Landscaping Guide Block Product Guide

Transcription

1 Landscaping Guide Block Product Guide Victoria Photographs depict items not supplied by Metricon namely: landscaping and planter boxes

2 100 Series Ash Grey Blocks Hollow 100mm Series 60 minutes fire rating (f uc = 10MPa FRL = 60(Srf 22.5)/60/60) 10.01AG* 12.0 kg 149 per pallet AG Three s 8.7 kg 10.03AG 5.7 kg 10.04AG (10.334) 3.5 kg 504 per pallet 10.12AG Bond Beam 9.1 kg Backup AG* Height Hollow 5.6 kg 300 per pallet 10.83AG* Height Solid 7.7 kg 234 per pallet AG* 10.1 kg 172 per pallet Scoria Blend Blocks Solid 100mm Series 180 minutes fire rating (f uc = 8MPa FRL = 180(Srf 21.5)/180/180) FR* Standard Solid 13.3 kg 139 per pallet FR Three 10.5 kg FR 6.8 kg FR 3.5 kg 504 per pallet 1

3 120 Series Scoria Blend Blocks Reduced Core 120mm Series 240 minutes fire rating (f uc = 8MPa FRL = 240(Srf 19.7)/240/240) FR Reduced Core 12.5 kg 1 in 5 universal for ½ or ¾, to bolster on site. 150 Series Ash Grey Blocks Hollow 150mm Series 60 minutes fire rating (f uc = 15MPa FRL = 60(Srf 22.5)/60/60) 15.01AG* 12.5 kg AG Three 10.0 kg 128 per pallet 15.03AG 7.2 kg 15.04AG (15.485) AG Corner Block 11.9 kg 15.71AG* Height Hollow 7.5 kg 216 per pallet 15.12AG Bond Beam 13.3 kg 2

4 150 Series Scoria Blocks Hollow 150mm Series 120 minutes fire rating (f uc = 8MPa FRL = 120(Srf 22.6)/120/120) 15.01FR* 11.0 kg FR Three 8.1 kg 128 per pallet Scoria Blend Blocks 15.03FR 5.6 kg 15.04FR (15.485) FR Corner Block 10.3 kg Cored 150mm Series 180 minutes fire rating (f uc = 12MPa FRL = 180(Srf 21.5)/180/180) Back-up FR* 12.5 kg FR Three 9.6 kg 128 per pallet FR 6.8 kg FR (15.485) FR Corner Block 11.0 kg FR 11.0 kg 162 Reduce Core 150mm Series 240 minutes fire rating (f uc = 8MPa FRL = 240(Srf 19.7)/240/240) FR* Reduced Core 15.3 kg FR Three 12.0 kg 128 per pallet FR 8.8 kg FR (15.485) FR Corner Block 13.6 kg Solid 150mm Series FR* Height Solid 9.8 kg FR 3

5 Series Ash Grey Blocks Hollow mm Series 60 minutes fire rating f uc = 15MPa FRL = 60(Srf 22.5)/60/60) 20.01AG* 15.5 kg per pallet AG Three 13.4 kg 20.03AG 8.9 kg 144 per pallet 20.04AG (10.03) 5.7 kg 20.12AG Lintel Bond Beam 18.0 kg 72 per pallet Removable centre, knock out on site AG* Height Hollow 7.0 kg 162 per pallet 50.31AG Capping 6.0 kg 216 per pallet. Scoria Blend Blocks Hollow mm Series 240 minutes fire rating (f uc = 8MPa FRL = 240(Srf 19.7)/240/240) FR 1 per pallet Bricks FR Three 13.0 kg FR 8.8 kg 144 per pallet FR (10.03) 5.7 kg Render Brick* 3.8 kg 450 per pallet 10 MPa Ash Grey 1 in every 7 bricks made is solid 230 Quick Brick* 6.8 kg 250 per pallet 8 MPa Scoria 4

6 Retaining wall/core fill blocks Ash Grey Blocks 150mm Series (f uc = 15MPa) 15.48AG* H Block 12.9 kg 15.42AG* Channel/Notch Block 12.8 kg mm Series (f uc = 15MPa) 1 in 3 closed end universal 20.48AG* H Block 13.2 kg per pallet 20.42AG* Channel/Notch Block 13.7 kg per pallet 20.20AG Biscuitless 13.0 kg per pallet 300mm Series AG* H Block 19.1 kg 60 per pallet f uc = 15MPa 20.02AG and End 13.4 kg FR End Closer/Capping 10.7 kg FR Insert/Closer 6.1 kg Connex Mortarless Block System mm Series Stretcher Unit* 13.8 kg 60 per pallet 400 End & Corner Unit 10.8 kg 60 per pallet Unit Capping 6.2 kg 100 per pallet

7 Designer Range Split Face Blocks 100mm Series (f uc = 8MPa) Standard Split Face 14.0 kg 1 in 6 universal for ½ or ¾, to bolster on site. All fractions are saw cut to order 10.26SP Split Corner 22.0 kg 80 per pallet Double Sill 7.9 kg 220 double units per pallet. Bolster on site Height 7.3 kg 216 per pallet Height 3.5 kg 432 per pallet mm Series mm Series Available Colours Standard Split Face 15.5 kg Smooth Face Blocks For the full range contact your National Masonry Representative Standard 12.0 kg 149 per pallet Full End 15.5 kg per pallet Height Hollow 5.6 kg 300 per pallet Capping 6.0 kg 216 per pallet Standard Split Face 20.7 kg per pallet Height 3.5 kg 432 per pallet Corner Return Solid 17.8 kg Product Disclaimer Split Corner 21.9 kg 72 per pallet kg Alabaster Almond Charcoal Paperbark Pearl Grey Sandstone Blend - only available in Split Face Sandune For more information or to request colour samples, please contact your representative. Four Innovative Textures Smooth Face A finely textured finish created through the standard moulding process. Honed Face Polished Face Split Face Concrete Blocks, Bricks, Pavers and Retaining Wall products supplied by National Masonry are manufactured using raw materials that inherently vary in nature. Whilst all effort is made to produce uniformity in our range of products, variation in colour, texture, and finish can be present. The dimensional characteristics of all products are nominal and variations in length, height, and width can occur from unit to unit which needs to be taken into consideration when installing these products. The honing process grinds 2-3mm from the block surface, producing a matt exposed-aggregate finish. This involves producing a denser block which is honed and then buffed. Polishing enriches the colour of the aggregates. The finely finished polished surface is ideal for feature walls, trims and banding. The splitting process produces a bold textured, exposed aggregate finish. Colour and textures may vary and no two blocks are the same. 6

8 Block & Brick Estimator Tips and details Joint Reinforcement Tram Track Mortar Additive Mortar Additive 20L 50mm Used for 100mm Series Block Bundles of 10 x 3mtr lengths 100mm Used for 150mm Series Block 150mm Used for mm Series Block 20 Litre Drum 20 litres will lay up to 1750 blocks Block & Brick Estimator Full Height Height Qtr Height Std Brick Quick Brick Masonry unit face size (L x H mm) x x x x x 162 No. Units per m Material Quantities for 1m 3 of Mortar For every 800 full height blocks ( long x high) or 64m 2 of wall, approximately 1m 3 of mortar mix is required, allowing for wastage. There are 12.5 full blocks per square metre of wall surface area. M3 M4 Grey Block Mix in 1:1:6 proportions Designer Range Mix in 1:5 proportions Cement 14 bags (20kg each) Cement 16 bags (20kg each) Lime 5 bags (20kg each) Designer Range Additive 8 litres Sand 1.2m 3 Sand 1.2m 3 Mix in 1:0.5:4:5 proportions Mix in 1:4 proportions Cement 18 bags (20kg each) Cement 20 bags (20kg each) Lime 3 bags (20kg each) Designer Range Additive 10 litres Sand 1.2m 3 Sand 1.2m 3 Use clean, sharp sand and allow 20% for bulking. Grout for Core Filling The correct grout specification (mix design) is critical to achieving the structural design of a reinforced wall. The grout used to fill the cores of blockwork walls should be specified as follows: Core Fill Quantities Grout to comply with AS3700 Clause Block Type 1m 3 Grout Characteristic Compressive Strength 20MPa , Cement content not less than 300kg/m Round aggregate (if any) not bigger than 10mm Clean sand (1.2m) A pouring consistency which ensures that the cores are completely filled and the reinforcement completely surrounded without segregation of the Connex 93 constituents. Control Joints Because of temperature variations and the shrinkage in a concrete masonry wall after construction, it is necessary to provide control joints in blockwork at a max. spacing of 6m and at points of potential cracking, e.g. beside openings and at large steps in wall or footing. Joint width is 10mm for panels up to 6000mm long. Joint sealants should be applied towards the end of construction to minimise the effect of panel movement. To find your closest National Masonry stockist, to receive brochures or to learn more about our products, call or visit our website at Colour variations occur from batch to batch. Colours shown are indicative only and should not be used for final selection. Products ordered should be chosen from actual samples current at the time of order and are subject to availability. Photographs in this brochure are only representative of National Masonry products and the appearance and effect that may be achieved by their use. Samples, brochures and displays should be viewed as a guide only. Customers should ensure all delivered products are acceptable, and any concerns about products are made prior to laying. All prices are subject to availability and can be withdrawn or varied without notice. Copyright National Masonry Limited all rights reserved Gardenwall & Keystone are registered trademarks of Keystone Retaining Wall Systems Inc, use under licence by National Masonry. National Masonry, the National Masonry logo, nationalmasonry.com.au, If these and other National Masonry trade marked terms are marked on their first occurrence in this information with a trade mark symbol ( or ), these symbols indicate Australian registered or common law trade marks owned by National Masonry at the time this information was published. Such trade marks may also be registered or common law trade marks in other countries. Other product, company or service names may be trade marks or service marks of others. National Masonry Ltd ABN Correct as at January NAT /05/2013