The modern solution to in-situ concrete stairs

Size: px

Start display at page:

Download "The modern solution to in-situ concrete stairs"

Osborne Page
6 years ago
Views:

1 The modern solution to in-situ concrete stairs

2 The LEXISTIR System LEXISTIR is a permanent, lightweight galvanized steel shuttering system for forming an in-situ stair. or use on reinforced concrete and steel buildings. We offer: Comprehensive Design Service - ensuring the finest attention to detail from the outset, specifically for your project. espoke Manufacture - crafted by our highly experienced and skilled tradesmen to your specification. Delivery to Site - together with a generic method statement and lifting plan for the installation.

3 espoke Design LEXISTIR offer a full range of permanent or sacrificial balustrading, manufactured from mild steel to stainless steel, with various balustrade options such as toughened glass, structural glass and polyester powder coated perforated sheet. Specification The finish of stairs can be basic or advanced to suit any design requirements. External surfaces can simply be painted to provide a smooth background, ready for final decoration. LEXISTIR can provide polyester powder coated soffit panels with integral lighting. lternatively, plasterboard or any other finish can be used. LEXISTIR will assist in the design at the very initial stages, working with engineers/architects to provide a fully bespoke service, ensuring the final product suits your specification perfectly. STRINGERS Galvanized steel Painted finish Can be clad in powder coated aluminium LUSTRDES Pre-installed sacrificial balustrade Painted steel balustrade Stainless steel balustrade Glass infill Perforated Panels infill SOIT Powder coated aluminium panel eature groove in soffit allows for LED lighting

The LEXISTIR System Once delivered to site the composite sections of flights/landings can be simply hoisted into position, leaving the final task of

LEXISTIR comes with the half landing and rebar fully installed as standard which speeds up the build programme and safety constraints.

provides operative protection from day one. There are lifting points on each section of the stair. Simply connect a leg chain, and hoist into position.

4 The LEXISTIR System Once delivered to site the composite sections of flights/landings can be simply hoisted into position, leaving the final task of completing the rebar connections and pouring of the concrete. LEXISTIR comes with the half landing and rebar fully installed as standard which speeds up the build programme and safety constraints. temporary or permanent balustrade is included, dependent on individual project requirements, which negates the cost of erecting temporary scaffold and provides operative protection from day one. There are lifting points on each section of the stair. Simply connect a leg chain, and hoist into position. LEXISTIR will provide a generic method statement and hoisting plan on request. LEXISTIR installation. LEXISTIR installation. LEXISTIR manufacture. Improved Health and Safety Quick and simple installation Direct cost saving No need for temporary scaffold rails

dvantages in using LEXISTIR key design advantage of the LEXISTIR system is the permanent galvanised steel shuttering, with no need to install timber shuttering or the need to

The LEXISTIR system is installed as the concrete frame progresses, enabling you to walk on the staircase the following day.

pre-attached balustrade (no leading edge at any point of installation) is included, this can be a sacrificial balustrade or permanent to suit the projects needs.

5 dvantages in using LEXISTIR key design advantage of the LEXISTIR system is the permanent galvanised steel shuttering, with no need to install timber shuttering or the need to strike once the concrete is cured, as opposed to traditional shuttering methods. The LEXISTIR system is installed as the concrete frame progresses, enabling you to walk on the staircase the following day. The half landing is integral to this system, with no need to install shuttering or rebar, simply crane the unit into position. pre-attached balustrade (no leading edge at any point of installation) is included, this can be a sacrificial balustrade or permanent to suit the projects needs. typical level takes less than 1 day to install, just add final rebar connections and the concrete pour, and that s one floor complete, no striking of shuttering, just back prop the half landing and the stair can be in full use the following day. LEXISTIR is adaptable to suit design requirements, tailor-made for each project and is safe and easy to install. VERSTILE ND COST EECTIVE

Installation Procedure rom the engineers/architects drawings LEXISTIR will produce a detailed drawing for approval/comment. General Notes 1. This drawing must not be scaled. 5000.1 5000.1 E 5000.

175 L 1081 1 PL1 +17.712 750 750 125 125 2 75 75 1889 +16.250 L +16.250 L +16.125 SSL 162.5 250 1081 PL1 1 1889 +1.787 2 +13.325 L +13.325 L 2.

Construction Issue 02/08/2012 irst Issue or pproval Date Description Dtm Dtm uthor LLOY WELD Unit 5, Zone C, Chelmsford Road Ind. Est.

6 Installation Procedure rom the engineers/architects drawings LEXISTIR will produce a detailed drawing for approval/comment. General Notes 1. This drawing must not be scaled E E E Section - 1:33.3 Section - 1: Edge of Slab 1082 Edge of Slab Edge of Screed Edge of Slab and Screed 1. 1 Section C-C 1:33.3 Plan 1: L L PL L L SSL PL L L 2. Stairs will be manufactured to suit an agreed programme of works and delivered to site, ready for installation by your appointed site contractors SSL +13. SSL 1081 PL Construction Issue 02/08/2012 irst Issue or pproval Date Description Dtm Dtm uthor LLOY WELD Unit 5, Zone C, Chelmsford Road Ind. Est. Great Dunmow, Essex, CM6 1HD Tel: ax: shaun@alloyfabweld.com Web: steel advance erkeley Homes C Once construction has reached the point where the stairs are ready to be installed. section of the stair can be hoisted into place, the rebar connected, the stairs lined and levelled. Then the concrete can be poured. The stairs will be ready to be walked on 2 hours later. REDY TO USE IN JUST 2 HOURS 19/12/ P1 Index REVISIONS L C Cambridge College runswick L SSL Elevation 1:25 lexi Stair 3D View Elevation Concrete Only 1:25 Dtm 06/08/2012 s Noted [G] - 01 J1392 C LEXISTIR production stages.

7 Contact us today for more information about the benefits of the LEXISTIR system: Telephone: Mobile:

Drawings shown within this brochure is the Preston CarPark Innovation Concept and patents filed in August 2018.

Drawings shown within this brochure is the Preston CarPark Innovation Concept and patents filed in August 2018. CARPARK This brochure is designed specifically for the CarPark concept, but it can also be applied to apartments, commercial buildings, precast concrete buildings, low rise and high rise buildings. Any