FILTRATION & SPECIALITY PAPER FILTRATION AND SPECIALITY PAPER APPLICATIONS PRODUCT GUIDE (EUROPE) www.lubrizol.com/coatings
LUBRIZOL INNOVATIVE TECHNOLOGIES AND CUSTOMISED SOLUTIONS. COMPLIANCE AND SAFETY FOCUSED Lubrizol s extensive portfolio of polymers and custom-formulated solutions for filtration and speciality paper applications include an excellent choice of formaldehyde-free, APE-free and NMP-free* options within our Hycar, Vycar and Sancure product lines. CUSTOMER-DRIVEN R&D AND CUSTOM TAILORED SOLUTIONS Lubrizol research scientists use statistical modelling and have access to virtually thousands of monomer combinations, providing them with the right tools for continuous innovation. If the right solution for a given market application cannot be drawn from Lubrizol s existing choice of product offerings, our R&D team stands ready to either modify existing technology or forge a new product advancement to better meet the customer s needs. * Our formaldehyde-free technologies mean that formaldehyde is not known to be present in any of the raw materials used, nor added as a preservative, nor generated during the curing process. Ultimately, this means the formaldehyde level is below the detectable limit of 2 ppm. All products listed are NMP-free, which means that no N-Methyl Pyrrolidone is intentionally used in the formulation, but trace amounts may be detectable from common equipment cross contamination sources at a level less than 0.1% and typically less than 0.05%. The listed products are not expected to contain any ethoxylated alkyl phenols (APE) that are regulated due to health, safety, or environmental concerns, at levels above the required reporting limits. Understand that Lubrizol does not regularly test its products for such materials. 1
PRODUCT SELECTION BY MARKET PRODUCT NAME Tg o C ABRASIVES AIR FILTRATION BOOKCOVER DÉCOR LIQUID FILTRATION GASKETING MAT/FACER MEDICAL PAPER COATINGS TAPE SATURANTS WALLPAPER SPECIALITY Hystretch 7318-60 Hystretch V-29-29 Hycar TN-615-25 Carbobond 26387-23 Hycar 26477-20 Hycar 26083-15 Hycar 26552-15 Hycar 26856-12 Hycar 2671-11 Hycar 26120-11 Hycar 26345-6 Hycar 2679-3 Hycar 26796 0 Hycar FF26916 2 Carbobond 26373 5 Hycar 26948 7 Vycar 460X46 7 Hycar 26084 8 Hycar 26349 15 Hycar 26091 20 Hycar 26288 20 Hycar 26548 20 Hycar 26138 25 Hycar 26869S 25 Hycar 26523 27 Hycar FF-26903 29 Hycar FF-26921 29 Hycar 26348 30 Hycar 26907 31 Hycar 26939 31 Hycar 26450 32 Hycar 26172 33 Hycar 26391 36 Hycar NH3069 40 Hycar 26599 42 Hycar TN-610 53 Hycar 26968 59 Hycar TN-621 56 Vycar 352 69 Vycar 460X104 70 Carbocure TSR-72 72 Hycar 26951 Urethane Polymers 100% Modulus Permax 232 160 Permax 202 310 Sancure 20025F 300 Sancure 861 650 Sancure 2715 1100 Hyperdispersants Solsperse 20000 Solsperse 27000 Solsperse 40000 Solsperse 46000 2
SPECIALITY PAPER MARKET SEGMENT APPLICATION METHOD TYPICAL PHYSICAL PROPERTIES TYPICAL PERFORMANCE PROPERTIES ENVIRONMENTAL & REGULATORY PRODUCT NAME SATURANT BARRIER DURABILITY EXTENDER PRINTABLE RELEASE BEATER ADDITION Tg o C SOLIDS ph VISCOSITY HEAT REACTIVE CARBOXYLATED TENSILE SHEAR STABLE SOLVENT RESISTANCE WATER RESISTANCE TEAR RESISTANCE BLOCK RESISTANCE INTERNAL BOND MIT FOLD MULLEN BURST HEAT STABLE GLOSS SCRUBBABLE FDA CLEARANCES APE-FREE 1 FORMALDEHYDE-FREE 2 Hystretch 7318-60 50 7 40 Yes Yes Yes No Hystretch V-29-29 49 8 100 Yes Yes No No Hycar TN-615-26 50 5 50 Yes Yes Yes No Carbobond 26387-23 60 5 100 Yes Yes Yes No Hycar 26477-20 48 5.7 125 Yes Yes Yes No Hycar 26083-15 52.5 6 55 Yes Yes Yes No Hycar 26552-15 47 4 50 Yes Yes Yes Yes Hycar 26856-12 50 4.5 100 Yes Yes Yes Yes Hycar 2671-11 53 5 170 Yes Yes Yes No Hycar 26120-11 50 3.0 60 Yes No Yes No Hycar 26345-6 50 3.0 20 Yes Yes Yes No Hycar 2679-3 49 3.7 100 Yes No Yes No Hycar 26796 0 48 5 700 Yes Yes Yes No Hycar FF-26916 2 50 8.5 65 Yes Yes Yes Yes Carbobond 26373 5 58 4 50 Yes Yes Yes No Hycar 26948 7 52 4 100 Yes Yes Yes Yes Vycar 460X46 7 49 7 35 Yes Yes Yes No Hycar 26084 8 50 6.1 110 Yes Yes Yes No Hycar 26349 15 49 4.6 60 Yes No Yes No Hycar 26091 20 51 6.8 35 Yes Yes Yes No Hycar 26288 20 49 4 200 Yes Yes Yes No Hycar 26548 20 45 3 20 Yes Yes Yes Yes Hycar 26138 25 49 5.5 60 Yes No Yes No Hycar 26869S 25 48 6 200 Yes No Yes No Hycar 26523 27 42 5.2 10 No Yes Yes Yes Hycar FF-26903 29 46 4 40 Yes Yes Yes Yes Hycar FF-26921 29 42.5 8 65 Yes Yes Yes Yes Hycar 26348 30 48.5 6 50 Yes No Yes No Hycar 26907 31 48 6 100 Yes Yes Yes Yes Hycar 26939 31 48 9 200 Yes Yes Yes Yes Hycar 26450 32 46 4 25 Yes Yes Yes No Hycar 26172 33 50 2.3 100 Yes Yes Yes No Hycar 26391 36 49 3.6 125 Yes Yes Yes No Hycar NH3069 40 36 5 700 Yes No Yes No Hycar 26599 42 45 3 20 Yes Yes Yes Yes Hycar TN-610 53 48 3.5 130 Yes Yes Yes Yes Hycar 26315 55 49.5 3 50 Yes Yes Yes No Hycar 26968 59 47 3 100 Yes Yes Yes No Vycar 352 69 57 10.3 20 No No Yes Yes Vycar 460X104 70 55 9 20 Yes Yes Yes Yes Carbocure TSR-72 72 34 4.6 50 Yes Yes Yes No Hycar 26951 44 8.6 100 Yes Yes Yes Yes KEY: = Good = Very Good 1 APE not intentionally used, but trace amounts may be detectable at low levels. 2 Formaldehyde is below the detectable limit of 2 ppm. 3
FURTHER DESCRIPTION/OTHER INFORMATION Controlled tack; ultra-soft, dust holding performance in filtration; solid non-skid coatings Flexible binder for conformable products; elastic recovery Paper saturant for tape, premask and abrasive where tear, delamination and fold are important High solids heat reactive saturant for tape and wallcoverings; very good elongation and fold endurance Flexible saturant with balance of strength and toughness properties; excellent mechanical stability; hydrophobic polymer White-water colour; low temp flex; excellent resistance to discoloration; saturant for tape and pre-mask Formaldehyde-free 2, sterilisable binder; highly dispersible until cured Good chemical and mechanical stability; solvent and dry clean resistance; soft hand; excellent heat and light stability General purpose saturant with balance of physical properties; solvent resistance; mechanical and heat stability; sterilisable binder; excellent light fastness; broad FDA & EU Compliance Highly redispersible; excellent stability in machine processing; balance of physical properties and heat stability; general purpose, sterilisable binder Excellent cold flex, solvent resistance and heat stability; broad FDA & EU Compliance Flexible general purpose saturant; balance of strength and toughness properties; excellent abrasion & solvent resistance; block resistance; broad FDA & EU Compliance Saturant for bookcover that has outstanding fold endurance properties; self-thickening Formaldehyde-free 2 with excellent wet & dry tensile; internal bond and very scrub resistant Heat sealable; tough; high solids; very broad FDA compliance; hydrophobic; high solids Formaldehyde-free 2 ; hydrophobic - Low Cobb values; outstanding wet/dry tensile; excellent wet/dry burst properties; broad FDA & EU Compliance Flame retardant tough polymer with good abrasion and chemical resistance Heat seal adhesive with excellent solvent and plasticiser resistance; potable water & milk filter; broad FDA compliance Excellent abrasion, solvent & plasticiser resistance; coatings provide toughness and block resistance; can be used as-is or with filler addition; Broad FDA & EU Compliance Broad FDA compliance; oil and grease resistance Heat sealable; broad FDA & EU Compliance Paper and filtration saturation polymer; tea, coffee and milk filters; broad FDA & EU Compliance Tape release coatings; excellent abrasion, solvent & water resistance; coatings provide toughness and block resistance; can be used as-is or with filler addition; printable; excellent re-adhesion properties Durable hydrophobic binder with excellent abrasion and solvent resistance Tape release coatings; hydrophilic; excellent oil & solvent resistance Formaldehyde-free 2 with excellent dry & hot dry tensile Formaldehyde-free 2 ; excellent for microglass and synthetic media; fast curing; hot tensile strength Tape release coatings; hydrophobic; excellent solvent resistance; excellent release and re-adhesion properties Firm, hydrophobic; excellent wet properties; low extractables; methanol stable Formaldehyde-free 2 ; good heat and light stability; excellent roll stability Balance physicals & pleatability; broad FDA & EU Compliance; high crosslink density; oil resistant Stable to NHFR additives; heat reactive Pleatable; stiff; highly water resistant; very good colour; filtration paper and nonwoven coatings Non-halogen Flame Retardant polymer; stiff; can pass FR Norms on Cellulosics Firm, good wet strength hydrophilic polymer; suitable for food grade filtrations and packaging applications; broad FDA & EU Compliance Formaldehyde-free 2 polymer; paper coating and saturant, wall paper, card stock, filtration-methanol stable Heat sealable; excellent strength & stiffness; broad FDA & EU Compliance; methanol stable Excellent hydrophobicity; good wet properties; stiff; good solvent resistance Tape release coatings; excellent chemical resistance; flame retarding; formaldehyde-free 2 ; printable; excellent re-adhesion properties Flame retardant; crosslinkable; excellent colour and mechanical stability; salt stable; paper and nonwoven saturant Stiff, high crosslink density polymer with excellent oil and solvent resistance; high temperature dimensional stability; can replace melamine formaldehyde resins as an additive Formaldehyde-free 2 firm and flexible polymer; low temperature self-crosslinking (<100 C) excellent adhesion to a range of substrates/surfaces; good water and solvent resistance 4
SPECIALITY PAPER ADDITIVES PRODUCT NAME % ACTIVE APPLICATIONS PERFORMANCE Carbopol EP-1 30 Alkali-swellable emulsion thickener for water-based coatings. High efficiency; short rheology; develops viscosity upon addition of neutralising base. Carbopol EP-2 18 Alkali-swellable emulsion thickener for water-based coatings. High efficiency; imparts longer flow than Carbopol EP-1 to control penetration; develops viscosity upon addition of neutralising base. Solsperse 20000 100 Flexographic inks; water-based pigment dispersions & inks; plasticiser dispersions. Increased pigment wetting; increased tinctorial properties; improved performance of poor wetting resins; produces highly pigmented concentrates. Solsperse 27000 100 Water-based dispersant for pigment dispersions; good for synthetic fibres. Increased pigment concentration; improved pigment wetting; better tinctorial properties; excellent storage stability. Solsperse 40000 85 Solsperse 46000 40 Water-based inorganic pigment dispersant. Water-based dispersant for synthetic fibres (polyester and nylon). Low foaming; increase pigment concentration; improved gloss/lower haze; no detrimental effect on water resistance; improvements in flocculation resistance. Stable resin-free dispersions; compatibility with a wide range of binders including: acrylic; epoxy; polyurethane; alkyd; minimal effect on water resistance; excellent viscosity stability. POLYURETHANE DISPERSIONS TYPICAL PHYSICAL PROPERTIES PRODUCT NAME TYPE SOLIDS (%) ph VISCOCITY (CP) VOC (g/l) 100% MODULUS (psi) TENSILE STRENGTH (psi) ELONGATION AT BREAK (%) DESCRIPTION/SUGGESTED USES Permax 202 Polyether 40 5 500 <10 310 5000 750 Permax 232 Polyether 35 5 300 26 160 1300 650 Sancure 20025F Polyester 48 8 500 27 300 4100 1000 Sancure 861 Polyether 40 8 650 30 650 2600 580 Sancure 2715 Polyether 38 9 750 31 1100 3300 425 Medium soft nonionic polyether; good MVTR; NMP-free 1 Soft; flexible elastic polyether with good hydrolytic stability; high MVTR, nonionic low VOC 2 ; NMP-free 1 Low VOC 2 ; elastic polymer; good heat stability; NMP-free 1 Soft; durable adhesives; low VOC 2 ; for use in nonwoven and other flexible applications; NMP-free 1 Firm; hard; low VOC 2 ; tough film with fast property development; medium hard aliphatic polyether urethane; NMP-free 1 1 NMP not intentionally used in the formulation and is <0.1% and typically < 0.05%. 2 Defined by Lubrizol as <140 g/l as measured by EPA Method 24. 5
6
NORTH AMERICA Lubrizol Advanced Materials, Inc. 9911 Brecksville Road Brecksville, OH 44141 USA +1.800.380.5397 EUROPE Lubrizol Limited PO Box 42, Hexagon Tower Blackley, Manchester M9 8ZS United Kingdom +44 161 721 6800 ASIA-PACIFIC Lubrizol Specialty Chemicals (Shanghai) Co., Ltd 10/F, Park Center International No. 1088 Fang Dian Road Shanghai 201204, PR China +8621-3866-0366 SOUTH AMERICA Lubrizol do Brasil Aditivos Ltda Avenida Nove de Julho, 3653 Jardim Paulista Sao Paulo SP 01407-000 +55.11.4097.0250 WHAT WE ADD MAKES THE DIFFERENCE. At Lubrizol, we innovate coatings solutions that help our customers balance the aesthetics, durability and functionality needs of their products for a wide array of surfaces and substrates. Our strength is in collaborating with customers to solve their toughest challenges such as making coatings safer, enhancing production efficiency and reducing environmental impact without compromising performance. To learn more, contact your Lubrizol representative or visit www.lubrizol.com/coatings. The information contained herein is believed to be reliable, but no representations, guarantees or warranties of any kind are made as to its accuracy, suitability for particular applications or the results to be obtained. The information is based on laboratory work with small-scale equipment and does not necessarily indicate end product performance. Because of variations in methods, conditions and equipment used commercially in processing these materials, no warranties or guarantees are made as to the suitability of the products for the applications disclosed. Full-scale testing and end product performance are the responsibility of the user. Lubrizol Advanced Materials, Inc. shall not be liable for and the customer assumes all risk and liability of any use or handling of any material beyond Lubrizol Advanced Materials, Inc. s direct control. The SELLER MAKES NO WARRANTIES, EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. Nothing contained herein is to be considered as permission, recommendation nor as an inducement to practice any patented invention without permission of the patent owner. Visit us at: www.lubrizol.com/coatings The Lubrizol Corporation 2016, All Rights Reserved. 15-0172-2