() PIO TIZ/fm PIO KER/f Type of PT activity domain Period of implementation : testing/ EN 822 EN 825 EN 13, Methods A & thermal C in buildings EN 14 ceramic tiles EN 826 EN 15 length, width, thickness, squareness and flatness compression behaviour dimensional stability under laboratory dimensional stability under specified deformation under specified compressive load & temperature dea 29.01.18. 19.02.18. 26.03.18. - 23.04.18. 5 EN 12089 bending behaviour 10545-8 linear thermal expansion 14.02.18. 07.03.18. 21.03.18. - 03.05.18 7 140 80 * only for particular sequential s
() PIO CEM/h PIO OTP/h PIO BIT/f PIO BUK/a Type of PT activity domain Period of implementation : testing/ (sequential cement CRM solid waist (flying ash) solid waist based on flying ash from eluate bitumen environment noise level (indoors) EN 196-2 a. 4 EN 196-2 a. 5 EN 15309 11885 dea wet chemistry 150 chemical analyses 02.03.18. 30.03.18. 27.04.18. - 01.06.18. 6 XRF spectroscopy 150 chemical analyses Al, As, Ba, Cd, Ca, Cr, Cu, Fe, Pb, Mg, Mn, Se, Ni, K, Ag, 5 20 Na, V, Zn Al, Sb, As, Ba, Be, Bi, 16.03.18 B, Cd, Ca, Cr, Co, 20.04.18 07.05.18-11.06.18 Cu, Ga, In, Fe, Pb, Li, Mg, Mn, Mo, Ni, P, K, 3 10 Se, Si, Ag, Na, Sr, S, Sn, Ti, W, V, Zn, Zr EN 15326 density EN 1426 needle penetration 26.03.18. 30.04.18. 18.05.18. - 22.06.18. 9 EN 1427 softening point ISO 1996-1, 2 frequency analysis on third frequency band (50 Hz 10 khz) 10.04.18. 14. to 18.05.18. 14. to 18.05.18. - 02.07.18. 11 230 * only for particular sequential s
() PIO KAG/fm PIO ZIZ/a PIO CEM/fm 02/18 Type of PT activity domain Period of implementation : testing/ (sequential * only for particular sequential s stone aggregate 0 16 mm field measureme nt of sound cement EN 933-4 EN 1097-1 ISO 16283-1 ISO 16283-2 SRPS B.C8.023 shape index resistance to wear (micro-deval) airborne sound impact sound bulk density dea 24.05.18. 22.06.18. 16.07.18. - 20.08.18. 8 15.06.18. 02. to 06.07.18. 02. to 06.07.18. - 06.08.18. 5 weight of prism 30 flexural strength (after EN 196-1 2, 7 & 28 days) 120 compressive strength (after 2, 7 & 28 days) 120 standard consistency 20.07.18. 17.08.18. 28.09.18. water content - 19.11.18. 9 30 EN 196-3 determination of setting times determination of soundness 30 sieving method ( EN 196-6 t.3 and 45 µm) 30 EN 196-6 t.4 air permeability 40 110 230 230 40
() PIO PPZ/p PIO PIV/fm PIO VPS/f Type of PT activity domain Period of implementation : testing/ mineral wool wood based panels (uncoated panels) air permeability of buildings dea Blaine method EN 196-8 heat of hidratation EN 196-9 heat of hidratation 1182 non-combustibility test 15.08.18. 12.09.18. 30.09.18. - 21.10.18. 5 220 EN 311 surface soundness EN 317 swelling in thickness after immersion in water tensile strength 27.08.18. 24.09.18. 02.10.18. - 05.11.18. 5 EN 319 perpendicular to plane of board EN 321 moisture resistance 120 EN 124-5 formaldehyde content 250 number of air changes by fan 15. to 15. to 14.09.18. 9972 pressurization 19.10.18. 19.10.18. - 01.12.18. 5 200 method * only for particular sequential s
() PIO OPC/f PIO KAG/f 02/18 Type of PT activity domain Period of implementation : testing/ formatted split sample clay pavers natural stone aggregate 4 16 mm EN 1344, Annex C EN 933-1 freeze/thaw resistance particle size distribution - sieving method dea 28.09.18. 22.10.18. 03.12.18. - 14.01.19. 5 220 15.10.18. 23.11.18. 14.12.18. - 25.01.19. 15 180 * only for particular sequential s