SIMATIC. Distributed I/O Using SIMATIC CFU PA - GSDML. Security information 1. Using SIMATIC Compact Field Unit PA with GSDML 2. Product Information

Size: px

Start display at page:

Download "SIMATIC. Distributed I/O Using SIMATIC CFU PA - GSDML. Security information 1. Using SIMATIC Compact Field Unit PA with GSDML 2. Product Information"

Shannon Theodora Reynolds
5 years ago
Views:

1 Security information 1 Using SIMATIC Compact Field Unit PA with GSDML 2 SIMATIC Distributed I/O Product Information 11/2017 A5E AA

2 Legal information Warning notice system This manual contains notices you have to observe in order to ensure your personal safety, as well as to prevent damage to property. The notices referring to your personal safety are highlighted in the manual by a safety alert symbol, notices referring only to property damage have no safety alert symbol. These notices shown below are graded according to the degree of danger. DANGER indicates that death or severe personal injury will result if proper precautions are not taken. WARNING indicates that death or severe personal injury may result if proper precautions are not taken. CAUTION indicates that minor personal injury can result if proper precautions are not taken. NOTICE indicates that property damage can result if proper precautions are not taken. If more than one degree of danger is present, the warning notice representing the highest degree of danger will be used. A notice warning of injury to persons with a safety alert symbol may also include a warning relating to property damage. Qualified Personnel The product/system described in this documentation may be operated only by personnel qualified for the specific task in accordance with the relevant documentation, in particular its warning notices and safety instructions. Qualified personnel are those who, based on their training and experience, are capable of identifying risks and avoiding potential hazards when working with these products/systems. Proper use of Siemens products Note the following: Trademarks WARNING Siemens products may only be used for the applications described in the catalog and in the relevant technical documentation. If products and components from other manufacturers are used, these must be recommended or approved by Siemens. Proper transport, storage, installation, assembly, commissioning, operation and maintenance are required to ensure that the products operate safely and without any problems. The permissible ambient conditions must be complied with. The information in the relevant documentation must be observed. All names identified by are registered trademarks of Siemens AG. The remaining trademarks in this publication may be trademarks whose use by third parties for their own purposes could violate the rights of the owner. Disclaimer of Liability We have reviewed the contents of this publication to ensure consistency with the hardware and software described. Since variance cannot be precluded entirely, we cannot guarantee full consistency. However, the information in this publication is reviewed regularly and any necessary corrections are included in subsequent editions. Siemens AG Division Process Industries and Drives Postfach NÜRNBERG GERMANY A5E AA P 12/2017 Subject to change Copyright Siemens AG All rights reserved

3 Table of contents 1 Security information Using SIMATIC Compact Field Unit PA with GSDML General DI/DO CFU and field devices...8 Product Information, 11/2017, A5E AA 3

4 Table of contents 4 Product Information, 11/2017, A5E AA

5 Security information 1 Siemens provides products and solutions with industrial security functions that support the secure operation of plants, systems, machines, and networks. In order to protect plants, systems, machines and networks against cyber threats, it is necessary to implement and continuously maintain a holistic, state-of-the-art industrial security concept. Siemens products and solutions constitute one element of such a concept. Customers are responsible for preventing unauthorized access to their plants, systems, machines and networks. Such systems, machines and components should only be connected to an enterprise network or the internet if and to the extent such a connection is necessary and only when appropriate security measures (e.g. firewalls and/or network segmentation) are in place. For additional information on industrial security measures that may be implemented, please visit: Siemens products and solutions undergo continuous development to make them more secure. Siemens strongly recommends that product updates are applied as soon as they are available and that the latest product versions are used. Use of product versions that are no longer supported, and failure to apply the latest updates may increase customer s exposure to cyber threats. To stay informed about product updates, subscribe to the Siemens Industrial Security RSS Feed under Product Information, 11/2017, A5E AA 5

6 Security information 6 Product Information, 11/2017, A5E AA

7 Using SIMATIC Compact Field Unit PA with GSDML 2 This document contains information on using SIMATIC Compact Field Unit PA (CFU PA) by integration through GSDML. Valid for the CFU PA with article numbers 6ES7655-5PX11-0XX0. When integrating per GSDML, you must use a CPU PA with the following firmware: CFU as of firmware version V1.0.1 Note the following restrictions compared to integration of the CFU PA when using SIMATIC PCS 7 V9.0 and higher. General (Page 7) DI/DO (Page 8) CFU and field devices (Page 8) Additional information on SIMATIC Compact Field Unit PA (CFU PA) Internet: ID> Entry ID: > Commissioning Manual SIMATIC; Distributed I/O; SIMATIC CFU PA 2.1 General Read back parameters The function "Read back IOs" is not available. Replacing bus adapter The bus adapter must be replaced in two steps (each port separately). Only related port pairs may be replaced. Swapping object Objects (modules, submodules) cannot be swapped. Firmware update Use the firmware update function of your engineering system for the firmware update. The firmware update is possible with standard SIMATIC mechanisms. A firmware update can take a longer period. Example: Firmware update with SIMATIC STEP 7 1. Select the menu command "PLC > Show accessible devices". 2. Select the CFU. 3. Execute the firmware update with the following menu command: "PLC -> Update firmware" Product Information, 11/2017, A5E AA 7

8 Using SIMATIC Compact Field Unit PA with GSDML 2.3 CFU and field devices 2.2 DI/DO Configuring channels Each channel must be separately configured. The use of the GSDML does not provide the option of simultaneously processing all channels. Channel configured as "DI" When a channel is configured as DI, the following parameters are ignored: "Diagnostics: Short circuit to L+" "Reaction to CPU STOP" 2.3 CFU and field devices Using SIMATIC PDM The parameter assignment of the field devices and the CFU is only possible via SIMATIC PDM. Planning the network for Engineering The engineering system must be located in the subnet of the CFU PA. Using SIMATIC PDM for access to field devices and configuration The field devices must be created directly in SIMATIC PDM. Open SIMATIC PDM manually. This is the only way to access the configuration or the field devices. SIMATIC PDM cannot be opened automatically from the engineering system (e.g. with double-click on the field device). Connecting field devices You can connect field devices by using PA profiles (16 PA profiles). Manufacturer-specific GSDs cannot be used. Labeling the field devices An "Expected TAG" is not displayed in the EDD Wizard. 8 Product Information, 11/2017, A5E AA

Safety Integrated. Introduction and Terminology for Functional Safety of Machines and Systems. Reference Manual January Answers for industry.

Safety Integrated. Introduction and Terminology for Functional Safety of Machines and Systems. Reference Manual January Answers for industry. Siemens AG 2013 Introduction and Terminology for Functional Safety of Machines and Systems Reference Manual January 2013 Safety Integrated Answers for industry. Introduction and Terminology for Functional