PRODUCT BULLETIN NO. 033

Transcription

1 Capral Limited ABN Distribution C1, Erskine Park Rd, Erskine Park NSW 2759 PO Box 387, St Marys NSW 1790 T F Genesis Sliding Window Mk 2 PRODUCT BULLETIN NO. 033 Notification Details The Genesis Sliding Window Mk2 has been developed to enhance the Genesis range, providing a double glazed option for the sliding window. The Mk2 sliding window is based on the Genesis sliding door in order to utilise many of the existing extrusion and hardware components. To provide product differentiation from the sliding door, dedicated rails and a window lock have been designed. Features Height adjustable steel rollers Glazing to 18mm sashes & 22mm fixed lights Single and double glazed options SLS to 2200pa & ULS to 3300pa Water performance to 370pa Common extrusions with the genesis sliding door Vent lock opening Dedicated screening system GLAZING: Single glazed panels: 4mm to 10.38mm Double glazed panels: 16mm & 18mm Dedicated rail is 43mm high (8mm shorter than the Genesis sliding door rail) Sliding and fixed light sashes are independently assembled to main outer frame which can be installed separately. SCREENING: An optional dedicated screening system has been integrated into the frame, catering for fly screens, and security frames. FileName: Prod Bull 033 GPN Genesis DG Sliding Window Mk2 - Oct 2010 Last Modified: Page 1 of 2

2 Capral Limited ABN Distribution C1, Erskine Park Rd, Erskine Park NSW 2759 PO Box 387, St Marys NSW 1790 T F LOCK: A dedicated window lock has been developed, the aesthetics of the lock is identical to the existing sliding window, the overall locking component has been simplified providing ease of assembly. It is available in lockable and non-lockable versions. ROLLERS: The rollers are height adjustable (4.5mm adjustment), have stainless steel bearing and handle a load capacity of 40kg (each) Stocked offer Erskine Park NSW - Mill Finish and 25um Clear Anodise Wangara WA - Mill Finish Sales Support Fabrication Technical manual Training module (attached) CR8 & QuoCut software Refer technical manual for machining details Please contact your Capral account manager for further information. Kind regards Daniel Harasymiw Market Manager - Residential Windows and Doors FileName: Prod Bull 033 GPN Genesis DG Sliding Window Mk2 - Oct 2010 Last Modified: Page 2 of 2

3 TRAINING MODULE SLIDING WINDOW Mk2 Updated: 10/06/2010 SLIDING WINDOW Mk2

4 CONFIGURATIONS SLIDING WINDOW Mk2 FRAME SIZE 80mm & 102.3mm CONFIGURATIONS All configurations have the provision for side, low and top fixed lights Sliding: OX, XOX, OXXO, OXO, Sliding Stacker: OXX, OXXXXO COMMONALITY Genesis Suite - in particular the Sliding Door extrusions and components

5 FEATURES SLIDING WINDOW Mk2 SINGLE GLAZING DETAILS Panel: 4mm 10.38mm Fixed Light: 4mm 12.76mm DOUBLE GLAZING DETAILS Panel: 16mm 18mm Fixed Light: 18mm 22mm

6 FEATURES SLIDING WINDOW Mk2 INTERLOCK STILES MEETING STILE THREE PANEL CLOSER STRUCTURAL MEMBERS Providing structural performance for window Aesthetically consistent with Genesis product range Double glazed extrusions shown as example only, equivalent available for single glazed

7 FEATURES SLIDING WINDOW Mk2 DEDICATED SCREENING SYSTEM The following screens can be integrated into the Genesis Sliding Window Mk2 Flyscreen SecuraMesh SupaScreen* *Must be an authorised Amplimesh Dealer to fabricate

8 FEATURES SLIDING WINDOW Mk2 COMPONENTS Exclusively designed components to improve the system s performance, function and aesthetics. Components are UV stable and anti-corrosive. Latch Set (Lockable & Non-Lockable) (aesthetically identical appearance to original Sliding Window) Bumper Block (stops Sliding Panel and holds Sill Track in position) Rollers (stainless steel bearings and 5mm height adjustable) End Gaskets (to seal frame joints) End Caps for Interlock & Meeting Stiles (conceals exposed extrusions ends) Hole Plugs (conceals drilled holes)

9 FEATURES SLIDING WINDOW Mk2 PANELS Sliding and Fixed Panels are independently glazed from the outer frame, providing ease of installation on site (in particular for heavy double glazed panels) VENTLOCK OPENING Additional Shoot Bolt Keeper allows window to be held open in set positions (approx. 100mm)

10 PRODUCT SPECIFICATIONS SLIDING WINDOW Mk2 PANEL SIZE Height: 600mm mm Width: 400mm mm Aspect Ratio 2.5:1 PANEL WEIGHT Maximum: 80kg (Max. Height: Min. Width) NOTE: To avoid racking of narrow sashes FRAME WIDTH Maximum: TRANSOM WIDTH Maximum: 6500mm 3600mm

11 PRODUCT SPECIFICATIONS SLIDING WINDOW Mk2 NATA TESTED Meets Australian Standards (AS ) STRUCTRAL PERFORMANCE Maximum Serviceability Limit State (SLS) ± 2200Pa Maximum Ultimate Limit State (ULS) ± 3300Pa WATER PERFORMANCE Maximum for all configurations ± 300Pa

12 PRODUCT SPECIFICATIONS SLIDING WINDOW Mk2 WINDOW ENERGY RATING SCHEME (WERS) DATA Uvalues Range: SHGC values Range: Specific details available at:

13 FRAME ASSEMBLY SLIDING WINDOW Mk2 FABRICATION Frame Extrusions 90 square cut Jamb Adaptor 8 angle cut Fixing Holes punched or drilled EXTRUSIONS Common with Sliding Door

14 PANEL ASSEMBLY SLIDING WINDOW Mk2 FABRICATION Panel Extrusions 90 square cut Stile Extrusions drilled, notched & routed access hole for roller adjustment EXTRUSIONS Stiles common with Sliding Door Unique Rails

15 FABRICATION SUPPORT SLIDING WINDOW Mk2 TECHNICAL MANUAL Genesis Sliding Window Mk2 technical manual provides comprehensive fabrication details TOOLING The following tools are available to reduce fabrication times and provide accurate machining of extrusions Genesis Punch Tool (To punch Jamb Slots & Fixing Holes) End Mill Cutters (To create notches in interlock stiles)

16 FABRICATION SUPPORT SLIDING WINDOW Mk2 SOFTWARE SUPPORT The following packages provide Cutting Lists, Bill of Materials and Costings for specific window configurations: Cre8 (V6 Estimating Software) QuoCut Professional CAD FILES Available upon request contact the Residential Business Unit to request files for fabricators and architects