VACUUM FILMS RANGE Name Description Max. use T C SK2VF120-1 SK2VF125-1 SK2VF180-1 SK2VF180-2 SK2VF205-1 SK2VF205-2 SK2VF205-3 SK2VF220-1 Folding shape dimensional chart Multilayer vacuum film for manufacturing of wide and complex structures Thermoplastic elastomer film for debulking processes Standard nylon vacuum bagging film Nylon vacuum film for manufacturing of wide structures in the oven Nylon vacuum film for autoclave and oven applications Embossed nylon film for debulking processes Extra wide nylon vacuum bagging film Heat-resistant nylon film for autoclave and oven applications 120 C Elongation on break 460%/ MD/ 520% TD Color Green 125 C 550% Natural 180 C 380% Clear 180 C 365% Light blue 205 C 400% Green 205 C 400% Transparent 205 C 400% Transparent 220 C 380% Blue SK2VF400-1 Ultra high temperature bagging polyimide film 400 C 50% Amber Page 1 of 13
SK2VF120-1 Multilayer vacuum bagging film SK2VF120-1 is a tough, puncture resistant co-extrusion of polyethylene and nylon based resins vacuum film, which is designed for use in the production of polyester / vinylester resin infused components for the wind energy, marine and general composite industries. The product can be used in the production of epoxy resins prior to testing chemical resistance with specific resin. It is particularly interesting due to its limited sensitivity to low humidity levels which are often problematic to predominantly nylon based films as the lack of moisture can reduce flexibility. This ensures consistent yearlong performance in all workshop environments. Polyethylene / Nylon Color: Green Tensile strength at break MD N/mm 2 : 39, 3 ± 10% ASTM D882 Tensile strength at break TD N/mm 2 : 37, 5 ± 10% ASTM D882 Elongation at break MD: 460% ± 10% ASTM D882 Elongation at break TD: 520% ± 10% ASTM D882 Tear strength MD: 1,3 N ISO1683-1 Tear strength TD: 1,5 N ISO1683-1 Maximum use temperature: 120 C Thickness Width Length Folding shape 2000mm 400m SHT 75µm ± 10% 4000mm 200m CF 105m LGT 6000mm 125m LGT Page 2 of 13
SK2VF120-1 Multilayer vacuum bagging film 8000mm 80m LGT 10000mm 75m LGT 80µm ± 10% 12000mm 75m LGT 30m LGT 16000mm 70m LGT Shelf life: unlimited. Storage conditions: recommended temperatures between +5 C and +25 C, and by relative humidity between 40-80%, in original packing, protected from direct sun and heat source. For the roll with width 16000mm other lengths are available under request. Folding shapes: SHT - sheeting, CF - centerfold, LFT = lay-flat tubing, LGT- lay-gusseted tubing. For more information, please read the technical information page: SK2VF_Folding shape. Page 3 of 13
SK2VF125-1 This highly elastic elastomer vacuum film can be perfectly used for debulk applications and deep drawing. The film has high mechanical stability (resistant to puncture), high abrasion resistance, good resistance to oil, lubricants and many solvents. Product is free from solvents and softeners. Thermoplastic elastomer Color: Natural Elongation at break: 550% DIN EN ISO 527 Tear strength: 50kN/m DIN ISO 34-1,B Maximum use temperature: 125 C Softness temperature: 155 C-170 C Density: 1,15g/cm³ Thickness Width Length 100µm 1500mm 250m 200µm 1500mm 125m 250µm 1500mm 100m Shelf life: 2 years Storage conditions: recommended T=20 C (+/- 5 C), and by relative humidity between 40-80%, in original packing, protected from direct sun and heat source. Other thicknesses and width are available on special order: Available thickness: from 25µm till 500µm Available widths, depend of film thickness: from 1m till 2,5m. By special request MOQ has to be ordered. Film available as: SHT - sheeting, CF centerfold Page 4 of 13
SK2VF180-1 Transparent nylon bagging film is formulation of Nylon 6 and Nylon 66 resin. Film has good elongation and could be used for cure cycle by temperatures up to 180 C. Nylon Color Clear Elongation at break 380% ASTM D882 Tensile strength 14.100-21.400 psi ASTM D882 Maximum use temperature 180 C Melting Point: >240 Materials to avoid Phenolic resins/strong oxidizers Please, check dimensional chart in this section for dimensional information. Shelf life: unlimited Storage conditions: recommended T=20 C (+/- 5 C) and 50 % (+/- 10 %) relative humidity, in original packing. Other thicknesses and width are available on special order: Thickness: from 19µm till 76µm Widths: 0,91m till 3,55m. By special request MOQ has to be ordered. Film available as: SHT - sheeting, CF - centerfold, LFT - lay-flat tubing Page 5 of 13
SK2VF180-2 SK2VF180-2 is a flexible bagging film made of extruded nylon. It is especially recommended for the production of advanced composite elements such as wind blades, boat hulls and sails.this product is an ideal film for the resin infusion processes and pre preg, resistant to most common types of resins, resistant to the high temperatures of the polymerization oven. SK2VF180-2 is not suited for application in autoclave. Extruded nylon Color: Light blue Elongation at break: 365% ASTM D882 Longitudinal tensile strength: 37.5MPa ASTM D882 Maximum use temperature: 180 C Thickness Width Length Folding shape 2000mm 250m V- sheet 75µm ± 5% 4000mm 250m V- sheet 6000mm 125m V- sheet 8000mm 105m Gusset Shelf life: 12 months Storage conditions: recommended temperatures between +5 C and +25 C, and by relative humidity between 40-80%, in original packing, protected from direct sun and heat source. Film available as: V- sheet, Gusset Page 6 of 13
SK2VF205-1 Transparent nylon bagging film is formulation of Nylon 6 and Nylon 66 resin. Film has very good elongation and could be used for cure cycle by temperatures up to 205 C. Nylon Color Green Elongation at break 400% ASTM D882 Tensile strength 15.400-19.000 psi ASTM D882 Maximum use temperature 205 C Melting Point: >240 Materials to avoid Phenolic resins/strong oxidizers Please, check dimensional chart in this section for dimensional information. Shelf life: unlimited Storage conditions: recommended T=20 C (+/- 5 C) and 50 % (+/- 10 %) relative humidity, in original packing. Other thicknesses and width are available on special order: Thickness: from 19µm till 76µm Widths: 0,91m till 3,55m. By special request MOQ has to be ordered. Film available as: SHT - sheeting, CF - centerfold, LFT - lay-flat tubing. Page 7 of 13
SK2VF205-2 SK2VF205-2 is an embossed etched nylon bagging film recommended for advanced composite manufactured under vacuum moulding or infusion. The structure allows a good resin or air flow. By using this film you replace both: net bleeder and breather. Perfect for debulking operation. This etched film has an excellent heat stability and very good mechanical properties. It is a styrene resistant film and non-porous. Do not use this film in direct contact with phenol resin. Nylon Color: Transparent Weight: 84g/m² Elongation at break: 400% ASTM D882 Maximum use temperature 205 C Materials to avoid Phenolic resins Density: 1,12g/cm³ Thickness Width Length 75µm 1600mm 125m Shelf life: unlimited Storage conditions: recommended T=20 C (+/- 5 C) and 50 % (+/- 10 %) relative humidity, in original packing. Do not expose this film to the day light. Film is UV sensitive. Film available as: SHT sheeting Total thickness of film though embossing is 430µm. Page 8 of 13
SK2VF205-3 Transparent nylon bagging film has excellent heat stability and very good chemical resistance, made of heat stabilized nylon 66. This film has high elongation and could be used for cure cycle by temperatures up to 205 C. Nylon 66 Color Clear Elongation at break 400% ASTM D882 Maximum use temperature 205 C Materials to avoid Phenolic resins/strong oxidizers Thickness Width Length Form 50µm 4570mm 229m CF - centerfold Shelf life: unlimited Storage conditions: recommended T=20 C (+/- 5 C) and 50 % (+/- 10 %) relative humidity, in original packing. Do not expose this film to the day light. Film is UV sensitive. Page 9 of 13
SK2VF220-1 Unique nylon bagging film is formulation of Nylon 66 resin. Film provides superior chemical and thermal resistance and could be used for cure cycle by temperatures up to 220 C. Nylon Color Blue Elongation at break 380% ASTM D882 Tensile strength 12.500-17.300 psi ASTM D882 Maximum use temperature 220 C Melting Point: 256 C Materials to avoid Strong oxidizers Please, check dimensional chart in this section for dimensional information. Shelf life: unlimited Storage conditions: recommended T=20 C (+/- 5 C) and 50 % (+/- 10 %) relative humidity, in original packing. Page 10 of 13
Folding shape SHT = sheeting The width of the SHT roll in the Product reference is dedicated as W. CF = centerfold The width of the roll CF in the Product reference is dedicated as 2W. LFT = lay-flat tubing The width of the roll LFT in the Product reference is dedicated as W. LGT = lay-gusseted tubing W P The width of the roll LGT in the Product reference is dedicated as 2W+2P. Page 11 of 13
Dimensional chart SHT (sheeting) Data for film in 2 mil ( 50µm) Data for film in 3 mil ( 75µm) Widths (W) Length (L) Weight roll Weight roll Widths (W) Length (L) appr. appr. inch m ft m lb kg inch m ft m lb kg 54 1,37 2000 610 106 48 54 1,37 1500 457 119 54 60 1,52 1000 305 59 27 60 1,52 1000 305 88 40 72 1,83 1000 305 70 32 72 1,83 1000 305 106 48 CF (centerfold) Data for film in 2 mil ( 50µm) Data for film in 3 mil ( 75µm) Widths (W) Length (L) Weight roll Weight roll Widths (W) Length (L) appr. appr. inch m ft m lb kg inch m ft m lb kg 96 2,44 1000 305 94 43 96 2,44 1000 305 141 64 108 2,74 750 229 79 36 108 2,74 750 229 119 54 120 3,05 750 229 88 40 120 3,05 750 229 132 60 140 3,56 750 229 103 47 140 3,56 750 229 154 70 LFT (lay-flat tubing) Data for film in 2 mil ( 50µm) Data for film in 3 mil ( 75µm) Widths (W) Length (L) Weight roll Weight roll Widths (W) Length (L) appr. appr. inch m ft m lb kg inch m ft m lb kg 27 0,69 1000 305 53 24 27 0,69 750 229 60 27 36 0,92 1000 305 70 32 36 0,92 750 229 79 36 48 1,22 1000 305 94 43 48 1,22 750 229 106 48 54 1,37 1000 305 106 48 54 1,37 750 229 119 54 60 1,52 1000 305 117 53 60 1,52 750 229 132 60 70 1,78 750 229 103 47 70 1,78 750 229 154 70 Other thicknesses and width are available on special order: Thickness: from 19µm till 76µm. Width: from 0,91m till 3,56m By special request MOQ has to be ordered. Page 12 of 13
SK2VF400-1 This polyimide film balances excellently electrical, thermal, mechanical, physical and chemical properties in a wide range of temperatures. It can be used at extreme temperatures as low as -261 C or as high as +400 C. SK2VF400-1 can be laminated, metallized, stamped, formed or coated with an adhesive layer. Polyimide Color Amber Elongation at break 50% ASTM D882 Tensile strength 165 MPa ASTM D882 Maximum use temperature 400 C Surface weight (theoretical) 108,7 g/m² for 75µm Thickness Width Length Weight appr. 75µm 1520mm 90m 14,9 kg Shelf life: unlimited Storage conditions: recommended T=20 C (+/- 5 C) and 50 % (+/- 10 %) relative humidity, in original packing. Other thicknesses and width are available on special order: Thickness: 25, 50, 125µm By special request MOQ has to be ordered. Film available as: SHT sheeting. Page 13 of 13