SoaSA Technology International Ltd. EN Pendulum Test-Impact test method and classification for flat glass SaoSA Resin Laminated Glass (4-1-4)

Transcription

1 TNO report TC-RAP /rie. EN Pendulum Test-Impact test method and classification for flat glass SaoSA Resin Laminated Glass (4-1-4) De Rondom 1 P.O. Box 6235 The Netherlands T F info-ient@tno.nl Date August 4, 2006 Author(s) L. van der Ven - Le Comte Assignor. Project number /01.01 Number of pages 9 (incl. appendices) All rights reserved. No part of this report may be reproduced and/or published in any form by print, photoprint, microfilm or any other means without the previous written permission from TNO. All information which is classified according to Dutch regulations shall be treated by the recipient in the same way as classified information of corresponding value in his own country. No part of this information will be disclosed to any third party. In case this report was drafted on instructions, the rights and obligations of contracting parties are subject to either the Standard Conditions for Research Instructions given to TNO, or the relevant agreement concluded between the contracting parties. Submitting the report for inspection to parties who have a direct interest is permitted TNO

2 2 / 9 Contents 1 Processor/manufacturer of the samples Product description & results Signature... 5

3 3 / 9 1 Processor/manufacturer of the samples Production plant of the samples : SaoSA glass lamination plant Sampling date : February 2006 Under responsibility of:.

4 4 / 9 2 Product description & results Commercial product name (k) : SaoSA Resin Laminated Glass (4-1-4) Product (a) : 44.1 laminated glass Glass substrate(s) (j) : Float glass (EN572) * Intermediate layer (j) : 1x SAOSA UV-H RESIN Glass type : Laminated glass Product configuration : 44.1 laminated glass Nominal thickness of tested glass test specimens (a) : 8 mm Dimensions of tested glass test specimens (b) : 876 ± 5 mm by 1938 ± 5 mm Application of adhesive foils (f) : none Date (i) : * substrate float glass conforms to applicable standards from selected manufacturer or supplier Calibration of test ridge (e) : September 2004 Test Laboratory (g) : TNO Science & Industry P.O. Box 6235 (NL) Notification number test Laboratory (89/106/EEG) (h): Lab number 1154 Results (c): Height (mm) Test 1 Test 2 Test 3 Test no breakage breakage < 4a no breakage breakage < 4a 450 breakage < 4a breakage < 4a breakage < 4a breakage < 4a 1200 breakage < 4a breakage < 4a breakage < 4a breakage < 4a Classification (d): 1(B)1 In case of changes that may influence the validity of this ITT, the producer will take the appropriate actions.

5 5 / 9 3 Signature Eindhoven, August 2006 TNO Science and Industry Business Unit Testing & Consultancy J. van der Zwan, B.Sc. K.K. Pahnke, M.Sc. Author Head of Department

6 6 / 9 TNO Industrie en Techniek Postbus 6235 Nederland Not. Lab Datum: EN Slingerproef Stootbelasting en classificatie voor vlakglas Fabrikant: SaoSA glass lamination plant Onder verantwoordelijkheid van:. Product: SaoSA Resin Laminated Glass (4-1-4) Testresultaat: 1(B)1 De geteste monsters voldoen aan de gestelde eisen in de EN Ondertekening: Ing. L. van der Ven-le Comte Project Leider Ing. A.J. Piers Programma Leider

7 7 / 9 TNO Science and Industry P.O. Box 6235 Netherlands Not. Lab Date: EN Pendulum test Impact test method and classification for flat glass Producer: SaoSA glass lamination plant Under responsibility of:. Product: Test result: SaoSA Resin Laminated Glass (4-1-4) 1(B)1 The tested samples are complying with the requirements of EN Signature: L. van der Ven-le Comte, B.Sc. A.J. Piers, B.Sc. Project Leader Programme Leader

8 8 / 9 TNO Science and Industry Postfach 6235 Die Niederlande Not. Lab Datum: EN Pendelschlagversuch Verfahren für die Stoßprüfung und die Klassifizierung von Flachglas Hersteller: SaoSA glass lamination plant Unter Verantwortung von:. Produkt: SaoSA Resin Laminated Glass (4-1-4) Testergebnis: 1(B)1 Die getesteten Muster entsprechen den Anforderungen von EN Unterschrift: Ing. L. van der Ven-le Comte Project Leiter Ing. A.J. Piers Programm Leiter

9 9 / 9 TNO Science and Industry B.P 6235 Pays-Bas Not. Lab Date: EN Essai au pendule Méthode d essai d impact et classification du verre plat Fabricant: SaoSA glass lamination plant Sous la responsabilité de:. Produit: SaoSA Resin Laminated Glass (4-1-4) Résultat des essais: 1(B)1 Les échantillons mis à l'essai remplissent les conditions définies dans EN Signature : L. van der Ven-le Comte, ingénieur A.J. Piers, ingénieur Chef de project Chef de programme