Integrated Power Solutions Modular and cost-effective power plant design
Rolls-Royce modular concept The concept boosts productivity and operating economics Generating set Engine + generator + baseplate Generating Set Fuel Treatment Engineering & Project Management Financial Services Engine control cabinet Fuel gas module Heat exchangers and filters Standard and special tools Building Aftermarket Support Heat Recovery System Electrical System The Rolls-Royce modular concept is a pre-fabricated power plant design that combines the benefits of a high efficiency, environmentally friendly and cost-effective design power plant. Whether you need a complete power plant, an auxiliary power supply or a pumping set, anywhere in the world, we can supply the ideal product unrivalled in terms of efficiency and fuel consumption, reliability and availability. Pre-fabricated and modular, the power plant design delivers the solution electricity power markets demand; a cost-effective, flexible system with the highest levels of performance, reliability and rapid delivery. Power plants from 2MW to 200MW and beyond can be configured for power generation or CHP (Combined Heat and Power) operation. Capable of running in isolated mode, or in parallel to the grid at times when electricity prices are high, the generating plant can operate at low variable costs with minimal environmental effect. A further advantage of power plants manufactured by Rolls-Royce is the decentralisation of power production they deliver. Compared with a centralised plant that relies on grid electrical supplies, the independent plant minimises transmission and distribution losses, reduces costs and maximises power availability, particularly during grid failures. High reliability and availability are built in features with all engines from Rolls-Royce. Spares requirements are low and all maintenance can be performed on site, enabling multi-engine applications to remain operational while a single unit undergoes maintenance. Your Powerful Partner Rolls-Royce Power Systems AG with its headquarters in Friedrichshafen, Germany, is a specialist for large engines, propulsion systems and distributed energy systems. The product portfolio includes MTU brand high-speed engines and propulsion systems for ships, for heavy land, rail and defence vehicles, and for the oil and gas industry. Under the MTU Onsite Energy brand, the company markets diesel gensets for continuous, prime, peak and standby applications, in addition to cogeneration plants for the generation of combined heat and power based on gas engines. Medium speed engines of Rolls-Royce Power Systems are produced in Norway for marine and power generation applications. L Orange rounds off the portfolio with fuel injection systems for large engines. Industry-leading performance More energy and better cost-effectiveness than any other engine of this type Lower life-cycle costs and high availability B32:40L & V B35:40V AG
Industry-best for the environment and efficiency Fuel Treatment Natural gas, Bio gas, MDO, HFO, Crude oil Power applications Electrical power generation Combined Heat and Power (industrial, district heating, sludge drying applications etc) Electrical Systems Engine control cabinet Genset control cabinet with synchronisation of the generating set Grid control cabinet with synchronisation to the grid MCC (starter cabinet) SCADA system Building Pre-engineered Pre-fabricated purpose-built building for costeffectiveness The engines operate at high levels of environmental quality and typically reach close to 50 per cent efficiency, or more than 95 per cent in combined heat and power. These levels of efficiency bring considerable savings in fuel consumption compared with other systems. They also provide the advantage of multi-unit configuration, in which you can optimise the output of the plant to match specific requirements of varying loads. This enables you to operate each engine at its optimum efficiency. Increased power production can be achieved by installing a heat recovery system and a steam turbine, typically increasing power production in the range of 10 per cent with no additional fuel consumption. For intermediate peaking and base load operations, this reduces the cost of electricity and increases the economic benefits of the plant. The concept allows this option to be included in the design, or for the steam turbine to be added later. Engines are extremely robust and are ideal for operations in the most demanding industrial environments. Output deterioration with altitude, or in very hot ambient conditions, is minimal. Rolls-Royce gas engines also run on low-pressure gas, meaning they can be located virtually anywhere that requires efficient and reliable power production. Trusted to deliver excellence The capabilities of natural gas as a clean, reliable, widely available and cost-effective fuel for industrial power plants is equalled by the ability of Rolls-Royce to deliver highly efficient gas and liquid engines for operators worldwide. Besides building individual gas and liquid fuel engines, Rolls-Royce has considerable global experience in providing plants that exploit the full capability of the prime movers. Rolls-Royce experience in the reciprocating engine markets spreads across all five continents. In Europe alone we have sold more than 590 gas engines since the first engine entered service in 1991. Rolls-Royce has proven experience in completing and running turnkey projects through a combination of engineering, procurement, construction and Long-Term Service Agreements. From concept to multi-decade operational capability, Rolls-Royce expertise in engines and their power plants leads the world.
Flexible usage maximises the profit potential of your investment Engineering & Project management Design and engineering packages Dedicated site and project management Financial services Credit insurance Export credit support Aftermarket Operation & Maintenance Agreement Multi-level Long-Term Service Agreement Service Support and Supervision Agreement Spare Parts Supply Agreement The design of power plants manufactured by Rolls-Royce gives you full flexibility to expand your plant capacity by adding new engines or removing existing units as your needs evolve. This flexibility ensures you start to make a profit sooner with lower initial investment and have the ability to expand with minimal risk when business conditions allow. Each project is put into the safe, professional hands of one of our Project Managers who, supported by a multiskilled operations team, is responsible for ensuring each project runs smoothly, on time and to budget. Rolls-Royce is dedicated to ensuring your investment operates not only efficiently but also profitability for the whole of its lifespan. A key part of this commitment is our attention to aftermarket services for your benefit. We provide rapid delivery of spare parts and complete operational and maintenance management. You can select the level and extent of service to ensure it matches your precise operational needs. Rolls-Royce gives you the capability you need to operate profitably with maximum availability, reliability and environmental quality. For long-term value, power plants from Rolls-Royce minimise risk while maximising revenues. Optimum lifelong performance
Subject to change. 150044-01 Bergen Engines AS Part of the Rolls-Royce Group www.rolls-royce.com/bergen info@rrbergen.com The information in this document is the property of Bergen Engines AS and may not be copied, or communicated to a third party, or used, for any purpose other than for which it is supplied without the express written consent of Bergen Engines AS. While this information is given in good faith based on the latest information available to Bergen Engines AS, no warranty or representation is given concerning such information, which must not be taken as establishing any contractual or other commitment binding upon Bergen Engines AS or any of its subsidiary or associated companies.