ROD ENDS SRE Australia supply a comprehensive range of quality Rod Ends www.sreaustralia.com.au
SRE Australia Products & Services SRE Australia Pty Ltd was established February 2010, manufacturing Spherical Rod Ends and Ball Joints. A broad product offering, value-based customer service and cost effective manufacturing techniques are key elements that help distinguish SRE as a leader. In addition to the standard products detailed in this catalogue, SRE routinely designs and manufactures speciality bearings specific to a variety of custom applications. Sales personnel at SRE are among the most knowledgeable and experienced bearing professionals in the industry today. Working with customers to solve problems and meet specific product and delivery needs is their first priority. SRE wide product line includes spherical rod ends, ball joints and other linkage assemblies. Each of these products is developed through sound engineering and built to rigid control standards. SRE Australia Pty Ltd PO Box 7292 Brendale Qld 4500 Phone: 07 3881 0400 www.sreaustralia.com.au 2
Product Reference Guide AM SERIES 5 High strength Aluminium male, polishing colour anodized for surface treatment. Injection material is mixing plastic with PTFE for Lubricating Free. XM SERIES 6 Alloy steel heated, protective coated for corrosion resistance. Ball, bearing steel. Hardened, Polished, hard chrome plated. IMPERIAL C SERIES 7 Alloy steel heat treated, protective coated for corrosion resistance. Ball, bearing steel, hardened, polished, hard chrome plated. METRIC K SERIES 8 Carbon, heat treated, and surfacing zinc plating. IMPERIAL G SERIES 9 Alloy steel heat treated, protective coated for corrosion resistance. (stainless steel). Ball, bearing steel, hardened, polished, hard chrome plated. SPF SERIES 10 SAE design molded race female rod ends. Self-Lubricating, reinforced nylon raceway allows extended, high cycling use in heavy duty applications. BALL STUD JOINT & LINKAGE 11 Material of body & stud, carbon or alloy steel is available, heat treated, protective coated for corrosion resistance. 3
Product Reference Guide COM SERIES 12 For the out ring carbon, alloy and stainless steel is available, heat treated; for ball, bearing steel, hardened, hard chrome plated. FORKS (CLEVIS) WITH LOCK PIN 13 Fork, Carbon Steel, Surface Zinc Plated. Spring, C60 to CK75. Pin, 1045 Carbon Steel. FORKS / CLEVIS 14 Material to be carbon steel, or alloy steel or Stainless steel. CLEVIS ASSEMBLIES 15 Includes Pin, Washer and Cotter Pin. Length is from centre to pin to end of barrel. ACCESSORIES (WELDABLE BUNG) 16 Material to be carbon, or chrome moly steel. Length and fits tube can be based on different customer s requirements. ACCESSORIES (MISALIGNMENT INSERT SPACER) 17 Material to be carbon steel, zinc plating clear or yellow or stainless steel. Length, OD, ID can be customized made based on any individual requirements. ACCESSORIES (CORE SPACER) 18 Material to be carbon steel, zinc plating clear or yellow, or stainless steel. Length, OD, ID can be customized made based on any individual requirements. 4
RACE CAR SERIES - AM HIGH PERFORMANCE MALE ROD ENDS - ALUMINIUM Inch Series / Injection Type / Maintenance Free Male Type d +.0015 -.0005 B +.000 -.005 G Thread C 1 Ref d 2 +.01 -.01 h +.015 -.015 I 1 +.062 -.031 Radial Static Load (klbs) -------------------------- AM Ball Dia. Ref. α AM3.1900.312 10-32.250.625 1.250.750 1.35.437 13 AM4.2500.375 1/4-28.281.750 1.562 1.000 2.50.500 15 AM5.3125.437 5/16-24.344.875 1.875 1.250 3.20.625 14 AM5-6.3125.437 3/8-24.344 1.000 1.938 1.250 5.80.625 12 AM6.3750.500 3/8-24.406 1.000 1.938 1.250 4.50.719 12 AM6-7.3750.500 7/16-20.406 1.125 2.125 1.375 7.80.719 10 AM6-8.3750.500 1/2-20.406 1.125 2.125 1.375 7.80.719 10 AM7.4375.562 7/16-20.437 1.125 2.125 1.375 4.80.812 14 AM7-8.4375.562 1/2-20.437 1.312 2.438 1.500 11.10.812 12 AM8.5000.625 1/2-20.500 1.312 2.438 1.500 7.70.937 12 AM8-10.5000.625 5/8-18.500 1.500 2.625 1.625 15.00.937 10 AM10.6250.750 5/8-18.562 1.500 2.625 1.625 8.60 1.125 15 AM10H.6250.750 5/8-18.562 1.750 2.625 1.625 19.30 1.125 13 AM10-12.6250.750 3/4-16.562 1.750 2.875 1.750 19.30 1.125 13 AM12.7500.875 3/4-16.687 1.750 2.875 1.750 13.40 1.312 14 AM12-757.7570.875 3/4-16.687 1.750 2.875 1.750 13.40 1.312 14 1. High strength Aluminium for male type body material is available, polishing and colour anodized for surface treatment. 2. Prefix R to number for right hand thread part no. as AMR... or AFR... and prefix L to number for left hand thread part no. as AML... or AFL.... 3. Injection material is mixing plastic with PTFE for lubricating free. 5
RACE CAR SERIES - XM HIGH PERFORMANCE MALE ROD ENDS - CHROME MOLY Inch Series / Injection Type / Maintenance Free Male Type d +.0015 -.0005 B +.000 -.005 G Thread C 1 Ref d 2 +.01 -.01 h +.015 -.015 I 1 +.062 -.031 Radial Static Load (klbs) -------------------------- XM XM3.1900.312 10-32.250.625 1.250.750 2.85.437 13 XM3-4.1900.312 1/4-28.250.750 1.562 1.000 5.25.437 10 XM4.2500.375 1/4-28.281.750 1.562 1.000 5.25.500 15 XM4-5.2500.375 5/16-24.281.875 1.875 1.250 8.45.500 13 XM5.3125.437 5/16-24.344.875 1.875 1.250 7.65.625 14 XM5-6.3125.437 3/8-24.344 1.000 1.938 1.250 12.97.625 12 XM6.3750.500 3/8-24.406 1.000 1.938 1.250 9.54.719 12 XM6-7.3750.500 7/16-20.406 1.125 2.125 1.375 17.50.719 10 XM7.4375.562 7/16-20.437 1.125 2.125 1.375 10.3.812 14 XM7-8.4375.562 1/2-20.437 1.312 2.438 1.500 23.45.812 12 XM8.5000.625 1/2-20.500 1.312 2.438 1.500 16.2.937 12 XM8-10.5000.625 5/8-18.500 1.500 2.625 1.625 31.39.937 10 XM10.6250.750 5/8-18.562 1.500 2.625 1.625 17.9 1.125 15 XM10-12.6250.750 3/4-16.562 1.750 2.875 1.750 40.57 1.125 13 XM12.7500.875 3/4-16.687 1.750 2.875 1.750 28.1 1.312 14 1. Material of body, alloy steel heat treated, protective coated for corrosion resistance. Ball, bearing steel, hardened, polished, hard chrome plated. 2. Prefix R to number for right hand thread part no. as XMR... or XFL..., and prefix L to number for left hand thread part no. as XML... or XFL.... Ball Dia. Ref. α 3. Injection material is mixing plastic with PTFE for lubricating free. 6
IMPERIAL ROD ENDS MALE AND FEMALE - STEEL Inch General Series/Integral design Male Type Female Type d +.0015 -.0005 B +.000 -.005 G Thread C 1 Ref d 2 +.01 -.01 h +.015 -.015 I 1 h 1 I 2 +.062 +.015 +.062 -.031 -.015 -.031 d 3 +.01 -.01 W +.01 -.01 Ball Dia. Ref. Radial Static Load (lbs) α CM3 CF3.1900.312 10-32.234.625 1.250.750 1.062.500.406.312.437 2080 10 CM4 CF4.2500.375 1/4-28.250.750 1.562 1.000 1.312.687.469.375.500 3820 14 CM5 CF5.3125.437 5/16-24.312.875 1.875 1.250 1.375.687.500.437.625 5110 11 CM6 CF6.3750.500 3/8-24.359 1.000 1.938 1.250 1.625.812.687.562.719 7600 11 CM7 CF7.4375.562 7/16-20.406 1.125 2.125 1.375 1.812.937.750.625.812 9150 11 CM8 CF8.5000.625 1/2-20.453 1.312 2.438 1.500 2.125 1.062.875.750.937 12250 10 CM10 CF10.6250.750 5/8-18.484 1.500 2.625 1.625 2.500 1.375 1.000.875 1.125 13550 13 CM12 CF12.7500.875 3/4-16.593 1.750 2.875 1.750 2.875 1.562 1.125 1.000 1.312 18820 12 1. Material of body, alloy steel heat treated, protective coated for corrosion resistance. Ball, bearing steel, hardened, polished, hard chrome plated. 2. Prefix R to number for right hand thread part no. as CMR... or CFR..., and prefix L to number for left hand thread part no. as CML... or CFL.... 7
METRIC ROD ENDS MALE AND FEMALE Metric K Series / Bronze Race Metric / Maintenance Male Type Female Type d B G C 1 max d 2 max h I 1 min h 1 I 3 min I 5 max d 3 max d 4 max W Radial Static Load (kn) α SAK5C/T SIK5C/T 5 8 M5 7.5 19 33 19 27 8 4 9 12 10 10 13 SAK6C/T SIK6C/T 6 9 M6 7.5 21 36 21 30 9 5 10 14 11 11 13 SAK8C/T SIK8C/T 8 12 M8 9.5 25 42 25 36 12 5 12.5 17 13 19 14 SAK10C/T SIK10C/T 10 14 M10 11.5 29 48 28 43 15 6.5 15 20 16 31 13 SAK12C/T SIK12C/T 12 16 M12 12.5 33 54 32 50 18 6.5 17.5 23 18 37 13 SAK14C/T SIK14C/T 14 19 M14 14.5 37 60 36 57 21 8 20 27 21 49 16 SAK16C/T SIK16C/T 16 21 M16 15.5 43 66 37 64 24 8 22 29 24 63 15 SAK18C/T SIK18C/T 18 22 M18x1.5 17.5 47 72 41 71 27 10 25 32 27 73 15 SAK20C/T SIK20C/T 20 23 M20x1.5 18.5 51 78 45 77 30 10 27.5 37 30 83 14 SAK22C/T SIK22C/T 22 25 M22x1.5 21 55 84 48 84 33 12 30 40 34 102 15 SAK25C/T SIK25C/T 25 28 M24x2 23 61 94 55 94 36 12 33.5 44 36 112 15 SAK28C/T SIK28C/T 28 31 M27x2 25 66 103 61 103 41 14 37 46 41 142 15 SAK30C/T SIK30C/T 30 35 M30x2 27 71 110 66 110 45 15 40 52 46 162 17 SAK35C/T SIK35C/T 35 43 M36x2 32 81 140 85 125 56 20 49 60 55 182 16 SAK40C/T SIK40C/T 40 49 M42x2 37 91 150 90 142 60 25 57 69 65 210 16 SAK50C/T SIK50C/T 50 60 M48x2 47 117 185 105 160 66 25 65 78 70 232 14 1. Material of body: carbon, heat treated, and surface zinc plating. 2. Left hand thread: add L to prefix to number, example: SAKL16T or SIKL16T. 8
IMPERIAL ROD ENDS MALE AND FEMALE - STAINLESS STEEL Inch General Series / Integral Design Male Type Female Type d +.0015 -.0005 B +.000 -.005 G Thread C 1 Ref d 2 +.01 -.01 h +.015 -.015 I 1 h 1 I 2 +.062 +.015 +.062 -.031 -.015 -.031 d 3 +.01 -.01 W Ball Dia. Ref. Radial Static Load (lbs) α GMR3 GFR3 1900.312 10-32.234.625 1.250.750 1.062.500.406.312.437 2080 10 GMR4 GFR4 2500.375 1/4-28.250.750 1.562 1.000 1.312.687.469.375.500 3820 14 GMR5 GFR5 3125.437 5/16-24.312.875 1.875 1.250 1.375.687.500.437.625 5110 11 GMR6 GFR6 3750.500 3/8-24.359 1.000 1.938 1.250 1.625.812.687.562.719 7600 11 GMR7 GFR7 4375.562 7/16-20.406 1.125 2.125 1.375 1.812.937.750.625.812 9150 11 GMR8 GFR8 5000.625 1/2-20.453 1.312 2.438 1.500 2.125 1.062.875.750.937 12250 10 GMR10 GFR10 6250.750 5/8-18.484 1.500 2.625 1.625 2.500 1.375 1.000.875 1.125 13550 13 GMR12 GFR12 7500.875 3/4-16.593 1.750 2.875 1.750 2.875 1.562 1.125 1.000 1.312 18820 12 1. Material of body, alloy steel heat treated, protective coated for corrosion resistance. (Option of carbon or stainless steel is available). Ball, bearing steel, hardened, polished, hard chrome plated. 2. Prefix R to number for right hand thread part no. as CMR... or CFR..., and prefix to number for left hand thread part no. CML... or CFL.... 3. Suffix T to part no. with PTFE liner inside and C with DU liner inside. 4. Part no. to be GMR/L... for male GFR/L... for female when body material 304 stainless steel. 9
SPF SERIES Molded Race Part No. THREAD SIZE A AA B C D E F G H J K L M N O P R SPF-3(S) 10-32.189/.191.437.437.156.625.312 1.062.562 1.375.187.438.250.312.406.312.406 SPF-4(S) 1/4-28.250/.252.469.562.156.750.375 1.312.750 1.687.248.516.281.375.469.375.250 SPF-5(S) 5/16-24.3125/.3145.531.687.687.875.437 1.375.750 1.812.310.625.344.437.500.437.281 SPF-6(S) 3/8-24.375/.377.625.875.875 1.000.500 1.625.937 2.125.372.719.406.500.687.562.312 SPF-7(S) 7/16-20.4375/.4395.844 1.062 1.062 1.125.625 1.812 1.031 2.375.435.812.437.562.750.625.625 SPF-8(S) 1/2-20.500/.502.875 1.125 1.125 1.312.625 2.125 1.187 2.781.497.938.500.625.875.750.375 SPF-10(S) 5/8-18.625/.627 1.000 1.125 1.125 1.500.750 2.500 1.500 3.250.622 1.125.562.750 1.000.875.500 SPF-12(S) 3/4-16.750/.752 1.187 1.812 1.812 1.750 1.000 2.875 1.562 3.750.747 1.312.687.875 1.125 1.000 1.000 1. Bearing Raceway - Locked in by annular groove-trunnion design. Made of self-lubricating, reinforced nylon. 2. Spherical Ball - Precision made from low carbon steel. Surface hardened for wear resistance. Plated for corrosion resistance. 3. Threaded Stud - SPF-S threaded stud is made from carbon steel. Plated and dichromate treated for corrosion resistance. 4. Housing - Low carbon steel, plated and dichromate treated for corrosion resistance. 5. Left Hand Thread - Available with left hand thread in all sizes. Marked for easy user identification (add suffix L to model numbers, eg SPFL-4). 6. Metric Sizes - This assembly is also available in metric sizes. 10
BALL STUD JOINT & LINKAGE Metric Series / Integral Design Part No. d d 1 d 2 min I 1 min Dimensions in Millimeters I 2 S 1 S 2 L L 1 L 2 L 3 D 1 D 2 max min max max max D 3 max D 4 max I max I 3 max Radial Static Load (kn) α SQ5-RS 5 M5 9 8 10 7 9 35 14 4 27 9 11 16 19 29 21 9.2 15 SQ6-RS 6 M6 10 11 11 8 11 40 14 5 30 10 13 19 20 35.5 26 12.1 15 SQ8-RS 8 M8 12 12 14 10 14 48 17 5 36 12.5 16 23 24 42.5 31 19.1 15 SQ10-RS 10 M10x1.25 14 15 17 11 17 57 21 6.5 43 15 19 27 30 50.5 37 27.5 15 SQ12-RS 12 M12x1.25 17 17 19 15 19 66 25 6.5 50 17.5 22 31 32 57.5 42 37.5 15 SQ14-RS 14 M14x1.5 19 22 21.5 17 22 75 26 8 57 20 25 35 38 73.5 56 48.9 11 SQ16-RS 16 M16x1.5 22 23 23.5 19 22 84 32 8 64 22 27 39 44 79.5 60 48.9 11 SQ18-RS 18 M18x1.5 23 25 26.5 20 27 93 34 10 71 25 31 44 45 90 68 61.9 11 SQ20-RS 20 M20x1.5 27 25 25 24 30 99 35 10 77 27.5 34 44 50 90 68 61.9 7.5 SQ22-RS 22 M22x1.5 27 26 26 24 32 109 41 12 84 30 37 50 52 95 70 75.4 7.5 1. Material of body & stud, carbon or alloy steel is available, heat-treated, protective coated for corrosion resistance. 2. The body with male thread is available, part no. is SAQ...-RS. 11
IMPERIAL SPHERICAL PLAIN Inch Series / Swaged Pressed (Maintenance Free Available) D dk d1 D dk d1 D dk d1 COM COM...C COM...T d +.0015 -.0005 D +.0000 -.0005 B +.000 -.005 C +.005 -.005 d k r min chamfer Radial Static Load (klbs) α COM3 COM3C COM3T.1900.5625.281.218.406.020 7.45 11 COM4 COM4C COM4T.2500.6562.343.250.500.022 11.30 13 COM5 COM5C COM5T.3125.7500.375.281.562.032 13.60 12 COM6 COM6C COM6T.3750.8125.406.312.656.032 18.18 10 COM7 COM7C COM7T.4375.9062.437.343.687.032 22.85 8 COM8 COM8C COM8T.5000 1.0000.500.390.813.032 30.70 9.5 COM9 COM9C COM9T.5625 1.0937.562.437.906.032 38.10 9.5 COM10 COM10C COM10T.6250 1.1875.625.500 1.000.032 49.82 8.5 COM12 COM12C COM12T.7500 1.4375.750.593 1.187.044 72.35 9 COM14 COM14C COM14T.8750 1.5625.875.703 1.312.044 97.80 9.5 COM16 COM16C COM16T 1.0000 1.7500 1.000.797 1.500.044 129.50 10 1. For the out ring carbon, alloy and stainless steel is available, heat treated; for ball, bearing steel, hardened, hard chrome plated. 2. COM...C DU liner inside and for COM...T PTFE liner inside. 12
FORKS (CLEVIS) WITH LOCK PIN Forks (Clevis) with Lock Pin METRIC SERIES Metric Series- Forks With Lock Pin (DIN71752) Metric Series - Forks With Lock Pin (DIN71752) Dimension Part Chart: No. Dimensions in Millimeters d 2 Thread g a I 1 I 2 I 3 b d 1 d 3 G4x8 M4 (x0.7) 8 8 21 16 6 4 4 8 G8x16 G12x24 M8x1 M12x1.25 24 16 24 16 62 42 48 32 18 12 128 128 20 14 G10x20 G16x32 M10x1.25 M16x1.5 320 320 83 52 640 24 15 16 10 16 10 26 18 1. Fork, Notes: carbon steel, surface zinc plated. 2. Spring, C60 to CK75. 3. Pin, 1045 Spring, carbon C60 steel. to CK75. Dimensions in Millimeters G6x12 M6 (x1) d2-thread 12 g 12 a 31 l1 24 l2 9 l3 6 b 6 d1 10 d3 G8x16 G4x8 M8x1 M4 (x0.7) 16 8 16 8 42 21 32 16 12 6 8 4 8 4 14 8 G10x20 G6x12 M10x1.25 M6 (x1) 20 12 20 12 52 31 40 24 15 9 10 6 10 6 18 10 G12x24 G20x40 M12x1.25 M20x1.5 40 24 40 24 105 62 80 48 30 18 20 12 20 12 34 20 G16x32 G25x50 M16 M24x2 x 1.5 50 32 50 32 132 83 100 64 36 24 25 16 25 16 42 26 G20x40 M20 x 1.5 40 40 105 80 30 20 20 34 G30x54 M27x2 54 55 142 110 40 30 30 48 G25x50 M24 x 2 50 50 132 100 36 25 25 42 G30x60 M30x2 60 60 160 120 42 30 30 52 G30x54 M27 x 2 54 55 142 110 40 30 30 48 G36x72 G30x60 M36x2 M30 x 2 72 60 70 60 188 160 144 120 54 42 36 30 36 30 60 52 G36x72 M36 x 2 72 70 188 144 54 36 36 60 Fork, carbon steel, surface zinc plated. Pin, 1045 carbon steel. 36 13
FORKS / CLEVIS MALE TYPE Inch Series Part No. G Thread d I 1 I 2 L T W D CR5-5 5/16-24 0.3125 1.250 0.625 2.250 0.75 0.437 1.125 CR5-6 3/8-24 0.3125 1.250 0.625 2.250 0.75 0.437 1.125 CR5-8 1/2-20 0.3125 1.500 0.625 2.500 0.75 0.437 1.125 CR6-8 1/2-20 0.375 1.500 0.750 2.500 0.87 0.500 1.250 CR6-10 5/8-18 0.375 2.000 0.750 3.375 0.87 0.500 1.250 CR6-12 3/4-16 0.375 2.000 0.750 3.375 0.87 0.500 1.250 CR8-10 5/8-18 0.500 2.000 0.930 3.375 1.00 0.625 1.375 CR8-12 3/4-16 0.500 2.000 0.930 3.375 1.00 0.625 1.375 CR8-12-1 3/4-16 0.500 2.750 0.930 3.375 1.00 0.625 1.500 CR10-12 3/4-16 0.625 2.000 1.150 3.375 1.20 0.750 1.500 1. Material to be carbon steel, or alloy steel or stainless steel 2. For left hand thread, part no. to be CL series 3. Dimensions d W can be customized made 14
CLEVIS ASSEMBLIES Inch Series Thread Pin Dia. Length Inside Opening Inside Depth 175-601-202 10-32 UNF 3/16 1.56.19 1.00 175-601-204 10-32 UNF 1/4 2.00.29 1.30 175-601-206 1/4-28 UNF 1/4 2.00.29 1.30 175-601-210 1/4-28 UNF 5/16 2.25.34 1.44 175-601-208 5/16-24 UNF 1/4 2.00.29 1.30 175-601-212 5/16-24 UNF 5/16 2.25.34 1.44 175-601-216 5/16-24 UNF 3/8 2.50.44 1.63 175-601-214 3/8-24 UNF 5/16 2.25.34 1.44 175-601-218 3/8-24 UNF 3/8 2.50.44 1.63 175-601-222 3/8-24 UNF 7/16 2.88.50 1.88 175-601-487 3/8-24 UNF 1/2 3.00.57 1.88 175-601-220 7/16-20 UNF 3/8 2.50.44 1.63 175-601-226 1/2-20 UNF 7/16 2.88.50 1.88 175-601-230 1/2-20 UNF 1/2 3.00.57 1.88 1. Includes Pin, Washer and Cotter Pin. 2. Length is from centre to pin to end of barrel. 15
ACCESSORIES WELDABLE BUNG Inch Series G O D1 D2 d L1 L2 L3 Fit tube OD x Wall BUN8R(L) 1/2-20 0.67 1.000 0.865 0.55 1.75 0.75 0.08 1x0.0625 BUN10R(L)-1 5/8-18 0.77 1.125 0.950 0.65 1.75 0.75 0.08 1.125x0.083 BUN10R(L)-2 5/8-18 0.88 1.250 1.00 0.7 1.75 0.75 0.08 1.25x0.12 BUN12R(L)-1 3/4-16 0.88 1.250 1.05 0.77 1.75 0.75 0.09 1.25x0.095 BUN12R(L)-2 3/4-16 0.88 1.250 1.00 0.77 1.75 0.75 0.09 1.25x0.12 BUN12R(L)-3 3/4-16 0.95 1.500 1.00 NA 1.75 0.75 0.09 1.5x0.25 BUN14R(L) 7/8-14 1.25 1.500 1.182 0.90 1.75 0.75 0.11 1.5x0.15 BUN16R(L)-1 1-14 1.45 1.750 1.235 1.10 2.50 1.00 0.15 1.75x0.25 BUN16R(L)-2 1-14 1.45 1.750 1.495 1.10 2.50 1.00 0.15 1.75x0.12 BUN16R(L) 1 1/4-12 1.45 1.750 1.495 1.35 2.50 1.00 0.15 1.75x0.12 1. Material to be carbon steel, or chrome moly steel. 2. Length and fits tube can be based on different customer s requirements. 3. OD D1 can be HEX type as optional. 4. Suffix R or L for thread right hand or left hand. 16
ACCESSORIES MISALIGNMENT INSERT SPACER Metric and Inch Series D1 D1 D2 d L1 L2 HSP0.500-0.375 0.62 0.62 0.500 0.375 0.50 0.28 HSP0.625-0.500 0.75 0.75 0.625 0.500 0.75 0.31 HSP0.750-0.500 0.88 0.88 0.750 0.500 0.85 0.36 HSP0.750-0.625 0.88 0.88 0.750 0.625 0.85 0.36 HSP1.000-0.625 1.23 1.23 1.000 0.625 1.10 0.62 HSP1.000-0.750 1.23 1.23 1.000 0.750 1.10 0.62 Dimensions in Millimeters D1 D1 D2 d L1 L2 HSPM8-M6 10 10 8 6 11 5 HSPM10-M8 13 13 10 8 13 6 HSPM12-M8 15 15 12 8 14 7 HSPM12-M10 15 15 12 10 14 7 HSPM16-M12 20 20 16 12 19 9 HSPM20-M16 24 24 20 16 21 10 1. Material to be carbon steel, zinc plating clear or yellow, or stainless steel. 2. Length, OD, ID can be customized made based on any individual requirements. 17
ACCESSORIES CORE SPACER Metric and Inch Series Dimensions in Millimeters (B 12mm) A B C D E F CSP M6 19.05 6 8.8 4.3 1.5 15.5 CSP M8 2.05 8 10.4 4.3 1.5 16.6 CSP M10 23.67 10 12.8 4.6 1.6 19.5 CSP 3/8 23.67 9.53 13 4.6 1.6 19.5 CSP 7/16 28.45 11.11 14.7 5.6 2 22.5 CSP M12 28.45 12 15.3 5.6 2 22.5 Dimensions in Millimeters (B 12mm) A B C D E CSP 1/2 22.2 12.76 17.5 11.1 5 CSP M14 24 14.06 16.8 11.1 5 CSP 5/8 25.4 16.06 21 11.1 5 CSP M16 25.4 16.06 21 11.1 5 CSP M18 28 18.06 21.8 11.1 5 CSP 3/4 29.4 19.11 24.5 11.1 5 CSP M20 30 20.06 24.2 11.1 5 1. Material to be carbon steel, zinc plating clear or yellow, or stainless steel. 2. Length, OD, ID can be customized made based on any individual requirements. 18
SRE Australia Pty Ltd PO Box 7292 Brendale Qld 4500 Phone: 07 3881 0400 www.sreaustralia.com.au