WIRE&CABLE
Disclaimer: - The applications specified for reference only. - It is customer s responsibilities to inspect and test the product for suitability of the customer s own use and purpose. The customer is responsible for appropriate, safe, legal use, processing and handling of the product. - To the best of our knowledge, the information contained herein is accurate and reliable as of the date of publication. We however do not assume any liability whatsoever for the accuracy and completeness of the information contained herein. - We make no warranties which extend beyond the description herein. Nothing herein shall constitute any implied warranty of merchantability or fitness for a particular purpose. - No liability can be accepted in respect for the use of the product in conjunction with other materials. The information contained herein relates exclusively to the product when it is not used in conjunction with any third party s materials. Rev. Aug 2017 valid until next revision
INTRODUCTION SCG Chemicals is one of the largest integrated petrochemical companies in Asia and a key industry leader. We manufacture and supply a full range of petrochemical products ranging from upstream monomers to downstream polymer including PE, PP, PVC, PS and MMA To better serve customers requirements, SCG Chemicals assign prime importance to development of new technology and innovation for the creation of high value-added products and services (HVA). Widely recognized for product quality as well as for excellent management and world-class operation efficiency, SCG Chemicals has joint ventured with a number of the world s leading chemical companies, including the DOW Chemical Company, Mitsui Chemicals and Mitsubishi Rayon. Our Production Capacity (As of 2017) Total Capacity : 2,878 KTA (PE / PP / PVC) HDPE 920 LDPE 152 LLDPE 120 PP 720 Polyolefin Total : 1,912 (KTA) PVC Total : 966 (KTA) PVC Resin 850 PVC Compound 80 PVC Paste Resin 36 01
Polyethylene Resin EL-Lene is a trademark of polyethylene resin, manufactured by utilizing the world class technology from Mitsui Chemicals, Inc. of Japan. With excellent Bi-Modal process and compounding technology, we can offer the outstanding mechanical, electrical, thermal properties, and excellent surface appearance. EL-Lene Polyethylene Compound for wire & cable applications including jacketing, insulation of power and telecommunication cable, have been certified by many international regulatory standards such as ASTM, TIS, JIS, IEC, and AS/NZS
Polyethylene Compound Black HDPE Compound/ Black MDPE Compound Grade MFR (g/10min) ASTM D1238 @ 190 C, 2.16 kg. H2001WC 0.13 M545WC 0.6 Density (g/cm 3 ) ASTM D1505 0.963 0.948 Tensile Strength at Break (MPa) ASTM D638 @ Crosshead Speed 50 mm/min 34 28 Elongation at Break ASTM D638 @ Crosshead Speed 50 mm/min >800 >800 OIT @200 C (min) ASTM D3895 @ 200 C >70 >70 Key Characteristic - Excellent mechanical properties - High extrusion speed - Excellent ESCR - Good surface apprearance - Good mechanical properties - High extrusion speed Recommended Application Jacketing for power cable, fiber optic cable, and telecommunication cable Jacketing for power cable, fiber optic cable, and telecommunication cable 03
HDPE Compound Natural HDPE Grade MFR (g/10min) ASTM D1238 @ 190 C, 2.16 kg. H511W 0.9 H520W 0.8 Density (g/cm 3 ) ASTM D1505 0.949 0.951 Tensile Strength at Break (MPa) ASTM D638 @ Crosshead Speed 50 mm/min 34 34 Elongation at Break ASTM D638 @ Crosshead Speed 50 mm/min >600 >600 OIT @200 C (min) ASTM D3895 @ 200 C >100 >50 Key Characteristic - Long-term insulation stability performance - High extrusion speed - Good mechanical properties - Good surface apprearance - Good mechanical properties - High extrusion speed Recommended Application Insulation of communication cable such as LAN cable, telephone cable, and signal cable Filler rod, spacer, color strip in wire & cable application 04
Crosslinkable Polyethylene Compound (XLPE) With Siloplast Process Technology from Chemtech Co., Ltd. of Vietnam, we provide several products of XLPE for low to medium voltage power cable up to 25 KV. Our products can be customized to meet different customer s requirements such as fast curing, conductor color change prevention, and excellent surface appearance with low shrinkage and good processability.
Crosslinkable Polyethylene Compound (XLPE) Grade LS 203 NTB LS 243 NTA LS 210 NTA LS 211 NTA MFR (g/10min) ASTM D1238 @ 190 C, 2.16 kg. 2.8 2.0 2.0 2.0 Hot Set Test (200 C, 0.2 MPa, 15 min) IEC 60811-2-1 35/-10 25/-8 60/-6 50/-6.5 Tensile Strength (MPa) IEC 60811-1-1 18.0 21.0 20.0 19.5 Elongation IEC 60811-1-1 500 480 560 510 Volume Resistivity (x10 17 Ohm.cm) IEC 60093 3.6 2.7 2.2 2.7 Key Characteristic - Crosslinking by immerse in hot water (90 C) 8-12 hrs. - Low processing temperature 140 to 180 C - Good crosslinking property - Crosslinking by immerse in hot water (90 C) 10-30 hrs. - Good surface/low shrinkage - Crosslinking by immerse in hot water (90 C) 4-5 hrs. - Good surface/low shrinkage - Crosslinking by immerse in hot water (90 C) 4-5 hrs. - Good surface/low shrinkage - Meet NFC33-209 STD Recommended Application - Medium voltage insulation up to 24KV - Medium voltage insulation up to 24KV, fast curing time - Low voltage insulation - improved surface, suiltable for small wire up and wall thickness up to 1.4 mm. - Low voltage insulation - meet NFC 33-209 standard (higher spec. than IEC) 06
Crosslinkable Polyethylene Compounds (XLPE) Grade LS 240 NTA LS 220 NTA LS 206 NTA LS 121 NTA MFR (g/10min) ASTM D1238 @ 190 C, 2.16 kg. 2.0 2.0 2.0 2.8 Hot Set Test (200 C, 0.2 MPa, 15 min) IEC 60811-2-1 25/-10 75/-7 85/-5 25/-5 Tensile Strength (MPa) IEC 60811-1-1 22.9 18.0 20.0 21 Elongation IEC 60811-1-1 465 580 580 470 Volume Resistivity (x10 17 Ohm.cm) IEC 60093 1.9 1.9 2.8 2.0 Key Characteristic - Very short crosslinking time by immerse in hot water (90 C) 0.5-3 hrs. - Good surface/low shrinkage - Crosslinking by immerse in hot water (90 C) 4-5 hrs. - Good surface/low shrinkage - Contains metal deactivator - Crosslinking by immerse in hot water (90 C) 4-5 hrs. - Good surface/low shrinkage - Good crosslinking property and easy to process - Crosslinking by immerse in hot water (90 C) 2-3 hrs. or ambient cure 5 days for thickness 1 mm. - Good surface/ Low shrinkage Recommended Application - Low voltage insulation - fast curing and suitable for wall thickness up to 2.8 mm. - Low voltage insulation - contains metal deactivator - Low voltage insulation - provides good crosslinking and easy-to-process properties - Low voltage insulation - one step grade 07
PVC Compound More than 50 years experience of Thai Plastics and Chemicals (TPC), we are the Asian leading PVC compounder, supplying the wide range of wire & cable applications including insulation and jacketing covering wide range of applications such as, building wire, communication wire, electrical appliance, electrical plug, cable adhesive tape, and special cables such as high flame retardant and low smoke low halogen cable. Our PVC compound products have been guaranteed its quality by local and international standards such as ASTM, TIS, JIS, IEC, and As/NZS and can be customized to meet customer s special requirements.
PVC Compound Low Voltage Power Cable Grade Hardness Shore A ASTM D2240 C08XX C27XX-C29XX C37XX-C39XX C48XX-C49XX C76XX-C79XX C87XX-C89XX 76-82 70-99 70-99 78-99 58-99 70-99 Aging Condition Temperature ( C)/Days 100 C / 5 Days 80 C / 7 Days 100 C / 5 Days 120 C / 7 Days 80 C / 7 Days 80 C / 7 Days Tensile Strength (MPa) min 13.5 min 13.5 min 9.5 min 14.5 min 5.5 min 5.5 Elongation min 250 min 250 min 150 min 250 min 150 min 200 Volume Resistivity (x10 13 Ohm.cm) min 0.1 min 0.1 min 0.1 min 0.1 min 0.1 min 0.1 Recommended Application Jacketing Jacketing and Insulation Jacketing and Insulation Jacketing and Insulation Jacketing and Insulation Jacketing and Insulation 09
PVC Compound Flame Retardant Grade Hardness Shore D ASTM D2240 C69XX 40-50 Aging Condition Temperature ( C)/Days 120 C / 7 Days Tensile Strength (MPa) min 12.5 Elongation min 150 Volume Resistivity (x10 13 Ohm.cm) min 50 Recommended Application Building wire 10
PVC Compound Electrical Appliance Cable Grade Hardness Shore A ASTM D2240 C56XX 55-65 C58XX 75-85 Aging Condition Temperature ( C)/Days 136 C / 7 Days 120 C / 5 Days Tensile Strength (MPa) min 11.5 min 19.5 Elongation min 250 min 250 Volume Resistivity (x10 13 Ohm.cm) min 0.5 min 0.5 Recommended Application Insulation (Non Migration) Insulation (Non Migration) 11
PVC Compound Plug and Electrical Tape Grade C26XX C28XX C29XX C29XX Hardness Shore A ASTM D2240 72-82 82-92 86-95 82-88 Aging Condition Temperature ( C)/Days 100 C / 5 Days 100 C / 5 Days 100 C / 5 Days 80 C / 7 Days Tensile Strength (MPa) min 14.5 min 21.0 min 14.5 min 12.5 Elongation min 200 min 200 min 200 min 125 Volume Resistivity (x10 13 Ohm.cm) min 0.1 min 1.0 min 1.0 min 1.0 Recommended Application Electrical Tape Electrical Tape Electrical Tape Plug 12
Overseas Offices & Contact Information Head Office: SCG Performance Chemicals Co., Ltd. 1 Siam Cement Road, Bangsue, Bangkok, Thailand 10800 Tel: +662 586 1111 Ext. 7216 Fax: +662 586 3676 Email: wire&cable@scg.com Hanoi Shanghai Guangzhou Myanmar Thailand Ho Chi Minh Surabaya Australia SOUTHEAST ASIA CHINA INDONESIA PT. TPC Indo Plastic and Chemicals (Surabaya Office) Lt.5, unit S 508-509, Kompleks Graha Festival Kav.3 Mayjend Yono Soewoyo, Graha Family, Surabaya 60226 Tel. +62 319 900 120 56 Fax. +62 319 900 1204 MYANMAR SCG Plastics Co., Ltd. 2nd floor N. 136/137, Pyay Road, Saw Bea Gyi Gone, Yangon, Myanmar Tel. +95 951 946 41, +95 973 183 332 SCG Plastics (China) Co., Ltd. (Shanghai Office) RM 1012 Huarong Building No.1271-1289, South of Pudong Road, Pudong New Area, Shanghai, China, 200122 Tel. +86 182 170 743 69 Fax. +86 216 888 6092 SCG Plastics (China) Co., Ltd. (Guangzhou Office) Unit 3207, Block B, China Shine Plaza, No.9 Lin He Xi Road, Tianhe, Guangzhou, China 510610 Tel. +86 139 030 579 29 Fax. +86 203 810 1370 AUSTRALIA VIETNAM SCG Plastics Co., Ltd. (Ho Chi Minh Office) 10th Floor, An Phu Plaza 117-119 Ly Chinh Thang P7, Q3 Ho Chi Minh City, Vietnam Tel. +84 988 804 672 Fax. +84 829 612 76 SCG Plastics Co., Ltd. (Hanoi Office) SCT Co., Ltd. (Hanoi) Representative Office 196 Truong Chinh, Dong Da dist., Hanoi city Tel. +84 439 744 354 Fax. +84 439 744 350 TPC Vina Plastic and Chemicals Corporation Co., Ltd. (Ho Chi Minh Office) U.901-9th Fl., Harbor View Tower, 35 Nguyen Hue Street District 1, Hochiminh City, Vietnam Tel. +84 838 234 730 Fax. +84 838 234 725 Viet-Thai Plastchem Co., Ltd. An Phu Ward, Thuan An Town, Binh Duong, Vietnam Tel. +84 650 374 0060 Fax. +84 650 374 0065 SCG Trading Australia Pty Ltd. Level 4, No.1 Chandos Street, St. Leonards NSW 2065, Australia Tel. +61 294 381 225, +61 411 022 231 Fax. +61 294 360 195 Chemtech Co., Ltd. D_8A4_CN, My Phuoc 3I.P, Ben Cat, Binh Duong, Vietnam Tel. +84 650 378 4992 Ext. 440 Fax. +84 650 378 4993
SCG Performance Chemicals Co., Ltd. 1 Siam Cement Road, Bangsue, Bangkok, Thailand 10800 Tel: +662 586 1111 Ext. 7216 Fax: +662 586 3676 www.scgchemicals.com