NEW NEXE ROOF TILES OF LARGE DIMENSIONS, TOP QUALITY, WIDE RANGE OF COLORS AND FORTY YEAR GUARANTEE

Transcription

1

2 an d NEW NEXE ROOF TILES OF LARGE DIMENSIONS, TOP QUALITY, WIDE RANGE OF COLORS AND FORTY YEAR GUARANTEE and roof tiles come in large dimensions and by their quality, color and design they present a unique combination for your roof. Raw material of the highest quality and the latest technology enable us to make the clay roof tile of top quality, durability and timeless design. Each roof tile is baked individually, which enables the production of top quality roof tile with smooth surface and perfect geometry. Geometry of the product is designed to create a roof tile with large movable area ( up to 5 cm) and with top sealing characteristics (double seal system), and that increases the safety and diversity of application. The main characteristic of this roof tile is its size ( pcs/ m 2 ) what significantly influences the material consumption and speed of construction and in the end leads to better economical cost effectiveness. Procedure of baking without contact enables the highest quality and most modern production of colored roof tile. Colored roof tile has a unique smooth surface with increased shock resistance and wearing-out resistance. We provide the possibility of color selection of roof tiles from our color range (on request) with standard offer of colors - natur, red and black. Movable area Movable area up to 25 up to 50 Cross section of roof tile 2

3 EN 1304:2005 Nail hole yes Maximum batten distance 4 Nail size 4x50 Recoended covering area Average roof tile weight kg 4.0 Consumption of batten m /m Consumption of tile per m 2 pcs Consumption of counter batten m /m Roof ballast kg/m 2 40 Packing - 4 rows pcs/pallet 240 Roof ballast kn/m Tiles in packing pcs 5 Covering area x Dimensions of pallet 20x965 Placing of first batten - eaves 350 Packing weight kg 980 Recoended batten distance Recoended roof slope º 30 Minimum batten distance 390 Minimum roof slope º 22 Minimum roof slope (with under-construction) º 17 END TILE RIGHT SPECIAL ROOF TILE END TILE LEFT UNDER RIDGE TILE UNDER RIDGE END TILE RIGHT UNDER RIDGE END TILE LEFT IMPERIAL RIDGE TILE RIDGE FRONT TILE RIDGE END CAP 3

4 CORRECT BATTEN RANGING ON ROOF MOULD FOR BATTEN DISTANCE (always two same pieces) COVERING DIMENSIONS Lenght: Width: ROOF TILE ROOF TILE UNDER RIDGE TILE ROOF TILE S IMPERIAL RIDGE TILE h DRIP EDGE EAVES GUTTER BATTEN 3/5 cm COUNTER BATTEN 3/5 cm THERMAL INSULATION ROOF FOIL COMPACT 140 COUNTER BATTEN 3/5 cm THERMAL INSULATION BATTEN 3/5 cm ROOF FOIL COMPACT 140 BATTEN FOR RIDGE TILE roof slope a position of first batten s ~ 60 ~ 50 ~ 40 FIRST BATTEN position of batten for ridge tile h ~ 115 ~ 95 ~ 85 DETERMINING THE BATTEN DISTANCE ACCORDING TO NORM Extended - take 12 pcs of roof tile at construction site as a sample - line them up on a flat surface (concrete or board) face down - measure the distance of roof tiles in extended position (L1) and then in compact position (L2) L1 extended ( pcs) Compact L2 compact ( pcs) 4

5 ROOF ASSEMBLY DRAWING cca 50 cca cca 0 cca 95 End tile right / left 80 ROOF TILE ROOF BATTEN END TILE RIGHT RAFTER (RAFTERS) ROOF TILE END TILE RIGHT 1 End tile right 80 ROOF TILE ROOF BATTEN END TILE LEFT ROOF TILE RAFTER (RAFTERS) END TILE LEFT 1 End tile left WHEN THE ROOF IS BEING COVERED BY RIGHT AND LEFT END TILE, THE WIDTH OF ROOF SURFACE B IS TO BE PRECISELY DETERMINED, ESPECIALLY WHEN THE SIDE EAVES ARE MADE OF CONCRETE. NON-COMPLIANCE WITH THESE INSTRUCTIONS THREATENS THE TECHNICAL CORRECTNESS AND AESTHETICS OF THE ROOF. DETERMINING THE REQUIRED NUMBER OF END TILES DETERMINING THE WIDTH OF ROOF SURFACE B (per single roof slope) B=nxb+(2x25)+6 (cm) N=L:40 (pcs) n - roof tile number in a row (without left and right end tile) b - covering roof tile width (25 cm) 25 - covering width of end tile (to the eaves edge) L = length of roof surface (along the slope) in cm 40 - covering length of end tile in cm In practice: 2.5 pcs/m 5

6 III. row IV. row II. row I. row APPLICATION: Snowfence is placed in the lower area of roof surface, near the eaves. It is placed above the ventilation tile in order to enable the regular ventilation of the roof during the winter period. Snowfence can be placed as clay and metal snowfence for all types of Nexe roof tiles. ROOF TILE REQUIRED NUMBER OF UNITS (per one slope) N= n-2 2 n - roof tile number in a row CONSUMPTION: ~2-5 units/m 2 of roof. INSTALLATION: Snowfence is placed in 3 rd and 4 th row, alternately, on the place of every 4 th roof tile. ROOF GIRDER (RAFTER /12) BATTEN FOR ROOF TILE (3/5) IMPERIAL RIDGE TILE AIR OUTLET COUNTER BATTEN AIR INLET ROOF FOIL COMPACT 140 EAVES TRIM APPLICATION: Ventilation tile is placed in the ridge area, between the 1 st and 3 rd row. It is good to place the ventilation tile by the roof eaves in order to provide more ventilation. INSTALLATION: Roof tiles are placed: - for air inlet - in the second row from the bottom (from eaves up) - for air outlet - in the second row from the top (from ridge) REQUIRED NUMBER OF UNITS (per slope) - for air inlet: N1 = n x 0,25 (units) - for air outlet: N2 = n x 0,25 (units) n - number of tiles in a row REMARK: If the roof slope surface is longer than 6.00 m, ventilation tiles are to be placed in the middle of roof surface in the amount of 50 % N1 in order to prevent the interruption of air stream line. ROOF FOIL COMPACT 140 THERMAL INSULATION ROOF GIRDER COUNTER BATTEN (3/5) RAFTER (/12) VENTILATION AREA THERMAL INSULATION ROOF TILE METAL SHEET TRIM (DRIP EDGE) EAVES TRIM ROOF FOIL COMPACT 140 THERMAL INSULATION 6

7 EN 1304:2005 Nail hole yes Recoended covering area Nail size 4x50 Consumption of batten m /m Average roof tile weight kg 4.0 Consumption of counter batten m /m Consumption of tile per m 2 pcs Packing - 4 rows pcs/pallet 240 Roof ballast kg/m 2 40 Tiles in packing pcs 5 Roof ballast kn/m Dimensions of pallet 1180x965 Coverage area 4x Packing weight kg 980 Placing of first batten - eaves 350 Recoended roof slope º 30 Recoended batten distance Minimum roof slope º 22 Minimum batten distance Maximum batten distance Minimum roof slope (with under-construction) º 17 SPECIAL ROOF TILE END TILE RIGHT END TILE LEFT HALF OF ROOF TILE IMPERIAL RIDGE TILE RIDGE FRONT TILE RIDGE END CAP 7

8 CORRECT BATTEN RANGING ON ROOF MOULD FOR BATTEN DISTANCE (always two same pieces) COVERING DIMENSIONS 4 4 Lenght: 4 Width: ROOF TILE ROOF TILE VENTILATION TILE S IMPERIAL RIDGE TILE h ROOF FOIL COMPACT 140 DRIP EDGE EAVES GUTTER BATTEN 3/5 cm COUNTER BATTEN 3/5 cm THERMAL INSULATION COUNTER BATTEN 3/5 cm THERMAL INSULATION BATTEN 3/5 cm ROOF FOIL COMPACT 140 BATTEN FOR RIDGE TILE roof slope a position of first batten s ~ 60 ~ 50 ~ 40 FIRST BATTEN position of batten for ridge tile h ~ 5 ~ 85 ~ 85 DETERMINING THE BATTEN DISTANCE ACCORDING TO NORM Extended - take 12 pcs of roof tile at construction site as a sample. - line them upon a flat surface (concrete or board) face down. - measure the distance of roof tiles in extended position (L1) and then in compact position (L2). L1 extended ( pcs) Compact L2 compact ( pcs) 8

9 ROOF ASSEMBLY DRAWING cca 50 cca cca 0 cca 95 End tile right / left 80 ROOF TILE ROOF BATTEN 4 END TILE RIGHT RAFTER (RAFTERS) ROOF TILE END TILE RIGHT 1 End tile right 80 ROOF TILE ROOF BATTEN END TILE LEFT ROOF TILE RAFTER (RAFTERS) END TILE LEFT 4 1 End tile left WHEN THE ROOF IS BEING COVERED BY RIGHT AND LEFT END TILE, THE WIDTH OF ROOF SURFACE B IS TO BE PRECISELY DE- TERMINED, ESPECIALLY WHEN THE SIDE EAVES ARE MADE OF CONCRETE. NON-COMPLIANCE WITH THIS INSTRUCTIONS THREATENS THE TECHNICAL CORRECTNESS AND AESTHETICS OF THE ROOF. DETERMINING THE REQUIRED NUMBER OF END TILES DETERMINING THE WIDTH OF ROOF SURFACE B (per single roof slope) B=nxb+(2x25)+6 (cm) N=L:40 (pcs) n - roof tile number in a row (without left and right end tile) b - covering roof tile width (25 cm) 25 - covering width of end tile (to the eaves edge) L = length of roof surface (along the slope) in cm 40 - covering length of end tile in cm In practice: 2.5 pcs/m 9

10 III. row IV. row 4 II. row I. row APPLICATION: Snowfence is placed in the lower area of roof surface near eaves. It is placed above the ventilation tile in order to enable the regular ventilation of the roof during the winter period. Snowfence can be placed as clay and metal snowfence for all types of Nexe roof tiles. ROOF TILE REQUIRED NUMER OF UNITS (per one slope) N= n-2 2 n - roof tile number in a row CONSUMPTION: ~2-5 units/m 2 of roof. INSTALLATION: Snowfence is placed in 3 rd and 4 th row alternately, on the place of every 4 th roof tile. 4 ROOF GIRDER (RAFTER /12) BATTEN FOR ROOF TILE (3/5) IMPERIAL RIDGE TILE AIR OUTLET COUNTER BATTEN AIR INLET ROOF FOIL COMPACT 140 EAVES TRIM APPLICATION: Ventilation tile is placed in the ridge area, between the 1 st and 3 rd row. It is good to place the ventilation tile by the roof eaves in order to provide more ventilation. INSTALLATION: Roof tiles are placed: - for air inlet - in the second row from the bottom (from eaves up) - for air outlet - in the second row from the top (from ridge) REQUIRED NUMBER OF UNITS (per slope) - for air inlet: N1 = n x 0,25 (units) - for air outlet: N2 = n x 0,25 (units) n - number of tiles in a row REMARK: If the roof slope surface is longer than 6.00 m, ventilation tiles are to be placed in the middle of roof surface in the amount of 50 % N1 in order to prevent the interruption of air stream line. ROOF FOIL COMPACT 140 THERMAL INSULATION COUNTER BATTEN (3/5) ROOF GIRDER RAFTER (/12) VENTILATION AREA THERMAL INSULATION ROOF TILE METAL SHEET TRIM (DRIP EDGE) EAVES TRIM ROOF FOIL COMPACT 140 THERMAL INSULATION

11 IMPERIAL RIDGE TILE Nail hole yes Nail size 4x50 Average tile weight kg 3.5 EN 1304:2005 Consumption of tile per m 2 pcs 2.5 Covering area 405x235 Packing - 4 rows pcs/pallet 8 Tiles in packing pcs 4 Dimensions of pallet 20x850 Packing weight kg 405 RIDGE FRONT TILE RIDGE TILE CAP 235 ROOF EQUIPMENT We offer all equipment for your roof, which includes special roof tiles and additional roof equipment NEXE KROV PLUS. Nexe roof equipment together with aesthetics provides regular functioning, durability and individuality of your roof. If you decide to take additional roof equipment, you get the right to longer guarantee 30+ years 11

12 CONTACT Dilj industrija građevinskog materijala d.o.o. member of Nexe Grupa Ciglarska 33, 320 Vinkovci, Croatia SALES REPRESENTATIVES: Mob: +381 (0) Mob: +381 (0) February pieces