SEW-EURODRIVE - Driving the world All the training gear you need Course Guide
02 Training SEW-EURODRIVE, through its DriveAcademy offer comprehensive training programs in Australia. These programs have been developed to help our customers maximise the use of our products and services. Place your trust in this seal of quality. All the training gear you need
03 All the training gear you need Dear SEW Customers, Are your employees equipped to cope with the various issues posed by drive technology in their workplace? SEW-EURODRIVE, through its DriveAcademy offers a comprehensive selection of training programs in Australia. These programs have been developed to help all customers and distributors maximise our products and services. Training programs developed by SEW s DriveAcademy are designed to provide an overall better understanding of how SEW- EURODRIVE products can be best used in various applications, as well as more in-depth knowledge of specific products. These courses enable you and your staff to get the best possible preparation and end result out of the products used in your specific industry. By using the same training facilities and models that we use to train our own staff, our courses provide hands-on experience, while limited class sizes guarantee the personal attention you deserve. Courses are offered at any one of our SEW-EURODRIVE DriveAcademy centres across Australia or alternatively they can be held by request on-site. For a complete up-to-date calendar of courses offered please visit our website www.sew-eurodrive.com.au or alternatively you can speak to a member of our sales team who will gladly provide assistance in choosing the most appropriate course for you and/or your staff. We look forward to helping you reach your true potential. Yours Sincerely, Nick Lobianco Michael Stranieri General Manager SEW-EURODRIVE Pty Ltd Technical Training Manager SEW-EURODRIVE Pty Ltd
04 Training your place or ours? Training Courses developed by SEW-EURODRIVE s DriveAcademy are designed to enable your employees to get the best possible preparation for their day to day work with training that includes many practical exercises in addition to the necessary theoretical fundamentals. You can choose the venue where training is held, whether it is on-site or at any of our DriveAcademy centres across the Australia. Proximity to our customers is important to us, so to avoid any long journeys we offer scheduled courses in Melbourne, Sydney, Brisbane and on request in Perth and Adelaide. Optimum learning environment The training courses at SEW-EURODRIVE s DriveAcademy are ideally suited for hands-on experience. Multifunctional training models enable the participants to be optimally prepared for the tasks and problems they will encounter in their daily work, along with experimental facilities help to provide clarity to all questions in a practical way. Prerequisites for onsite Training More often than not training takes place at SEW-EURODRIVE S DriveAcademy facility, although we can also hold training at your premises on request. A training room with the below prerequisites will be required: - Sufficient room size for participants and training models - Projector and screen - Whiteboard - Depending on the demo units, 240Vor 2*415V, 16A sockets are required - Sufficient outlets for training models and laptops
05 Topics MOVIDRIVE MOVIDRIVE B - 3 day operation, start-up and troubleshooting 6 MOVIDRIVE B - 2 day operation, start-up and troubleshooting 6 MOVIDRIVE B - 1 day operation, start-up and troubleshooting 7 MOVIDRIVE and IPOS plus programming 7 MOVITRAC MOVITRAC B - 1 day operation, start-up and troubleshooting 8 MOVITRAC LTE-B - operation, start-up and troubleshooting 8 MOVI-PLC Control technology with MOVI-PLC - Introduction to multimotion 9 Control technology with MOVI-PLC - configurable control unit CCU 9 DOP 11C - programming and diagnostics 10 Decentralised Drive Systems MOVIMOT and MOVISWITCH - operation, start-up & troubleshooting 10 MOVIGEAR B - operation, start-up and troubleshooting 11 MOVIFIT - operation, start-up and troubleshooting 11 MOVIAXIS MOVIAXIS - 1 day operation, start-up and troubleshooting 12 Maintenance and condition repair Maintenance of SEW gearmotors 12 Terms and Conditions 13
06 MOVIDRIVE MOVIDRIVE B 3 day operation, start-up and troubleshooting - Duration: 3 days - Completion of MOVIDRIVE B 2 and 1 day courses Target group - Start up a motor in VFC and CFC operating modes - Set the parameters for terminals, setpoints, ramps and messages - Backup data with PC and keypad and load data to the inverter - Analyse and eliminate faults - Control the inverter via fieldbus - Carry out reference travel with integrated positioning and sequential control IPOS plus and perform relative and absolute positioning MOVIDRIVE B 2 day operation, start-up and troubleshooting : - Duration: 2 days Target Group: - Start up a motor in VFC and CFC operating modes - Set the parameters for terminals, set points, ramps and messages - Backup data with PC and keypad and load data to the inverter - Analysis and detection of faults & fault finding - Control the inverter via fieldbus
07 MOVIDRIVE B 1 day operation, start-up and troubleshooting : - Duration: 1 day Target Group: - Start up a motor in VFC operating mode - Set the parameters for terminals, setpoints, ramps and messages - Backup data with PC and keypad and load data to the inverter - Basic analysis and detection of faults & fault finding MOVIDRIVE and IPOS plus programming - Duration: 2 days - Requirements: Completion of MOVIDRIVE B- 3, 2, 1 day courses Target group - Use positioning and IPOS plus positioning and sequence control - Prepare the inverter for the operation of IPOS plus and perform startup - Program IPOS plus and perform startup - Program IPOS plus in the compiler programming language - Evaluate the difference between assembler and compiler programming language - Perform reference travel - Perform absolute and relative positioning - Structure and comment programs - Save data - Change speeds during ongoing positioning - Change fixed set points via IPOS plus - Start up application modules - Start up absolute encoders and the associated card and replace the encoder i Dates and contents of individual training programs are available on the internet at www.sew-eurodrive.com.au
08 MOVITRAC MOVITRAC B 1 day operation, start-up and troubleshooting General information - Duration: 1 day - Requirements: Electrical engineering basics or qualification as electrician Target group - Quickly diagnose and correct malfunctions - Save, load and copy parameters - Work with integrated keypad - Connect the frequency inverter to a PROFIBUS system - Work with MOVITOOLS MotionStudio - Set the parameters for the frequency inverter and carry out data backup MOVITRAC LTE- B operation, start-up and troubleshooting - Duration: 1 day Target Group - Diagnose and repair faults quickly - Save, load and copy parameters using PDA and software - Use the integrated operating panel - Set the parameters for the frequency inverter - Control inverter with fieldbus
09 MOVI-PLC Control technology with MOVIPLC - Introduction to MultiMotion - Duration: 3 days - Requirements: Basic PLC knowledge Target Group - Systems Integrators - Establish communications between the MOVIDRIVE inverter and MOVIPLC controller - Navigate with the MultiMotion front end using the configuration & diagnostics tools - Solve control tasks using the MultiMotion programming platform - Program and startup complex motion applications with PLC-editor - Handle the MOVIPLC confidently - Use the individual IEC 61131 programming languages and the specific SEW function blocks - Program applications for binary control or with fieldbus control from a higher level controller Control technology with MOVI-PLC - Configurable Control Unit (CCU) - Duration: 2 days - Requirements: Completion or knowledge level of previously offered frequency inverter courses Target Group - Systems Integrators - Establish communications between the MOVIDRIVE inverter and MOVIPLC controller - Navigate with the Application configurator front end using the configuration & diagnostics tools - Understanding of the use of all the application modules Velocity Control, Transparency Mode, Bus Positioning Universal Module i Dates and contents of individual training programs are available on the internet at www.sew-eurodrive.com.au
10 DOP11C programming and diagnostics - Duration: 2 day - Requirements: Completion of MOVIDRIVE B 3, 2, 1 day courses Target group - Choose the functions of DOP11C operating terminals appropriate to the specific application - Set the parameters of the operator terminal to the various functions and perform start up - Connect the operating terminal via RS-485 or Ethernet with MOVIDRIVE B, MOVITRAC B and MOVI-PLC - Diagnose faults and eliminate them Decentralised Drive Systems MOVIMOT and MOVISWITCH operation, start-up and fault repair - Duration: 1 day Target group - Wire and start up the MOVIMOT and MOVI-SWITCH drive systems, and are familiar with the features and technical data of the system - Use the SEW service tools and know when they can be used - Carry out speedy and safe diagnostics and error analysis - Respond quickly and correctly during emergency operation by using tips and tricks
11 MOVIGEAR B operation, start-up and troubleshooting - Duration: 1 day Target Group - Understand the concept of MOVIGEAR - Differentiate between the different communication protocols available with MOVIGEAR - Perform a start-up for MOVIGEAR - Perform troubleshooting and diagnostics - Operate MOVIGEAR through the binary controlled option and also through the MOVIFIT FDC via fieldbus MOVIFIT operation, start-up and troubleshooting - Duration: 1 day Target Group - Understand the concept of MOVIFIT - Differentiate between MOVIFIT FC, MC and SC, - Perform a start-up in both easy and expert mode - Upload and download parameter files using MotionStudio and external keypads - Set parameters using the software for limits, ramps and other key parameters - Control MOVIFIT MC via fieldbus - Control MOVIFIT FC technology level via fieldbus and terminal control using the MOVIPLC and PLC editor - Perform troubleshooting and diagnostics i Dates and contents of individual training programs are available on the internet at www.sew-eurodrive.com.au
12 MOVIAXIS MOVIAXIS 1 day operation, start-up and troubleshooting - Duration: 1 day Target Group - Perform motor startups with MotionStudio - Setting relevant parameters - Replacing inverters & option cards - Using Single Axis Positioning application module - Establishing communication with fieldbus cards & introduction to PDO editor Maintenance, repair and condition monitoring Maintenance of SEW gear motors General information - Duration: 2 days - Requirements: Training as a specialist, mechanic, electrical engineer or electrician Target group - Fitters Participants: - Are familiar with the design and function of SEW gear units - Can service and disassemble an SEW gear unit, evaluate causes of damage and then professionally reassemble the gear unit again - Can carry out work independently on SEW drives - Are familiar with the electrical function and mechanical design of the brake system - Are able to set up service a brake
13 Course terms and conditions Registration We request early registration in writing. The sales and delivery terms and conditions of SEW-EURODRIVE Pty Ltd are bindingly accepted upon registration. Cancellation Cancellation must occur in writing. Cancellation of a confirmed registration can occur free of charge up to 4 weeks before the start of the training. 50% of the participation fee may be invoiced where cancellation occurs a week before the start of the training. Training Contents - Training course - Training Documentation - Lunch, snacks and drinks Fee* The training fee is listed in the schedule. This must be paid once the invoice has been received. SEW-EURODRIVE s general delivery business terms and conditions apply to the payment of the seminar fee. Customised training may incur additional fees. Discounts If several employees of the same company take part in the same company take part in the same training from the training brochure, the following discounts apply: 2 participants: 5% 3 participants: 10% 4 participants: 15% Exclusion of liability Technical information in the training and training documents are provided by us to the best of our knowledge. However, we do not assume liability for any mistakes in the technical information imparted verbally or in writing in the training or contained in the training documents provided. Equally, we cannot accept liability for any damage and follow-on damage resulting from mistakes. This exclusion of liability does not apply in cases of compulsory liability for intent or gross negligence. Subject to change We reserve the right to make the following changes: Training cancellations; claims for compensation or cancellation damages may not arise there from. Adjustment of training content in line with the current state of the art, without prior notification. In individual cases, this may lead to differences from the training descriptions. *Costs per training and per participant plus GST Information Training times 1 day 8:30-4:30pm 2 days+ 8:30-4:30pm The last training day ends early at 4pm Safety regulations Training participants agree to adhere, particularly during the practice exercises, the safety and accident prevention regulations in force on the SEW-EURODRIVE operation premises. In the case of training on-site with the customer, participants will adhere to the customer specific safety and accident prevention regulations. Furthermore, the on-site safety briefing instructions are to be followed. Copyright The reproduction of course documents for unauthorized purposes as well as the distribution, exploitation and communication of their content to the third parties is not allowed. Infringements are subject to compensation. The software provided by SEW-EURODRIVE during training for the purpose of exercises may not be removed, or copied in part or whole, or used in any other, unauthorized way. Places of jurisdiction The place of jurisdiction is Melbourne i Dates and contents of individual training programs are available on the internet at www.sew-eurodrive.com.au
All the training gear you need SEW-EURODRIVE Driving the world SEW-EURODRIVE PTY LTD 27 Beverage Drive (PO Box 59) Tullamarine VIC 3043 Phone: (03) 9933 1000 www.sew-eurodrive.com.au training@sew-eurodrive.com.au