BEI JI NG JOI NTFLOW SYSTEM CO. Gat eval ve
FEATURE Solid wedge gate valves are the perfect solution as a closing device in pipeline systems. Because of the straight bore all impurities can pass through the valve without doing any harm. Combined with the full bore it will prevent pressure loss caused by turbulence. Co hard alloy welded sealing surface, which is wearing resistant, erosion proof, abrasion proof and long-lived. The surface and the adjusting media of valve shaft are nitrogenized so that it is of erosion and abrasion resistant. PN 15.0MPa ( Class900 ),the middle cavity is designed as a self-tightening sealing structure to have the sealing performance reinforced along with the pressure rise. There is no backward sealing structure in the valve to ensure the sealing reliable. APPLICATION Be suitable in applications with water supply, sewage treatment and neutral liquids in the mining industry, enterprises and high buildings. Suitable temperature: -10~300 C(DI), -29~425 C(CS), -40~ 500 C(SS). Working pressure: 1.0~16.0 Mpa, 150~900 Lb. Caution: FREEZING WEATHER PRECAUTION - Subsequent to testing a piping system, gate valves should be left in an open position to allow complete drainage. STANDARD Design and Manufacture BS5163/DIN3352/API 600/API 6D/ISO 10434 Inspection and Testing ISO 5208/API 598/API 6D Face to Face Dimension ISO 5752/EN 558/ASME B16.10 Flange Dimension ASME B16.5/ASME B16.47/AWWA C207/ISO 7005/EN 1092 *More standard specifications are available on request. TEST DATA Nominal Diameter DN (mm) 15-900 15-900 15-600 15-400 300-1200 300-1200 Nominal Pressure PN (MPa) 150lb 300lb 600lb 900lb 1.0 1.6 Hydraulic Shell Test Pressure (MPa) 3.0 7.5 16.5 22.5 1.5 2.4 Hydraulic Seal Test Pressure (MPa) 2.2 5.5 12.1 16.5 1.1 1.76 *More test specifications are available on request. reserves the right to change specifications without notice. 1
MATERIAL SPECIFICATION Parts No. Parts Name Material 1 Body Cast Iron/Ductile Iron/Carbon Steel/Stainless Steel 2 Gasket Carbon Steel/Stainless Steel+Flexible Graphite 3 Seat Alloy Steel/Forged Steel+STL/Stainless Steel/Gunmetal 4 Wedge Cast Iron/Ductile Iron/Carbon Steel+13Cr/Carbon Steel+STL/Stainless Steel 5 Stem Carbon Steel/Stainless Steel 6 Upper Sealing Carbon Steel/Stainless Steel 7 Packing Flexible Graphite 8 Packing Sleeve Cast Iron/Ductile Iron/Carbon Steel/Stainless Steel 9 Gland Bolt Alloy Steel 10 Gland Nut Alloy Steel 11 Pin Alloy Steel/Stainless Steel 12 Packing Gland Ductile Iron/Carbon Steel/Stainless Steel 13 Stud Alloy Steel 14 Bonnet Alloy Steel 15 Bonnet Cast Iron/Ductile Iron/Carbon Steel/Stainless Steel 16 Oil Cup Carbon Steel 17 Stem Nut Gunmetal 18 Cover Nut Carbon Steel 19 Hand Wheel Cast Iron/Ductile Iron/Carbon Steel 20 Locking Nut Carbon Steel 21 Screw Alloy Steel *More material specifications are available on request. reserves the right to change specifications without notice. 2
DIMENSION (1.0 & 1.6 MPa) DN NPS L BS 5163 DIN 3202 F4 DIN 3202 F5 D 0 H 1.0 H 1.6 300 12 356 270 500 460 969 969 350 14 381 290 550 600 1012 1012 400 16 406 310 600 600 1123 1123 450 18 432 330 650 600 1237 1237 500 20 457 350 700 600 1332 1332 600 24 508 390 800 600 1478 1478 700 28 610 430 900 720 1791 1791 800 32 660 470 1000 720 1946 1946 900 36 711 510 1100 720 2233 2323 1000 40 813 550 1200 720 2535 2535 1100 44 813 550 1200 720 2585 2585 1200 48 960 630 1400 720 2728 2810 *Flange dimensions (D, D 1, D 2, Z-d, b, f) refer to Catalogue of Accessory: Series 8 Flange. *More dimension specifications are available on request. reserves the right to change specifications without notice. 3
DIMENSION (150 & 300 lb) DN NPS 150lb 300lb L H H bevel-gear W W bevel-gear L H H bevel-gear W W bevel-gear 50 2 178 400-200 - 216 420-200 - 80 3 230 515-250 - 283 537-250 - 100 4 229 595-280 - 305 619 650 280 310 150 6 267 780 820 300 310 403 806 835 350 310 200 8 292 975 1020 350 310 419 1000 1030 400 310 250 10 330 1150 1200 400 310 457 1240 1280 450 310 300 12 356 1380 1430 450 310 502 1425 1460 500 310 350 14 381 1545 1580 500 310 762 1585 1620 600 460 400 16 406 1733 1780 500 460 838 1790 1830 600 460 450 18 432 1915 1990 500 460 914 1960 2000 650 460 500 20 457 2122 2220 600 460 991 2158 2220 750 460 600 24 508 2520 2600 600 460 1143 2576 2620 900 600 700 28 610-3050 - 600 1346-3080 - 600 800 32 660-3280 - 600 1524-3300 - 600 900 36 711-3720 - 600 1727-3760 - 600 *Face to face dimensions (L) herein are according to ASME B16.10. *Flange dimensions (D, D 1, D 2, Z-d, b, f) refer to Catalogue of Accessory: Series 8 Flange. *More dimension specifications are available on request. reserves the right to change specifications without notice. 4
DIMENSION (600 & 900 lb) DN NPS 600lb 900lb L H H bevel-gear W W bevel-gear L H H bevel-gear W W bevel-gear 50 2 292 444-200 - 368 500-280 - 80 3 356 558 585 280 310 381 610 660 300 310 100 4 432 665 695 300 310 457 702 750 350 310 150 6 559 868 900 450 310 610 980 1060 500 460 200 8 660 1073 1110 500 310 737 1100 1140 650 460 250 10 787 1263 1300 650 460 838 1320 1370 700 460 300 12 838 1600 1650 700 460 965 1500 1560 900 460 350 14 889 1705 1750 900 460 1029 1900 1950 900 600 400 16 991 1835 1900 900 460 1130 2050 2100 900 600 450 18 1092-2020 - 600 - - - - - 500 20 1194-2172 - 600 - - - - - 600 24 1397-2650 - 600 - - - - - *Face to face dimensions (L) herein are according to ASME B16.10. *Flange dimensions (D, D 1, D 2, Z-d, b, f) refer to Catalogue of Accessory: Series 8 Flange. *More dimension specifications are available on request. reserves the right to change specifications without notice. 5