polymer additives
Product Innovations Targeted to Customer Demands BrüggemannChemical continuously develops speciality additives in response to the requirements of the market. More than 30 years experience in the polymer industry, along with the technical expertise and close partnerships with customers, are the basis for the timely development of innovative solutions. This enables customers to enhance the value of their products to meet the ever increasing technical demands in their marketplace. A key part of the product range are tailor-made and well-balanced additive packages, so-called One-Packs. These are mixtures of two or more additives and present solutions for specific applications in customized product forms, i.e. as powder, pellet or masterbatch. One-Packs offer significant advantages for polymer producers and converters: n Improved dosing accuracy n Less off-spec material n Homogeneous resin quality n Simplified manufacturing n Lower cost in purchasing, warehousing and quality control B Reduced operating cost! One-Packs as dust-free pellets or granules provide further benefits: n Improved flow-ability, easier conveying and feeding n Better workspace hygiene B Analogous to masterbatch utilization, but more efficient due to almost 100% concentration of active components!
High Performance Additives for Polyamides And other Engineering Thermoplastics BRUGGOLEN H Heat Stabilizers Copper based Antioxidants - Most Efficient Heat Stabilization of Polyamides Classic Copper Salt based Heat Stabilizers Bruggolen H320/H321* H324 H326 TP-H1212 TP-H8017 Copper Complex based Heat Stabilizers (Proprietary) Bruggolen H3386/H3387* H3350/H3351** Bruggolen H3344/H3345* H3376/H3377* Bruggolen H3336/H3346* Highly effective antioxidants for Polyamides: B powerful long-term protection at service temperatures up to 180 C B characteristic bluish or greenish discoloration B excellent quality and homogenity via specific production know-how B variety of stabilizers to serve customer requirements Unique combination of superior Copper based heat stabilization and natural color B long-term heat stabilization over the whole temperature range up to 180 C B excellent UV-stabilization B excellent dispersion B H3351** masterbatch is suited for monofilament and fiber applications Unique combination of long-term Copper based heat stabilization and high Comparative Tracking Index (CTI) up to 600V B especially suited for electrical and electronic applications B with H3376/H3377* no discoloration after conditioning B high extraction resistance; no plate-out B suited for fiber applications Unique combination of superior heat stabilization and high CTI up to 550V Processing Stabilizer Bruggolen H10 Best Protection of Polyamides against Discoloration B reduced yellowing during melt processing B protection against discoloration after ageing by heat and by UV-light B H10 is superior to organic Phosphites because of it s: excellent resistance against high shear stress and elevated temperatures non volatility resistance against hydrolysis B especially suited for glass fiber reinforced Polyamides Heat and Processing Stabilizer Packages based on Phenolic Antioxidants + Synergists Bruggolen H164 Bruggolen H161 Bruggolen H175 Bruggolen H180 Long term protection of Polyamides for technical applications against heat ageing B non discoloring B excellent in glass fiber reinforced or mineral filled Polyamides Long term protection of Polyamide fibers and of unfilled injection / extrusion grades B very good color stabilization, e.g. during storage B non-extractable; no plate-out Very efficient color and long-term heat stabilization of Engineering Thermoplastics B non-extractable, no plate-out B effective also in Polyesters, Polycarbonates and Styrenics B excellent color stabilization Excellent processing stabilizer and antioxidant package for POM B scavanges formaldehyde Stabilizers against Hydrolysis and Aggressive Solvents Amine based Antioxidants Bruggolen H20 H2002 Stabilization against hydrolysis and heat ageing B best protection of polyamides against hot oils, fats and glycols B characteristic brownish translucent discoloration
BRUGGOLEN P Processing Agents Nucleating Agents Bruggolen P22 Bruggolen P250 P252 Lubricating / Demolding packages Bruggolen P12 P14 P130 Highly efficient nucleating agent for Polyamides B reduction of cycle time in injection molding B improved dimensional stability - significant reduction of warping in glass fiber reinforced Polyamides B improved mechanical properties (tensile strength, stiffness, ) B increase of heat distortion temperature B non-volatile; non-extractable Highly efficient nucleating agent for Polyesters B reduction of cycle time in injection molding B improved dimensional stability B improved mechanical properties (tensile strength, stiffness, ) B increase of heat distortion temperature B non-volatile; non-extractable Combination of internal and external lubricants especially for Polyamides (P12, P14 and P130) and Polyesters (P130) B very efficient due to low volatility and high thermal stability B high gloss and good surface protection B improved melt flow B excellent mold release B improved dispersion of fillers B broadened processing window Processing One-Packs for Polyamides (Virgin Grades/Recyclates) Bruggolen P30/P31* P32/P33* P34/P35* Processing Auxiliary (liquid) for Dry Blending Bruggolen P60 Ready-to-use synergistic packages for injection molding B P30/P31* is specifically suited for recycling of fiber waste or regrind B improved melt flow B strongly reduced cycle times; very good mold release B efficient color protection/processing stabilization Improved quality of blends with polymer chips + additive powder B reduced separation during transport B improved additive dispersion
BRUGGOLEN M Modifiers Chain Extenders for Polyamides Bruggolen M1251** M1253** Further Modifiers Bruggolen M21 Bruggolen M30** Unique increase of molecular weight via linear chain extension (no cross-linking) B upgrade of injection to extrusion grades B increase of impact strength B increase of elongation at break Typical applications in extrusion, blow-molding, recycling and injection molding M1253** is also suited for monofilament and fiber applications Solid plasticizer for Polyamides, ABS etc. B toughening and improved melt flow Carbon Black Masterbatch in PA6 carrier B Optimized dispersion BRUGGOLEN L Light Stabilizers Light Stabilizers/Optical Brightener for Engineering Thermoplastics Bruggolen L11 Bruggolen L20 TP-L1206 Very efficient optical brightener + stabilizers package B brightens colors B better color stability due to resistance to high processing temperatures B masking of yellowish discoloration Effective protection against ageing caused by UV-light and heat B synergistic UV-stabilization packages B for pigmented (L20) and unpigmented systems (TP-L1206) Further commercial BRUGGOLEN Polymer Additives and new test products are available on request. The information given herein and our application technological advices in verbal or written form and by cooperation in trials (e.g. in Technical Information ) results to the best of our knowledge. Nevertheless, our liability for damages and disadvantages which could originate from the usage of the technical information or from an induced violation of external property rights is excluded. Our technical data sheets do not release you from own trials of your products and procedures on safety and suitability for the intended purpose. Application, use and processing of our products and produced parts by you based on our technical data sheets are beyond our control and, hence, cannot constitute a liability of our company. Apart from that our general terms and conditions apply for the sale of our products. Products are in powder form except: * granules, ** masterbatch
further PRODUCT GROUPS AP-NYLON Additives for Cast Nylon and Nyrim BrüggemannChemical is the leading supplier of raw materials and additives for nylon casting. The product portfolio comprises special catalyst and activator systems, impact modifiers, heat stabilizers and processing auxiliaries. Complementary, BrüggemannChemical provides the monomer AP-Caprolactam. Nyrim stands for specific nylon block copolymers which are processed via Reaction Injection Molding (RIM) and exhibit inherent excellent low temperature impact resistance (down to -30 C). BrüggemannChemical supports customers in co-operations based on a team of experienced experts with a sophisticated technical/r&d center. Toll Production BrüggemannChemical offers diverse advanced production plants for chemical synthesis, mixing, grinding and drying. A variety of products are produced in constant quality and according to customer requirements. Contacts BrüggemannChemical L. Brüggemann Kommanditgesellschaft Salzstrasse 131 74076 Heilbronn, Germany Phone +49 (0 ) 7131 15 75-0 Fax +49 (0 ) 7131 15 75-25-111 info@brueggemann.com BrüggemannChemical U.S., Inc. 1361 Baltimore Pike Chadds Ford, PA 19317, USA Phone +1 (610) 353 9852 Fax +1 (610) 353 9853 usa@brueggemann.com BrüggemannChemical Asia, Ltd. Room 1705, 17/F, 625 King s Road North Point, Island East, Hong Kong Phone +852-3460-2527 Fax +852-3460-2522 asia@brueggemann.com www.brueggemann.com Version 09/2013