NEBRASKA CHAPTER LIBRARY. ACI LIBRARY CONTENTS OMAHA 4315 Cuming Street Omaha, NE Librarian Ben Ricceri (402)
|
|
|
- Karen Mathews
- 6 years ago
- Views:
Transcription
1 NEBRASKA CHAPTER LIBRARY ACI LIBRARY CONTENTS OMAHA 4315 Cuming Street Omaha, NE Librarian Ben Ricceri (402) CATEGORY I 2002 ACI MANUAL OF CONCRETE PRACTICE Part 1 Materials and general properties of Concrete Part 2 Construction practices and inspection of Pavements Part 3 Uses of concrete in buildings-design, Specifications and related topics Part 4 Bridges, Substructures, Sanitary and Other special structures Part 5 Masonry, Precast Concrete, Special Processes CATEGORY II BUILDING CODES AND DESIGN HANDBOOKS Reinforced Concrete ACI 318 (89) Plain Concrete ACI Masonry Designer s Guide ACI (92) ACI Detailing Manual (88) Design Handbook Vol. 2 (90) CATEGORY III RECENT COMMITTEE DOCUMENTS Cement and Concrete Terminology ACI-116 (90) Standard Tolerances for Concrete Construction and Materials ACI-117 (90) The Mercer Mile Building ACI-124.2R (94) Guide for Making a Condition Survey of Concrete in Service ACI-201.1R (92) Guide to Durable Concrete ACI-201.2R (92) Mass Concrete ACI-207.1R (96) Effect of Restraint, Volume Change, and Reinforcement on Cracking of Mass Concrete ACI-207.2R (95)
2 Practices for Evaluation of Concrete in Existing Massive Structures for Service Conditions ACI-207.3R (94) Cooling and Insulating Systems for Mass Concrete ACI-207.4R (93) Prediction of Creep, Shrinkage, and Temperature Effects in Concrete Structures ACI-209R (92) Erosion of Concrete in Hydraulic Structures ACI-210R (93) Compendium of Case Histories on Repair of Erosion- Damaged Concrete in Hydraulic Structures ACI-210.1R (94) Standard Practice for Selecting Proportions for Normal, Heavyweight, and Mass Concrete ACI (91) Standard Practice for Selecting Proportions for Structural Lightweight Concrete ACI (91) Standard Practice for Selecting Proportions for No Slump Concrete ACI (87) Guide for Selecting Proportions for High-Strength Concrete With Portland Cement and Fly Ash ACI-211.4R (93) Guide for Submittal of Concrete Proportions ACI-211.5R (96) Chemical Admixtures for Concrete ACI-212.3R (91) Guide for the Use of High-Range Water-Reducing Admixtures (Superplasticizers) in Concrete ACI-212.4R (93) Guide for Structural Lightweight Aggregate Concrete ACI-213R (89) Guide for Use of Normal Weight and Heavyweight Aggregates ACI-221R (96) Provisional Standard Test Method for Water-Soluble Chloride Available for Corrosion of Embedded Steel in Mortar and Concrete Using the Soxhiet Extractor ACI (96) Corrosion of Metals in Concrete ACI (89) Corrosion of Metals in Concrete ACI-222R (96) Standard Practice for use of Shrinkage-Compensating Concrete ACI-223 (93)
3 Control of Cracking in Concrete Structures ACI-224R (89) Causes, Evaluation and Repair of Cracks in Concrete Structures ACI-224.1R (93) Cracking of Concrete Members in Direct Tension ACI-224.2R (92) Ground Granulated Blast Furnace Slab as a Cementitious Constituent in Concrete ACI-226.1R (87) State-of-the-Art Report on Soil Cement ACI-230.1R (90) Use of Natural Pozzolans in Concrete ACI-232.1R (94) Guide for the Use of Silica Fume in Concrete ACI-234R (96) Specifications for Structural Concrete for Buildings ACI-301 (88) Guide for Concrete Floor and Slab Construction ACI-302.1R (96) Guide to Cast-In-Place Architectural Concrete Practice ACI-303R (91) Guide for Measuring, Mixing, Transporting and Placing Concrete ACI-304R (89) Guide for the Use of Preplaced Aggregate Concrete for Structural and Mass Concrete Applications ACI-304.1R (92) Heavyweight Concrete Measuring, Mixing, Transporting and Placing ACI-304.3R (96) Placing Concrete with Belt Conveyors ACI-304.4R (95) Batching, Mixing and Job Control of Lightweight Concrete ACI-304.5R (91) Hot Weather Concreting ACI-305R (91) Standard Specifications for Cold Weather Concrete ACI (90) Standard Practice for Design and Construction of Cast-In- Place Reinforced Concrete Chimneys ACI-307 (88) Standard Practice for Curing Concrete ACI-308) (92) Guide for Consolidation of Concrete ACI-309R (96)
4 Behavior of Fresh Concrete During Vibration ACI-309.1R (93) Guide to Consolidation of Concrete in Congested Areas ACI-309.3R (96) Standard Practice for Design and Construction of Concrete Silos and Stacking Tubes for Storing Granular Materials ACI-313 (91) ACI-313R (91) Building Code Requirements for Reinforced Concrete and Commentary ACI-318M (89) ACI-318RM (89) Building Code Requirements for Structural Plain Concrete and Commentary (METRIC) ACI-318.1M (89) ACI-183.1RM (89) Guide for Construction of Concrete Pavements and Concrete Bases ACI-325.9R (91) State-of-the-Art Report on Roller-Compacted Concrete Pavements ACI R (95) Standard Specification for Plain Concrete Parking Lots ACI (94) Concrete Shell Structures Practice and Commentary ACI-334.1R (92) Standard Specification for Construction of Drilled Piers ACI (94) Design and Construction of Drilled Piers ACI-336.3R (93) Design Handbook Volume III Two-Way Slabs ACI-340.4R (91) Seismic Analysis & Design of Concrete Bridge Systems ACI-341.2R (97) Analysis and Design of Reinforced Concrete Bridge Structures ACI-343R (88) Guide for Concrete Highway Bridge Deck Construction ACI-345R (92) Guide for Widening Highway Bridges ACI-345.2R (92) Specifications for Cast-in-Place Non-Reinforced Pipe ACI-346 (90) Environmental Engineering in Concrete Structures ACI-350R (89) Testing Reinforced Concrete Structures for Water Tightness ACI-350.1R (93) AWWA-400 (93)
5 Grouting for Support of Equipment and Machinery ACI-351.1R (93) Foundations for Static Equipment ACI-351.2R (94) State-of-the-Art Report on Anchorage to Concrete ACI-355.1R (91) State-of-the-Art Report on Barge Like Concrete Constructions ACI-357.2R (88) Guide for the Design of Durable Parking Structures ACI-362.1R (94) Guide for Evaluation of Concrete Structures Prior to Rehabilitation ACI-364.1R (94) Recommendations for Concrete Members Prestressed with Unbonded Tendons ACI-423.3R (96) Control of Deflection in Concrete Structures ACI-435R (95) State-of-the-Art Report on Controlof Two-Way Slab Deflections ACI-435.9R (91) Strength Evaluation of Existing Concrete Buildings ACI-437R (91) High-Strength Concrete Columns: State-of-the-Art ACI-441R (96) Response of Concrete Buildings to Lateral Forces ACI-442R (88) Fracture Mechanics of Concrete Concepts, Models and Determination of Material Properties ACI-446.1R (91) Finite Element Analysis of Fracture in Concrete Structures ACI-446.3R (97) Guide to Formwork for Concrete ACI-447R (94) Use of Epoxy Compounds with Concrete ACI-503R (93) Guide for the Application of Epoxy & Latex Adhesives for Bonding Freshly Mixed & Hardened Concrete ACI-503.6R (97) Standard Specification for Bonding Hardened Concrete, Steel, Wood, Brick and Other Materials to Hardened Concrete with a Multicomponent Epoxy Adhesive ACI (92) Guide for Shotcrete ACI-506R (90)
6 Guide to Certification of Shotcrete Nozzlemen ACI-506.3R (91) Building Code Requirements for Masonry Structures ACI/ASCE (88) Guide for Cast-in-Place Low-Density Concrete ACI-523.1R (92) Guide for Precast Cellular Concrete Floor, Reef & Wall Units ACI-523.2R (96) Guide for Cellular Concretes Above 50 PCF, and for Aggregate Concretes Above 50 PCF with Compressive Strengths Less Than 2500 PSI ACI-523.3R (93) Guide to Portland Cement Plastering ACI-524R (93) Building Code Requirements for Masonry Structures and Commentary ACI-530 (92) Specifications for Masonry Structures and Commentary ACI (92) Guide for Precast Concrete Wall Panels ACI-533R (93) Fiber Reinforced Concrete ACI-544.1R (96) Concrete Repair Guide ACI-546R (96) Guide for the Use of Polymers in Concrete ACI-548.1R (92) Guide for Mixing and Placing Sulfur Concrete in Construction ACI-548.2R (93) State-of-the-Art Report on Polymer-Modified Concrete ACI-548.3R (95) Standard Specification for Latex-Modified Concrete (LMC) Overlays ACI (93) Guide for Polymer Concrete Overlays ACI-548.5R (94) Guide for the Design, Construction, and Repair of Ferrocement ACI-549.1R (97) State-of-the-Art Report on Ferrocement ACI-549.1R (97) Design Recommendations for Precast Concrete Structures ACI-550R (93) Tilt-Up Concrete Structures ACI-551R (92)
7 CATEGORY IV SPECIAL PUBLICATIONS MANUAL OF CONCRETE INSPECTION SP-2 CEMENT AND CONCRETE TERMINOLOGY SP-14 SPECIFICATIONS FOR STRUCTURAL CONCRETE FOR BUILDINGS (FIELD EXPERIENCE MANUAL) SP-15 DESIGN HANDBOOK, VOLUME 2 COLUMNS SP-17A ACI DETAILING MANUAL SP-66 ACI STANDARDS IN ACI 301 AND 318 SP-71 ASTM STANDARDS IN ACI 301 AND 318 SP-71 COMPUTER USE FOR STATISTICAL ANALYSIS OF CONCRETE TEST DATA SP-101 CORROSION CONCRETE AND CHLORIDES SP-102 ANCHORAGE TO CONCRETE LOUIS TUTHILL SYMPOSIUM FIBER REINFORCED CONCRETE SP-103 SP-104 SP-105 PERMEABILITY OF CONCRETE SUPPORTED BEAMS AND SLABS, CONCRETE CRAFTSMAN SERIES 3 SP-108 CONCRETE IN MARINE ENVIRONMENT SP-109 HYPERBOLIC PARABOLOID SHELLS STATE-OF-THE- ART SP-110 SPECIFICATIONS FOR MASONRY STRUCTURES ASCE/ACI REFERENCE MANUAL SP-115 POLYMERS IN CONCRETE: APPLICATIONS TO CONCRETE SP-116 LONG TERM SERVICEABILITY OF CONCRETE STRUCTURES SP-117 FRACTURE MECHANICS: APPLICATIONS TO CONCRETE SP-118 SUPERPLASTICIZERS AND OTHER CHEMICAL ADMIXTURES IN CONCRETE SP-119 EXTERNAL PRESTRESSING IN BRIDGES SP-120
8 HIGH STRENGTH CONCRETE SP-121 PAUL KLIEGER SYMPOSIUM ON PERFORMANCE OF CONCRETE SP-122 DESIGN OF BEAM-COLUMN JOINTS FOR SEISMIX RESISTANCE SP-123 THIN-SECTION FIBER REINFORCED CONCRETE AND FERROCEMENT SP-124 LUNAR CONCRETE SP-125 DURABILITY OF CONCRETE SP-126 EARTHQUAKE-RESISTANT CONCRETE STRUCTURES INELASTIC RESPONSE AND DESIGN SP-127 EVALUATION AND REHABILITATION OF CONCRETE STRUCTURES AND INNOVATIONS IN DESIGN SP-128 COMPUTER ANALYSIS OF THE EFFECTS OF CREEIP, SHRINKAGE, AND TEMPERATURE CHANGES ON CONCRETE STRUCTURES SP-129 ANCHORS IN CONCRETE DESIGN AND BEHAVIOR SP-130 DURABILITY OF CONCRETE SP-131 FLY ASH, SILICA FUME, SLAG, AND NATURAL POZZOLANS IN CONCRETE SP-132 STRUCTURAL LIGHTWEIGHT AGGREGATE CONCRETE PERFORMANCE SP-136 POLYMER CONCRETE SP-137 FIBER-REINFORCED-PLASTIC REINFORCEMENT FOR CONCRETE STRUCTURES SP-138 DURABLE CONCRETE IN HOT CLIMATES SP-139 HIGH PERFORMANCE CONCRETE IN SEVERE ENVIRONMENTS SP-140 NEW CONCRETE TECHNOLOGLY FIBER REINFORCED CONCRETE SP-141 SP-142 EVALUATING CONCRETE PERFORMANCE SP-143 CONCRETE TECHNOLOGY PAST, PRESENT, AND FUTURE SP-144 DURABILITY OF CONCRETE SP-145
9 THIN REINFORCED CONCRETE PRODUCTS AND SYSTEMS SP-146 MASONRY IN THE AMERICAS SP-147 FOURTH CANMET/ACI INTERNATIONAL CONFERENCE ON SUPERPLASTICIZERS AND OTHER CHEMICAL ADMIXTURES IN CONCRETE SP-148 HIGH PERFORMANCE CONCRETE SP-149 CONTROLLED LOW-STRENGTH MATERIALS SP-150 CONCRETE BRIDGES IN AGGRESSIVE ENVIRONMENTS SP-151 DESIGN AND PERFORMANCE OF MAT FOUNDATIONS SP-152 FLY ASH, SILICA FUME, SLAG AND NATURAL POZZOLANS IN CONCRETE, VOLS. 1 & 2 SP-153 ADVANCES IN CONCRETE TECHNOLOGY SP-154 FOURTH WORLD CONGRESS ON JOINT SEALANTS AND BEARING SYSTEMS FOR CONCRETE STRUCTURES SP-164 REPAIR AND STRANGTHENING OF CONCRETE MEMBERS WITH ADHESIVE BONDED PLATES SP-165 PROPERTIES AND USES OF POLYMERS IN CONCRETE SP-166 HIGH-STRENGTH CONCRETE: AN INTERNATIONAL PROSPECTIVE SP-167 INNOVATIONS IN NONDESTRUCTIVE TESTING OF CONCRETE SP-168 IN-PLACE PERFORMANCE OF POLYMER CONCRETE OVERLAYS SP CANMET/ACI (Volume I) SP CANMET/ACI (Volume II) SP Third CANMET/ACI SP-171 High Performance Reinforced Concrete SP th International Conference SP-193 Creep and Shrinkage SP-194
10 Superplasticizers and other Chemical Admixtures In Concrete SP-195 Composite and Hybrid Systems SP-196 CATEGORY V MISCELLANEOUS ESTHETICS IN BRIDGE DESIGN MP-1 CONCRETE CRAFTSMAN SERIES 3 Concrete supported slabs and beams FORMWORK by M. K. Hurd COMPUTERIZED CONCRETE Q.C. USING SPREADSHEETS AND CUSTOM GRAPHS COMPILATION 13 COMPUTERS IN CONCRETE DESIGN COMPILATION 14 COMPUTERS IN CONCRETE CONSTRUCTION COMPILATION 15 QUALITY ASSURANCE IN CONCRETE CONSTRUCTION COMPILATION 16 SHOTCRETE COMPILATION 18 ELEVATED SLABS COMPILATION 21 DURABLE CONCRETE COMPILATION 24 CONCRETE DURABILITY, CORROSION PROTECTION COMPILATION 25 FORMWORK COMPILIATION 26 STEEL FIBER REINFORCED CONCRETE COMPILATION 27 SYNTHETIC AND OTHER NON-METALLIC FIBER REINFORCEMENT OF CONCRETE COMPILATION 28 FIBER REINFORCED PLASTIC REINFORCEMENT COMPILATION 33 BRIDGE DURABILITY AND PERFORMANCE COMPILATION 34 FLOORS AND SLABS COMPILATION 35 TESTING OF TRANSPORTATION CONCRETE: BRIDGES AND ROADS COMPILATION 36 SECRETS OF HOT AND COLD WEATHER CONCRETING SBM-2 (91) HOW TO DESIGN, REBUILD & MAINTAIN CONCRETE PARKING STRUCTURES SBM-3 (91)
11 CONCRETE FUNDAMENTALS CCS-0 * * * * * * * * * * * * * * * * * * * * LIBRARY CONTENTS LINCOLN 6000 Cornhusker Highway Lincoln, NE Librarian: Jereme Montgomery (402) CATEGORY I 2002 ACI MANUAL OF CONCRETE PRACTICE Part 1 Part 2 Part 3 Part 4 Part 5 Materials and general properties of concrete Construction Practices and Inspection; Pavements Use of concrete in buildings-design, specifications and related topics Bridges, Substructures, Sanitary and other special structures Masonry, Precast Concrete, Special Processes Part 6 CATEGORY II BUILDING CODE AND DESIGN HANDBOOKS Concrete Field Testing Technician Grade I CPI-88 ASTM Standards ACI 301 ASTM Standards ACI 318 Design and Control of Concrete Mixes, 13 th Edition CATEGORY III RECENT COMMITTEE Concrete Slabs on Grade SCM-25 (92) Corrosion of Metals in Concrete ACI 22R-89 Cement & Concrete Terminology ACI 116R-90 Standard Tolerances for Concrete Construction ACI Materials and Commentary ACI 117R-90 Guide for Obtaining Cores and Interpreting Compressive Strength Results
12 ACI 214.4R-03 Guide for Structural Lightweight-Aggregate Concrete ACI 215R-03 Corrosion of Metals in Concrete ACI 222R-89 Standard Practice for the use of shrinkage Compensating Concrete ACI Control of Cracking in Concrete Structures ACI 224R-89 Standard Practice for Selecting Proportions for Normal, Heavyweight, Mass Concrete ACI Control of Cracking in Concrete Structures ACI 224.R-89 Causes, Evaluation, and Repair of Cracks in Concrete Structures ACI 224.1R-89 Ground Granulated Blast Furnace Slab as a Cementitious Constituent in Concrete ACI 226.1R-87 In Place Methods to Estimate Concrete Strength ACI 228.1R-03 Field Reference Manual Specifications for Structural Concrete for Buildings ACI Field Reference Manual Specifications for Structural Concrete for Buildings ACI Guide for Concrete Floor and Slab Construction ACI 302.1R-89 Guide for Measuring, Mixing, Transporting, and Placing Concrete ACI 304R-89 Standard Specifications for Cold Weather Concreting ACI Building Code Requirements for Reinforced Concrete ACI Building Code Requirements for Reinforced Concrete ACI Commentary ACI Building Code Requirements for Reinforced Concrete ACI Commentary ACI
13 Building Code Requirements for Reinforced Concrete and Commentary (2) ACI /ACI 318R-89 Build Code Requirements for Reinforced Concrete ACI 318 M-89 Commentary ACI 318RM-89 Build Code Requirements for Reinforced Concrete ACI Commentary ACI 318R-95 Building Code Requirements for Structural Concrete with Design Applications ACI Notes on ACI Building Code Requirements for Structural Concrete ACI Standard Specification for the Construction of Drilled Piers ACI Environmental Engineering Concrete Structures ACI 350R-89 Use of Epoxy Compounds with Concrete ACI 350R-89 Design & Construction of Circular Wire and Strand Wrapped Prestressed Concrete Structures ACI 408R-03 Strength Evaluations of Existing Concrete Buildings ACI 437R-03 Use of Expoxy Compounds with Concrete ACI 503R-89 Guide to Shotcrete ACI 506R-90 Specifications for Materials Proportioning, and Application of ShotCrete ACI ASCE 6-88 Specifications for Masonry Structures ACI CATEGORY IV SPECIAL PUBLICATIIONS Specifications for Structural Concrete for Buildings with Selected ACI & ASTM References (2) ACI SP-15 (89) Fracture Mechanics: Application to Concrete ACI SP-18
14 Concrete Durability Katherine and Bryant Mather, ACI International Conference, Volume 1 ACI SP-100 Corrosion, Concrete and Chlorides ACI SP-102 Corrosion, Concrete, and Chlorides Steel Corrosion in Concrete: Causes & Restraints Editor: Francis W. Gibson Copyright 1987 Examples for the Design of Structural Concrete With Strutand-Tie Models 2002 Fly Ash, Silica Fume, Slag & Natural Pozzolans in Concrete 4 th International Conference 1992 Innovations in Fiber-Reinforced Concrete for Value 2003 Fly Ash, Silica Fume, Slag & other Mineral By-Products in Concrete Volumes I & II Durability of Concrete Volume I 1991 ACI Certification Concrete Field Testing Technician Grade 1 Esthetics in Concrete Bridge Design 1990 External Prestressing in Bridges 1990 Silica Fume Users Manual CD Silica Fume Users Manual April 2005 Concrete Pipe Design Manual 1985 Troubleshooting Concrete Construction Seminar Course Manual 1994 Performance of Concrete Segmental and Cable-Stayed Bridges in Europe CATEGORY V MISCELLANEOUS Superplasticizers and other Chemical Admixtures in Concrete, Third International Superplasticizers and other Chemical Admixtures in Concrete Volume II Evaluation & Rehabilitation of Concrete Structures and Innovations in Design Volume II Paul Klieger Symposium on Performance of Concrete 1990 Conference in Ottawa, Canada 1980
15 2003 International Conference Seventh Canmet/ACI Field Applications of FRP Reinforcement Case Studies Concrete Masonry Standards American Society for Testing and Materials Standard Specifications & Test Methods Concrete Craftsman Series Slabs on Grade Series 2- Cast-in-Place Walls Series 3 Supported Beams and Slabs Formwork for Concrete M. K. Hurd, 5 th Edition 10 Copies ACI 1991 Publications Current and back issues of the following Periodicals: ACI Concrete International ACI Structure Journal Masonry Construction Concrete Construction Collection of NRMCA TEC Sheets
SECTION CAST-IN-PLACE CONCRETE FOR UTILITIES
FOR UTILITIES PART 1 - GENERAL 1.1 SECTION INCLUDES A. Cast-in-place concrete for tunnel walls and slabs; steam manholes, chases, precast items and other miscellaneous structures; control, expansion and
fib publications - Pr.November 2017:
fib publications - Pr.November 2017: No. 79. Fibre-reinforced concrete: From design to structural applications. FRC 2014: ACI-fib International Workshop Proceedings - ACI SP-310 (480 pages, ISBN 978-2-88394-119-9,
Fundamentals of Concrete
Components Cement Water Fine Aggregate Coarse Aggregate Fundamentals of Range in Proportions Advantages of Reducing Water Content: Increased strength Lower permeability Fundamentals of Increased resistance
SECTION CAST IN PLACE CONCRETE FOR FLOOR SLABS ON GRADE THAT WILL RECEIVE SEMI-PERMEABLE OR IMPERMEABLE FLOOR FINISHES
GUIDE SPECIFICATION SECTION CAST IN PLACE CONCRETE FOR FLOOR SLABS ON GRADE THAT WILL RECEIVE SEMI-PERMEABLE OR IMPERMEABLE FLOOR FINISHES PART 1 - SCOPE 1.01 WORK INCLUDED: 1.1.1 This guide covers the
DIVISION 03 CONCRETE CONCRETE Maintenance of Concrete
DIVISION 03 CONCRETE 03 00 00 CONCRETE 03 01 00 Maintenance of Concrete 03 01 10 Maintenance of Concrete Forming and Accessories 03 01 20 Maintenance of Concrete Reinforcing 03 01 23 Maintenance of Stressing
September 1, 2003 CONCRETE MANUAL SPECIAL TYPES OF CONCRETE
September 1, 2003 CONCRETE MANUAL 5-694.800 5-694.810 GENERAL SPECIAL TYPES OF CONCRETE 5-694.800 In the general use of the word concrete, the idea implied is the conventional placement of the material
PIP STS03001 Plain and Reinforced Concrete Specification
May 2017 Structural PIP STS03001 Plain and Reinforced Concrete Specification PURPOSE AND USE OF PROCESS INDUSTRY PRACTICES In an effort to minimize the cost of process industry facilities, this Practice
THE ADVANCES AND BARRIERS IN APPLICATION OF NEW CONCRETE TECHNOLOGY
25 THE ADVANCES AND BARRIERS IN APPLICATION OF NEW CONCRETE TECHNOLOGY Suneel N. Vanikar Federal Highway Administration, U.S. Department of Transportation, Washington, DC, USA Abstract Numerous advances
SECTION STRUCTURAL PRECAST CONCRETE
SECTION 03500 STRUCTURAL PRECAST CONCRETE PART 1 GENERAL 1.01 SUMMARY A. Section Includes. This section covers Prestressed or Precast concrete member construction, including product design not shown on
B BASF MasterFlow MasterFlow MasterFlow MasterFlow C CGM Grout...8
B BASF MasterFlow 100...2 MasterFlow 648...5 MasterFlow 885...4 MasterFlow 928...3 C CGM...8 F FIVE STAR GROUT...7 G GROUT Five Star Non Shrink...7 General Purpose...6 Masterflow 100...2 Masterflow 648...5
***************************************************************************************************************
03450 ARCHITECTURAL PRECAST CONCRETE *************************************************************************************************************** SPECIFIER: CSI MasterFormat 2004 number 03 45 13 ***************************************************************************************************************
Structural Tests and Special Inspections Form. Inspection of Fabricators (1704.2)
Inspection of Fabricators (1704.2) Furnish inspection reports (1704.2.1) - Fabricators that have not been approved Provide a Certificate of Compliance (1704.2.2) - Approved Fabricators Steel Construction
COMPLETE REVISION May Process Industry Practices Structural. PIP STS03001 Plain and Reinforced Concrete Specification
Structural PURPOSE AND USE OF PROCESS INDUSTRY PRACTICES In an effort to minimize the cost of process industry facilities, this Practice has been prepared from the technical requirements in the existing
1. Cast-in-place concrete is specified in Section
SECTION 03 38 00 PART 1 - GENERAL 1.01 DESCRIPTION A. This Section describes the requirements for furnishing and installing post-tensioned slabs, jacks, jacking and anchors at Parking Structure, and record
The Hashemite University Department of Civil Engineering. Dr. Hazim Dwairi. Dr. Hazim Dwairi 1
Department of Civil Engineering Lecture 2.1 Methods of Prestressing Advantages of Prestressing Section remains uncracked under service loads Reduction of steel corrosion (increase durability) Full section
Course Concrete Technology Course Code Theory Term Work POE Total Max. Marks Contact Hours/ week
Course Concrete Technology Course Code 43588 Examination Scheme Theory Term Work POE Total Max. Marks 100 50 -- 150 Contact Hours/ week 3 2 -- 5 Prepared by Mr. C.S. Patil / Mr. S.P. Patil Date Prerequisites
SECTION ARCHITECTURAL CAST STONE
PART 1 - GENERAL 1.1 RELATED DOCUMENTS SECTION 047200 ARCHITECTURAL CAST STONE A. RELATED DRAWINGS All drawings, to include supplemental drawings, instructions and conditions of this contract. B. RELATED
Code Requirements for Nuclear Safety-Related Concrete Structures (ACI ) and Commentary An ACI Standard
ACI 349-06 Code Requirements for Nuclear Safety-Related Concrete Structures (ACI 349-06) and Commentary An ACI Standard Reported by ACI Committee 349 Ronald J. Janowiak Chair Hansraj G. Ashar Partha S.
SECTION RIGID PAVEMENT. 1. Portland Cement Concrete (PCC) pavement. 2. Section Aggregate Base Course.
SECTION 02750 RIGID PAVEMENT PART 1 GENERAL 1.1 SUMMARY A. Section Includes: 1. Portland Cement Concrete (PCC) pavement. B. Related Sections: 1.2 REFERENCES 1. Section 02315 Excavation. 2. Section 02721
Guide to Improving Specifications for Ready Mixed Concrete
NRMCA Publication 2PE004 Guide to Improving Specifications for Ready Mixed Concrete 2015 National Ready Mixed Concrete Association All rights reserved NRMCA Publication 2PE004 Guide to Improving Specifications
Introductory Chapter
Introductory Chapter Asian Concrete Model Code 2014, Introductory Chapter TABLE OF CONTENTS DEFINITIONS...3 1 INTRODUCTION... 8 1.1 SCOPE... 8 1.2 DOCUMENT ORGANISATION... 8 1.3 GENERAL PRINCIPLES... 8
Investigation and Comparative Study of Effect of Silica Fume in Cementitious Grouts
International Journal of Scientific and Research Publications, Volume 5, Issue 5, May 2015 1 Investigation and Comparative Study of Effect of Silica Fume in Cementitious Grouts Dr. Shrikrishna A.Dhale
Handbook for Concrete and Cement Table of Contents Issued 1 September 1997 (updated December 2002)
Handbook for Concrete and Cement Table of Contents Issued 1 September 1997 (updated December 2002) Standards and Specifications that are dual CRD-C and ASTM or ACI may be obtained from those organizations.
MnDOT s Experience With High Performance Concrete Bridge Decks & Reinforcement
2017 Minnesota Concrete Council MnDOT s Experience With High Performance Concrete Bridge Decks & Reinforcement Ed Lutgen Bridge Construction & Maintenance Engineer Minnesota Department of Transportation
ULTRA-HIGH STRENGTH SHEAR KEY GROUT
ULTRA-HIGH STRENGTH SHEAR KEY GROUT 187 April 30, 2015 SPECIFICATION FOR ULTRA-HIGH STRENGTH SHEAR KEY GROUT SCOPE This specification consists of the proper material selection and production of Ultra-High-
VDOT s New High Performance Concrete Specifications
VDOT s New High Performance Concrete Specifications Celik Ozyildirim, Ph.D., P.E. A partnership of the Virginia Department of Transportation and the University of Virginia since 1948 3/4/2010 1 HPC in
MICHIGAN CONCRETE ASSOCIATION GUIDE FOR COLD WEATHER CONCRETING
MICHIGAN CONCRETE ASSOCIATION GUIDE FOR COLD WEATHER CONCRETING MCA:SMW 1 of 6 10-25-11 For the purposes of this document and the MCA Special Provision for Cold Weather Concreting, cold weather is determined
FINAL REPORT EVALUATION OF HYDRAULIC CEMENT CONCRETE OVERLAYS PLACED ON THREE PAVEMENTS IN VIRGINIA. Michael M. Sprinkel, P.E.
FINAL REPORT EVALUATION OF HYDRAULIC CEMENT CONCRETE OVERLAYS PLACED ON THREE PAVEMENTS IN VIRGINIA Michael M. Sprinkel, P.E. Research Manager Celik Ozyildirim, Ph.D. Principal Research Scientist (The
NRMCA is working on. Experimental Case Study Demonstrates Advantages of Performance Specifications
Experimental Case Study Demonstrates Advantages of Performance Specifications By Karthik Obla, Director of Research and Materials Engineering Fernando Rodriguez, Laboratory Manager and Soliman Ben Barka,
MANUAL OF INSTRUCTIONS MATERIALS DIVISION COMMONWEALTH OF VIRGINIA DEPARTMENT OF TRANSPORTATION
MANUAL OF INSTRUCTIONS MATERIALS DIVISION COMMONWEALTH OF VIRGINIA DEPARTMENT OF TRANSPORTATION TABLE OF CONTENTS Chapter I - GENERAL INSTRUCTIONS...1 SECTION 101 PURPOSE AND SCOPE OF MANUAL...1 SECTION
Fiber Reinforced Concrete (FRC)
Progress in Fiber Reinforced Concrete (FRC) Concrete is relatively brittle, and its tensile strength is typically only about one tenths of its compressive strength. Regular concrete is therefore normally
I-64 DUNLAP CREEK BRIDGE REHABILITATION JOINTLESS BRIDGES, DECK OVERLAYS, AND CONCRETE MATERIALS
I-64 DUNLAP CREEK BRIDGE REHABILITATION JOINTLESS BRIDGES, DECK OVERLAYS, AND CONCRETE MATERIALS June 8, 2016 Celik Ozyildirim, PhD, PE, Principal Research Scientist, VTRC, Charlottesville, VA Rex Pearce,
***************************************************************************************************************
03365 POST-TENSIONED CONCRETE *************************************************************************************************************** SPECIFIER: CSI MasterFormat 2004 number 03 38 00. ***************************************************************************************************************
SECTION PRECAST STRUCTURAL PRETENSIONED CONCRETE
PART 1 - GENERAL 1.1 DESCRIPTION: SECTION 03 41 33 PRECAST STRUCTURAL PRETENSIONED CONCRETE SPEC WRITER NOTE: Delete between //--// if not applicable to project. Also delete any other item or paragraph
Contents. 1.1 Introduction 1
Contents PREFACE 1 ANCIENT MASONRY 1 1.1 Introduction 1 1.2 History of Masonry Materials 1 1.2.1 Stone 2 1.2.2 Clay Units 2 1.2.3 Calcium Silicate Units 4 1.2.4 Concrete Masonry Units 4 1.2.5 Mortars 5
3/5/2014. Disclaimer and Waiver of Liability. Portland Cement Association. Learning Objectives. Why do concrete problems occur?
Disclaimer and Waiver of Liability T-20 Troubleshooting Concrete Mix Designs and Specifications Michelle L. Wilson, FACI Director, Education Portland Cement Association www.cement.org Tuesday, March 4,
SECTION CONCRETE. B. ACI 318 Building Code Requirements for Structural Concrete and Commentary
SECTION 03300 CONCRETE PART 1 GENERAL 1.01 SCOPE OF WORK Concrete foundation walls, sanitary structures, pipe encasements, thrust blocking and slabs on grade. 1.02 REFERENCES A. ACI 301 Specification for
This paper presents the results of a case study
Case Study The Use of Slag Cement, Alkali-Free Accelerator, and Macro-Synthetic Fibers in Wet-Mix Shotcrete for Tunnel Applications By Ezgi Yurdakul, Klaus-Alexander Rieder, Niki Jackson, Mick Pawelski,
Appendix F. Checklist for Concrete Pre-Construction Conference. Best Practices Guidelines for Concrete Construction
Appendix F Checklist for Concrete Pre-Construction Conference 45 Introduction Pre-construction meetings are of prime importance in planning concrete construction work because many potential problems can
GUIDE SPECIFICATIONS For STRUCTURAL PRECAST HOLLOW CORE SLABS SECTION 03410
GUIDE SPECIFICATIONS For STRUCTURAL PRECAST HOLLOW CORE SLABS SECTION 03410 Note to user: These guide specifications are provided by Mid- States Concrete Products as a service to you; they are NOT specific
Frequently Asked Questions (FAQ s) about Concrete Driveways
Frequently Asked Questions (FAQ s) about Concrete Driveways What type of concrete mix should be used? Your local ready mix producer and your contractor will assist you in ensuring the proper concrete mix
Properties of Concrete. Properties of Concrete. Properties of Concrete. Properties of Concrete. Properties of Concrete. Properties of Concrete
CIVL 1112 Contrete Introduction from CIVL 1101 1/10 Concrete is an artificial conglomerate stone made essentially of Portland cement, water, and aggregates. While cement in one form or another has been
HIGH PERFORMANCE CONCRETE - HPC
HIGH PERFORMANCE CONCRETE - HPC Fahim Al-Neshawy & Esko Sistonen 23.10.2015 Outlines Introduction Materials used in HPC Methods used for making HPC HPC - mix design Properties of HPC Advantages and disadvantages
Microsilica in Concrete
Microsilica in Concrete Henan Superior Abrasives I/E Co., Ltd Microsilica is a byproduct from silicon metal or ferrosilicon industries, where these metals are produced in submerged electric arc furnaces.
10/10/2007. Is it Dark at Night?
To Crack or Not to Crack? That is the Question Causes and Prevention Presented by: Dave Frentress Does Concrete Crack? Is it Dark at Night? Cracking A recent NRMCA survey identified cracking as the number
STRUCTURAL MASONRY SPECIAL INSPECTOR. Study Guide
STRUCTURAL MASONRY SPECIAL INSPECTOR Study Guide May 2017 Examination: The Structural Masonry Inspector Examination is based on the references cited in this document. It is 3 hours in length, is an open-book
Tolerances- Section
Tolerances- Section 346-6.4 Do not add water to delivered concrete when it is within the target Range for slump 1 346-6.4 Tolerances: Meet the following tolerances from target values for plastic concrete
Overlays. HCC Deck Overlays. Key Decisions for Concrete Deck Overlays
Key Decisions for Concrete Deck Overlays Virginia Concrete Conference March 7, 2007 Michael Sprinkel, P.E. Associate Director Virginia Transportation Research Council Overlays Overlays are usually placed
A BRIEF STATE-OF-THE-ART REVIEW OF PNEUMATICALLY APPLIED CONCRETE OR MORTAR (SHOTCRETE)
183 A BRIEF STATE-OF-THE-ART REVIEW OF PNEUMATICALLY APPLIED CONCRETE OR MORTAR (SHOTCRETE) Marvin H. Hilt()n Senior Research Scientist Virginia Transportati()n Research C()uncil (A Co()perative Organizati()n
A. ASTM C 150 Standard Specification for Portland Cement. B. ASTM C 595 Standard Specification for Blended Hydraulic Cements.
TECHNICAL SPECIFICATIONS SEWER MANHOLE REHABILITATION SYSTEM WITH A PROTECTIVE CEMENT LINER AND HIGH BUILD EPOXY COATING (As Provided by Standard Cement Materials) FOREWORD The following specification
SPECIFICATIONS PRECAST PRESTRESSED CONCRETE PART 1 GENERAL 1.6.2.5 Openings, inserts and related reinforcement 1.6.3 Each drawing submitted to bear stamp of 1.1 Related Work qualified Professional Engineer
NTPEP Evaluation of Epoxy and Resin Based Adhesive Bonding Systems.
Standard Practice for NTPEP Evaluation of Epoxy and Resin Based Adhesive Bonding Systems. AASHTO Designation: [Number] American Association of State Highway and Transportation Officials 444 North Capitol
PART 1 - GENERAL. Section Cast-in-Place Concrete 1.3 REFERENCES
CSI SECTION 32 13 13 CONCRETE PAVING 32 01 26 RIGID PAVING REHABILITATION DOT APPROVED PRODUCTS LIST OR SPECIAL PROVISIONS Very Early High Strength, Low Shrinkage, Powder Polymer-Modified Concrete Overlay
KANSAS DEPARTMENT OF TRANSPORTATION SPECIAL PROVISION TO THE STANDARD SPECIFICATIONS, EDITION 2007
Sheet 1 of 6 KANSAS DEPARTMENT OF TRANSPORTATION SPECIAL PROVISION TO THE STANDARD SPECIFICATIONS, EDITION 2007 Delete SECTION 2501 and replace with the following: SECTION 2501 PART V 2501.1 GENERAL In
Statement of Special Inspections Michigan Building Code 2012 (MBC 2012)
Gaines Charter Township 8555 Kalamazoo Ave SE Caledonia MI 49316 PH: 616 698-6640 Fax: 616 698-2490 www.gainestownship.org Building Department Statement of Special Inspections Michigan Building Code 2012
CIVIL BREADTH Exam Specifications
NCEES Principles and Practice of Engineering Examination CIVIL BREADTH and STRUCTURAL DEPTH Exam Specifications Effective Beginning with the April 2015 Examinations The civil exam is a breadth and depth
Cyclic behaviour of RC beams using SIFCON Sections
Cyclic behaviour of RC beams using SIFCON Sections Pradeep.T 1, Sharmila.S 2 Assistant Professor, Dept. of Civil Engineering, Kongu Engineering College, Perundurai, Tamil Nadu,India 1 Assistant Professor,
Fly Ash, Slag, Silica Fume, and Natural Pozzolans
Silica Fume, and Fly Ash, Slag, Silica Fume, and Also known as Supplementary Cementing Materials (SCMs) a material that, when used in conjunction with portland cement, contributes to the properties of
MATERIAL SPECIFICATION FOR CONCRETE - MATERIALS AND PRODUCTION
ONTARIO PROVINCIAL STANDARD SPECIFICATION METRIC OPSS.MUNI 1350 NOVEMBER 2008 MATERIAL SPECIFICATION FOR CONCRETE - MATERIALS AND PRODUCTION TABLE OF CONTENTS 1350.01 SCOPE 1350.02 REFERENCES 1350.03 DEFINITIONS
A Study on Mechanical Properties of Sisal Fiber Reinforced Concrete
A Study on Mechanical Properties of Sisal Fiber Reinforced Concrete 1. INTRODUCTION 1.1 GENERAL Durability of a material is defined as the Mr.S.Sabarinathan 1 service life of a material under given environmental
.1 Formwork for cast-in-place concrete with shoring, bracing, and anchorage.
03 10 00 CONCRETE FORMING AND ACCESSORIES Page 1 of 4 1 General 1.1 SECTION INCLUDES.1 Formwork for cast-in-place concrete with shoring, bracing, and anchorage..2 Form accessories..3 Form stripping. 1.2
Mass concrete placements often require significant
A Low Temperature Rise Mixture for Mass Fly ash-based hydraulic cement generates significantly less heat than portland cement by John Gajda, Michael Weber, and Ivan Diaz-Loya Mass placements often require
CTIOA Field Report
CERAMIC TILE INSTITUTE OF AMERICA, INC. 12061 Jefferson Blvd., Culver City, CA 90230-6219 CTIOA Field Report 84-2-2 SUBJECT: WORKING WITH PORTLAND CEMENT CONCRETE I. INTRODUCTION A. Concrete, like many
POZZOLANIC CEMENT Fly ash based (CEM IV/B-V 32,5N) Properties & Applications
PROPERTIES & APPLICATIONS POZZOLANIC PAGE 1 OF 7 Uniclass L621 CI/SfB March 2014 Yq2 POZZOLANIC CEMENT Fly ash based (CEM IV/B-V 32,5N) Properties & Applications PROPERTIES & APPLICATIONS CEMENT PROPERTIES
WHAT IS PRECAST/PRESTRESSED CONCRETE?
PRODUCT LOAD TABLES 1 WHAT IS PRECAST/PRESTRESSED CONCRETE? PRECAST/PRESTRESSED CONCRETE is an architectural and structural material possessing great strength. Specifically, PRESTRESSED CONCRETE has unique
CC038 Design, Inspection, Repair and Maintenance of Concrete Structure in Petrochemical Plants
CC038 Design, Inspection, Repair and Maintenance of Concrete Structure in Petrochemical Plants H.H. Sheik Sultan Tower (0) Floor Corniche Street Abu Dhabi U.A.E www.ictd.ae ictd@ictd.ae Course Introduction:
LAFARGE. Tercem 3000 Blended Hydraulic Cement. Provides flexibility in concrete proportioning to assist in achieving: Higher Ultimate Strength
LAFARGE Blended Hydraulic Cement Provides flexibility in concrete proportioning to assist in achieving: Higher Ultimate Strength Improved Durability Reduced Permeability Improved Rheology Better Finishability
CONCRETE CHAPTER 19. Italics are used for text within Sections 1903 through 1908 of this code to indicate provisions that differ from ACI 318.
CHAPTER 19 CONCRETE Italics are used for text within Sections 1903 through 1908 of this code to indicate provisions that differ from ACI 318. SECTION 1901 GENERAL 1901.1 Scope. The provisions of this chapter
TECHNICAL SPECIAL PROVISION FOR CONCRETE REPAIRS. Financial Project ID , &
TECHNICAL SPECIAL PROVISION FOR CONCRETE REPAIRS Financial Project ID 429140-1-52-01, 429140-2-52-01 & 428267-1-52-01 The official record of this Technical Special Provision is the electronic file signed
Title. Author(s)A.S.M. ABDUL AWAL; SHAHRIN MOHAMMAD; DIANAH MAZLAN. Issue Date Doc URL. Type. Note. File Information
Title THE ROLE OF EXPANDING ADMIXTURE IN THE DEVELOPMENT O CONCRETE Author(s)A.S.M. ABDUL AWAL; SHAHRIN MOHAMMAD; DIANAH MAZLAN Issue Date 2013-09-12 Doc URL http://hdl.handle.net/2115/54364 Type proceedings
Design Reference Sample: Sample of approved precast structural concrete color, finish, and texture, preapproved by Architect.
SECTION 034100 - PART 1 - GENERAL 1 RELATED DOCUMENTS Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification Sections, apply to this
Statement of Special Inspections
Statement of Special Inspections Statement Date: Project Name: Building Permit Number: Project Address: Design Professional in Responsible Charge (DPIRC): The following information is being submitted in
Washoe County PLAN SUBMITTAL
Washoe County PLAN SUBMITTAL Washoe County PLAN SUBMITTAL SPECIAL INSPECTION AND TESTING AGREEMENTS SEPTEMBER 2013 Washoe County Permits Plus Zone 1001 East Ninth Street PO Bo 11130 Reno, NV 89520-0027
Introduction of a Japan Concrete Institute Guideline: Practical Guideline for Investigation, Repair and Strengthening of Cracked Concrete Structures
Journal of Civil Engineering and Architecture 9 (2015) 213-224 doi: 10.17265/1934-7359/2015.02.010 D DAVID PUBLISHING Introduction of a Japan Concrete Institute Guideline: Practical Guideline for Investigation,
Applications of sustainable post-tensioned concrete slabs
Innov. Infrastruct. Solut. (2017) 2:42 DOI 10.1007/s41062-017-0075-6 TECHNICAL PAPER Applications of sustainable post-tensioned concrete slabs Amr A. Abdelrahman 1 Received: 4 May 2017 / Accepted: 2 June
CHAPTER 19 CONCRETE. Italics are used for text within Sections 1903 through 1905 of this code to indicate provisions that differ from ACI 318.
CHAPTER 19 CONCRETE Italics are used for text within Sections 1903 through 1905 of this code to indicate provisions that differ from ACI 318. SECTION 1901 GENERAL 1901.1 Scope. The provisions of this chapter
O U T L I N E C O N S T R U C T I O N M A T E R I A L S C O M P O S I T E C O M P O S I T E. Introduction & History
O U T L I N E Introduction & History C O N S T R U C T I O N M A T E R I A L S FIBER-REINFORCED COMPOSITES 2010 Praveen Chompreda, Mahidol University Fiber-Reinforced Polymer (FRP) Fibers and Matrices
SECTION (03410) - PRECAST STRUCTURAL CONCRETE
SECTION 03 45 00 (03410) - PRECAST STRUCTURAL CONCRETE PART 1 GENERAL 1.01 SUMMARY A. Section Includes: 1. Plant-Precast Structural Concrete Units, Including the Following: a. Hollow-Core Slab Units b.
Properties of polypropylene fiber reinforced silica fume expansive-cement concrete
Construction and Building Materials 13 1999 171 177 Properties of polypropylene fiber reinforced silica fume expansive-cement concrete Houssam A. Toutanji Department of Ci il and En ironmental Engineering,
Madewell Products Corporation December Industrial Court Alpharetta, GA Office: (770) Fax: (770)
Madewell Products Corporation December 2014 7561 Industrial Court Alpharetta, GA 30004 Office: (770) 475-8199 Fax: (770) 475-8167 Product Guide Specification SECTION 03935 RESTORATION MORTAR AND EPOXY
Section 708. PRESTRESSED CONCRETE BEAMS Description. Manufacture and erect prestressed concrete beams.
708.0 Section 708. PRESTRESSED CONCRETE BEAMS 708.0 Description. Manufacture and erect prestressed concrete beams. 708.02 Materials. Use materials meeting the following. Mortar and Grout... 702 Cement...
Admixtures. Lecture No. 12
Admixtures Lecture No. 12 Artificial Pozzolans Fly ash Blast Furnace Slag Silica Fume Rice Husk ash Metakaoline Surkhi. Fly Ash Fly ash is finely divided residue resulting from the combustion of powdered
mortarless Design Manual Part 1 (AS 3600:2009) Section 1 Page 1 AS 3600:2009 PLAIN AND REINFORCED CONCRETE - CODE OF PRACTICE
SECTION 1. mortarless Design Manual Part 1 (AS 3600:2009) Section 1 Page 1 AS 3600:2009 PLAIN AND REINFORCED CONCRETE - CODE OF PRACTICE 1.1 Overview of AS 3600:2009 AS 3600:2009 is the latest Australian
[AMN02] Durability of ferro cement structures in aggressive environment by laboratory tests
![[AMN02] Durability of ferro cement structures in aggressive environment by laboratory tests](/thumbs/78/78267709.jpg "[AMN02] Durability of ferro cement structures in aggressive environment by laboratory tests")
[AMN02] Durability of ferro cement structures in aggressive environment by laboratory tests Faizal Md Hanafiah, Mahyuddin Ramli, Nik Fuaad Bin Nik Abllah School Of Housing, Building And Planning, University
INNOVATIVE HYBRID WEARING SURFACES FOR FRP BRIDGE DECKS
16 TH INTERNATIONAL CONFERENCE ON COMPOSITE MATERIALS INNOVATIVE HYBRID WEARING SURFACES FOR FRP BRIDGE DECKS Riyad S. Aboutaha Syracuse University Keywords: FRP decks, bridge decks, wearing surfaces Abstract
A. Coordinate concrete unit masonry (also termed CMU and block ) work with work before and after, especially:
04222 CONCRETE UNIT MASONRY (UNREINFORCED ONLY) SPECIFIER: Use this section only for UNREINFORCED concrete masonry. Its only reinforcement is in the horizontal joints. It covers ONLY plain blockwork (no
A Study on the Influence of Mineral Admixtures in Cementitious System Containing Chemical Admixtures
International Journal of Engineering Research and Development e-issn: 2278-067X, p-issn: 2278-800X, www.ijerd.com Volume 10, Issue 3 (March 2014), PP.76-82 A Study on the Influence of Mineral Admixtures
Characteristics of KURALON TM (PVA fiber)
Characteristics of KURALON TM (PVA fiber) 1. Chemical Structure CH 2 CH CH 2 CH m n OH OCOCH 3 2. Characteristics High tenacity, High modulus, Low elongation, Light weight, Good resistance against chemicals
***************************************************************************************************************
03410 STRUCTURAL PRECAST CONCRETE *************************************************************************************************************** SPECIFIER: CSI MasterFormat 2004 number 03 41 00 ***************************************************************************************************************
Bridge Engineering/Construction Ultra High Performance Concrete (UHPC)
Bridge Engineering/Construction Ultra High Performance Concrete (UHPC) Ductal UHPC Paul White, PE, P. Eng. Bridge Engineering Manager, UHPC/Ductal U.S. LafargeHolcim October, 2016 UHPC Premix/Constituents
Environmental Engineering Concrete Structures - Introduction. William A. Wallace, P.E., SECB
Environmental Engineering Concrete Structures - Introduction William A. Wallace, P.E., SECB Topics Define environmental concrete structure Pictorial examples Historical stroll down memory lane (NRCS based)
VIRGINIA S EXPERIENCE WITH HPC FOR BRIDGES. Outline HPC. Celik Ozyildirim, Ph.D., P.E. Virginia Transportation Research Council VDOT
VIRGINIA S EXPERIENCE WITH HPC FOR BRIDGES Celik Ozyildirim, Ph.D., P.E. Virginia Transportation Research Council VDOT Virginia Concrete Conference, March 7, 2007 Outline HPC Field applications Lessons
By CTS Cement Manufacturing Corp.
CSI SECTION 03 60 00 GROUTING 03 62 00 NON-SHRINK GROUTING 03 62 13 NON-METALLIC NON-SHRINK GROUTING High Flow, Non-Metallic, Multi-Purpose, Cementitious, Non-Shrink Grout EDITOR NOTE: The following guideline
Project Address: Name of Person Completing Form:
Statement of Inspections This form is provided as a way to list aspects of the project that require special inspection and testing in accordance with IBC Sections 107.1, 1704, and 1705 and define duties
PROJECT: TULSA COMMUNITY COLLEGE BOOKSTORE RENOVATION PROJECT NUMBER: ISSUE: CONSULTANT: SEAL: SHEET NUMBER: GENERAL NOTES
GENERAL NOTES TYPICAL DETAILS REQUIRED VERIFICATION & INSPECTION OF CONCRETE CONSTRUCTION VERIFICATION AND INSPECTION 1. Inspection of reinforcing steel, including prestressing tendons and placement. 2.
MICHIGAN DEPARTMENT OF TRANSPORTATION SPECIAL PROVISION FOR QUALITY CONTROL AND ACCEPTANCE OF PORTLAND CEMENT CONCRETE
MICHIGAN DEPARTMENT OF TRANSPORTATION SPECIAL PROVISION FOR QUALITY CONTROL AND ACCEPTANCE OF PORTLAND CEMENT CONCRETE CFS:JFS 1 of 28 APPR:TES:DBP:07-11-17 FHWA:APPR:07-13-17 a. Description. The Contractor
Behaviour of Post-Installed GFRP Adhesive Anchors in Concrete
NSERC Industrial Research Chair in Innovative FRP Composites for Infrastructures Behaviour of Post-Installed GFRP Adhesive Anchors in Concrete Prepared by: Ehab A. Ahmed, Ehab El-Salakawy, and Brahim Benmokrane
NPCA QUALITY CONTROL MANUAL For Precast Concrete Plants
Dedicated to expanding the use of quality precast concrete NPCA QUALITY CONTROL MANUAL For Precast Concrete Plants 13th EDITION January 2018 Copyright 2017 by National Precast Concrete Association (NPCA)
CE 6506 CONSTRUCTION TECHNIQUES, EQUIPMENTS AND PRACTICES UNIT 1 CONCRETE TECHNOLOGY 1. List the various methods of mix design. 2. Name some methods of non-destructive testing of concrete. 3. What is the