CONVEYING PIECE GOODS SPECIAL PLANTS AND DEVICES SERVICES MINDA TANGERMÜNDE
02 MINDA TANGERMÜNDE 03 TECHNOLOGY AND TEAM SPIRIT: MINDA TANGERMÜNDE Since 1992 MINDA has manufactured innovative and customer-specific components and plants for intralogistics and special solutions in the device and mechanical engineering in Tangermünde. As an expert in the development, production and commissioning of conveyor technology and special plants we consider ourselves as an integral service provider. Thus, we provide all production steps from one source with the proven quality Made in Germany. We realize individual projects from the first draft via design and production in our factory up to the acceptance test in your factory. Consequently, we have full control over our high safety and quality standards. Of course, we are certified according to DIN EN ISO 9001 and an acknowledged welding company according to EN 1090 EXC_2 - providing highest safety and quality. We are looking forward to realizing your demands with our long-standing experience and modern technologies and to offering you the best service available for many years beyond the project handling. COMPANY HISTORY Page 04 05 PROJECT AND DESIGN ENGINEERING Page 06 07 August-Wilhelm Henke Director CONTROL TECHNOLOGY Page 08 09 PRODUCTION AND INSTALLATION Page 10 11 OUR PRODUCTS Page 12 13 Robert Falch Managing Director OUR SERVICES Page 14 APPRENTICESHIPS Page 15
04 COMPANY HISTORY 05 Our production site in Tangermünde has continued the tradition of the metal construction trade of a central workshop in the former fiberboard and particleboard plant. Founded in 1990 as Tangermünder Maschinen- und Anlagenbau we have been an integral part of the MINDA Group since 1992. At present, MINDA Tangermünde exclusively employs highly qualified experts with a training rate of 11 %. We are permanently investing into machines and production facilities in order to guarantee best conditions for an optimal production on a long-term basis. INNOVATION RIGHT FROM THE BEGINNING 2004 Delivery of the first complete intralogistic solution 2016 Extension of the production capacity to a surface of 9000 m² 1994 Extension of production facilities and investment into new metal-cutting machines 2006 New construction of a technical office building and innovation center 8 m high chute pipe of a rubber recyclate plant and a 400 t baling press above.
06 PROJECT AND DESIGN ENGINEERING 07 BEST SOLUTIONS FROM A COMPETENT SUPPLIER Factory planning is realized in close cooperation with the customers in order to ensure that the optimal solution for the customer s requirements is developed. Our highly qualified team of engineers, technicians, experts for the sectors project and design engineering as well as electrical technology and software development implement these projects. Sound knowledge which is continuously extended and even supplemented by research and development work is the basis for successful operations. The core competences are especially in the mechanic construction in 3D. Apart from own customer projects, MINDA Tangermünde also realizes concepts for other companies of the MINDA Group. Project engineering Mechanic construction of a plant in 3D Manufacture and installation Tailor-made according to special customers requirements
08 CONTROL TECHNOLOGY 09 INTELLIGENT AUTOMATION Benefit from our experiences Individual switch cabinet technology for industrial applications Our intelligent automation ensures an increased speed of many of your production steps. MINDA will find a suitable solution for your demands. A modern, efficient control technology is the basis for all production steps of an automatic plant. We are mainly using hardware of the type S7, which will soon be adopted to the so-called TIA-portal (totally integrated automation). Thus, a best possible central supervision of control units, drives and motion controls is provided. Our qualified electrical engineers, who permanently extend their field of application by regular further education, are responsible for the programming tasks. The competent creation of wiring diagrams as well as the planning of switch cabinet configuration is carried out by our system planners with special CAD software. All machines are tested with the corresponding controls here at MINDA prior to their delivery in order to ensure a fast and perfect commissioning at the customer. Inseparably Interlinking to complex, fully-automatic systems
10 PRODUCTION AND INSTALLATION 11 EVERYTHING FROM ONE SOURCE, RIGHT FROM THE BEGINNING After the engineering, experienced MINDA planning engineers dispose the individual assembly groups depending on in-house production, stock or purchased material. For the mechanical production, modern machines for turning and milling in different sizes are available. In the steel construction, the racks and assembly groups are connected by means of modern gas-shielding arc welding devices, then they are adjusted and welded. Everything is joined in the assembly department up to the test run with the control cabinets. On demand, we are pleased to arrange a factory acceptance test together with the customer. After dismantling and despatch, the complete equipment is installed and commissioned at site by our qualified staff. For a successful and systematic control a detailed training will follow. Over the entire life time of the plant, we provide service and spare parts. Thus, we come full circle. Our qualified experts ensure best quality in development, construction and commissioning while implementing all customers requirements. Cutting operations Turning, milling, drilling We manufacture complex individual and serial parts for you Welding and assembling Step by step to a finished machine High-capacity dispenser for the corrugated industry; last installation work prior to test run and delivery
12 OUR PRODUCTS 13 Railway technology CONVEYOR TECHNOLOGY AND INDUSTRIAL HANDLING, SPECIAL PLANTS AND DEVICES Workshop equipment up to complete maintenance plants Within the MINDA Group, MINDA Tangermünde is the center for cutting operations due to its modern machinery. All steps of the turning and milling machining are executed here so that even complex customers requirements can be easily realized. Moreover, MINDA develops and produces complete plants for the in-house material flow of goods, which are controlled by a specially developed software and integrated into customer-specific technological solutions. Another focus is the device construction - among others, MINDA Tangermünde offers universal clamping devices for laser welding systems incl. PLC control. Workshop equipment for this sector includes, for example, lifting tables for lateral working pits, devices for wheel set processing and storage as well as special devices and transport units. MINDA also realizes special plants according to customers requirements with different drive and control concepts, whereby it is focused on the development of customized solutions in all sectors of the mechanical engineering. Devices From simple installations up to complex welding devices Conveyor technology On the basis of roller conveyors, chain conveyors and plastic chain conveyors Laterally adjustable carriage with lifting device in the copper rollling mill.
14 OUR SERVICE ALWAYS CLOSE TO YOU TRAINING AS KEY FOR QUALIFIED YOUNG TALENTS 15 OUR SERVICE THE FUTURE STARTS TODAY Our main target is your satisfaction apart from our competence in the sectors mechanics, control technology and pneumatics we provide further services beyond plant engineering. On request, we are pleased to conclude service contracts. Our daily work includes the time- and cost-saving support of the control technology by means of remote maintenance via VPN-access. You require availability also after office hours? This availability is guaranteed by our service hotline. Our performances: Mechanical repair and maintenance of plants Modifications of MINDA plants at site and in special cases even of equipment from other manufacturers. Relocation of production sites Control system maintenance incl. possibility of access via VPN Modification of control systems from SIEMENS S5 to S7 Visualization from Basis to WinCC With a training rate of 11 percent we are already now well prepared for a continuous growth and a qualified further development of our company. This commitment for our young talents regarding the education of specialized staff and engineers has already been awarded several times. For many years, we have educated young engineering students in dual course studies, that means the practical sequences are accompanied with tasks in the production and engineering departments. Many of our graduates have already passed a complete specialized apprenticeship of 3 ½ years in our company. Apprenticeships Technical product designer, mechanics Technical system planner, electrical engineering Industrial mechanic Construction mechanic Mechatronics engineer Electronic technician, industrial engineering Cutting mechanic, turning and millling Industrial clerk Dual course of studies Electrical engineering Mechanical engineering
MINDA TANGERMÜNDE A STRONG TEAM THE MINDA GROUP MINDA Industrieanlagen GmbH Arneburger Str. 37 n D-39590 Tangermünde Fon: +49 39322 996-0 Fax: +49 39322 996-66 tangermuende@minda.de, www.minda.de/tangermuende MINDA Industrieanlagen GmbH Hans-Böckler-Str. 24 D-32423 Minden Fon: +49 571 3997-0 Fax: +49 571 3997-105 info@minda.de Hohmeier Anlagenbau GmbH Enzer Straße 121 D-31655 Stadthagen Fon: +49 5721 9789-0 Fax: +49 5721 9789-30 info@hohmeier-anlagenbau.de Universal Corrugated B.V. Königsweg 8 NL-7602 CX Almelo Fon: +31 546 831111 Fax: +31 546 816700 info@universal-corrugated.nl