Hanson Precast Products. Retaining Walls Featuring the unique Hanson QuickLift system
|
|
- Kelly Elliott
- 6 years ago
- Views:
Transcription
1 Hanson Precast Products Retaining Walls Featuring the unique Hanson QuickLift system
2 Bespoke mouldage facility Rigorous quality assurance About us The Facility The QuickBuild range of products is manufactured at our Somercotes facility in Derbyshire, which has been manufacturing heavy precast products for over 50 years. Continuing investment means that it has some of the most modern facilities in the country. With a production capacity of over 70,000 tonnes a year, products of up to 24 tonnes can be manufactured routinely, and significantly heavier on a bespoke basis. Engineering and Design With customers ranging from the nuclear industry through to waste recycling, product performance requirements vary greatly. A dedicated team of engineers and designers, based at Somercotes, can advise on all aspects of a project from outline design through to final value engineering. They are supported by Hanson s specialist technical teams in areas such as concrete mix design and steel fabrication. No other precast manufacturer can offer this level of support. Quality Assurance From initial design through to on-site logistics, all aspects of the Somercotes operation meet the most exacting quality standards. These are maintained by Hanson s own in-house Quality Inspectors, and audited by external certification bodies. Somercotes meets the requirements of ISO 9001, ISO 14001, ISO 6001 and ISO All precast engineering is carried out in accordance with British Standards or EC 2 as required. Mouldage and Cage Facility As well as standard products, a wide range of bespoke products are designed and manufactured at Somercotes. This is achieved quickly and cost-effectively by maintaining a highly skilled in-house mould joinery team, and a steel reinforcement bending and fabrication facility. Fixing Services Hanson provides a variety of fixing services for precast products. Installation teams operate in line with all current Health and Safety regulations, and can supply all required equipment including craneage. Customer Service and Support We are committed to providing an excellent product and service to our customers. Support and advice is available at every stage in the project cycle from engineering design through to on-site logistics. Purpose-built, high quality mouldage Bespoke cage making facilities 2 Hanson Retaining Walls Hanson Retaining Walls 3
3 Retaining Walls Technical Information We are proud to introduce our new range of QuickBuild retaining wall products, which have been specifically engineered using our 50 years of experience within the precast and contracting sectors. We understand that as a client you are looking for the most efficient fixing solution for your project, hence our design utilises a number of key features which focus on saving time and resource by up to 20%. The Range 1.00m wall 500mm 450kg 150mm 1.50m wall 1500mm 750mm 650kg 150mm The Hanson QuickLift System Unlike many other systems we have no hidden costs for expensive lifting gear. 1.75m wall 1750mm 875mm 1013kg 220mm The QuickLift System has been developed to minimise lifting times, as well as eliminate working at height issues. Unlike many other systems we have no hidden costs for expensive lifting gear, or the requirement to fit lifting attachments. Using a standard lifting hook, a telehandler can complete a lift from delivery vehicle to final position with minimal secondary operations, increasing efficiency against alternative solutions by some 20%. In addition all lifting positions are located within working height zones eliminating the need to work at height. 2.00m wall 2000mm 1138kg 250mm Finishes To further enhance efficiencies on-site we also offer cast-in finishes. Using state-of-the-art form liner technology the QuickBuild retaining wall unit can be cast with a preformed finish to provide an aesthetically pleasing appearance to the end user. Please see our Finishes and Textures section on page 10 for further information. 2.50m wall 2500mm 1250mm 1370kg 250mm Corner Unit We offer a range of economical corner details. For further information call or m wall 3000mm 1500mm 1800kg 250mm QuickBuild Joint Profile All our standard units are provided with a unique interlocking detail which further enhances installation times through accurate and fast alignment. The added benefits of this detail also ensure a strong and reliable connection detail which can be made waterproof with an appropriate sealant. 3.75m wall 3750mm 1875mm 2700kg 375mm DESIGN SCOPE / PHILOSOPHY The reinforced concrete precast retaining wall unit has been designed in accordance with the latest set of Eurocodes in particular BS EN : Eurocode 7 - Geotechnical Design with the UK National Annex and BS EN : Eurocode 2 - Design of concrete structures with the UK National Annex have been used. STORAGE CAPACITY The unit will be designed to be loaded from either side with the following conditions: retained material level with the top of the wall and with an applied surcharge of 10kN/m 2 or a sloping backfill with a maximum angle of 35º without an imposed surcharge. The retained material will be assumed to be granular and drained with a specific maximum moist density of 18kN/m 3. For more information on specific material densities see table 1. When installed with a suitable joint sealant the wall becomes waterproof. Table 1 Storage material densities Density (kn/m 3 ) Medium dense sand Loose sand / gravel Grain Woodchip EXPOSURE CONDITIONS Due to a nominal cover of 45mm (including c of 5mm) and C50/60 concrete used in the manufacture of the retaining wall units they are suitable for the following exposure conditions XC3/XC4, XD3, XS3, XF4 as defined in BS8500-1:2006. These cover severe conditions such as tidal splash / spray zones and de-icing salts. The limiting crack width will be taken as 0.3mm and the design life span will be at least 50 years. Material OVERALL STABILITY The primary job of the unit is to retain the material behind and to do this the stem and the base have been designed to withstand the applied forces. However, to resist overturning and sliding with a factor of safety of 2 for overturning and 1.5 for sliding respectively the units require anchoring into a mass or reinforced insitu concrete base which can be designed by Hanson Concrete or other manufacturers to give enough resistance to the overturning and sliding forces. The grouted anchor bolts will be post fixed into the suitable base below and secured with a washer plate on top of the unit to increase the bearing capacity onto the base slab and prevent punching shear of the bolt head through the unit. The resistance of the anchors into the base must be checked by others. In addition to the overturning and sliding resistance of the supporting insitu base, the overall ground bearing pressure must be checked by others and considered when designing the insitu support base. Sewage waste Rolled Silage 4+72z (see note 1) Paper waste Note 1 z = depth below rolled surface of grass silage or the compacted surface of bedding (in m). Silage loading is in accordance with BS : 2003 Note 2 For other material bulk densities please refer to Table 7 within BS : 2003 Composted green waste PFA HOLDING DOWN BOLTS M20 (grade 8.8) Anchor with 200mm minimum embedment into the insitu foundation with 100x100x10mm washer plate with 22mm diameter hole. Hole to be grouted up using non-shrink grout with minimum strength of 40N/mm 2. For more detailed downloadable section drawings please see our website hanson-precast.co.uk/range For more information on Hanson ready-mixed concrete visit hanson.com/uk/concrete FOUNDATION TYPE Assumed to be uncracked, mass / reinforced concrete base of minimum strength 25N/mm 2. This can be designed by Hanson Concrete or other manufacturers to resist the overturning and sliding forces exerted by the retaining wall unit and to consider the allowable ground bearing pressure to the relevant site. STEEL GRADES All steel to be grade S275 UNO All Anchor Bolts to be grade 8.8 UNO See detailed bolt calculations. CONCRETE SPECIFICATION The concrete shall be produced in accordance with BS Compressive strength class C50/60 Maximum water/cement ratio 0.35 Minimum cement/ combination content 380 kg/m 3 Allowable cement/combinations types IIB-V IIIA IIIA+SR IIIB IIIB+SR (DC-4m) Maximum aggregate size Aggregates REINFORCEMENT NOTES All reinforcement to be high yield with a yield strength of 500N/mm 2. All reinforcement to be Type 2 deformed bars including any specified mesh. Minimum lap length to be 40 x smallest lapped bar diameter. LOADING OPTION 1 BACKFILL POSITIONED OVER BASE OF UNIT LEVEL BACKFILL 10KN/M 2 SURCHARGE DRAINAGE ASSUMED TO REAR OF WALL STEM LOADING OPTION 2 BACKFILL POSITIONED OVER BASE OF UNIT SLOPING BACKFILL - 35º NO SURCHARGE DRAINAGE ASSUMED TO REAR OF WALL STEM 20mm Freeze thaw resisting Chloride content class Cl 0,40 Consistence class S3 LOADING OPTION 1 LOADING OPTION 2 4 Hanson Retaining Walls Hanson Retaining Walls 5 Hanson Retaining Walls 6
4 % increase in efficiency against alternative lifting solutions. 5 3 Retaining Walls Storage Estimator 1 The quick way to calculate your project. hanson-precast.co.uk QuickLift Handling Guide Hanson has developed a unique online tool that calculates storage capacity and the number of Hanson QuickBuild retaining walls you need, helping you to plan your project quickly and easily. 1 The Hanson QuickLift system has been developed to ensure that no additional lifting equipment is needed other than conventional chains and hooks for the three lifting points. Unlike many other systems we have no hidden costs for expensive lifting gear. Using a standard lifting hook attachment a handler can complete a lift from wagon to final position with minimal secondary operations, increasing efficiency against alternative solutions by some 20%. 2 The QuickBuild walling system is delivered on a flat bed wagon, nestled for maximum efficiency. 3 The QuickBuild walling system can be lifted off the wagon using either the three point QuickLift system or a traditional fork lift methodology. NB: Ensure that the loader is of an appropriate capacity to lift the units. For individual unit weights please see unit specification. Lifting units with the three point QuickLift system allows the units to be easily manoeuvred and rotated 180 degrees, thus enabling units to be placed directly adjacent to their final position. NB: when determining the appropriate handler the radial dimension required to rotate the unit must be considered and chains set to a max angle of 65 degrees. A banks man should be used at all times to ensure units are safely spotted and manoeuvred. 4.0 Once unit is in position adjacent to its final location the lifter to the toe should be removed and the chains to the two main wall lifters are shortened and secured to equal lengths ensuring a level and safe lift. 4.1 The unit can then be lifted slowly balancing the weight on the back of the heel. NB: if lifting off a hard surface then a block or mat should be used to protect from damage. 4.2 As the unit is lifted the vehicle should move forward slowly ensuring that the lifting chains are vertical at all times. 4.3 Once the unit is upright the third lifter can be re-attached to provide additional stability and maneuverability, allowing the units to be lifted clear of the ground into final position. 5 The QuickBuild wall can then be easily located into its final position. When positioning adjacent to another unit the male connection joint of the suspended unit should be inserted into the female then lowered slowly into position ensuring the units remain interlocked. Hanson Storage Estimator Smartphone scan code Hanson Retaining Walls 7 8 Hanson Precast Products Hanson Precast Products 9
5 Finishes & Textures Using state-of-the-art form liner technology the QuickBuild retaining walls or bespoke precast items can be cast with a preformed finish to its outside face providing an aesthetically pleasing finish to the end user. We have over 200 designs to choose from and are happy to work with bespoke designs. In association with For further information please call or our dedicated sales team. QuickBuild Brick Finishes The Hanson QuickBuild walling system is an innovative, factory fabricated brick and block wall panel fascia system. Utilising high performance bonding mortar a single brick panel is created which can be used to finish our QuickBuild retaining walls or other bespoke concrete such as abutments, flood defence systems and parapet walls. Fixing up to 150m of panel a day makes this an efficient and labour saving way of finishing structures. Working with our bricks business we are able to offer a vast selection of colours layouts and textures. For further information call or ROUGH & TEXTURED FINISHES STONE & ROCK FINISHES BRICK & MASONRY RIB & WAVE PATTERNS SAMPLE COLOURS FROM THE A-Z GUIDE To see our A Z guide visit hanson.com/uk/bricks and click on Brick range Marne Bretagne Esterel Zyclop Browns Reds Nil Santa Cruz Andulca Tigris Isar Romanche Kolcher Fulda Buffs Yellows Blues & Greys 10 Hanson Retaining Walls Hanson Retaining Walls 11
6 Bespoke Products Expertise and capabilities In addition to our core product ranges Hanson can provide a comprehensive design, manufacturing and fixing service to meet the requirements of both building and civil engineering clients for bespoke precast concrete products. Specialist stair flights Hanson has been designing precast products and system solutions for over 50 years using a dedicated in-house engineering team who specialise in precast development. We are committed to supporting our prospective clients with this expertise from the initial outline plan of a project to full design implementation. We will ensure that we support and listen to you our client, providing valued engineering input throughout the process to ensure the most efficient and cost effective solution. Our precast facility is based at Somercotes, Alfreton. We have the capability of manufacturing units up to 24 tonnes and have in-house capability for mould manufacture and cage production. Recent projects include: Ground beams Flood defence walls Structural building frames Parapet units Precast floor slabs Railway platform units Digester tanks and other large bespoke structures Walling and cloaking Barriers The Hanson QuickBuild Barrier is available in two standard sizes of 1500mm and 2500mm, although we are happy to produce bespoke lengths if required. The Hanson QuickBuild Barrier is ideal for protecting sites that are no longer in use for a short or long-term period. The units can be painted with high visual warning colours, contact phone numbers to aid with security or simply company branding. For details on this, please contact our sales team. All concrete security barriers are manufactured with precast grooves in the bottom of the unit to enable easy handling using a forklift. We can provide the option to remove these grooves providing screw out lifters to the tops of the units to further aid security if required. Please note: the QuickBuild Barrier is not suitable for highway or structural use. Barrier weights and dimensions 715mm High x 850mm Wide x 1500mm Long 1683kg 715mm High x 850mm Wide x 2500mm Long 2805kg For further information please call or our dedicated sales team. Escape shafts QuickBuild retaining walls and flood defence QuickBuild box culverts and channel sections Bridge parapets Columns and beams Omnia Bridge Deck Should you have a project that you wish to discuss, please contact our engineering and sales department either via or by calling: Tel: precast@hanson.com 12 Hanson Retaining Walls Hanson Retaining Walls 13
7 Hanson Cement Our companies and products Hanson UK is the leading supplier of heavy building materials to the UK construction industry. We are split into three business lines Hanson Cement, Hanson Building Products and Hanson Quarry Products. Hanson UK is owned by the HeidelbergCement Group, which employs over 53,000 people and operates worldwide. Hanson UK employs around 5,000 people across over 300 sites. For detailed information on all areas of Hanson and our products visit: Hanson UK products and services Concrete Ready-mixed concrete Ready-mixed mortar Dry silo mortar Screed EcoPlus Bulk cement products Grey White Blends Regen (GGBS) Aggregates Sand Gravel Crushed rock Recycled aggregates Packed products Cement Asphalt Hot rolled asphalt Ready to use concrete, mortars, asphalt, aggregate and sand Stone mastic asphalt Asphalt macadams Contracting Highway maintenance Road surfacing Civil engineering Wind farm construction Waste to energy facilities MOD works Bricks Clay bricks and brick specials Clay pavers Bespoke clay products Blocks Aircrete Aggregate Precast concrete Retaining walls Culverts Barriers Floors Stairs Structural walls Basements Off-site solutions Cladding and render systems Cladding and render systems External Wall Insulation (EWI) Structural EWI Fastbrick Other products and services SUDS Geothermal Roofing Chimneys Brick and block laying contractors Hanson Precast Products Hanson House, 14 Castle Hill, Maidenhead, Berkshire SL6 4JJ hanson-precast.co.uk 11/2012/2777MICH
Wilnecote specification products
Wilnecote specification products High quality extruded clay facing bricks from Wilnecote Premium extruded range Dimensions range Blended range Staffordshire Etruria Marl clay fired at between 1080 and
More informationBox Culverts. Easy to install, suitable for very shallow or deep fill, ideal for use in a wide variety of civil engineering applications.
Box Culverts Box Culverts Easy to install, suitable for very shallow or deep fill, ideal for use in a wide variety of civil engineering applications. 2 3 System Overview Forterra is one of the largest
More informationUniclass L5211 CI/SfB. Hanson Building Products roofing solutions. November clay ridge & finials RED BANK
Hanson Building Products roofing solutions November 2008 Uniclass 5211 CI/SfB (47) Ng2 RED BANK clay ridge & finials Clay Ridge & Finials Clay Ridges & Finials Quality Assurance Hanson Red Bank has been
More informationRPC Contracts is committed to innovative product development and manufacture. T o help you obtain maximum enjoyment and long service from any RPC
RPC Contracts is committed to innovative product development and manufacture. T o help you obtain maximum enjoyment and long service from any RPC Contracts product, we would be pleased to make you aware
More informationHollowcore Floors. The ideal structural floor solution for all building types in all sectors.
Hollowcore Floors Hollowcore Floors The ideal structural floor solution for all building types in all sectors. 2 3 System Overview Prestressed hollowcore units form part of the comprehensive range of precast
More informationSERIES 1100 KERBS, FOOTWAYS AND PAVED AREAS
MANUAL OF CONTRACT DOCUMENTS FOR HIGHWAY WORKS VOLUME 1 THE SPECIFICATION FOR HIGHWAY WORKS SERIES 1100 KERBS, FOOTWAYS AND PAVED AREAS Contents Clause Title Page 1100 (02/17) General 2 #1101 Precast Concrete
More informationPolyfoam Floorboard For thermal insulation of floors
Strong Water resistant Versatile Lightweight Ozone friendly Recyclable Description is a high performance, 100% ozone friendly, extruded polystyrene, rigid board insulation. It is lightweight, yet has excellent
More informationwonderwall LIGHTWEIGHT CLADDING SYSTEM FINISHED WITH HIGH QUALITY CLAY BRICK SLIPS BRE CERTIFIED Cladding solutions Uniclass L513:P332 CI/SfB
Cladding solutions Uniclass L513:P332 CI/SfB EPIC E239:X32 (41) Xg2 wonderwall LIGHTWEIGHT CLADDING SYSTEM FINISHED WITH HIGH QUALITY CLAY BRICK SLIPS BRE CERTIFIED FEATURES AND BENEFITS Using the Wonderwall
More informationRedi Rock Specification and Installation Manual
Redi Rock Specification and Installation Manual 1.0 General Scope This Specification covers the Design, Materials and Installation of Redi Rock modular block Retaining and Freestanding Wall systems as
More informationBISON PRECAST FLOORING SPECIFICATION
BISON PRECAST FLOORING SPECIFICATION 1.0 SCOPE OF THE SPECIFICATION 1.01 Relates to: This specification covers the design, manufacture and associated site work of the following types of floors:- Hollowcore
More informationHanson Quarry Products Introducing a new in asphalt
Hanson Quarry Products Introducing a new in asphalt 50% less CO2 n up to 50% recycled content n faster completion of resurfacing work n reduced binder ageing n enhanced durability n available from selected
More informationPC Beam Shoe. Corbel system to support beams. Technical Manual. Version: DK 4/2012 Design standard: DS EN Eurocodes + NA (Denmark)
PC Beam Shoe Corbel system to support beams Version: DK 4/2012 Design standard: DS EN Eurocodes + NA (Denmark) Technical Manual PC Beam Shoe Corbel system to support beams System benefits Easy and fast
More informationCavity Tray Application
Cavity Trays Cavity Tray Block Cavity Trays Page 4 Door & Window Cavity Trays Page 8 Lead Chimney Trays Page 9 Inter-loc Horizontal Cavity Trays Page 7 Lintel Cavity Trays Page 8 Brick Cavity Trays Page
More informationTECHNICAL MANUAL. PC Beam Shoe. Hidden Beam Shoe for Corbel System
TECHNICAL MANUAL PC Beam Shoe Hidden Beam Shoe for Corbel System Version: PEIKKO GROUP 03/2012 PC Beam Shoe Corbel system to support beams System benefits Easy and fast beam installationtion Fits into
More informationThe system: it supports 3 load classes (A15, B125, C250) in compliance with Standard EN 1433
The system: it supports 3 load classes (A15, B125, C250) in compliance with Standard EN 1433 it is made up of a channel - entirely made from HD-PE - which needs no strengthening frame it has a wide usable
More informationBordeaux Walling. Product & Technical Information
Product & Technical Information BORDEAUX WALLING Piece Piece Piece Block Block Block Block Pins No. per per Height Length Width Weight Layer Cube (kgs) 1 2 3 1 2 10 150 400/350 250 28 Yes 2 2 10 150 300/300
More informationPENTABLOCK Technical Information 190mm Series
PENTABLOCK Technical Information 190mm Series The PENTABLOCK Walling System was developed in consultation with masonry construction stakeholders with an aim of reducing labor time and material costs required
More informationWATER AND DRAINAGE. Drainage Around Walls Water Applications Drainage Structures Water and Drainage Q & A
WATER AND DRAINAGE Drainage Around Walls Water Applications Drainage Structures Water and Drainage Q & A H CONSTRUCTION H-1 W A T E R A N D D R A I N A G E DRAINAGE AROUND WALLS Poor drainage is a leading
More informationStone and Masonry Veneer
Stone and Masonry Veneer R703.7 Stone and masonry veneer, general. Stone and masonry veneer shall be installed in accordance with this chapter, Table R703.4 and Figure R703.7. These veneers installed over
More informationBison Precast Flooring Specification
Page: 1 of 4 1.0 SCOPE OF THE SPECIFICATION 1.01 Floor types: This specification covers the design, manufacture and associated site work for the following floor types; Hollow core floors Composite hollow
More informationHOLLOW CORE FLOORS SPEED AND STRENGTH
HOLLOW CORE FLOORS SPEED AND STRENGTH CONTENTS 2 3 4 5 7 8 9 10 12 13 14 INTRODUCTION PRECAST CONCRETE FLOORS T HE A DVANTAGES BISON HOLLOW CORE FLOORS BEARINGS FALSE CEILINGS AND SOFFIT FIXINGS BISON
More information(Old examination format for reference only)
The Institution of Structural Engineers Associate-Membership Examination 11 APRIL 2003 INSTRUCTIONS TO CANDIDATE 1. The examination comprises two sessions separated by a lunch break of 1 2 hour, during
More informationSPECIFICATION FOR REINFORCED SOIL WALL
SPECIFICATION FOR REINFORCED SOIL WALL 1.0 EXTENT OF WORK The work shall consist of Reinforced Soil walls built in accordance with this specification and in conformity with the lines, levels and details
More informationSECTION 1 TERMS, DEFINITIONS, ABBREVIATIONS, UNITS OF MEASURE, AND SYMBOLS 1-3 ABBREVIATIONS Common Usage.
SECTION 1 TERMS, DEFINITIONS, ABBREVIATIONS, UNITS OF MEASURE, AND SYMBOLS 1-3 ABBREVIATIONS. 1-3.2 Common Usage. Abbreviations Word or Words PAV.Pressure Aging Vessel PCC..Portland Cement Concrete PE.Polyethylene
More informationMultideck 146. Contents
Contents Specification and Design 55 Load Tables 57 Fire Performance 60 Sound Attenuation 63 Concrete Volume Savings composite steel deck is optimised to minimise the concrete volumes on longer spans providing
More informationAUGUST 2017 HASTINGS. retaining walls installation guide
AUGUST 2017 HASTINGS retaining walls installation guide RETAINING WALL INSTALLATION GUIDE RETAINING WALL information Austral Masonry retaining wall blocks are an ideal choice for retaining walls in gardens,
More informationSTRUCTURAL BUILDING PRODUCTS. The authentic, sustainable and economical alternative to natural stone.
STRUCTURAL BUILDING PRODUCTS The authentic, sustainable and economical alternative to natural stone. WELCOME Bekstone is a leading Independent manufacturer of reconstituted walling stone, architectural
More informationNOVEMBER 2016 GRANDWALL. retaining walls installation guide
NOVEMBER 2016 GRANDWALL retaining walls installation guide RETAINING WALL INSTALLATION GUIDE RETAINING WALL information Austral Masonry Grandwall retaining wall blocks are an ideal choice for retaining
More informationTasman Retaining Wall System
Tasman Retaining Wall System The Tasman Retaining Wall System incorporates purpose made corners and capping units to provide classical reconstructed stone retaining walls for any landscape situation. From
More informationPAVING SLABS ON AGGREGATE BED FOR ROOF PLAZA DECKS
SECTION 32 14 13.16 PAVING SLABS ON AGGREGATE BED FOR ROOF PLAZA DECKS (1995 MasterFormat Section 02784) Note: This guide specification for the U.S. is for paving slabs used as ballast and/or paving on
More informationBBA 001 Documents included under the scope of BBA s ISO UKAS accreditation
BBA 001 Documents included under the scope of BBA s ISO 17065 UKAS accreditation Product Standard Building Systems and Kits BBA Technical Specification 001 Ceiling Products BBA Technical Specification
More informationStructural Precast Products. For the Civil Engineering Sector
Structural Precast Products For the Civil Engineering Sector Structural Precast Products FOR THE CIVIL ENGINEERING SECTOR Box Culverts System overview 4 Benefits 5 Design and specification 6-7 Technical
More informationFLAT. The system: it supports 3 load classes (A15, B125, C250) in compliance with Standard EN 1433
The system: it supports 3 load classes (A15, B125, C250) in compliance with Standard EN 1433 it is made up of a channel - entirely made from HD-PE - which needs no strengthening frame it has a wide usable
More informationCONCRETE TILE PAVERS
Section 32 14 13 CONCRETE TILE PAVERS (1995 MasterFormat Section 02780) Note: This guide specification for the U.S. is for the installation of concrete tile paving units whose thickness are less than the
More informationfreestone eco Prestige & quality DIY vertical wall Large blocks - 10/m 2 Smooth surface finish No concrete footings
freestone eco Retaining Wall SystemTM The Freestone ECO Retaining Wall System TM is a more sustainable DIY, vertical retaining wall which is manufactured with up to 40% recycled glass aggregate to provide
More informationFREESTONE ECOTM. Retaining Wall SystemTM. No one knows Blocks and Pavers better
FREESTONE ECOTM Retaining Wall SystemTM The Freestone ECO Retaining Wall System TM is a more sustainable DIY, vertical retaining wall which is manufactured with up to 40% recycled glass aggregate to provide
More informationCI/SfB. (Ff2) June 2007 CIVIL E NGINEERING PRODUCTS STEPOC SYSTEM. innovators in masonry
CI/SfB (Ff2) June 2007 CIVIL E NGINEERING PRODUCTS STEPOC SYSTEM www.forticrete.co.uk innovators in masonry STEPOC SYSTEM THE FASTER, MORE E CONOMICAL WAY TO BUILD WALLS WITH EXCEPTIONAL STRENGTH Stepoc
More information2002 Advanced Building Products, Inc., P.O. Box 98, Springvale, Maine TEL: ; FAX: ; WEBSITE:
SECTION 07651 FLEXIBLE COPPER SHEET FLASHINGS Advanced Building Products, Inc. manufacturer many types of flexible copper sheet flashings. Due to their ductility, high tensile strength, and resistance
More informationConnex. Mortarless Masonry Block System. Innovative dry stack system
Connex Mortarless Masonry Block System Innovative dry stack system Connex is a dry stack masonry system When reinforced and core-filled, Connex is ideal for load-bearing basement walls, blade walls and
More informationBELMURO WALL SYSTEM INSTALLATION GUIDE
BELMURO WALL SYSTEM INSTALLATION GUIDE TABLE OF CONTENTS TABLE OF CONTENTS... 1 SYSTEM DESCRIPTION... 2 DRY STACK SYSTEM: INSTALLATION GUIDE... 5 GEOGRID WALL SYSTEM: INSTALLATION GUIDE... 9 MASONRY WALL
More informationSPECIFICATION FOR PRECAST/ COMPOSITE CONCRETE FLOORS/ ROOF DECKS SECTION E60
SPECIFICATION FOR SECTION E60 A 2007-09-26 S.W. Revision Date Issue Authorised By Approved for Issue SW Date 24.09.07 clarkebond Page 1 of 6 To be read with Preliminaries/ General Conditions. GENERAL 10
More informationNo other walling system can be installed as quickly. Allows easy cleaning and unloading. No protruding toe to get caught on.
I r i s hmanuf ac t ur er s : Al f abl oci r el and Vi s i t :ht t p: / /www. al f abl oc i r el and. c om Alpha Bloc NEW A4 pp 9/5/05 12:32 pm Page 3 Alfabloc The unique Alfabloc walling system is only
More informationSPECIFICATIONS FOR PRECAST MODULAR BLOCK RETAINING WALL SYSTEM (revised 5/8/7)
Page 1 of 7 STONE STRONG SYSTEMS SPECIFICATIONS FOR PRECAST MODULAR BLOCK RETAINING WALL SYSTEM (revised 5/8/7) PART 1: GENERAL 1.01 Description A. Work includes furnishing and installing precast modular
More informationGRANDE WALL large CONCRETE BLOCKS FOR THE CONSTRUCTION OF RETAINING WALLS. 1339_Feuillet_Permacon_Grande_ang.indd 1
GRANDE WALL large CONCRETE BLOCKS FOR THE CONSTRUCTION OF RETAINING WALLS 1339_Feuillet_Permacon_Grande_ang.indd 1 27-05-15 14:03 GRANDE WALL The Grande wall system is designed for building retaining walls
More informationWARMFLOOR. Installation Guide.
WARMFLOOR Installation Guide 9 7 8 5 3 1 Damp Proof Membrane (supplied by others to suit wall) 9 Air Brick / Vent (supplied by others) Product overview The Lynx Warmfloor system is a cost effective highly
More informationBETTER BY DESIGN BRICK SLIP MASONRY SUPPORT INSTALLATION INSTRUCTIONS. igmasonrysupport.com
BETTER BY DESIGN BRICK SLIP MASONRY SUPPORT INSTALLATION INSTRUCTIONS KEY CONSIDERATIONS FOR CORRECT INSTALLATION To achieve the design capacity of the product, it must be installed in the correct manner.
More informationTechnical Data Sheet NEC/GRAN/95:01
Technical Data Sheet NEC/GRAN/95:01 Installation Guidance Notes Granular Surround Note : These guidance notes refer only to the installation of Granular surround underground tanks. These guidance notes
More informationWARMFLOOR. Installation Guide.
WARMFLOOR Installation Guide 9 7 8 5 3 1 Damp Proof Membrane (supplied by others to suit wall) 9 Air Brick / Vent (supplied by others) Product overview The Lynx Warmfloor system is a cost effective highly
More informationStructural Steel Products UK & Ireland. Multideck Technical Handbook
Structural Steel Products UK & Ireland Multideck Technical Handbook 2 Structural Steel Products Multideck Multideck Structural Steel Products 3 4 Structural Steel Products Multideck Contents Multideck
More informationECHO FLOORS (PTY) LTD HOLLOW-CORE CONCRETE FLOORING A NAME TRULY CAST IN CONCRETE
ECHO FLOORS (PTY) LTD HOLLOW-CORE CONCRETE FLOORING A NAME TRULY CAST IN CONCRETE Introduction to Echo Floors The oldest company in the group, established in Gauteng in 1982. The core business is the manufacture
More informationCONSTRUCTION SPECIFICATION FOR CONCRETE UNIT PAVERS
CITY OF TORONTO STANDARD CONSTRUCTION SPECIFICATIONS FOR ROADS TS 3.80 November 2010 CONSTRUCTION SPECIFICATION FOR CONCRETE UNIT PAVERS INDEX TS 3.80.01 SCOPE... 2 TS 3.80.02 REFERENCES... 2 TS 3.80.03
More informationRetaining Wall Systems
Retaining Wall Systems A family of Retaining Wall Products The versatile Allan Block product line allows easy design and construction of retaining walls to meet specific engineering and site requirements.
More informationThe difference is Guidance for the preparation of Deck Manufacturing Schedules
The difference is Guidance for the preparation of Deck Manufacturing Schedules innovation, commitment, support. 2 Guidance for the preparation of Deck Manufacturing Schedules Minimum Requirements for Schedule
More informationThis type of masonry shall consist of brick laid in full beds of cement mortar.
SECTION 11.0 DRAINAGE STRUCTURES 11.01 Scope of Work This item shall consist of installation and construction of storm drainage pipes, culverts, basins, headwalls, manholes, junction boxes, head ditches,
More informationConnex Mortarless Masonry Block System
Connex Mortarless block wall system from Boral The Boral Connex mortarless system comprises three modular components which key together eliminating the need for mortared joints above the first course.
More informationTasman Retaining Wall System
Tasman Retaining Wall System The Tasman Retaining Wall System incorporates purpose made corners and capping units to provide classical reconstructed stone retaining walls for any landscape situation. From
More informationPOZZOLANIC CEMENT Fly ash based (CEM IV/B-V 32,5N) Properties & Applications
PROPERTIES & APPLICATIONS POZZOLANIC PAGE 1 OF 7 Uniclass L621 CI/SfB March 2014 Yq2 POZZOLANIC CEMENT Fly ash based (CEM IV/B-V 32,5N) Properties & Applications PROPERTIES & APPLICATIONS CEMENT PROPERTIES
More informationICBO Evaluation Service, Inc Workman Mill Road, Whittier, California
Reissued June 1, 2002 ICBO Evaluation Service, Inc. 5360 Workman Mill Road, Whittier, California 90601 www.icboes.org Filing Category: DESIGN Concrete DURISOL WALL FORMS FOR CONCRETE CONSTRUCTION DURISOL
More informationTECHNICAL INFORMATION SCREED
TECHNICAL DATA SHEET SCREED Ver Nov 2015 TECHNICAL INFORMATION SCREED Product Data Sheet No. 110/01 INTRODUCTION Tarmac ready-to-use cement sand levelling screed is a correctly proportioned factory produced
More informationConstruction Specification for Concrete Unit Pavers
Engineering & Construction Services Division Standard Specifications for Road Works TS 3.80 September 2017 for Concrete Unit Pavers Table of Contents TS 3.80.01 SCOPE... 2 TS 3.80.02 REFERENCES... 2 TS
More information850 SOLID LIGHTWEIGHT READYBLOCK
Material Datasheet 850 SOLID LIGHTWEIGHT READYBLOCK STANDARD FINISH With the ReadyBlock range of Dense and Lightweight Aggregate Blocks from CEMEX, you are assured to find the building solution you need.
More informationAnchor bolts ASTM F1554, Gr. 36 Wide flange beams ASTM A992, Fy = 50 ksi Misc. structural steel ASTM A36, Fy = 36 ksi
STRUCTURAL NOTES MATERIAL STRENGTHS Structural Steel Reinforcing Steel Concrete Masonry Structural Lumber Anchor bolts ASTM F1554, Gr. 36 Wide flange beams ASTM A992, Fy = 50 ksi Misc. structural steel
More informationPacked products guide The leading range of packed building products
Hanson Cement Our companies and products Hanson UK is the leading supplier of heavy building materials to the UK construction industry. We are split into three business lines Hanson Cement and Hanson Quarry
More informationBITUMEN-SET PRECAST CONCRETE PAVING SLABS
SECTION 32 14 13.16 BITUMEN-SET PRECAST CONCRETE PAVING SLABS (1995 MasterFormat Section 02784) NOTE: This guide specification is the U.S. for concrete paving slabs adhered with a neoprene mastic to a
More informationDow Building Solutions. How to order STYROFOAM and XENERGY products from Dow Building Solutions
Dow Building Solutions How to order STYROFOAM and XENERGY products from Dow Building Solutions Why choose STYROFOAM and XENERGY SL thermal insulation? Dow Building Solutions has decades of history in the
More informationreinforced besser block retaining walls
reinforced besser block retaining walls Preface The designs shown in the brochure are based on limit state design in accordance with the provisions of AS4678-2002 Earth retaining structures standard including
More informationEDGE RESTRAINT SYSTEM
EDGE RESTRAINT SYSTEM Whether its decorative block paving or precast flags, alternate edge restraint systems are taking the world of paving by storm and IrandiPRO is South Africa s first such system. Proudly
More informationECO PHOENIX CEMENT (fly ash based) BS EN CEM IV/B-V 32,5N Properties & Applications
PROPERTIES & APPLICATIONS ECO PHOENIX PAGE 1 OF 7 Uniclass L621 CI/SfB March 2014 Yq2 ECO PHOENIX CEMENT (fly ash based) BS EN CEM IV/B-V 32,5N Properties & Applications PROPERTIES & APPLICATIONS CEMENT
More informationEN REINFORCED MASONRY DESIGN EXAMPLE 1 (NOTE: THIS USES THE UK NATIONAL ANNEX NDP VALUES)
42.50 10.00 3.00 20.00 EN 1996-1-1 REINFORCED MASONRY DESIGN EXAMPLE 1 (NOTE: THIS USES THE UK NATIONAL ANNEX NDP VALUES) Reinforced Masonry - Reinforced Brickwork Stem Cantilever Pocket-Type Retaining
More informationTensarTech TW1 Wall System Earth Retaining Structures
Tensar model specification MS/TW1S_1 Issue date 28 February 2014 TensarTech TW1 Wall System Earth Retaining Structures This document is intended to form a basis for Tender documents where the following
More informationCHAPTER 8. Concrete Work
Concrete Work Clay Bricklaying Made Easy CONCRETE WORK Foundations for walls and piers All loadbearing walls and piers are required to stand on a concrete foundation, which must be able to receive and
More informationThe designer shall also submit additional information required by the University as described and underlined below.
I. Structural Engineering Submissions The designer shall submit all information required by the State Construction Office (SCO) as described in the State Construction Manual Chapter 300 - Project Design
More informationGEOGRID CONNECTION DETAIL OLYMPIA RADIUS UNIT
PLACE TWO STANDARD CONNECTORS IN EACH UNIT AS SHOWN (VERTICAL ORIENTATION) INSERT TWO CONNECTORS PER HORIZONTALLY ORIENTED BLOCK; INSERT ONE CONNECTOR PER VERTICALLY ORIENTED BLOCK SHIM BETWEEN BLOCK COURSES
More informationMagnumStone Specifications Gravity
MagnumStone Specifications Gravity SPECIFICATION FOR MAGNUMSTONE GRAVITY MECHANICALLY STABILIZED EARTH SYSTEM PART 1: GENERAL.01Description The work consists of supplying and installing all aspects of
More informationCONSTRUCTION SPECIFICATION FOR THE INSTALLATION OF ELECTRICAL CHAMBER
ONTARIO PROVINCIAL STANDARD SPECIFICATION METRIC OPSS 602 MARCH 1993 CONSTRUCTION SPECIFICATION FOR THE INSTALLATION OF ELECTRICAL CHAMBER 602.01 SCOPE 602.02 REFERENCES 602.05 MATERIALS TABLE OF CONTENTS
More informationHANDLING OF BRIDGE BEAMS ON SITE
TECHNICAL ADVICE NOTE HANDLING OF BRIDGE BEAMS ON SITE PRESTRESSED CONCRETE ASSOCIATION Additional advice may be obtained direct from PCA member companies, who will assist at the earliest stages of planning,
More informationDesign Guide for the use of Hydraulic Lime Mortar in Masonry with Lightweight Steel Framing
Design Guide for the use of Hydraulic Lime Mortar in Masonry with Lightweight Steel Framing EcoRight Ltd Unit 2 Paddock Road Caversham Reading Berkshire RG4 5BY Tel: 0845 873 3888 January 2018 EcoRight
More informationA-BEAM W Erection Manual 2
2 BEAM W Revision 6/2017 Finland 3 TABLE OF CONTENTS 1 ERECTION INSTRUCTIONS... 4 1.1 A-BEAM W... 4 1.2 Codes and standards to be followed during erection... 4 1.3 Documents to be followed in erection
More informationStructural Engineering
Structures can be classified based on deformation and type of primary load carried [i.e. Axial (tensile, compressive), flexure, shear and torsion] and their combinations. In order to determine the type
More informationModule number 3 provides an on-line, self-paced training seminar on chapter 4, foundations and chapter 5, floors from the residential code of ohio.
Module number 3 provides an on-line, self-paced training seminar on chapter 4, foundations and chapter 5, floors from the residential code of ohio. 1 This chapter sets forth the prescriptive requirements
More informationCity of Mesquite General Design Standards Revision Date:
SCREENING WALLS (Public and Private) Page 1 of 6 Section 1 General Design & Notes 1.1 Standards 1.1.1 All screening walls in the City of Mesquite and within its Extraterritorial Jurisdiction (ETJ), both
More informationEnvironmental Engineering Products. Grasscel
Environmental Engineering Products Grasscel Contents GRASSCEL TECHNICAL INFORMATION GRASSCEL 100 EDGE DETAIL INSTALLATION GUIDE ABOUT US 2 3 4 5 6 Grasscel Our Grasscel range of cellular concrete paving
More informationEnvironmental Engineering Products. Grasscel
Environmental Engineering Products Grasscel Contents GRASSCEL TECHNICAL INFORMATION GRASSCEL 100 EDGE DETAIL INSTALLATION GUIDE ABOUT US 2 3 4 5 6 Grasscel Our Grasscel range of cellular concrete paving
More informationSPECIFICATIONS FOR PRECAST MODULAR BLOCK RETAINING WALL SYSTEM (revised 9/17/18)
Page 1 of 8 STONE STRONG SYSTEMS SPECIFICATIONS FOR PRECAST MODULAR BLOCK RETAINING WALL SYSTEM (revised ) PART 1: GENERAL 1.01 Description A. Work includes furnishing and installing precast modular blocks
More information0331 Brick and block construction
0331 BRICK AND BLOCK CONSTRUCTION 1 GENERAL 1.1 STANDARDS Materials and construction: To AS 4773.1 and AS 4773.2. 2 PRODUCTS 2.1 DURABILITY Exposure environment: [complete/delete] Exposure locations: To
More informationroofing ROOFING Design of the base ROOFING DETAILS
DETAILS The general arrangement details and the principles to be followed at skirtings, upstands, abutments, verges, gutters and expansion joints are as details illustrated. SELECTION PARAMETERS It is
More informationSecura Grand Slate Lidl, Wembley
Secura Grand Slate Lidl, Wembley Contents 04 Secura Grand mortar-free retaining wall 06 Secura Lite mortar-free retaining wall 08 Technical Information 09 Drainage, Geogrid & Backfill 10 Instructions &
More informationNotes for Erection of Evergreen Maxi Wall Retaining Walls
Notes for Erection of Evergreen Maxi Wall Retaining Walls 1. Evergreen Maxi General Notes A. Project drawings - See project drawings for complete layout of utilities, railroad tracks, existing and proposed
More informationWaterproofing Systems. Cementitious.
Construction Joint 2 coats Triton TT55 + TTME OR 2 coats @ 0.75 kg/m² per coat Construction Joint 2 coats Triton TT55 OR 1 coat @ 1 kg/m² Screed Reinforced Concrete Waterproofing Systems Cementitious n
More informationOUR OBJECTIVE: TO PROVIDE EDUCATION ON AN ALTERNATIVE TO TRADITIONAL CONCRETE FORMWORK FOR WALLS
OUR OBJECTIVE: TO PROVIDE EDUCATION ON AN ALTERNATIVE TO TRADITIONAL CONCRETE FORMWORK FOR WALLS AUSTRALIAN INVENTED, OWNED AND MANUFACTURED Launched in 2006, and prompted by increasing construction costs
More informationCONSTRUCTION SPECIFICATION FOR INSTALLATION OF ELECTRICAL CHAMBERS
ONTARIO PROVINCIAL STANDARD SPECIFICATION OPSS.PROV 602 NOVEMBER 2017 CONSTRUCTION SPECIFICATION FOR INSTALLATION OF ELECTRICAL CHAMBERS TABLE OF CONTENTS 602.01 SCOPE 602.02 REFERENCES 602.03 DEFINITIONS
More informationEPIC F312. Uniclass. CI/SfB April Yq4. Natural Hydraulic Lime Mortar
Uniclass CI/SfB April 2017 EPIC F312 Yq4 Natural Hydraulic Lime Mortar K Lime: a range of dry bagged mortars made from Natural Hydraulic Lime, selected sand and other performance enhancing additives, derived
More informationA.2.a Random Riprap... Table
3601 RIPRAP MATERIAL 3601.1 SCOPE Provide stone and filter layer material for use in random or hand-placed riprap, gabion, and revet mattress construction. 3601.2 REQUIREMENTS A Stones A.1 Quality Provide
More informationThe Ashland Project. Total Area: 1,778 Sq.Ft. 3 Bedroom, 2 Bath, 2 Car Garage
The Ashland Project Total Area: 1,778 Sq.Ft. 3 Bedroom, 2 Bath, 2 Car Garage The garage and bedroom extend from the front of this three bedroom home, drawing you visually into the entryway. Brick and stucco
More informationPAVING SLABS ON A CONCRETE BASE
SECTION 32 14 13.16 PAVING SLABS ON A CONCRETE BASE (1995 MasterFormat Section 02784) Note: This guide specification for the U.S. is for paving slabs on a sand bed over concrete for pedestrian applications.
More informationGetting the best from Wienerberger Bricks A Guidance Note on Garden & Retaining Walls
Getting the best from Wienerberger Bricks A Guidance Note on Garden & Retaining Walls Introduction Correct construction and detailing of freestanding garden and retaining walls is important to ensure long
More informationSECTION UNIT MASONRY
SECTION 04200 UNIT MASONRY PART 1 GENERAL 1.01 SUMMARY A. Furnish labor, materials, and equipment and perform functions required in the installation and maintenance of the work covered by this Section.
More informationCASE STUDY SERIES #24
THE PROJECT TRAVELODGE NEW BUILD APPLICATION GABION CLADDING TO STEEL SHEET PILES SUPPLY INSTALLATION LOCATION GRAVESEND, KENT, UK DATE NOVEMBER 2017 CONTRACTOR CLIENT ARCHITECT BARNES CONSTRUCTION TRAVELODGE
More informationApplications. 5 reasons why you should choose Hebden X Grid cellular paving
5 reasons why you should choose Hebden X Grid cellular paving The British-made Hebden X Grid cellular paving system can be filled with grass or gravel, then driven over, parked on and walked on whilst
More informationUPRR INDUSTRIAL LEAD BRIDGE T-WALL RETAINING WALL SYSTEM 5.0 x 7.5 UNITS DESIGN UNIT 018 WORK PACKAGE 04
UPRR INDUSTRIAL LEAD BRIDGE T-WALL RETAINING WALL SYSTEM 5.0 x 7.5 UNITS DESIGN UNIT 018 WORK PACKAGE 04 1. Description This work shall consist of the design, manufacture and construction of a T-WALL structure
More information