SMD. Structural Floor and Roof Solutions. Product Selector Steel Floor & Roof Decking
|
|
- Andrea Farmer
- 5 years ago
- Views:
Transcription
1 SMD Structural Floor and Roof Solutions Product Selector Steel Floor & Roof Decking
2 Regents Place, London 40,000 sqm, Floor Decking 1
3 The right product, the right choice The floor and roof decking market offers a wide range of competitive products from various manufacturers. Choosing the correct one to suit your project needs can be confusing. With our comprehensive range of profiles, SMD have the experience, knowledge and expertise to help you decide. When selecting the type of deck profile to use there are many factors that need to be considered. These include span, loadings, cost and speed of installation amongst others. This guide provides a useful quick reference detailing product properties, typical spans and compares the strengths of each product (shown in the last five columns). The information included is only intended as a guide and is no substitution to talking directly to one of our Sales or Technical Teams, who will be able to assess in more depth the project specific requirements and most appropriate product. For product-specific data sheets, a copy of The White Book (Floor Deck Design Guide and Tables) or to download Elements Design Software, which gives you the ability to prepare comprehensive design calculations, visit our website. If you need further help Contact our Technical team on or technical@smdltd.co.uk
4 Product Specification Floor Profiles Based on slab depths of mm Sectional Detail R Cover Width Available Coatings Nominal Thickness mm kg/m2 cm4/m Height of Neutral Axis mm Area of Steel mm2/m Steel Grade N/mm2 Available Coatings Nominal Thickness mm kg/m2 kn/m Steel Grade N/mm2 137 TR60 0 Cover width TR Cover Width Roof Profiles Sectional Detail 0 Cover width Cover width Cover width Cover width Cover width Cover width Cover width Cover width Yes Span Cost Speed Aesthetics Load Sheet Length Span Cost Speed Aesthetics Load Bottom Flange in Compression Double span m** Cantilever m*** No Sheet Length Single span m** Cantilever m (unpropped)* 240 No Double Span m (unpropped) Capacity Single Span m (unpropped) Crushed Ends Capacity Top Flange in Compression Concrete Volume m3/m2 Product Selector based on profile strengths (3 ticks being the strongest) TABLE KEY *Cantilever values indicated for floor deck are governed by Health and Safety during installation. **The maximum span values in Table 8.1a are based on the following design criteria: Imposed Load of 1.5kN/m² or Line Load of 2kN/m, Partial Load Factor of 1.5 (considering all load as Variable ), Imposed Load Deflection Limit of Span/200, Wind Uplift of 1.5kN/m², subject to appropriate fixings, Wind Uplift Deflection Limit of Span/90. ***The maximum cantilever figures indicated in this document are based on a point load of kn positioned at the end of the cantilever. maximum sheet lengths are limited due to site Health and Safety manual handling guidelines. 4
5 Services we provide Fall Arrest Safety Systems Safety Netting and Airbags Supply Only / Supply and Fix of Steel Floor Deck & Edge Shuttering Supply Only / Supply and Fix of Shear Studs (On site or Factory Fitted) Supply Only / Supply and Fix of Steel Roof Deck Concrete Slabs on Steel Floor Deck Contact us today for a competitive quotation For all your Technical guidance and requirements, please contact estimating@smdltd.co.uk or call , where our team will be happy to advise you. SMD Structural Floor and Roof Solutions UK Tel: UK 44 (0) contactus@smdltd.co.uk UK Head Office The Outlook Ling Road Tower Park Poole Dorset BH12 4PY UK UK Midlands Logistics Centre Units 12 Nunn Brook Rise County Estate Huthwaite Nottinghamshire NG17 2PD UK Scottish Logistics Centre 12 Palacecraig Street Coatbridge North Lanarkshire ML5 4RY International Offices United Arab Emirates Dubai uae.export@smdltd.co.uk India Mumbai india@smdltd.co.uk SMD is a trading name of Structural Metal Decks Limited. Copyright Liable to change without notice. Version 4.2
SMD. Structural Floor and Roof Solutions. Site Protection and Access Solutions
SMD Structural Floor and Roof Solutions Site Protection and Access Solutions Creechurch Place, London 29,600 sqm, Floor Decking Site solutions with added value With a large range of solutions to site safety,
More informationSMD. Mobile Stud Welding Solutions. Single Source Stud Welding Solution
SMD Mobile Stud Welding Solutions Single Source Stud Welding Solution SPECIALIST STUD WELDING CONTRACTORS FOR CONSTRUCTION PROJECTS, BRIDGES AND STEEL PILING SMD provide the largest UK on-site and works
More informationMetal Decking Specialists
Metal Decking Specialists Technical Design. Manual Manufacture. and Guidance Installation. Notes Contents Introduction 03 Introduction 04 SMD Product Selector Technical and Design Support 05 How can SMD
More informationMetal Decking Specialists
Metal Decking Specialists TAB-Deck Composite Slabs Design Guidance for TAB-Deck Composite Slabs using SMD metal decking reinforced with ArcelorMittal steel fibres Introduction Prospect Park, Hurley - 5800m2
More informationDesign Guidance for TAB-Deck Composite Slabs using SMD Metal Decking reinforced with ArcelorMittal Steel Fibres
Design Guidance for TAB-Deck Composite Slabs using SMD Metal Decking reinforced with ArcelorMittal Steel Fibres Version 2 Revised October 2008 Design Guidance for TAB-Deck Composite Slabs using SMD Metal
More informationCOMPOSITE STRUCTURES PREPARED BY : SHAMILAH
COMPOSITE STRUCTURES PREPARED BY : SHAMILAH ANUDAI@ANUAR INTRODUCTION Steel and Concrete Composite Construction Composite construction aims to make each material perform the function it is best at or to
More information2016 DESIGN AND DRAWING OF REINFORCED CONCRETE STRUCTURES
R13 SET - 1 DESIGN AND DRAWING OF REINFCED CONCRETE STRUCTURES 1 Design a simply supported rectangular beam to carry 30kN/m superimposed load over a span of 6m on 460mm wide supports. Use M20 grade concrete
More informationStructural Products. Multideck 50-V3 Galvanised Steel Floor Decking System
Structural Products & Systems Multideck Multideck 50-V3 Galvanised Steel Floor Decking System Meadowhall Extension, Sheffield UK. Image courtesy of MSW (UK) Ltd. 2 Introduction Structural Products & Systems,
More informationStructural Steel Products UK & Ireland. Multideck Technical Handbook
Structural Steel Products UK & Ireland Multideck Technical Handbook 2 Structural Steel Products Multideck Multideck Structural Steel Products 3 4 Structural Steel Products Multideck Contents Multideck
More informationMultideck 146. Contents
Contents Specification and Design 55 Load Tables 57 Fire Performance 60 Sound Attenuation 63 Concrete Volume Savings composite steel deck is optimised to minimise the concrete volumes on longer spans providing
More informationTalk to us, THE SMART DECKING PEOPLE Visit or Global Roofing Solutions Bond-Dek Composite Deck
Talk to us, THE SMART DECKING PEOPLE Visit www.globalroofs.co.za or email info@globalroofs.co.za Global Roofing Solutions Bond-Dek Composite Deck Bond-Dek composite deck Bond-Dek is a composite steel flooring
More informationThe difference is Guidance for the preparation of Deck Manufacturing Schedules
The difference is Guidance for the preparation of Deck Manufacturing Schedules innovation, commitment, support. 2 Guidance for the preparation of Deck Manufacturing Schedules Minimum Requirements for Schedule
More informationTechnical Manual - Section 6. Lytag LWAC in Steel Decking and Composite Floors
Uniclass L342:P224 EPIC C251:X223 CI/SfB (23) Eq7 Technical Manual - Section 6 Lytag LWAC in Steel Decking and Composite Floors Introduction... 2 Benefits of Composite Construction... 2 Speed of construction...
More informationComFlor manual Composite floor decking design and technical information
ComFlor manual Composite floor decking design and technical information 1 Contents 4 Introduction 6 Span parameters 8 ComFlor 46 14 ComFlor 51 + 20 ComFlor 60 26 ComFlor 80 32 ComFlor 100 36 ComFlor 210
More informationMasterSeries Composite SlimFloor Beam Design Sample Output
MasterSeries Composite SlimFloor Beam Design Sample Output The following output is from the MasterBeam Composite SlimFloor Design program. Contents 2 UC SlimFloor Beam 4 Built Up SlimFloor Beam 6 ASB SlimFloor
More informationUNIVERSITY OF BOLTON WESTERN INTERNATIONAL CENTRE FZE. BEng (HONS) CIVIL ENGINEERING SEMESTER ONE EXAMINATION 2015/2016
OCD59 UNIVERSITY OF BOLTON WESTERN INTERNATIONAL CENTRE FZE BEng (HONS) CIVIL ENGINEERING SEMESTER ONE EXAMINATION 2015/2016 ADVANCED STRUCTURAL ANALYSIS AND DESIGN MODULE NO: CIE6001 Date: Tuesday 12
More informationLevel 6 Graduate Diploma in Engineering Structural analysis
9210-111 Level 6 Graduate Diploma in Engineering Structural analysis Sample Paper You should have the following for this examination one answer book non-programmable calculator pen, pencil, ruler, drawing
More informationTechnical Manual. The difference is.
Technical Manual The difference is www.rlsd.com innovation, commitment, support. 2 www.rlsd.com For a service with a difference, choose Richard Lees Steel Decking, the UK specialist steel decking company
More informationDiploma in Civil Engineering. Term-End Examination June, BCE-041 : THEORY OF STRUCTURES II
No. of Printed Pages : 6 BCE-041 Diploma in Civil Engineering Term-End Examination June, 2012 00819 BCE-041 : THEORY OF STRUCTURES II Time : 2 hours Maximum Marks : 70 Note : Question number 1 is compulsory.
More informationMAHALAKSHMI ENGINEERING COLLEGE
MAHALAKSHMI ENGINEERING COLLEGE TIRUCHIRAPALLI-621213 QUESTION BANK CE2404 PRESTRESSED CONCRETE STRUCTURES UNIT 4 COMPOSITE CONSTRUCTION PART A (2 marks) 1. Define propped construction. (AUC May/June 2013,
More informationUNIVERSITY OF BOLTON WESTERN INTERNATIONAL COLLEGE FZE. BEng (HONS) CIVIL ENGINEERING SEMESTER ONE EXAMINATION 2018/2019
OCD030 UNIVERSITY OF BOLTON WESTERN INTERNATIONAL COLLEGE FZE BEng (HONS) CIVIL ENGINEERING SEMESTER ONE EXAMINATION 2018/2019 ADVANCED STRUCTURAL ANALYSIS AND DESIGN MODULE NO: CIE6001 Date: Tuesday 8
More information3.4.2 DESIGN CONSIDERATIONS
3.4.2 DESIGN CONSIDERATIONS Formwork Where Flatdeck sheet is used as formwork, the profile provides resistance to wet concrete (G) and construction loads (Q). Maximum formwork spans given in Section 3.4.4.1
More informationHollowcore Floors. The ideal structural floor solution for all building types in all sectors.
Hollowcore Floors Hollowcore Floors The ideal structural floor solution for all building types in all sectors. 2 3 System Overview Prestressed hollowcore units form part of the comprehensive range of precast
More informationCHAPTER FIVE 5.1 MODELING OF A TEN-STOREY BUILDING
CHAPTER FIVE 5.1 MODELING OF A TEN-STOREY BUILDING Three simple multi-storey buildings for a typical office complex of structural beam floors were analyzed using PROKON finite element model package to
More informationPROFILED SHEETING NP EN COLD FORMED SECTIONS STANDARD
PROFILED SHEETING COLD FORMED SECTIONS CE MARKING STANDARD NP EN 14782 PROFILED SHEETING JUL2013 05 COMPANY 05 QUALITY POLICY 06 INTRODUCTION 07 PROFILED SHEETING 10 DESIGN TABLES 11 12 14 16 18 20 22
More informationUNIT IVCOMPOSITE CONSTRUCTION PART A
UNIT IVCOMPOSITE CONSTRUCTION PART A 1. What is composite section of pestressed concrete? [A/M 16] A composite section in context of prestressed concrete members refers to a section with a precast member
More informationA key consideration when specifying a composite steel deck floor is durability and more specifically, the life to first maintenance (LTFM).
SMD Structural Floor and Roof Solutions Technical Guidance Sheet Durability of Steel Deck Composite Floors Introduction SMD (Structural Metal Decks Ltd), have supplied and installed millions of square
More informationVALLIAMMAI ENGINEERING COLLEGE KATTANKULATHUR ST7014-INDUSTRIAL STRUCTURES QUESTION BANK
VALLIAMMAI ENGINEERING COLLEGE KATTANKULATHUR ST7014-INDUSTRIAL STRUCTURES QUESTION BANK Prepared by Ms.K.Suganya Devi Assistant Professor Department of Civil Engineering UNIT-1 PLANNING AND FUNCTIONAL
More informationFlexure and Serviceability Limit State
UNIT 3 Flexure and Serviceability Limit State Beam A structural member that support transverse (Perpendicular to the axis of the member) load is called a beam. Beams are subjected to bending moment and
More informationTrailer Stage. Structural design calculations. 2nd September [00]
Trailer Stage 2nd September 2016. 2975. [00] 90 Walcot Street. Bath BA1 5BG. 01225 444194 103 Timber Yard. Drysdale Street. London N1 6ND. 020 77396939 www.momentumengineering.com Contents This document
More informationCIVIL ENGINEERING YEAR QUESTION BANK
CE 6505-DESIGN OF RC ELEMENTS CIVIL ENGINEERING SEM- V YEAR 2015-16 STAFF NAME: THIVAKAR.S A/P QUESTION BANK Subject Name: DESIGN OF RC ELEMENTS Subject Code: CE6505 PART-A UNIT I 1. What are the advantages
More informationDIVISION: METALS SECTION: STEEL DECKING REPORT HOLDER: EPIC METALS CORPORATION 11 TALBOT AVENUE RANKIN, PENNSYLVANIA 15104
0 Most Widely Accepted and Trusted ICC ES Evaluation Report ICC ES 000 (800) 423 6587 (562) 699 0543 www.icc es.org ESR 2047 Reissued 07/207 This report is subject to renewal 07/209. DIVISION: 05 00 00
More informationCHAPTER 2. Design Formulae for Bending
CHAPTER 2 Design Formulae for Bending Learning Objectives Appreciate the stress-strain properties of concrete and steel for R.C. design Appreciate the derivation of the design formulae for bending Apply
More informationFORMDECK. constructions. constructions
FORMDECK constructions constructions Introduction Formdeck300 (FD300) is a very efficient and durable permanent metal tray formwork, reinforcement and ceiling system used for suspended concrete slab construction.
More informationRoof decking profile selector. Steel & Aluminium. Corus Panels and Profiles
Corus Panels and Profiles www.coruspanelsandprofiles.co.uk Roof decking profile selector Care has been taken to ensure that this information is accurate, but Corus Group Plc, including its subsidiaries,
More informationUNIT-I DESIGN CONCEPTS, DESIGN OF BEAMS Part - A (Short Answer Questions)
S.NO IMPORTANT QUESTIONS UNIT-I DESIGN CONCEPTS, DESIGN OF BEAMS Part - A (Short Answer Questions) 1 What are the three methods of design of reinforced concrete structural elements? 2 State four objectives
More information1 Prepared By:Mr.A.Sathiyamoorthy, M.E., AP/Civil
UNIVERSITY QUESTIONS PART A UNIT 1: INTRODUCTION THEORY AND BEHAVIOUR 1. List the loss of prestress. 2. Define axial prestressing. 3. What is the need for the use of high strength concrete and tensile
More informationLecture Retaining Wall Week 12
Lecture Retaining Wall Week 12 Retaining walls which provide lateral support to earth fill embankment or any other form of material which they retain them in vertical position. These walls are also usually
More information13-14 May 2011 B.V.M. Engineering College, V.V.Nagar,Gujarat,India
COST COMPARISON BETWEEN FLAT SLABS WITH DROP AND WITHOUT DROP IN FOUR STOREY LATERAL LOAD RESISTING BUILDING Vikunj k.tilva M.E Student, Applied Mechanics Department, L. D. College of Engineering, Ahmadabad,
More informationInfluence of Depth in Single Cell & Twin Cell Box Girder
Influence of Depth in Single Cell & Twin Cell Box Girder V. Raja Srinivasa Reddy 1, P. Veerabhadra Rao 2 P.G student, Dept. of Civil Engineering, GVP College of Engineering (A), Visakhapatnam, India 1
More informationDESIGN OF SLABS. 3) Based on support or boundary condition: Simply supported, Cantilever slab,
DESIGN OF SLABS Dr. G. P. Chandradhara Professor of Civil Engineering S. J. College of Engineering Mysore 1. GENERAL A slab is a flat two dimensional planar structural element having thickness small compared
More informationDesign guide and span tables of POLKKYgiant glulam
Impregnated for weather exposed using Celcure C4 (Brown) Design guide and span tables of POLKKYgiant glulam POLKKYgiant resawn glulam is accordance with the European standard EN 14080 and is manufactured
More informationX-HVB shear connectors
X-HVB shear connectors Product data Dimensions X-HVB 140 X-HVB 15.5 51 63 14.5 0.6 31.5 51 63 X-HVB 110 X-HVB 95 51 63 11.5 X-HVB 80 50 60 80 X-HVB 40 0.6 31 4.3 43 50 60 17.5 95 X-HVB 50 50 88 5 0.6 31
More informationCork Institute of Technology. Summer 2006 Structural Design & Detailing I (Time: 4 Hours)
Cork Institute of Technology Bachelor of Engineering (Honours) in Structural Engineering Stage 2 (NFQ Level 8) Summer 2006 Structural Design & Detailing I (Time: 4 Hours) Instructions: 1. The examination
More informationThe Steel Construction Institute
Version Date of Issue Purpose Author Technical Reviewer Approved 1 21 Apr 08 Issued to client LPN WIS BAB 2 3 The Steel Construction Institute REPORT TO CORUS CSD SLIMFLOR COMPENDIUM DOCUMENT RT1147 VERSION
More informationSIDDHARTH GROUP OF INSTITUTIONS :: PUTTUR Siddharth Nagar, Narayanavanam Road QUESTION BANK (DESCRIPTIVE) UNIT-5 FOOTINGS & STAIRS
SIDDHARTH GROUP OF INSTITUTIONS :: PUTTUR Siddharth Nagar, Narayanavanam Road 517583 QUESTION BANK (DESCRIPTIVE) Subject with Code : DDRCS(13A01502) Year & Sem: III-B.Tech & I-Sem Course & Branch: B.Tech
More informationST7008 PRESTRESSED CONCRETE
ST7008 PRESTRESSED CONCRETE QUESTION BANK UNIT-I PRINCIPLES OF PRESTRESSING PART-A 1. Define modular ratio. 2. What is meant by creep coefficient? 3. Is the deflection control essential? Discuss. 4. Give
More informationModule Title: Advanced Structural Design
CORK INSTITUTE OF TECHNOLOGY INSTITIÚID TEICNEOLAÍOCHTA CHORCAÍ Semester 1 Examinations 2008/09 Module Title: Advanced Structural Design Module Code: CIVL 8001 School: Building & Civil Engineering Programme
More informationHoward County General Hospital Patient Tower Addition Columbia, MD. Kelly M. Dooley Penn State Architectural Engineering Structural Option
Howard County General Hospital Patient Tower Addition Columbia, MD Kelly M. Dooley Penn State Architectural Engineering Structural Option Project Location Located in Columbia, Maryland Intersection of
More information3.0 The importance of correct information and calculation procedure
Item Wind load design requirements for flat roofing. Evaluation of the affect of change from BS 6399-2 to the new BS EN 1991-1-4 calculation method. Contents 1.0 Introduction 2.0 Scope 3.0 The importance
More informationADAPT-Floor Pro 2009 Tutorial Export Design Strip to ADAPT-PT or ADAPT-RC
ADAPT-Floor Pro 2009 Tutorial Export Design Strip to ADAPT-PT or ADAPT-RC Update: May 2010 Copyright ADAPT Corporation all rights reserved 1 EXPORT DESIGN STRIP FROM ADAPT-FLOOR PRO TO ADAPT-PT OR ADAPT-RC
More informationCONSIDERATIONS ON THE SLIP DEMAND OF SHEAR CONNECTORS IN COMPOSITE STEEL-CONCRETE BEAMS WITH SOLID SLABS
CONSIDERATIONS ON THE SLIP DEMAND OF SHEAR CONNECTORS IN COMPOSITE STEEL-CONCRETE BEAMS WITH SOLID SLABS A. Zona 1 and G. Ranzi, * 1 School of Architecture and Design, University of Camerino, Ascoli Piceno,
More informationFire Behaviour of Steel and Composite Floor Systems Worked examples
Fire Behaviour of Steel and Composite Floor Systems Table of content Floor layout 2 Table of content Floor layout Mesh ST15C Cofraplus 60 decking Normal weight concrete 30 130 60 3 Table of content 4 Loading
More informationJob No. Sheet No. Rev. CONSULTING Engineering Calculation Sheet. Member Design - RC One Way Spanning Slab XX
CONSULTING Engineering Calculation Sheet jxxx 1 Material Properties Characteristic strength of concrete, f cu ( 60N/mm 2 ; HSC ) 35 N/mm 2 OK Yield strength of longitudinal steel, f y 460 N/mm 2 Yield
More informationREINFORCED CONCRETE DESIGN 1. Analysis of Section (Examples and Tutorials)
Analysis of Section (Example and Tutorials) by Sharifah Maszura Syed Mohsin For updated version, please click on http://ocw.ump.edu.my REINFORCED CONCRETE DESIGN 1 Analysis of Section (Examples and Tutorials)
More informationHOLLOW CORE FLOORS SPEED AND STRENGTH
HOLLOW CORE FLOORS SPEED AND STRENGTH CONTENTS 2 3 4 5 7 8 9 10 12 13 14 INTRODUCTION PRECAST CONCRETE FLOORS T HE A DVANTAGES BISON HOLLOW CORE FLOORS BEARINGS FALSE CEILINGS AND SOFFIT FIXINGS BISON
More informationRibdeck AL STRUX 90/40. efficient designs. with. shallow slabs. fibre reinforced concrete
Ribdeck AL shallow slabs efficient designs with fibre reinforced concrete Load span and fire resistance tables for the use of Ribdeck AL with fibre reinforced concrete in steel deck composite floors. Ribdeck
More informationSMD. TGNManual. Technical Guidance Notes. Structural Floor and Roof Solutions SMD.TGN.122.V9
SMD Structural Floor and Roof Solutions TGNManual Technical Guidance Notes SMD.TGN.122.V9 GUIDANCE NOTES Technical Guidance Notes Contents Page Section Title 04 - Introduction 05 1.0 Product certification
More informationCOVENANT UNIVERSITY NIGERIA TUTORIAL KIT OMEGA SEMESTER PROGRAMME: BUILDING TECHNOLOGY
COVENANT UNIVERSITY NIGERIA TUTORIAL KIT OMEGA SEMESTER PROGRAMME: BUILDING TECHNOLOGY COURSE: BLD 532 DISCLAIMER The contents of this document are intended for practice and leaning purposes at the undergraduate
More informationQuestions with Solution
Questions with Solution Q 1. Vus/d depends on a) Asv b) spacing of shear reinforcement c) grade of steel d) all of these. Refer Cl. 40.4 (a), pg. 73 IS 456:2000 V us = 0.87 f y A sv d s v 1. (d) all of
More informationFeatures and Benefits
KingFlor KF57 Features and Benefits Fielders KF57 is a steel formwork solution suitable for composite concrete slabs in concrete and steel framed construction. KF57 is a light, easy to use, steel decking
More informationComparative Study of R.C.C and Steel Concrete Composite Structures
RESEARCH ARTICLE OPEN ACCESS Comparative Study of R.C.C and Steel Concrete Composite Structures Shweta A. Wagh*, Dr. U. P. Waghe** *(Post Graduate Student in Structural Engineering, Y.C.C.E, Nagpur 441
More informationNEW COMPOSITE CONSTRUCTION OF HYBRID BEAMS COMBINING STEEL INVERTED T-SECTION AND RC FLANGE
NEW COMPOSITE CONSTRUCTION OF HYBRID BEAMS COMBINING STEEL INVERTED T-SECTION AND RC FLANGE Alex Remennikov 1, Marcus Roche 2 ABSTRACT: Steel and concrete composite beams are typically formed by shear
More informationLintels and Beams: Engineering Basis
Lintels and Beams: Engineering Basis The calculator is intended for the design of lintels and beams in timber- framed buildings generally within the scope of NZS 3604. However, the range of applications,
More informationYour Formwork Partner. YOUR FORMWORK PARTNER
YOUR FORMWORK PARTNER www.cvision.ae About Us C-Vision is one of the leading formwork engineering based solution providers covering the U.A.E, Qatar, Iraq, Saudi, Oman, Libya, and the whole of the Middle
More informationfifteen design for lateral loads Lateral Load Resistance Load Direction Lateral Load Resistance
APPLIED ARCHITECTURAL STRUCTURES: STRUCTURAL ANALYSIS AND SYSTEMS DR. ANNE NICHOLS FALL 2013 lecture fifteen design for lateral loads Lateral Load Resistance stability important for any height basic mechanisms
More informationCADS A3D MAX. How to model shear walls
CADS A3D MAX How to model shear walls Modelling shear walls in A3D MAX Introduction and synopsis This paper explains how to model shear walls in A3D MAX using the `wide column rigid arm sub-frame described
More informationDESIGN OF RC ELEMENTS UNIT 1 PART-A
DESIGN OF RC ELEMENTS UNIT 1 PART-A 1. Calculate the design strength for M 30 grade concrete and Fe 415 grade steel? 2. What is the important principle of ultimate load method? 3. Write the classification
More informationQuestions with solution
Questions with solution Q 1: The rectangular beam of width, 250 mm is having effective depth of 317 mm. The concrete grade is M20 and the grade of reinforcing steel is Fe415. The moment capacity of the
More informationLEGACY REPORT ER ICC Evaluation Service, Inc. Reissued January 1, Legacy report on the 1997 Uniform Building Code
LEGACY REPORT Reissued January 1, 2004 ICC Evaluation Service, Inc. www.icc-es.org Business/Regional Office # 5360 Workman Mill Road, Whittier, California 90601 # (562) 699-0543 Regional Office # 900 Montclair
More informationCOMPOSITE SLAB H60 DECK PROFILE
COMPOSITE SLAB H60 DECK PROFILE JUL2013 05 COMPANY 05 QUALITY POLICY 06 INTRODUCTION 07 08 H60 DECK PROFILE COMPOSITE SLABS 10 12 13 16 19 22 DESIGN TABLES EXAMPLE H60 0.7 mm H60 0.8 mm H60 1.0 mm H60
More informationGuidance Notes Design, Supply and Installation Contents
Guidance Notes Design, Supply and Installation Contents Design 18.1 General 18.2 Construction Stage 18.3 Deflection 19.1 Temporary Propping 19.2 Lateral Restraint 19.3 Cantilevers 20.1 Reinforcement 20.2
More informationIZODOM 2000 POLSKA Zduńska Wola, ul. Ceramiczna 2. tel , , tel./fax
IZODOM 2000 POLSKA 98-220 Zduńska Wola, ul. Ceramiczna 2 tel. +48 43 823 41 88, +49 43 823 89 47, tel./fax +48 43 823 23 68 www.izodom2000polska.com e-mail: biuro@izodom2000polska.com DESIGN AND CALCULATION
More informationFlat Slabs. d 2. A typical flat slab (without drop and column head)
1 CHAPTER Flat Slabs 1.1 INTRDUCTIN Common practice of design and construction is to support the slabs by beams and support the beams by columns. This may be called as beam-slab construction. The beams
More informationSabah Shawkat Cabinet of Structural Engineering 2017
3.3 Staircases Staircases provide means of movement from one floor to another in a structure. The effective span of a simply supported slab should normally be taken as the clear distance between the faces
More informationA-One Polar Ltd. Bhulta,Rupgonj,Narayangonj. ( , ) 27th April 2014
1 A-One Polar Ltd Bhulta,Rupgonj,Narayangonj. (23.754782,90545710) 27th April 2014 2 Observations Observations Knitting & Garments building Building 1 1 3 4 Observations Roof structure: no roof bracing
More informationElite Garments Ind. Ltd.
Elite Garments Ind. Ltd. Bade Kalmeswer, Board Bazar, Gazipur, Bangladesh (23.954199, 90.380240) 5th April 2014 8th April 2015 1 2 Observations Made 3 Building 5 - Steel Portal Frame Main span varies from
More informationChapter 21 Composite beams
Chapter 21 Composite beams by MARK LAWSON and PETER WICKENS 21.1 Applications of composite beams In buildings and bridges, steel beams often support concrete slabs. Under load each component acts independently
More informationfifteen design for lateral loads Lateral Load Resistance Load Direction Lateral Load Resistance
APPLIED ARCHITECTURAL STRUCTURES: STRUCTURAL ANALYSIS AND SYSTEMS DR. ANNE NICHOLS SPRING 2017 lecture fifteen design for lateral loads Lateral Load Resistance stability important for any height basic
More informationC10. Longitudinal Shear Reinforcement Design
C10. Longitudinal Shear Reinforcement Design C10.1 Introduction This section is concerned with the design of reinforcement in the vicinity of the shear studs that is necessary to control potential longitudinal
More informationComFlor decking system
Corus International ComFlor decking system Composite floor decks Introduction Introduction Corus is one of the world s leading steel suppliers, formed in 1999 by the merger of British Steel and Koninklijke
More informationThe Structural Redesign of Boyds Bear Country and its Related Systems. Boyds Bear Country, Pigeon Forge, Tennessee
The Structural Redesign of Boyds Bear Country and its Related Systems Included in this Presentation: Background and Existing System Proposal Problem / Solution Structural System Redesigns Pre-cast Concrete
More informationfifteen design for lateral loads Lateral Load Resistance Load Direction Lateral Load Resistance
APPLIED ARCHITECTURAL STRUCTURES: STRUCTURAL ANALYSIS AND SYSTEMS DR. ANNE NICHOLS FALL 2014 lecture fifteen design for lateral loads Lateral Load Resistance stability important for any height basic mechanisms
More informationAustral Deck Design for Construction Loading. Permanent formwork and Span capability
Austral Deck Design for Construction Loading Permanent formwork and Span capability Introduction The purpose of this document is to demonstrate the process of designing Austral Deck as formwork complying
More informationPosh Garments Ltd Ltd
Posh Garments Ltd Ltd 384/A, Tejgaon Industrial Area, Dhaka 1215 (23.76577, 90.39870) 6 th April 2014 1 2 Observations 3 Stress Levels in Columns Cursory calculations indicate that the working stress of
More informationSIDDHARTH GROUP OF INSTITUTIONS :: PUTTUR Siddharth Nagar, Narayanavanam Road QUESTION BANK (DESCRIPTIVE)
SIDDHARTH GROUP OF INSTITUTIONS :: PUTTUR Siddharth Nagar, Narayanavanam Road 517583 QUESTION BANK (DESCRIPTIVE) Subject with Code : DDRCS(13A01502) Year & Sem: III-B.Tech & I-Sem Course & Branch: B.Tech
More informationB TOP UC SECTION T TOP D SLAB T BOT DECKING
FIELDERS FACT FILE //////////////////////////////////////// FILE REFERENCE NUMBER: F3.5 /// APR 2018 ASYMMETRIC BEAMS FOR FIELDERS SLIMFLOR CONSTRUCTION BEAM SELECTION TABLES This fact file provides quick
More informationCOST ANALYSIS OF DOME STRUCTURE WITH RING BEAM
COST ANALYSIS OF DOME STRUCTURE WITH RING BEAM B. H. V. Pai 1 and B. Durga Prasad Baliga 2 1 Department of Civil Engineering, Manipal Institute of Technology, Manipal, Udupi, Karnataka, India 2 Department
More informationComparative Analysis and Design of Flat and Grid Slab System With Conventional Slab System
Comparative Analysis and Design of Flat and Grid Slab System With Conventional Slab System Sudhir Singh Bhaduria 1, Nitin Chhugani 2 1Professor, Department of Civil Engineering, UIT-RGPV, Bhopal 2PG Scholar,
More informationOXFORD ENGINEERING COLLEGE (NAAC Accredited with B Grade) Department of Civil Engineering LIST OF QUESTIONS
OXFORD ENGINEERING COLLEGE (NAAC Accredited with B Grade) Department of Civil Engineering LIST OF QUESTIONS Year/ Sem. : IV / VII Staff Name : S.LUMINA JUDITH Subject Code : CE 6702 Sub. Name : PRE STRESSED
More informationContents. Tables. Notation xii Latin upper case letters Latin lower case letters Greek upper case letters Greek lower case letters. Foreword.
Tables x Notation xii Latin upper case letters Latin lower case letters Greek upper case letters Greek lower case letters xii xiv xvi xvi Foreword xviii 1 Introduction 1 1.1 Aims of the Manual 1 1.2 Eurocode
More informationEN REINFORCED MASONRY DESIGN EXAMPLE 1 (NOTE: THIS USES THE UK NATIONAL ANNEX NDP VALUES)
42.50 10.00 3.00 20.00 EN 1996-1-1 REINFORCED MASONRY DESIGN EXAMPLE 1 (NOTE: THIS USES THE UK NATIONAL ANNEX NDP VALUES) Reinforced Masonry - Reinforced Brickwork Stem Cantilever Pocket-Type Retaining
More informationDesign and Analysis of Prestressed Concrete Box Girder by Finite Element Method (4 Cells & 1 Cell)
Design and Analysis of Prestressed Concrete Box Girder by Finite Element Method (4 Cells & 1 Cell) 1 Mayank Chourasia, 2 Dr. Saleem Akhtar 1 PG Scholar, 2 Professor, Department of Civil Engineering, UIT-RGPV,
More informationHalfen systems for the support and restraint of brickwork
Halfen Brickwork Support Systems Halfen systems for the support and restraint of brickwork Introduction Halfen is a leading supplier of channel fixing systems and building components, with manufacturing
More informationCheck the strength of each type of member in the one story steel frame building below.
CE 331, Summer 2015 nalysis of Steel Braced Frame Bldg 1 / 9 Check the strength of each type of member in the one story steel frame building below. 4 @ 8 ft B 20 f 1 2 3 @ 25 ft Side Elevation 3 4 Plan
More informationSMD. Technical Guidance Notes Technical Info. Structural Floor and Roof Solutions SMD.TGN.122. Version Amendments Date
SMD Structural Floor and Roof Solutions Version Amendments Date V4 All sections reviewed and updated 12.09.16 V5 Notes pages added 04.11.16 V6 Section 8.4 and 8.15 updated 08.12.16 Technical Guidance Notes
More informationCHAPTER 3 BEHAVIOUR OF FERROCEMENT HOLLOW SLABS
30 CHAPTER 3 BEHAVIOUR OF FERROCEMENT HOLLOW SLABS 3.1 INTRODUCTION There are numerous similarities between ferrocement and reinforced concrete. Both use similar matrix and reinforcement materials. They
More informationCOLUMNS 1- Definition: The Egyptian code defines columns as : 2- Types of concrete columns
COLUMNS 1- Definition: Columns are vertical compression members which carry primarily axial compression load; the axial load may be associated with bending moments in one or two directions, as shown in
More informationLORONG K, TELUK KURAU 4 STOREY STRATA-TITLE APARTMENT WITH LIFT & SWIMMING POOL. At Lorong K, Teluk Kurau, Singapore
Design, Fabrication & Supply of Materials: LORONG K, TELUK KURAU 4 STOREY STRATA-TITLE APARTMENT WITH LIFT & SWIMMING POOL At Lorong K, Teluk Kurau, Singapore CONTENT PROJECT INFORMATION 2 W&A BUILDING
More informationDesign and analysis of T and inverted L beams- Theory and Examples
Design and analysis of T and inverted L beams- Theory and Examples - Dr. E. R. Latifee Reference Book: Design of Reinforced Concrete by Jack C. McCormac and Russell H. Brown, Clemson University, 9 th Edition,
More information