Cladding & Shading Sector Product Guide

Transcription

1 Cladding & Shading Sector Product Guide Cladding Composite cladding and pergolas for domestic properties, commercial buildings, offices and factories....designed for the future Industrial Rail Marine Decking Cladding

2 Contents Exterior Wall Cladding 3 Product Range Selector 4 Flush Range Type 150 Flush 5 The Dura Composites range of composite cladding is suitable for a wide variety of domestic and commercial applications. The products offer the rare combination of a natural wood look allied to colour fade resistance and are an attractive, hard-wearing and low maintenance way to finish or complement the exterior of both new and refurbished buildings. Type 200 Flush 7 Type 250 Flush 8 Weatherboard Range Type 150 Weatherboard 9 Previous projects 11 Accessories 13 Essential Guide - Dura Cladding 15 Preparation & Installation 17 Colour Visualiser 20 Type 150 Flush Grey PAGE 5 Type 150 Flush Cedar PAGE 5 Solar Shading Cladding 21 Composite Timber Pergolas 25 Domestic

3 Ideally suited for all new build or refurbishment projects including: Commercial buildings such as Hotels, Factories, Schools or Offices Mixed Use Developments & Residential Complexes Barn Conversions Individual Domestic Properties Garages & Outbuildings Type 200 Flush Teak PAGE 7 Vertical Cladding PAGE 17 Commercial Type 150 Weatherboard Barn Black PAGE 9 Solar Shading Cladding PAGE 21

4 About us Dura Composites Ltd. is a leading global supplier of high performance composite cladding, flooring and structures which are ideal for the architectural, landscaping, industrial, marine and rail sectors as a long-lasting and cost-effective replacement for wood, steel and concrete. Dura Cladding in Type 150 Flush in Barn Black Our UK Headquarters is dedicated to innovation and ensures that Dura Composites is always at the forefront of composite material technology. Our growing team have extensive knowledge and practical experience of timber composites, fibreglass reinforced plastic and other related emerging materials. The range of products on offer is vast, from composite cladding, decking and fencing through to floor walkway grating, lift risers and trench covers. All products are designed to offer a low life cycle cost thanks to their low maintenance requirements and long life expectancy. Dura Composites solutions are used by a wide range of customers from global contractors to local landscapers. The Cladding and Decking ranges are available in the UK through International Timber and are 100% Forest Stewardship Council (FSC ) certified. Dura Composites products are also available through a well-established global distribution network in the Middle East, Africa and Europe. Vision To be revered globally as experts in the creation and supply of breakthrough composite product solutions - offering a scalable, performance improving and cost-effective alternative to traditional materials. Type 150 Flush in Cedar installed vertically Mission Statement To supply pioneering composite product solutions to real-world problems for customers in the industrial, rail, marine, landscaping & architectural sectors. We do this by focusing on continuous innovation, a relentless drive to understand the specific needs and operating environments of our customers and a commitment to exceptional service and care. To help us achieve our strategic vision, we will harness our global network of highly satisfied, passionate and connected customers to drive awareness of Dura as the experts in composite product solutions. We will also provide the leadership and support necessary to ensure that our employees are empowered, challenged, happy and rewarded - in recognition of the importance of their contribution to our continued growth and success. 1

5 Why Choose Composite? Whilst timber has traditionally been used for cladding and pergolas, the emergence of Composite Timber has delivered a host of advantages over traditional materials and have led it to become the number one choice for architects and specifiers looking for an attractive but futureproof solution. Strong and durable, Dura Cladding, Dura Louvre and Dura Pergola look and feel just like natural wood, but provide longerlasting solutions that are environmentally friendly, easy to install and require minimal maintenance. The Dura Composites architectural range is manufactured from a unique combination of wood and plastic which creates a Composite Timber. This highly developed precise composition combines the traditional appearance of timber with the durability of an engineered composite. It results in a vibrant, long-lasting colour which will never rot and does not require staining or painting unlike traditional hardwood. The products are suitable for both domestic applications such as exterior cladding, balconies or decking and for the most demanding commercial applications such as louvre screening, boundary fencing, exterior building cladding, decking and pergolas. Dura Cladding provides an attractive and long lasting finish Dura Cladding is available in a range of colours Innovation By listening to our customers and understanding their needs we have developed a range of products and accessories that add value throughout the supply chain. Our Composite Timber is manufactured by an extrusion process and uses a mix of recycled plastics and hardwood which are combined with bespoke additives to produce attractive and long-lasting results. Lower Maintenance Unlike traditional timber, Composite Timber from Dura Composites requires no staining or painting and won t warp or rot. With only basic cleaning required, the product still looks new after years of use and remains cost-effective over its lifecycle. Durability Our Composite Timber is an immensely versatile material which combines the traditional appearance of timber with the durability and resilience of an engineered composite. We offer a 10 year warranty and all our products have an expected 25 years service life. Appearance The unique manufacturing process used to produce our Composite Timber allows for the creation of a wide range of attractive colours that can easily rival traditional timbers. The products are colour stable with only minimal initial weathering and are the ecofriendly choice, with up to 87% recycled materials and 100% Forest Stewardship Council (FSC ) certification. 2

6 Exterior Wall Cladding Dura Cladding Dura Cladding is made using a highly developed extrusion process and has a unique timber and plastic composition. Recycled high density polyethylene polymers, recycled ground hardwoods and specifically engineered additives are harnessed together with high performance coupling agents to provide beautiful low maintenance 87% recycled and FSC Certified wall cladding. Dura Cladding provides the client with a traditional wood cladding appearance coupled with a 25 year design life and a fraction of the maintenance costs of natural wood. Applications Offices & Factories Private / Public Buildings Screening Architectural Fascias Commercial Premises Warehouses Display Areas Outbuildings & Workshops Features High Strength To Weight Ratio Permanent Colour Rot, Splinter, Warp Resistant Easy Installation Weather Resistant Fire Resistant Simple Cutting And Site Install UV Colour Stable FSC Certified No Knots Benefits Easy Handling Colour Stable No Painting And Staining No Specialist Skills Required 10 Year Warranty Euro Class Bfl-S1 Certified Only Requires Standard Tools Looks Good Through Lifespan Eco Friendly Few Wasted Planks Dimensions Cladding Plank Plank Actual Plank Maximum Weight Profile Thickness Length Width Fixing Span l/m Type 150 Flush 21mm 3600mm 150mm 600mm 2.04kg Type 150 Weatherboard 21mm 3600mm 150mm 600mm 2.34kg Type 200 Flush 21mm 3600mm 200mm 600mm 3.14kg Type 250 Flush 21mm 3600mm 250mm 600mm 3.75kg Starter Trim 21mm 3600mm 60mm 600mm 1.21kg Finishing Trim 38mm 3600mm 154mm 600mm 2.7kg External/Internal/Expansion Trim 38mm 3600mm 139mm 600mm 4.11kg Trim Insert 14mm 3600mm 28mm 600mm 0.24kg Fascia Trim 9mm 3660mm 230mm kg Fascia Trim 10mm 3660mm 140mm kg Material Specifications Characteristics Unit Test Reference Tensile Strength 15mpa BS 6399 Impact Strength 8kj ASTM D Flexural Strength 3.15gpa ASTM D Flexural Strength **** 3.13gpa ASTM D UV Aging Test Pass ISO Density 1.4g/cm3 Ceram, Stoke on Trent 24 Hour Water Absorption 1.07% ASTM D684 Flammability Resistance Euro Class Dfl-S1 BS EN (TBC) Fire Resistance Pass 476 Part 7 Class 3 Expansion Rate E-US(K-I) Ceram, Stoke on Trent Weatherability No Damage at 100 cycles MOAT 22 Thermal Conductivity W/m.K. Indicative result Maximum Thermal Expansion Rate* 0.038mm/min/ change ESG Report M5703R1 Rev1 Maximum Thermal Contraction Rate** 0.036mm/min/ change ESG Report M5703R1 Rev1 Frost Resistance No Damage DD CEN/TS :2006 Structural Wind Load-Negative <654.86kg*** ESG Report M5703R1 Rev1 Structural Wind Load-Positive <2308.6kg ESG Report M5703R1 Rev1 Sustainability FSC Certification FSC Certification Recycled content Minimum 85% recycled Ceram, Carbon footprint report *From 60 to 80 C **From 70 to 30 C ***Dura Cladding exceeded the test rig capacity ****After UV aging (1000 hours & rain) 3

7 Exterior Wall Cladding Product Range Selector Dura Cladding is available in both flush and weatherboard styles and in 3 widths from 150mm to 250mm face coverage. The availability of wider planks provides a striking finish and also benefits from reduced installation times, making them ideal for use on larger buildings. There are several attractive colours to choose from, as shown in the table below. Flush Range Weatherboard Range Type 150 Type 200 Type 250 Type 150 Plank Strength Plank Strength Plank Strength Plank Strength MEDIUM MEDIUM STRONG MEDIUM Install Speed Install Speed Install Speed Install Speed MEDIUM FAST VERY FAST MEDIUM Recycled Content Recycled Content Recycled Content Recycled Content Up to 87% 87% 85% 87% Typical Applications Typical Applications Typical Applications Typical Applications Domestic Property Residential Projects Residential Projects Commercial Projects Factories Offices Residential Projects Commercial Projects Factories Offices Barns Factories Workshops Warehouses Colours Colours Colours Colours Teak Charcoal Cedar Grey Teak Cedar Grey Barn Black The difference between Flush and Weatherboard Dura Cladding is suitable for both domestic and commercial new build & refurbishment projects and can be laid horizontally with overlapping or flush faces or vertically for those projects which require a different aesthetic. Weatherboard or Featheredge cladding is an ideal solution for those who prefer a traditional appearance and is typically used on barns, outbuildings, lodges and sheds. Available in Barn Black colour in boards of 150mm, the cladding is designed to be laid horizontally with an overlap and has an attractive rustic look. In the Flush range, Dura Cladding comes in a range of other attractive colours and sizes ranging from 150mm to 250mm. Dura Composites Flush Cladding has modular fixings that enable the cladding to be flush to the wall. 4

8 Flush Range 5

9 Exterior Wall Cladding Type 150 Flush Type 150 in Cedar Dura Cladding Type 150 Flush provides an attractive hardwearing, protective layer against the elements and is an excellent insulator. Type 150 is available in Cedar, Charcoal, Teak and Grey to suit any application. Type 150 in Cedar shown with external trim Dimensions Face Cedar All measurements are in millimetres Charcoal Teak Grey Type 150 in Teak shown alongside Dura Deck 6

10 Type 200 Flush Dura Cladding Type 200 Flush is available in Teak and looks and feels just like natural wood. Dura Composites unique Composite Timber formula produces a longer lasting cladding that is environmentally friendly, easy to install and requires minimal maintenance. Dura Cladding in use within a station canopy Type 200 Flush in Teak Dimensions Face All measurements are in millimetres Teak Exterior hotel façade using Dura Cladding Type 200 Flush in Teak 7

11 Exterior Wall Cladding Type 250 Flush Dura Cladding Type 250 Flush is available in two attractive colours Cedar and Grey. All our cladding products are UV Certified to ISO , meaning that after the initial expected weathering they will survive even the harshest of climates. Dura Cladding Type 250 Flush in Cedar Type 250 Flush in Grey Dimensions Face All measurements are in millimetres Cedar Grey Company Head Office façade utilising vertical flush cladding in Type 250 Cedar 8

12 Weatherboard Range Weatherboard Flush The difference between Weatherboard and Flush? Weatherboard or Featheredge cladding is designed to be laid horizontally with an overlap and has an attractive rustic look. The Flush range is available in a variety of different sizes and has modular fixings that enable the cladding to be flush to the wall. 9

13 Exterior Wall Cladding Type 150 Weatherboard The Dura Composites Weatherboard or Featheredge cladding is ideal for those applications where a traditional appearance is preferred, such as barns, outbuildings, lodges or domestic properties. Weatherboard cladding is designed to be laid horizontally with an overlap and has an attractive rustic look. A wide range of WPC trims and accessories are available to complement any design. Type 150 Weatherboard is equally attractive when used on domestic or commercial buildings Dimensions Face Barn Black All measurements are in millimetres BEFORE AFTER A stylish mix of rendered and Type 150 Weatherboard cladded walls can harmonise the overall look of a property s exterior and improve warmth and energy efficiency. 10

14 Previous projects

15 Exterior Wall Cladding 5 1. Domestic Property Using Type 150 Flush Dura Cladding in Special Order Colour Barn Black 2. Leisure Facility Featuring Type 150 Flush Dura Cladding in Charcoal 3. Type 200 Flush Dura Cladding in Teak 4. Dura Cladding Type 150 Flush in Cedar installed vertically 5. Dura Cladding Type 250 Flush in Grey installed vertically 6. Office Development Featuring Dura Cladding Type 150 Flush in Cedar 7. Domestic Property Featuring Dura Cladding Type 150 Flush in Cedar

16 Exterior Wall Cladding Accessories A comprehensive range of trims and accessories are available to complement your Dura Cladding design. For more information about how to prepare and install Dura Cladding, please consult the free supporting Technical Manual available on our website or from your Dura representative. Internal, External, Corner and Expansion Trim Internal, External and Expansion Trims provide a professional finish whilst allowing the composite cladding to expand and contract with the changing environment. Starter Trim Our trims provide the finishing touches to ensure a professional, clean look for your composite cladding. Finishing Trim Our range of complementary trims can be cut to size to suit window or door frames. Internal / External Trim Starter Trim Finishing Trim 13

17 Exterior Wall Cladding Trim insert position End caps Fascia Trim Insert The trim insert allows for quick installation and covering of fixings, ensuring a neat finish to your cladding project. End Caps and Plugs Our end caps clip in easily to the end of cladding planks to give your cladding a clean edge. When to use Fascias Fascias Fascia boards can be easily incorporated into any design and allow for the creation of a maintenance free roofline. Fascia trims are available in 2 sizes, depending on colour: 230mm x 9mm (Cedar, Barn Black, Charcoal & Teak) Dura Composites Cladding Trims are multi-purpose and should be cut at the relevant point using our handy reference guide. 140mm x 10mm (Grey) 14

18 Exterior Wall Cladding Our Essential Guide to Getting the Most From Your Dura Cladding Whether you re planning a commercial, residential, new-build or refurbishment cladding project, Dura Composites has a durable, simple to install, cost-effective and environmentally friendly solution to meet your needs. Our high-performance composite cladding delivers a host of advantages versus traditional materials and is the number one choice for architects, specifiers and homeowners looking for an attractive but futureproof solution. To ensure you get the best results, we recommend working with a professional contractor with previous cladding installation experience. Please ensure that the guidance provided below and in our supporting Technical Install Manual are strictly adhered to as improper installation (including the use of the use of non-approved trims, fixings and accessories) will invalidate your product warranty. To activate your product warranty after purchase, please complete the online form at warranty/ When planning your Dura Cladding, please bear in mind the key considerations opposite. To download the Dura Composites detailed Technical Manual, please visit: cladding/composite-cladding/ specs-and-information/ 15

19 Exterior Wall Cladding 1. Safety First SAFETY FIRST SAFETY FIRST Before installing any cladding product, you should review local building codes and regulations, and consult with local building officials to ensure compliance and safety. Dura Composites recommends that all cladding designs be approved by a licensed architect or engineer prior to installation. Wear protective clothing and safety equipment where necessary such as safety glasses, gloves, dust masks and long sleeves, particularly if cutting in confined spaces. Refer to the operator s manuals for safety guides for all power tools used. 2. Storage and Handling TORAGE & HANDLING SSTORAGE & HANDLING To ensure the best performance of our products, it is vital that proper care and attention is given to storage and handling of materials. Please ensure you adhere to the following guidance: Store the products on a flat and level surface in their original packaging until you are ready to install them. If stored outdoors the products must be kept in a covered area to prevent exposure to direct sunlight and weathering. Take care to ensure that boards are not stacked adjacent to sources of moisture. Professional fork lifts should always be used while uploading and discharging pallets. Pallet stacking should not exceed 4 pallets maximum. 3. Choose the Right Product for Your Needs RIGHT PRODUCT RIGHT PRODUCT Dura Cladding is ideal for both domestic and commercial new build & refurbishment projects and can be laid horizontally with either overlapping or flush faces or vertically for those projects which require a different aesthetic. In the Flush range, Dura Cladding comes in a range of other attractive colours and sizes ranging from 150mm to 300mm. Weatherboard or Feather-edge cladding is an alternative solution for those who prefer a traditional appearance and is typically used on barns, outbuildings, lodges and sheds. Available in Barn Black colour in boards of 150mm, the cladding is designed to be laid horizontally with an overlap and has an attractive rustic look. Once you have decided where you want your cladding situated, measure the length and width of the total area. Cladding is installed horizontally as standard, but Dura Cladding can also be installed vertically to provide a different final look. 4. Thermal Expansion and Contraction HERMAL EXPANSION TTHERMAL EXPANSION Extremely warm or cold outdoor temperatures play a significant role in the installation and performance of all cladding products. Following the detailed installation instructions in our supporting Technical Manual will help manage and reduce the effects of thermal expansion and contraction. Please refer to the gap guide in our Technical Manual to ensure your planks have adequate space for expansion and contraction and to preserve the service life of your cladding. Please ensure that you allow Dura Cladding to acclimatise to the exterior temperature before cutting and installing. 5. Care & Maintenance ARE & MAINTENANCE CCARE & MAINTENANCE Once you have completed the install of your Dura Cladding, we advise that the cladding is either washed down thoroughly with a yard broom or pressure washed to ensure that a good clean surface is ready for you to enjoy. Basic Cleaning Spray with a hose to remove surface debris. Use warm soapy water and a soft-bristled brush to clear dirt and/or debris from grooves or contours. Pressure Washing Pressure washers up to 1500psi may be used to maintain cleanliness of timber composites. In order to prevent any damage, always keep the pressure washer nozzle at least 15cm (6 inches) from the surface, and avoid concentrated spraying on one area for more than 3 seconds. The use of a pressure washer in this manner will not shorten the life of the material. 16

20 Exterior Wall Cladding Getting started - Our Simple Install Guide Preparation 1. Decide on which direction the cladding will be installed: It is possible to install Dura Cladding in either direction, both vertical and horizontally. Measure the length and width of the total area. As standard, any cladding should be installed horizontally. However, it is also possible to install vertically. 2. Select the area to be clad and produce a bill of quantities: Before you finalise your order, it is best to choose exactly which parts of the building that you wish to clad with Dura Cladding, how large it will be, and which cladding planks and which trims you will require. Normally, it is best to produce a bill of quantities based on a CAD layout taking into account the actual plank lengths available. This is something that we may be able to help with subject to sufficient time and information. Most customers find that it is wise to build in a waste factor of 7-10% to account for the inevitable quantity of material that cannot be used due to cutting - this may be more or less depending on the number of cuts required to fit awkward shapes. By taking these factors into account, it is more likely that all of your planks can be delivered on a single load. 3. Preparing the battening: Now that you know the direction of the cladding and the exact area of your cladding, next you must determine the batten layout. It is most common to use timber battens although other approved wall batten materials can be used so long as they are fixed to the building using a suitable fixing system. Each Dura Cladding plank must be supported every 600mm. Extra care is required in order to provide sufficient battening in and around obstacles such as windows, fascias, etc. Installation Vertical Cladding Step 1: Place the Internal Trim in position at the bottom batten. Screw into the middle of the trim. Step 2: Position External Trim so it lines up with the Internal Trim and secure to battening. Screw in Centre of grooves. Step 3: Place the first Cladding Plank at the end and secure in the middle of the elongated holes Step 4: Keep on doing this until you reach the end. Use Internal Trim at the top, position on Batten and attach with screws. Slide in the Trim Inserts at the Top and Bottom Trims. Step 5: Use External Trim, cut to size and secure with screws. If cladding carries on round corner, make sure External Trim lines up with battening. Slide in the Trim Insert. Step 6: If your cladding carries on around a corner, follow Steps 1 through 5. Make sure the External Trim is in the right position, so as to place the Cladding Plank into the right position. 17

21 Exterior Wall Cladding Installation Horizontal Cladding Step 1: Fix the Starter Trim to the batten. The screw should be positioned in the centre of the slotted hole. Do not overtighten as this will restrict expansion and contraction. Step 2: Place the first plank in the Starter Trim ensuring the hole centres line up with the battens. Again, do not overtighten as this will restrict expansion and contraction. Repeat this process, checking the level before each plank is fixed. Step 3: Cut the external (Corner) trim as per the cutting guide. Place trim in position and mark on the battens to show where planks finish. Position Cladding approx. half way into recess. Fix using an 8G A4 Stainless Steel Pan Head Screw, 50mm in length. Push the trim insert into place Step 4: Cut the internal trim as per the cutting guide. Position the Internal Trim and mark on battens to show where planks will finish. Position cladding approx. half way into recess. Fix using an 8G A4 Stainless Steel Pan Head Screw, 50mm in length. Push the trim insert into place. Step 5: Cut the expansion trim as per the cutting guide. Place into position. Fix using an 8G A4 Stainless Steel Pan Head Screw, 50mm in length. Step 6: Cut a Finishing Trim to size by marking where cuts are needed. Mitering and buttjoining is acceptable. Mark batten centres and drill oversized holes (12mm) through top surface. Drill a 6mm hole and carbon burr to elongate hole. Fix the Trim through the second skin using 8G A4 Stainless Steel Pan Head Screw, 25mm in length. Insert plug and clean with chisel and sandpaper (40 grit abrasive). Fascia trims can be cut down to size to suit windows or door frames and these can be cut from our standard solid fascia board. 7 Step 7: Optional Soffit Detail: In instances where a soffit return is required, our unique starter trim can also be used as a soffit detail to create a neat finish. As each project circumstance will be different, please ensure that you contact us to check suitability prior to installation. Step 8: It is unlikely that cladding installed horizontally on the wall will terminate on a full width plank. If this is the case it maybe necessary to cut the last plank down in width. There are a range of options available, subject to individual site conditions. Please consult our detailed Technical Manual for more details on possible scenarios for finishing the last plank. 18

22 Exterior Wall Cladding Case Studies Green Park Eco-Offices Green Park is a 20 acre, mixed-use business park consisting of prime office, industrial and leisure space in Newport, East Yorkshire. Green Park provides local companies in East Yorkshire with modern and energy efficient business space in the right location benefits that are usually only reserved for large organisations. Type 150 Cedar Flush horizontally installed The developer behind the concept is the Horncastle Group who along with their architects, The Harris Partnership, selected Composite Timber Dura Cladding in Type 150 Cedar as the exterior wall covering in recognition of its low maintenance and environmentally friendly properties. Speaking about the project, Ian Hodges, managing director of Horncastle Group PLC said; The overarching concept behind the development was to ensure it was as architecturally attractive, environmentally friendly and sustainable as possible, and selecting Dura Cladding for the exterior Hopewood Park Hopewood Park is situated in Ryhope, Sunderland and provides a range of clinical services including assessment and treatment of mental health conditions and services for people who require intensive rehabilitation. The 50 million facility was designed by Medical Architecture and was inspired by Ryhope s river valley. The layout and design of Hopewood Park encapsulates the latest thinking and approaches to mental healthcare, creating a sympathetic and soothing recovery-centred environment both inside and out, with plenty of exposure to daylight. A calming range of textures and finishes in a restrained pallet of white, composite wood, grey and slate have been used both internally and externally, creating an outside is inside feeling to the buildings. To achieve the wood-effect finish Dura Cladding composite timber in Type 150 walls has played a significant role in helping us achieve that. The resulting buildings look great, are extremely energy efficient and all have Energy Performance Certificate ratings of A. Dura Cladding offered all of the key properties we were looking for in terms Cedar Flush was selected. This pretty and authentic wood-effect cladding offers greater longevity than traditional wood. The use of Dura Cladding also helps enhance the feeling of tranquillity and connection with the local landscape of its appearance, low-maintenance, environmental sustainability and long term durability, and was a great choice from our point of view. In fact, we re so delighted with the results that Horncastle Group recently relocated to Green Park Business Park to help establish a business community in this prime location. Type 150 Cedar Flush vertically installed whilst ensuring a low-maintenance finish that won t rot, fade or change colour over time. The product also offers fantastic green credentials it is made from 87% recycled content and can be supplied as FSC Certified. 19

23 Exterior Wall Cladding Colour Visualiser Our online cladding visualiser tool can help builders, contractors, developers and architects to picture the possibilities when it comes to composite timber cladding. The simple to use tool allows users to select from sample commercial and domestic projects which utilise both vertical and horizontal cladding in a range of designs. With one simple click of the mouse, clients can explore differing width options and a wide range of colours to suit a variety of project needs. Trial the Colour Visualiser now on our website at Type 150 Flush Cedar Type 150 Weatherboard Barn Black Type 200 Flush Teak Type 150 Flush Grey Type 250 Flush Cedar Type 150 Flush Type 150 Flush Charcoal 20

24 Solar Shading Cladding Dura Louvre Dura Louvre provides an aesthetic design solution to protecting a building against extreme solar influence, or to covering unsightly areas whilst still maintaining desirable daylight. Made of composite timber, Dura Louvre can help reduce the thermal heat in south-facing buildings as well as reducing energy costs by minimising air conditioning requirements. It can also be used effectively to screen pipework, utilities and other areas from view. Dura Louvre solar shading cladding can be integrated into new builds or added to existing properties and will transform the exterior of any building. Applications Features Benefits Solar Shading for Offices & Commercial Buildings Screening of Unsightly Areas Protective Wall Covering Ventilation New Finish for Existing Buildings UV Colour Stable Rot, Splinter, Warp Resistant Easy Installation Weather Resistant Fire Resistant FSC Certified Easy Handling No Painting And Staining No Specialist Skills Required 10 Year Warranty Looks Good Through Lifespan Eco Friendly Specifications Cladding Plank Plank Actual Plank Maximum Weight Profile Thickness Length Width Fixing Span l/m Type 140/40 Louvre 40mm 3600mm 140mm kg Dimensions R All measurements are in millimetres The composite timber fins can be fitted horizontally or vertically Dura Louvre Cladding combines style with a range of clever benefits such as privacy, weather protection, energy efficiency and ventilation. Dura Louvre Cladding is available in Cedar and Charcoal colours in 140/40mm profiles as standard. Other colours and profiles are available on request. 21

25 Solar Shading Cladding 22

26 Solar Shading Cladding Our composite louvres provide effective solar shading and the flexibility to create unique architectural designs Dura Louvre Cladding provides effective shade to glazed openings, preventing excessive glare and solar heat gain, but it also creates a striking architectural feature. Solar shading Dura Louvre panels can be integrated into new buildings or added to existing properties. Bespoke Screening & Ventilation Dura Louvre cladding can be used as visual screening in locations which are sheltered from adverse weather, or where rain penetration is acceptable. Made from low maintenance composite timber it is ideally suited for covering unsightly areas whilst still maintaining desirable daylight. Dura Louvre panel systems are popular with architects and designers for the effective screening of pipework, utilities and other areas from view and can bring a natural wood look to any building façade without any of the costly ongoing maintenance of wood. Dura Louvre can be used both to highlight a building s features and to help key areas to blend in with the overall design. If you re looking for a timber fin solution to conceal HVAC systems on the top of a building, our knowledgeable team and in-house CAD designers can help design a composite screen or façade that will stand the test of time. 23

27 Solar Shading Cladding Dura Louvre Bracket Options To fix Dura Louvre, a simple bracket sleeve is used to fasten the cladding to the substructure. The brackets are fixed to the substrate at set vertical or horizontal separations, and the Dura Louvre profiles are then fixed into the brackets. Various bracket sizes are available in both Cedar and Charcoal. Available dimensions and configurations are shown below: Dura Louvre Product Selector Louvre Range Type 140/40 Plank Strength STRONG Install Speed MEDIUM Vertical Louvre Recycled Content 87% Typical Applications Residential Projects Commercial Projects Solar Shading Offices Horizontal Louvre Colours Teak Charcoal Cedar Dimensions mm slots for steel or timber frame 11mm slot for blockwood/concrete All measurements are in millimetres 24

28 Composite Timber Pergolas Dura Pergolas Composite timber Dura Pergolas have a unique formula that provides the very best of both worlds, a long lasting material that is strong, durable and weathers extremely well. Composite timber Dura Pergolas are striking yet have traditional appearance, require little maintenance and will not splinter. The material is UV stabilised and above all eco-friendly with a 87% recycled material content. Applications Beach Areas Hotel Buildings Hotel Gardens Roof Gardens Theme Parks Villa Complexes Parking Areas Features No painting or staining UV resistant Colour stable Minimal maintenance Does not splinter Long life span Eco-friendly Benefits Hassle free Suitable for extreme climates Aesthetically pleasing Requires only basic cleaning Touch Safe Futureproof Solution with expected 25 year service life Specifications Product Width Length Height Weight (Kg) Slat Spans Type mm 3000mm 2960mm Type mm 3000mm 2960mm Type mm 3000mm 2960mm Type mm 4000mm 2960mm Type 844 (4 Post) 8000mm 4000mm 2960mm N/A 260 Type 846 (6 Post) 8000mm 4000mm 2960mm Type mm 9000mm 2960mm N/A 260 A classic pergola structure Sample Designs Type 99 Type 90 Type 43 Type Type Type 844 Type Dura Pergola on a veranda in Qatar All measurements are in millimetres 25

29 Composite Timber Pergolas Our Pergolas and other outdoor structures provide shade, protection from the elements, and a place for outdoor entertainment. Choose from one of our pre-designed Dura Pergola structures or let our expert team help create your bespoke pergola, gazebo or cabana design. Add shade and ambience with a Dura Pergola Dura Pergolas can completely transform the look of a deck or patio Pergolas can define space and add interest to an area Dura Pergolas in verandas at SEG Doha University Campus 26

30 Available now from Cladding Sole UK Timber Importer Grangemouth (Scotland) Sales Centre Tel: Fax: Trafford Park (Northern) Sales Centre Tel: Fax: Parkend (South West & Wales) Sales Centre Tel: Fax: Purfleet (London & South East) Sales Centre Tel: Fax: Head Office November 2016 Dura Composites Ltd Dura House, Telford Road Clacton On Sea Essex, CO15 4LP United Kingdom Tel: +44 (0) Fax: +44 (0) for the future Look for FSC certified products Industrial Rail Marine Decking Cladding Due to our policy of continual improvement we reserve the right to change specifications at all times without prior notice.