5,10 0,201 6 6 0,236 82 3,228 44 1,732 35 1,378 36 1,417 030090 SD0510/0.201/501E CT600 5,10 0,201 6 6 0,236 82 3,228 44 1,732 35 1,378 36 1,417 030091 SD0516/0.203/501A CT600 5,16 13/64 6 0,236 82 3,228 44 1,732 35 1,378 36 1,417 030092 SD0516/0.203/501E CT600 5,16 13/64 6 0,236 82 3,228 44 1,732 35 1,378 36 1,417 030093 SD0520/0.205/501A CT600 5,20 0,205 6 0,236 82 3,228 44 1,732 35 1,378 36 1,417 030094 SD0520/0.205/501E CT600 5,20 0,205 6 0,236 82 3,228 44 1,732 35 1,378 36 1,417 030095 SD0530/0.209/501A CT600 5,30 0,209 1/4-20 UC 6 0,236 82 3,228 44 1,732 35 1,378 36 1,417 030096 SD0530/0.209/501E CT600 5,30 0,209 1/4-20 UC 6 0,236 82 3,228 44 1,732 35 1,378 36 1,417 030097 SD0540/0.213/501A CT600 5,40 0,213 6 0,236 82 3,228 44 1,732 35 1,378 36 1,417 030098 SD0540/0.213/501E CT600 5,40 0,213 6 0,236 82 3,228 44 1,732 35 1,378 36 1,417 030099 SD0550/0.217/501A CT600 5,50 0,217 6 0,236 82 3,228 44 1,732 35 1,378 36 1,417 030100 SD0550/0.217/501E CT600 5,50 0,217 6 0,236 82 3,228 44 1,732 35 1,378 36 1,417 030101 SD0556/0.219/501A CT600 5,56 7/32 1/4-28 UF 6 0,236 82 3,228 44 1,732 35 1,378 36 1,417 030102 SD0556/0.219/501E CT600 5,56 7/32 1/4-28 UF 6 0,236 82 3,228 44 1,732 35 1,378 36 1,417 030103 SD0560/0.220/501A CT600 5,60 0,220 6 0,236 82 3,228 44 1,732 35 1,378 36 1,417 030104 SD0560/0.220/501E CT600 5,60 0,220 6 0,236 82 3,228 44 1,732 35 1,378 36 1,417 030105 SD0570/0.224/501A CT600 5,70 0,224 6 0,236 82 3,228 44 1,732 35 1,378 36 1,417 030106 SD0570/0.224/501E CT600 5,70 0,224 6 0,236 82 3,228 44 1,732 35 1,378 36 1,417 030107 SD0580/0.228/501A CT600 5,80 0,228 6 0,236 82 3,228 44 1,732 35 1,378 36 1,417 030108 SD0580/0.228/501E CT600 5,80 0,228 6 0,236 82 3,228 44 1,732 35 1,378 36 1,417 030109 SD0590/0.232/501A CT600 5,90 0,232 6 0,236 82 3,228 44 1,732 35 1,378 36 1,417 030110 SD0590/0.232/501E CT600 5,90 0,232 6 0,236 82 3,228 44 1,732 35 1,378 36 1,417 030111 SD0595/0.234/501A CT600 5,95 15/64 6 0,236 82 3,228 44 1,732 35 1,378 36 1,417 030112 SD0595/0.234/501E CT600 5,95 15/64 6 0,236 82 3,228 44 1,732 35 1,378 36 1,417 030113 SD0600/0.236/501A CT600 6,00 0,236 6 0,236 82 3,228 44 1,732 35 1,378 36 1,417 030114 SD0600/0.236/501E CT600 6,00 0,236 6 0,236 82 3,228 44 1,732 35 1,378 36 1,417 030115 SD0610/0.240/501A CT600 6,10 0,240 8 0,315 91 3,583 53 2,087 43 1,693 36 1,417 030116 SD0610/0.240/501E CT600 6,10 0,240 8 0,315 91 3,583 53 2,087 43 1,693 36 1,417 aterial Designations Unalloyed Steels Stainless Steels K Cast Irons S igh Temp. Alloys 14 Stainless ard aterials

140º Series 501Continued.. d 1 d 2 l 3 l 4 l 2 l 1 ARDCORE Drill Series 501 ED# Description Grade Drill Drill d Drills for d 2 Diameter Diameter 2 mm l inch 1 l 1 l 2 l 2 l 3 l 3 l 4 l 4 Threads Shank mm inch mm inch mm inch mm inch d 1 mm m 7 d 1 inch m 7 Shank 030117 SD0620/0.244/501A CT600 6,20 0,244 8 0,315 91 3,583 53 2,087 43 1,693 36 1,417 030118 SD0620/0.244/501E CT600 6,20 0,244 8 0,315 91 3,583 53 2,087 43 1,693 36 1,417 030119 SD0630/0.248/501A CT600 6,30 0,248 8 0,315 91 3,583 53 2,087 43 1,693 36 1,417 030120 SD0630/0.248/501E CT600 6,30 0,248 8 0,315 91 3,583 53 2,087 43 1,693 36 1,417 030121 SD0635/0.250/501A CT600 6,35 1/4 8 0,315 91 3,583 53 2,087 43 1,693 36 1,417 030122 SD0635/0.250/501E CT600 6,35 1/4 8 0,315 91 3,583 53 2,087 43 1,693 36 1,417 030123 SD0640/0.252/501A CT600 6,40 0,252 8 0,315 91 3,583 53 2,087 43 1,693 36 1,417 030124 SD0640/0.252/501E CT600 6,40 0,252 8 0,315 91 3,583 53 2,087 43 1,693 36 1,417 030125 SD0650/0.256/501A CT600 6,50 0,256 8 0,315 91 3,583 53 2,087 43 1,693 36 1,417 030126 SD0650/0.256/501E CT600 6,50 0,256 8 0,315 91 3,583 53 2,087 43 1,693 36 1,417 030127 SD0660/0.260/501A CT600 6,60 0,260 8 0,315 91 3,583 53 2,087 43 1,693 36 1,417 030128 SD0660/0.260/501E CT600 6,60 0,260 8 0,315 91 3,583 53 2,087 43 1,693 36 1,417 030129 SD0670/0.264/501A CT600 6,70 0,264 5/18-18UF 8 0,315 91 3,583 53 2,087 43 1,693 36 1,417 030130 SD0670/0.264/501E CT600 6,70 0,264 5/18-18UF 8 0,315 91 3,583 53 2,087 43 1,693 36 1,417 030131 SD0675/0.266/501A CT600 6,75 17/64 8 0,315 91 3,583 53 2,087 43 1,693 36 1,417 030132 SD0675/0.266/501E CT600 6,75 17/64 8 0,315 91 3,583 53 2,087 43 1,693 36 1,417 030133 SD0680/0.268/501A CT600 6,80 0,268 8 0,315 91 3,583 53 2,087 43 1,693 36 1,417 030134 SD0680/0.268/501E CT600 6,80 0,268 8 0,315 91 3,583 53 2,087 43 1,693 36 1,417 030135 SD0690/0.272/501A CT600 6,90 0,272 8 8 0,315 91 3,583 53 2,087 43 1,693 36 1,417 030136 SD0690/0.272/501E CT600 6,90 0,272 8 8 0,315 91 3,583 53 2,087 43 1,693 36 1,417 030137 SD0700/0.276/501A CT600 7,00 0,276 8 0,315 91 3,583 53 2,087 43 1,693 36 1,417 030138 SD0700/0.276/501E CT600 7,00 0,276 8 0,315 91 3,583 53 2,087 43 1,693 36 1,417 030139 SD0710/0.280/501A CT600 7,10 0,280 F8x1 8 0,315 91 3,583 53 2,087 43 1,693 36 1,417 030140 SD0710/0.280/501E CT600 7,10 0,280 F8x1 8 0,315 91 3,583 53 2,087 43 1,693 36 1,417 030141 SD0714/0.281/501A CT600 7,14 9/32 8 0,315 91 3,583 53 2,087 43 1,693 36 1,417 030142 SD0714/0.281/501E CT600 7,14 9/32 8 0,315 91 3,583 53 2,087 43 1,693 36 1,417 030143 SD0720/0.283/501A CT600 7,20 0,283 8 0,315 91 3,583 53 2,087 43 1,693 36 1,417 030144 SD0720/0.283/501E CT600 7,20 0,283 8 0,315 91 3,583 53 2,087 43 1,693 36 1,417 030145 SD0730/0.287/501A CT600 7,30 0,287 8 0,315 91 3,583 53 2,087 43 1,693 36 1,417 030146 SD0730/0.287/501E CT600 7,30 0,287 8 0,315 91 3,583 53 2,087 43 1,693 36 1,417 030147 SD0740/0.291/501A CT600 7,40 0,291 8 0,315 91 3,583 53 2,087 43 1,693 36 1,417 030148 SD0740/0.291/501E CT600 7,40 0,291 8 0,315 91 3,583 53 2,087 43 1,693 36 1,417 030149 SD0750/0.295/501A CT600 7,50 0,295 8 0,315 91 3,583 53 2,087 43 1,693 36 1,417 030150 SD0750/0.295/501E CT600 7,50 0,295 8 0,315 91 3,583 53 2,087 43 1,693 36 1,417 030151 SD0754/0.297/501A CT600 7,54 19/64 8 0,315 91 3,583 53 2,087 43 1,693 36 1,417 030152 SD0754/0.297/501E CT600 7,54 19/64 8 0,315 91 3,583 53 2,087 43 1,693 36 1,417 030153 SD0760/0.299/501A CT600 7,60 0,299 8 0,315 91 3,583 53 2,087 43 1,693 36 1,417 030154 SD0760/0.299/501E CT600 7,60 0,299 8 0,315 91 3,583 53 2,087 43 1,693 36 1,417 030155 SD0770/0.303/501A CT600 7,70 0,303 8 0,315 91 3,583 53 2,087 43 1,693 36 1,417 030156 SD0770/0.303/501E CT600 7,70 0,303 8 0,315 91 3,583 53 2,087 43 1,693 36 1,417 aterial Designations Unalloyed Steels Stainless Steels K Cast Irons S igh Temp. Alloys Stainless ard aterials 15

140º Series 501Continued.. d 1 d 2 l 3 l 4 l 2 l 1 ARDCORE Drill Series 501 ED# Description Grade Drill Drill d Drills for d 2 Diameter Diameter 2 mm l inch 1 l 1 l 2 l 2 l 3 l 3 l 4 l 4 Threads Shank mm inch mm inch mm inch mm inch d 1 mm m 7 d 1 inch m 7 Shank 030157 SD0780/0.307/501A CT600 7,80 0,307 8 0,315 91 3,583 53 2,087 43 1,693 36 1,417 030158 SD0780/0.307/501E CT600 7,80 0,307 8 0,315 91 3,583 53 2,087 43 1,693 36 1,417 030159 SD0790/0.311/501A CT600 7,90 0,311 8 0,315 91 3,583 53 2,087 43 1,693 36 1,417 030160 SD0790/0.311/501E CT600 7,90 0,311 8 0,315 91 3,583 53 2,087 43 1,693 36 1,417 030161 SD0794/0.313/501A CT600 7,94 5/16 8 0,315 91 3,583 53 2,087 43 1,693 36 1,417 030162 SD0794/0.313/501E CT600 7,94 5/16 8 0,315 91 3,583 53 2,087 43 1,693 36 1,417 030163 SD0800/0.315/501A CT600 8,00 0,315 8 0,315 91 3,583 53 2,087 43 1,693 36 1,417 030164 SD0800/0.315/501E CT600 8,00 0,315 8 0,315 91 3,583 53 2,087 43 1,693 36 1,417 030165 SD0810/0.319/501A CT600 8,10 0,319 10 0,394 103 4,055 61 2,402 49 1,929 40 1,575 030166 SD0810/0.319/501E CT600 8,10 0,319 10 0,394 103 4,055 61 2,402 49 1,929 40 1,575 030167 SD0820/0.323/501A CT600 8,20 0,323 3/8-16 UC 10 0,394 103 4,055 61 2,402 49 1,929 40 1,575 030168 SD0820/0.323/501E CT600 8,20 0,323 3/8-16 UC 10 0,394 103 4,055 61 2,402 49 1,929 40 1,575 030169 SD0830/0.327/501A CT600 8,30 0,327 10 0,394 103 4,055 61 2,402 49 1,929 40 1,575 030170 SD0830/0.327/501E CT600 8,30 0,327 10 0,394 103 4,055 61 2,402 49 1,929 40 1,575 030171 SD0833/0.328/501A CT600 8,33 21/64 10 0,394 103 4,055 61 2,402 49 1,929 40 1,575 030172 SD0833/0.328/501E CT600 8,33 21/64 10 0,394 103 4,055 61 2,402 49 1,929 40 1,575 030173 SD0840/0.331/501A CT600 8,40 0,331 10 0,394 103 4,055 61 2,402 49 1,929 40 1,575 030174 SD0840/0.331/501E CT600 8,40 0,331 10 0,394 103 4,055 61 2,402 49 1,929 40 1,575 030175 SD0850/0.335/501A CT600 8,50 0,335 10 0,394 103 4,055 61 2,402 49 1,929 40 1,575 030176 SD0850/0.335/501E CT600 8,50 0,335 10 0,394 103 4,055 61 2,402 49 1,929 40 1,575 030177 SD0860/0.339/501A CT600 8,60 0,339 3/8-24 UF 10 0,394 103 4,055 61 2,402 49 1,929 40 1,575 030178 SD0860/0.339/501E CT600 8,60 0,339 3/8-24 UF 10 0,394 103 4,055 61 2,402 49 1,929 40 1,575 030179 SD0870/0.343/501A CT600 8,70 0,343 10 10 0,394 103 4,055 61 2,402 49 1,929 40 1,575 030180 SD0870/0.343/501E CT600 8,70 0,343 10 10 0,394 103 4,055 61 2,402 49 1,929 40 1,575 030181 SD0873/0.344/501A CT600 8,73 11/32 10 0,394 103 4,055 61 2,402 49 1,929 40 1,575 030182 SD0873/0.344/501E CT600 8,73 11/32 10 0,394 103 4,055 61 2,402 49 1,929 40 1,575 030183 SD0880/0.346/501A CT600 8,80 0,346 10 0,394 103 4,055 61 2,402 49 1,929 40 1,575 030184 SD0880/0.346/501E CT600 8,80 0,346 10 0,394 103 4,055 61 2,402 49 1,929 40 1,575 030185 SD0890/0.350/501A CT600 8,90 0,350 F10x1,25 10 0,394 103 4,055 61 2,402 49 1,929 40 1,575 030186 SD0890/0.350/501E CT600 8,90 0,350 F10x1,25 10 0,394 103 4,055 61 2,402 49 1,929 40 1,575 030187 SD0900/0.354/501A CT600 9,00 0,354 10 0,394 103 4,055 61 2,402 49 1,929 40 1,575 030188 SD0900/0.354/501E CT600 9,00 0,354 10 0,394 103 4,055 61 2,402 49 1,929 40 1,575 030189 SD0910/0.358/501A CT600 9,10 0,358 10 0,394 103 4,055 61 2,402 49 1,929 40 1,575 030190 SD0910/0.358/501E CT600 9,10 0,358 10 0,394 103 4,055 61 2,402 49 1,929 40 1,575 030191 SD0913/0.359/501A CT600 9,13 23/64 10 0,394 103 4,055 61 2,402 49 1,929 40 1,575 030192 SD0913/0.359/501E CT600 9,13 23/64 10 0,394 103 4,055 61 2,402 49 1,929 40 1,575 030193 SD0920/0.362/501A CT600 9,20 0,362 10 0,394 103 4,055 61 2,402 49 1,929 40 1,575 030194 SD0920/0.362/501E CT600 9,20 0,362 10 0,394 103 4,055 61 2,402 49 1,929 40 1,575 030195 SD0930/0.366/501A CT600 9,30 0,366 10 0,394 103 4,055 61 2,402 49 1,929 40 1,575 030196 SD0930/0.366/501E CT600 9,30 0,366 10 0,394 103 4,055 61 2,402 49 1,929 40 1,575 aterial Designations Unalloyed Steels Stainless Steels K Cast Irons S igh Temp. Alloys 16 Stainless ard aterials

140º Series 501Continued.. d 1 d 2 l 3 l 4 l 2 l 1 ARDCORE Drill Series 501 ED# Description Grade Drill Drill d Drills for d 2 Diameter Diameter 2 mm l inch 1 l 1 l 2 l 2 l 3 l 3 l 4 l 4 Threads Shank mm inch mm inch mm inch mm inch d 1 mm m 7 d 1 inch m 7 Shank 030197 SD0940/0.370/501A CT600 9,40 0,370 10 0,394 103 4,055 61 2,402 49 1,929 40 1,575 030198 SD0940/0.370/501E CT600 9,40 0,370 10 0,394 103 4,055 61 2,402 49 1,929 40 1,575 030199 SD0950/0.374/501A CT600 9,50 0,374 10 0,394 103 4,055 61 2,402 49 1,929 40 1,575 030200 SD0950/0.374/501E CT600 9,50 0,374 10 0,394 103 4,055 61 2,402 49 1,929 40 1,575 030201 SD0952/0.375/501A CT600 9,52 3/8 10 0,394 103 4,055 61 2,402 49 1,929 40 1,575 030202 SD0952/0.375/501E CT600 9,52 3/8 10 0,394 103 4,055 61 2,402 49 1,929 40 1,575 030203 SD0960/0.378/501A CT600 9,60 0,378 10 0,394 103 4,055 61 2,402 49 1,929 40 1,575 030204 SD0960/0.378/501E CT600 9,60 0,378 10 0,394 103 4,055 61 2,402 49 1,929 40 1,575 030205 SD0970/0.382/501A CT600 9,70 0,382 10 0,394 103 4,055 61 2,402 49 1,929 40 1,575 030206 SD0970/0.382/501E CT600 9,70 0,382 10 0,394 103 4,055 61 2,402 49 1,929 40 1,575 030207 SD0980/0.386/501A CT600 9,80 0,386 10 0,394 103 4,055 61 2,402 49 1,929 40 1,575 030208 SD0980/0.386/501E CT600 9,80 0,386 10 0,394 103 4,055 61 2,402 49 1,929 40 1,575 030209 SD0990/0.390/501A CT600 9,90 0,390 10 0,394 103 4,055 61 2,402 49 1,929 40 1,575 030210 SD0990/0.390/501E CT600 9,90 0,390 10 0,394 103 4,055 61 2,402 49 1,929 40 1,575 030211 SD0992/0.391/501A CT600 9,92 25/64 10 0,394 103 4,055 61 2,402 49 1,929 40 1,575 030212 SD0992/0.391/501E CT600 9,92 25/64 10 0,394 103 4,055 61 2,402 49 1,929 40 1,575 030213 SD1000/0.394/501A CT600 10,00 0,394 7/16-20 UF 10 0,394 103 4,055 61 2,402 49 1,929 40 1,575 030214 SD1000/0.394/501E CT600 10,00 0,394 7/16-20 UF 10 0,394 103 4,055 61 2,402 49 1,929 40 1,575 030215 SD1010/0.398/501A CT600 10,10 0,398 12 0,472 118 4,646 71 2,795 56 2,205 45 1,772 030367 SD1010/0.398/501E CT600 10,10 0,398 12 0,472 118 4,646 71 2,795 56 2,205 45 1,772 030216 SD1020/0.402/501A CT600 10,20 0,402 12 0,472 118 4,646 71 2,795 56 2,205 45 1,772 030217 SD1020/0.402/501E CT600 10,20 0,402 12 0,472 118 4,646 71 2,795 56 2,205 45 1,772 030218 SD1030/0.406/501A CT600 10,30 0,406 12 0,472 118 4,646 71 2,795 56 2,205 45 1,772 030219 SD1030/0.406/501E CT600 10,30 0,406 12 0,472 118 4,646 71 2,795 56 2,205 45 1,772 030220 SD1040/0.409/501A CT600 10,40 0,409 12 12 0,472 118 4,646 71 2,795 56 2,205 45 1,772 030221 SD1040/0.409/501E CT600 10,40 0,409 12 12 0,472 118 4,646 71 2,795 56 2,205 45 1,772 030222 SD1050/0.413/501A CT600 10,50 0,413 12 0,472 118 4,646 71 2,795 56 2,205 45 1,772 030223 SD1050/0.413/501E CT600 10,50 0,413 12 0,472 118 4,646 71 2,795 56 2,205 45 1,772 030224 SD1060/0.417/501A CT600 10,60 0,417 12 0,472 118 4,646 71 2,795 56 2,205 45 1,772 030225 SD1060/0.417/501E CT600 10,60 0,417 12 0,472 118 4,646 71 2,795 56 2,205 45 1,772 030226 SD1070/0.421/501A CT600 10,70 0,421 F12x1,5 12 0,472 118 4,646 71 2,795 56 2,205 45 1,772 030227 SD1070/0.421/501E CT600 10,70 0,421 F12x1,5 12 0,472 118 4,646 71 2,795 56 2,205 45 1,772 030228 SD1080/0.425/501A CT600 10,80 0,425 12 0,472 118 4,646 71 2,795 56 2,205 45 1,772 030229 SD1080/0.425/501E CT600 10,80 0,425 12 0,472 118 4,646 71 2,795 56 2,205 45 1,772 030230 SD1090/0.429/501A CT600 10,90 0,429 12 0,472 118 4,646 71 2,795 56 2,205 45 1,772 030231 SD1090/0.429/501E CT600 10,90 0,429 12 0,472 118 4,646 71 2,795 56 2,205 45 1,772 030232 SD1100/0.433/501A CT600 11,00 0,433 1/2-13 UC 12 0,472 118 4,646 71 2,795 56 2,205 45 1,772 030233 SD1100/0.433/501E CT600 11,00 0,433 1/2-13 UC 12 0,472 118 4,646 71 2,795 56 2,205 45 1,772 030234 SD1110/0.437/501A CT600 11,10 0,437 12 0,472 118 4,646 71 2,795 56 2,205 45 1,772 030235 SD1110/0.437/501E CT600 11,10 0,437 12 0,472 118 4,646 71 2,795 56 2,205 45 1,772 aterial Designations Unalloyed Steels Stainless Steels K Cast Irons S igh Temp. Alloys Stainless ard aterials 17

140º Series 501Continued.. d 1 d 2 l 3 l 4 l 2 l 1 ARDCORE Drill Series 501 ED# Description Grade Drill Drill d Drills for d 2 Diameter Diameter 2 mm l inch 1 l 1 l 2 l 2 l 3 l 3 l 4 l 4 Threads Shank mm inch mm inch mm inch mm inch d 1 mm m 7 d 1 inch m 7 Shank 030236 SD1120/0.441/501A CT600 11,20 0,441 12 0,472 118 4,646 71 2,795 56 2,205 45 1,772 030237 SD1120/0.441/501E CT600 11,20 0,441 12 0,472 118 4,646 71 2,795 56 2,205 45 1,772 030238 SD1130/0.445/501A CT600 11,30 0,445 12 0,472 118 4,646 71 2,795 56 2,205 45 1,772 030239 SD1130/0.445/501E CT600 11,30 0,445 12 0,472 118 4,646 71 2,795 56 2,205 45 1,772 030240 SD1140/0.449/501A CT600 11,40 0,449 12 0,472 118 4,646 71 2,795 56 2,205 45 1,772 030241 SD1140/0.449/501E CT600 11,40 0,449 12 0,472 118 4,646 71 2,795 56 2,205 45 1,772 030242 SD1150/0.453/501A CT600 11,50 0,453 12 0,472 118 4,646 71 2,795 56 2,205 45 1,772 030243 SD1150/0.453/501E CT600 11,50 0,453 12 0,472 118 4,646 71 2,795 56 2,205 45 1,772 030368 SD1160/0.457/501A CT600 11,60 0,457 1/2-20 UF 12 0,472 118 4,646 71 2,795 56 2,205 45 1,772 030244 SD1160/0.457/501E CT600 11,60 0,457 1/2-20 UF 12 0,472 118 4,646 71 2,795 56 2,205 45 1,772 030245 SD1170/0.461/501A CT600 11,70 0,461 12 0,472 118 4,646 71 2,795 56 2,205 45 1,772 030246 SD1170/0.461/501E CT600 11,70 0,461 12 0,472 118 4,646 71 2,795 56 2,205 45 1,772 030247 SD1180/0.465/501A CT600 11,80 0,465 12 0,472 118 4,646 71 2,795 56 2,205 45 1,772 030248 SD1180/0.465/501E CT600 11,80 0,465 12 0,472 118 4,646 71 2,795 56 2,205 45 1,772 030249 SD1190/0.469/501A CT600 11,90 0,469 12 0,472 118 4,646 71 2,795 56 2,205 45 1,772 030250 SD1190/0.469/501E CT600 11,90 0,469 12 0,472 118 4,646 71 2,795 56 2,205 45 1,772 030251 SD1200/0.472/501A CT600 12,00 0,472 12 0,472 118 4,646 71 2,795 56 2,205 45 1,772 030252 SD1200/0.472/501E CT600 12,00 0,472 12 0,472 118 4,646 71 2,795 56 2,205 45 1,772 030253 SD1210/0.476/501A CT600 12,10 0,476 14 0,551 124 4,882 77 3,031 60 2,362 45 1,772 030369 SD1210/0.476/501E CT600 12,10 0,476 14 0,551 124 4,882 77 3,031 60 2,362 45 1,772 030254 SD1220/0.480/501A CT600 12,20 0,480 14 0,551 124 4,882 77 3,031 60 2,362 45 1,772 030255 SD1220/0.480/501E CT600 12,20 0,480 14 0,551 124 4,882 77 3,031 60 2,362 45 1,772 030370 SD1230/0.484/501A CT600 12,30 0,484 14 0,551 124 4,882 77 3,031 60 2,362 45 1,772 030256 SD1230/0.484/501E CT600 12,30 0,484 14 0,551 124 4,882 77 3,031 60 2,362 45 1,772 030257 SD1240/0.488/501A CT600 12,40 0,488 14 0,551 124 4,882 77 3,031 60 2,362 45 1,772 030258 SD1240/0.488/501E CT600 12,40 0,488 14 0,551 124 4,882 77 3,031 60 2,362 45 1,772 030259 SD1250/0.492/501A CT600 12,50 0,492 14 0,551 124 4,882 77 3,031 60 2,362 45 1,772 030260 SD1250/0.492/501E CT600 12,50 0,492 14 0,551 124 4,882 77 3,031 60 2,362 45 1,772 030261 SD1260/0.496/501A CT600 12,60 0,496 14 0,551 124 4,882 77 3,031 60 2,362 45 1,772 030262 SD1260/0.496/501E CT600 12,60 0,496 14 0,551 124 4,882 77 3,031 60 2,362 45 1,772 030263 SD1270/0.500/501A CT600 12,70 0,500 14 0,551 124 4,882 77 3,031 60 2,362 45 1,772 030264 SD1270/0.500/501E CT600 12,70 0,500 14 0,551 124 4,882 77 3,031 60 2,362 45 1,772 030265 SD1280/0.504/501A CT600 12,80 0,504 14 0,551 124 4,882 77 3,031 60 2,362 45 1,772 030266 SD1280/0.504/501E CT600 12,80 0,504 14 0,551 124 4,882 77 3,031 60 2,362 45 1,772 030267 SD1290/0.508/501A CT600 12,90 0,508 14 0,551 124 4,882 77 3,031 60 2,362 45 1,772 030268 SD1290/0.508/501E CT600 12,90 0,508 14 0,551 124 4,882 77 3,031 60 2,362 45 1,772 030269 SD1300/0.512/501A CT600 13,00 0,512 14 0,551 124 4,882 77 3,031 60 2,362 45 1,772 030270 SD1300/0.512/501E CT600 13,00 0,512 14 0,551 124 4,882 77 3,031 60 2,362 45 1,772 030271 SD1310/0.516/501A CT600 13,10 0,516 14 0,551 124 4,882 77 3,031 60 2,362 45 1,772 030272 SD1310/0.516/501E CT600 13,10 0,516 14 0,551 124 4,882 77 3,031 60 2,362 45 1,772 aterial Designations Unalloyed Steels Stainless Steels K Cast Irons S igh Temp. Alloys 18 Stainless ard aterials

140º Series 501Continued.. d 1 d 2 l 3 l 4 l 2 l 1 ARDCORE Drill Series 501 ED# Description Grade Drill Drill d Drills for d 2 Diameter Diameter 2 mm l inch 1 l 1 l 2 l 2 l 3 l 3 l 4 l 4 Threads Shank mm inch mm inch mm inch mm inch d 1 mm m 7 d 1 inch m 7 Shank 030273 SD1320/0.520/501A CT600 13,20 0,520 14 0,551 124 4,882 77 3,031 60 2,362 45 1,772 030274 SD1320/0.520/501E CT600 13,20 0,520 14 0,551 124 4,882 77 3,031 60 2,362 45 1,772 030275 SD1330/0.524/501A CT600 13,30 0,524 14 0,551 124 4,882 77 3,031 60 2,362 45 1,772 030276 SD1330/0.524/501E CT600 13,30 0,524 14 0,551 124 4,882 77 3,031 60 2,362 45 1,772 030277 SD1340/0.528/501A CT600 13,40 0,528 14 0,551 124 4,882 77 3,031 60 2,362 45 1,772 030278 SD1340/0.528/501E CT600 13,40 0,528 14 0,551 124 4,882 77 3,031 60 2,362 45 1,772 030279 SD1350/0.531/501A CT600 13,50 0,531 14 0,551 124 4,882 77 3,031 60 2,362 45 1,772 030280 SD1350/0.531/501E CT600 13,50 0,531 14 0,551 124 4,882 77 3,031 60 2,362 45 1,772 030281 SD1360/0.535/501A CT600 13,60 0,535 14 0,551 124 4,882 77 3,031 60 2,362 45 1,772 030371 SD1360/0.535/501E CT600 13,60 0,535 14 0,551 124 4,882 77 3,031 60 2,362 45 1,772 030282 SD1370/0.539/501A CT600 13,70 0,539 14 0,551 124 4,882 77 3,031 60 2,362 45 1,772 030283 SD1370/0.539/501E CT600 13,70 0,539 14 0,551 124 4,882 77 3,031 60 2,362 45 1,772 030284 SD1380/0.543/501A CT600 13,80 0,543 14 0,551 124 4,882 77 3,031 60 2,362 45 1,772 030285 SD1380/0.543/501E CT600 13,80 0,543 14 0,551 124 4,882 77 3,031 60 2,362 45 1,772 030286 SD1390/0.547/501A CT600 13,90 0,547 14 0,551 124 4,882 77 3,031 60 2,362 45 1,772 030287 SD1390/0.547/501E CT600 13,90 0,547 14 0,551 124 4,882 77 3,031 60 2,362 45 1,772 030288 SD1400/0.551/501A CT600 14,00 0,551 14 0,551 124 4,882 77 3,031 60 2,362 45 1,772 030289 SD1400/0.551/501E CT600 14,00 0,551 14 0,551 124 4,882 77 3,031 60 2,362 45 1,772 030290 SD1410/0.555/501A CT600 14,10 0,555 16 0,630 133 5,236 83 3,268 63 2,480 48 1,890 030291 SD1410/0.555/501E CT600 14,10 0,555 16 0,630 133 5,236 83 3,268 63 2,480 48 1,890 030292 SD1420/0.559/501A CT600 14,20 0,559 16 0,630 133 5,236 83 3,268 63 2,480 48 1,890 030293 SD1420/0.559/501E CT600 14,20 0,559 16 0,630 133 5,236 83 3,268 63 2,480 48 1,890 030294 SD1430/0.563/501A CT600 14,30 0,563 16 0,630 133 5,236 83 3,268 63 2,480 48 1,890 030372 SD1430/0.563/501E CT600 14,30 0,563 16 0,630 133 5,236 83 3,268 63 2,480 48 1,890 030295 SD1440/0.567/501A CT600 14,40 0,567 16 0,630 133 5,236 83 3,268 63 2,480 48 1,890 030373 SD1440/0.567/501E CT600 14,40 0,567 16 0,630 133 5,236 83 3,268 63 2,480 48 1,890 030296 SD1450/0.571/501A CT600 14,50 0,571 16 0,630 133 5,236 83 3,268 63 2,480 48 1,890 030297 SD1450/0.571/501E CT600 14,50 0,571 16 0,630 133 5,236 83 3,268 63 2,480 48 1,890 030298 SD1460/0.575/501A CT600 14,60 0,575 16 0,630 133 5,236 83 3,268 63 2,480 48 1,890 030299 SD1460/0.575/501E CT600 14,60 0,575 16 0,630 133 5,236 83 3,268 63 2,480 48 1,890 030300 SD1470/0.579/501A CT600 14,70 0,579 16 0,630 133 5,236 83 3,268 63 2,480 48 1,890 030301 SD1470/0.579/501E CT600 14,70 0,579 16 0,630 133 5,236 83 3,268 63 2,480 48 1,890 030302 SD1480/0.583/501A CT600 14,80 0,583 16 0,630 133 5,236 83 3,268 63 2,480 48 1,890 030303 SD1480/0.583/501E CT600 14,80 0,583 16 0,630 133 5,236 83 3,268 63 2,480 48 1,890 030304 SD1490/0.587/501A CT600 14,90 0,587 16 0,630 133 5,236 83 3,268 63 2,480 48 1,890 030305 SD1490/0.587/501E CT600 14,90 0,587 16 0,630 133 5,236 83 3,268 63 2,480 48 1,890 030306 SD1500/0.591/501A CT600 15,00 0,591 16 0,630 133 5,236 83 3,268 63 2,480 48 1,890 030307 SD1500/0.591/501E CT600 15,00 0,591 16 0,630 133 5,236 83 3,268 63 2,480 48 1,890 030308 SD1510/0.594/501A CT600 15,10 0,594 16 0,630 133 5,236 83 3,268 63 2,480 48 1,890 030309 SD1510/0.594/501E CT600 15,10 0,594 16 0,630 133 5,236 83 3,268 63 2,480 48 1,890 aterial Designations Unalloyed Steels Stainless Steels K Cast Irons S igh Temp. Alloys Stainless ard aterials 19

Technical Information 21

Technical Data Recommended Cutting Conditions Speed V c and SF Cutting Speed v c (m/min) min-max/ SF min-max Family R m and V c ISO aterial ardness SF CT600 CT600 301 Series 501 Series max min max min Unalloyed Steels <600 /mm 2 V c 150 74 131 65 <180B SF 492 243 430 213 <950 /mm 2 V c 132 60 116 53 <280B SF 433 197 379 172 Alloyed Steels 700-950 /mm 2 V c 121 55 106 48 200-280 B SF 397 180 347 158 950-1200 /mm 2 V c 110 50 96 44 280-355 B SF 361 164 316 144 1200-1400 /mm 2 V c 75 34 66 30 355-415 B SF 247 112 216 98 Grey V c 150 68 132 60 GG-Ft SF 493 224 431 196 K Cast Irons ard Steels Chilled Cast Irons Spheroidal-Ductile V c 128 58 112 51 GGG-FGS SF 421 191 368 167 alleable V c 92 42 80 36 GTS - / SF 301 137 263 120 >1400 /mm 2 V c 61 28 53 24 >415 B SF 198 90 174 79 1400 /mm 2 V c 59 27 51 23 400 B SF 192 87 168 77 aterial Designations Unalloyed Steels Stainless Steels K Cast Irons S igh Temp. Alloys 22 Stainless ard aterials

Technical Data Recommended Cutting Conditions Feed etric and Inch etric ISO Family Rm and aterial ardness f n = mm/min -1 : min. & max. 3 4 5 6 7 8 9 10 11 12 13 14 15 16 Unalloyed Steels Alloyed Steels <600 /mm 2 0.050 0.063 0.075 0.087 0.098 0.110 0.120 0.131 0.141 0.152 0.162 0.171 0.181 0.191 <180B 0.130 0.168 0.206 0.243 0.279 0.314 0.349 0.384 0.419 0.453 0.487 0.520 0.553 0.586 <950 /mm 2 0.050 0.063 0.075 0.087 0.098 0.110 0.120 0.131 0.141 0.152 0.162 0.171 0.181 0.191 <280B 0.130 0.168 0.206 0.243 0.279 0.314 0.349 0.384 0.419 0.453 0.487 0.520 0.553 0.586 700-950 /mm 2 0.050 0.063 0.075 0.087 0.098 0.110 0.120 0.131 0.141 0.152 0.162 0.171 0.181 0.191 200-280 B 0.120 0.154 0.187 0.219 0.251 0.282 0.312 0.342 0.372 0.401 0.430 0.458 0.487 0.515 950-1200 /mm 2 0.050 0.061 0.071 0.081 0.090 0.099 0.108 0.116 0.124 0.132 0.140 0.147 0.154 0.161 280-355 B 0.110 0.140 0.170 0.198 0.226 0.253 0.280 0.306 0.332 0.357 0.383 0.407 0.432 0.456 1200-1400 /mm 2 0.050 0.059 0.068 0.076 0.083 0.090 0.097 0.103 0.109 0.115 0.121 0.126 0.131 0.137 355-415 B 0.090 0.113 0.135 0.157 0.177 0.197 0.217 0.236 0.254 0.273 0.291 0.309 0.326 0.343 Grey 0.080 0.102 0.123 0.144 0.164 0.184 0.204 0.223 0.241 0.260 0.278 0.296 0.314 0.332 GG-Ft 0.150 0.183 0.214 0.244 0.271 0.298 0.324 0.348 0.372 0.396 0.419 0.441 0.463 0.484 K Cast Irons ard Steels Chilled Cast Irons Spheroidal-Ductile 0.080 0.101 0.120 0.139 0.158 0.175 0.193 0.210 0.226 0.243 0.259 0.274 0.290 0.305 GGG-FGS 0.120 0.151 0.181 0.209 0.236 0.263 0.289 0.314 0.339 0.364 0.388 0.412 0.435 0.458 alleable 0.080 0.099 0.116 0.133 0.148 0.164 0.178 0.193 0.207 0.220 0.233 0.246 0.259 0.272 GTS - / 0.120 0.147 0.172 0.195 0.217 0.238 0.259 0.279 0.298 0.317 0.335 0.353 0.370 0.387 >1400 /mm 2 0.040 0.048 0.054 0.061 0.067 0.072 0.077 0.082 0.087 0.092 0.096 0.101 0.105 0.109 >415 B 0.080 0.100 0.118 0.135 0.152 0.169 0.184 0.200 0.215 0.229 0.244 0.258 0.272 0.286 1400 /mm 2 0.040 0.048 0.054 0.061 0.067 0.072 0.077 0.082 0.087 0.092 0.096 0.101 0.105 0.109 400 B 0.090 0.112 0.133 0.152 0.171 0.190 0.207 0.225 0.242 0.258 0.274 0.290 0.306 0.321 Inch ISO Family Rm and aterial ardness f n = Inch/rev. 0.118 0.157 0.197 0.236 0.276 0.315 0.354 0.394 0.433 0.472 0.512 0.551 0.591 0.630 Unalloyed Steels Alloyed Steels <600 /mm 2 0.0020 0.0025 0.0030 0.0034 0.0039 0.0043 0.0047 0.0052 0.0056 0.0060 0.0064 0.0068 0.0071 0.0075 <180B 0.0051 0.0066 0.0081 0.0096 0.0110 0.0124 0.0138 0.0151 0.0165 0.0178 0.0192 0.0205 0.0218 0.0231 <950 /mm 2 0.0020 0.0025 0.0030 0.0034 0.0039 0.0043 0.0047 0.0052 0.0056 0.0060 0.0064 0.0068 0.0071 0.0075 <280B 0.0051 0.0066 0.0081 0.0096 0.0110 0.0124 0.0138 0.0151 0.0165 0.0178 0.0192 0.0205 0.0218 0.0231 700-950 /mm 2 0.0020 0.0025 0.0030 0.0034 0.0039 0.0043 0.0047 0.0052 0.0056 0.0060 0.0064 0.0068 0.0071 0.0075 200-280 B 0.0047 0.0061 0.0074 0.0086 0.0099 0.0111 0.0123 0.0135 0.0146 0.0158 0.0169 0.0180 0.0192 0.0203 950-1200 /mm 2 0.0020 0.0024 0.0028 0.0032 0.0036 0.0039 0.0042 0.0046 0.0049 0.0052 0.0055 0.0058 0.0061 0.0064 280-355 B 0.0043 0.0055 0.0067 0.0078 0.0089 0.0100 0.0110 0.0121 0.0131 0.0141 0.0151 0.0160 0.0170 0.0180 1200-1400 /mm 2 0.0020 0.0023 0.0027 0.0030 0.0033 0.0035 0.0038 0.0041 0.0043 0.0045 0.0047 0.0050 0.0052 0.0054 355-415 B 0.0035 0.0045 0.0053 0.0062 0.0070 0.0078 0.0085 0.0093 0.0100 0.0107 0.0115 0.0122 0.0128 0.0135 Grey 0.0031 0.0040 0.0049 0.0057 0.0065 0.0072 0.0080 0.0088 0.0095 0.0102 0.0110 0.0117 0.0124 0.0131 GG-Ft 0.0059 0.0072 0.0084 0.0096 0.0107 0.0117 0.0127 0.0137 0.0147 0.0156 0.0165 0.0174 0.0182 0.0191 K Cast Irons ard Steels Chilled Cast Irons Spheroidal-Ductile 0.0031 0.0040 0.0047 0.0055 0.0062 0.0069 0.0076 0.0083 0.0089 0.0095 0.0102 0.0108 0.0114 0.0120 GGG-FGS 0.0047 0.0059 0.0071 0.0082 0.0093 0.0104 0.0114 0.0124 0.0134 0.0143 0.0153 0.0162 0.0171 0.0180 alleable 0.0031 0.0039 0.0046 0.0052 0.0058 0.0064 0.0070 0.0076 0.0081 0.0087 0.0092 0.0097 0.0102 0.0107 GTS - / 0.0047 0.0058 0.0068 0.0077 0.0085 0.0094 0.0102 0.0110 0.0117 0.0125 0.0132 0.0139 0.0146 0.0152 >1400 /mm 2 0.0016 0.0019 0.0021 0.0024 0.0026 0.0028 0.0030 0.0032 0.0034 0.0036 0.0038 0.0040 0.0041 0.0043 >415 B 0.0031 0.0039 0.0046 0.0053 0.0060 0.0066 0.0073 0.0079 0.0085 0.0090 0.0096 0.0102 0.0107 0.0112 1400 /mm 2 0.0016 0.0019 0.0021 0.0024 0.0026 0.0028 0.0030 0.0032 0.0034 0.0036 0.0038 0.0040 0.0041 0.0043 400 B 0.0035 0.0044 0.0052 0.0060 0.0067 0.0075 0.0082 0.0088 0.0095 0.0102 0.0108 0.0114 0.0120 0.0126 aterial Designations Unalloyed Steels Stainless Steels K Cast Irons S igh Temp. Alloys Stainless ard aterials 23

Drills Set Up Tool holding: Keep the total indicated run-out within 0,02mm (0.0008 inch) for drills with whistle notch shank. Drills with cylindrical shanks can be used with high precision collet chucks, hydraulic chucks or shrink fit holders. First choice is hydraulic chucks or shrink fit holders. For best result keep run-out < 0,02mm (0,0008 inch). Stability: The stability of the application is important to achieve the best performance in tool life and hole accuracy. Before starting with the drilling operation check the machine and spindle condition, the fixture of the drill and the clamping of the component to secure maximum stability and rigidity. 0,2 0,3 mm (0.078 0.011 inch) Coolant recommendation ole depth < 3 x D min. 8 10 bar ole depth > 3 x D min. 10 15 bar inimum recommended emulsion mix strength = 6% - 8%. For high temperature alloys and stainless steels minimum recommended emulsion mix strength = > 10%. 24

Operational guidelines Toolholding Run out tolerance Interrupted cut Requires prior drilling Adjusting Screw Spot face with an end mill prior to drilling. Thrust bearing type collet chuck holds the drill securely Runout 0,02 mm 0.0008 inch One rocess Lower feed when drilling interupted part. Drilling on inclined surfaces Inclined or curved surfaces recommend a lower feed rate than the standard value. Inclination angle of the workpiece surface (and the type of drill) have an influence on the feed reduction. By a max. surface inclination < 4 the feed needs to be reduced by 50%. ore inclined surfaces than > 4 must be pre-machined with a mill. Reduced feed > 6º 100% Feed Drilling on Turning achines When drilling on turning machines the drill must be on centre. The tolerance range of the centre position should not exceed ±0,01 mm (0.0004 inch). On bar-turning lathes do not drill into centre pips or test drill holes. Cut-off tools must be mounted precisely. 25

ower Requirement Guidelines ardcore: ower consumption for Alloyed Steel 300B 5.00 ower (KW) 4.50 4.00 3.50 3.00 2.50 2.00 1.50 1.00 0.50 0.00 4 6 8 10 12 14 Diameter (mm) Cutting Speeds: Vc 40 m/min Vc 60 m/min Vc 80 m/min Vc 110 m/min ardcore: ower consumption for Alloyed Steel 300B 7.00 6.00 ower () 5.00 4.00 3.00 2.00 Cutting Speeds: Vc 131fpm Vc 197fpm Vc 262fpm Vc 360fpm 1.00 0.00 0.20 0.25 0.30 0.35 0.40 0.45 0.50 Diameter (inch) aterial Designations Unalloyed Steels Stainless Steels K Cast Irons S igh Temp. Alloys 26 Stainless ard aterials

ower Requirement Guidelines ardcore: ower consumption for Grey Iron 200B 8.00 7.00 6.00 ower (KW) 5.00 4.00 3.00 2.00 Cutting Speeds: Vc 70 m/min Vc 90 m/min Vc 120 m/min Vc 150 m/min 1.00 0.00 4 6 8 10 12 14 Diameter (mm) ardcore: ower consumption for Grey Iron 200B ower () 10.00 9.00 8.00 7.00 6.00 5.00 4.00 3.00 2.00 1.00 0.00 0.20 0.25 0.30 0.35 0.40 0.45 0.50 Diameter (inch) Cutting Speeds: Vc 229fpm Vc 295fpm Vc 393fpm Vc 492fpm aterial Designations Unalloyed Steels Stainless Steels K Cast Irons S igh Temp. Alloys Stainless ard aterials 27

Troubleshooting Cutting edge build up Increase the cutting speed Increase the coolant concentration Regrinding Chipping on cutting face rove the machine spindle and tool holder quality Check the clamping and the fixture of the component Reduce the feed Reduce tool life change Regrinding eavy wear on chisel / centre chipping rove the machine spindle and tool holder quality Check the clamping and the fixture of the component Check the concentricity of the drill max.0,02mm (0.0008 inch) Reduce the feed during entrance Reduce the feed 28

Troubleshooting Continued.. isalignment / poor tolerance rove the machine spindle and tool holder quality Check the clamping and the fixture of the component Check the concentricity of the drill maximum 0,02 mm (0.0008 inch) Reduce feed during entrance Reduce feed Increase the coolant concentration and pressure Regrinding Chipping external corners rove the machine spindle and tool holder quality Check the clamping and the fixture of the component Increase the coolant concentration Reduce the cutting speed Reduce the feed during entrance Regrinding eriphery land wear rove the machine spindle and tool holder quality Check the clamping and the fixture of the component Check the concentricity of the drill maximum 0,02 mm (0.0008 inch) Increase the coolant concentration Reduce the cutting speed 29

Troubleshooting Continued.. Chipping at intersection, web thinning and cutting lip Check the concentricity of the drill maximum 0,02 mm (0.008 inch) roof the machine spindle and tool holder quality Regrinding eavy burr on breakthrough Reduce the feed Reduce tool life change Regrinding 30

Troubleshooting Continued.. Excessive flank wear Reduce the cutting speed Increase the feed rove the machine spindle and tool holder quality Check the clamping and the fixture of the component Increase the coolant concentration Ra oor surface quality rove the machine spindle and tool holder quality Check the clamping and the fixture of the component Increase the coolant concentration and pressure Check the concentricity of the drill max.0,02mm (0,0008 inch) 31

omenclature and Drilling Formulae Cutting speed (m/min) Vc = n x D x π SF = Vc x 3,28 1000 R (rev/min) n = Vc x 1000 π x D Feed (mm/rev) f = Vf Feed (inch/rev) = f (mm) n 25,4 Feed speed (mm/min) Vf = f x n aterial removal rate (cm 3 /min) Q = Vf x AT 1000 Cross section area of the hole (mm 2 ) AT = π x D 2 4 x sin k r Torque (m) c = f x kc x D2 x k c x sin k r 1000 8 ower requirement (KW) c = Q 6000 x achining time (min/piece) Tc = L + h Vf Legend: Kc = Specific cutting force (/mm 2 ) L = Drilling depth (mm) h = Safety Distance (mm) = achine efficiency (%) k r = oint Angle 2 32

Special Drills l 2 l 3 L l 1 R1 R2 w 1 d 1 d 2 d 3 D Ø Ø Ø Ø w 2 w 3 Choose between radius R 1 - R 2 or angle W 2 - W 3 Customer: Attn.: hone: Fax: Email: aterial to be machined: Int. Cooling Yes o o. of flutes: elix angle: Shank: Coating: Cylindrical: Weldon: Whistlenotch: ø D mm ø d1 mm ø d2 mm ø d3 mm L mm l1 mm l2 mm l3 mm R1 mm R2 mm W1 mm W2 mm W3 mm lease complete form and fax to Customer Services on USA - 800 223 2219 Canada - 800 432 6227 exico - 011 877 285 2505 33

aterials Cross Reference Chart Country/Standard aterial Group Rm ATI Allvac ATI Allegheny GERAY/ITALY U.K. FRACE USA (/mm 2 ) Designation Ludlum Designation W.-r. DI BS AFOR AIS/SAE Free cutting steel 390-710 1.0722 10Sb20 10bF2 Free cutting steel 410-710 1.0715 9Sn28 23007 S250 1213 Free cutting steel 410-710 1.0718 9Snb28 S250b 12L13 Free cutting steel 430-740 1.0736 9Sn36 24007 S300 1215 Free cutting steel 430-740 1.0737 9Snb36 S300b 12L14 eat treatable steel 500-650 1.0402 C22 050A20 CC20 1020 eat treatable steel 500-650 1.1158 Ck25 1025 Free cutting steel 510-740 1.0726 35S20 21236 35F4 1140 Superficial hardening steel 540-730 1.1183 Cf35 060A35 XC38TS 1035 eat treatable steel 550-750 1.0501 C35 060A35 CC35 1035 Case hardening steel 590-780 1.0401 C15 08015 CC12 1015 Case hardening steel 590-780 1.1141 Ck15 08015 XC12 1015 eat treatable steel 630-800 1.0503 C45 08046 CC45 1045 eat treatable steel 630-800 1.1191 Ck45 08046 XC42 1045 Superficial hardening steel 640-830 1.1213 Cf53 060A52 XC48TS 1050 Carbon tool steel 640-830 1.1545 C105W1 Y1105 W.110 eat treatable steel 640-840 1.1170 28n6 16028 205 1330 eat treatable steel 640-880 1.1167 36n5 405 1335 eat treatable steel 690-930 1.1157 40n4 15036 355 1039 Carbon tool steel 650-750 1.1663 C125W Y2120 W.112 eat treatable steel 700-900 1.0535 C55 07055 1055 eat treatable steel 700-900 1.1203 Ck55 07055 XC55 1055 eat treatable steel 750-900 1.0601 C60 080A62 CC55 1060 eat treatable steel 750-950 1.1221 Ck60 080A62 XC60 1060 Spring steel 1000-1100 1.1274 Ck101 060A96 1095 igh temp. constructional steel 440-570 1.5415 15o3 1501-240 15D3 AST A20Gr.A igh temp. constructional steel 440-590 1.7335 13Cro4 4 1501-620Gr.27 15CD3.5 AST A182 igh temp. constructional steel 440-590 1.7380 10Cro9 10 1501-622 12CD9;10 AST A182 igh temp. constructional steel 450-590 1.5423 16o5 1503-245- 420 4520 Tough at sub zero 490-640 1.5622 14i6 166 AST A350LF5 igh temp. constructional steel 490-640 1.7715 14oV6 3 1503-660- 440 Tough at sub zero 510-710 1.5680 12i19 Z185 2515 Case hardening steel 640-1080 1.7131 16nCr5 (52720) 16C5 5115 Case hardening steel 640-1080 1.7262 15Cro5 12CD4 Cold work tool steel 640-670 O1 O1 ot / cold tool steel 640-720 S7 S7 Tough at sub zero 640-840 1.5662 X8i9 1501-509;510 AST A353 Ball and roller bearing steel 650-750 1.3505 100Cr6 534A99 100C6 52100 eat treatable steel 650-950 1.7218 25Cro4 1717CDS 25CD4 4130 110 Case hardening steel 690-1080 1.6523 21iCro2 80520 20CD2 8620 Case hardening steel 690-880 1.7015 15Cr3 52315 12C3 5015 eat treatable steel 690-930 1.5710 36iCr6 640A35 35C6 3135 Superficial hardening steel 700-750 1.7045 42Cr4 5140 ATI etal aterial Designations Unalloyed Steels Stainless Steels K Cast Irons S igh Temp. Alloys 34 Stainless ard aterials

aterials Cross Reference Chart Country/Standard aterial Group Rm ATI Allvac ATI Allegheny GERAY/ITALY U.K. FRACE USA (/mm 2 ) Designation Ludlum Designation W.-r. DI BS AFOR AIS/SAE eat treatable steel 700-950 1.7033 34Cr4 530A32 32C4 5132 Cold work tool steel 720-775 A6 A6 Superficial hardening steel 740-1080 1.7223 41Cro4 70840 42CD4TS 4140;4142 eat treatable steel 750-1100 1.7220 34Cro4 708A37 35CD4 4137;4135 Cold work tool steel 750-775 O7 O7 Cold work tool steel 750-800 1.2542 45WSCrV7 BS1 S1 Cold work tool steel 750-850 1.2067 100Cr6 BL3 Y100C6 L3 Cold work tool steel 750-850 A2 1.2363 X100CroV51 BA2 Z100CDV5 A2 Cold work tool steel 750-850 1.2419 105WCr6 105WC13 Cold work tool steel 750-850 1.2833 100V1 BW2 Y1105V W210 igh speed steel 775-990 2 1.3343 S 6-5-2 B2 Z85WDCV 2 06-05-04-02 igh speed steel 775-990 1.3348 S 2-9-2 Z100WCWV 09-04-02-02 7 eat treatable steel 780-1080 1.3401 X120n12 Z12012 Z12012 Superficial hardening steel 780-1180 1.8159 50CrV4 735A50 50CV4 6150 igh speed steel 795-870 3 3 Cold work tool steel 795-910 A7 A7 igh speed steel 800-1050 1.3355 S 18-0-1 BT1 Z80WCV 18-04-01 T1 eat treatable steel 800-1100 1.6511 36Crio4 81640 40CD3 9840 eat treatable steel 800-1100 1.7035 41Cr4 53040 42C4 5140 eat treatable steel 800-1200 1.7225 42Cro4 70840 42CD4 4140 Cold work tool steel 800-850 1.2713 55iCroV6 55CDV7 L6 igh speed steel 820-1050 1.3243 S 6-5-2-5 Z85WDKCV 06-05-05-04-02 igh speed steel 820-1050 1.3255 S 18-1-2-5 BT4 Z80WKCV 18-05-04-01 T4 Case hardening steel 830-1180 1.5732 14iCr10 14C11 3415 Cold work tool steel 850-900 D2 1.2379 X155CrVo12-1 BD2 Z160CDV12 D2 Cold work tool steel 850-900 1.2080 X210Cr12 BD3 Z200Cr12 D3 Cold work tool steel 850-900 1.2436 X210CrW12 Cold work tool steel 850-900 1.2601 X165CroV12 Case hardening steel 880-1230 1.5752 14iCr14 65513 12C15 3415 ickelvac eat treatable steel 900-1200 4340 1.6582 34Crio6 81740 35CD6 4340 itriding steel 950-1000 1.8509 41CrAIo7 90539 40CAD6, 12 Spring steel 950-1050 1.0904 55Si7 250A53 55S7 9255 Case hardening steel 980-1320 1.6587 17Crio6 820A16 18CD6 eat treatable steel 980-1420 1.7361 32Cro12 72224 30CD12 Spring steel 1050-1100 1.7176 55Cr3 527A60 55C3 5155 Spring steel 1050-1100 1.0961 60SiCr7 60SC7 9262 itriding steel 1080-1270 1.2606 39CroV13 9 B12 12 ot work tool steel 1180-1570 1.2343 B11 11 ot work tool steel 1180-1670 1.2365 B10 10 ot work tool steel 1180-1770 13 1.2344 X40CroV51 B13 Z40CDV5 13 ot work tool steel 1180-1770 1.2581 X30WCrV9 3 B21 Z30WCV9 21 ot work tool steel 1270-1670 1.2678 B19 19 ATI etal aterial Designations Unalloyed Steels Stainless Steels K Cast Irons S igh Temp. Alloys Stainless ard aterials 35

aterials Cross Reference Chart Country/Standard aterial Group Rm ATI Allvac ATI Allegheny GERAY/ITALY U.K. FRACE USA (/mm 2 ) Designation Ludlum Designation W.-r. DI AFOR AS Stainless steel 400-600 ickelvac 410 / 403 AL 403 1.4000 X6Cr13 403S17 Z6C13 403 eat resistant steel casting 400-600 1.4865 G-X40iCrSi38 18 330C11 Stainless steel casting 440-640 1.4308 G-X6Cri18 9 304C15 Z6C18.10 Stainless steel casting 440-640 1.4408 G-X6Crio18 10 316C16 Stainless steel casting 440-640 1.4581 G-X7Criob18 10 318C17 Z4CDb18 12 eat resistant steel 450-650 AL 405 1.4724 X10CrAI13 403S17 Z10C13 405 ickelvac Stainless steel 450-650 410 / 403 AL 410 1.4006 X10Cr13 410S21 Z10C14 410 Stainless steel 450-650 AL 430 1.4016 X6Cr17 430S15 Z8C17 430 Stainless steel 450-650 AL 434 1.4113 X6Cro17 434S17 Z8CD17.01 434 Stainless steel 460-680 AL 304L 1.4306 X2Cri19 11 304S12 Z3C18.10 304L Stainless steel 490-690 AL 305 1.4303 X5Cri18 12 305 Stainless steel 490-690 Allvac 316 L AL 316L 1.4435 X2Crio18 12 316S12 Z2CD17.13 316L Stainless steel 490-690 AL 317L 1.4438 X2Crio18 16 317S12 Z2CD19.15 317L Stainless steel 490-740 1.4583 X10Criob18 12 Z6CDb17 13B 318 Stainless steel 500-550 E-Brite Alloy AST A240 Stainless steel 500-700 AL 303 1.4305 X10CriS18 9 303S21 Z10CF 18.09 303 Stainless steel 500-700 AL 304 1.4301 X5Cri18 10 304S15 Z6C18.09 304 Stainless steel 500-730 AL 321 1.4541 X6CriTi18 10 2337 Z6CT18.10 321 Stainless steel 500-730 1.4571 X6CrioTi17 12 2 320S17 Z6DT17.12 316Ti eat resistant steel 500-750 AL 309 1.4828 X15CriSi20 12 309S24 Z15CS20.12 309 eat resistant steel 500-750 AL 310S 1.4845 X12Cri25 21 310S24 Z12C25 20 310S Stainless steel 500-750 AL 904L 1.4539 AST B625 eat resistant steel 500-750 1.4878 X12CriTi18 9 321S320 Z6CT18.12B Stainless steel 510-710 AL 316 1.4401 X5Crio18 10 316S16 Z6CD17.11 316 Stainless steel 510-740 AL 347 1.4550 X6Crib18 10 347S17 Z6Cb18.10 347 eat resistant steel 520-720 1.4762 X10CrAI 24 Z10CAS24 446 Stainless steel 550-760 1.4311 X2Cri18 10 304S62 Z2C18.10 304L eat resistant steel 550-800 1.4841 X15CriSi25 20 310 eat resistant steel 550-800 1.4864 X12iCrSi36 16 Z12CS35.16 330 Stainless steel 580-800 AL 316LX 1.4429 X2Crio17 13 3 Z2CD17.13 316L Stainless steel 590-780 AL 416 1.4005 X12CrS13 416 Stainless steel 640-840 1.4104 X12CroS17 Z10CF17 430F Stainless steel 640-900 1.4460 X8Crio27 5 329 Stainless steel 700-800 1.4034 X45Cr13 420S45 Z40C Z38C13 Stainless steel 700-950 AL 301 1.4310 X12Cri17 7 Z12C17.07 301 Stainless steel 750-800 1.4027 G-X20Cr14 420C29 Z20C13 Stainless steel 750-950 AL 420 1.4021 X20Cr13 420 Stainless steel casting 760-960 1.4313 X5Cri13 4 425C11 Z4CD13.4 Stainless steel 800-900 AL 2205 AST A240 Stainless steel 850-950 1.4057 X20Cri172 431S29 Z15Ci6.02 431 Stainless steel 1100-1200 A 350 AST A693 recipitation hardening stainless AL 13-8 13-8 ickelvac recipitation hardening stainless 15-5 AL 15-5 1.4540 X4CriCub164 Z6CU15.05 15-5 recipitation hardening stainless AL 15-7 1.4532 X7CrioAl157 Z8CDA15.07 15-7 ickelvac recipitation hardening stainless 17-4 AL 17-4 1.4542 X5CriCub174 Z6CU17.04 17-4 recipitation hardening stainless AL 17-7 1.4568 X7CriAl177 Z8CA17.07 17-7 ATI etal aterial Designations Unalloyed Steels Stainless Steels K Cast Irons S igh Temp. Alloys 36 Stainless ard aterials

aterials Cross Reference Chart Cr i C n Si S o Cu Ti Others 12.0 0.15 0.5 0.50 0.02 0.01 18.8 38.0 0.4 1.0 1.75 0.045 0.03 W 4.75 19.0 10.0 0.07 1.5 2.0 0.045 0.03 19.0 11.0 0.07 1.5 1.5 0.045 0.03 2.5 19.0 11.5 0.06 1.5 1.5 0.045 0.03 2.25 12.0 0.08 1.0 0.50 0.04 0.03 Al 0.10-0.30 12.0 0.15 0.5 0.50 0.02 0.01 0.5 0.5 16.0 0.08 1.0 1.0 0.04 0.03 17.0 0.08 0.75 19.0 10.0 0.015 1.0 0.5 0.023 0.015 18.0 11.5 0.12 2.0 1.0 0.04 0.03 17.0 12.0 0.015 1.0 0.5 0.023 0.015 2.5 19.0 13.0 0.015 1.0 1.0 0.023 0.015 3.5 18.0 14.0 0.08 2.0 2.0 26 0.003 1 19.5 10.5 0.16 1.5 2.0 0.04 0.3 0.6 19.5 9.0 0.08 1.5 2.0 0.04 0.04 18.0 9.5 0.08 2.0 1.0 0.04 0.03 0.40 17.5 12.0 0.08 2.0 1.0 0.045 0.03 2.25 5.0 23.5 14.0 0.20 1.5 2.0 0.04 0.04 25.0 20.5 0.15 2.0 0.75 0.045 0.03 20.5 4.5 1.5 18.0 10.5 0.12 2.0 1.0 0.045 0.03 0.40 Al 0.40 17.0 13.0 0.08 2.0 0.75 0.04 0.03 1.5 0.50 18.0 11.0 0.08 2.0 1.0 0.045 0.03 25.0 0.12 1.0 1.0 0.04 0.03 Al 1.50 18.0 10.0 0.03 2.0 1.0 0.045 0.03 0.16 24.5 20.5 0.18 2.0 1.5 0.04 0.03 0.5 0.5 15.0 35.0 0.15 1.0 2.5 0.04 0.04 17.5 13.0 0.03 2.0 1.0 0.045 0.025 2.75 0.16 13.0 0.15 1.25 1.0 0.07 0.07 0.60 17.0 0.12 1.25 1.0 0.06 0.15 0.5 25.5 3.5 0.1 0.04 0.03 1.0 13.5 0.5 1.0 1.0 0.045 0.03 17.0 7.0 0.14 2.0 1.0 0.045 0.03 13.5 1.0 0.2 1.0 1.0 0.045 0.03 12.5 0.20 1.0 1.0 0.04 0.04 13.0 4.5 0.07 1.5 1.0 0.035 0.025 0.7 22 5.5 3 0.16 16.0 2.0 0.20 1.0 1.0 0.04 0.03 16.5 4.3 0.08 2.8 13 8 2.2 Al 1.2 14.8 4.5 0.03 0.5 0.5 0.02 0.015 3.5 Cb 0.3 15.0 7.0 0.045 0.5 0.5 0.02 0.015 2.5 Al 1.15 16.3 4.0 0.035 0.5 0.5 0.02 0.015 4.0 Cb 0.3 17.0 7.0 0.045 0.5 0.5 0.02 0.02 Al 1.15 aterial Designations Unalloyed Steels Stainless Steels K Cast Irons S igh Temp. Alloys Stainless ard aterials 37

aterials Cross Reference Chart Country/Standard aterial Group B ATI Allvac ATI Allegheny GERAY/ITALY U.K. FRACE USA Designation Ludlum Designation W.-r. DI BS AFOR AST/SAE Grey cast iron 175 0.6010 GG 10 Grade 100 Ft 10 D o 20 B Grey cast iron 185 0.6015 GG 15 Grade 150 Ft 15 D o 25 B Grey cast iron 205 0.6020 GG 20 Grade 220 Ft 20 D o 30 B Grey cast iron 220 0.6025 GG 25 Grade 260 Ft 25 D o 35 B Grey cast iron 230 0.6030 GG 30 Grade 300 R 30 D o 45 B Grey cast iron 235 0.6035 GG 35 Grade 350 Ft 35 D o 50 B Grey cast iron 250 0.6040 GG 40 Grade 400 Ft 40 D o 55 B Spheroidal / nodular/ ductile cast iron 150-180 GGG 35.3 350/22 FGS 350-22 60-40-18 Spheroidal / nodular/ ductile cast iron 155-220 0717-02 GGG 40 420/12 65-45-12 Spheroidal / nodular/ ductile cast iron 190-255 0727-02 GGG 50 500/7 FGS 500-7 80-55-06 Spheroidal / nodular/ ductile cast iron 200-260 0732-03 GGG 60 600/3 FGS 600-3 80-60-03 Spheroidal / nodular/ ductile cast iron 240-300 0737-01 GGG 70 700/2 FGS 700-2 100-70-03 Spheroidal / nodular/ ductile cast iron 265-300 GGG 80 900/2 FGS 900-2 120-90-02 alleable cast iron 150 GTS-35-10 B 340/12 35-1 32510 alleable cast iron 175 0.8145 GTS-45-06 440/7 40010 alleable cast iron 205 0.8155 GTS-55-04 510/4 50-5 50005 alleable cast iron 230 0.8165 GTS-65-02 570/3 n 650-3 A220-70003 alleable cast iron 265 0.8170 GTS-70-02 690/2 n 700-2 A220-80002 Aluminium alloys 3.0255 Al99,9 1B A5 1050 Aluminium alloys 3.0515 Aln 3 Aluminium alloys 3.0615 AlgSib Aluminium alloys 3.1325 AlCug1 A-U4G 2017 Aluminium alloys 3.1355 AlCug2 L97 A-U4G1 2024 Aluminium alloys 3.1645 AlCugb Aluminium alloys 3.1655 AlCuBib FC1 A-U5bBi 2011 Aluminium alloys 3.2245 AlSi5 Aluminium alloys 3.2305 AlRgSi Aluminium alloys 3.2315 AlgSi1 30 6351 Aluminium alloys 3.3206 AlgSi0,5 9 6063 Aluminium alloys 3.3309 AlRg0,5 Aluminium alloys 3.3315 Alg1 41 A-G0,6 5005 Aluminium alloys 3.3316 Alg1,5 3L44 A-G1,5 5050 Aluminium alloys 3.3319 AlRg1 Aluminium alloys 3.3523 Alg2,5 2L56 A-G2,5C 5052 Aluminium alloys 3.3535 Alg3 5 A-G3 5754 Aluminium alloys 3.3545 Alg4n A-G4C 5086 Aluminium alloys 3.3547 ASlg4,5n 8 A-G4,5C 5083 Aluminium alloys 3.3549 Alg5 6 5056 Aluminium alloys 3.4365 AlZngCu1,5 DTD5074 A-Z5GU 7075 Aluminium alloys AlZng1 7005 Aluminium alloys Alg2,5n 51 A-G2,5C 5454 Aluminium alloys AlSi3,5 aterial Designations Unalloyed Steels Stainless Steels K Cast Irons S igh Temp. Alloys 38 Stainless ard aterials

aterials Cross Reference Chart Si Fe Cu n g Cr Zn Ti 0.25 0.4 0.05 0.05 0.05 0.07 0.05 0.5 0.7 0.1 1.2 0.3 0.1 0.2 0.1 1.0 0.5 0.1 0.7 0.9 0.3 0.3 0.2 0.5 0.7 4.0 0.7 0.7 0.1 0.25 0.5 0.5 4.3 0.6 1.5 0.1 0.25 0.15 0.8 0.8 4.0 0.75 1.1 0.1 0.8 0.2 0.4 0.7 5.5 0.3 5.0 0.4 0.05 0.1 0.1 0.2 0.25 0.55 0.15 0.02 0.45 0.15 1.0 0.5 0.1 0.6 0.9 0.25 0.2 0.1 0.45 0.15 0.1 0.1 0.45 0.05 0.15 0.1 0.01 0.008 0.35 0.01 0.008 0.3 0.45 0.05 0.15 0.9 0.1 0.2 0.4 0.45 0.05 0.15 1.5 0.1 0.2 0.1 0.008 1.00 0.01 0.008 0.25 0.4 0.1 0.1 2.5 0.2 0.1 0.4 0.4 0.1 0.5 3.1 0.3 0.2 0.15 0.4 0.5 0.1 0.45 4.0 0.15 0.25 0.15 0.4 0.4 0.1 0.7 4.5 0.15 0.25 0.15 0.2 0.35 0.15 0.35 4.5 0.1 0.25 0.1 0.4 0.5 1.6 0.3 2.5 0.23 5.5 0.2 0.35 0.4 0.1 0.45 1.4 0.13 4.5 0.03 0.4 0.4 0.05 0.75 2.7 0.1 0.1 0.15 4.5 0.04 aterial Designations Unalloyed Steels Stainless Steels K Cast Irons S igh Temp. Alloys Stainless ard aterials 39

aterials Cross Reference Chart Country/Standard aterial Group Commercial ATI Allvac ATI Allegheny GERAY/ITALY U.K. FRACE USA Designation Designation Ludlum Designation Iron based alloys C-250 Vascoax C-250 W.-r. DI AFOR AS 6501, 6512, 6520 Iron based alloys C-350 Vascoax C-350 Iron based alloys C-200 Vascoax C-200 Iron based alloys C-300 Vascoax C-300 6514 Iron based alloys T-200 Vascoax T-200 Iron based alloys T-250 Vascoax T-250 6518, 6519, 6591 Iron based alloys Greek Ascoloy AL 418 5508 Iron based alloys Jethete -152 Z12 CD 12 5718, 5719 Iron based alloys aynes 556 X12CrCoi2120 5768 Iron based alloys 155 Z12 CKDW 20 5768 Iron based alloys S 590 X40CoCri2020 Z42 CKDW 5533 Iron based alloys A286 ALTE A 286 1.4980 R 5152 Z06 CT 25 AST 368 Iron based alloys Discaloy 16/25/6 Z3 CT 25 5725 Iron based alloys AL-6X Alloy AL-6X Alloy AST SB688 Iron based alloys Discaloy 24 Z3 CT 25 AST A638 Iron based alloys Armco 18 Iron based alloys Incoloy 801 G-X50Cri3030 5552 Iron based alloys Incoloy 800 ickelvac 800 AL 800 X10iCrAlTi3220 3082-76 25 C 3520 ASE SB 409 Iron based alloys Incoloy 802 Iron based alloys 156 Iron based alloys 20CB-3 AL 20 AST B463 Iron based alloys Sanicro 30 X2iCrAlTi3220 Iron based alloys Incoloy 803 Iron based alloys Allvac 330 Allvac 330 5592, 5716 Iron based alloys Alloy 36 AL 36 AST F1684 Iron based alloys Incoloy DS X12iCrSi3616 3072-76 Iron based alloys Alloy 42 AL 42 AST F30 Iron based alloys Armco 20-45-5 Iron based alloys 4750 AL 4750 AST B753 Iron based alloys Alloy 21-6-9 ALLOY 21-6-9 AST A666 Iron based alloys 13-8 o Vasco 13-8 o 5629 Country/Standard aterial Group Commercial ATI Allvac ATI Allegheny GERAY/ITALY U.K. FRACE USA Designation Designation Ludlum Designation W.-r. DI AFOR AS Cobalt based alloys 35 Allvac 35 Cobalt based alloys L 605 ickelvac L-605 CoCr20W15i KC 20 W 5759 Cobalt based alloys TJA-1537 ickelvac TJA- 1537 AST F1537 Cobalt based alloys S 816 ALTE S 816 CoCr20i20W 5534 Cobalt based alloys S 21 CoCr28o 3531 AST F-75 Cobalt based alloys S 25 CoCr20W15i KC 20 W AISI 670 Cobalt based alloys S 30 CoCr26i14o Cobalt based alloys S 31 CoCr25iW 3146 KC 25 W AST A567 Cobalt based alloys S 36 CoCr19W14iB Cobalt based alloys Jetalloy 209 Cobalt based alloys L 251 Cobalt based alloys 203 ATI etal aterial Designations Unalloyed Steels Stainless Steels K Cast Irons S igh Temp. Alloys 40 Stainless ard aterials

aterials Cross Reference Chart i Co Cr o W Si n C Al Ti S Others 18.5 7.8 4.8 0.05 0.05 0.02 0.1 0.4 0.005 0.005 18.5 12.0 4.8 0.05 0.05 0.02 0.1 1.4 0.005 0.005 18.5 8.5 3.25 0.05 0.05 0.01 0.2 0.005 0.005 18.5 8.8 4.8 0.05 0.05 0.02 0.1 0.73 0.005 0.005 18.5 3.0 0.05 0.05 0.01 0.7 0.005 0.005 18.5 3.0 0.03 0.05 0.02 0.1 1.4 0.005 0.005 2 12 2.5 0.19 2.5 12 1.7 0.15 V 0.3 20 20 21 3 2.5 0.1 b + Ta 20 20 21 3 2.5 0.5 1.5 0.15 b 1.0 20 20 21 4 4 0.43 25 14 1.3 0.5 1.3 0.05 0.2 2.1 25 16 6 0.7 1.35 0.12 0.3 b 0.4 25 20.5 6.5 0.02 0.2 26 13.5 2.7 0.8 0.9 0.04 0.1 1.7 3.7 17.2 0.47 12.5 0.06 32 20.5 0.5 0.8 0.05 1.1 32.5 21.0 0.5 0.75 0.05 0.37 0.37 0.007 Cu 0.37 32.5 21.5 0.4 0.8 0.4 33 24 17 3 2 0.33 33 20 2.2 Cu 3.3 34 22 0.55 0.55 0.03 0.3 0.5 Cu 0.1 35 25 0.08 0.15 0.15 35.5 18.5 1.13 1.0 0.04 0.01 0.01 Cu 0.5 36 37 18 2.3 1.0 0.06 41 46 20 2.3 1.0 5 0.08 b 0.4 49 6.5 21 6.0 o 0.3 8.0 12.8 2.3 0.05 0.10 0.03 1.05 0.005 0.004 i Fe Cr o W Si n C Al Ti S Others 35 20 9.8 0.013 10 0.5 20 15 1.7 0.1 0.2 0.25 28 6 0.5 0.5 0.06 0.2 20 4 20 4 4 0.4 1.2 0.38 3 1 27 5 0.6 0.6 0.25 10 3 20 15 2 1.5 0.1 16 1 24 6 0.6 0.6 0.4 10 1.5 25 8 0.75 0.6 0.4 10 2 18 15 1.5 0.4 10 1 20 15 2.0 0.02 10 1 19 14 0.4 24.5 1 19.5 12 1 0.8 2.15 24.5 0.07 aterial Designations Unalloyed Steels Stainless Steels K Cast Irons S igh Temp. Alloys Stainless ard aterials 41

aterials Cross Reference Chart Country/Standard aterial Group Commercial ATI Allvac ATI Allegheny GERAY/ITALY U.K. FRACE USA Designation Designation Ludlum Designation W.-r. DI AFOR AS Cobalt based alloys 204 Cobalt based alloys 205 Cobalt based alloys AR- 302 CoCrW10TaZrB Cobalt based alloys AR- 322 CoCr22W9TaZrb Cobalt based alloys AR- 509 CoCr24i10WtaZrB 3146-3 Cobalt based alloys AR- 905 Cobalt based alloys AR- 918 CoCr20i20Ta Cobalt based alloys Stellite 1 KC 33 W13 Cobalt based alloys Stellite 6 KC 26 W Cobalt based alloys Stellite 12 KC 28 W8 Cobalt based alloys V-36 CoCr25i200Wb Cobalt based alloys WI-52 CoCr21o11W Cobalt based alloys X 40 CoCr25iW 3146-2 AST A567 Cobalt based alloys X 45 Cobalt based alloys X 50 Country/Standard aterial Group Commercial ATI Allvac ATI Allegheny GERAY/ITALY U.K. FRACE USA Designation Designation Ludlum Designation W.-r. DI AFOR AS ickel based alloys Alloy 22 AL 22 ASE SB575 ickel based alloys Allvac Allcorr ickel based alloys Astroloy Allvac Astroloy ickel based alloys Duranickel 310 ickel based alloys GR 235 AISI:686 ickel based alloys GR 235-D icr16oal ickel based alloys astelloy B ickelvac -B S-io30 D27FeV 5396A ickel based alloys astelloy B-2 ickelvac -B-2 ickel based alloys astelloy C icr17o17few C17DWY 5388C ickel based alloys astelloy D ickel based alloys astelloy ickelvac - ickel based alloys astelloy R235 ickel based alloys astelloy W ickelvac -W ickel based alloys astelloy X ickelvac -X ALTE X 2.4665 icr22feo R6,204 C22FeD 5536 ickel based alloys aynes 75 ickel based alloys S 27 ico32cr26o KC20W ickel based alloys I 100 ico15cr10oalti K15CAT 5397 ickel based alloys I 713 ickel based alloys Incoloy 020 2.4660 ASE SB463 ickel based alloys Incoloy 804 ickel based alloys Incoloy 825 ickelvac 825 AL 825 2.4858 icr21o 3072-76 C21FeDU ASE SB424 ickel based alloys Incoloy 901 ife35cr14oti Z8CDT42 5660 ickel based alloys Incoloy 903 ickel based alloys Incoloy 925 ickel based alloys Inconel 600 ickelvac 600 AL 600 2.4816 icr15fe 3072-76 C15Fe 5540 ickel based alloys Inconel 601 ickelvac 601 AL 601 2.4851 5715 ickel based alloys Inconel 617 ickelvac 617 2.4663 ickel based alloys Inconel 622 2.4602 ickel based alloys Inconel 625 ickelvac 625 ALTE 625 2.4856 icr22o9b C22FeDB ASE SB443 ATI etal aterial Designations Unalloyed Steels Stainless Steels K Cast Irons S igh Temp. Alloys 42 Stainless ard aterials

aterials Cross Reference Chart i Fe Cr o W Si n C Al Ti S Others 24.5 18.5 12 1 1 0.07 24.5 18.5 12 2.75 0.07 21.5 10 0.85 Ta 9.0 21.5 9 0.1 0.1 0.75 1.0 Ta 4.5, Zr 2.25 10 1 23.5 7 0.1 0.1 0.2 0.6 Ta 3.5, Zr 0.5 20 20 0.5 0.05 Ta 7.5, Zr 0.1 20 0.4 20 0.1 0.1 0.05 Ta 7.5, Zr 0.1 33 13 2.5 26 5 1.0 b 6.0 29 9 1.8 20 3 25 4 2 0.4 1 0.26 b 2.0 1 2 21 11 0.25 0.45 b 2.0 10.5 1.5 25.5 7.5 0.75 0.75 0.5 10.5 2 25.5 7 0.7 0.25 B 0.01 20.5 4 22.5 12 0.75 Fe Co Cr o W Si n C Al Ti S Others 2.5 20.6 13.9 2.65 31.0 10.0 2.0 0.02 0.25 0.25 b 0.4 17.0 15.0 5.0 0.04 4.0 3.5 B 0.025 0.6 0.5 1.0 0.5 4.4 0.6 10.0 15.5 5.2 0.4 0.2 0.15 3.0 2.0 4.5 15.5 5.0 0.15 3.5 2.5 B0.05 5.0 2.0 1.5 28.0 0.05 0.5 0.02 V 0.4 1.0 0.5 0.5 16.0 0.05 0.5 0.01 0.02 0.015 6.0 2.0 15.0 17.0 5 0.04 2.0 1.0 9.0 1.0 0.1 Cu 3.0 4.0 7.0 16.5 0.02 10.0 2.5 15.5 5.5 0.15 2 2.5 4.0 5.0 24.5 0.02 18 1.5 22 9.0 0.6 0.1 5.0 20.0 0.12 0.25 0.4 Cu 0.5 2.0 31.5 26.0 6.0 0.4 15.0 10.0 3.0 0.18 5.5 4.7 V 1.0 2.5 13.0 4.6 0.4 0.2 0.18 6.0 0.8 b 2.6 37 20 2.5 b 0.6 Cu 3.5 25.4 29.5 0.5 0.75 0.06 0.25 0.6 Cu 0.4 30 21.5 3.0 0.5 0.65 0.03 0.2 0.9 Cu 2.25 35.3 13.45 6.20 0.22 0.48 0.05 2.5 42.0 15.0 0.7 1.4 b3.0 28 21 3 0.3 2.1 Cu 1.8 8.0 15.5 0.075 14.0 23.0 0.2 0.5 0.05 1.3 0.008 Cu 0.5 12.5 22 9.0 0.07 1.0 2.3 20.5 14.2 3.2 2.5 21.5 9.0 0.05 0.3 0.3 Cb 3.7 aterial Designations Unalloyed Steels Stainless Steels K Cast Irons S igh Temp. Alloys Stainless ard aterials 43

aterials Cross Reference Chart Country/Standard aterial Group Commercial ATI Allvac ATI Allegheny GERAY/ITALY U.K. FRACE USA Designation Designation Ludlum Designation W.-r. DI AFOR AS ickel based alloys Inconel 690 ickelvac 690 2.4642 ickel based alloys Inconel 700 ico28cr15oalti K27CADT ickel based alloys Inconel 702 5550 ickel based alloys Inconel 706 Allvac 706 57-2 ickel based alloys Inconel 713 G-iCr13Al16ob 3146.3 C13AD 5391 ickel based alloys Inconel 718 Allvac 718 ALTE 718 2.4668 icr19fe19bo R8 C19Feb 5383 ickel based alloys Inconel 718-O Allvac 718-O ickel based alloys Inconel 720 Allvac 720 ickel based alloys Inconel 721 ickel based alloys Inconel 722 ickelvac W-722 icr16feti C16Feti 5541 ickel based alloys Inconel 725 ickel based alloys Inconel 751 ickelvac X-751 2.4694 ickel based alloys Inconel X-750 ickelvac X-750 ALTE 750 2.4669 icr16fetti C15FeTb 5542 ickel based alloys Jessop G 81 icr20co18ti ickel based alloys Jethete -252 Allvac -252 G-iCr19Co 5551 ickel based alloys AR- 200 iw13co10cr9alti KW10CATaf ickel based alloys AR- 246 ico10w10cr9alti ickel based alloys AR- 421 icr16co10walti ickel based alloys AR- 432 ico20cr16walti ickel based alloys onel 400 ickelvac 400 AL 400 2.4360 icu30fe 3072-76 U30 4544 ickel based alloys onel K 500 ickelvac K-500 2.4375 icu30al 3072-76 4676 ickel based alloys onel R 405 4674 ickel based alloys imocast 713 G-iCr13A16ob C203 C13AD 5391A ickel based alloys imocast D 16 ife33cr17o ickel based alloys imocast E 10 C202 C2013 ickel based alloys imonic 105 2.4634 ico20cr15oalti R3 CKD20ATV ickel based alloys imonic 115 2.4636 ico15cr15oalti R401, 601 CVK15ATD ickel based alloys imonic 75 2.4630 icr20ti R5, 203-4 C20T ickel based alloys imonic 80A ickelvac 80 A 2.4631 icr20tial R401, 601 C20TA ickel based alloys imonic 86 ickel based alloys imonic 90 ickelvac -90 2.4632 icr20co18ti R2,202 CK20TA ickel based alloys imonic 901 ickelvac 901 2.4662 icr15oti Z8CDT42 5660, 5661 ickel based alloys imonic 95 ickel based alloys imonic C-22 ickelvac C-22 ickel based alloys imonic C-263 ickelvac C-263 ALTE 263 2.4650 icr20cooti R10 CK20D ickel based alloys imonic C-276 ickelvac C-276 AL 276 2.4819 ASE SB575 ickel based alloys imonic E 13 icr22fe18o R6,204 C22FeD 5536E ickel based alloys imonic E 16 ife33cr17o R207 W11AC ickel based alloys imonic K 25 KCD20ATU 5751A ickel based alloys imonic K 31 ickel based alloys imonic K 33 icr20co16oti 5057 C19KDU/V ickel based alloys R-235 ickel based alloys Refractaloy 26 Z6KCDT38 AISI:690 ickel based alloys René 100 ico15cr10oalti ickel based alloys René 125 ickel based alloys René 41 Rene 41 icr19co11oti C19KDT 5712, 5713 ickel based alloys René 63 ATI etal aterial Designations Unalloyed Steels Stainless Steels K Cast Irons S igh Temp. Alloys 44 Stainless ard aterials

aterials Cross Reference Chart Fe Co Cr o W Si n C Al Ti S Others 9.0 29.0 0.2 0.2 0.25 0.007 Cu 0.2 0.7 28.5 15 3.7 0.3 0.1 0.12 3.0 2.2 0.4 15.6 0.2 0.05 0.04 3.4 0.7 16.0 0.03 1.8 Cb 2.9 12 4.5 0.13 6 0.6 17.2 19.0 3.1 0.02 0.5 0.9 Cb 5.2 17.2 19.0 3.1 0.02 0.5 0.9 Cb 5.2 14.7 18 3 1.25 2.5 5 8.0 16 0.15 2.25 0.07 0.1 3.0 Cu0.2 7.0 15.5 0.04 0.7 2.4 7.5 21 8 0.3 1.5 b 3.5 7.0 15.5 0.2 0.5 0.05 1.2 2.3 0.005 Cb 1.1, Cu 0.2 7.0 15.5 0.04 0.7 2.5 Cb 0.95 0.5 16.9 20.6 0.2 0.5 0.08 1.5 2.5 2.5 10.0 19.0 9.75 0.15 1.0 2.5 B 0.007 10.0 9.0 12.5 0.15 5.0 2.0 b1.0 10.0 9.0 2.5 10.0 0.15 5.5 1.5 Ta1.5 10.0 15.5 1.7 3.5 0.15 4.25 1.75 b1.75 20.0 15.5 3 0.15 2.5 4.3 b2.0 1.2 0.25 0.15 0.01 1.0 0.25 0.7 0.1 2.7 0.6 0.01 1.25 0.25 1.0 0.15 Cu31.5 13.5 4.5 0.12 6.0 0.9 34.0 16.5 3.3 0.06 1.2 1.2 3.0 20.0 6.0 2.5 0.03 0.5 20 14.75 5 0.5 0.5 0.1 4.7 1.2 Cu 13.2 14.2 4 0.16 5 4 Zr 4 20 0.45 0.45 0.45 0.1 0.35 Cu+S 0.55 19.5 0.2 0.55 0.08 1.4 2.4 Cu+S 25 10 Ce 0.03 0.3 18.0 19.5 0.065 1.4 2.4 35.0 12.5 6.0 0.05 2.8 B 0.015 5.0 18.0 19.5 1.0 1.0 0.1 2.0 3.5 4.0 1.2 21.2 13.5 3.0 0.04 0.2 0.07 0.01 V 0.17 20.0 20.0 5.85 0.06 0.45 2.15 5.0 0.5 15.5 16.0 3.5 0.01 18.5 1.5 21.75 9 0.6 0.5 0.5 0.1 1.2 16.5 3.5 0.05 1.2 1.2 19.5 19 4 0.75 0.75 0.08 2.9 2.9 B 0.01 14 20 4.5 0.4 2.3 b5 0.5 14 18 7 0.25 0.25 0.05 2.1 2 10.0 1.15 15.0 5.5 0.3 0.1 0.12 20 2.5 16.0 20.0 18.0 3.2 1.0 0.8 0.03 0.2 2.8 15.0 10.0 3.0 0.18 5.5 4.7 V1.0 10.0 8.9 2.0 7.0 0.1 4.7 2.5 f1.05, Ta3.0 3.0 11.0 19.0 9.75 0.06 1.6 2.5 B 0.007 3.5 15.0 14.0 6.0 3.5 0.2 0.1 0.05 3.8 2.5 aterial Designations Unalloyed Steels Stainless Steels K Cast Irons S igh Temp. Alloys Stainless ard aterials 45

aterials Cross Reference Chart Country/Standard aterial Group Commercial ATI Allvac ATI Allegheny GERAY/ITALY U.K. FRACE USA Designation Designation Ludlum Designation W.-r. DI AFOR AS ickel based alloys René 77 ickel based alloys René 80 ickel based alloys René 95 C14K8 ickel based alloys TRW VIA ita9co8w6cral ickel based alloys Udimet 500 icr18cooalti CK19DAT AISI:684 ickel based alloys Udimet 520 Allvac 520 ickel based alloys Udimet 630 icr19bo ickel based alloys Udimet 700 ico15cr15oalti CKD20AT AISI:687 ickel based alloys Udimet 710 CK18TDA ickel based alloys Udimet 718 icr19fe19bo R8 C19Feb 5583 ickel based alloys Waspaloy Allvac Waspaloy 2.4654 icr20co14oti C20K14 5544 Country/Standard aterial Group Commercial ATI Allvac ATI Allegheny GERAY/ITALY U.K. FRACE USA Designation Designation Ludlum W.-r. Designation DI AFOR AS Alpha Titanium alloys Ti-5Al-2.5Sn Allvac 5-2.5 TiAl5Sn2 TA 14,17 T-A5E AST: B 265 Alpha Titanium alloys Ti-7Al-4o TiAl7o4 AST: B 381 Alpha Titanium alloys Ti-8Al-1o-1V Allvac 8-1-1 TiAl8o1V1 4915, 4933, 4972 Alpha Titanium alloys Ti-6Al-4Zr-2o-2Sn Allvac 6-2-4-2 TiAl6Zr4o2Sn2 4919, 4975, 4976 Alpha Beta Titanium alloys Ti-6Al-4V Allvac 6-4 TiAl6V4 TA 10-13 4906, 4920,4928, T-A6V TA 28 4965, 4967 Alpha Beta Titanium alloys Ti-6Al-6V-2Sn Allvac 6-6-2 TiAl6V6Sn2 4971 Alpha Beta Titanium alloys Ti-4Al-4o-2Sn-0.5Si Allvac 4-4-2 TiAl4o4Sn2Si0.5 5103 T-A4DE Alpha Beta Titanium alloys Ti-4Al-4o-4Sn-0.5Si TiAl4o4Sn4Si0.5 5203 Alpha Beta Titanium alloys Ti-7Al-4o TiAl7o4 AST: B 381 Alpha Beta Titanium alloys Ti-6Al-5Zr-0.5o- 0.25Si TiA6Zr5o0.5Si0.25 T-AGZ-50 Alpha Beta Titanium alloys Ti-6Al-5Zr-4o-Cu- TiAl6Zr5o4Cu 0.2Si Si0.2 201 Alpha Beta Titanium alloys 3-2.5 Allvac 3-2.5 4943, 4944 Alpha Beta Titanium alloys 6-4ELI Allvac 6-4ELI 4907, 4930, 4931 Alpha Beta Titanium alloys 6-2-4-6 Allvac 6-2-4-6 4981 Alpha Beta Titanium alloys Ti-17 Allvac Ti-17 4995 Beta Titanium alloys Ti-13V-11Cr-3Al Allvac 13-11-3 TiV13Cr11Al3 4917 Beta Titanium alloys Ti-8o-8V-2Fe-3Al Beta Titanium alloys Ti-3Al-8V-6Cr-4o- 4Zr Allvac 38-644 Beta Titanium alloys Ti-11.5o-6Zr-4.5Sn ure Titanium Ti 99.5 Allvac 70, Ti C-4 Ti 99.5 TA 6 AIR: 9182 T60 AST: B381F4 ure Titanium Ti 99.6 Allvac 55, Ti C-3 Ti 99.6 AIR: 9182 T50 AST: B381F3 ure Titanium Ti 99.7 Allvac 40, Ti C-2 Ti 99.7a TA 2-5 AIR: 9182 T40 AST: B381F2 ure Titanium Ti 99.8 Allvac 30, Ti C-1 Ti 99.8 TA 1 AIR: 9182 T35 AST: B381F1 Austempered ductile iron 269-321 E-GJS-800-8 125/80/10 (grade 1) Austempered ductile iron 269-321 E-JS1100 850/550/10 (grade 1) Austempered ductile iron 302-363 E-GJS-1000-5 150/100/7 (grade 2) Austempered ductile iron 302-363 E-JS1110 1050/700/7 (grade 2) Austempered ductile iron 341-444 E-GJS-1200-2 175/125/4 (grade 3) Austempered ductile iron 341-444 E-JS1120 1200/850/4 (grade 4) Austempered ductile iron 444-555 E-GJS-1400-1 230/185/--- (grade 5) Austempered ductile iron 444-555 E-JS-1130 1600/1300/-- (grade 5) ATI etal aterial Designations Unalloyed Steels Stainless Steels K Cast Irons S igh Temp. Alloys 46 Stainless ard aterials

aterials Cross Reference Chart Fe Co Cr o W Si n C Al Ti S Others 0.4 15.0 15.0 4.2 0.1 0.1 0.07 4.3 3.3 9.5 14.0 4.0 4.0 0.17 3.0 5.0 8.0 14.0 3.5 3.5 0.15 3.5 2.5 b3.5 7.5 6.0 2.0 5.8 0.13 5.4 1.0 b0.5, Ta9.0 19.0 4.0 0.1 0.1 0.07 3.0 3.0 12 19 6 1 2 3 18.0 18.0 3.0 0.03 0.5 1.0 b6.5 16.5 15.0 5.0 0.07 4.4 3.4 15.0 18.0 3.0 1.5 0.07 2.5 5.0 18.0 18.0 3.0 0.05 0.6 1.0 b+ta5.2 13.0 19.5 4.3 0.05 1.40 3.0 Zr.07 Al Sn o V Zr Si Others 5.0 2.5 7.0 4.0 8.0 1.0 1.0 6.0 2.0 2.0 4.0 6.0 4.0 5.5 2.0 5.5 4.0 2.0 4.0 0.55 4.0 4.0 4.0 0.5 7.0 4.0 Fe 0.3 6.0 0.5 5.0 0.25 6.0 4.0 5.0 0.2 Cu 1.0 3.0 2.5 Fe 0.13 6.0 Fe 0.2 6.0 2.0 6.0 4.0 Fe 0.10 5.0 2.0 4.0 2.0 Cr 4.0 3.0 13.0 Cr 11.0 3.0 8.0 8.0 3.0 4.0 8.0 4.0 Cr 6.0 4.5 11.5 6.0 Waspaloy is a registered trademark of ratt & Whitney Aircraft. Vasco, Vascoax, Jethete, ickelvac, Rene, Allvac and VascoJet are registered trademarks of ATI roperties, Inc. d.b.a. Allvac. aterial Designations Unalloyed Steels Stainless Steels K Cast Irons S igh Temp. Alloys Stainless ard aterials 47

48 otes

The ATI Advantage Technology Transfer eans Remarkable Knowledge ATI Stellram is a business unit of ATI etalworking roducts, an operating company of Allegheny Technologies Incorporated, a world-leading producer of titanium and other high temperature heat resistant alloys. The company s tooling engineers and metallurgists pool their talents to achieve smarter solutions for hard to machine materials. The technology transfer between the companies provides an extensive knowledge base of the metals as well as cutting tool performance. I think we re the best-kept secret in the metalworking business. When customers see what we can do, they agree with us, said David ogan, resident of ATI etalworking roducts. The Allegheny Technologies connection provides unique access to both information and technology, and we use this every day to help our customers improve their metal cutting efficiency. That s particularly important for hard to machine materials like stainless, titanium, nickel and cobalt based alloys, ogan said. The trends in industry today are leading to an increase in the use of new alloy materials in products to reduce overall weight, increase strength, reduce corrosion and withstand high temperatures. These new alloy materials are being incorporated into products in aerospace, power generation, oil & gas, medical and automotive industries. We ve developed unique approaches for working these metals many of them exclusive to ATI Stellram. We will continue to work with the other divisions of Allegheny Technologies to provide exceptional solutions for metalcutting applications. ogan said. Our goal is to make the seemingly impossible machining challenges possible through our new product solutions. Our success is based on increasing the profitability of your machining operations. Stainless steels, titanium and titanium alloys, nickel based alloys, silicon electrical steels, armor materials and tool steels. Titanium based alloys, nickel based and cobalt based alloys, specialty alloys. Zirconium, hafnium, niobium, titanium alloys. Gray and ductile iron casting. Carbon and alloy steel forgings. Specialised machining and finishing for titanium mill products. SOLUTIOS FOR DIFFICULT TO ACIE ATERIALS