BALL JOINT AS SEM BLIES Sec. 24 Rod End Ball Joints (Male)
|
|
- Rodney Anderson
- 5 years ago
- Views:
Transcription
1 BA JOINT AS SEM BIES Sec. 24 od End Ball Joints (Male) Bearing aceway - ocked in by annular groove-trunnion design. Outer Member (Housing) - ow carbon steel, plated plus dichromate treated for corrosion Spherical Ball - Precision make from selected low carbon steel-case hardened - file hard. Plated plus dichromate treated for corrosion eft Hand - Available with left hand thread in most sizes. Marked for easy user identification Size (A) 0-32 /4-28 5/6-24 3/ /6-20 AA E G H J M N / / / od End Ball Joints (Fe male) Bearing aceway - ocked in by annular groove-trunnion design. Spherical Ball - Precision make from selected low carbon steel-case hardened - file hard. Plated plus Size (A) 0-32 /4-28 5/6-24 3/ /6-20 AA E G H J M N O P Outer Member (Housing) - ow carbon steel, plated plus dichromate treated for corrosion eft Hand - Available with left hand thread in most sizes. Marked for easy user identification / / / Copy right 2008, Au-ve-co Prod ucts Co. "SINCE 96" THE COM PETE FAS TENE INE 597
2 Sec. 24 od End Ball Joints (Male with Stud) Bearing aceway - ocked in by annular groove-trunion design. ed Stud - Made from medium carbon steel. Spherical Ball - Precision make from selected low carbon steel-case hardened - file hard. Plated plus BA JOINT AS SEM BIES Outer Member (Housing) - ow carbon steel, plated plus eft Hand - Available with left hand thread in most sizes. Marked for easy user identification. B C D E F G H J K M N Size (A) Pkg / / / / od End Ball Joints (Fe male with Stud) Bearing aceway - ocked in by annular groove - trunion design. ed Stud - Made from medium carbon steel Spherical Ball - Precision make from selected low carbon steel - case hardened - file hard. Plated plus Outer Member (Housing) - ow carbon steel, plated plus eft Hand - Available with left hand thread in most sizes. Marked for easy user identification. Size (A) B C D E F G H J K M N O P U. P. The / / / / / / / THE COM PETE FAS TENE INE "SINCE 96" Copy right 2008, Au-ve-co Prod ucts Co.
3 Damper Control Swivels The units are made from low carbon steel and are plated and The set screws are made of low carbon steel, plated and dichromate treated for corrosion Set screws are case hardened. A rubber disc is used in the assembly. BA JOINT AS SEM BIES Sec. 24 Size Part Number ess nut and washer Damper Control Swivels Pkg Part Number With nut and washer /4-28 x 9/6" /4-20 x 7/6" /4-20 x 9/6" /6-24 x 3/4" Crank Arms (2 Gauge Steel) Bore Description Diameter 2050 Short Series Crank Arm for 3/8" Shaft.385/.389 Copy right 2008, Au-ve-co Prod ucts Co. "SINCE 96" THE COM PETE FAS TENE INE 599
4 Sec. 24 BA JOINT AS SEM BIES ( Flat Top -Shurseal) Materials of construction - Made of low carbon steel with ball studs case hardened. Plated and Wrench A B C D E Size F G H J K /6 7/6 /8 3/8 5/6 5/6 7/8 5/32-5/ /4-28 5/32 9/6 /8 7/6 3/8 3/8 3/32 7/32-5/ /6-24 7/32 /6 5/32 /2 7/6 7/6 -/8 9/32-9/ /8-24 /6 7/8 3/6 5/8 /2 /2-3/8 3/6-3/ /6-20 7/8 -/8 /4 3/4 5/8 5/8-5/6 -/8 2-/ Quick Disconnect Key Hole design on retaining sleeve insures positive alignment of sleeve with ball cavity. Materials of construction - Body and ball are of low carbon steel, with ball studs case hardened. All components except stainless steel spring are plated and yellow dichromate treated for greater corrosion A B C D E F G H J K /4-28 5/32 9/6 /8 9/6 3/8 3/32 7/32 -/ /6-24 7/32 /6 5/32 5/8 7/6 -/8 9/32-29/ /8-24 /6 7/8 3/6 3/4 /2-3/8 3/6-3/ THE COM PETE FAS TENE INE "SINCE 96" Copy right 2008, Au-ve-co Prod ucts Co.
5 BA JOINT AS SEM BIES Sec. 24 (ightweight) Materials of construction - Made of low carbon steel. s are plated and A rubber disc is used.. DI MEN SIONS G.M.C. Part No A B C D E F / /32 9/6 7/6 5/6 9/6 Disconnecting Materials of construction - Made of low carbon steel. Both ball stud and ball cavity are case hardened. Plated and The retaining clip is heat treated spring steel, plated for corrosion resistance A C G H J M NF 7/6 7/8 3/64-5/ NF NF 9/6 7/8 3/64-5/32 /4-28UNF /4-28UNF 9/6 3/32 7/32 -/4 /4-28UNF /4-28UNF 7/6 3/32 7/32 -/4 0-32NF Copy right 2008, Au-ve-co Prod ucts Co. "SINCE 96" THE COM PETE FAS TENE INE 60
6 Sec. 24 Spring oaded BA JOINT AS SEM BIES Materials of construction - Made of low carbon steel. Seat members are made of C008 steel. Both ball stud and seats are case hardened. Assemblies are plated and. Part No. G.M.C. G.M.C. A B C D E F G H J K Spring oaded /6 7/6 /8 3/8 5/6 7/8 7/6 -/ /4-28 5/32 9/6 /8 7/6 3/8 3/32 /2-3/8.5 ( FAT TOP ) Materials of construction - Made of low carbon steel with ball studs case hardened. Plated and clear dichromate treated for corrosion. A B C D E Wrench Size F G H J K /6 7/6 /8 3/8 5/6 5/6 7/8 5/32-5/ /4-28 5/32 9/6 /8 7/6 3/8 3/8 3/32 7/32-5/ /6-24 7/32 /6 5/32 /2 7/6 7/6 -/8 9/32-9/ /8-24 /6 7/8 3/6 5/8 /2 /2-3/8 3/6-3/ /6-20 7/8 -/8 /4 3/4 /6 5/8-5/6 -/8 2-/ /2-20 7/8 -/8 /4 3/4 5/8 5/8-5/6 -/8 2-/ THE COM PETE FAS TENE INE "SINCE 96" Copy right 2008, Au-ve-co Prod ucts Co.
7 BA JOINT AS SEM BIES Sec. 24 Only Avail able Fully As sem bled. Ball Joint As sem blies Male and Fe male, Spring oaded Automotive Use - General Purpose. Size SAE /4-28 SAE Ball Joint As sem bly 3/8-24 Male and Fe male Automotive Use - General Purpose UNIT PACKAGE: 5 Yoke Ends Zinc Fin ished Drop Forged Yoke Ends Ad just able T In Inches Tap Size A B C D E F G H K 0737 / /6 7/6 -/4 9/32 5/8 /4 3/4 / / /6 7/6 -/4 9/32 5/8 /4 3/4 / / /4 /2 /2-7/6 /32 3/4 5/6 3/6 9/ / /4 /2 /2-7/6 /32 3/4 5/6 3/6 9/ / /2 5/8 5/8-5/8 7/6 7/8 3/8 7/8 / / /2 5/8 5/8-5/8 7/6 7/8 3/8 7/8 / / /8 23/32 23/32-7/8 /2 7/6 3/ / /8 23/32 23/32-7/8 /2 7/6 3/ / /6 3/6-7/8 9/6 -/8 /2 -/8 5/ / /6 3/6-7/8 9/6 -/8 /2 -/8 5/ / /6 -/6 -/6 3-/6 /6-3/8 5/8 -/4-3/ / /6 -/6 -/6 3-/6 /6-3/8 5/8 -/4-3/6 2 For Clevis Pins see page 29 of this cat a log. Copy right 2008, Au-ve-co Prod ucts Co. "SINCE 96" THE COM PETE FAS TENE INE 603
BALL JOINT AS SEM BLIES
od End Ball Joints (Male) Bearing aceway - ocked in by annular groove-trunnion design. BA JOINT AS SEM BIES Outer Member (Housing) - ow carbon steel, plated plus dichromate treated for corrosion resistance.
More informationHIGH PERFORMANCE MALE ROD ENDS - ALUMINIUM. Dimensions in Inches. d 2. Ref
ROD ENDS SRE Australia supply a comprehensive range of quality Rod Ends www.sreaustralia.com.au SRE Australia Products & Services SRE Australia Pty Ltd was established February 2010, manufacturing Spherical
More information1071 Cast Steel Globe Steam Stop Valve (Flanged)
1071 Cast Steel Globe Steam Stop Valve (Flanged) Flanged Ends to DIN 2545 PN 40. Straight Pattern, Outside Screw, Yoke Type, Rising Stem, Bolted Bonnet. Renewable 13% Cr. Stainless Steel (S.S 410) working
More informationCryogenic Service Valves
Cryogenic Service Valves Superlok cryogenic valves are used in many industries in a broad range gas service such as oxygen, nitrogen, argon and more. The valves incorporate specialized materials that maintain
More informationDOORS/HATCHES DOORS/HATCHES LET US KNOW YOUR REQUIREMENTS WATERTIGHT DOORS HATCHES SCUTTLES PORT LIGHTS PHONE FAX
DOORS/HATCHES WATERTIGHT DOORS HATCHES SCUTTLES PORT LIGHTS LET US KNOW YOUR REQUIREMENTS 7 #00 -DOG FUMELIGHT DOOR #0 4-DOG WEATHERTIGHT DOOR #0 6-DOG WATERTIGHT DOOR #0 6-DOG SQUARE CORNER DOOR #04 6-DOG
More information1.2 REFERENCES.1 American National Standards Institute (ANSI)/American Society of Mechanical Engineers (ASME).
Issued 2005/06/01 Section 15112 Valves Cast Iron, Gate, Globe, Check Page 1 of 8 PART 1 GENERAL 1.1 RELATED SECTIONS.1 Section 01355 Waste Management and Disposal 1.2 REFERENCES.1 American National Standards
More informationD-1 FIRE PROTECTION PRODUCTS TAPPING VALVE. MUELLER Tapping Valves. MUELLER Tapping Sleeves and Crosses. MUELLER Stainless Steel Tapping Sleeves
TAPPING VALVE MUELLER Tapping Sleeves and Crosses Full range of Tapping Sleeves and Crosses to fit most types of pipe including cast iron, ductile iron, A-C, and cast iron O.D. PVC--Also outlet sealed
More informationArms Group Drainage System. 1. Swivel Joint Type 2. Pivot Joint Type 3. Flexible Hose Type 4. Swing Master Joint Type 5. Floating Check Valve
Arms Group Drainage System 1. Swivel Joint Type 2. Pivot Joint Type 3. Flexible Hose Type 4. Swing Master Joint Type 5. Floating Check Valve Swivel Joint Type Model No. 1010 Sizes 3in through 8in Heavy
More informationBore Code 1 1/8" mm 121
/8" (2) Bore Model Number Model Number Code Leave blank if none desired D 2 X MR Metric M See pages.7,.3 &.34 Bore Code /8" 2 28.5mm 2 T Series HOW TO ORDER Sound limiters: Rod end -LF Includes PTFE. Under
More informationHi-MOD Architectural Wire and Rod Tension Systems
Hi-MOD Architectural Wire and Rod ension Systems INDEX Adjuster orks ircular ocking Nuts ixed orks Double Headed levis ins ie bars Bar ouplers Disclaimer Wire Rigging & erminations Marine & ifting Shackles
More informationSERVICE PARTS LIST. SPECIFY CATALOG NO. AND SERIAL NO. WHEN ORDERING PARTS M18 1/4" Hex Impact Driver - Two Speed STARTING SERIAL NO.
00 0 EXAMPLE: Component Parts (Small #) Are Included When Ordering The (Large #). IMPORTANT NOTE: Gearcase end cap #4 is LEFT HAND THREAD! As an aid to assembly, carefully lower the complete front end
More informationDRAINS: & , S COMMERCIAL. Drains: Bath, Shower & Commercial
DRAINS: BATH,, SHOWER &, S COMMERCIAL SHOWER DRAINS GENERAL PURPOSE DRAINS FIT-FLUSH CLEAN-OUTS BATH WASTES BATH WASTES KITS/PARTS/COMPONENTS BATH DRAIN BODIES/ASSEMBLIES BATH DRAIN KITS/PARTS/COMPONENTS
More information1.2 REFERENCES.1 American National Standards Institute (ANSI)/American Society of Mechanical Engineers (ASME)
Issued 2005/06/01 Section 15113 Valves Cast Steel: Gate, Globe, Check, Ball Page 1 of 5 PART 1 GENERAL 1.1 RELATED SECTIONS.1 Section 01355 Waste Management and Disposal 1.2 REFERENCES.1 American National
More informationALLOY BALL VALVES 7000 SERIES METAL AND SOFT SEATED 150# TO 2500#
ALLOY BALL VALVES 7000 SERIES METAL AND SOFT SEATED 150# TO 2500# The Jarecki 7000 Series ball valves are available in a variety of materials, end connections, and seat materials. They are a proven in
More informationType 431, 433 PN 160. Facts. Flanged Safety Relief Valves spring loaded. The-Safety-Valve.com. Metric Units LWN E
Type 431, 433 PN 160 Metric Units Flanged Safety Relief Valves spring loaded Facts The-Safety-Valve.com LWN 465.03-E 40 Cap H2 18 Adjusting screw with bushing 19 Lock nut 16 Upper spring plate 12 Spindle
More informationWave Spring Introduction
Wave Spring Introduction All Springs Are Not Equal Smalley Wave Springs offer the unique advantage of space savings when used to replace coil springs. By reducing spring operating height, wave springs
More informationNEW Items. Wire Rope and Accessories. Eye Nuts, Bolts and Turnbuckles. Roller Chain. kent-automotive.com NI1
In the digital version, you can navigate to each section by clicking on the page numbers. You can return to the Table of Contents by clicking in the header. Wire Rope and Accessories Wire Rope Commercial
More informationGeneral Service Butterfly Valves. Series 120, 140, 160, 300
General Service Butterfly Valves Series 0, 0, 0, 00 Av-Tek Butterfly Valves Concentric Series Technical Data Size Range: Series 0 - " to " Wafer Series 0 - " to 0" Lug Series 0 - " to " Flanged Series
More information1.2 ACTION AND INFORMATIONAL SUBMITTALS.1 Provide submittals in accordance with Section Submittal Procedures.
BID OPPORTUNITY NO. 253-2011 PAGE 1 OF 7 PART 1 GENERAL 1.1 REFERENCES.1 American Society of Mechanical Engineers (ASME).1 ASME B31.1, Power Piping, B31.3 Process Piping, B31.9 Building Services Piping..2
More information* MANUFACTURED AFTER JULY 2014
R STYLE 0 0 ASSEMBLY NOTES: USE PARKER O-LUBE ON ALL O-RINGS AND MATING SURFACES, UNLESS OTHERWISE NOTED. * MANUFACTURED AFTER JULY 0 PRODUCT MERCURY MASTER 000 0 CENTER WITH LUG USE PERMABOND LM OR LOCTITE.
More informationNew PTO Drive Shaft Assemblies METRIC Replacement driveshafts for Bondioli and Pavesi Metric series 2 through 8. A B C Compressed Length
New PTO Drive Shaft Assemblies METRIC Replacement driveshafts for Bondioli and Pavesi Metric series 2 through 8 A B C Tractor QD Pin yoke Bore Metric Series Warning: The inner profile tube must engage
More information443C. Parts Manual. MM Rev. 05 (06 93)
443C Parts Manual MM294 578-748 Rev. 05 (06 93) This manual is furnished with each new TENNANT Model 443C. This manual consists of the Standard Parts; Options; Breakdowns; and Cross Reference sections.
More informationEquipment Catalog. For inquiries and orders, please contact:
Equipment Catalog 1 2 Table of contents...pages Force Flow 100 Lube Pump... 4 Bucket Pumps... 5 Packing Injection Fitting Body Vent (Bleeder) Fittings... 6 1200 & 1500 Lube Pumps... 7 Hose Assemblies Gages
More informationLIST OF PUBLISHED STANDARDS
Report : 08-0-6 Of 6 Total Count: 8 SABS/TC 004 50-:005/ISO -:000 Rolling - Tolerances Part : Terms 005-0-04 and definitions 0-07-9 50-:005/ISO -:00 5:007/ISO 76:006 Rolling - Tolerances Part : Measuring
More information...our linkages, your solution. Rod Ends
...our linkages, your solution ov-rod-ends-divider - Updated - 12-01-2017 Technical Information Introduction All of our rod ends incorporate either a plain spherical bearing, ball bearing, or roller bearing.
More informationDESCRIPTION UOM KEI# OEM#
ADAPTOR SCREW EA. AS-1070 755A010 AIR HOSE, NYLON AMERICAN STYLE, 20" EA. AS-3563 ---------- AIR HOSE, NYLON EUROPEAN STYLE, 20" EA. AS-3564 AIR HOSE, STAINLESS STEAL AMERICAN STYLE, 20" EA. AS-3565 ----------
More informationLIST OF PARTS STYLE CATALOG No. 15M (Supplement to Catalog No. 75L) FOR. The Edgelock Machines Forty-Three Thousand Series
INDUSTRIAL SEWING LEW IS COLUMBIA MACHINES CLASS 43400 LIST OF PARTS FOR STYLE 434008 The Edgelock Machines Forty-Three Thousand Series CATALOG No. 15M (Supplement to Catalog No. 75L) Includes all parts
More informationUL / FM D-1 FIRE PROTECTION PRODUCTS TAPPING VALVE. MUELLER Tapping Sleeves and Crosses. MUELLER Tapping Valves
UL / FM TAPPING VALVE SECTION Rev. 2-15 MUELLER Tapping Sleeves and Crosses Full range of Tapping Sleeves and Crosses to fit most types of pipe including cast iron, ductile iron, A-C, and cast iron O.D.
More informationLOAD BEARING ROLLER ASSEMBLIES Engineering Data Installation Notes
Installation Notes INSTALLING STUD TYPE LOAD BEARING ROLLER ASSEMBLIES Mounting holes should be machined to the nominal stud size within +.001/-.000 (+.025mm / -.000mm) tolerance. When properly aligned,
More informationHoist hooks incorporate markings forges into the product which address two (2) QUIC- CHECK features. Shank Hooks Stock No Bronze S-319- BN
S-319 / S-319N Hoist hooks incorporate markings forges into the product which address two (2) QUIC- CHECK features. Patented trademark indicates QUIC-CHECK product. Hook I.D. Codes: A - Alloy Steel, B
More informationCAST IRON NON-RETURN VALVE SWING TYPE (Reflux Valve)
about us With the "COMMITMENT TO EXCELLENCE" drive, NVR is becoming a foremost name in bronze, brass, cast iron, cast seel and forged steel valves for domestic and industrial applications. Having the most
More informationFor outdoor installations, see Vale Engineering Standard Specification SPEC
SPEC-3023 1/7 1.0 PURPOSE This specification describes the minimum requirements for dry (less than 100 ppm H20) gaseous sulphur dioxide at pressures up to and including 10 PSIG for indoor service. Do not
More informationA. Division 01: Administrative, procedural, and temporary work requirements apply to this section.
Copyright 2016 Metal Roof Innovations, Ltd. www.s-5.com SECTION 26 31 00.01 PHOTOVOLTAIC COLLECTOR ATTACHMENT SYSTEM PART 1 - GENERAL 1.1 SUMMARY A. Section Includes: 1. Photovoltaic Collector Attachment
More informationMODEL 3200 / 3201 CONTENTS. Installation, Operation, and Maintenance Instructions 1.0 GENERAL 2.0 INSTALLATION 3.0 OPERATION 4.
Installation, Operation, and Maintenance Instructions MODEL 3200 / 3201 March 2002 CONTENTS 1.0 GENERAL 1.1 Model Number ----------------------------------------------------------------------------------------------
More informationMODEL 3200 / 3201 CONTENTS. Installation, Operation, and Maintenance Instructions 1.0 GENERAL 2.0 INSTALLATION 3.0 OPERATION 4.
Installation, Operation, and Maintenance Instructions MODEL 3200 / 3201 March 2002 CONTENTS 1.0 GENERAL 1.1 Model Number ----------------------------------------------------------------------------------------------------------
More informationSECTION DETENTION WINDOW SCREENS. 1. Detention screens for interior and exterior installations at exterior windows in existing buildings.
SECTION 08 56 66 DETENTION WINDOW SCREENS SPEC WRITER NOTE: Delete text between // // not applicable to project. Edit remaining text to suit project. PART 1 - GENERAL 1.1 SUMMARY A. Section Includes: SPEC
More informationConcrete Screw-Anchors
Screw-Anchors Screw-Anchor are a totally removable rotation setting, thread forming anchor, ideal for either temporary or permanent anchoring into substrates such as concrete, brick, hollow brick or block.
More informationNotes Changed note Date. 1 (A) Changed template 09 / 07 / 2008
Revisions Notes Changed note Date 1 (A) Changed template 09 / 07 / 2008 2 Changed template. Clause 12.5.4.1 hot-rolled steel added. Clause 12.5.4.2, 12.5.2.4, 12.5.3.4, 12.5.4.4, 12.5.5.4, 12.5.6.4, 12.5.7.4
More informationINDUSTRIAL THREADED PRODUCTS, INC.
INDUSTRIAL THREADED PRODUCTS, INC. (800) 976-Bolt PRODUCTS & SERVICES CORPORATE HEADQUARTERS 3580 Firestone Blvd., Santa Fe Springs, CA 90670 (562) 802-4626 (74) 52-5902 Fax: (562) 802-464 BRANCH SALES
More informationPANEL BUSHINGS Brass Plated. SPLIT BUSHINGS Brass Plated Aluminum Anodized. CHASSIS FASTENERS Brass Aluminum
PNEL USHINGS rass Plated 3/32 D TLOG NUMER.127.253 11/32-32 THRED -32 THRED EH29-1 EH29-2 SPLIT USHINGS rass Plated luminum nodized.050 MTERIL LUMINUM FINISH PLTED NODIZED TLOG NUMER EH29-3 EH29-4 HIS
More informationBase Models: 1-22SV Major Components GOULDS PUMPS. Commercial Water
Base Models: 1-22SV Base Models: 1-22SV F, P, R VERSIONS 1 Pump Body Stainless Steel AISI 304 EN 10088-1-X5-CrNi-10 (1.4301) 2 Impeller Stainless Steel AISI 304 EN 10088-1-X5-CrNi-10 (1.4301) 3 Diffuser
More informationA wide range of cold-formable steel grades and aluminium alloys are used as wire materials within a diameter range from 5 mm to 34 mm.
Cold-Formed Parts 2 ESKA manufactures complex precision cold-formed parts for applications with large and medium quantities. The highly-efficient cold- forming process ensures economic manufacture of near-net-shape
More informationSPECIAL STEELS. Quality is not just passable, its Paramount.
SPECIAL STEELS Quality is not just passable, its Paramount. SPECIAL STEELS About us Kadimi Special Steels is a leading steel company in India. We are an Indo-Japanese joint venture between Kadimi and Nakagawa
More informationMechanical Properties - Standard. Standard Mild Steel Studs AWS Type A
General Material Specifications Material Specifications Nelson s studs may be made of one of the following materials, as specified on individual specification sheets. Certificates of chemical analysis
More information4.3. Reflector VR10. Rectangular, corner-cube reflector. Temperature range -4 F to +140 F FE-RR15. Rectangular, corner-cube reflector
Polarized retro-reflective sensors must use corner-cube reflectors. Micro-structure, corner-cube reflectors are used with laser retro-reflective sensors with short sensing distances. Thru-hole 19.2 72
More information2 5 0 P. S. I. G. AMERICAN DARLING 5 1 /4" B-84-B FIRE HYDRANT
2 5 0 P. S. I. G. AMERICAN DARLING 5 1 /4" B-84-B FIRE HYDRANT CONSTRUCTION OPERATING NUT-cast one piece bronze operating nut. Design of the operating thread permits slow closing of the hydrant valve,
More informationSECTION SLUICE GATES
SECTION 11100 SLUICE GATES PART 1--GENERAL Fill in the blank with a short description of sluice gate usage, i.e., for isolation of wastewater, or for tank drainage, or for control of water surface. 1.01
More informationTECHNICAL SERVICE PARTS
R STYLE, 0-0- INLET USE PERMABOND LM OR LOCTITE. USE MOBILITH SHC 0. OUT PLUG /-/ TURN. TIGHTEN UNTIL SLIGHT DRAG IS ON ITEM. 5 0 x 0 x USE PRIMER T AND PERMABOND HH0 OR LOCTITE. x 0 5 0 0 AND MATING PART
More informationOVERSHOT GATE TECHNICAL DATA SHEET
FRESNO OVERSHOT GATE TECHNICAL DATA SHEET Applications Fresno Overshot Gates effectively control upstream and downstream levels of canals. Improved flow control is achieved through the use of this fully
More information8000 PIVOT EXPORT 6-5/8" PIPE 90" COUPLER SPACING
8000 PIVOT EXPORT 6-5/8" PIPE 90" COUPLER SPACING PICTURE Copyright 2009 Valmont Industries, Inc. 8PSP0097 09-97 6-5/8" Export Pipe - 90" Spacing Truss Package Locations 09-0 35' Span 3 5 3 57.5' Span
More informationBerliss Companies 644 Route 10 P.O. Box 45 Livingston, NJ Phone: (973) Fax: (973)
Berliss Companies 644 Route 10 P.O. Box 45 Livingston, NJ 07039 Phone: (973) 992-4242 Fax: (973) 992-6669 www.berliss.com Capabilities Catalog 2008-2009 Thinking Custom? Think Berliss. Berliss is an industry
More informationHigh Temperature Aging Cell Instruction Manual
High Temperature Aging Cell Instruction Manual Part No. 760140001EA Rev. D TABLE OF CONTENTS Section Page Figure 1 General Information... 1 2 Safety Considerations... 3 3 Un-pressurized Testing Procedure...
More informationTechnology that works for you.
Technology that works for you. WATER WELL & MINERAL EXPLORATION Drilling accessories designed for use in Water Well and Mineral Exploration are illustrated in this brochure and are manufactured to the
More informationON-ROOF ATTACHMENT FLAT COLLECTOR HELIOSTAR
ON-ROOF ATTACHMENT FLAT COLLECTOR HELIOSTAR INSTALLATION INSTRUCTIONS ENERGY AND SANITARY SYSTEMS Installation requirements Generel requirements The on-roof attachment set is capable for installation of
More informationINSTRUCTIONS FOR THE ASSEMBLY AND INSTALLATION OF THE VORTOX LIQUID SAMPLER
INSTRUCTIONS FOR THE ASSEMBLY AND INSTALLATION OF THE VORTOX LIQUID SAMPLER I. SAMPLER SUSPENDED BY CABLE The Vortox Liquid Sampler is a precision instrument manufactured of stainless steel, easy to install,
More informationKTM Fire-safe and Anti-Static ASME 150/300 one piece, end entry, flanged ball valve for oil, gas, petrochemical and chemical industries
TM Fire-safe and Anti-Static ASME 150/300 one piece, end entry, flanged ball valve for oil, gas, petrochemical and chemical industries Features eneral applications Ideally suited for use in the oil and
More informationSTAINLESS STEEL DELIVERY PROGRAM CONTENTS
DELIVERY PROGRAM CONTENTS INTRODUCTION 1 FLAT BAR 2 PLATE 4 SPECIALTY BLOCKS 5 ROUND BAR 6 SQUARE BAR 8 HEXAGON BAR 8 SHEET 9 ROUND TUBING 10 SQUARE TUBING 10 PIPE 11 HYPODERMIC TUBING 11 ANGLE 12 THREADED
More informationSERVICE PARTS LIST. 7/8" (22mm) SDS ROTARY HAMMER. ABH-22 A002A See page 5 BULLETIN NO. A CATALOG NO.
00 0 EXAMPLE: Component Parts (Small #) Are Included When Ordering The Assembly (Large #). SERVICE PARTS LIST SPECIFY CATALOG NO. AND SERIAL NO. WHEN ORDERING PARTS 7/8" (22mm) SDS ROTARY HAMMER CATALOG
More informationFIGURE 1. INSERT, SCREW THREAD.
INCH-POUND 5 May 2015 SUPERSEDING MIL-I-45932/3B 2 May 1994 DETAIL SPECIFICATION SHEET INSERT, SCREW THREAD THIN WALL, LOCKED IN, OVERSIZE REPLACER This specification is approved for use by all Departments
More informationBolted Two Piece Carbon Steel and Stainless Steel FLOATING BALL VALVE
Bolted Two Piece Carbon Steel and Stainless Steel FOATING BA VAVE Floating Valve Features: Bolted -Piece Construction Cast Steel 50 & 00 Forged Steel 00 to 500 Fire safe SS trim/cs ENP All valves NACE
More informationSERVICE PARTS LIST SPECIFY CATALOG NO. AND SERIAL NO. WHEN ORDERING PARTS. M18 FUEL 1-1/2" Linemen Magnetic Drill CATALOG NO. STARTING SERIAL NUMBER
(7x) 48 4 SERVICE PARTS LIST SPECIFY CATALOG NO. AND SERIAL NO. WHEN ORDERING PARTS M18 FUEL 1-1/2" Linemen Magnetic Drill CATALOG NO. 7 7 2788-20 77 83(3x) STARTING SERIAL NUMBER 144 79 G7A REVISED BULLETIN
More information4 1 /2 MARK 73-5 AMERICAN FLOW CONTROL. It s What We Know. AMERICAN-DARLING FIRE HYDRANT AMERICAN-DARLING 4 1 /2 MARK 73-5 FIRE HYDRANT
AMERICAN-DARLING FIRE HYDRANT AMERICAN-DARLING FIRE HYDRANT AMERICAN FLOW CONTROL It s What We Know. CONSTRUCTION AMERICAN-DARLING FIRE HYDRANT OPERATING NUT Cast one-piece bronze operating nut. Design
More informationSPECIFICATIONS - DETAILED PROVISIONS Section Stainless Steel Sluice Gates C O N T E N T S
SPECIFICATIONS - DETAILED PROVISIONS Section 11294 - Stainless Steel Sluice Gates C O N T E N T S PART 1 - GENERAL... 1 1.01 SUMMARY... 1 1.02 REFERENCES... 1 1.03 DEFINITIONS... 1 1.04 DESIGN REQUIREMENTS...
More informationAmerican Metal Specialties, Inc.
American Metal Specialties, Inc. www.cablerailings.com (253) 272-9344 (253) 627-3843 Fax PART 1 GENERAL 1.1 SECTION INCLUDES SECTION 05 73 00 STAINLESS STEEL ORNAMENTAL HANDRAILS AND RAILINGS For best
More informationNote: Above dimensions will vary due to manufacturer s tolerances. Metric sizes also available.
1 Note: Above dimensions will vary due to manufacturer s tolerances. Metric sizes also available. 2 Note: Above dimensions will vary due to manufacturer s tolerances. Metric sizes also available. 3 Note:
More informationCover Page - Series 60 Wafer Check Valves
DESCRIPTION Cover Page - Series 60 Wafer Check Vs Standard Features Section 2 Index BULLETIN NO. CV-100 CV-101R3 VALVE DIMENSIONS - DIN 3202 DRAWING NO. 2 to 12 (Inches) / CV Values & Construction Materials
More informationBolted Three Piece Forged Steel TRUNNION BALL VALVE
Bolted Three Piece Forged Steel TRUNNION BA VAV Trunnion Valve Features: Forged -piece construction Fire safe design ouble block and bleed design C.S. trim with mil NC ISO mounting pads Sealant injection
More informationSERVICE PARTS LIST BULLETIN NO M18 FUEL 1-1/2" Magnetic Drill CATALOG NO. G96A
65(7x) 48 64 CATALOG NO. SERVICE PARTS LIST SPECIFY CATALOG NO. AND SERIAL NO. WHEN ORDERING PARTS M18 FUEL 1-1/2" Magnetic Drill 67 76 2787-059 77 83(3x) STARTING SERIAL NUMBER 79 G96A Torque Chart on
More informationDETAIL SPECIFICATION SHEET TEE, TUBE TO SWIVEL, SWIVEL ON BRANCH, 37 DEGREE FLARED
INCH-POUND MS51524C 15 November 2017 SUPERSEDING MS51524B 17 March 2016 DETAIL SPECIFICATION SHEET TEE, TUBE TO SWIVEL, SWIVEL ON BRANCH, 37 DEGREE FLARED Reactivated after 15 November 2017 and may be
More informationSERVICE PARTS LIST SPECIFY CATALOG NO. AND SERIAL NO. WHEN ORDERING PARTS CORDLESS 18V COMPACT BAND SAW STARTING C14A SERIAL NO.
00 0 EXAMPLE: Component Parts (Small #) Are Included When Ordering The Assembly (Large #). FIG. PART NO. DESCRIPTION OF PART NO. REQ. 0-- 0- x /" Pan Hd. Tapt. T- Screw () 0--00 M Pan Hd. T-0 Screw ()
More informationReplaces Ryan GA30-06 Parts
Replaces Ryan GA30-06 Parts 9 4 1 6 2 7 8 3 Item R&R O.E.M. Req. No. Part No. Part No. Description Qty. 1 R233 233 R&R Ball Bearing, Connecting Rod 8 1 R2333 2333 R&R Ball Bearing, Crankshaft 4 1 R2334
More informationSPECIFICATION SERVICE SADDLE DOUBLE BALE MODEL 314
SPECIFICATION Body Body Gasket Gasket Bale Assembly Bale Nut Flat Washer Strap Assembly Stud Nut Flat Washer Spherical Washer 1 14 SADDLE ASSEMBLY 16 24 SADDLE ASSEMBLY APPLICATIONS Typical Uses Tapping
More informationU.S.A. MADE IN THE U.S.A. Technical Data. Self-Drilling Screw Part Number DB446
Self-Drilling Screw Part Number DB446 10-16 x 3/4 HWH Self-Drilling Screw #10 (.187 O.D.) Point Style: #3 Point (drilling/fastening capacity.187 ) Silver Stalgard Corrosion Resistant Finish Sealing Washer
More information1470 Dale Court Austell, GA Phone: Fax:
1470 Dale Court Austell, GA 30168 Phone: 404-351-2202 Fax: 404-351-2203 LC METALS, INC. PRODUCT INDEX Page # STUD GUARDS...3 FHA STRAPS...3 BOCA PLATES (Nail Plates)...4 PLUMBERS TAPE (Banding Iron)...4
More informationNORTH AMERICA ONLY ROUND CLAMP BAR FOR DIE FASTENING
PRINTED COPY IS UNCONTROLLED NORTH AMERICA ONLY ROUND CLAMP BAR FOR DIE FASTENING NEXT PAGE --> ROUND CLAMP BAR WDX15-80-0101 EACH PART MUST BE PERMANENTLY MARKED WITH THE FULL ORDERING NUMBER AND MANUFACTURER
More informationORBIT Valves STANDARD FEATURES
ORBIT Valves STANDARD FEATURES Cameron s ORBIT valves are ideal for applications when zero leakage and frequent operation are demanded. They are used globally in gas processing plants using molecular sieve
More informationIMPORTANT. Use of safety surfacing (wood mulch) in compliance with ASTM specification F1292 is required. WARNING
INSTALLATION DETAILS Recommended crew (Adult): 2-3 Installation time: 8-12 Hours not including concrete cure time User age: 5-12 Use zone: 22 Diameter Weight: 990 Actual Dimension: 120 Diameter MAINTENANCE:
More informationl MATERIAL SPECIFICATIONS
SECTION 4.5 PAGE 1 / 5 l DESCRIPTION The UCAN Scru-it masonry anchor is manufactured to strict specifications from high quality steel. The proprietary, UCAN designed, scalloped thread cuts deep grooves
More informationOperating Instructions
Operating Instructions Series B37000 Hose Reels BB37118 L CB37118 L EB37118 L12D BB37122 L CB37122 L EB37122 L12D BB37128 L CB37128 L EB37128 L12D Dimensional Data C A B D Part # A B C D BB/CB37118 L 31
More informationThis specification describes the minimum requirements for piping systems for the following service: Plant air systems operating up to 125 PSIG.
SPEC-3501 2016/11/0 1/9 1.0 APPLICATION This specification describes the minimum requirements for piping systems for the following service: Plant air systems operating up to 125 PSIG. Design Conditions
More informationMet al seat ed valves. Inspired By Challenge
Met al seat ed valves Inspired By Challenge Floating Valves 00 C / 75 F 5 C / 000 F 50 C / 00 F Ordering code system Introduction Metal seated ball valve Habonim s tough line of metal seated valves excels
More informationClass 125S/200WOG Bronze Gate Valve Non-Rising Stem, Threaded Ends Testing: BS EN 12288, BS 5154, BS EN Working Pressure: PN16
Class 125S/200WOG Bronze Gate Valve Non-Rising Stem, Threaded Ends Testing: BS EN 12288, BS 5154, BS EN 12266 Working Pressure: PN16 FIG. 201 WORKING PRESSURE Working Pressure Non-Shock (psi) Saturated
More informationAvailable End Connections & Size Range
ECCENTRIC PLUG VALVES Size Range 3"-24" Water Working Hydrostatic Size Range Pressure psi Test psi 3"-12" 175 350 14"-24" 150 300 Available End Connections & Size Range Figure No. Flanged 3"-24" F-5412
More informationSPECIFICATION SERVICE SADDLE DOUBLE STRAP MODEL 317
Gasket Body Body Body Bale Assembly Bale Gasket Assembly Stud Gasket Assembly Stud Spherical Washer 1.25 3 SADDLE ASSEMBLY 4 14 SADDLE ASSEMBLY 16 24 SADDLE ASSEMBLY APPLICATIONS Typical Uses Tapping branch
More informationWorcester Controls 44/ Piece Reduced Ball Valves
Worcester Controls 44/459 3 -Piece Reduced Ball Valves Almost 40 years ago, Flowserve Worcester Controls original 3-piece valve was responsible for the development of the UK ball valve market. The Series
More information83R-200 Series FEATURES STANDARD MATERIAL LIST
83R-200 Series Carbon Steel 3-Piece Full Port Socket Weld Ball Valve With Actuator Ready ISO Mounting Pad 1-1/2 & 2 Socket Weld, 800 psig CWP, Cold Non-Shock. 150 psig Saturated Steam. Vacuum Service to
More informationMETRIC DRIVELINES & COMPONENTS AFTERMARKET PRODUCT GUIDE METRIC DRIVELINES & COMPONENTS
AFTERMARKET PRODUCT GUIDE METRIC DRIVELINES METRIC DRIVELINES 85 SAFETY SECTION SAFETY 2SECTION WARNING! Be certain to disengage PTO shaft and to turn off the tractor before making any operational maintenance
More informationJAG flocomponents n.a. JAG floater features: ...there is always a better way.
JAG flocomponents n.a....there is always a better way. T CANG: The JAG partnership is underpinned by nearly 75 years of flow control experience in the Western Canada basin. The shared vision that lead
More informationSECTION VIBRATION AND SEISMIC CONTROLS FOR ELECTRICAL SYSTEMS
SECTION 260548 - VIBRATION AND SEISMIC CONTROLS FOR ELECTRICAL SYSTEMS PART 1 - GENERAL 1.1 SUMMARY A. Section includes: 1. Isolation pads. 2. Spring isolators. 3. Restrained spring isolators. 4. Channel
More information(G) DOORS & WINDOWS LIST OF BUREAW OF INDIAN STANDARD CODE OF PRACTICE (ISI)
(G) DOORS & WINDOWS LIST OF BUREAW OF INDIAN STANDARD CODE OF PRACTICE (ISI) 4021 : Specification for teak wood. 287 : Recommendation for maximum permissible moisture content 1141 : Specification for code
More informationAdjustable Suspension Hanger Technical Datasheet
Adjustable Suspension Hanger sheet The Adjustable Suspension Hangers Clip are a component of the Keylock Ceiling System. The upper vertical side of the hanger allows the Suspension Rod that goes through
More informationBolted Connectors & Terminals
Disconnect Tee Connecr Type ADT5 75 Body 90 Nom. Function: ADT connecrs provide a convenient means of connecting lugged service conducrs overhead mains conducrs. Construction: Body - High strength cast
More information12.1 MUELLER TAPPING MATERIALS AND SPECIALTY VALVES. MUELLER Tapping Sleeves and Crosses. MUELLER Tapping Valves. MUELLER Stainless Steel Tapping
MUELLER TAPPING MATERIALS AND SPECIALTY VALVES 12.1 Shaded area indicates change Rev. 7-16 MUELLER Tapping Sleeves and Crosses Full range of Tapping Sleeves and Crosses to fit most types of pipe including
More informationItem 442 Metal for Structures
Item 442 Metal for Structures 1. DESCRIPTION 2. MATERIALS Provide structural steel, high-strength bolts, forgings, steel castings, iron castings, wrought iron, steel pipe and tubing, aluminum castings
More informationCast Iron. General Purpose. Valves. Value. Performance. Quality VALVES WAFER TYPE VALVES CAST IRON VALVES PRODUCT CATALOGUE
Value, Performance, Quality PRODUCT CATAOGUE Cast Iron General Purpose Valves Value Performance Quality WAFER TYPE CAST IRON DPI Trading CONFIDENCE IN VAVE TECNOOGY PROUDY IMPORTED BY www.dpitrading.co.za
More informationSP Standard Profile. Flanged to Duct Install Type THERMAL BREAKS OPPOSED ACTION PARALLEL ACTION. T.A. Morrison & Co. Inc.
1 SUBMITTAL DATA Series 9000 BF Thermally Insulated Damper with Thermally Broken Frames & Blades SP Standard Profile Flanged to Duct Install Type THERMAL BREAKS OPPOSED frame is 4 (101.6 mm) deep x 1 (25.4
More informationA. Compatibility: Products shall be suitable for piping service fluids, materials, working pressures, and temperatures.
SECTION 23 05 16 PART 1 - GENERAL 1.01 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification Sections, apply
More informationHigh Performance Thread Rolling Screw for Metal
High Performance Thread Rolling Screw for Metal Features / Benefits ROLOK thread rolling fasteners for metals offer a unique spiral thread form to achieve excellent drive-to-strip performance in many challenging
More informationCD Capacitor Discharge The Process
CD Capacitor Discharge The Process. CD. Capacitor Discharge Why CD Studs are better CD. Capacitor Discharge General Specifications Weld Base: CD. Stud Load/Torque Strengths Stud Material Stud Size Maximum
More informationGoulds Two Stage, Horizontally Split Case Pump
Goulds 3316 Two Stage, Horizontally Split Case Pump 3316 Two Stage, Horizontally Split Case Pumps designed for boiler feed, mine dewatering and other applications requiring moderately high heads with a
More information