4 Definitions, Caveats, and Summary Requirements
|
|
- Louise Potter
- 5 years ago
- Views:
Transcription
1 Generic Requirements for Wireless Transceiver Facilities GR-3178-CORE Table of Contents Table of Contents Preface xiii 1 Introduction 1.1 Scope Facilities Outside the Scope of GR Target Audience Structure and Use of This Document Requirements Terminology Requirement Labeling Conventions Numbering of Requirement and Related Objects Requirement, Conditional Requirement, and Objective Identification Requirement Conformance Operational and Exposure Conditions 2.1 Ambient Air Temperatures Outside Plant (OSP) Inside Buildings Operational Temperatures Outside Plant Inside Buildings Field Temperature Measurements Temperature Test Conditions Used in GRs Installation and Storage Conditions 3.1 Wireless Transceiver Facilities and NEBS Installation Conditions Storage and Transportation Conditions Definitions, Caveats, and Summary Requirements 4.1 Introduction Facility Definitions Environmental and Mechanical Caveats Summary Requirements Powering of WiTFs Sealed WiTF Closures and Systems Products with Protective Shields General Design Requirements 5.1 Closure Configurations Installation and Operating Environment Test Conditions/Temperatures Installation Tests Operating Tests Test Environmental Criteria Ambient Laboratory Conditions v
2 GR-3178-CORE Table of Contents Issue 1, December Environmental Chamber Capabilities Thermal Soak Time Calibration Safety Precautions Measurements Sample Selection and Preparation Test Sequence Component Matrix Coordination With GR-3178 and GR Documentation Practices Audio-Visual Training Package Markings, Packaging, and Shipping Identification Shipping Container and Packaging Arrangement Package Label Consumable Materials Quality Product Changes Safety and Reliability Considerations Listing Surface Temperature Requirements External Interfaces - General Features Deployment Configurations Mounting Hardware Components Installation Size and Weight Maintenance Tools Security Cable Management Cable Termination Compartment(s) Cable Compatibility Cable Capacity Cable Termination Hardware Fiber Protection Cable Management Stubbed WiTF Systems Fiber Stub Cable Power Stub Cable Power Interface DC Power Interface Connection AC Power Interface Connection Back-Up Power Source Environment Electromagnetic Compatibility (EMC) - Bonding and Grounding Product Functional Performance Requirements 6.1 Application-Specific Requirements Test Program Test Sequence Sample Preparation vi
3 Generic Requirements for Wireless Transceiver Facilities GR-3178-CORE Table of Contents Test Conditions/Temperatures Non-Conformances and Re-Testing Failure Testing Matrix Closure Surface Criteria (Surface Coating/Paint Tests) Appearance Color and Surface Gloss Coating Defects Paint Adhesion Flexibility Secondary Finish Protection Paint Adhesion After Exposure Ultraviolet Resistance Ozone Exposure Wall-Mounted Equipment Electrical Criteria Bond Clamp Retention AC Fault Test Mechanical Criteria Cable Clamping Sheath Retention Cable Flexing Cable Torsion Installation Shock/Vertical Drop Test Compression Impact Central Member (CM) Protrusion Environmental Criteria Exposure to High Temperature Accelerated Thermal Aging Field Assembly Temperature and Humidity Weathertightness Dust Outdoor Indoor Weathertightness Water Resistance Water Immersion Test Procedure Wind-Driven Rain Test Procedure Water-Spray Test Procedure Lawn Sprinklers Corrosion Resistance Test Procedure (A) - Corrosive Ground Water Test Procedure (B) - Salt Fog Test Chemical Resistance Material Degradation Chemical Immersion Chemical Resistance Tests Insect Resistance Ultraviolet Resistance Fungus Resistance Rodent Resistance vii
4 GR-3178-CORE Table of Contents Issue 1, December Fire Resistance (Brush Fire) Power Cross Ignition Shock and Vibration Installation Shock Environmentally Induced Vibration Earthquake Resistance Package Functional Performance Transportation Shock (Rail) Bullet Resistance Building Fire Resistance Pole/Tower-Mounted Installations Appendix A: Evaluating Dust Accumulation and Wind-Driven Rain Test A.1 Observational Standard for Evaluating Dust Accumulation A 1 A.2 Wind-Driven Rain Test Set-Up Calibration Suggested Procedure A 2 A.2.1 Purpose A 2 A.2.2 Test Set Calibration A 2 Appendix B: References B.1 Telcordia Documents B 1 B.2 Non-Telcordia Documents B 3 B.3 To Obtain Additional Reference Material B 5 B.4 Telcordia Document Sets Family of Requirements (FR) and Family of Documents (FD) B 6 B.5 Telcordia Reference Notes B 7 B.5.1 Contact Telcordia Customer Service B 7 B.5.2 Order Documents Online From the Telcordia SuperStore B 7 B.5.3 Web Sites for Generic Requirements Information B 8 B.5.4 Licensing Agreements for Telcordia Documents B 8 Appendix C: Acronyms Requirement-Object Index viii
5 Generic Requirements for Wireless Transceiver Facilities GR-3178-CORE List of Figures List of Figures Figure 5-1 Deployment Configurations Figure 6-1 Paint Defect Test on Flat Specimens With Cut Edges Figure 6-2 Paint Defect Test on Curved Specimen With Cut Edges Figure 6-3 Test Circuit for Paint Defect Test Figure 6-4 AC Fault Test Figure 6-5 Splicing Assignment for Ribbon Fiber Figure 6-6 Sheath Retention Test Figure 6-7 Cable Flex Test Figure 6-8 Cable Torsion Test Figure 6-9 Compression Test Figure 6-10 Central Member Test Fixture Figure 6-11 Central Member Protrusion Test Figure 6-12 Jacket Clamped With Central Member Free to Move Figure 6-13 Central Member Moves Out of the Cable End as the Jacket Shrinks Figure 6-14 Central Member Clamped With Jacket Free to Move Figure 6-15 Jacket Shrinks Back Relative to the Central Member Figure 6-16 Force Arising From Jacket Shrinkage in a Clamped Situation Figure 6-17 Temperature Cycle Figure 6-18 Water Immersion Tank Figure 6-19 Three-Point Test Fixture Figure 6-20 Test Bar Samples Figure 6-21 Insect Intrusion Figure 6-22 Firearm Resistance Test Setup Figure 6-23 Application of Force to Pole-Mounted Cabinet Figure A-1 Observational Standard A 1 Figure A-2 Wind Speed and Rainfall Verification Fixture A 3 Figure A-3 Reduction of Water Collection Aperture With an Inclined Rain Gauge During Wind-Driven Rain Testing A 3 ix
6 GR-3178-CORE List of Figures Issue 1, December 2014 x
7 Generic Requirements for Wireless Transceiver Facilities GR-3178-CORE List of Tables List of Tables Table 1-1 Detailed Summary of Criteria Table 2-1 Expected Operational Temperature Range Inside Buildings Table 4-1 Summary of Criteria for WiTFs - Active Antennas, DAS (i-das and o-das), Free-Space Optics, Remote Radio Heads, and Small Cells Table 5-1 Installation Test Temperatures Table 5-2 Operating Test Temperatures Table 5-3 Limits for Equipment Table 6-1 Performance Test Sequence Table 6-2 Materials for Coating Defects Test Table 6-3 Ultraviolet Resistance Sources Table 6-4 Sheath Retention Criteria Levels Table 6-5 Vertical Drop Measurements Table 6-6 Compression Test Loading Table 6-7 Impact Criteria Levels Table 6-8 Solar Load Categories Table 6-9 Spectral Distribution of Solar Simulator Table 6-10 Water-Resistance Criteria Levels Table 6-11 Corrosion Resistance Criteria Levels Table 6-12 Chemical Test Solution Table 6-13 Immersion Test Fluids Table 6-14 Ultraviolet Resistance Sources xi
8 GR-3178-CORE List of Tables Issue 1, December 2014 xii
Table of Contents. 1 Introduction. 2 General Information. Generic Requirements Notice of Disclaimer... iii Preface... xi
Generic Requirements for Electronic Equipment Cabinets GR-487-CORE Table of Contents Table of Contents Generic Requirements Notice of Disclaimer..................... iii Preface............................................
More informationTable of Contents. 1 Introduction. 2 General Information. Preface... xi
Generic Requirements for Electronic Equipment Cabinets GR-487-CORE Table of Contents Table of Contents Preface............................................ xi 1 Introduction 1.1 Purpose and Scope..................................
More informationVerizon 2017 All Rights Reserved Information contained herein is subject to change without notice.
Verizon NEBS TM Compliance: Generic Requirements for Fiber Distribution Hubs (FDH s) Verizon Technical Purchasing Requirements VZ.TPR.9417 Issue 5, March 2017 CHANGE CONTROL RECORD: Version Date Action*
More informationGR-771-CORE Generic Requirements for Fiber Optic Splice Closures Issue 2, July 2008 Performance Requirements and Objectives
Generic Requirements for Fiber Optic Splice Closures Issue 2, July 2008 5.4.4.1 Freeze/Thaw Test Method 1. Place the samples into a water tank containing a water soluble fluorescent dye (sodium-fluorescein
More informationGeneric Requirements for Optical Fiber and Optical Fiber Cable
Contents Generic Requirements for Optical Fiber and Optical Fiber Cable Contents Telcordia GR-20 - Documentation Information Preface... Preface 1 1. Introduction... 1 1 1.1 Purpose and Scope... 1 1 1.2
More informationTelcordia Contact: Ernie Gallo Director Network and Product Integrity
OSP Access Network Testing Telcordia Contact: Ernie Gallo Director Network and Product Integrity egallo@telcordia.com 732.699.3312 1 Why the need for testing and requirements The quality of network service
More informationDETAIL SPECIFICATION SHEET INTERCONNECTING BOX, FIBER OPTIC, FUSION SPLICE TRAY AND TRAY HOLDER MODULE
METRIC MIL-DTL-24728/8A 10 December 2009 SUPERSEDING MIL-DTL-24728/8 28 June 2007 DETAIL SPECIFICATION SHEET INTERCONNECTING BOX, FIBER OPTIC, FUSION SPLICE TRAY AND TRAY HOLDER MODULE This specification
More informationGR-418-CORE Reliability Assurance for Fiber Optic Systems
Preface...................................... Preface-1 1. Introduction.................................... 1-1 1.1 Scope and Purpose............................ 1-1 1.2 Changes From Previous Issues......................
More informationDURATEQ 3100 Conforms to MIL-STD 810F
DURATEQ 3100 Conforms to MIL-STD 810F Objective: Company Softeq Development Corporation Name of Case Study DURATEQ 3100 Passes MIL-STD 810F Testing Industry Hardware and Custom Software Development Solution
More informationPERFORMANCE SPECIFICATION SHEET SPLICE, MECHANICAL, SIMPLEX FIBER OPTIC CABLE, AIRCRAFT
METRIC PERFORMANCE SPECIFICATION SHEET MIL-PRF-24623/7A 03 July 2013 SUPERSEDING MIL-PRF-24623/7 27 August 2010 SPLICE, MECHANICAL, SIMPLEX FIBER OPTIC CABLE, AIRCRAFT This specification is approved for
More informationMIL-DTL-24728/8 28 June 2007 DETAIL SPECIFICATION SHEET INTERCONNECTING BOX, FIBER OPTIC, FUSION SPLICE TRAY AND TRAY HOLDER MODULE
METRIC MIL-DTL-24728/8 28 June 2007 DETAIL SPECIFICATION SHEET INTERCONNECTING BOX, FIBER OPTIC, FUSION SPLICE TRAY AND TRAY HOLDER MODULE This specification is approved for use by all Departments and
More informationDETAIL SPECIFICATION SHEET INTERCONNECTING BOX, FIBER OPTIC, SPLICE TRAY HOLDER MODULE, 8 TRAY
METRIC MIL-DTL-24728/11 8 January 2015 SUPERSEDING MIL-DTL-24728/11 W/AMENDMENT 1 19 September 2012 DETAIL SPECIFICATION SHEET INTERCONNECTING BOX, FIBER OPTIC, SPLICE TRAY HOLDER MODULE, 8 TRAY This specification
More informationPERFORMANCE SPECIFICATION SHEET
METRIC MIL-PRF-85045/17C 17 June 2014 SUPERSEDING MIL-PRF-85045/17B 16 September 1999 PERFORMANCE SPECIFICATION SHEET CABLE, FIBER OPTIC, EIGHT FIBERS, ENHANCED PERFORMANCE, CABLE CONFIGURATION TYPE 2
More informationShielding Effectiveness Measurement of EMI Gaskets and Flange Treatments Subjected to Salt Fog Exposure (20 x 20 Aperture)
CHO-TM201 July/1992 Shielding Effectiveness Measurement of EMI Gaskets and Flange Treatments Subjected to Salt Fog Exposure (20 x 20 Aperture) Prepared By: David C. Inman Test Service Technical Manager
More informationPRODUCT SPECIFICATION
1 of 23 B 1.0 GENERAL Scope This specification covers the insulation piercing Quickie Backplane Connector System designed for Backplane-to-flat cable (round conductor) interconnection in low power applications.
More informationPERFORMANCE SPECIFICATION SHEET
INCH-POUND MIL-PRF-29504/18 25 November 2008 PERFORMANCE SPECIFICATION SHEET TERMINI, FIBER OPTIC, CONNECTOR, REMOVABLE, ENVIRONMENT RESISTING, GENDERLESS TERMINUS, REAR RELEASE, CERAMIC FERRULE, 1.25
More informationSPECIFICATION OPTICAL TERMINATION PANEL
SPECIFICATION OPTICAL TERMINATION PANEL Model Spec. No. VSOF-OTP-H VSS-0809-OTP-H-01A/SD Quality Assurance Team Distribution Depts. Manufacturing Division Sales Division Management Division Revision 09.
More informationRB 107 Specification DuraSeal Splices
00 Constitutional Drive 1 of 1 RB 107 Specification DuraSeal Splices 1.0 Introduction 1.1 Scope This specification covers a series of one-piece pre-insulated crimp splices having a heatshrinkable sleeve
More informationSPECIFICATIONS FOR AluSystems Aluminum Composite Panels Series 20 Dry Joint 1.00 GENERAL 1.01 RANGE OF WORK Section includes: Laminated panels and attachment systems for use as exterior cladding. A. Provide
More informationGeneric Requirements for Separable Electrical Connectors Used In Telecommunications Hardware
Generic Requirements for Separable Electrical Connectors Used In Telecommunications Hardware Telcordia GR-1217 - Documentation Information Preface...Preface 1 1. Introduction... 1 1 1.1 Scope... 1 1 1.2
More informationENGINEERING COMMITTEE Interface Practices Subcommittee AMERICAN NATIONAL STANDARD ANSI/SCTE
ENGINEERING COMMITTEE Interface Practices Subcommittee AMERICAN NATIONAL STANDARD Passive Network Device (NID) Enclosure Specification NOTICE The Society of Cable Telecommunications Engineers (SCTE) Standards
More informationFIBER OPTIC SPLICE CLOSURE
SPECIFICATION FIBER OPTIC SPLICE CLOSURE Model Spec. No. Distribution Depts. VSOF-MN401A VSS-0911-OFC-01A Quality Assurance Team Manufacturing Division Sales Division Management Division Revision 09. 11
More informationSeismic Qualification Test Protocols, Standards and Methodology
Task NA 3.6 Preparatory Course on Seismic Qualification Bristol, 11-12 January 2011 Seismic Qualification Test Protocols, Standards and Methodology Chris Stone, TRaC Global Limited TRaC Global Limited
More informationSOLARLOK BREEZE Junction Box
SOLARLOK BREEZE Junction Box Table of contents 1. SCOPE... 2 1.1. Content... 2 1.2. Qualification... 3 2. APPLICABLE DOCUMENTS... 3 2.1. TE Connectivity Documents... 3 2.2. Commercial Standard... 3 3.
More informationAutomotive Components Testing
Presented By: Mr. Chanachai Marangsri Introduction Objective of components testing: The tests required to validate a product that will simulate the stresses and exposures related to its intended environment.
More informationPERFORMANCE SPECIFICATION SHEET
METRIC MIL-PRF-85045/25B 17 June 2014 SUPERSEDING MIL-PRF-85045/25A 19 January 2010 PERFORMANCE SPECIFICATION SHEET CABLE, FIBER OPTIC, SEVEN TUBE, BLOWN OPTICAL FIBER, STANDARD AND ENHANCED PERFORMANCE,
More informationForeword... xiii Preface... xv Acknowledgments... xvii. Chapter 1 - Ceramics, Raw Materials, and Processing... 1
Foreword... xiii Preface... xv Acknowledgments... xvii Chapter 1 - Ceramics, Raw Materials, and Processing... 1 1.1 Materials... 1 1.2 Manufacturing Process... 2 Chapter 2 - How to Use What We Have Learned...
More informationTelecommunication Spaces
Telecommunication Spaces October 19, 2016 Page 1 Revision History Telecommunication Spaces Standard Effective Date Email Version Contact Phone OIT-TS strevena@csustan.edu 1.0 Stan Trevena 209.667.3137
More informationSpecial Specification 6292 Radar Vehicle Detection System for Signalized Intersection Control
Special Specification 6292 Radar Vehicle Detection System for Signalized Intersection Control 1. DESCRIPTION 2. MATERIALS Furnish, install, relocate, or remove radar vehicle detection systems (RVDS) of
More informationRN Optical Termination Panel (RN OTP)
RN Optical Termination Panel (RN OTP) General The RN Optical Termination Panel(RN OTP) is specifically designed to house optical splitters while also catering for fiber termination in a single enclosure.
More informationA Study of Environmental Test Sequences for Electrical Units Jung Ho Yang, Yong Soo Kim
A Study of Environmental Test Sequences for Electrical Units Jung Ho Yang, Yong Soo Kim Abstract Electrical units are operated by electrical and electronic components. An environmental test sequence is
More informationPERFORMANCE SPECIFICATION SHEET
METRIC MIL-PRF-85045/22A 17 June 2014 SUPERSEDING MIL-PRF-85045/22 26 July 1999 PERFORMANCE SPECIFICATION SHEET CABLE, FIBER OPTIC, EIGHTEEN FIBERS, STANDARD AND ENHANCED PERFORMANCE, CABLE CONFIGURATION
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 ELEMENT MATERIALS TECHNOLOGY PORTLAND 1 5245-A NE Elam Young Pkwy Hillsboro, OR 97124 Sandra Frank Phone: 561-529-1488 Email: sandra.frank@element.com MECHANICAL
More informationTEST PROCEDURE SUMMARY
TEST PROCEDURE SUMMARY 1. Compressive Strength - ASTM D695 The compressive strength of a product is determined by subjecting a solid cylinder of material whose length is equal to twice its diameter to
More informationIEC Installation Guide for SERAPHIM Photovoltaic Module
SUSA [InstallationGuide] 2016.11_V1.0 IEC Installation Guide for SERAPHIM Photovoltaic Module Table of Contents 2 Purpose of this guide General safety Handling safety Installation safety Fire safety 5
More informationMATERIAL SPECIFICATION FOR UNINTERRUPTIBLE POWER SUPPLY SYSTEMS FOR LED TRAFFIC SIGNALS
ONTARIO PROVINCIAL STANDARD SPECIFICATION METRIC OPSS.PROV 2475 April 2017 MATERIAL SPECIFICATION FOR UNINTERRUPTIBLE POWER SUPPLY SYSTEMS FOR LED TRAFFIC SIGNALS TABLE OF CONTENTS 2475.01 SCOPE 2475.02
More informationIEEE 1580 Type P MOR Polyrad XT-125 Multi Conductor
TABLE OF CONTENTS SECTION SUBJECT PAGE I. SCOPE...1 II. APPLICABLE DOCUMENTS...1 III. CONDUCTOR...2 IV. SEPARATOR...2 V. INSULATION...2 A. Physical Properties...2 B. Electrical Properties...3 C. Qualification
More informationPERFORMANCE SPECIFICATION SHEET
METRI MIL-PRF-85045/20B 17 June 2014 SUPERSEDING MIL-PRF-85045/20A 16 September 1999 PERFORMANE SPEIFIATION SHEET ABLE, FIBER OPTI, THIRTY-SIX FIBERS, ENHANED PERFORMANE, ABLE ONFIGURATION TYPE 2 (OF),
More information3M Cold Shrink Silicone Rubber Connector Insulators 8440 Series
3M Cold Shrink Silicone Rubber Connector Insulators 8440 Series Data Sheet May 2014 Product Description 3M Cold Shrink Connector Insulators 8440 Series are open-ended, silicone rubber, tubular sleeves.
More informationPERFORMANCE SPECIFICATION SHEET
METRIC MIL-PRF-85045/21 26 July 1999 PERFORMANCE SPECIFICATION SHEET CABLE, FIBER OPTIC, EIGHT FIBERS, ENHANCED PERFORMANCE, CABLE CONFIGURATION TYPE 2 (OFCC), FOR SUBMARINE OUTBOARD USE ONLY (NOT FOR
More informationSECTION FIBERGLASS REINFORCED PLASTIC (FRP) ENCLOSURE
SECTION 13121 FIBERGLASS REINFORCED PLASTIC (FRP) ENCLOSURE PART 1 - GENERAL 1.01 SUMMARY A. This section covers materials and accessories for provision of a pre-engineered fiberglass reinforced plastic
More informationScope of Accreditation For Retlif Testing Laboratories
Scope of Accreditation For Retlif Testing Laboratories 795 Marconi Avenue Ronkonkoma NY 11779 Robert Lenker 215-256-4133 x360 In recognition of a successful assessment to ISO/IEC 17025:2005 and the requirements
More informationPERFORMANCE SPECIFICATION SHEET CABLE, FIBER OPTIC, SINGLE (ONE) FIBER, CABLE CONFIGURATION TYPE 2 (OFCC), TIGHT BUFFER, CABLE CLASS SM AND MM
METRIC MIL-PRF-85045/16C 17 June 2014 SUPERSEDING MIL-PRF-85045/16B 16 September 1999 PERFORMANCE SPECIFICATION SHEET CABLE, FIBER OPTIC, SINGLE (ONE) FIBER, CABLE CONFIGURATION TYPE 2 (OFCC), TIGHT BUFFER,
More informationPRODUCT SPECIFICATION. This specification defines the performance, test, quality and reliability requirements of the BarKlip I/O Cable system.
1 of 10 7 1.0 Objective This specification defines the performance, test, quality and reliability requirements of the BarKlip I/O Cable system. 2.0 Scope This specification is applicable to the termination
More informationIntertek Airport Lighting Equipment Certification Program
Intertek Airport Lighting Equipment Certification Program IES Government Contacts Subcommittee, October 22, 2013 IES Airport Lighting Conference, Tucson, AZ Jeremy N. Downs, P.E. Staff Engineer Airport
More informationPRODUCT SPECIFICATION. ExaMAX RAR BACKPLANE RIGHT ANGLE RECEPTACLE (RAR) COPLANAR RIGHT ANGLE RECEPTACLE (RAR)
1 of 15 J ExaMAX VH ExaMAX RAH ExaMAX RAR ExaMAX RAR BACKPLANE RIGHT ANGLE RECEPTACLE (RAR) COPLANAR RIGHT ANGLE RECEPTACLE (RAR) AND VERTICAL HEADER (VH) AND RIGHT ANGLE HEADER (RAH) (4-Pair, 10-Column
More informationData Bus Connector and Terminator Requirements Document DB-1001-A. Revision C
Data Bus Connector and Terminator Requirements Document DB-1001-A Revision C 2507 W. Geneva Dr. Tempe, Arizona 85282 Phone [602] 231-8616 FAX [602] 273-9135 www.phxlogistics.com TABLE OF CONTENTS 1. Introduction
More informationWhat Forges High Reliability
What Forges High Reliability ----Endurance Tests of Huawei Inverters PV system is normally installed outdoor,exposed to hash environment, like extreme high or low temperature, high humidity, strong wind,
More informationPERFORMANCE SPECIFICATION SPLICE, FIBER OPTIC CABLE GENERAL SPECIFICATION FOR (METRIC)
METRIC MIL-PRF-24623C 24 May 2001 SUPERSEDING MIL-S-24623B 10 June 1991 MIL-S-0024623A (NAVY) 26 June 1989 DOD-S-24623 25 March 1985 PERFORMANCE SPECIFICATION SPLICE, FIBER OPTIC CABLE GENERAL SPECIFICATION
More information.2 The scales and automated system for each of the three (3) scales shall be supplied from a single manufacturer.
New Entrance and Scale Facility Page 1 of 6 1. GENERAL 1.1 Work Included.1 The intent of the work under this section is to supply and install three (3) complete low profile platform (pitless) truck scales
More informationSPECIFICATION SHEET REQUIREMENTS FOR HRB SERIES FERRITE CHIP BEADS
11525 Sorrento Valley Rd. San Diego, California 92121 (858) 481-0210 SPECIFICATION SHEET REQUIREMENTS FOR HRB SERIES FERRITE CHIP BEADS REVISION: A B C DATE: 4/01 3/02 5/03 DRAWN: Jeff Montgomery Drawing:
More information3M Medium-Wall Heat Shrink Tubing IMCSN
3M Medium-Wall Heat Shrink Tubing IMCSN Data Sheet April 2017 Product Description 3M Medium-Wall Heat Shrink Tubing IMCSN is designed to provide reliable performance for electrical splices, connections,
More informationSECTION WELDED STEEL PICKET FENCE. 1. Fusion welded and rackable ornamental steel picket fence system.
PART 1 - GENERAL 1.1 SUMMARY A. Section includes: 1. Fusion welded and rackable ornamental steel picket fence system. B. Related sections: 1. Section 03310 Concrete Work for post support. 2. Section 09960
More information3M Heavy Wall Heat Shrink Tubing ITCSN
3M Heavy Wall Heat Shrink Tubing ITCSN Data Sheet September 2013 Description 3M Heavy Wall Heat Shrink Tubing ITCSN is designed to provide reliable performance for electrical splices, connections, and
More informationSERIES 800 / 810 SPECIFICATION 15KV & 25KV PADMOUNTED LIQUID-INSULATED VACUUM LOAD INTERRUPTER ASSEMBLIES
SERIES 800 / 810 SPECIFICATION 15KV & 25KV PADMOUNTED LIQUID-INSULATED VACUUM LOAD INTERRUPTER ASSEMBLIES MANUALLY OPERATED / REMOTELY OPERATED DEAD FRONT PADMOUNTED SWITCHGEAR WITH VACUUM LOAD INTERRUPTING
More informationCold Shrink EPDM Tubes Connector Insulators 8420 Series
Product Description PST features are: Applications 6 Figure 1 Page 2 of 6 Data: Physical & Electrical Properties PST Selection Table Min. diameter (mm) Max. diameter (mm) Length (mm) 8423-6 7.8 14.3 152
More information3M Electrically Conductive Adhesive Transfer Tape 9707
Technical Data May 2014 3M Electrically Conductive Adhesive Transfer Tape 9707 Product Description 3M Electrically Conductive Adhesive Transfer Tape (ECATT) 9707 is a pressure sensitive adhesive (PSA)
More informationSECTION P -- CABLE VAULT AND CABLE ENTRANCE FACILITY
INSTLLTION REQUIREMENTS Section P, TT-TP-76300 T&T January 2012 Revised July, 2012 SECTION P -- CLE VULT ND CLE ENTRNCE FCILITY CONTENTS PGE 1. GENERL... P-1 1.1. Introduction... P-1 1.2. Non-Insulating
More informationFeb12 Rev D
Product Specification AMPSEAL* Connectors 108-1329 01Feb12 Rev D 1. SCOPE 1.1. Content This specification covers performance, tests and quality requirements for AMPSEAL* connectors. 1.2. Qualification
More informationAdvanced Materials and Design for Electromagnetic Interference Shielding
Advanced Materials and Design for Electromagnetic Interference Shielding Xingcun Colin Tong f-ep) CRC Press VV^ J Taylor&. Francis Group Boca Raton London New York CRC Press is an imprint of the Taylor
More informationSILVER LINE BUILDING PRODUCTS
DIVISION 08 / SECTION 08560, VINYL WINDOWS SILVER LINE BUILDING PRODUCTS SPECIFICATIONS: 2200/2300/2600 Vinyl Single Hung Windows R50/R30 Performance for New Construction GENERAL 1. SECTION INCLUDES 2.
More information3M Medium-Wall Heat Shrink Tubing IMCSN
3M Medium-Wall Heat Shrink Tubing IMCSN Data Sheet November 2017 Product Description 3M Medium-Wall Heat Shrink Tubing IMCSN is designed to provide reliable performance for electrical splices, connections,
More informationSeries 4900 Vinyl Single Hung Windows R50/R45/R35/R30 Performance for New Construction
SPECIFICATIONS: Series 4900 Vinyl Single Hung Windows R50/R45/R35/R30 Performance for New Construction GENERAL 1. SECTION INCLUDES 2. RELATED SECTIONS 3. QUALITY ASSURANCE A. General. B. Test Units. 1.
More informationInsulation. First Revison October DC14 Drainage Mat INSTALLATION GUIDE FOR RESIDENTIAL & COMMERCIAL APPLICATIONS
Insulation First Revison October 2016 DC14 Drainage Mat INSTALLATION GUIDE FOR RESIDENTIAL & COMMERCIAL APPLICATIONS 1. General Information This Guide describes the use of Kingspan GreenGuard DC14 Drainage
More informationMANUFACTURER S (SHORT FORM) SPECIFICATION / SECTION
STUC-O-FLEX - ELASTOMERIC ACRYLIC FINISH APPLICATION TO PORTLAND CEMENT PLASTER / CONCRETE RENDER MANUFACTURER S (SHORT FORM) SPECIFICATION / SECTION 09220-09 24 00 PART 1-GENERAL SCOPE: Manufacturer's
More informationMANUFACTURERS (SHORT FORM) SPECIFICATION / SECTION
STUC-O-FLEX - ELASTOMERIC ACRYLIC FINISH APPLICATION TO PORTLAND CEMENT PLASTER / CONCRETE RENDER MANUFACTURERS (SHORT FORM) SPECIFICATION / SECTION 09220-09 24 00 PART 1-GENERAL SCOPE: Manufacturer's
More informationHANDBOOK OF DIE DESIGN
HANDBOOK OF DIE DESIGN Ivana Suchy Consultant, Design Engineer Fair Lawn, New Jersey Second Edition McGRAW-HILL New York Chicago San Francisco Lisbon London Madrid Mexico City Milan New Delhi San Juan
More informationSPECIFICATIONS FOR. CEI Composite Materials, LLC Featuring R4000 Rear Back Ventilated Rainscreen System. Section Aluminum Composite Panels
SPECIFICATIONS FOR (1/13 Edition) CEI Composite Materials, LLC Featuring R4000 Rear Back Ventilated Rainscreen System Section 074243 Aluminum Composite Panels (Based upon CEI Composite Materials R4000
More informationDESIGN GUIDELINES WIRING AND CONDUITS PAGE 1 of 7
DESIGN GUIDELINES WIRING AND CONDUITS PAGE 1 of 7 1.1. REFERENCE STANDARDS 1.1.1. Publications listed below (including amendments, addenda, revisions, supplements and errata) form a part of this specification
More informationOptical Gateway Interface (OGI) Connector System Qualification Test Result Summary Telcordia GR 1435 CORE
Optical Gateway Interface (OGI) Connector System Qualification Test Result Summary Telcordia GR 1435 CORE (Generic Requirements for Multi-Fiber Optical Connectors) Technical Report June 2003 78-8133-4065-6-A
More informationPERFORMANCE SPECIFICATION SHEET
METRIC 16 September 1999 SUPERSEDING MIL-C-85045/18A 26 May 1995 PERFORMANCE SPECIFICATION SHEET CABLE, FIBER OPTIC, FOUR FIBERS, ENHANCED PERFORMANCE, CABLE CONFIGURATION TYPE 2 (OFCC), APPLICATION B
More informationLazrSPEED 150 MPO (male) to MTRJ, ReadyPATCH Ruggedized Fanout, 36-Fiber, Plenum
F0HMXMJAG LazrSPEED 150 MPO (male) to MTRJ, ReadyPATCH Ruggedized Fanout, 36-Fiber, Plenum Product Classification Portfolio Brand Product Type Regional Availability Uniprise LazrSPEED ReadyPATCH Fiber
More informationES2000 TUBING Environmental Sealing, Polyolefin, Semirigid, Adhesive-Lined
Tyco Electronics Corporation 305 Constitution Drive Menlo Park, CA 94025 USA Raychem Tubing SPECIFICATION: THIS ISSUE: DATE: REPLACES: RT-1112 Issue 5 April 22, 2008 Issue 4 ES2000 TUBING Environmental
More informationSCOPE OF ACCREDITATIONTO ISO/IEC 17025:2005
SCOPE OF ACCREDITATIONTO ISO/IEC 17025:2005 LYDALL THERMAL / ACOUSTICAL GROUP MATERIAL TESTING LABORATORIES 1241 Buck Shoals Road Hamptonville, NC 27020 Mr. Shane Jolly Phone: 336 468 8598 MECHANICAL Valid
More informationwww.cszindustrial.com Solar Panel Testing Chambers CSZ provides a selection of standard & custom solar panel test chambers for testing various size photovoltaic modules and solar panels. These chambers
More information2016 V1 SERAPHIM ECLIPSE PHOTOVOLTAIC MODULE JIANGSU SERAPHIM PHOTOVOLTAIC SYSTEM CO. LTD. ADDRESS: JIANGSU CITY OF CHANGZHOU PROVINCE WANG ZHEN HENG
016 V1 SERAPHIM ECLIPSE JIANGSU SERAPHIM PHOTOVOLTAIC SYSTEM CO. LTD. ADDRESS: JIANGSU CITY OF CHANGZHOU PROVINCE WANG ZHEN HENG ROAD NO. 1-. TELEPHONE: +86-519-8877608 FAX: +86-519-88786181 MAILBOX: info@seraphim-energy.com
More informationSeries 2900 Vinyl Single Hung Windows R50/R45/R35/R30 Performance for New Construction
SPECIFICATIONS: Series 2900 Vinyl Single Hung Windows R50/R45/R35/R30 Performance for New Construction GENERAL 1. SECTION INCLUDES 2. RELATED SECTIONS 3. QUALITY ASSURANCE A. General. B. Test Units. 1.
More informationTECHNICAL STATEMENT OF REQUIREMENT (TSOR)
TECHNICAL STATEMENT OF REQUIREMENT (TSOR) Surface Off-board Passive Decoy System Version: 1.4 1 07 June 2016 TABLE OF CONTENTS Annex B 1 INTRODUCTION... 6 1.1 OBJECTIVE... 6 1.2 BACKGROUND... 6 2 SYSTEM
More informationSECTION HIGH PERFORMANCE COATINGS Ramuc Type EP Epoxy Updated October 5, 2015
Specification Provided To: Date: Job: PART 1 GENERAL 1.1 SECTION INCLUDES SECTION 09 96 60 HIGH PERFORMANCE COATINGS Ramuc Type EP Epoxy Updated October 5, 2015 A. Paints and coatings of the following
More informationEC-250 AAMA Pressure-Equalized Aluminum Plate Rainscreen East Coast Metal System
EC-250 AAMA 508-07 Pressure-Equalized Aluminum Plate Rainscreen East Coast Metal System SECTION 074213.16 ALUMINUM PLATE PANELS PART 1 GENERAL 1.1 SECTION INCLUDES A. ALUMINUM PLATE PANELS USED AS EXTERIOR
More informationSX-FOSC-D-96 Dome Heat Shrinkable Seal Fiber Optic Splice Closure (FOSC)
SX-FOSC-D-96 Dome Heat Shrinkable Seal Fiber Optic Splice Closure (FOSC) Installation Manual 1. Scope of application This Installation Manual suits for the Fiber Optic Splice Closure (Hereafter abbreviated
More informationConstruction Materials. Dimensions. Environmental Specifications. General Specifications. Regulatory Compliance/Certifications.
Construction Materials Fiber Type Total Fibers, quantity 2 Armor Type Furcation Color Jacket Color HFT412-2S29F-15 HELIAX FiberFeed Hybrid Cable Assembly, 6-OVP box to RRU, UL Type TC-ER, 4 power conductors
More informationSSL Series 1.2 IP X8 waterproof solution. Product Data Sheet. REV. 0, 2014 August
SSL Series 1.2 IP X8 waterproof solution Product Data Sheet REV. 0, 2014 August General Specification Number of Positions Current Rating Wire Information Voltage Rating Dielectric Withstand Voltage Durability
More information12-SDMS-01 Rev.02 SPECIFICATIONS FOR
12-SDMS-01 Rev.02 SPECIFICATIONS FOR CABLE JOINTS, TERMINATIONS, AND ACCESSORIES UP TO 36 KV This specification is property of SEC and is subject to change or modification without any notice. TABLE OF
More informationSECTION VIBRATION AND SEISMIC CONTROLS FOR ELECTRICAL SYSTEMS
PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions, apply to this Section. 1.2 SUMMARY A. This Section includes the
More informationWACEL STUDY GUIDE. Reinforced Concrete Special Inspector (Concrete II)
WACEL STUDY GUIDE Reinforced Concrete Special Inspector (Concrete II) June 2017 Concrete II Study Guide Examination: The Concrete II examination is based on the references cited in this document. It is
More informationMark R. Chrusciel. Director of Sales. For a copy of the slides
Mark R. Chrusciel Director of Sales For a copy of the slides email: chrusciel@cszinc.com Who is CSZ? CSZ is a third generation family owned company which opened for business in 1940. The CSZ organization
More informationStructural Composite Materials
Structural Composite Materials F.C. Campbell The Materials Information Society ASM International Materials Park, Ohio 44073-0002 www.asminternational.org Contents Preface About the Author xi xv Chapter
More informationXMP i. Precision Pressure Transmitter for the Process Industry with HART -Communication. Stainless Steel Sensor
Precision Pressure Transmitter for the Process Industry with HART -Communication Stainless Steel Sensor accuracy according to IEC 0770: 0. % FSO Nominal pressure from 0... 00 mbar up to 0... 00 bar Output
More informationCOLD SOLVENT CLEANING AND STRIPPING OPERATIONS (Adopted & Effective 5/23/07) (2) Any cleaning of application equipment is not subject to this rule.
RULE 67.6.1 COLD SOLVENT CLEANING AND STRIPPING OPERATIONS (Adopted & Effective 5/23/07) (a) APPLICABILITY (1) Except as provided in Section (b), this rule is applicable to all cold solvent cleaning and
More informationDownloaded from
Long term minimum bend diameter: Sixteen times the cable outer diameter. Minimum continuous length: The minimum continuous length of all cables shall be not less than 0.5 km. If lengths less than 0.5 km
More informationDMS HIGH MAST LIGHT FIXTURES
DMS - 11020 EFFECTIVE DATE: JANUARY 2012 11020.1. Description. This specification governs the materials, composition, and quality of 400 watt (W) high pressure sodium (HPS) tenon-mounted high mast light
More informationINTER PLANT STANDARD STEEL INDUSTRY
INTER PLANT STANDARD STEEL INDUSTRY IPSS SPECIFICATION FOR PROTECTIVE PANELS FOR dc CRANES (Second Revision) Corresponding IS does not exist IPSS:1-10-013-11 Formerly : IPSS: 1-10-013-03 0. FOREWORD 0.1
More informationA. Section includes busway and fittings including plug-in units.
SECTION 26 25 00 ENCLOSED BUS ASSEMBLIES PART 1 - GENERAL 1.1 SUMMARY A. Section includes busway and fittings including plug-in units. 1.2 REFERENCES A. Institute of Electrical and Electronics Engineers:
More informationMar11 Rev C
Product Specification 108-1163-4 11Mar11 Rev C Eight Position Right Angle Inverted Multiple Port Modular Jack With & Without LED s 1. SCOPE 1.1. Content This specification covers the performance, tests
More informationXMP i. Precision Pressure Transmitter for the Process Industry with HART -Communication. Stainless Steel Sensor
Precision Pressure Transmitter for the Process Industry with HART -Communication Stainless Steel Sensor accuracy according to IEC 0770: 0. % FSO Nominal pressure from 0... 400 mbar up to 0... 00 bar Output
More informationList of Environmental Test related MIL-STD-810 etc.
미국방규격및관련환경시험항목입니다. TEST Altitude Temperature/ Altitude Method applied ASTM D4169 14; DEF STAN 00 35, Part 3, Issue 4:2006: Chapter 3 09 Test CL9 Rapid and Explosive Decompression; GR 63 CORE, Issue 1 Paragraph
More informationReenterable PST Dome Closure
Reenterable PST Dome Closure Technical Report September 1999 80-6111-6055-9-A 1 2 Contents: 1.0 Product Description... 4 1.1 Kit Contents... 4 1.2 Material Composition... 5 1.3 Closure Capacity... 6 2.0
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 DAYTON T. BROWN, INC. 1175 Church Street Bohemia, NY 11716-5031 Mary Alice Der Aris Phone: 631 244 6315 / 1 800 TEST456 Fax: 631 589 4046 Email: test@dtbtest.com
More information