nnex to ISO/IEC 17025:2005 declaration Element Materials Technology msterdam B.V. Locations where activities are performed under accreditation Location bbreviation/ location code Element Materials Technology msterdam (headfice) Zekeringstraat 33 1014 BV msterdam Netherlands Element Materials Technology Hengelo Jan Tinbergenstraat 128 7559 SP Hengelo Netherlands On-site H O Type activity Mechanical Testing 1. Weldments Destructive testing welds W 10.01 according to SME VIII and IX; EN 287-1; ISO 15614; ISO 9606 2. Metals Brinell hardness test W 11.01 according to ISO 6506-1; STM 370; STM E 10 3. Rockwell hardness test W 11.02 according to ISO 6508-1; STM 370; STM E 18; NSM1312-6 4. Vickers hardness test W 11.03 and W 11.06 according to ISO 6507-1; STM 370; STM E 92; NSM1312-6; STM E 384, ISO 9015 5. Tensile test W 12.01 according to EN-EN 10002-1; ISO 6892-1; ISO 9018; STM 370; STM B 557; STM E 8, O This annex has been approved by: Ir. J.C. van der Poel Chief Executive Dutch ccreditation Council Rv Page 1 5
nnex to ISO/IEC 17025:2005 declaration Element Materials Technology msterdam B.V. Type activity 6. Metals Tensile test at elevated temperature W 12.02 according to EN 10002-5; STM 370; STM E 21; ISO 6892-2 7. Bend test W 12.03 according to ISO 7438; ISO 5173; EN 910:1996; ISO 9017; STM 370; STM 615; STM E 190; STM E 290 8. Flanging W 12.04 according to ISO 8494 9. Expansion test W 12.05 according to ISO 8493 10. Ring expansion test W 12.06 according to ISO 8495 11. Flattening test W 12.07 according to ISO 8492; STM 530 12. Ring tensile test W 12.08 according to ISO 8496 13. Shear test W 12.09 according to DIN 50141; ISO 9018; SME IX 14. Cladded material Shear test W 12.10 according to DIN 50162; D 2000-Merkblatt W8; STM 264 15. Reinforced steel connections Tensile testing W 12.11 according to NEN-EN 10002-1:2001, NEN-EN 10326; ISO 6892-1 16. Bend testing W 12.12 according to ISO 7438; EN 10326 17. Reinforced steel Tensile testing W 12.13 according to NEN-6008 18. Shear testing W 12.14 according to NEN-6008 19. Shear stress measurements welds W 12.15 according to NPR-2053 Dutch ccreditation Council Rv Page 2 5
nnex to ISO/IEC 17025:2005 declaration Element Materials Technology msterdam B.V. Type activity 20. Reinforced steel Fatigue testing W 14.01 and W 14.02 according to EN 10080; NEN 6008 21. Hoisting hook Load test W 12.18 22. Metals Impact test W 13.01 according to STM 370; STM E 23; EN 10045-1:1990; EN 875:1995; ISO 148; ISO 9016 Chemical nalyses 23. Metals Optical emission spectroscopy (OES) W 21.03, W 24.02 according to STM E 415; E1009; 1086 and 1251 24. PMI analysis W 24.01 according to STM E 1476, O H, O Metallographic Investigations 25. Metals Metallographic evaluation W 31.01, W 31.02 according to STM E 3, 45, 112, 247, 381, 384, 562, 883, 930, 1077, SE J422; ISO 26146 26. Grain size determination W 31.05, W 31.02 according to STM E 112; ISO 643 27. Metal constructions Replica testing W 31.06 according to Stoomwezen T 0102 and T 0204; VGB Rule TW507; STM E 1351; Merkblatt Dampfkessel 451 83/6 (8.83); ISO 3057, O 28. Materials SEM analysis and X-ray microanalysis with EDX W 32.01 29. Metals Micro structural analysis W 32.02 30. Micro hardness test W 33.01 according to ISO 6507-1; STM E 384; ISO 4545; ISO 4516 31. Weldments Hardness measurement on transverse sections welds W 33.02 according to EN 1043-1 and 2:1996; ISO 6507-1, ISO 9015; ISO 22826 Dutch ccreditation Council Rv Page 3 5
nnex to ISO/IEC 17025:2005 declaration Element Materials Technology msterdam B.V. Type activity 32. Weldments Vickers micro hardness measurements W 33.03 33. Steel Ferrite measurement with Magne Gage W 34.01 according to NEN-EN-ISO 8249; WS 4.2; ISO 13520 34. Ferrite measurement Inductive method W 34.02, W 34.05 ; ISO 13520, O 35. Ferrite measurement Manual Point Count 36. Ferrite measurement utomatic Image nalysis Corrosion Testing W 34.03 according to STM E 562; ISO 13520 W 34.06 according to STM E 1245; STM E 562; ISO 13520 37. Metals Inter-granular corrosion testing W 41.01 according to ISO 365-1 STM 262 Practice (Oxalic cid Test) STM 262 Practice B (Streicher Test) STM 262 Practice C (Huey Test) STM 262 Practice E (Strauss Test) STM 262 Practice F STM G28 38. Pitting and Crevice Corrosion Resistance Test W 41.03 according to STM G 48 39. Metals Salt Spray testing W 41.04 according to STM B 117; STM B 368; STM G 85; ISO 9227 40. Hydrogen Induced Cracking test W 42.01 according to NCE TM-0284 41. Sulfide induced Stress Corrosion test W 42.02 according to NCE TM-0177 42. Coatings Cathodic Disbondment Test W 93.01 according to ISO 21809-3. Dutch ccreditation Council Rv Page 4 5
nnex to ISO/IEC 17025:2005 declaration Element Materials Technology msterdam B.V. Type activity Other 43. Reinforced steel 44. Constructions and components Dimensional inspection W 92.01 according to NEN-6008; ISO 15630; EN 10080 Opinions and interpretations Failure analysis W 30.01, W 50.01 in house method, O Dutch ccreditation Council Rv Page 5 5