Standard test method for organic impurities in fine aggregates for concrete. Standard test method for chemical analysis of hydraulic cement
|
|
|
- Arthur Glenn
- 5 years ago
- Views:
Transcription
1 IAS Accreditation Number TL-454 Company Name (QEL)- Foreign Branch Address Shed-9, Building-2189, Road-1529, Block 115 P.O. Box Hidd Kingdom of Bahrain Contact Name Sreekala Prabasankar, Technical Manager Telephone Effective Date of Scope February 15, 2017 Accreditation Standard ISO/IEC 17025:2005 Chemical ASTM C40/C40M ASTM C114 ASTM C1152/C1152M ASTM C1218/C1218M ASTM G57 06 BS BS BS BS BS EN Standard test method for organic impurities in fine aggregates for concrete Standard test method for chemical analysis of hydraulic cement Standard test method for acid-soluble chloride in mortar and concrete Standard test method for water-soluble chloride in mortar and concrete Standard test method for field measurement of soil resistivity using the Wenner four-electrode method Testing aggregates - method for determination of water soluble chloride salts (appendix C only) Testing aggregates - methods for determination of sulphate content (test 8 only) Methods of test for soils civil engineering purposeschemical and electro-chemical tests (clauses 3, 5.5, 6, 7.2, 7.3 and 8 only) Testing concrete- methods for analysis of hardened concrete (tests 10.2 and 10.3) Method of testing cement- chemical analysis of cement International Accreditation Service, Inc Saturn Street, Suite 100, Brea, California U.S.A Telephone IASInfo@iasonline.org Page 1 of 8
2 BS EN BS EN HACH 8039 HACH 8153 HACH 8167 HACH 8185 HACH 8507 HACH 8131 Tests for chemical properties of aggregates chemical analysis Determination of carbonation depth in hardened concrete by the phenolphthalein method Nitrate (cadmium reduction method) Nitrite (ferrous sulfate method) Total Chlorine (USEPA DPD method) Silica, high range (0 to 75.0 mg/l) (silicomolybdate method) Nitrite (USEPA diazotization method) Sulfide (USEPA methylene blue method) IWPT-97 Based on BS EN 1008 SMEWW 2320 Alkalinity (method B) SMEWW 2340 Hardness (method C) SMEWW 2510 Conductivity (method B) SMEWW 2540 Solids (methods B, C and D) SMEWW 3500-Ca Calcium (method B) SMEWW 3500-Fe Iron (method B) SMEWW 3500-Mg Magnesium (method B) SMEWW 4500-Cl Chlorine (residual) (method B and G) SMEWW 4500-H+ ph value (method B) SMEWW 4500-NH3 Nitrogen (ammonia) (method B and C) SMEWW 4500-P Phosphorus (method E) SMEWW 4500-S2 Sulfide (method D) SMEWW 4500-SO42 Sulfate (method E) SMEWW 5210 Biochemical oxygen demand (BOD) (method B) SMEWW 5220 Chemical oxygen demand (COD) (method D) CMT ASTM C39/C39M Standard test method for compressive strength of cylindrical concrete specimens TL-454 Page 2 of 8
3 ASTM C78/C78M ASTM C88 ASTM C127 ASTM C128 ASTM C131/C131M ASTM C136/C136M ASTM C138/C138M ASTM C140/C140M ASTM C142/C142M ASTM C143/C143M ASTM C172/C172M ASTM C231/C231M ASTM C232/C232M ASTM C293/C293M ASTM C403/C403M ASTM C469/C469M 14 Standard test method for flexural strength of concrete (using simple beam with third-point loading) Standard test method for soundness of aggregates by use of sodium sulfate or magnesium sulfate Standard test method for relative density (specific gravity) and absorption of coarse aggregate Standard test method for relative density (specific gravity) and absorption of fine aggregate Standard test method for resistance to degradation of small-size coarse aggregate by abrasion and impact in the Los Angeles machine Standard test method for sieve analysis of fine and coarse aggregates Standard test method for density (unit weight), yield, and air content (gravimetric) of concrete Standard test methods for sampling and testing concrete masonry units and related units Standard test method for clay lumps and friable particles in aggregates Standard test method for slump of hydraulic-cement concrete Standard practice for sampling freshly mixed concrete Standard test method for air content of freshly mixed concrete by the pressure method Standard test method for bleeding of concrete Standard test method for flexural strength of concrete (using simple beam with center-point loading) Standard test method for time of setting of concrete mixtures by penetration resistance Standard test method for static modulus of elasticity and Poisson s ratio of concrete in compression ASTM C494/C494M 16 Standard specification for chemical admixtures for concrete (clause 18.3) ASTM C496/C496M Standard test method for splitting tensile strength of cylindrical concrete specimens TL-454 Page 3 of 8
4 ASTM C535 ASTM C642 Standard test method for resistance to degradation of large-size coarse aggregate by abrasion and impact in the Los Angeles machine Standard test method for density, absorption, and voids in hardened concrete ASTM C876 Standard test method for corrosion potentials of uncoated reinforcing steel in concrete ASTM C1064/C1064M Standard test method for temperature of freshly mixed hydraulic cement concrete ASTM C1202 Standard test method for electrical indication of concrete s ability to resist chloride ion penetration ASTM D1557 Standard test methods for laboratory compaction characteristics of soil using modified effort (56,000 ft-lbf/ ft3 (2,700 kn-m/m3)) ASTM D ASTM D5731 ASTM D6938 ASTM D7012 BS BS BS BS BS BS Standard test method for determination of thermal conductivity of soil and soft rock by thermal needle probe procedure Standard test method for determination of the point load strength index of rock and application to rock strength classifications Standard test methods for in-place density and water content of soil and soil-aggregate by nuclear methods (shallow depth) Standard test methods for compressive strength and elastic moduli of intact rock core specimens under varying states of stress and temperatures Testing aggregates- methods for determination of density Testing aggregates- method for determination of particle size distribution Testing aggregates- methods for determination of particle shape- flakiness index Testing aggregates methods for determination of particle shape- elongation index of coarse aggregate Testing aggregate method for determination of shell content in coarse aggregate Testing aggregates methods for determination of moisture content TL-454 Page 4 of 8
5 BS Testing aggregates- methods for determination of aggregate crushing value (ACV) BS Testing aggregates- methods for determination of ten per cent fines value (TFV) BS Testing aggregates- method for determination of aggregate impact value (AIV) BS Testing aggregates method for determination of soundness BS Methods of test for soils for civil engineering purposes classification tests (clauses 3.2, 4.3, 5.3, 6.5, 8.2, 9.2, 9.3 and 9.5 only) BS Methods of test for soils for civil engineering purposescompaction-related tests (clauses 3.3, 3.4, 3.5, 3.6 and 7 only) BS Methods for test for soils for civil engineering purposes - in-situ tests (clauses 2.1, 2.2, 2.5, 4.1 and 5.1 only) BS BS Testing concrete- method for determination of slump Testing concrete - method for making test cubes from fresh concrete BS Testing concrete - method for determination of compressive strength of concrete cubes BS BS BS BS BS BS BS Testing concrete - method for determination of the compressive strength of concrete cores Testing concrete- method for determination of water absorption Testing concrete - guide to use of non destructive methods of test for hardened concrete Testing concrete- recommendations for surface hardness testing by rebound hammer Testing concrete- recommendations on the use of electromagnetic cover meters Testing concrete- recommendations for the determination of the initial surface absorption of concrete Precast concrete masonry units- guide for specifying precast concrete masonry units TL-454 Page 5 of 8
6 BS BS :2002+A1:2013 BS EN 446 BS EN BS EN Precast concrete paving blocks - specification for paving blocks Pendulum test value method of operation Grout for prestressing tendons- grouting procedures Methods of test for masonry units determination of compressive strength Methods of test for masonry units- determination of water absorption of aggregate concrete, autoclaved aerated concrete, manufactured stone and natural stone masonry units due to capillary action and the initial rate of water absorption of clay masonry units BS EN Tests for geometrical properties of aggregatesdetermination of particle size distribution- sieving method BS EN Tests for geometrical properties of aggregates determination of shell content- percentage of shells in coarse aggregates BS EN Tests for mechanical and physical properties of aggregates- determination of particle density and water absorption BS EN :2009 Tests for mechanical and physical properties of aggregates - determination of the polished stone value BS EN 1338 BS EN 1339 BS EN 1340 Concrete paving blocks requirements and test methods Concrete paving flags requirements and test methods Concrete Kerb units requirements and test methods BS EN :2008 Tests for thermal and weathering properties of aggregates - determination of drying shrinkage BS EN 1926 BS EN BS EN BS EN BS EN Natural stone test methods determination of uniaxial compressive strength Testing hardened concrete- making and curing specimens for strength tests Testing hardened concrete- compressive strength of test specimens Testing hardened concrete- flexural strength of test specimens Testing hardened concrete- tensile splitting strength of test specimens TL-454 Page 6 of 8
7 BS EN BS EN BS EN BS EN IWPT- 109 IWPT-184 Testing hardened concrete- density of hardened concrete Testing concrete in structures- cored specimens- taking, examining and testing in compression Testing fresh concrete- slump-test Testing fresh concrete- density Temperature monitoring in concrete aggregates/rock Determination of settlement characteristics of soil for lightly loaded foundation by the shallow pad maintained load test (zone load test) based on BS :1990 clause 4.2 Physical ASTM A90/A90M-13 Standard test method for weight [mass] of coating on iron and steel articles with zinc or zinc-alloy coatings ASTM D1143/1143M-07 Test method for deep foundations under axial compressive load ASTM D2172/D2172M ASTM D2584 ASTM D2726/D2726M Standard test methods for quantitative extraction of bitumen from bituminous paving mixtures Standard test method for ignition loss of cured reinforced resins Standard test method for bulk specific gravity and density of non-absorptive compacted bituminous mixtures ASTM D3549/D3549M Standard test method for thickness or height of compacted bituminous paving mixtures specimens ASTM D4138 ASTM D5882 ASTM D Standard practices for measurement of dry film thickness of protective coating systems by destructive, crosssectioning means Standard test method for low strain impact integrity testing of deep foundations Standard test method for integrity testing of concrete deep foundations by ultrasonic crosshole testing ASTM D6926 Standard practice for preparation of bituminous specimens using Marshall apparatus ASTM D6927 Standard test method for Marshall stability and flow of asphalt mixtures TL-454 Page 7 of 8
8 ASTM D7234 BS EN 124 BS EN BS EN :2004 Standard test method for pull-off adhesion strength of coatings on concrete using portable pull-off adhesion testers CE marking for gully and manhole tops Plywood - specification for moisture content Testing concrete - determination of ultrasonic pulse velocity in concrete IWPT-91 Density and moisture content of wood based on BS 4978 and IWPT-183 NACE recommended practice for testing of protective coatings based on ASTM standards D5162 and G62-14 HACH- Hach Company IWPT- In-house Work Procedure for Testing SMEWW- Standard Methods for the Examination of Water and Wastewater TL-454 Page 8 of 8
Accredited Laboratory
Accredited Laboratory A2LA has accredited PIONEER LABORATORY Doha, Qatar for technical competence in the field of Construction Materials Testing This laboratory is accredited in accordance with the recognized
Following are key codes & standards to remember for Civil Estimators to prepare the tender/bid proposal in correct manner.
CODES & STANDARDS FOR ON-SITE TESTING LABORATORY Following are key codes & standards to remember for Civil Estimators to prepare the tender/bid proposal in correct manner. Codes & Standards are published
IAS Accreditation Number Pacific Testing and Inspection, Inc. Address 2417, Harrison Avenue, Centralia, WA 98531
IAS Accreditation Number TL-779 Company Name Address 2417, Harrison Avenue, Centralia, WA 98531 Contact Name Tim A. Barney, President Telephone (360) 736-3922 Effective Date of Scope November 30, 2017
1997 UBC Standard Test method for compressive strength of masonry prisms
IAS Accreditation Number TL-196 Company Name Address 3310 Airport Way Long Beach, California 90806 Contact Name Steve Crumb Lab Manager Telephone (562) 426-3355 Effective Date of Scope April 20, 2017 Accreditation
IAS Accreditation Number Materials Testing and Inspection 2791 South Victory View Way Boise, Idaho 83709
IAS Accreditation Number Company Name Inspection Address 2791 South Victory View Way Boise, Idaho 83709 Contact Name Elizabeth Brown, P.E. Corporate Quality Manager Telephone (208) 376-4748 Effective Date
LIST OF DAC (17025) ACCREDITED TESTS CONSTRUCTION MATERIALS TESTING. Determination of sulphate content of soil and ground water testing
LIST OF DAC (17025) ACCREDITED TESTS CONSTRUCTION MATERIALS TESTING WATER: Material / Product Description Chemical Water Determination of ph Value 02 Chemical Water Determination of sulphate content of
United-Heider Inspection Group Goldencrest Drive, Suite 114, Moreno Valley, CA 92553, USA Martin Lowenthal, General Manager
IAS Accreditation Number Company Name Address Contact Name Telephone +1 (951) 697-4777 Effective Date of Scope August 28, 2017 Accreditation Standard ISO/IEC 17025:2005 CMT TL-699 22620 Goldencrest Drive,
Flood Testing Laboratories, Inc.
in Chicago, Illinois, USA has demonstrated proficiency for the testing of construction materials and has conformed to the requirements established in AASHTO R 18 and the AASHTO Accreditation policies established
Standard Testing & Engineering, LLC
Standard Testing & Engineering, LLC dba Standard Testing & Engineering Company in Oklahoma City, Oklahoma, USA has demonstrated proficiency for the testing of construction materials and has conformed to
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005. CARLSON TESTING, INC Hudson Avenue, NE Salem, OR James Hathaway, PE Phone:
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 CARLSON TESTING, INC. 4060 Hudson Avenue, NE Salem, OR 97301 James Hathaway, PE Phone: 503 589 1252 Valid To: January 31, 2020 Certificate Number: 0258.03 In
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 PROFESSIONAL SERVICE INDUSTRIES, INC. 3011 South Huson Street, Suite A Tacoma, WA 98409 Eric Allen Phone: 253 589 1804 Valid To: December 31, 2019 Certificate
STRATA Certified Laboratory Tests
STRATA Certified Laboratory Tests Table 1. List of Certified Soil Tests 1 ASTM D 422 Standard Test Method for Particle-Size Analysis of Soils 2 ASTM D 698-12 Standard Test Method for Compaction Characteristics
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 OTTO ROSENAU & ASSOCIATES, INC. 6747 Martin Luther King Jr. Way S. Seattle, WA 98118 Judi Rosenau-Payseno Phone: 206 725 4600 Valid To: February 28, 2019 Certificate
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 PROFESSIONAL SERVICE INDUSTRIES, INC. PORTLAND, OREGON DIVISION 6032 N Cutter Circle, Suite #480 Portland, OR 97217 Joseph A. Morrissey, PE Phone: 503 289 1778
LABORATORY INSPECTION INFORMATION REQUEST
LABORATORY INSPECTION INFORMATION REQUEST This information will assist in the processing of laboratory inspections. The inspection is a two-man day comprehensive review that includes review of the quality
Laboratory Certification For. Delta Afghan Technical Engineering Services (DATES)
Laboratory Certification For Delta Afghan Technical Engineering Services (DATES) Lab ID: LCP-026 Issue date: Jan 6 th, 2019 Expiry date: July 5 th, 2019 This letter confirms the completion of inspection
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005. TEAM SERVICES, INC. 717 SE 6 th Street Des Moines, IA Jeff Roberts Phone:
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 TEAM SERVICES, INC. 717 SE 6 th Street Des Moines, IA 50309 Jeff Roberts Phone: 515 282 8818 Valid To: April 30, 2019 Certificate Number: 0576.01 In recognition
Nelson Testing Laboratories
in Elmhurst, Illinois, USA has demonstrated proficiency for the testing of construction materials and has conformed to the requirements established in AASHTO R 18 and the AASHTO Accreditation policies
CEMENT AND CONCRETE RELATED STANDARDS. Updated in May 2018 CONCRETE STANDARDS DESIGN AND EXECUTION STANDARDS MANAGEMENT SYSTEMS STANDARDS
CEMENT AND CONCRETE RELATED S Updated in May 2018 CONCRETE S BS EN 206 +A1:2016 BS 8500-1:2015 +A1:2016 BS 8500-2:2015 +A1:2016 Concrete Specification, performance, production and conformity Concrete Complementary
Laboratory Certification For. Build Afghanistan Engineering Services (BAES) Laboratory
Laboratory Certification For Build Afghanistan Engineering Services (BAES) Laboratory Lab ID: LCP-017 Issue date: Oct 5, 2016 Expiry date: April 4, 2017 This Extension letter confirms the completion of
Pennoni Associates, Inc.
in Bethlehem, Pennsylvania, USA has demonstrated proficiency for the testing of construction materials and has conformed to the requirements established in AASHTO R 18 and the AASHTO Accreditation policies
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 NORTHWEST GEOTECH, INC. d/b/a NORTHWEST TESTING, INC. 9120 SW Pioneer Court, Suite B Wilsonville, OR 97070 Thomas Ginsbach, P.E. Phone: 503 682 1880 Valid To:
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005. HTS, INC. CONSULTANTS 416 Pickering Houston, TX Terry J. Jackson, P.E. Phone:
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 HTS, INC. CONSULTANTS 416 Pickering Houston, TX 77206 Terry J. Jackson, P.E. Phone: 713 692 8373 Valid To: October 31, 2018 Certificate Number: 0029.01 In recognition
Terracon Consultants, Inc.
in College Station, Texas, USA has demonstrated proficiency for the testing of construction materials and has conformed to the requirements established in AASHTO R 18 and the AASHTO Accreditation policies
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 TOLUNAY-WONG ENGINEERS, INC 10710 Sam Houston Parkway West, Suite 100 Houston, TX 77031 Patricia Hodgkins Phone: 504 202 7541 Valid To: February 29, 2020 Certificate
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005. QC LABORATORIES, INC Northwest Freeway Houston, TX Damon Dolat Phone:
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 QC LABORATORIES, INC. 10810 Northwest Freeway Houston, TX 77092 Damon Dolat Phone: 713 695 1133 Valid to: July 31, 2018 Certificate Number: 1127.01 In recognition
Laboratory Certification For. Reno Geotech & Construction Material Testing Company
Laboratory Certification For Reno Geotech & Construction Material Testing Company Lab ID: LCP-011 Issue date: June 10 th, 2018 Expiry date: Dec 9 th, 2018 This letter confirms the completion of inspection
Wiss, Janney, Elstner Associates, Inc.
in Northbrook, Illinois, USA has demonstrated proficiency for the testing of construction materials and has conformed to the requirements established in AASHTO R 18 and the AASHTO Accreditation policies
LIST OF TESTING SERVICES
Soil 1 In-situ Density by Sand Replacement Method Using Large / Small Pouring Cylinder BS 1377 Part 9 2 In-place Density Test by Sand Cone Method ASTM D 1556 3 In-situ Density Test Using Nuclear Densitometer
FHWA-Central Federal Lands Highway Division
in Denver, Colorado, USA has demonstrated proficiency for the testing of construction materials and has conformed to the requirements established in AASHTO R 18 and the AASHTO Accreditation policies established
Discipline Mechanical Testing Issue Date Certificate Number T-1169 Valid Until Last Amended on
Last Amended on 08.06.2015 Page 1 of 8 I. MECHANICAL PROPERTIES OF MATERIALS 1. Reinforcing Bar Nominal mass of HSD rebar IS 1786: 2008 (RA 2013) 0.075 kg/m to 15 kg/m Tensile Test of HSD rebar 2. Strands
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 GEOTECH ENGINEERING AND TESTING, INC. 17407 Highway 59 North Humble, TX 77396 Andrie Fruel, P.E. Phone: 713 699 4000 Valid To: December 31, 2019 Certificate
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 GORRONDONA ENGINEERING SERVICES, INC. 4641 Kennedy Commerce Drive Houston, TX 77032 Corey Ritter Phone: 281 469 3347 Valid To: August 31, 2020 Certificate Number:
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 GORRONDONA ENGINEERING SERVICES, INC. 4641 Kennedy Commerce Drive Houston, TX 77032 Corey Ritter Phone: 281 469 3347 Valid To: August 31, 2020 Certificate Number:
GeoTesting Express, Inc.
in Acton, Massachusetts, USA has demonstrated proficiency for the testing of construction materials and has conformed to the requirements established in AASHTO R 18 and the AASHTO Accreditation policies
JAZAN UNIVERSITY. CIVIL ENGINEERING DEPARTMENT Equipments and Devices of the Concrete Laboratory
JAZAN UNIVERSITY College of Engineering CIVIL ENGINEERING DEPARTMENT Equipments and Devices of the Concrete Laboratory The Equipment The Purpose To determination of compressive strength of samples Bricks,
PAVETEX Engineering, LLC
in El Paso, Texas, USA has demonstrated proficiency for the testing of construction materials and has conformed to the requirements established in AASHTO R 18 and the AASHTO Accreditation policies established
2501 PART V SECTION 2501 PART V
SECTION 2501 PART V 2501.1 GENERAL In order to properly monitor materials on a project, follow all applicable procedures as outlined in the KDOT Construction Manual, Part V. This includes, but is not limited
DIVISION 2500 MISCELLANEOUS METHODS OF TEST
TABLE OF CONTENTS DIVISION 2500 MISCELLANEOUS METHODS OF TEST SECTION 2501 PART V... 2500-1 PAGE i SECTION 2501 PART V 2501.1 GENERAL In order to properly monitor materials on a project, follow all applicable
CERTIFICATE OF ACCREDITATION
CERTIFICATE OF ACCREDITATION In terms of section 22(2) (b) of the Accreditation for Conformity Assessment, Calibration and Good Laboratory Practice Act, 2006 (Act 19 of 2006), read with sections 23(1),
From: Samaniego, Eric E@DOT Date: Tue, Jul 1, 2014 at 8:38 AM Subject: FW: FW: City of Los Angeles 2014 QAP To: "ray.solomon@lacity.org" Cc: "Kumar,
DIVISION 2500 MISCELLANEOUS METHODS OF TEST
TABLE OF CONTENTS DIVISION 2500 MISCELLANEOUS METHODS OF TEST SECTION 2501 PART V... 2500-1 PAGE i SECTION 2501 PART V 2501.1 GENERAL In order to properly monitor materials on a project, follow all applicable
Laboratory Certification For. National Engineering Services for Rehabilitation of Afghanistan (NESRA)
Laboratory Certification For National Engineering Services for Rehabilitation of Afghanistan (NESRA) Lab ID: LCP-004 Issue date: Feb 15 th, 2018 Expiry date: Aug 14 th, 2018 This extension letter confirms
FHWA-Western Federal Lands Highway Division
in Vancouver, Washington, USA has demonstrated proficiency for the testing of construction materials and has conformed to the requirements established in AASHTO R 18 and the AASHTO Accreditation policies
Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK
2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK Prime Parkway Contact: Mr M Barham Prime Enterprise Park Tel: +44 (0)1332 383333 Derby Fax: +44 (0)1332 602607 DE1 3QB E-Mail: mike.barham@kiwa.co.uk
Accredited Laboratory
Accredited Laboratory A2LA has accredited Houston, TX for technical competence in the field of Construction Materials Testing This laboratory is accredited in accordance with the recognized International
PROGRAMME OF WORK : STANDARDS
Report : 09-0- Of 7 08 08/SC 0 470 (SABS 470) 4.0 Concrete poles for telephone, power and lighting purposes 08-08-0 508.0 Concrete retaining blocks 08-08-0 54 (SABS 54) 4.0 Concrete roofing tiles 08-08-0
Seattle Public Utilities Materials Laboratory
in Seattle, Washington, USA has demonstrated proficiency for the testing of construction materials and has conformed to the requirements established in AASHTO R 18 and the AASHTO Accreditation policies
Standard test method for compressive strength of cylindrical concrete specimens. Standard test method for flexural strength of hydrauliccement
IAS Accreditation Number Company Name Address TL-228 Specialized Testing, Inc. 10600 Pioneer Boulevard, Suite G Santa Fe Springs, California 90670 Martin Mejia, Technical Manager Contact Name Telephone
KANSAS DEPARTMENT OF TRANSPORTATION SPECIAL PROVISION TO THE STANDARD SPECIFICATIONS, EDITION 2007
Sheet 1 of 6 KANSAS DEPARTMENT OF TRANSPORTATION SPECIAL PROVISION TO THE STANDARD SPECIFICATIONS, EDITION 2007 Delete SECTION 2501 and replace with the following: SECTION 2501 PART V 2501.1 GENERAL In
(DEPARTMENT OF CIVIL ENGINEERING)
CONSULTANCY & MATERIAL TESTING SERVICES (DEPARTMENT OF CIVIL ENGINEERING) VNR VIGNANA JYOTHI INSTITUTE OF ENGINEERING & TECHNOLOGY Bachupally, Nizampet( S.O.),Hyderabad -500 090 Phone: 040-23042758/59/60
Accredited Laboratory
Accredited Laboratory A2LA has accredited (FORMERLY KNOWN AS GORRONDONA & ASSOCIATES, INC.) Houston, TX for technical competence in the field of Geotechnical Testing This laboratory is accredited in accordance
Fundamentals of Concrete
Components Cement Water Fine Aggregate Coarse Aggregate Fundamentals of Range in Proportions Advantages of Reducing Water Content: Increased strength Lower permeability Fundamentals of Increased resistance
CONCRETE MATERIALS PROPERTIES AND TESTING
CONCRETE MATERIALS PROPERTIES AND TESTING 1 Concrete ingredients Cement Fine aggregate Coarse aggregate Water Admixtures 2 3 4 Properties of cement Physical properties of cement Fineness Standard consistency
Geotech Services, X-18, MIDC, Hingna, Nagpur, Maharashtra. Discipline Mechanical Testing Issue Date
Last Amended on 11.01.2014 Page 1 of 14 I. BUILDING MATERIALS 1. Soil / Rock Plate Load Test IS 1888 1982 (Reaffirmed-2007) Cyclic Plate Load Test IS 5249 1992 Clause 6 (Reaffirmed-2010) Load Test On In-Situ
Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK
Schedule of ccreditation United Kingdom ccreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK shghal Centre for Research and Development ccredited to l Najma Street number
DEPARTMENT OF THE ARMY U.S. ARMY CORPS OF ENGINEERS AFGHANISTAN ENGINEER DISTRICT - SOUTH APO AE 09355
DEPARTMENT OF THE ARMY U.S. ARMY CORPS OF ENGINEERS AFGHANISTAN ENGINEER DISTRICT - SOUTH APO AE 09355 REPLY TO ATTENTION OF USACE-EC-TSB 1 June 2013 (Expiration: 2 June 2015) 2013 INSPECTION AND CERTIFICATION
Radhey Testing & Consultants Pvt. Ltd., B-363, Kalindi Vihar, Agra, Uttar Pradesh. Discipline Mechanical Testing Issue Date
Last Amended on - Page 1 of 10 I. BUILDING MATERIALS 1. Aggregates (Coarse & Fine) Sieve Analysis IS 2386 (Part 1) 1963 (RA 2002) 4.75 mm to 100 mm 0.150 to 4.75 Specific Gravity IS 2386 (Part 3) 1963
KANSAS DEPARTMENT OF TRANSPORTATION SPECIAL PROVISION TO THE STANDARD SPECIFICATIONS, 2015 EDITION
Sheet 1 of 6 KANSAS DEPARTMENT OF TRANSPORTATION SPECIAL PROVISION TO THE STANDARD SPECIFICATIONS, 2015 EDITION Delete SECTION 2501 and replace with the following: SECTION 2501 PART V 2501.1 GENERAL In
Oklahoma DOT Central Laboratory Test List
Aggregate Count of Tests: 21 Aggregate Durability Index 00091 T210 AR Bulk Density and Voids 00086 T19 AR Clay Lumps and Friable Particles 00080 T112 AR OHDL9-OHDL38 Dust Coating of Cover Aggregates 00149
Special Provision No. 199S64 July 2016
GENERAL REQUIREMENTS FOR REFEREE TESTING Special Provision No. 199S64 July 2016 1.0 Scope This Special Provision describes the common requirements for referee testing related to laboratory and field testing
PRI Asphalt Technologies, Inc.
in Tampa, Florida, USA has demonstrated proficiency for the testing of construction materials and has conformed to the requirements established in AASHTO R 18 and the AASHTO Accreditation policies established
Method of Test For In-Place Density of Treated and Untreated Soils and Aggregates
Rev. 04-12-17 Aggregates and Soils T102H T103G T104D T106B T107B T108C T111D T112F T115D T116A T200E T203G T206G T209C T210J T211J& T212J T224C T227I T228C T230D T235B Method of Test For In-Place Density
National Accreditation Board for Testing and Calibration Laboratories. (A Constituent Board of Quality Council of India) CERTIFICATE OF ACCREDITATION
(? (A Constituent Board of uality Council of India) C I CERTIFICATE OF ACCREDITATION M.E. TESTING LABORATORY has been assessed and accredited in accordance with the standard ISO/IEC 17025:2005 "General
Standard Test Method for Bulk Density ( Unit Weight ) and Voids in Aggregate
IAS Accreditation Number Company Name Address TL-292 401 E. Fourth St., Bldg. 12B Bridgeport, PA 19405 Thomas Smith, Laboratory Manager Contact Name Telephone +1 (610) 313-3227 Effective Date of Scope
CERTIFICATE OF ACCREDITATION
CERTIFICATE OF ACCREDITATION In terms of section 22(2) (b) of the Accreditation for Conformity Assessment, Calibration and Good Laboratory Practice Act, 2006 (Act 19 of 2006), read with sections 23(1),
(Please complete the application, print, sign and date. Mail to CMEC at 2779 Apopka Blvd, Ste 1, Apopka, FL 32703)
CMEC, Inc. LABORATORY ACCREDITATION APPLICATION STEP 1 LABORATORY INFORMATION BILLING INFORMATION: Laboratory: Mailing Address: City/State/Zip: Phone: Fax: Contact Person: Email Address: PHYSICAL INFORMATION:
(Please complete the application, print, sign and date. Mail to CMEC at 2779 Apopka Blvd, Ste 1, Apopka, FL 32703)
CMEC, Inc. LABORATORY ACCREDITATION APPLICATION STEP 1 LABORATORY INFORMATION BILLING INFORMATION: Laboratory: Mailing Address: City/State/Zip: Phone: Fax: Contact Person: Email Address: PHYSICAL INFORMATION:
Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK
chedule of Accreditation 2 Pine Trees, Chertsey Lane, taines-upon-thames, TW18 3HR, UK 5 Churchill Place Canary Wharf London E14 5HU Contact: Mr G P Booker Tel: +44 (0)20 38102416 Fax: +44 (0)20 7216 6950
Course Concrete Technology Course Code Theory Term Work POE Total Max. Marks Contact Hours/ week
Course Concrete Technology Course Code 43588 Examination Scheme Theory Term Work POE Total Max. Marks 100 50 -- 150 Contact Hours/ week 3 2 -- 5 Prepared by Mr. C.S. Patil / Mr. S.P. Patil Date Prerequisites
This annex is valid from: to Replaces annex dated: Location(s) where activities are performed under accreditation
This annex is valid from: 16-08-2017 to 01-08-2020 Replaces annex dated: 23-05-2016 Vlamoven 41 6826 TM Arnhem The Netherlands Location(s) where activities are performed under accreditation Head Office
Investigations on Some Properties of no-fines Concrete
Investigations on Some Properties of no-fines Concrete T ABADJIEVA and P SEPHIRI Department of Civil Engineering University of Botswana Private Bag 1 Gaborone, Botswana Abstract No-fines concrete is a
Raicon Labs Pvt. Ltd., Plot No. 140, HSIIDC, Rai Industrial Area, Sonepat, Haryana. Discipline Mechanical Testing Issue Date
Last Amended on - Page 1 of 9 I. BUILDING MATERIALS 1. Cement Fineness by Blain Air Permeability IS 4031 (Part 2): 1999 (RA 2013) 100 m 2/ kg to 500 m 2/ kg Consistency IS 4031 (Part 4): 1988 (RA 2014)
USAGE OF C&D WASTE IN CONCRETE AS A REPLACEMENT OF NATURAL AGGREGATE
USAGE OF C&D WASTE IN CONCRETE AS A REPLACEMENT OF NATURAL AGGREGATE ABSTRACT Nikhil Kaushik & V V Arora National Council for Cement and Building Materials, India Construction and demolition (C&D) waste
Discipline Mechanical Testing Issue Date Certificate Number T-2522 Valid Until Last Amended on - Page 1 of 13
Bureau Veritas (India) Pvt. Ltd. - Construction Services, Last Amended on - Page 1 of 13 I. MECHANICAL PROPERTIES OF MATERIALS 1. Steel Reinforcement Weight/meter IS 1786: 2008 (RA 2013) 0.1 kg to 20 kg
Geotechnics, Inc. East Pittsburgh, Pennsylvania, USA
in East Pittsburgh, Pennsylvania, USA has demonstrated proficiency for the testing of construction materials and has conformed to the requirements established in AASHTO R 18 and the AASHTO Accreditation
This annex is valid from: to Replaces annex dated: Location(s) where activities are performed under accreditation
Annex to declaration accreditation (scope accreditation) Location(s) where activities are performed under accreditation Head Office Vlamoven 41 6826 TM Arnhem The Netherlands Location Abbreviation/ location
Exclusive Services for Infrastructure / Civil Sector
Exclusive Services for Infrastructure / Civil Sector Introduction Spectro Analytical Labs is pioneer in providing Material, Inspection, Non Destructive analysis of various structures. Spectro provides
SUITABILITY OF SINTERED FLY ASH LIGHTWEIGHT AGGREGATE IN STRUCTURAL CONCRETE
ABSTRACT SUITABILITY OF SINTERED FLY ASH LIGHTWEIGHT AGGREGATE IN STRUCTURAL CONCRETE V V Arora, P N Ojha & Mantu Gupta National Council for Cement and Building Materials, India The paper presents the
Beyond Engineering & Testing, LLC.
in Round Rock, Texas, USA has demonstrated proficiency for the testing of construction materials and has conformed to the requirements established in AASHTO R 18 and the AASHTO Accreditation policies established
SCHEDULE OF FEES 2016P PROFESSIONAL SERVICES Page 1 of 4
SCHEDULE OF FEES 2016P PROFESSIONAL SERVICES Page 1 of 4 PROFESSIONAL SERVICES Principal Engineer / Geologist $160.00 per hour Senior Engineer / Geologist $160.00 per hour Senior Environmental Scientist
Department of Civil Engineering. Consultancy Experiments and Charges
Department of Civil Engineering Consultancy Experiments and Charges TRANSPORTATION ENGINEERING LABORATORY Rate Per Test (Rs.) S.N0. Test Name Proposed = Existing existing *1.5 1 CBR @ Field moisture Contents
Utilization of micro silica as partial replacement of OPC & SRC in concrete
International Refereed Journal of Engineering and Science (IRJES) ISSN (Online) 2319-183X, (Print) 2319-1821 Volume 3, Issue 3(March 2014), PP.67-73 Utilization of micro silica as partial replacement of
CERTIFICATE OF ACCREDITATION
CERTIFICATE OF ACCREDITATION In terms of section 22(2) (b) of the Accreditation for Conformity Assessment, Calibration and Good Laboratory Practice Act, 2006 (Act 19 of 2006), read with sections 23(1),
SPECIFICATIONS FOR FABRICATION OF PRECAST CONCRETE PANELS
SPECIFICATIONS FOR FABRICATION OF PRECAST CONCRETE PANELS 1.0 DESCRIPTION The Work shall consist of:.1 The supply of materials and the fabrication of precast concrete panels as shown and described on the
Advanced Structures and Composites Center, University of Maine 35 Flagstaff Road Orono, Maine Benjamin Herzog, Quality Manager
IAS Accreditation Number Company Name Address Contact Name Telephone (207) 581-2360 Effective Date of Scope November 16, 2018 Accreditation Standard ISO/IEC 17025:2005 Fire TL-255 Composites Center, University
Registration for Experimental Work
University of Malta Faculty for the Built Environment Department of Civil and Structural Engineering Registration for Experimental Work Name of Researcher / Student: Telephone number: Mobile number: Email
Use of Brick Masonry from Construction and Demolition Waste as Aggregates in Concrete
Use of Brick Masonry from Construction and Demolition Waste as Aggregates in Concrete Tara Cavalline, PE and David C. Weggel, Ph.D., PE UNC Charlotte 2012 International Concrete Sustainability Conference
Handbook for Concrete and Cement Table of Contents Issued 1 September 1997 (updated December 2002)
Handbook for Concrete and Cement Table of Contents Issued 1 September 1997 (updated December 2002) Standards and Specifications that are dual CRD-C and ASTM or ACI may be obtained from those organizations.
Schedule of Accreditation Issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK
Issued by 2 Pine Trees, Chertsey Lane, taines-upon-thames, TW18 3HR, UK Materials Testing Division Contact: Ben Roper Northdown House Tel: +44 (0)1622 858545 Ashford Road Fax: +44 (0)1622 858544 Harrietsham
The durability of normal strength concrete: an experimental study
Materials Characterisation VII 195 The durability of normal strength concrete: an experimental study V. Patel & N. Shah Civil Engineering Department, Charotar University of Science and Technology, India
STANDARD FOR MATERIALS FOR CONCRETE, MORTARS & ADMIXTURES
STANDARD FOR MATERIALS FOR CONCRETE, MORTARS & ADMIXTURES 1 IPS-M-CE-165 CONTENTS : PAGE No. 1. SCOPE... 3 2. REFERENCES... 3 3. DEFINITIONS AND TERMINOLOGY... 4 4. UNITS... 4 5. CONCRETE MATERIALS...
Advanced Structures and Composites Center, University of Maine 35 Flagstaff Road Orono, Maine Benjamin Herzog, Quality Manager
IAS Accreditation Number Company Name Address Contact Name Telephone (207) 581-2360 Effective Date of Scope March 27, 2017 Accreditation Standard ISO/IEC 17025:2005 TL-255 Composites Center, University
Concrete Materials CIVL
Concrete Materials CIVL 3137 1 Concrete Ingredients Portland Cement Water Fine Aggregate Coarse Aggregate Supplementary Cementitious Materials Chemical Admixtures CIVL 3137 2 Important Aggregate Properties
Topic 1 - Properties of Concrete. 1. Quick Revision
Topic 1 - Properties of Concrete 1. Quick Revision 1.1 Constituent Materials of concrete Concrete is composed mainly of three materials, namely, cement, water and aggregate, and sometimes additional material,
AESCO, Inc. Huntington Beach, California, USA
in Huntington Beach, California, USA has demonstrated proficiency for the testing of construction materials and has conformed to the requirements established in AASHTO R 18 and the AASHTO Accreditation
EXPERIMENTAL INVESTIGATION OF WASTE FOUNDRY SAND ON STRENGTH PROPERTIES OF PLAIN CONCRETE AND COMPARISON WITH BINARY BLENDED CONCRETE
EXPERIMENTAL INVESTIGATION OF WASTE FOUNDRY SAND ON STRENGTH PROPERTIES OF PLAIN CONCRETE AND COMPARISON WITH BINARY BLENDED CONCRETE N RAHUL 1*, B BEERAIAH 2* 1. M.Tech-Student, Dept of CE, Velaga Nageswara
High Strength Concrete With Pond-Ash as Partially Replaced by Fine Aggregate and Fine Fly-Ash, Alccofine as Cement
GRD Journals Global Research and Development Journal for Engineering Recent Advances in Civil Engineering for Global Sustainability March 2016 e-issn: 2455-5703 High Strength Concrete With Pond-Ash as