Work surface solutions for the modern laboratory

Transcription

1

2 ABOUT US Counter Reaction was established to answer the demand for an independent source for fabricated work surface material and accessories to the laboratory industry. We provide our distribution network with Trespa TopLabBASE & TopLabVERTICAL for architectural interior applications and Trespa TopLabPLUS offering a high standard of hygiene, strength and durability for diverse surroundings such as chemical, analytical and biological laboratories. We fabricate to your specifications utilizing automated CNC equipment to ensure accuracy as well as meet our strict Q.C. standards during the production process. We have strategically located our fabrication facility in the Midwest / Great Lakes area to allow us to better serve the U.S and Canadian markets. Counter Reaction strives to supply the highest quality fabricated products, delivered on time, on budget as well as establish a reputation for providing a level of customer service to our clients second to none. The partners of Counter Reaction each bring their expertise in their respective roles to make up our dynamic team with over 100 years of cumulative experience in the laboratory work surface industry. Our team is comprised of the best in the industry with the experience and working knowledge of phenolic resin products as it relates to the fabrication process. We incorporate a unique system for optimal material utilization to reduce scrap and further enhance our efficiency in our process. We put to use our years of practical experience which enables us to streamline our automated order process to provide complete accountability in the Q.C. process so we can ensure we are producing the highest quality fabricated products as we track your order through production. Counter Reaction understands the need for a quality and consistent product as it relates to tolerances such as thickness and flatness. With Trespa resin panels we can supply a superior fabricated product with stringent quality control, thus resulting in a premier product by removal of the typical issues and inconsistencies found with other products in the industry. The results will be a simpler and more efficient installation on the jobsite. This will give our customers a cost advantage in the final installed price for their projects.

3 TRESPA TOPLAB PLUS A CHOICE FOR CLEAN AND STERILE WORK SURFACES Today s laboratory demands compliance with rigorous codes and standards. Therefore, selecting the right material for laboratory worktops and furniture is of crucial importance because tests and experiments depend on non-contaminated environments. COLOR COLLECTION TOPLAB PLUS Developed especially for laboratory environments, Trespa TopLabPLUS remains aesthetically pleasing while offering a high standard of hygiene, strength and durability for diverse surroundings such as chemical, analytical and biological laboratories. Trespa s underlying technology transforms wood-based fibers with thermosetting resins, under high pressure and at high temperatures, into robust compact laminate panels that meet the most challenging specifications. Trespa s unique in-house technology, Electron Beam Curing (EBC), ensures that each panel surface is easy to clean and resistant to a large number of aggressive chemicals. Benefits: Clean surface Chemical resistance Antimicrobial performance Non-Porous surfaces and edges Design flexibility Adaptable for field modifications Respect for our environment PEFC Certification FSC Certification GREENGUARD Gold Certification Panel size: 6' x 8' 5' x 10' Panel thickness: 1/2" / 13mm 5/8" / 16mm 3/4" / 20mm* 1"/ 25mm* Finish Crystal (smooth) *In Stock material Black & Silver Grey colors T White T Mystic White T Pastel Grey T Polar Green T Slate Grey T Canyon Red T Limestone Yellow T Glacier Blue T Silver Grey D Pastel Grey/Silver T Black

4 TRESPA TOPLAB BASE A SOLID AND DURABLE INTERIOR SOLUTION Engineered for lasting good looks in the most demanding interior applications, Trespa TopLabBASE is a decorative high-pressure compact laminate (HPL) with a melamine surface. Trespa TopLabBASE underlying technology transforms wood-based fibres with thermosetting resins, under high pressure and at high temperatures, into robust panels that meet the most exacting specifications. Benefits: Exceptional appearance Assured performance Impact resistant Scratch and wear resistant Moisture and mould resistant Low maintenance Solid and sturdy Environmental considerations COLOR COLLECTION TOPLAB BASE E0-00 White E2-10 Paper White E25-01 Icey Blue E3-01 Sand S0-00 White E0-02 Silver Grey S25-01 Icey Blue S3-01 Sand E0-015 Pastel Grey S0-02 Silver Grey E17-30 Heaven Blue W73-01 Beech S0-015 Pastel Grey E0-04 Mid Grey E17-32 Powder Blue W74-01 Oak Panel size: 6' x 8' 5' x 10' E20-12 Aquamarine S20-12 Aquamarine W82-03 Verona Walnut W85-02 Pear Panel thickness: 1/4" / 6mm 5/16" / 8mm 3/8" / 10mm 1/2" / 13mm 5/8" / 16mm 3/4" / 19/20mm* 1" / 25mm* S17-32 Powder Blue E17-52 Aqua Blue E0-09 Black C0-09 Black Craquele *In Stock material Black only color Finish Crystal (smooth)

5 SIMMONS EPOXY SINKS Model # Length Width Depth External Height Flange Width Thickness Waste C/L From Side Waste C/L From Rear Waste Position Radius Weight LBS A B C D E F G H R CRD end CRD corner CRD end CRD corner CRD25ADA corner CRD rear CRD rear CR corner CRD55ADA corner CRD center CRD corner Note - All dimensions are nominal. A H B G E F D C 3.00 " R1.50 " R1.18 " 2.12 "

6 ACCESSORIES Stocked sinks are black All sinks include outlet, strainer and stopper. Optional overflows are available Pegboards & Stainless Steel Drip Troughs We offer standard size and custom size pegboards to fit your needs. 6-1/2" black pegs supplied as a standard, white pegs available upon request. Stainless steel drip trough includes drain tubing. Shelving We offer wall and island shelving systems. Seismic restriants available

7 Counter Reaction Product Specification Information TRESPA TOPLAB PLUS & TRESPA TOPLAB BASE solid composite products are specified in division sections listed below Finish Carpentry - Interior Lockers Shelving Laboratory Casework Plumbing Fixtures - epoxy sinks. REFERENCES SEFA Recommended Practices for Laboratory Work Surfaces WARRANTY Worktops to be warranted against delamination for 10 years. MANUFACTURERS Raw material panels manufactured by Trespa, and provided by Trespa North America, Approved fabricators that provide products may be acquired from the above. MATERIALS Basis of design: Trespa Toplab PLUS (Crystal finish), Trespa Toplab BASE (Crystal finish) Thickness: As specified on drawings or by Architect. Color: to be selected by Architect from Manufacturer s standard color palette. FABRICATION Drip grooves shall be provided on the underside at all exposed edges unless otherwise noted on Laboratory Furnishings Drawings. All exposed edges to be sanded to a smooth finish and, except as indicated below, shall be an 1/8 bevel at front top and bottom edge and at vertical corners. Curbs shall be bonded to the top of the work surface to form a square joint. Cutouts for drop-in sinks shall be routed to form openings with 3/8 minimum depth supporting flanges and such that the rim of the sink when installed is at the same level as the work surface top. Epoxy sinks, Stainless steel and polypropylene sinks shall be set in beds of silicone sealant. SOURCE QUALITY CONTROL Panels shall be of material specifically designed for laboratory work surfaces. Material shall have uniform thickness (+0.03 ) and flatness (maximum difference of 0.03 ) for 10 foot span. Panels to be U.L. registered and labeled for quality consistency. Chemical Resistance: Evaluation of chemical resistance is based on SEFA Laboratory Work Surfaces standard list of 49 chemicals / concentrations, their required methods of testing (24 hour surface test) and their minimum acceptable results as a means of establishing a minimum acceptable level of performance for all exposed and semi-exposed surfaces. Performance requirements: Modulus of elasticity: 1,500,000 psi minimum. Shear strength: 2000 psi minimum. Compressive strength: 24,000 psi minimum. Weight: 93 lbs. per cubic foot maximum. Flame spread (ASTM E-84): Class 1A (25). Non-porous surface and edges. Will not support micro-organic growth. Will not support oxidation of material surface PROTECTION After installation, the General Contractor shall protect the worktops from damage. The tops shall be kept free from paint, plaster, cement scratches, or any other destructive forces.

8 Liberty Dr., Wixom, MI Fax For estimates or orders send info to: Sales contact: Michael J. Harris