NextGen Epoxy WB Epoxy System (EPI-REZ Resin 7520-WD-52 and Research Curing Agent RSC-4431)

Similar documents
ADVANCED PROTECTIVE COATING SYSTEM Breakthrough Protective Top Coat and High Performance Epoxy Primer

OUDRACure WB 8002 Waterborne Epoxy Curing Agent

Coating Types. Coating Systems. Coating Basics. Why coatings are used Component of coatings Methods of protection Service environment

AROFLINT 810 Product Code: Acid Functional Polyester for Two-Package Polyester Epoxy Systems

10P20-14 High Solids Low IR Primer

Ultra-Low VOC Waterborne Alkyd Coatings for Metal Protection

Nathan Kofira Technical Development Manager

Corlar 2.1 PR-P High Solids Productive Epoxy Primer For Use With FG-040, FG-041 or FG-042 Activators

PRODUCT GUIDE: ZINC-RICH COATINGS. Version:

Epoxy Moisture Vapor Reduction / Mitigation for Flooring. April 2015

Corlar 2.8 HG High Solids Epoxy

Corlar 2.1 PR-P High Solids Productive Epoxy Primer

58 Series Polyurethane topcoat

High Performance, Cost Effective Waterborne Epoxy Concrete Protection

Epoxy Curing Agents and Modifiers

SECTION 1045 PAINT FOR STRUCTURAL STEEL

Refer to Substrates & Surface Preparation.

UCECOAT Waterborne UV Resins for Field Applied Wood Floor Finishes

Reactive Diluents for Achieving High Solids Acrylic Polyurethane Coatings

NORTH AMERICA EPOXY CURING AGENTS EPOXY

DP4101 / DP4104 / DP4107 HS PRIMER

Waterborne Epoxy Curatives. High performance. Low emissions. Cost-effective.

A New Self-Crosslinking Acrylic Latex Garage Floor and Masonry Applicatio

Zinc-free and aqueous

Viscosity at 25 C [ mpa s ] Colour Gardner. Solids content [ % ]

Carboguard 890 PRODUCT DATA SHEET SELECTION & SPECIFICATION DATA. Generic Type. Cycloaliphatic Amine Epoxy

AR555 Waterborne Epoxy Resin

Valspar InspireME Coil and Extrusion Product Guide Specification Section Shop-Applied Coatings for Metal

Aliphatic Acrylic-Polyester Polyurethane

Laboratory Testing of Three Above Ground Paint Systems for Canadian Applications

The Best of Both Worlds!

Maximum Rust Protection!

EPOTUF. Epoxy Resins & Curing Agents

NCI for Industrial Applications. Restore Highly Oxidized & Colors. Extend Freshly Painted or Existing Paint by 10+ Years

Imron 1.8 FT-C Flat Waterborne Polyurethane Clearcoat

VE 9300 SERIES NOVOLAC VINYL ESTER

GRIP-GARD PLUS BRUSH / ROLL ADDITIVE

Eclipse ECL-G-2 Clear High Solids Polyurethane Topcoat

Property Test/Standard Description. semi gloss (35-70) Flash point ISO 3679 Method 1

10P2-3 Anti-static Conductive Flat Black Epoxy Coating

Aerocron 2100 Anionic Epoxy Primer

Vapor-Clear. The high-performance, low-cost, eco-friendly, aesthetically-pleasing alternative to high-build epoxy floors and boring

StreetBondSR Specification Help

two component high build amine adduct cured phenolic epoxy primer

HVAC Antimicrobial Protected Coatings

4002A21M Aluminum Lipskin Coating

POWDER COATING CATALOG

Corrosion Protection for Fisher Valves

Property Test/Standard Description. US EPA method 24 (tested) (CARB(SCM)2007, SCAQMD rule 1113, Hong Kong)

NACORR Rust & Corrosion Inhibitors

One-coat application 5 LV650 Clear 2 LV650 Hardener 1 LV650 Reducer Anti-Graffiti (#484165)

SIGMACAP MASTIC GF. September surface tolerant coating for lower grade of steel preparation

64C1-2-A High Temperature Resistant Insulative Coating

Multifunctional Protective Coatings for Weapon Systems Chemical Agent Resistant Coatings

Corlar LV PR 178 Series Epoxy Primer

1.4 kg/l (11.4 lb/us gal) Maximum 295 g/kg (Directive 1999/13/EC, SED) Maximum 420 g/l (3.5 lb/gal) 50 to 63 μm (2.0 to 2.

Double your sustainability. Water-based resins for industrial metal coatings

Understanding the Basics of Electrocoat. Kelly Moore Development Chemist

Bringing coatings to life. Performance-engineered precipitated silicas

1.1 This Section includes surface preparation and the application of base coats, intermediate and topcoats.

RHOPLEX WL-100 Emulsion Copolymer For High-Gloss Plastic Coatings With Excellent Adhesion

Approved. Property Test/Standard Description. matt (0-35) Flash point ISO 3679 Method F (29 C) calculated VOC-US/Hong Kong

Waterpoxy waterbased epoxy system

HEALTHCARE. High Performance Flooring Systems for Healthcare Services

Priming and Painting Slip Critical Steel Connections. Troy Fraebel Corrosion Specification Specialist

Normadur 65 HS. Technical Data PROPERTIES AND RECOMMENDED USAGE TECHNICAL DATA

Basecoat WB Technical Data Sheet 09 / 05 / 2016 L UK & Ireland Basecoats

Property Test/Standard Description. gloss (70-85) Flash point ISO 3679 Method C VOC-EU EU VOC Directive 2004/42/CE (theoretical) 22 g/l

Tested in accordance with ISO , high expected durability in corrosivity category C5-I. Property Test/Standard Description

Environmentally Friendly Anti-Corrosion Primers for Hot-Dip Galvanized (HDG) Steel

Electrically Conductive Compounds Selector Guide. Chomerics. Coatings, Adhesives, Sealants, Gap Fillers, and Greases ENGINEERING YOUR SUCCESS.

Frank D. Rea Director of Coatings Services / Chief Chemist

Property Test/Standard Description. gloss (70-85) Flash point ISO 3679 Method C VOC-EU EU VOC Directive 2004/42/CE (theoretical) 14 g/l

1.4 kg/l (11.4 lb/us gal) Maximum 272 g/kg (Directive 1999/13/EC, SED) Maximum 420 g/l (3.5 lb/gal) To 650 C (1200 F) To 538 C (1000 F)

5 STAR XTREME AUTOBODY PRODUCTS TECHNICAL DATA INFORMATION DATED: FEBRUARY 2017 PRODUCT NUMBER DESCRIPTION #5180 ORIGINAL KLEARKOTE 2.

3 Automotive Structural Adhesives Two-Part Induction-Cure Epoxy Adhesive 5045

PRODUCT DATA SHEETS CUSTOM COATINGS FORMULATED TO MATCH YOUR NEEDS USCOATINGS.COM // St. Louis, Missouri

Approved. Property Test/Standard Description. gloss (70-85) Flash point ISO 3679 Method C VOC-US/Hong Kong. US EPA method 24 (tested)

Instruction Guide APPLICATION OF CIM TO CONCRETE

3 Scotch-Weld TM. Epoxy Adhesive 2158 B/A. Technical Data December, 2009

Mix ratio (by volume): (base component) (activator component) (thinner component)

Pre-qualification testing in accordance with NORSOK M-501, Rev. 5, System 1, suitable for exterior exposure in offshore environment, below 120 C.

Specialty Epoxy building blocks for demanding coating, adhesive applications.

Technical Data Sheet S Topcoats LV 351 TOPCOAT MM/RM FOR PROFESSIONAL USE ONLY

New Basonat Polyisocyanate for Faster Handling. Dr. A. Steinbrecher, BASF SE, Ludwigshafen

Formulating High-Performance Waterborne Epoxy Coatings

ERC5 Erosion Resisting Polyurethane Coating

Table 2: Salt fog exposure testing Epoxy Salt fog exposure

Section COATING RESTORATION

A-4300 Clear Silicone Aliphatic Polyurea Technical Data Sheet

Sikadur -330 is a two part, thixotropic epoxy based impregnating resin / adhesive.

Property Test/Standard Description

Installation Instructions

Number: 075K0013. Machined surfaces of incoming components must be masked before coating, unless otherwise directed by Engineering.

Caprolactone chemistry

Epoxy Curing Agents and Modifiers

Developments in Waterborne Thermal Insulation Coatings By Sudhir Achar and Leo J. Procopio, The Dow Chemical Company

Final Report on Alternative Chromate-Free Wash Primers

4970 PRIME COAT FZ Two components zinc phosphate epoxy product

Transcription:

NextGen Epoxy WB Epoxy System (EPI-REZ Resin 7520-WD-52 and Research Curing Agent RSC-4431) 1

Waterborne Coatings Sustainability & Product Innovation We take an integrated business approach to sustainability with ultimate goal of creating long-term stakeholder value through environmental and product stewardship, risk management, safety and compliance. Our sustainability initiative can be grouped into three broad categories Product innovation Operational excellence Good corporate citizenship Waterborne High Solids Hexion believes and pursues the waterborne technology platforms for coating systems to contribute environment, health and safety 2

Conventional Solvent-borne Epoxy Coatings Solid Epoxy Supplied in solution EPOXY COATINGS (2K) EPOXY RESIN CURING AGENT Highly viscous polyamide Supplied in solution Epon Resin 1001-X-75-type and EPIKURE Curing Agent 3115-X-70 Limitations High VOC > 450 g/l Immiscibility / Long induction time Slow Dry Short recoat window Strong odor Needs induction due to large differences in solubility parameters 3

Waterborne SER Epoxy Dispersion Value Engineered EPI-REZ 7520-WD-52 EPI-REZ 7520-WD- 52 Research Curing Agent RSC-4431 NextGen Epoxy WB System Cost Efficient and Low VOC SER Dispersion High Performance Shelf and Shear Stable Property ER7520-WD-52 A cost effective, low-voc, HAPSfree and high performance WB SER Dispersion performing similar to SB epoxy coating system Solids (wt.%) 52 Viscosity (cp) <6000 EEW 475-550 Solvent (%) 5% 4

Waterborne SER Epoxy Dispersion Value Engineered EPI-REZ 7520-WD-52 Target End Markets: ACE (Agricultural and Construction Equipment Metal Auto Parts and Accessories Industrial Maintenance Railway Coatings Concrete Floors Walls Ceilings 5

Waterborne SER Epoxy Dispersion Value Engineered EPI-REZ 7520-WD-52 Excellent Corrosion Resistance Fast Dry EPI-REZ Resin 7520-WD-52 Economical Low VOC ( <100 g/l): metal (<50 g/l) concrete Ease of formulation & application Freeze/thaw stable Shelf stable 6

Research Curing Agent RSC-4431: Water Reducible Curing Agent Cost Effective & High Performance EPI-REZ 7520-WD- 52 Research Curing Agent RSC-4431 NextGen Epoxy WB System Water reducible curing Agent Cost Effective Low VOC WB Coating for metal and concrete coating Properties RSC-4431 Competitive Solids 75 70 AHEW 120 200 Color 2-3 11-12 Viscosity 10,700 30,000 7

Research Curing Agent RSC-4431: Water Reducible Curing Agent High performance WB curing agent, for use with SER resin dispersions, for metal and concrete coatings Cost Effective Easier conversion to WB <50 g/l VOC Environmental Benefits Compliance with changing global regulations Low AHEW (Dosage) Low curing agent demand = Lower cost Improved corrosion performance Lower Color Can be used as primer and topcoat Formulation Low viscosity / water-reducible Shelf and Shear Stable 8

NextGen Epoxy WB System High Performance WB Metal Primer Property* ASTM Rating Dry film thickness D-1186 3-4 mil Through dry D-5895B 7.5 h Pencil hardness D-1186 H Adhesion D-3359 5A/5B Salt Spray Resistance B-117 1000 h Blister, field D-714 No blisters Scribe creep D-1654 <1 mm Adhesion D-3359 5A NextGen Epoxy Waterborne System Cost Effective Coating System Superior Performance Low VOC Metal: ( <100 g/l) Concrete (<50 g/l) Ease of Application - Shelf Stable -Shear Stable RSC-ER7520/4431 ER7520/EK6870 *14-day cure at 77 o F, 55% RH 9

High Gloss Concrete Formulation RSC-4431 + EPI-REZ 7520-WD-52 Properties Values VOC <50 Dry film thickness 3-4 Dry times (h) Set to Touch, Stage II 1 Cotton Free, Stage III 9 Through, Stage IV 18 Pencil hardness, 7 days F Adhesion 5A/5B Direct impact 116 Reverse impact 88 Flexibility 32 Dollies pull-off >300 MEK resistance >200 Gloss & viscosity pot-life** >5 *Dollies pull-off and MEK resistance done on concrete **24-hour gloss was >95 at 60 o for more than 5 hours Concrete Laneta Ultra Low VOC (<50 g/l) No Induction time High Gloss & Long potlife (5-6h) Fast dry Excellent adhesion & Flexibility 10

NextGen Epoxy Waterborne System Cost-Effective Coating System NextGen Epoxy Waterborne System Performance - Adhesion - Corrosion - Blister -Freeze/Thaw Stability Low VOC Metal: ( <100 g/l) Concrete (<50 g/l) Ease of Application - Pigment wetting - Shelf Stable -Shear Stable Waterborne Coating System with improved cost and performance balance! 11